aspeed: correct sram address in ast2400.dtsi #29

mdmillerii · 2015-12-10T01:24:42Z

Correct address of sram in ast2400.dtsi.

The sram reg and name properties were missing a zero. It was more obvious when looking at the platform device names which put the address before the generic name. Signed-off-by: Milton Miller <miltonm@us.ibm.com>

shenki · 2015-12-10T02:57:27Z

Thanks, merged as 2eaa566

…rol enabling Consider the following v2 hierarchy. P0 (+memory) --- P1 (-memory) --- A \- B P0 has memory enabled in its subtree_control while P1 doesn't. If both A and B contain processes, they would belong to the memory css of P1. Now if memory is enabled on P1's subtree_control, memory csses should be created on both A and B and A's processes should be moved to the former and B's processes the latter. IOW, enabling controllers can cause atomic migrations into different csses. The core cgroup migration logic has been updated accordingly but the controller migration methods haven't and still assume that all tasks migrate to a single target css; furthermore, the methods were fed the css in which subtree_control was updated which is the parent of the target csses. pids controller depends on the migration methods to move charges and this made the controller attribute charges to the wrong csses often triggering the following warning by driving a counter negative. WARNING: CPU: 1 PID: 1 at kernel/cgroup_pids.c:97 pids_cancel.constprop.6+0x31/0x40() Modules linked in: CPU: 1 PID: 1 Comm: systemd Not tainted 4.4.0-rc1+ #29 ... ffffffff81f65382 ffff88007c043b90 ffffffff81551ffc 0000000000000000 ffff88007c043bc8 ffffffff810de202 ffff88007a752000 ffff88007a29ab00 ffff88007c043c80 ffff88007a1d8400 0000000000000001 ffff88007c043bd8 Call Trace: [<ffffffff81551ffc>] dump_stack+0x4e/0x82 [<ffffffff810de202>] warn_slowpath_common+0x82/0xc0 [<ffffffff810de2fa>] warn_slowpath_null+0x1a/0x20 [<ffffffff8118e031>] pids_cancel.constprop.6+0x31/0x40 [<ffffffff8118e0fd>] pids_can_attach+0x6d/0xf0 [<ffffffff81188a4c>] cgroup_taskset_migrate+0x6c/0x330 [<ffffffff81188e05>] cgroup_migrate+0xf5/0x190 [<ffffffff81189016>] cgroup_attach_task+0x176/0x200 [<ffffffff8118949d>] __cgroup_procs_write+0x2ad/0x460 [<ffffffff81189684>] cgroup_procs_write+0x14/0x20 [<ffffffff811854e5>] cgroup_file_write+0x35/0x1c0 [<ffffffff812e26f1>] kernfs_fop_write+0x141/0x190 [<ffffffff81265f88>] __vfs_write+0x28/0xe0 [<ffffffff812666fc>] vfs_write+0xac/0x1a0 [<ffffffff81267019>] SyS_write+0x49/0xb0 [<ffffffff81bcef32>] entry_SYSCALL_64_fastpath+0x12/0x76 This patch fixes the bug by removing @css parameter from the three migration methods, ->can_attach, ->cancel_attach() and ->attach() and updating cgroup_taskset iteration helpers also return the destination css in addition to the task being migrated. All controllers are updated accordingly. * Controllers which don't care whether there are one or multiple target csses can be converted trivially. cpu, io, freezer, perf, netclassid and netprio fall in this category. * cpuset's current implementation assumes that there's single source and destination and thus doesn't support v2 hierarchy already. The only change made by this patchset is how that single destination css is obtained. * memory migration path already doesn't do anything on v2. How the single destination css is obtained is updated and the prep stage of mem_cgroup_can_attach() is reordered to accomodate the change. * pids is the only controller which was affected by this bug. It now correctly handles multi-destination migrations and no longer causes counter underflow from incorrect accounting. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-tested-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Aleksa Sarai <cyphar@cyphar.com>

