gpio/aspeed: Use handler_data in aspeed_gpio_irq_handler. #24

jk-ozlabs · 2015-12-01T06:19:59Z

In the port to 4.3, we converted to the newer irq api, but used the
chip_data for the struct aspeed_gpio pointer, rather than the
handler_data.

We use irq_set_chaned_handler_and_data to establish this pointer, which
sets handler_data. This change uses the appropriate pointer in our
handler instead.

Signed-off-by: Jeremy Kerr jk@ozlabs.org

In the port to 4.3, we converted to the newer irq api, but used the chip_data for the struct aspeed_gpio pointer, rather than the handler_data. We use irq_set_chaned_handler_and_data to establish this pointer, which sets handler_data. This change uses the appropriate pointer in our handler instead. Signed-off-by: Jeremy Kerr <jk@ozlabs.org>

shenki · 2015-12-01T06:26:20Z

Thanks, pulled into the tree at 6041e18.

I will tag a new release so we can get it pulled into the distro.

[ Upstream commit 7f109f7 ] When vrf's ->newlink is called, if register_netdevice() fails then it does free_netdev(), but that's also done by rtnl_newlink() so a second free happens and memory gets corrupted, to reproduce execute the following line a couple of times (1 - 5 usually is enough): $ for i in `seq 1 5`; do ip link add vrf: type vrf table 1; done; This works because we fail in register_netdevice() because of the wrong name "vrf:". And here's a trace of one crash: [ 28.792157] ------------[ cut here ]------------ [ 28.792407] kernel BUG at fs/namei.c:246! [ 28.792608] invalid opcode: 0000 [#1] SMP [ 28.793240] Modules linked in: vrf nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace sunrpc crct10dif_pclmul crc32_pclmul crc32c_intel qxl drm_kms_helper ttm drm aesni_intel aes_x86_64 psmouse glue_helper lrw evdev gf128mul i2c_piix4 ablk_helper cryptd ppdev parport_pc parport serio_raw pcspkr virtio_balloon virtio_console i2c_core acpi_cpufreq button 9pnet_virtio 9p 9pnet fscache ipv6 autofs4 ext4 crc16 mbcache jbd2 virtio_blk virtio_net sg sr_mod cdrom ata_generic ehci_pci uhci_hcd ehci_hcd e1000 usbcore usb_common ata_piix libata virtio_pci virtio_ring virtio scsi_mod floppy [ 28.796016] CPU: 0 PID: 1148 Comm: ld-linux-x86-64 Not tainted 4.4.0-rc1+ #24 [ 28.796016] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014 [ 28.796016] task: ffff8800352561c0 ti: ffff88003592c000 task.ti: ffff88003592c000 [ 28.796016] RIP: 0010:[<ffffffff812187b3>] [<ffffffff812187b3>] putname+0x43/0x60 [ 28.796016] RSP: 0018:ffff88003592fe88 EFLAGS: 00010246 [ 28.796016] RAX: 0000000000000000 RBX: ffff8800352561c0 RCX: 0000000000000001 [ 28.796016] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88003784f000 [ 28.796016] RBP: ffff88003592ff08 R08: 0000000000000001 R09: 0000000000000000 [ 28.796016] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 [ 28.796016] R13: 000000000000047c R14: ffff88003784f000 R15: ffff8800358c4a00 [ 28.796016] FS: 0000000000000000(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 [ 28.796016] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 28.796016] CR2: 00007ffd583bc2d9 CR3: 0000000035a99000 CR4: 00000000000406f0 [ 28.796016] Stack: [ 28.796016] ffffffff8121045d ffffffff812102d3 ffff8800352561c0 ffff880035a91660 [ 28.796016] ffff8800008a9880 0000000000000000 ffffffff81a49940 00ffffff81218684 [ 28.796016] ffff8800352561c0 000000000000047c 0000000000000000 ffff880035b36d80 [ 28.796016] Call Trace: [ 28.796016] [<ffffffff8121045d>] ? do_execveat_common.isra.34+0x74d/0x930 [ 28.796016] [<ffffffff812102d3>] ? do_execveat_common.isra.34+0x5c3/0x930 [ 28.796016] [<ffffffff8121066c>] do_execve+0x2c/0x30 [ 28.796016] [<ffffffff810939a0>] call_usermodehelper_exec_async+0xf0/0x140 [ 28.796016] [<ffffffff810938b0>] ? umh_complete+0x40/0x40 [ 28.796016] [<ffffffff815cb1af>] ret_from_fork+0x3f/0x70 [ 28.796016] Code: 48 8d 47 1c 48 89 e5 53 48 8b 37 48 89 fb 48 39 c6 74 1a 48 8b 3d 7e e9 8f 00 e8 49 fa fc ff 48 89 df e8 f1 01 fd ff 5b 5d f3 c3 <0f> 0b 48 89 fe 48 8b 3d 61 e9 8f 00 e8 2c fa fc ff 5b 5d eb e9 [ 28.796016] RIP [<ffffffff812187b3>] putname+0x43/0x60 [ 28.796016] RSP <ffff88003592fe88> Fixes: 193125d ("net: Introduce VRF device driver") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 7f109f7 ] When vrf's ->newlink is called, if register_netdevice() fails then it does free_netdev(), but that's also done by rtnl_newlink() so a second free happens and memory gets corrupted, to reproduce execute the following line a couple of times (1 - 5 usually is enough): $ for i in `seq 1 5`; do ip link add vrf: type vrf table 1; done; This works because we fail in register_netdevice() because of the wrong name "vrf:". And here's a trace of one crash: [ 28.792157] ------------[ cut here ]------------ [ 28.792407] kernel BUG at fs/namei.c:246! [ 28.792608] invalid opcode: 0000 [openbmc#1] SMP [ 28.793240] Modules linked in: vrf nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace sunrpc crct10dif_pclmul crc32_pclmul crc32c_intel qxl drm_kms_helper ttm drm aesni_intel aes_x86_64 psmouse glue_helper lrw evdev gf128mul i2c_piix4 ablk_helper cryptd ppdev parport_pc parport serio_raw pcspkr virtio_balloon virtio_console i2c_core acpi_cpufreq button 9pnet_virtio 9p 9pnet fscache ipv6 autofs4 ext4 crc16 mbcache jbd2 virtio_blk virtio_net sg sr_mod cdrom ata_generic ehci_pci uhci_hcd ehci_hcd e1000 usbcore usb_common ata_piix libata virtio_pci virtio_ring virtio scsi_mod floppy [ 28.796016] CPU: 0 PID: 1148 Comm: ld-linux-x86-64 Not tainted 4.4.0-rc1+ openbmc#24 [ 28.796016] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014 [ 28.796016] task: ffff8800352561c0 ti: ffff88003592c000 task.ti: ffff88003592c000 [ 28.796016] RIP: 0010:[<ffffffff812187b3>] [<ffffffff812187b3>] putname+0x43/0x60 [ 28.796016] RSP: 0018:ffff88003592fe88 EFLAGS: 00010246 [ 28.796016] RAX: 0000000000000000 RBX: ffff8800352561c0 RCX: 0000000000000001 [ 28.796016] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88003784f000 [ 28.796016] RBP: ffff88003592ff08 R08: 0000000000000001 R09: 0000000000000000 [ 28.796016] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 [ 28.796016] R13: 000000000000047c R14: ffff88003784f000 R15: ffff8800358c4a00 [ 28.796016] FS: 0000000000000000(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 [ 28.796016] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 28.796016] CR2: 00007ffd583bc2d9 CR3: 0000000035a99000 CR4: 00000000000406f0 [ 28.796016] Stack: [ 28.796016] ffffffff8121045d ffffffff812102d3 ffff8800352561c0 ffff880035a91660 [ 28.796016] ffff8800008a9880 0000000000000000 ffffffff81a49940 00ffffff81218684 [ 28.796016] ffff8800352561c0 000000000000047c 0000000000000000 ffff880035b36d80 [ 28.796016] Call Trace: [ 28.796016] [<ffffffff8121045d>] ? do_execveat_common.isra.34+0x74d/0x930 [ 28.796016] [<ffffffff812102d3>] ? do_execveat_common.isra.34+0x5c3/0x930 [ 28.796016] [<ffffffff8121066c>] do_execve+0x2c/0x30 [ 28.796016] [<ffffffff810939a0>] call_usermodehelper_exec_async+0xf0/0x140 [ 28.796016] [<ffffffff810938b0>] ? umh_complete+0x40/0x40 [ 28.796016] [<ffffffff815cb1af>] ret_from_fork+0x3f/0x70 [ 28.796016] Code: 48 8d 47 1c 48 89 e5 53 48 8b 37 48 89 fb 48 39 c6 74 1a 48 8b 3d 7e e9 8f 00 e8 49 fa fc ff 48 89 df e8 f1 01 fd ff 5b 5d f3 c3 <0f> 0b 48 89 fe 48 8b 3d 61 e9 8f 00 e8 2c fa fc ff 5b 5d eb e9 [ 28.796016] RIP [<ffffffff812187b3>] putname+0x43/0x60 [ 28.796016] RSP <ffff88003592fe88> Fixes: 193125d ("net: Introduce VRF device driver") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7f109f7 upstream. When vrf's ->newlink is called, if register_netdevice() fails then it does free_netdev(), but that's also done by rtnl_newlink() so a second free happens and memory gets corrupted, to reproduce execute the following line a couple of times (1 - 5 usually is enough): $ for i in `seq 1 5`; do ip link add vrf: type vrf table 1; done; This works because we fail in register_netdevice() because of the wrong name "vrf:". And here's a trace of one crash: [ 28.792157] ------------[ cut here ]------------ [ 28.792407] kernel BUG at fs/namei.c:246! [ 28.792608] invalid opcode: 0000 [#1] SMP [ 28.793240] Modules linked in: vrf nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace sunrpc crct10dif_pclmul crc32_pclmul crc32c_intel qxl drm_kms_helper ttm drm aesni_intel aes_x86_64 psmouse glue_helper lrw evdev gf128mul i2c_piix4 ablk_helper cryptd ppdev parport_pc parport serio_raw pcspkr virtio_balloon virtio_console i2c_core acpi_cpufreq button 9pnet_virtio 9p 9pnet fscache ipv6 autofs4 ext4 crc16 mbcache jbd2 virtio_blk virtio_net sg sr_mod cdrom ata_generic ehci_pci uhci_hcd ehci_hcd e1000 usbcore usb_common ata_piix libata virtio_pci virtio_ring virtio scsi_mod floppy [ 28.796016] CPU: 0 PID: 1148 Comm: ld-linux-x86-64 Not tainted 4.4.0-rc1+ #24 [ 28.796016] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014 [ 28.796016] task: ffff8800352561c0 ti: ffff88003592c000 task.ti: ffff88003592c000 [ 28.796016] RIP: 0010:[<ffffffff812187b3>] [<ffffffff812187b3>] putname+0x43/0x60 [ 28.796016] RSP: 0018:ffff88003592fe88 EFLAGS: 00010246 [ 28.796016] RAX: 0000000000000000 RBX: ffff8800352561c0 RCX: 0000000000000001 [ 28.796016] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88003784f000 [ 28.796016] RBP: ffff88003592ff08 R08: 0000000000000001 R09: 0000000000000000 [ 28.796016] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 [ 28.796016] R13: 000000000000047c R14: ffff88003784f000 R15: ffff8800358c4a00 [ 28.796016] FS: 0000000000000000(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 [ 28.796016] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 28.796016] CR2: 00007ffd583bc2d9 CR3: 0000000035a99000 CR4: 00000000000406f0 [ 28.796016] Stack: [ 28.796016] ffffffff8121045d ffffffff812102d3 ffff8800352561c0 ffff880035a91660 [ 28.796016] ffff8800008a9880 0000000000000000 ffffffff81a49940 00ffffff81218684 [ 28.796016] ffff8800352561c0 000000000000047c 0000000000000000 ffff880035b36d80 [ 28.796016] Call Trace: [ 28.796016] [<ffffffff8121045d>] ? do_execveat_common.isra.34+0x74d/0x930 [ 28.796016] [<ffffffff812102d3>] ? do_execveat_common.isra.34+0x5c3/0x930 [ 28.796016] [<ffffffff8121066c>] do_execve+0x2c/0x30 [ 28.796016] [<ffffffff810939a0>] call_usermodehelper_exec_async+0xf0/0x140 [ 28.796016] [<ffffffff810938b0>] ? umh_complete+0x40/0x40 [ 28.796016] [<ffffffff815cb1af>] ret_from_fork+0x3f/0x70 [ 28.796016] Code: 48 8d 47 1c 48 89 e5 53 48 8b 37 48 89 fb 48 39 c6 74 1a 48 8b 3d 7e e9 8f 00 e8 49 fa fc ff 48 89 df e8 f1 01 fd ff 5b 5d f3 c3 <0f> 0b 48 89 fe 48 8b 3d 61 e9 8f 00 e8 2c fa fc ff 5b 5d eb e9 [ 28.796016] RIP [<ffffffff812187b3>] putname+0x43/0x60 [ 28.796016] RSP <ffff88003592fe88> Fixes: 193125d ("net: Introduce VRF device driver") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: For 4.3, retain the kfree() on failure] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Executing from a non-executable area gives an ugly message: lkdtm: Performing direct entry EXEC_RODATA lkdtm: attempting ok execution at ffff0000084c0e08 lkdtm: attempting bad execution at ffff000008880700 Bad mode in Synchronous Abort handler detected on CPU2, code 0x8400000e -- IABT (current EL) CPU: 2 PID: 998 Comm: sh Not tainted 4.7.0-rc2+ openbmc#13 Hardware name: linux,dummy-virt (DT) task: ffff800077e35780 ti: ffff800077970000 task.ti: ffff800077970000 PC is at lkdtm_rodata_do_nothing+0x0/0x8 LR is at execute_location+0x74/0x88 The 'IABT (current EL)' indicates the error but it's a bit cryptic without knowledge of the ARM ARM. There is also no indication of the specific address which triggered the fault. The increase in kernel page permissions makes hitting this case more likely as well. Handling the case in the vectors gives a much more familiar looking error message: lkdtm: Performing direct entry EXEC_RODATA lkdtm: attempting ok execution at ffff0000084c0840 lkdtm: attempting bad execution at ffff000008880680 Unable to handle kernel paging request at virtual address ffff000008880680 pgd = ffff8000089b2000 [ffff000008880680] *pgd=00000000489b4003, *pud=0000000048904003, *pmd=0000000000000000 Internal error: Oops: 8400000e [openbmc#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 997 Comm: sh Not tainted 4.7.0-rc1+ openbmc#24 Hardware name: linux,dummy-virt (DT) task: ffff800077f9f080 ti: ffff800008a1c000 task.ti: ffff800008a1c000 PC is at lkdtm_rodata_do_nothing+0x0/0x8 LR is at execute_location+0x74/0x88 Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