commit fc27fe7 upstream. ALSA sequencer core has a mechanism to load the enumerated devices automatically, and it's performed in an off-load work. This seems causing some race when a sequencer is removed while the pending autoload work is running. As syzkaller spotted, it may lead to some use-after-free: BUG: KASAN: use-after-free in snd_rawmidi_dev_seq_free+0x69/0x70 sound/core/rawmidi.c:1617 Write of size 8 at addr ffff88006c611d90 by task kworker/2:1/567 CPU: 2 PID: 567 Comm: kworker/2:1 Not tainted 4.13.0+ #29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: events autoload_drivers Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x192/0x22c lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x230/0x340 mm/kasan/report.c:409 __asan_report_store8_noabort+0x1c/0x20 mm/kasan/report.c:435 snd_rawmidi_dev_seq_free+0x69/0x70 sound/core/rawmidi.c:1617 snd_seq_dev_release+0x4f/0x70 sound/core/seq_device.c:192 device_release+0x13f/0x210 drivers/base/core.c:814 kobject_cleanup lib/kobject.c:648 [inline] kobject_release lib/kobject.c:677 [inline] kref_put include/linux/kref.h:70 [inline] kobject_put+0x145/0x240 lib/kobject.c:694 put_device+0x25/0x30 drivers/base/core.c:1799 klist_devices_put+0x36/0x40 drivers/base/bus.c:827 klist_next+0x264/0x4a0 lib/klist.c:403 next_device drivers/base/bus.c:270 [inline] bus_for_each_dev+0x17e/0x210 drivers/base/bus.c:312 autoload_drivers+0x3b/0x50 sound/core/seq_device.c:117 process_one_work+0x9fb/0x1570 kernel/workqueue.c:2097 worker_thread+0x1e4/0x1350 kernel/workqueue.c:2231 kthread+0x324/0x3f0 kernel/kthread.c:231 ret_from_fork+0x25/0x30 arch/x86/entry/entry_64.S:425 The fix is simply to assure canceling the autoload work at removing the device. Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 36eb8ff upstream. Crash dump shows following instructions crash> bt PID: 0 TASK: ffffffffbe412480 CPU: 0 COMMAND: "swapper/0" #0 [ffff891ee0003868] machine_kexec at ffffffffbd063ef1 #1 [ffff891ee00038c8] __crash_kexec at ffffffffbd12b6f2 #2 [ffff891ee0003998] crash_kexec at ffffffffbd12c84c #3 [ffff891ee00039b8] oops_end at ffffffffbd030f0a #4 [ffff891ee00039e0] no_context at ffffffffbd074643 #5 [ffff891ee0003a40] __bad_area_nosemaphore at ffffffffbd07496e #6 [ffff891ee0003a90] bad_area_nosemaphore at ffffffffbd074a64 #7 [ffff891ee0003aa0] __do_page_fault at ffffffffbd074b0a #8 [ffff891ee0003b18] do_page_fault at ffffffffbd074fc8 #9 [ffff891ee0003b50] page_fault at ffffffffbda01925 [exception RIP: qlt_schedule_sess_for_deletion+15] RIP: ffffffffc02e526f RSP: ffff891ee0003c08 RFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffc0307847 RDX: 00000000000020e6 RSI: ffff891edbc377c8 RDI: 0000000000000000 RBP: ffff891ee0003c18 R8: ffffffffc02f0b20 R9: 0000000000000250 R10: 0000000000000258 R11: 000000000000b780 R12: ffff891ed9b43000 R13: 00000000000000f0 R14: 0000000000000006 R15: ffff891edbc377c8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff891ee0003c20] qla2x00_fcport_event_handler at ffffffffc02853d3 [qla2xxx] #11 [ffff891ee0003cf0] __dta_qla24xx_async_gnl_sp_done_333 at ffffffffc0285a1d [qla2xxx] #12 [ffff891ee0003de8] qla24xx_process_response_queue at ffffffffc02a2eb5 [qla2xxx] #13 [ffff891ee0003e88] qla24xx_msix_rsp_q at ffffffffc02a5403 [qla2xxx] #14 [ffff891ee0003ec0] __handle_irq_event_percpu at ffffffffbd0f4c59 #15 [ffff891ee0003f10] handle_irq_event_percpu at ffffffffbd0f4e02 #16 [ffff891ee0003f40] handle_irq_event at ffffffffbd0f4e90 #17 [ffff891ee0003f68] handle_edge_irq at ffffffffbd0f8984 #18 [ffff891ee0003f88] handle_irq at ffffffffbd0305d5 #19 [ffff891ee0003fb8] do_IRQ at ffffffffbda02a18 --- <IRQ stack> --- #20 [ffffffffbe403d30] ret_from_intr at ffffffffbda0094e [exception RIP: unknown or invalid address] RIP: 000000000000001f RSP: 0000000000000000 RFLAGS: fff3b8c2091ebb3f RAX: ffffbba5a0000200 RBX: 0000be8cdfa8f9fa RCX: 0000000000000018 RDX: 0000000000000101 RSI: 000000000000015d RDI: 0000000000000193 RBP: 0000000000000083 R8: ffffffffbe403e38 R9: 0000000000000002 R10: 0000000000000000 R11: ffffffffbe56b820 R12: ffff891ee001cf00 R13: ffffffffbd11c0a4 R14: ffffffffbe403d60 R15: 0000000000000001 ORIG_RAX: ffff891ee0022ac0 CS: 0000 SS: ffffffffffffffb9 bt: WARNING: possibly bogus exception frame #21 [ffffffffbe403dd8] cpuidle_enter_state at ffffffffbd67c6fd #22 [ffffffffbe403e40] cpuidle_enter at ffffffffbd67c907 #23 [ffffffffbe403e50] call_cpuidle at ffffffffbd0d98f3 #24 [ffffffffbe403e60] do_idle at ffffffffbd0d9b42 #25 [ffffffffbe403e98] cpu_startup_entry at ffffffffbd0d9da3 #26 [ffffffffbe403ec0] rest_init at ffffffffbd81d4aa #27 [ffffffffbe403ed0] start_kernel at ffffffffbe67d2ca #28 [ffffffffbe403f28] x86_64_start_reservations at ffffffffbe67c675 #29 [ffffffffbe403f38] x86_64_start_kernel at ffffffffbe67c6eb #30 [ffffffffbe403f50] secondary_startup_64 at ffffffffbd0000d5 Fixes: 040036b ("scsi: qla2xxx: Delay loop id allocation at login") Cc: <stable@vger.kernel.org> # v4.17+ Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d3f07c0 upstream. syzbot found the following crash on: HEAD commit: d9bd94c Add linux-next specific files for 20180801 git tree: linux-next console output: https://syzkaller.appspot.com/x/log.txt?x=1001189c400000 kernel config: https://syzkaller.appspot.com/x/.config?x=cc8964ea4d04518c dashboard link: https://syzkaller.appspot.com/bug?extid=c966a82db0b14aa37e81 compiler: gcc (GCC) 8.0.1 20180413 (experimental) Unfortunately, I don't have any reproducer for this crash yet. IMPORTANT: if you fix the bug, please add the following tag to the commit: Reported-by: syzbot+c966a82db0b14aa37e81@syzkaller.appspotmail.com loop7: rw=12288, want=8200, limit=20 netlink: 65342 bytes leftover after parsing attributes in process `syz-executor4'. openvswitch: netlink: Message has 8 unknown bytes. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN CPU: 1 PID: 7615 Comm: syz-executor7 Not tainted 4.18.0-rc7-next-20180801+ #29 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__read_once_size include/linux/compiler.h:188 [inline] RIP: 0010:compound_head include/linux/page-flags.h:142 [inline] RIP: 0010:PageLocked include/linux/page-flags.h:272 [inline] RIP: 0010:f2fs_put_page fs/f2fs/f2fs.h:2011 [inline] RIP: 0010:validate_checkpoint+0x66d/0xec0 fs/f2fs/checkpoint.c:835 Code: e8 58 05 7f fe 4c 8d 6b 80 4d 8d 74 24 08 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 c6 04 02 00 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 f4 06 00 00 4c 89 ea 4d 8b 7c 24 08 48 b8 00 00 RSP: 0018:ffff8801937cebe8 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff8801937cef30 RCX: ffffc90006035000 RDX: 0000000000000000 RSI: ffffffff82fd9658 RDI: 0000000000000005 RBP: ffff8801937cef58 R08: ffff8801ab254700 R09: fffff94000d9e026 R10: fffff94000d9e026 R11: ffffea0006cf0137 R12: fffffffffffffffb R13: ffff8801937ceeb0 R14: 0000000000000003 R15: ffff880193419b40 FS: 00007f36a61d5700(0000) GS:ffff8801db100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc04ff93000 CR3: 00000001d0562000 CR4: 00000000001426e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: f2fs_get_valid_checkpoint+0x436/0x1ec0 fs/f2fs/checkpoint.c:860 f2fs_fill_super+0x2d42/0x8110 fs/f2fs/super.c:2883 mount_bdev+0x314/0x3e0 fs/super.c:1344 f2fs_mount+0x3c/0x50 fs/f2fs/super.c:3133 legacy_get_tree+0x131/0x460 fs/fs_context.c:729 vfs_get_tree+0x1cb/0x5c0 fs/super.c:1743 do_new_mount fs/namespace.c:2603 [inline] do_mount+0x6f2/0x1e20 fs/namespace.c:2927 ksys_mount+0x12d/0x140 fs/namespace.c:3143 __do_sys_mount fs/namespace.c:3157 [inline] __se_sys_mount fs/namespace.c:3154 [inline] __x64_sys_mount+0xbe/0x150 fs/namespace.c:3154 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x45943a Code: b8 a6 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 bd 8a fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 9a 8a fb ff c3 66 0f 1f 84 00 00 00 00 00 RSP: 002b:00007f36a61d4a88 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 00007f36a61d4b30 RCX: 000000000045943a RDX: 00007f36a61d4ad0 RSI: 0000000020000100 RDI: 00007f36a61d4af0 RBP: 0000000020000100 R08: 00007f36a61d4b30 R09: 00007f36a61d4ad0 R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000013 R13: 0000000000000000 R14: 00000000004c8ea0 R15: 0000000000000000 Modules linked in: Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace bd8550c129352286 ]--- RIP: 0010:__read_once_size include/linux/compiler.h:188 [inline] RIP: 0010:compound_head include/linux/page-flags.h:142 [inline] RIP: 0010:PageLocked include/linux/page-flags.h:272 [inline] RIP: 0010:f2fs_put_page fs/f2fs/f2fs.h:2011 [inline] RIP: 0010:validate_checkpoint+0x66d/0xec0 fs/f2fs/checkpoint.c:835 Code: e8 58 05 7f fe 4c 8d 6b 80 4d 8d 74 24 08 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 c6 04 02 00 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 f4 06 00 00 4c 89 ea 4d 8b 7c 24 08 48 b8 00 00 RSP: 0018:ffff8801937cebe8 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff8801937cef30 RCX: ffffc90006035000 RDX: 0000000000000000 RSI: ffffffff82fd9658 RDI: 0000000000000005 netlink: 65342 bytes leftover after parsing attributes in process `syz-executor4'. RBP: ffff8801937cef58 R08: ffff8801ab254700 R09: fffff94000d9e026 openvswitch: netlink: Message has 8 unknown bytes. R10: fffff94000d9e026 R11: ffffea0006cf0137 R12: fffffffffffffffb R13: ffff8801937ceeb0 R14: 0000000000000003 R15: ffff880193419b40 FS: 00007f36a61d5700(0000) GS:ffff8801db100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc04ff93000 CR3: 00000001d0562000 CR4: 00000000001426e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 In validate_checkpoint(), if we failed to call get_checkpoint_version(), we will pass returned invalid page pointer into f2fs_put_page, cause accessing invalid memory, this patch tries to handle error path correctly to fix this issue. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