=============================== [ INFO: suspicious RCU usage. ] 4.8.0+ openbmc#24 Not tainted ------------------------------- ./arch/x86/include/asm/msr-trace.h:47 suspicious rcu_dereference_check() usage! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! no locks held by swapper/1/0. [<ffffffff9d492b95>] do_trace_write_msr+0x135/0x140 [<ffffffff9d06f860>] native_write_msr+0x20/0x30 [<ffffffff9d065fad>] native_apic_msr_eoi_write+0x1d/0x30 [<ffffffff9d05bd1d>] smp_reschedule_interrupt+0x1d/0x30 [<ffffffff9d8daec6>] reschedule_interrupt+0x96/0xa0 Reschedule interrupt may be called in cpu idle state. This causes lockdep check warning above. Add irq_enter/exit() in smp_reschedule_interrupt(), irq_enter() tells the RCU subsystems to end the extended quiescent state, so the following trace call in ack_APIC_irq() works correctly. Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Link: http://lkml.kernel.org/r/1476409733-5133-1-git-send-email-wanpeng.li@hotmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

The RANDOMIZE_MODULE_REGION_FULL Kconfig option allows KASLR to be configured in such a way that kernel modules and the core kernel are allocated completely independently, which implies that modules are likely to require branches via PLT entries to reach the core kernel. The dynamic ftrace code does not expect that, and assumes that it can patch module code to perform a relative branch to anywhere in the core kernel. This may result in errors such as branch_imm_common: offset out of range ------------[ cut here ]------------ WARNING: CPU: 3 PID: 196 at kernel/trace/ftrace.c:1995 ftrace_bug+0x220/0x2e8 Modules linked in: CPU: 3 PID: 196 Comm: systemd-udevd Not tainted 4.8.0-22-generic openbmc#24 Hardware name: AMD Seattle/Seattle, BIOS 10:34:40 Oct 6 2016 task: ffff8d1bef7dde80 task.stack: ffff8d1bef6b0000 PC is at ftrace_bug+0x220/0x2e8 LR is at ftrace_process_locs+0x330/0x430 So make RANDOMIZE_MODULE_REGION_FULL mutually exclusive with DYNAMIC_FTRACE at the Kconfig level. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>

The data_mutex is initialized too late, as it is needed for each device driver's power control, causing an OOPS: dvb-usb: found a 'TerraTec/qanu USB2.0 Highspeed DVB-T Receiver' in warm state. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff846617af>] __mutex_lock_slowpath+0x6f/0x100 PGD 0 Oops: 0002 [openbmc#1] SMP Modules linked in: dvb_usb_cinergyT2(+) dvb_usb CPU: 0 PID: 2029 Comm: modprobe Not tainted 4.9.0-rc4-dvbmod openbmc#24 Hardware name: FUJITSU LIFEBOOK A544/FJNBB35 , BIOS Version 1.17 05/09/2014 task: ffff88020e943840 task.stack: ffff8801f36ec000 RIP: 0010:[<ffffffff846617af>] [<ffffffff846617af>] __mutex_lock_slowpath+0x6f/0x100 RSP: 0018:ffff8801f36efb10 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff88021509bdc8 RCX: 00000000c0000100 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff88021509bdcc RBP: ffff8801f36efb58 R08: ffff88021f216320 R09: 0000000000100000 R10: ffff88021f216320 R11: 00000023fee6c5a1 R12: ffff88020e943840 R13: ffff88021509bdcc R14: 00000000ffffffff R15: ffff88021509bdd0 FS: 00007f21adb86740(0000) GS:ffff88021f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000215bce000 CR4: 00000000001406f0 Call Trace: mutex_lock+0x16/0x25 cinergyt2_power_ctrl+0x1f/0x60 [dvb_usb_cinergyT2] dvb_usb_device_init+0x21e/0x5d0 [dvb_usb] cinergyt2_usb_probe+0x21/0x50 [dvb_usb_cinergyT2] usb_probe_interface+0xf3/0x2a0 driver_probe_device+0x208/0x2b0 __driver_attach+0x87/0x90 driver_probe_device+0x2b0/0x2b0 bus_for_each_dev+0x52/0x80 bus_add_driver+0x1a3/0x220 driver_register+0x56/0xd0 usb_register_driver+0x77/0x130 do_one_initcall+0x46/0x180 free_vmap_area_noflush+0x38/0x70 kmem_cache_alloc+0x84/0xc0 do_init_module+0x50/0x1be load_module+0x1d8b/0x2100 find_symbol_in_section+0xa0/0xa0 SyS_finit_module+0x89/0x90 entry_SYSCALL_64_fastpath+0x13/0x94 Code: e8 a7 1d 00 00 8b 03 83 f8 01 0f 84 97 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 4c 89 3c 24 41 be ff ff ff ff 48 89 44 24 08 <48> 89 20 4c 89 64 24 10 eb 1a 49 c7 44 24 08 02 00 00 00 c6 43 RIP [<ffffffff846617af>] __mutex_lock_slowpath+0x6f/0x100 RSP <ffff8801f36efb10> CR2: 0000000000000000 So, move it to the struct dvb_usb_device and initialize it before calling the driver's callbacks. Reported-by: Jörg Otte <jrg.otte@gmail.com> Tested-by: Jörg Otte <jrg.otte@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I got the following stack trace under qemu: [ 7.575243] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [ 7.596098] IP: [<ffffffff814f5b08>] cmos_set_alarm+0x38/0x280 [ 7.615699] PGD 3ccbe067 [ 7.615923] PUD 3daf2067 [ 7.635156] PMD 0 [ 7.654358] Oops: 0000 [openbmc#1] SMP [ 7.673869] Modules linked in: [ 7.693235] CPU: 0 PID: 1701 Comm: hwclock Tainted: G W 4.9.0-rc1+ openbmc#24 [ 7.712455] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 [ 7.753569] task: ffff88003d88dc40 task.stack: ffffc90000224000 [ 7.773743] RIP: 0010:[<ffffffff814f5b08>] [<ffffffff814f5b08>] cmos_set_alarm+0x38/0x280 [ 7.794893] RSP: 0018:ffffc90000227c10 EFLAGS: 00010296 [ 7.815890] RAX: 000000000000001d RBX: ffffc90000227d28 RCX: ffffffff8182be78 [ 7.836057] RDX: 0000000000000001 RSI: 0000000000000202 RDI: 0000000000000202 [ 7.856612] RBP: ffffc90000227c48 R08: 0000000000000000 R09: 0000000000000001 [ 7.877561] R10: 00000000000001c0 R11: 00000000000001c0 R12: 0000000000000000 [ 7.897072] R13: ffff88003d96f400 R14: ffff88003dac6410 R15: ffff88003dac6420 [ 7.917403] FS: 00007f77f42d9700(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 [ 7.938293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7.958364] CR2: 0000000000000010 CR3: 000000003ccbb000 CR4: 00000000000006f0 [ 7.978028] Stack: [ 7.997120] ffff88003dac6000 ffff88003dac6410 0000000058049d01 ffffc90000227d28 [ 8.016993] ffff88003dac6000 ffff88003dac6410 ffff88003dac6420 ffffc90000227c98 [ 8.039505] ffffffff814f225d 0000001800227c98 000000090000002a 0000000900000011 [ 8.059985] Call Trace: [ 8.080110] [<ffffffff814f225d>] __rtc_set_alarm+0x8d/0xa0 [ 8.099421] [<ffffffff814f2389>] rtc_timer_enqueue+0x119/0x190 [ 8.119925] [<ffffffff814f2e6e>] rtc_update_irq_enable+0xbe/0x100 [ 8.140583] [<ffffffff814f3bb0>] rtc_dev_ioctl+0x3c0/0x480 [ 8.161162] [<ffffffff81146b6a>] ? user_path_at_empty+0x3a/0x50 [ 8.182717] [<ffffffff8114aa36>] do_vfs_ioctl+0x96/0x5c0 [ 8.204624] [<ffffffff8113e066>] ? vfs_stat+0x16/0x20 [ 8.225994] [<ffffffff8113e135>] ? SyS_newstat+0x15/0x30 [ 8.247043] [<ffffffff8114afa7>] SyS_ioctl+0x47/0x80 [ 8.267191] [<ffffffff815f5c77>] entry_SYSCALL_64_fastpath+0x1a/0xa9 [ 8.288719] Code: 6a 81 48 89 e5 41 57 41 56 41 55 49 89 fd 41 54 53 48 89 f3 48 c7 c6 20 c4 78 81 48 83 ec 10 e8 8f 00 ef ff 4d 8b a5 a0 00 00 00 <41> 8b 44 24 10 85 c0 0f 8e 2b 02 00 00 4c 89 ef 31 c0 b9 53 01 [ 8.335233] RIP [<ffffffff814f5b08>] cmos_set_alarm+0x38/0x280 [ 8.357096] RSP <ffffc90000227c10> [ 8.379051] CR2: 0000000000000010 [ 8.401736] ---[ end trace 5cbcd83a1f225ed3 ]--- This occur only when CONFIG_DEBUG_TEST_DRIVER_REMOVE is enabled and CONFIG_RTC_DRV_CMOS builtin. When cmos_set_alarm() is called dev is NULL and so trigger the deref via cmos->irq The problem comes from that the device is removed but no remove function are called due to _exit_p(). This patch remove all _exit_p() annotation. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