[ Upstream commit 0d9c9a2 ] These functions are called from atomic context: [ 9.150239] BUG: sleeping function called from invalid context at /home/scott/git/linux/mm/slab.h:421 [ 9.158159] in_atomic(): 1, irqs_disabled(): 0, pid: 4432, name: ip [ 9.163128] CPU: 8 PID: 4432 Comm: ip Not tainted 4.20.0-rc2-00169-g63d86876f324 #29 [ 9.163130] Call Trace: [ 9.170701] [c0000002e899a980] [c0000000009c1068] .dump_stack+0xa8/0xec (unreliable) [ 9.177140] [c0000002e899aa10] [c00000000007a7b4] .___might_sleep+0x138/0x164 [ 9.184440] [c0000002e899aa80] [c0000000001d5bac] .kmem_cache_alloc_trace+0x238/0x30c [ 9.191216] [c0000002e899ab40] [c00000000065ea1c] .memac_add_hash_mac_address+0x104/0x198 [ 9.199464] [c0000002e899abd0] [c00000000065a788] .set_multi+0x1c8/0x218 [ 9.206242] [c0000002e899ac80] [c0000000006615ec] .dpaa_set_rx_mode+0xdc/0x17c [ 9.213544] [c0000002e899ad00] [c00000000083d2b0] .__dev_set_rx_mode+0x80/0xd4 [ 9.219535] [c0000002e899ad90] [c00000000083d334] .dev_set_rx_mode+0x30/0x54 [ 9.225271] [c0000002e899ae10] [c00000000083d4a0] .__dev_open+0x148/0x1c8 [ 9.230751] [c0000002e899aeb0] [c00000000083d934] .__dev_change_flags+0x19c/0x1e0 [ 9.230755] [c0000002e899af60] [c00000000083d9a4] .dev_change_flags+0x2c/0x80 [ 9.242752] [c0000002e899aff0] [c0000000008554ec] .do_setlink+0x350/0xf08 [ 9.248228] [c0000002e899b170] [c000000000857ad0] .rtnl_newlink+0x588/0x7e0 [ 9.253965] [c0000002e899b740] [c000000000852424] .rtnetlink_rcv_msg+0x3e0/0x498 [ 9.261440] [c0000002e899b820] [c000000000884790] .netlink_rcv_skb+0x134/0x14c [ 9.267607] [c0000002e899b8e0] [c000000000851840] .rtnetlink_rcv+0x18/0x2c [ 9.274558] [c0000002e899b950] [c000000000883c8c] .netlink_unicast+0x214/0x318 [ 9.281163] [c0000002e899ba00] [c000000000884220] .netlink_sendmsg+0x348/0x444 [ 9.287076] [c0000002e899bae0] [c00000000080d13c] .sock_sendmsg+0x2c/0x54 [ 9.287080] [c0000002e899bb50] [c0000000008106c0] .___sys_sendmsg+0x2d0/0x2d8 [ 9.298375] [c0000002e899bd30] [c000000000811a80] .__sys_sendmsg+0x5c/0xb0 [ 9.303939] [c0000002e899be20] [c0000000000006b0] system_call+0x60/0x6c Signed-off-by: Scott Wood <oss@buserror.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c4317b1 ] In case devlink reload failed, it is possible to trigger a use-after-free when querying the kernel for device info via 'devlink dev info' [1]. This happens because as part of the reload error path the PCI command interface is de-initialized and its mailboxes are freed. When the devlink '->info_get()' callback is invoked the device is queried via the command interface and the freed mailboxes are accessed. Fix this by initializing the command interface once during probe and not during every reload. This is consistent with the other bus used by mlxsw (i.e., 'mlxsw_i2c') and also allows user space to query the running firmware version (for example) from the device after a failed reload. [1] BUG: KASAN: use-after-free in memcpy include/linux/string.h:406 [inline] BUG: KASAN: use-after-free in mlxsw_pci_cmd_exec+0x177/0xa60 drivers/net/ethernet/mellanox/mlxsw/pci.c:1675 Write of size 4096 at addr ffff88810ae32000 by task syz-executor.1/2355 CPU: 1 PID: 2355 Comm: syz-executor.1 Not tainted 5.8.0-rc2+ #29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xf6/0x16e lib/dump_stack.c:118 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 check_memory_region_inline mm/kasan/generic.c:186 [inline] check_memory_region+0x14e/0x1b0 mm/kasan/generic.c:192 memcpy+0x39/0x60 mm/kasan/common.c:106 memcpy include/linux/string.h:406 [inline] mlxsw_pci_cmd_exec+0x177/0xa60 drivers/net/ethernet/mellanox/mlxsw/pci.c:1675 mlxsw_cmd_exec+0x249/0x550 drivers/net/ethernet/mellanox/mlxsw/core.c:2335 mlxsw_cmd_access_reg drivers/net/ethernet/mellanox/mlxsw/cmd.h:859 [inline] mlxsw_core_reg_access_cmd drivers/net/ethernet/mellanox/mlxsw/core.c:1938 [inline] mlxsw_core_reg_access+0x2f6/0x540 drivers/net/ethernet/mellanox/mlxsw/core.c:1985 mlxsw_reg_query drivers/net/ethernet/mellanox/mlxsw/core.c:2000 [inline] mlxsw_devlink_info_get+0x17f/0x6e0 drivers/net/ethernet/mellanox/mlxsw/core.c:1090 devlink_nl_info_fill.constprop.0+0x13c/0x2d0 net/core/devlink.c:4588 devlink_nl_cmd_info_get_dumpit+0x246/0x460 net/core/devlink.c:4648 genl_lock_dumpit+0x85/0xc0 net/netlink/genetlink.c:575 netlink_dump+0x515/0xe50 net/netlink/af_netlink.c:2245 __netlink_dump_start+0x53d/0x830 net/netlink/af_netlink.c:2353 genl_family_rcv_msg_dumpit.isra.0+0x296/0x300 net/netlink/genetlink.c:638 genl_family_rcv_msg net/netlink/genetlink.c:733 [inline] genl_rcv_msg+0x78d/0x9d0 net/netlink/genetlink.c:753 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2469 genl_rcv+0x24/0x40 net/netlink/genetlink.c:764 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0x150/0x190 