[ Upstream commit 45caeaa ] As Eric Dumazet pointed out this also needs to be fixed in IPv6. v2: Contains the IPv6 tcp/Ipv6 dccp patches as well. We have seen a few incidents lately where a dst_enty has been freed with a dangling TCP socket reference (sk->sk_dst_cache) pointing to that dst_entry. If the conditions/timings are right a crash then ensues when the freed dst_entry is referenced later on. A Common crashing back trace is: openbmc#8 [] page_fault at ffffffff8163e648 [exception RIP: __tcp_ack_snd_check+74] . . openbmc#9 [] tcp_rcv_established at ffffffff81580b64 openbmc#10 [] tcp_v4_do_rcv at ffffffff8158b54a openbmc#11 [] tcp_v4_rcv at ffffffff8158cd02 openbmc#12 [] ip_local_deliver_finish at ffffffff815668f4 openbmc#13 [] ip_local_deliver at ffffffff81566bd9 openbmc#14 [] ip_rcv_finish at ffffffff8156656d openbmc#15 [] ip_rcv at ffffffff81566f06 openbmc#16 [] __netif_receive_skb_core at ffffffff8152b3a2 openbmc#17 [] __netif_receive_skb at ffffffff8152b608 openbmc#18 [] netif_receive_skb at ffffffff8152b690 openbmc#19 [] vmxnet3_rq_rx_complete at ffffffffa015eeaf [vmxnet3] openbmc#20 [] vmxnet3_poll_rx_only at ffffffffa015f32a [vmxnet3] openbmc#21 [] net_rx_action at ffffffff8152bac2 openbmc#22 [] __do_softirq at ffffffff81084b4f openbmc#23 [] call_softirq at ffffffff8164845c openbmc#24 [] do_softirq at ffffffff81016fc5 openbmc#25 [] irq_exit at ffffffff81084ee5 openbmc#26 [] do_IRQ at ffffffff81648ff8 Of course it may happen with other NIC drivers as well. It's found the freed dst_entry here: 224 static bool tcp_in_quickack_mode(struct sock *sk)↩ 225 {↩ 226 ▹ const struct inet_connection_sock *icsk = inet_csk(sk);↩ 227 ▹ const struct dst_entry *dst = __sk_dst_get(sk);↩ 228 ↩ 229 ▹ return (dst && dst_metric(dst, RTAX_QUICKACK)) ||↩ 230 ▹ ▹ (icsk->icsk_ack.quick && !icsk->icsk_ack.pingpong);↩ 231 }↩ But there are other backtraces attributed to the same freed dst_entry in netfilter code as well. All the vmcores showed 2 significant clues: - Remote hosts behind the default gateway had always been redirected to a different gateway. A rtable/dst_entry will be added for that host. Making more dst_entrys with lower reference counts. Making this more probable. - All vmcores showed a postitive LockDroppedIcmps value, e.g: LockDroppedIcmps 267 A closer look at the tcp_v4_err() handler revealed that do_redirect() will run regardless of whether user space has the socket locked. This can result in a race condition where the same dst_entry cached in sk->sk_dst_entry can be decremented twice for the same socket via: do_redirect()->__sk_dst_check()-> dst_release(). Which leads to the dst_entry being prematurely freed with another socket pointing to it via sk->sk_dst_cache and a subsequent crash. To fix this skip do_redirect() if usespace has the socket locked. Instead let the redirect take place later when user space does not have the socket locked. The dccp/IPv6 code is very similar in this respect, so fixing it there too. As Eric Garver pointed out the following commit now invalidates routes. Which can set the dst->obsolete flag so that ipv4_dst_check() returns null and triggers the dst_release(). Fixes: ceb3320 ("ipv4: Kill routes during PMTU/redirect updates.") Cc: Eric Garver <egarver@redhat.com> Cc: Hannes Sowa <hsowa@redhat.com> Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Preemption can occur during cancel preemption timer, and there will be inconsistent status in lapic, vmx and vmcs field. CPU0 CPU1 preemption timer vmexit handle_preemption_timer(vCPU0) kvm_lapic_expired_hv_timer vmx_cancel_hv_timer vmx->hv_deadline_tsc = -1 vmcs_clear_bits /* hv_timer_in_use still true */ sched_out sched_in kvm_arch_vcpu_load vmx_set_hv_timer write vmx->hv_deadline_tsc vmcs_set_bits /* back in kvm_lapic_expired_hv_timer */ hv_timer_in_use = false ... vmx_vcpu_run vmx_arm_hv_run write preemption timer deadline spurious preemption timer vmexit handle_preemption_timer(vCPU0) kvm_lapic_expired_hv_timer WARN_ON(!apic->lapic_timer.hv_timer_in_use); This can be reproduced sporadically during boot of L2 on a preemptible L1, causing a splat on L1. WARNING: CPU: 3 PID: 1952 at arch/x86/kvm/lapic.c:1529 kvm_lapic_expired_hv_timer+0xb5/0xd0 [kvm] CPU: 3 PID: 1952 Comm: qemu-system-x86 Not tainted 4.12.0-rc1+ openbmc#24 RIP: 0010:kvm_lapic_expired_hv_timer+0xb5/0xd0 [kvm] Call Trace: handle_preemption_timer+0xe/0x20 [kvm_intel] vmx_handle_exit+0xc9/0x15f0 [kvm_intel] ? lock_acquire+0xdb/0x250 ? lock_acquire+0xdb/0x250 ? kvm_arch_vcpu_ioctl_run+0xdf3/0x1ce0 [kvm] kvm_arch_vcpu_ioctl_run+0xe55/0x1ce0 [kvm] kvm_vcpu_ioctl+0x384/0x7b0 [kvm] ? kvm_vcpu_ioctl+0x384/0x7b0 [kvm] ? __fget+0xf3/0x210 do_vfs_ioctl+0xa4/0x700 ? __fget+0x114/0x210 SyS_ioctl+0x79/0x90 do_syscall_64+0x8f/0x750 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL64_slow_path+0x25/0x25 This patch fixes it by disabling preemption while cancelling preemption timer. This way cancel_hv_timer is atomic with respect to kvm_arch_vcpu_load. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

commit 5cc41e0 upstream. WHen registering a new binfmt_misc handler, it is possible to overflow the offset to get a negative value, which might crash the system, or possibly leak kernel data. Here is a crash log when 2500000000 was used as an offset: BUG: unable to handle kernel paging request at ffff989cfd6edca0 IP: load_misc_binary+0x22b/0x470 [binfmt_misc] PGD 1ef3e067 P4D 1ef3e067 PUD 0 Oops: 0000 [#1] SMP NOPTI Modules linked in: binfmt_misc kvm_intel ppdev kvm irqbypass joydev input_leds serio_raw mac_hid parport_pc qemu_fw_cfg parpy CPU: 0 PID: 2499 Comm: bash Not tainted 4.15.0-22-generic #24-Ubuntu Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-1 04/01/2014 RIP: 0010:load_misc_binary+0x22b/0x470 [binfmt_misc] Call Trace: search_binary_handler+0x97/0x1d0 do_execveat_common.isra.34+0x667/0x810 SyS_execve+0x31/0x40 do_syscall_64+0x73/0x130 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Use kstrtoint instead of simple_strtoul. It will work as the code already set the delimiter byte to '\0' and we only do it when the field is not empty. Tested with offsets -1, 2500000000, UINT_MAX and INT_MAX. Also tested with examples documented at Documentation/admin-guide/binfmt-misc.rst and other registrations from packages on Ubuntu. Link: http://lkml.kernel.org/r/20180529135648.14254-1-cascardo@canonical.com Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 36eb8ff upstream. Crash dump shows following instructions crash> bt PID: 0 TASK: ffffffffbe412480 CPU: 0 COMMAND: "swapper/0" #0 [ffff891ee0003868] machine_kexec at ffffffffbd063ef1 #1 [ffff891ee00038c8] __crash_kexec at ffffffffbd12b6f2 #2 [ffff891ee0003998] crash_kexec at ffffffffbd12c84c #3 [ffff891ee00039b8] oops_end at ffffffffbd030f0a #4 [ffff891ee00039e0] no_context at ffffffffbd074643 #5 [ffff891ee0003a40] __bad_area_nosemaphore at ffffffffbd07496e #6 [ffff891ee0003a90] bad_area_nosemaphore at ffffffffbd074a64 #7 [ffff891ee0003aa0] __do_page_fault at ffffffffbd074b0a #8 [ffff891ee0003b18] do_page_fault at ffffffffbd074fc8 #9 [ffff891ee0003b50] page_fault at ffffffffbda01925 [exception RIP: qlt_schedule_sess_for_deletion+15] RIP: ffffffffc02e526f RSP: ffff891ee0003c08 RFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffc0307847 RDX: 00000000000020e6 RSI: ffff891edbc377c8 RDI: 0000000000000000 RBP: ffff891ee0003c18 R8: ffffffffc02f0b20 R9: 0000000000000250 R10: 0000000000000258 R11: 000000000000b780 R12: ffff891ed9b43000 R13: 00000000000000f0 R14: 0000000000000006 R15: ffff891edbc377c8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff891ee0003c20] qla2x00_fcport_event_handler at ffffffffc02853d3 [qla2xxx] #11 [ffff891ee0003cf0] __dta_qla24xx_async_gnl_sp_done_333 at ffffffffc0285a1d [qla2xxx] #12 [ffff891ee0003de8] qla24xx_process_response_queue at ffffffffc02a2eb5 [qla2xxx] #13 [ffff891ee0003e88] qla24xx_msix_rsp_q at ffffffffc02a5403 [qla2xxx] #14 [ffff891ee0003ec0] __handle_irq_event_percpu at ffffffffbd0f4c59 #15 [ffff891ee0003f10] handle_irq_event_percpu at ffffffffbd0f4e02 #16 [ffff891ee0003f40] handle_irq_event at ffffffffbd0f4e90 #17 [ffff891ee0003f68] handle_edge_irq at ffffffffbd0f8984 #18 [ffff891ee0003f88] handle_irq at ffffffffbd0305d5 #19 [ffff891ee0003fb8] do_IRQ at ffffffffbda02a18 --- <IRQ stack> --- #20 [ffffffffbe403d30] ret_from_intr at ffffffffbda0094e [exception RIP: unknown or invalid address] RIP: 000000000000001f RSP: 0000000000000000 RFLAGS: fff3b8c2091ebb3f RAX: ffffbba5a0000200 RBX: 0000be8cdfa8f9fa RCX: 0000000000000018 RDX: 0000000000000101 RSI: 000000000000015d RDI: 0000000000000193 RBP: 0000000000000083 R8: ffffffffbe403e38 R9: 0000000000000002 R10: 0000000000000000 R11: ffffffffbe56b820 R12: ffff891ee001cf00 R13: ffffffffbd11c0a4 R14: ffffffffbe403d60 R15: 0000000000000001 ORIG_RAX: ffff891ee0022ac0 CS: 0000 SS: ffffffffffffffb9 bt: WARNING: possibly bogus exception frame #21 [ffffffffbe403dd8] cpuidle_enter_state at ffffffffbd67c6fd #22 [ffffffffbe403e40] cpuidle_enter at ffffffffbd67c907 #23 [ffffffffbe403e50] call_cpuidle at ffffffffbd0d98f3 #24 [ffffffffbe403e60] do_idle at ffffffffbd0d9b42 #25 [ffffffffbe403e98] cpu_startup_entry at ffffffffbd0d9da3 #26 [ffffffffbe403ec0] rest_init at ffffffffbd81d4aa #27 [ffffffffbe403ed0] start_kernel at ffffffffbe67d2ca #28 [ffffffffbe403f28] x86_64_start_reservations at ffffffffbe67c675 #29 [ffffffffbe403f38] x86_64_start_kernel at ffffffffbe67c6eb #30 [ffffffffbe403f50] secondary_startup_64 at ffffffffbd0000d5 Fixes: 040036b ("scsi: qla2xxx: Delay loop id allocation at login") Cc: <stable@vger.kernel.org> # v4.17+ Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 0026129 ] rhashtable_free_and_destroy() cancels re-hash deferred work then walks and destroys elements. at this moment, some elements can be still in future_tbl. that elements are not destroyed. test case: nft_rhash_destroy() calls rhashtable_free_and_destroy() to destroy all elements of sets before destroying sets and chains. But rhashtable_free_and_destroy() doesn't destroy elements of future_tbl. so that splat occurred. test script: %cat test.nft table ip aa { map map1 { type ipv4_addr : verdict; elements = { 0 : jump a0, 1 : jump a0, 2 : jump a0, 3 : jump a0, 4 : jump a0, 5 : jump a0, 6 : jump a0, 7 : jump a0, 8 : jump a0, 9 : jump a0, } } chain a0 { } } flush ruleset table ip aa { map map1 { type ipv4_addr : verdict; elements = { 0 : jump a0, 1 : jump a0, 2 : jump a0, 3 : jump a0, 4 : jump a0, 5 : jump a0, 6 : jump a0, 7 : jump a0, 8 : jump a0, 9 : jump a0, } } chain a0 { } } flush ruleset %while :; do nft -f test.nft; done Splat looks like: [ 200.795603] kernel BUG at net/netfilter/nf_tables_api.c:1363! [ 200.806944] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 200.812253] CPU: 1 PID: 1582 Comm: nft Not tainted 4.17.0+ #24 [ 200.820297] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015 [ 200.830309] RIP: 0010:nf_tables_chain_destroy.isra.34+0x62/0x240 [nf_tables] [ 200.838317] Code: 43 50 85 c0 74 26 48 8b 45 00 48 8b 4d 08 ba 54 05 00 00 48 c7 c6 60 6d 29 c0 48 c7 c7 c0 65 29 c0 4c 8b 40 08 e8 58 e5 fd f8 <0f> 0b 48 89 da 48 b8 00 00 00 00 00 fc ff [ 200.860366] RSP: 0000:ffff880118dbf4d0 EFLAGS: 00010282 [ 200.866354] RAX: 0000000000000061 RBX: ffff88010cdeaf08 RCX: 0000000000000000 [ 200.874355] RDX: 0000000000000061 RSI: 0000000000000008 RDI: ffffed00231b7e90 [ 200.882361] RBP: ffff880118dbf4e8 R08: ffffed002373bcfb R09: ffffed002373bcfa [ 200.890354] R10: 0000000000000000 R11: ffffed002373bcfb R12: dead000000000200 [ 200.898356] R13: dead000000000100 R14: ffffffffbb62af38 R15: dffffc0000000000 [ 200.906354] FS: 00007fefc31fd700(0000) GS:ffff88011b800000(0000) knlGS:0000000000000000 [ 200.915533] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 200.922355] CR2: 0000557f1c8e9128 CR3: 0000000106880000 CR4: 00000000001006e0 [ 200.930353] Call Trace: [ 200.932351] ? nf_tables_commit+0x26f6/0x2c60 [nf_tables] [ 200.939525] ? nf_tables_setelem_notify.constprop.49+0x1a0/0x1a0 [nf_tables] [ 200.947525] ? nf_tables_delchain+0x6e0/0x6e0 [nf_tables] [ 200.952383] ? nft_add_set_elem+0x1700/0x1700 [nf_tables] [ 200.959532] ? nla_parse+0xab/0x230 [ 200.963529] ? nfnetlink_rcv_batch+0xd06/0x10d0 [nfnetlink] [ 200.968384] ? nfnetlink_net_init+0x130/0x130 [nfnetlink] [ 200.975525] ? debug_show_all_locks+0x290/0x290 [ 200.980363] ? debug_show_all_locks+0x290/0x290 [ 200.986356] ? sched_clock_cpu+0x132/0x170 [ 200.990352] ? find_held_lock+0x39/0x1b0 [ 200.994355] ? sched_clock_local+0x10d/0x130 [ 200.999531] ? memset+0x1f/0x40 V2: - free all tables requested by Herbert Xu Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e88439d ] [BUG] Lockdep will report the following circular locking dependency: WARNING: possible circular locking dependency detected 5.2.0-rc2-custom #24 Tainted: G O ------------------------------------------------------ btrfs/8631 is trying to acquire lock: 000000002536438c (&fs_info->qgroup_ioctl_lock#2){+.+.}, at: btrfs_qgroup_inherit+0x40/0x620 [btrfs] but task is already holding lock: 000000003d52cc23 (&fs_info->tree_log_mutex){+.+.}, at: create_pending_snapshot+0x8b6/0xe60 [btrfs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&fs_info->tree_log_mutex){+.+.}: __mutex_lock+0x76/0x940 mutex_lock_nested+0x1b/0x20 btrfs_commit_transaction+0x475/0xa00 [btrfs] btrfs_commit_super+0x71/0x80 [btrfs] close_ctree+0x2bd/0x320 [btrfs] btrfs_put_super+0x15/0x20 [btrfs] generic_shutdown_super+0x72/0x110 kill_anon_super+0x18/0x30 btrfs_kill_super+0x16/0xa0 [btrfs] deactivate_locked_super+0x3a/0x80 deactivate_super+0x51/0x60 cleanup_mnt+0x3f/0x80 __cleanup_mnt+0x12/0x20 task_work_run+0x94/0xb0 exit_to_usermode_loop+0xd8/0xe0 do_syscall_64+0x210/0x240 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #1 (&fs_info->reloc_mutex){+.+.}: __mutex_lock+0x76/0x940 mutex_lock_nested+0x1b/0x20 btrfs_commit_transaction+0x40d/0xa00 [btrfs] btrfs_quota_enable+0x2da/0x730 [btrfs] btrfs_ioctl+0x2691/0x2b40 [btrfs] do_vfs_ioctl+0xa9/0x6d0 ksys_ioctl+0x67/0x90 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x65/0x240 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (&fs_info->qgroup_ioctl_lock#2){+.+.}: lock_acquire+0xa7/0x190 __mutex_lock+0x76/0x940 mutex_lock_nested+0x1b/0x20 btrfs_qgroup_inherit+0x40/0x620 [btrfs] create_pending_snapshot+0x9d7/0xe60 [btrfs] create_pending_snapshots+0x94/0xb0 [btrfs] btrfs_commit_transaction+0x415/0xa00 [btrfs] btrfs_mksubvol+0x496/0x4e0 [btrfs] btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs] btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs] btrfs_ioctl+0xa90/0x2b40 [btrfs] do_vfs_ioctl+0xa9/0x6d0 ksys_ioctl+0x67/0x90 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x65/0x240 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Chain exists of: &fs_info->qgroup_ioctl_lock#2 --> &fs_info->reloc_mutex --> &fs_info->tree_log_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->tree_log_mutex); lock(&fs_info->reloc_mutex); lock(&fs_info->tree_log_mutex); lock(&fs_info->qgroup_ioctl_lock#2); *** DEADLOCK *** 6 locks held by btrfs/8631: #0: 00000000ed8f23f6 (sb_writers#12){.+.+}, at: mnt_want_write_file+0x28/0x60 #1: 000000009fb1597a (&type->i_mutex_dir_key#10/1){+.+.}, at: btrfs_mksubvol+0x70/0x4e0 [btrfs] #2: 0000000088c5ad88 (&fs_info->subvol_sem){++++}, at: btrfs_mksubvol+0x128/0x4e0 [btrfs] #3: 000000009606fc3e (sb_internal#2){.+.+}, at: start_transaction+0x37a/0x520 [btrfs] #4: 00000000f82bbdf5 (&fs_info->reloc_mutex){+.+.}, at: btrfs_commit_transaction+0x40d/0xa00 [btrfs] #5: 000000003d52cc23 (&fs_info->tree_log_mutex){+.+.}, at: create_pending_snapshot+0x8b6/0xe60 [btrfs] [CAUSE] Due to the delayed subvolume creation, we need to call btrfs_qgroup_inherit() inside commit transaction code, with a lot of other mutex hold. This hell of lock chain can lead to above problem. [FIX] On the other hand, we don't really need to hold qgroup_ioctl_lock if we're in the context of create_pending_snapshot(). As in that context, we're the only one being able to modify qgroup. All other qgroup functions which needs qgroup_ioctl_lock are either holding a transaction handle, or will start a new transaction: Functions will start a new transaction(): * btrfs_quota_enable() * btrfs_quota_disable() Functions hold a transaction handler: * btrfs_add_qgroup_relation() * btrfs_del_qgroup_relation() * btrfs_create_qgroup() * btrfs_remove_qgroup() * btrfs_limit_qgroup() * btrfs_qgroup_inherit() call inside create_subvol() So we have a higher level protection provided by transaction, thus we don't need to always hold qgroup_ioctl_lock in btrfs_qgroup_inherit(). Only the btrfs_qgroup_inherit() call in create_subvol() needs to hold qgroup_ioctl_lock, while the btrfs_qgroup_inherit() call in create_pending_snapshot() is already protected by transaction. So the fix is to detect the context by checking trans->transaction->state. If we're at TRANS_STATE_COMMIT_DOING, then we're in commit transaction context and no need to get the mutex. Reported-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit d0a255e upstream. A deadlock with this stacktrace was observed. The loop thread does a GFP_KERNEL allocation, it calls into dm-bufio shrinker and the shrinker depends on I/O completion in the dm-bufio subsystem. In order to fix the deadlock (and other similar ones), we set the flag PF_MEMALLOC_NOIO at loop thread entry. PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0" #0 [ffff8813dedfb938] __schedule at ffffffff8173f405 #1 [ffff8813dedfb990] schedule at ffffffff8173fa27 #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186 #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f #5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8 #6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81 #7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio] #8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio] #9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio] #10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce #11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778 #12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f #13 [ffff8813dedfbec0] kthread at ffffffff810a8428 #14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242 PID: 14127 TASK: ffff881455749c00 CPU: 11 COMMAND: "loop1" #0 [ffff88272f5af228] __schedule at ffffffff8173f405 #1 [ffff88272f5af280] schedule at ffffffff8173fa27 #2 [ffff88272f5af2a0] schedule_preempt_disabled at ffffffff8173fd5e #3 [ffff88272f5af2b0] __mutex_lock_slowpath at ffffffff81741fb5 #4 [ffff88272f5af330] mutex_lock at ffffffff81742133 #5 [ffff88272f5af350] dm_bufio_shrink_count at ffffffffa03865f9 [dm_bufio] #6 [ffff88272f5af380] shrink_slab at ffffffff811a86bd #7 [ffff88272f5af470] shrink_zone at ffffffff811ad778 #8 [ffff88272f5af500] do_try_to_free_pages at ffffffff811adb34 #9 [ffff88272f5af590] try_to_free_pages at ffffffff811adef8 #10 [ffff88272f5af610] __alloc_pages_nodemask at ffffffff811a09c3 #11 [ffff88272f5af710] alloc_pages_current at ffffffff811e8b71 #12 [ffff88272f5af760] new_slab at ffffffff811f4523 #13 [ffff88272f5af7b0] __slab_alloc at ffffffff8173a1b5 #14 [ffff88272f5af880] kmem_cache_alloc at ffffffff811f484b #15 [ffff88272f5af8d0] do_blockdev_direct_IO at ffffffff812535b3 #16 [ffff88272f5afb00] __blockdev_direct_IO at ffffffff81255dc3 #17 [ffff88272f5afb30] xfs_vm_direct_IO at ffffffffa01fe3fc [xfs] #18 [ffff88272f5afb90] generic_file_read_iter at ffffffff81198994 #19 [ffff88272f5afc50] __dta_xfs_file_read_iter_2398 at ffffffffa020c970 [xfs] #20 [ffff88272f5afcc0] lo_rw_aio at ffffffffa0377042 [loop] #21 [ffff88272f5afd70] loop_queue_work at ffffffffa0377c3b [loop] #22 [ffff88272f5afe60] kthread_worker_fn at ffffffff810a8a0c #23 [ffff88272f5afec0] kthread at ffffffff810a8428 #24 [ffff88272f5aff50] ret_from_fork at ffffffff81745242 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9c09b21 upstream. syzbot found the following crash on: HEAD commit: e96407b4 usb-fuzzer: main usb gadget fuzzer driver git tree: https://github.com/google/kasan.git usb-fuzzer console output: https://syzkaller.appspot.com/x/log.txt?x=147ac20c600000 kernel config: https://syzkaller.appspot.com/x/.config?x=792eb47789f57810 dashboard link: https://syzkaller.appspot.com/bug?extid=62a1e04fd3ec2abf099e compiler: gcc (GCC) 9.0.0 20181231 (experimental) ================================================================== BUG: KASAN: use-after-free in __lock_acquire+0x302a/0x3b50 kernel/locking/lockdep.c:3753 Read of size 8 at addr ffff8881cf591a08 by task syz-executor.1/26260 CPU: 1 PID: 26260 Comm: syz-executor.1 Not tainted 5.3.0-rc2+ #24 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 print_address_description+0x6a/0x32c mm/kasan/report.c:351 __kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482 kasan_report+0xe/0x12 mm/kasan/common.c:612 __lock_acquire+0x302a/0x3b50 kernel/locking/lockdep.c:3753 lock_acquire+0x127/0x320 kernel/locking/lockdep.c:4412 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x32/0x50 kernel/locking/spinlock.c:159 hiddev_release+0x82/0x520 drivers/hid/usbhid/hiddev.c:221 __fput+0x2d7/0x840 fs/file_table.c:280 task_work_run+0x13f/0x1c0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x8ef/0x2c50 kernel/exit.c:878 do_group_exit+0x125/0x340 kernel/exit.c:982 get_signal+0x466/0x23d0 kernel/signal.c:2728 do_signal+0x88/0x14e0 arch/x86/kernel/signal.c:815 exit_to_usermode_loop+0x1a2/0x200 arch/x86/entry/common.c:159 prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] syscall_return_slowpath arch/x86/entry/common.c:274 [inline] do_syscall_64+0x45f/0x580 arch/x86/entry/common.c:299 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x459829 Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f75b2a6ccf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: fffffffffffffe00 RBX: 000000000075c078 RCX: 0000000000459829 RDX: 0000000000000000 RSI: 0000000000000080 RDI: 000000000075c078 RBP: 000000000075c070 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000075c07c R13: 00007ffcdfe1023f R14: 00007f75b2a6d9c0 R15: 000000000075c07c Allocated by task 104: save_stack+0x1b/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_kmalloc