net/socket.c:672 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2363 ___sys_sendmsg+0xff/0x170 net/socket.c:2417 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2450 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: a9c8336 ("mlxsw: core: Add support for devlink info command") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b514191 ] The commit cited below removed the RCU read-side critical section from rtnl_fdb_dump() which means that the ndo_fdb_dump() callback is invoked without RCU protection. This results in the following warning [1] in the VXLAN driver, which relied on the callback being invoked from an RCU read-side critical section. Fix this by calling rcu_read_lock() in the VXLAN driver, as already done in the bridge driver. [1] WARNING: suspicious RCU usage 5.8.0-rc4-custom-01521-g481007553ce6 #29 Not tainted ----------------------------- drivers/net/vxlan.c:1379 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by bridge/166: #0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xea/0x1090 stack backtrace: CPU: 1 PID: 166 Comm: bridge Not tainted 5.8.0-rc4-custom-01521-g481007553ce6 #29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x100/0x184 lockdep_rcu_suspicious+0x153/0x15d vxlan_fdb_dump+0x51e/0x6d0 rtnl_fdb_dump+0x4dc/0xad0 netlink_dump+0x540/0x1090 __netlink_dump_start+0x695/0x950 rtnetlink_rcv_msg+0x802/0xbd0 netlink_rcv_skb+0x17a/0x480 rtnetlink_rcv+0x22/0x30 netlink_unicast+0x5ae/0x890 netlink_sendmsg+0x98a/0xf40 __sys_sendto+0x279/0x3b0 __x64_sys_sendto+0xe6/0x1a0 do_syscall_64+0x54/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fe14fa2ade0 Code: Bad RIP value. RSP: 002b:00007fff75bb5b88 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00005614b1ba0020 RCX: 00007fe14fa2ade0 RDX: 000000000000011c RSI: 00007fff75bb5b90 RDI: 0000000000000003 RBP: 00007fff75bb5b90 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00005614b1b89160 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Fixes: 5e6d243 ("bridge: netlink dump interface at par with brctl") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit b9ceca6 ] When more than a single SCMI device are present in the system, the creation of the notification workqueue with the WQ_SYSFS flag will lead to the following sysfs duplicate node warning: sysfs: cannot create duplicate filename '/devices/virtual/workqueue/scmi_notify' CPU: 0 PID: 20 Comm: kworker/0:1 Not tainted 5.9.0-gdf4dd84a3f7d openbmc#29 Hardware name: Broadcom STB (Flattened Device Tree) Workqueue: events deferred_probe_work_func Backtrace: show_stack + 0x20/0x24 dump_stack + 0xbc/0xe0 sysfs_warn_dup + 0x70/0x80 sysfs_create_dir_ns + 0x15c/0x1a4 kobject_add_internal + 0x140/0x4d0 kobject_add + 0xc8/0x138 device_add + 0x1dc/0xc20 device_register + 0x24/0x28 workqueue_sysfs_register + 0xe4/0x1f0 alloc_workqueue + 0x448/0x6ac scmi_notification_init + 0x78/0x1dc scmi_probe + 0x268/0x4fc platform_drv_probe + 0x70/0xc8 really_probe + 0x184/0x728 driver_probe_device + 0xa4/0x278 __device_attach_driver + 0xe8/0x148 bus_for_each_drv + 0x108/0x158 __device_attach + 0x190/0x234 device_initial_probe + 0x1c/0x20 bus_probe_device + 0xdc/0xec deferred_probe_work_func + 0xd4/0x11c process_one_work + 0x420/0x8f0 worker_thread + 0x4fc/0x91c kthread + 0x21c/0x22c ret_from_fork + 0x14/0x20 kobject_add_internal failed for scmi_notify with -EEXIST, don't try to register things with the same name in the same directory. arm-scmi brcm_scmi@1: SCMI Notifications - Initialization Failed. arm-scmi brcm_scmi@1: SCMI Notifications NOT available. arm-scmi brcm_scmi@1: SCMI Protocol v1.0 'brcm-scmi:' Firmware version 0x1 Fix this by using dev_name(handle->dev) which guarantees that the name is unique and this also helps correlate which notification workqueue corresponds to which SCMI device instance. Link: https://lore.kernel.org/r/20201014021737.287340-1-f.fainelli@gmail.com Fixes: bd31b24 ("firmware: arm_scmi: Add notification dispatch and delivery") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> [sudeep.holla: trimmed backtrace to remove all unwanted hexcodes and timestamps] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d412137 ] The perf_buffer fails on system with offline cpus: # test_progs -t perf_buffer test_perf_buffer:PASS:nr_cpus 0 nsec test_perf_buffer:PASS:nr_on_cpus 0 nsec test_perf_buffer:PASS:skel_load 0 nsec test_perf_buffer:PASS:attach_kprobe 0 nsec test_perf_buffer:PASS:perf_buf__new 0 nsec test_perf_buffer:PASS:epoll_fd 0 nsec skipping offline CPU #24 skipping offline CPU #25 skipping offline CPU #26 skipping offline CPU #27 skipping offline CPU #28 skipping offline CPU #29 skipping offline CPU #30 skipping offline CPU #31 test_perf_buffer:PASS:perf_buffer__poll 0 nsec test_perf_buffer:PASS:seen_cpu_cnt 0 nsec test_perf_buffer:FAIL:buf_cnt got 24, expected 32 Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED Changing the test to check online cpus instead of possible. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20211021114132.8196-2-jolsa@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 22e2100 upstream. The trace_hardirqs_{on,off}() require the caller to setup frame pointer properly. This because these two functions use macro 'CALLER_ADDR1' (aka. __builtin_return_address(1)) to acquire caller info. If the $fp is used for other purpose, the code generated this macro (as below) could trigger memory access fault. 0xffffffff8011510e <+80>: ld a1,-16(s0) 0xffffffff80115112 <+84>: ld s2,-8(a1) # <-- paging fault here The oops message during booting if compiled with 'irqoff' tracer enabled: [ 0.039615][ T0] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000f8 [ 0.041925][ T0] Oops [#1] [ 0.042063][ T0] Modules linked in: [ 0.042864][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.17.0-rc1-00233-g9a20c48d1ed2 #29 [ 0.043568][ T0] Hardware name: riscv-virtio,qemu (DT) [ 0.044343][ T0] epc : trace_hardirqs_on+0x56/0xe2 [ 0.044601][ T0] ra : restore_all+0x12/0x6e [ 0.044721][ T0] epc : ffffffff80126a5c ra : ffffffff80003b94 sp : ffffffff81403db0 [ 0.044801][ T0] gp : ffffffff8163acd8 tp : ffffffff81414880 t0 : 0000000000000020 [ 0.044882][ T0] t1 : 0098968000000000 t2 : 0000000000000000 s0 : ffffffff81403de0 [ 0.044967][ T0] s1 : 0000000000000000 a0 : 0000000000000001 a1 : 0000000000000100 [ 0.045046][ T0] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.045124][ T0] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000054494d45 [ 0.045210][ T0] s2 : ffffffff80003b94 s3 : ffffffff81a8f1b0 s4 : ffffffff80e27b50 [ 0.045289][ T0] s5 : ffffffff81414880 s6 : ffffffff8160fa00 s7 : 00000000800120e8 [ 0.045389][ T0] s8 : 0000000080013100 s9 : 000000000000007f s10: 0000000000000000 [ 0.045474][ T0] s11: 0000000000000000 t3 : 7fffffffffffffff t4 : 0000000000000000 [ 0.045548][ T0] t5 : 0000000000000000 t6 : ffffffff814aa368 [ 0.045620][ T0] status: 0000000200000100 badaddr: 00000000000000f8 cause: 000000000000000d [ 0.046402][ T0] [<ffffffff80003b94>] restore_all+0x12/0x6e This because the $fp(aka. $s0) register is not used as frame pointer in the assembly entry code. resume_kernel: REG_L s0, TASK_TI_PREEMPT_COUNT(tp) bnez s0, restore_all REG_L s0, TASK_TI_FLAGS(tp) andi s0, s0, _TIF_NEED_RESCHED beqz s0, restore_all call preempt_schedule_irq j restore_all To fix above issue, here we add one extra level wrapper for function trace_hardirqs_{on,off}() so they can be safely called by low level entry code. Signed-off-by: Changbin Du <changbin.du@gmail.com> Fixes: 3c46979 ("riscv: Enable LOCKDEP_SUPPORT & fixup TRACE_IRQFLAGS_SUPPORT") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 71e2d66 upstream. The following has been observed when running stressng mmap since commit b653db7 ("mm: Clear page->private when splitting or migrating a page") watchdog: BUG: soft lockup - CPU#75 stuck for 26s! [stress-ng:9546] CPU: 75 PID: 9546 Comm: stress-ng Tainted: G E 6.0.0-revert-b653db77-fix+ #29 0357d79b60fb09775f678e4f3f64ef0579ad1374 Hardware name: SGI.COM C2112-4GP3/X10DRT-P-Series, BIOS 2.0a 05/09/2016 RIP: 0010:xas_descend+0x28/0x80 Code: cc cc 0f b6 0e 48 8b 57 08 48 d3 ea 83 e2 3f 89 d0 48 83 c0 04 48 8b 44 c6 08 48 89 77 18 48 89 c1 83 e1 03 48 83 f9 02 75 08 <48> 3d fd 00 00 00 76 08 88 57 12 c3 cc cc cc cc 48 c1 e8 02 89 c2 RSP: 0018:ffffbbf02a2236a8 EFLAGS: 00000246 RAX: ffff9cab7d6a0002 RBX: ffffe04b0af88040 RCX: 0000000000000002 RDX: 0000000000000030 RSI: ffff9cab60509b60 RDI: ffffbbf02a2236c0 RBP: 0000000000000000 R08: ffff9cab60509b60 R09: ffffbbf02a2236c0 R10: 0000000000000001 R11: ffffbbf02a223698 R12: 0000000000000000 R13: ffff9cab4e28da80 R14: 0000000000039c01 R15: ffff9cab4e28da88 FS: 00007fab89b85e40(0000) GS:ffff9cea3fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fab84e00000 CR3: 00000040b73a4003 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> xas_load+0x3a/0x50 __filemap_get_folio+0x80/0x370 ? put_swap_page+0x163/0x360 pagecache_get_page+0x13/0x90 __try_to_reclaim_swap+0x50/0x190 scan_swap_map_slots+0x31e/0x670 get_swap_pages+0x226/0x3c0 folio_alloc_swap+0x1cc/0x240 add_to_swap+0x14/0x70 shrink_page_list+0x968/0xbc0 reclaim_page_list+0x70/0xf0 reclaim_pages+0xdd/0x120 madvise_cold_or_pageout_pte_range+0x814/0xf30 walk_pgd_range+0x637/0xa30 __walk_page_range+0x142/0x170 walk_page_range+0x146/0x170 madvise_pageout+0xb7/0x280 ? asm_common_interrupt+0x22/0x40 madvise_vma_behavior+0x3b7/0xac0 ? find_vma+0x4a/0x70 ? find_vma+0x64/0x70 ? madvise_vma_anon_name+0x40/0x40 madvise_walk_vmas+0xa6/0x130 do_madvise+0x2f4/0x360 __x64_sys_madvise+0x26/0x30 do_syscall_64+0x5b/0x80 ? do_syscall_64+0x67/0x80 ? syscall_exit_to_user_mode+0x17/0x40 ? do_syscall_64+0x67/0x80 ? syscall_exit_to_user_mode+0x17/0x40 ? do_syscall_64+0x67/0x80 ? do_syscall_64+0x67/0x80 ? common_interrupt+0x8b/0xa0 entry_SYSCALL_64_after_hwframe+0x63/0xcd The problem can be reproduced with the mmtests config config-workload-stressng-mmap. It does not always happen and when it triggers is variable but it has happened on multiple machines. The intent of commit b653db7 patch was to avoid the case where PG_private is clear but folio->private is not-NULL. However, THP tail pages uses page->private for "swp_entry_t if folio_test_swapcache()" as stated in the documentation for struct folio. This patch only clobbers page->private for tail pages if the head page was not in swapcache and warns once if page->private had an unexpected value. Link: https://lkml.kernel.org/r/20221019134156.zjyyn5aownakvztf@techsingularity.net Fixes: b653db7 ("mm: Clear page->private when splitting or migrating a page") Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Yang Shi <shy828301@gmail.com> Cc: Brian Foster <bfoster@redhat.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Seth Jennings <sjenning@redhat.com> Cc: Vitaly Wool <vitaly.wool@konsulko.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As previously explained, the rehash delayed work migrates filters from one region to another. This is done by iterating over all chunks (all the filters with the same priority) in the region and in each chunk iterating over all the filters. When the work runs out of credits it stores the current chunk and entry as markers in the per-work context so that it would know where to resume the migration from the next time the work is scheduled. Upon error, the chunk marker is reset to NULL, but without resetting the entry markers despite being relative to it. This can result in migration being resumed from an entry that does not belong to the chunk being migrated. In turn, this will eventually lead to a chunk being iterated over as if it is an entry. Because of how the two structures happen to be defined, this does not lead to KASAN splats, but to warnings such as [1]. Fix by creating a helper that resets all the markers and call it from all the places the currently only reset the chunk marker. For good measures also call it when starting a completely new rehash. Add a warning to avoid future cases. [1] WARNING: CPU: 7 PID: 1076 at drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_keys.c:407 mlxsw_afk_encode+0x242/0x2f0 Modules linked in: CPU: 7 PID: 1076 Comm: kworker/7:24 Tainted: G W 6.9.0-rc3-custom-00880-g29e61d91b77b openbmc#29 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_afk_encode+0x242/0x2f0 [...] Call Trace: <TASK> mlxsw_sp_acl_atcam_entry_add+0xd9/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x109/0x290 mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x470 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/cc17eed86b41dd829d39b07906fec074a9ce580e.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit 743edc8 ] As previously explained, the rehash delayed work migrates filters from one region to another. This is done by iterating over all chunks (all the filters with the same priority) in the region and in each chunk iterating over all the filters. When the work runs out of credits it stores the current chunk and entry as markers in the per-work context so that it would know where to resume the migration from the next time the work is scheduled. Upon error, the chunk marker is reset to NULL, but without resetting the entry markers despite being relative to it. This can result in migration being resumed from an entry that does not belong to the chunk being migrated. In turn, this will eventually lead to a chunk being iterated over as if it is an entry. Because of how the two structures happen to be defined, this does not lead to KASAN splats, but to warnings such as [1]. Fix by creating a helper that resets all the markers and call it from all the places the currently only reset the chunk marker. For good measures also call it when starting a completely new rehash. Add a warning to avoid future cases. [1] WARNING: CPU: 7 PID: 1076 at drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_keys.c:407 mlxsw_afk_encode+0x242/0x2f0 Modules linked in: CPU: 7 PID: 1076 Comm: kworker/7:24 Tainted: G W 6.9.0-rc3-custom-00880-g29e61d91b77b #29 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_afk_encode+0x242/0x2f0 [...] Call Trace: <TASK> mlxsw_sp_acl_atcam_entry_add+0xd9/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x109/0x290 mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x470 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/cc17eed86b41dd829d39b07906fec074a9ce580e.