mm/kasan/common.c:487 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:460 kmalloc include/linux/slab.h:552 [inline] kzalloc include/linux/slab.h:748 [inline] hiddev_connect+0x242/0x5b0 drivers/hid/usbhid/hiddev.c:900 hid_connect+0x239/0xbb0 drivers/hid/hid-core.c:1882 hid_hw_start drivers/hid/hid-core.c:1981 [inline] hid_hw_start+0xa2/0x130 drivers/hid/hid-core.c:1972 appleir_probe+0x13e/0x1a0 drivers/hid/hid-appleir.c:308 hid_device_probe+0x2be/0x3f0 drivers/hid/hid-core.c:2209 really_probe+0x281/0x650 drivers/base/dd.c:548 driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 __device_attach+0x217/0x360 drivers/base/dd.c:882 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514 device_add+0xae6/0x16f0 drivers/base/core.c:2114 hid_add_device+0x33c/0x990 drivers/hid/hid-core.c:2365 usbhid_probe+0xa81/0xfa0 drivers/hid/usbhid/hid-core.c:1386 usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361 really_probe+0x281/0x650 drivers/base/dd.c:548 driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 __device_attach+0x217/0x360 drivers/base/dd.c:882 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514 device_add+0xae6/0x16f0 drivers/base/core.c:2114 usb_set_configuration+0xdf6/0x1670 drivers/usb/core/message.c:2023 generic_probe+0x9d/0xd5 drivers/usb/core/generic.c:210 usb_probe_device+0x99/0x100 drivers/usb/core/driver.c:266 really_probe+0x281/0x650 drivers/base/dd.c:548 driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 __device_attach+0x217/0x360 drivers/base/dd.c:882 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514 device_add+0xae6/0x16f0 drivers/base/core.c:2114 usb_new_device.cold+0x6a4/0xe79 drivers/usb/core/hub.c:2536 hub_port_connect drivers/usb/core/hub.c:5098 [inline] hub_port_connect_change drivers/usb/core/hub.c:5213 [inline] port_event drivers/usb/core/hub.c:5359 [inline] hub_event+0x1b5c/0x3640 drivers/usb/core/hub.c:5441 process_one_work+0x92b/0x1530 kernel/workqueue.c:2269 worker_thread+0x96/0xe20 kernel/workqueue.c:2415 kthread+0x318/0x420 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 Freed by task 104: save_stack+0x1b/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:449 slab_free_hook mm/slub.c:1423 [inline] slab_free_freelist_hook mm/slub.c:1470 [inline] slab_free mm/slub.c:3012 [inline] kfree+0xe4/0x2f0 mm/slub.c:3953 hiddev_connect.cold+0x45/0x5c drivers/hid/usbhid/hiddev.c:914 hid_connect+0x239/0xbb0 drivers/hid/hid-core.c:1882 hid_hw_start drivers/hid/hid-core.c:1981 [inline] hid_hw_start+0xa2/0x130 drivers/hid/hid-core.c:1972 appleir_probe+0x13e/0x1a0 drivers/hid/hid-appleir.c:308 hid_device_probe+0x2be/0x3f0 drivers/hid/hid-core.c:2209 really_probe+0x281/0x650 drivers/base/dd.c:548 driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 __device_attach+0x217/0x360 drivers/base/dd.c:882 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514 device_add+0xae6/0x16f0 drivers/base/core.c:2114 hid_add_device+0x33c/0x990 drivers/hid/hid-core.c:2365 usbhid_probe+0xa81/0xfa0 drivers/hid/usbhid/hid-core.c:1386 usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361 really_probe+0x281/0x650 drivers/base/dd.c:548 driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 __device_attach+0x217/0x360 drivers/base/dd.c:882 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514 device_add+0xae6/0x16f0 drivers/base/core.c:2114 usb_set_configuration+0xdf6/0x1670 drivers/usb/core/message.c:2023 generic_probe+0x9d/0xd5 drivers/usb/core/generic.c:210 usb_probe_device+0x99/0x100 drivers/usb/core/driver.c:266 really_probe+0x281/0x650 drivers/base/dd.c:548 driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 __device_attach+0x217/0x360 drivers/base/dd.c:882 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514 device_add+0xae6/0x16f0 drivers/base/core.c:2114 usb_new_device.cold+0x6a4/0xe79 drivers/usb/core/hub.c:2536 hub_port_connect drivers/usb/core/hub.c:5098 [inline] hub_port_connect_change drivers/usb/core/hub.c:5213 [inline] port_event drivers/usb/core/hub.c:5359 [inline] hub_event+0x1b5c/0x3640 drivers/usb/core/hub.c:5441 process_one_work+0x92b/0x1530 kernel/workqueue.c:2269 worker_thread+0x96/0xe20 kernel/workqueue.c:2415 kthread+0x318/0x420 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 The buggy address belongs to the object at ffff8881cf591900 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 264 bytes inside of 512-byte region [ffff8881cf591900, ffff8881cf591b00) The buggy address belongs to the page: page:ffffea00073d6400 refcount:1 mapcount:0 mapping:ffff8881da002500 index:0x0 compound_mapcount: 0 flags: 0x200000000010200(slab|head) raw: 0200000000010200 0000000000000000 0000000100000001 ffff8881da002500 raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881cf591900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881cf591980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb > ffff8881cf591a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881cf591a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881cf591b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== In order to avoid opening a disconnected device, we need to check exist again after acquiring the existance lock, and bail out if necessary. Reported-by: syzbot <syzbot+62a1e04fd3ec2abf099e@syzkaller.appspotmail.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e24c644 ] I compiled with AddressSanitizer and I had these memory leaks while I was using the tep_parse_format function: Direct leak of 28 byte(s) in 4 object(s) allocated from: #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe) #1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985 #2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140 #3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206 #4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291 #5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299 #6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849 #7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161 #8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207 #9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786 #10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285 #11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369 #12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335 #13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389 #14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431 #15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251 #16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284 #17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593 #18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727 #19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048 #20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127 #21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152 #22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252 #23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347 #24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461 #25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673 #26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2) The token variable in the process_dynamic_array_len function is allocated in the read_expect_type function, but is not freed before calling the read_token function. Free the token variable before calling read_token in order to plug the leak. Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/linux-trace-devel/20200730150236.5392-1-pduplessis@efficios.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 859d510 ] If the specified/hinted sink is not reachable from a subset of the CPUs, we could end up unable to trace the event on those CPUs. This is the best effort we could do until we support 1:1 configurations. Fail gracefully in such cases avoiding a WARN_ON, which can be easily triggered by the user on certain platforms (Arm N1SDP), with the following trace paths : CPU0 \ -- Funnel0 --> ETF0 --> / \ CPU1 \ MainFunnel CPU2 / \ / -- Funnel1 --> ETF1 --> / CPU1 $ perf record --per-thread -e cs_etm/@ETF0/u -- <app> could trigger the following WARNING, when the event is scheduled on CPU2. [10919.513250] ------------[ cut here ]------------ [10919.517861] WARNING: CPU: 2 PID: 24021 at drivers/hwtracing/coresight/coresight-etm-perf.c:316 etm_event_start+0xf8/0x100 ... [10919.564403] CPU: 2 PID: 24021 Comm: perf Not tainted 5.8.0+ #24 [10919.570308] pstate: 80400089 (Nzcv daIf +PAN -UAO BTYPE=--) [10919.575865] pc : etm_event_start+0xf8/0x100 [10919.580034] lr : etm_event_start+0x80/0x100 [10919.584202] sp : fffffe001932f940 [10919.587502] x29: fffffe001932f940 x28: fffffc834995f800 [10919.592799] x27: 0000000000000000 x26: fffffe0011f3ced0 [10919.598095] x25: fffffc837fce244c x24: fffffc837fce2448 [10919.603391] x23: 0000000000000002 x22: fffffc8353529c00 [10919.608688] x21: fffffc835bb31000 x20: 0000000000000000 [10919.613984] x19: fffffc837fcdcc70 x18: 0000000000000000 [10919.619281] x17: 0000000000000000 x16: 0000000000000000 [10919.624577] x15: 0000000000000000 x14: 00000000000009f8 [10919.629874] x13: 00000000000009f8 x12: 0000000000000018 [10919.635170] x11: 0000000000000000 x10: 0000000000000000 [10919.640467] x9 : fffffe00108cd168 x8 : 0000000000000000 [10919.645763] x7 : 0000000000000020 x6 : 0000000000000001 [10919.651059] x5 : 0000000000000002 x4 : 0000000000000001 [10919.656356] x3 : 0000000000000000 x2 : 0000000000000000 [10919.661652] x1 : fffffe836eb40000 x0 : 0000000000000000 [10919.666949] Call trace: [10919.669382] etm_event_start+0xf8/0x100 [10919.673203] etm_event_add+0x40/0x60 [10919.676765] event_sched_in.isra.134+0xcc/0x210 [10919.681281] merge_sched_in+0xb0/0x2a8 [10919.685017] visit_groups_merge.constprop.140+0x15c/0x4b8 [10919.690400] ctx_sched_in+0x15c/0x170 [10919.694048] perf_event_sched_in+0x6c/0xa0 [10919.698130] ctx_resched+0x60/0xa0 [10919.701517] perf_event_exec+0x288/0x2f0 [10919.705425] begin_new_exec+0x4c8/0xf58 [10919.709247] load_elf_binary+0x66c/0xf30 [10919.713155] exec_binprm+0x15c/0x450 [10919.716716] __do_execve_file+0x508/0x748 [10919.720711] __arm64_sys_execve+0x40/0x50 [10919.724707] do_el0_svc+0xf4/0x1b8 [10919.728095] el0_sync_handler+0xf8/0x124 [10919.732003] el0_sync+0x140/0x180 Even though we don't support using separate sinks for the ETMs yet (e.g, for 1:1 configurations), we should at least honor the user's choice and handle the limitations gracefully, by simply skipping the tracing on ETMs which can't reach the requested sink. Fixes: f9d81a6 ("coresight: perf: Allow tracing on hotplugged CPUs") Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Reported-by: Jeremy Linton <jeremy.linton@arm.com> Tested-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200916191737.4001561-11-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 859d510 ] If the specified/hinted sink is not reachable from a subset of the CPUs, we could end up unable to trace the event on those CPUs. This is the best effort we could do until we support 1:1 configurations. Fail gracefully in such cases avoiding a WARN_ON, which can be easily triggered by the user on certain platforms (Arm N1SDP), with the following trace paths : CPU0 \ -- Funnel0 --> ETF0 --> / \ CPU1 \ MainFunnel CPU2 / \ / -- Funnel1 --> ETF1 --> / CPU1 $ perf record --per-thread -e cs_etm/@ETF0/u -- <app> could trigger the following WARNING, when the event is scheduled on CPU2. [10919.513250] ------------[ cut here ]------------ [10919.517861] WARNING: CPU: 2 PID: 24021 at drivers/hwtracing/coresight/coresight-etm-perf.c:316 etm_event_start+0xf8/0x100 ... [10919.564403] CPU: 2 PID: 24021 Comm: perf Not tainted 5.8.0+ openbmc#24 [10919.570308] pstate: 80400089 (Nzcv daIf +PAN -UAO BTYPE=--) [10919.575865] pc : etm_event_start+0xf8/0x100 [10919.580034] lr : etm_event_start+0x80/0x100 [10919.584202] sp : fffffe001932f940 [10919.587502] x29: fffffe001932f940 x28: fffffc834995f800 [10919.592799] x27: 0000000000000000 x26: fffffe0011f3ced0 [10919.598095] x25: fffffc837fce244c x24: fffffc837fce2448 [10919.603391] x23: 0000000000000002 x22: fffffc8353529c00 [10919.608688] x21: fffffc835bb31000 x20: 0000000000000000 [10919.613984] x19: fffffc837fcdcc70 x18: 0000000000000000 [10919.619281] x17: 0000000000000000 x16: 0000000000000000 [10919.624577] x15: 0000000000000000 x14: 00000000000009f8 [10919.629874] x13: 00000000000009f8 x12: 0000000000000018 [10919.635170] x11: 0000000000000000 x10: 0000000000000000 [10919.640467] x9 : fffffe00108cd168 x8 : 0000000000000000 [10919.645763] x7 : 0000000000000020 x6 : 0000000000000001 [10919.651059] x5 : 0000000000000002 x4 : 0000000000000001 [10919.656356] x3 : 0000000000000000 x2 : 0000000000000000 [10919.661652] x1 : fffffe836eb40000 x0 : 0000000000000000 [10919.666949] Call trace: [10919.669382] etm_event_start+0xf8/0x100 [10919.673203] etm_event_add+0x40/0x60 [10919.676765] event_sched_in.isra.134+0xcc/0x210 [10919.681281] merge_sched_in+0xb0/0x2a8 [10919.685017] visit_groups_merge.constprop.140+0x15c/0x4b8 [10919.690400] ctx_sched_in+0x15c/0x170 [10919.694048] perf_event_sched_in+0x6c/0xa0 [10919.698130] ctx_resched+0x60/0xa0 [10919.701517] perf_event_exec+0x288/0x2f0 [10919.705425] begin_new_exec+0x4c8/0xf58 [10919.709247] load_elf_binary+0x66c/0xf30 [10919.713155] exec_binprm+0x15c/0x450 [10919.716716] __do_execve_file+0x508/0x748 [10919.720711] __arm64_sys_execve+0x40/0x50 [10919.724707] do_el0_svc+0xf4/0x1b8 [10919.728095] el0_sync_handler+0xf8/0x124 [10919.732003] el0_sync+0x140/0x180 Even though we don't support using separate sinks for the ETMs yet (e.g, for 1:1 configurations), we should at least honor the user's choice and handle the limitations gracefully, by simply skipping the tracing on ETMs which can't reach the requested sink. Fixes: f9d81a6 ("coresight: perf: Allow tracing on hotplugged CPUs") Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Reported-by: Jeremy Linton <jeremy.linton@arm.com> Tested-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200916191737.4001561-11-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 60a707d ] Since de78a9c ("powerpc: Add a framework for Kernel Userspace Access Protection"), user access helpers call user_{read|write}_access_{begin|end} when user space access is allowed. Commit 890274c ("powerpc/64s: Implement KUAP for Radix MMU") made the mentioned helpers program a AMR special register to allow such access for a short period of time, most of the time AMR is expected to block user memory access by the kernel. Since the code accesses the user space memory, unsafe_get_user() calls might_fault() which calls arch_local_irq_restore() if either CONFIG_PROVE_LOCKING or CONFIG_DEBUG_ATOMIC_SLEEP is enabled. arch_local_irq_restore() then attempts to replay pending soft interrupts as KUAP regions have hardware interrupts enabled. If a pending interrupt happens to do user access (performance interrupts do that), it enables access for a short period of time so after returning from the replay, the user access state remains blocked and if a user page fault happens - "Bug: Read fault blocked by AMR!" appears and SIGSEGV is sent. An example trace: Bug: Read fault blocked by AMR! WARNING: CPU: 0 PID: 1603 at /home/aik/p/kernel/arch/powerpc/include/asm/book3s/64/kup-radix.h:145 CPU: 0 PID: 1603 Comm: amr Not tainted 5.10.0-rc6_v5.10-rc6_a+fstn1 #24 NIP: c00000000009ece8 LR: c00000000009ece4 CTR: 0000000000000000 REGS: c00000000dc63560 TRAP: 0700 Not tainted (5.10.0-rc6_v5.10-rc6_a+fstn1) MSR: 8000000000021033 <SF,ME,IR,DR,RI,LE> CR: 28002888 XER: 20040000 CFAR: c0000000001fa928 IRQMASK: 1 GPR00: c00000000009ece4 c00000000dc637f0 c000000002397600 000000000000001f GPR04: c0000000020eb318 0000000000000000 c00000000dc63494 0000000000000027 GPR08: c00000007fe4de68 c00000000dfe9180 0000000000000000 0000000000000001 GPR12: 0000000000002000 c0000000030a0000 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 bfffffffffffffff GPR20: 0000000000000000 c0000000134a4020 c0000000019c2218 0000000000000fe0 GPR24: 0000000000000000 0000000000000000 c00000000d106200 0000000040000000 GPR28: 0000000000000000 0000000000000300 c00000000dc63910 c000000001946730 NIP __do_page_fault+0xb38/0xde0 LR __do_page_fault+0xb34/0xde0 Call Trace: __do_page_fault+0xb34/0xde0 (unreliable) handle_page_fault+0x10/0x2c --- interrupt: 300 at strncpy_from_user+0x290/0x440 LR = strncpy_from_user+0x284/0x440 strncpy_from_user+0x2f0/0x440 (unreliable) getname_flags+0x88/0x2c0 do_sys_openat2+0x2d4/0x5f0 do_sys_open+0xcc/0x140 system_call_exception+0x160/0x240 system_call_common+0xf0/0x27c To fix it save/restore the AMR when replaying interrupts, and also add a check if AMR was not blocked prior to replaying interrupts. Originally found by syzkaller. Fixes: 890274c ("powerpc/64s: Implement KUAP for Radix MMU") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Use normal commit citation format and add full oops log to change log, move kuap_check_amr() into the restore routine to avoid warnings about unreconciled IRQ state] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210202091541.36499-1-aik@ozlabs.ru Signed-off-by: Sasha Levin <sashal@kernel.org>

…ULL pointer [ Upstream commit 0d96968 ] When function return fail to __ath11k_mac_register after success called ieee80211_register_hw, then it set wiphy->dev.parent to NULL by SET_IEEE80211_DEV(ar->hw, NULL) in end of __ath11k_mac_register, then cfg80211_get_drvinfo will be called by below call stack, but the wiphy->dev.parent is NULL, so kernel crash. Call stack to cfg80211_get_drvinfo: NetworkManager 826 [001] 6696.731371: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0) ffffffffc107d8f1 cfg80211_get_drvinfo+0x1 (/lib/modules/5.10.0-rc1-wt-ath+/kernel/net/wireless-back/cfg80211.ko) ffffffff9d8fc529 ethtool_get_drvinfo+0x99 (vmlinux) ffffffff9d90080e dev_ethtool+0x1dbe (vmlinux) ffffffff9d8b88f7 dev_ioctl+0xb7 (vmlinux) ffffffff9d8668de sock_do_ioctl+0xae (vmlinux) ffffffff9d866d60 sock_ioctl+0x350 (vmlinux) ffffffff9d2ca30e __x64_sys_ioctl+0x8e (vmlinux) ffffffff9da0dda3 do_syscall_64+0x33 (vmlinux) ffffffff9dc0008c entry_SYSCALL_64_after_hwframe+0x44 (vmlinux) 7feb5f673007 __GI___ioctl+0x7 (/lib/x86_64-linux-gnu/libc-2.23.so) 0 [unknown] ([unknown]) Code of cfg80211_get_drvinfo, the pdev which is wiphy->dev.parent is NULL when kernel crash: void cfg80211_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { struct wireless_dev *wdev = dev->ieee80211_ptr; struct device *pdev = wiphy_dev(wdev->wiphy); if (pdev->driver) .... kernel crash log: [ 973.619550] ath11k_pci 0000:05:00.0: failed to perform regd update : -16 [ 973.619555] ath11k_pci 0000:05:00.0: ath11k regd update failed: -16 [ 973.619566] ath11k_pci 0000:05:00.0: failed register the radio with mac80211: -16 [ 973.619618] ath11k_pci 0000:05:00.0: failed to create pdev core: -16 [ 973.636035] BUG: kernel NULL pointer dereference, address: 0000000000000068 [ 973.636046] #PF: supervisor read access in kernel mode [ 973.636050] #PF: error_code(0x0000) - not-present page [ 973.636054] PGD 800000012452e067 P4D 800000012452e067 PUD 12452d067 PMD 0 [ 973.636064] Oops: 0000 [#1] SMP PTI [ 973.636072] CPU: 3 PID: 848 Comm: NetworkManager Kdump: loaded Tainted: G W OE 5.10.0-rc1-wt-ath+ #24 [ 973.636076] Hardware name: LENOVO 418065C/418065C, BIOS 83ET63WW (1.33 ) 07/29/2011 [ 973.636161] RIP: 0010:cfg80211_get_drvinfo+0x25/0xd0 [cfg80211] [ 973.636169] Code: e9 c9 fe ff ff 66 66 66 66 90 55 53 ba 20 00 00 00 48 8b af 08 03 00 00 48 89 f3 48 8d 7e 04 48 8b 45 00 48 8b 80 90 01 00 00 <48> 8b 40 68 48 85 c0 0f 84 8d 00 00 00 48 8b 30 e8 a6 cc 72 c7 48 [ 973.636174] RSP: 0018:ffffaafb4040bbe0 EFLAGS: 00010286 [ 973.636180] RAX: 0000000000000000 RBX: ffffaafb4040bbfc RCX: 0000000000000000 [ 973.636184] RDX: 0000000000000020 RSI: ffffaafb4040bbfc RDI: ffffaafb4040bc00 [ 973.636188] RBP: ffff8a84c9568950 R08: 722d302e30312e35 R09: 74612d74772d3163 [ 973.636192] R10: 3163722d302e3031 R11: 2b6874612d74772d R12: ffffaafb4040bbfc [ 973.636196] R13: 00007ffe453707c0 R14: ffff8a84c9568000 R15: 0000000000000000 [ 973.636202] FS: 00007fd3d179b940(0000) GS:ffff8a84fa2c0000(0000) knlGS:0000000000000000 [ 973.636206] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 973.636211] CR2: 0000000000000068 CR3: 00000001153b6002 CR4: 00000000000606e0 [ 973.636215] Call Trace: [ 973.636234] ethtool_get_drvinfo+0x99/0x1f0 [ 973.636246] dev_ethtool+0x1dbe/0x2be0 [ 973.636256] ? mntput_no_expire+0x35/0x220 [ 973.636264] ? inet_ioctl+0x1ce/0x200 [ 973.636274] ? tomoyo_path_number_perm+0x68/0x1d0 [ 973.636282] ? kmem_cache_alloc+0x3cb/0x430 [ 973.636290] ? dev_ioctl+0xb7/0x570 [ 973.636295] dev_ioctl+0xb7/0x570 [ 973.636307] sock_do_ioctl+0xae/0x150 [ 973.636315] ? sock_ioctl+0x350/0x3c0 [ 973.636319] sock_ioctl+0x350/0x3c0 [ 973.636332] ? __x64_sys_ioctl+0x8e/0xd0 [ 973.636339] ? dlci_ioctl_set+0x30/0x30 [ 973.636346] __x64_sys_ioctl+0x8e/0xd0 [ 973.636359] do_syscall_64+0x33/0x80 [ 973.636368] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Sequence of function call when wlan load for success case when function __ath11k_mac_register return 0: kworker/u16:3-e 2922 [001] 6696.729734: probe:ieee80211_register_hw: (ffffffffc116ae60) kworker/u16:3-e 2922 [001] 6696.730210: probe:ieee80211_if_add: (ffffffffc1185cc0) NetworkManager 826 [001] 6696.731345: probe:ethtool_get_drvinfo: (ffffffff9d8fc490) NetworkManager 826 [001] 6696.731371: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0) NetworkManager 826 [001] 6696.731639: probe:ethtool_get_drvinfo: (ffffffff9d8fc490) NetworkManager 826 [001] 6696.731653: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0) NetworkManager 826 [001] 6696.732866: probe:ethtool_get_drvinfo: (ffffffff9d8fc490) NetworkManager 826 [001] 6696.732893: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0) systemd-udevd 3850 [003] 6696.737199: probe:ethtool_get_drvinfo: (ffffffff9d8fc490) systemd-udevd 3850 [003] 6696.737226: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0) NetworkManager 826 [000] 6696.759950: probe:ethtool_get_drvinfo: (ffffffff9d8fc490) NetworkManager 826 [000] 6696.759967: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0) NetworkManager 826 [000] 6696.760057: probe:ethtool_get_drvinfo: (ffffffff9d8fc490) NetworkManager 826 [000] 6696.760062: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0) After apply this patch, kernel crash gone, and below is the test case's sequence of function call and log when wlan load with fail by function ath11k_regd_update, and __ath11k_mac_register return fail: kworker/u16:5-e 192 [001] 215.174388: probe:ieee80211_register_hw: (ffffffffc1131e60) kworker/u16:5-e 192 [000] 215.174973: probe:ieee80211_if_add: (ffffffffc114ccc0) NetworkManager 846 [001] 215.175857: probe:ethtool_get_drvinfo: (ffffffff928fc490) kworker/u16:5-e 192 [000] 215.175867: probe:ieee80211_unregister_hw: (ffffffffc1131970) NetworkManager 846 [001] 215.175880: probe:cfg80211_get_drvinfo: (ffffffffc107f8f0) NetworkManager 846 [001] 215.176105: probe:ethtool_get_drvinfo: (ffffffff928fc490) NetworkManager 846 [001] 215.176118: probe:cfg80211_get_drvinfo: (ffffffffc107f8f0) [ 215.175859] ath11k_pci 0000:05:00.0: ath11k regd update failed: -16 NetworkManager 846 [001] 215.196420: probe:ethtool_get_drvinfo: (ffffffff928fc490) NetworkManager 846 [001] 215.196430: probe:cfg80211_get_drvinfo: (ffffffffc107f8f0) [ 215.258598] ath11k_pci 0000:05:00.0: failed register the radio with mac80211: -16 [ 215.258613] ath11k_pci 0000:05:00.0: failed to create pdev core: -16 When ath11k_regd_update or ath11k_debugfs_register return fail, function ieee80211_unregister_hw of mac80211 will be called, then it will wait untill cfg80211_get_drvinfo finished, the wiphy->dev.parent is not NULL at this moment, after that, it set wiphy->dev.parent to NULL by SET_IEEE80211_DEV(ar->hw, NULL) in end of __ath11k_mac_register, so not happen kernel crash. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1608607824-16067-1-git-send-email-wgong@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>