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e64746e ] cpumask_of_node() can be called for NUMA_NO_NODE inside do_map_benchmark() resulting in the following sanitizer report: UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask [64][1]' CPU: 1 PID: 990 Comm: dma_map_benchma Not tainted 6.9.0-rc6 #29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117) ubsan_epilogue (lib/ubsan.c:232) __ubsan_handle_out_of_bounds (lib/ubsan.c:429) cpumask_of_node (arch/x86/include/asm/topology.h:72) [inline] do_map_benchmark (kernel/dma/map_benchmark.c:104) map_benchmark_ioctl (kernel/dma/map_benchmark.c:246) full_proxy_unlocked_ioctl (fs/debugfs/file.c:333) __x64_sys_ioctl (fs/ioctl.c:890) do_syscall_64 (arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Use cpumask_of_node() in place when binding a kernel thread to a cpuset of a particular node. Note that the provided node id is checked inside map_benchmark_ioctl(). It's just a NUMA_NO_NODE case which is not handled properly later. Found by Linux Verification Center (linuxtesting.org). Fixes: 65789da ("dma-mapping: add benchmark support for streaming DMA APIs") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Acked-by: Barry Song <baohua@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit eef0532 ] Run bpf_tcp_ca selftests (./test_progs -t bpf_tcp_ca) on a Loongarch platform, some "Segmentation fault" errors occur: ''' test_dctcp:PASS:bpf_dctcp__open_and_load 0 nsec test_dctcp:FAIL:bpf_map__attach_struct_ops unexpected error: -524 #29/1 bpf_tcp_ca/dctcp:FAIL test_cubic:PASS:bpf_cubic__open_and_load 0 nsec test_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524 #29/2 bpf_tcp_ca/cubic:FAIL test_dctcp_fallback:PASS:dctcp_skel 0 nsec test_dctcp_fallback:PASS:bpf_dctcp__load 0 nsec test_dctcp_fallback:FAIL:dctcp link unexpected error: -524 #29/4 bpf_tcp_ca/dctcp_fallback:FAIL test_write_sk_pacing:PASS:open_and_load 0 nsec test_write_sk_pacing:FAIL:attach_struct_ops unexpected error: -524 #29/6 bpf_tcp_ca/write_sk_pacing:FAIL test_update_ca:PASS:open 0 nsec test_update_ca:FAIL:attach_struct_ops unexpected error: -524 settcpca:FAIL:setsockopt unexpected setsockopt: \ actual -1 == expected -1 (network_helpers.c:99: errno: No such file or directory) \ Failed to call post_socket_cb start_test:FAIL:start_server_str unexpected start_server_str: \ actual -1 == expected -1 test_update_ca:FAIL:ca1_ca1_cnt unexpected ca1_ca1_cnt: \ actual 0 <= expected 0 #29/9 bpf_tcp_ca/update_ca:FAIL #29 bpf_tcp_ca:FAIL Caught signal #11! Stack trace: ./test_progs(crash_handler+0x28)[0x5555567ed91c] linux-vdso.so.1(__vdso_rt_sigreturn+0x0)[0x7ffffee408b0] ./test_progs(bpf_link__update_map+0x80)[0x555556824a78] ./test_progs(+0x94d68)[0x5555564c4d68] ./test_progs(test_bpf_tcp_ca+0xe8)[0x5555564c6a88] ./test_progs(+0x3bde54)[0x5555567ede54] ./test_progs(main+0x61c)[0x5555567efd54] /usr/lib64/libc.so.6(+0x22208)[0x7ffff2aaa208] /usr/lib64/libc.so.6(__libc_start_main+0xac)[0x7ffff2aaa30c] ./test_progs(_start+0x48)[0x55555646bca8] Segmentation fault ''' This is because BPF trampoline is not implemented on Loongarch yet, "link" returned by bpf_map__attach_struct_ops() is NULL. test_progs crashs when this NULL link passes to bpf_link__update_map(). This patch adds NULL checks for all links in bpf_tcp_ca to fix these errors. If "link" is NULL, goto the newly added label "out" to destroy the skel. v2: - use "goto out" instead of "return" as Eduard suggested. Fixes: 06da9f3 ("selftests/bpf: Test switching TCP Congestion Control algorithms.") Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Alan Maguire <alan.maguire@oracle.com> Link: https://lore.kernel.org/r/b4c841492bd4ed97964e4e61e92827ce51bf1dc9.1720615848.git.tanggeliang@kylinos.cn Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

aspeed: correct sram address in ast2400.dtsi

c14be2f

The sram reg and name properties were missing a zero. It was more obvious when looking at the platform device names which put the address before the generic name. Signed-off-by: Milton Miller <miltonm@us.ibm.com>

shenki closed this Dec 10, 2015

nkskjames mentioned this pull request Mar 4, 2016

JFFS2 corruption that results in kernel panic #59

Closed

mdmillerii deleted the ast2400-sram branch March 10, 2016 16:57

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

aspeed: correct sram address in ast2400.dtsi #29

aspeed: correct sram address in ast2400.dtsi #29

mdmillerii commented Dec 10, 2015

shenki commented Dec 10, 2015

aspeed: correct sram address in ast2400.dtsi #29

aspeed: correct sram address in ast2400.dtsi #29

Conversation

mdmillerii commented Dec 10, 2015

shenki commented Dec 10, 2015