When setting up a read or write to the OPB memory space, we must perform five or six AHB writes. The ordering of these up until the trigger write does not matter, so use writel_relaxed. The generated code goes from (Debian GCC 10.2.1-6): mov r8, r3 mcr 15, 0, sl, cr7, cr10, {4} str sl, [r6, #20] mcr 15, 0, sl, cr7, cr10, {4} str r3, [r6, #24] mcr 15, 0, sl, cr7, cr10, {4} str r1, [r6, #28] mcr 15, 0, sl, cr7, cr10, {4} str r2, [r6, #32] mcr 15, 0, sl, cr7, cr10, {4} mov r1, #1 str r1, [r6, #64] ; 0x40 mcr 15, 0, sl, cr7, cr10, {4} str r1, [r6, #4] to this: str r3, [r7, #20] str r2, [r7, #24] str r1, [r7, #28] str r3, [r7, #64] mov r8, #0 mcr 15, 0, r8, cr7, cr10, {4} str r3, [r7, #4] OpenBMC-Staging-Count: 1 Signed-off-by: Joel Stanley <joel@jms.id.au> Acked-by: Jeremy Kerr <jk@ozlabs.org> Reviewed-by: Eddie James <eajames@linux.ibm.com> Tested-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210223041737.171274-1-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>

[ Upstream commit d412137 ] The perf_buffer fails on system with offline cpus: # test_progs -t perf_buffer test_perf_buffer:PASS:nr_cpus 0 nsec test_perf_buffer:PASS:nr_on_cpus 0 nsec test_perf_buffer:PASS:skel_load 0 nsec test_perf_buffer:PASS:attach_kprobe 0 nsec test_perf_buffer:PASS:perf_buf__new 0 nsec test_perf_buffer:PASS:epoll_fd 0 nsec skipping offline CPU #24 skipping offline CPU #25 skipping offline CPU #26 skipping offline CPU #27 skipping offline CPU #28 skipping offline CPU #29 skipping offline CPU #30 skipping offline CPU #31 test_perf_buffer:PASS:perf_buffer__poll 0 nsec test_perf_buffer:PASS:seen_cpu_cnt 0 nsec test_perf_buffer:FAIL:buf_cnt got 24, expected 32 Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED Changing the test to check online cpus instead of possible. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20211021114132.8196-2-jolsa@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4224cfd ] When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed. [ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280 crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92 crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER) To prevent this scenario, we also make sure that the netdevice is present. Signed-off-by: suresh kumar <suresh2514@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 17ecd4a ] When we try to transmit an skb with metadata_dst attached (i.e. dst->dev == NULL) through xfrm interface we can hit a null pointer dereference[1] in xfrmi_xmit2() -> xfrm_lookup_with_ifid() due to the check for a loopback skb device when there's no policy which dereferences dst->dev unconditionally. Not having dst->dev can be interepreted as it not being a loopback device, so just add a check for a null dst_orig->dev. With this fix xfrm interface's Tx error counters go up as usual. [1] net-next calltrace captured via netconsole: BUG: kernel NULL pointer dereference, address: 00000000000000c0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 1 PID: 7231 Comm: ping Kdump: loaded Not tainted 5.19.0+ #24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014 RIP: 0010:xfrm_lookup_with_ifid+0x5eb/0xa60 Code: 8d 74 24 38 e8 26 a4 37 00 48 89 c1 e9 12 fc ff ff 49 63 ed 41 83 fd be 0f 85 be 01 00 00 41 be ff ff ff ff 45 31 ed 48 8b 03 <f6> 80 c0 00 00 00 08 75 0f 41 80 bc 24 19 0d 00 00 01 0f 84 1e 02 RSP: 0018:ffffb0db82c679f0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffd0db7fcad430 RCX: ffffb0db82c67a10 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb0db82c67a80 RBP: ffffb0db82c67a80 R08: ffffb0db82c67a14 R09: 0000000000000000 R10: 0000000000000000 R11: ffff8fa449667dc8 R12: ffffffff966db880 R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000 FS: 00007ff35c83f000(0000) GS:ffff8fa478480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000c0 CR3: 000000001ebb7000 CR4: 0000000000350ee0 Call Trace: <TASK> xfrmi_xmit+0xde/0x460 ? tcf_bpf_act+0x13d/0x2a0 dev_hard_start_xmit+0x72/0x1e0 __dev_queue_xmit+0x251/0xd30 ip_finish_output2+0x140/0x550 ip_push_pending_frames+0x56/0x80 raw_sendmsg+0x663/0x10a0 ? try_charge_memcg+0x3fd/0x7a0 ? __mod_memcg_lruvec_state+0x93/0x110 ? sock_sendmsg+0x30/0x40 sock_sendmsg+0x30/0x40 __sys_sendto+0xeb/0x130 ? handle_mm_fault+0xae/0x280 ? do_user_addr_fault+0x1e7/0x680 ? kvm_read_and_reset_apf_flags+0x3b/0x50 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7ff35cac1366 Code: eb 0b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89 RSP: 002b:00007fff738e4028 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007fff738e57b0 RCX: 00007ff35cac1366 RDX: 0000000000000040 RSI: 0000557164e4b450 RDI: 0000000000000003 RBP: 0000557164e4b450 R08: 00007fff738e7a2c R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 R13: 00007fff738e5770 R14: 00007fff738e4030 R15: 0000001d00000001 </TASK> Modules linked in: netconsole veth br_netfilter bridge bonding virtio_net [last unloaded: netconsole] CR2: 00000000000000c0 CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Daniel Borkmann <daniel@iogearbox.net> Fixes: 2d151d3 ("xfrm: Add possibility to set the default to block if we have no policy") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 17ecd4a ] When we try to transmit an skb with metadata_dst attached (i.e. dst->dev == NULL) through xfrm interface we can hit a null pointer dereference[1] in xfrmi_xmit2() -> xfrm_lookup_with_ifid() due to the check for a loopback skb device when there's no policy which dereferences dst->dev unconditionally. Not having dst->dev can be interepreted as it not being a loopback device, so just add a check for a null dst_orig->dev. With this fix xfrm interface's Tx error counters go up as usual. [1] net-next calltrace captured via netconsole: BUG: kernel NULL pointer dereference, address: 00000000000000c0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 1 PID: 7231 Comm: ping Kdump: loaded Not tainted 5.19.0+ openbmc#24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014 RIP: 0010:xfrm_lookup_with_ifid+0x5eb/0xa60 Code: 8d 74 24 38 e8 26 a4 37 00 48 89 c1 e9 12 fc ff ff 49 63 ed 41 83 fd be 0f 85 be 01 00 00 41 be ff ff ff ff 45 31 ed 48 8b 03 <f6> 80 c0 00 00 00 08 75 0f 41 80 bc 24 19 0d 00 00 01 0f 84 1e 02 RSP: 0018:ffffb0db82c679f0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffd0db7fcad430 RCX: ffffb0db82c67a10 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb0db82c67a80 RBP: ffffb0db82c67a80 R08: ffffb0db82c67a14 R09: 0000000000000000 R10: 0000000000000000 R11: ffff8fa449667dc8 R12: ffffffff966db880 R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000 FS: 00007ff35c83f000(0000) GS:ffff8fa478480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000c0 CR3: 000000001ebb7000 CR4: 0000000000350ee0 Call Trace: <TASK> xfrmi_xmit+0xde/0x460 ? tcf_bpf_act+0x13d/0x2a0 dev_hard_start_xmit+0x72/0x1e0 __dev_queue_xmit+0x251/0xd30 ip_finish_output2+0x140/0x550 ip_push_pending_frames+0x56/0x80 raw_sendmsg+0x663/0x10a0 ? try_charge_memcg+0x3fd/0x7a0 ? __mod_memcg_lruvec_state+0x93/0x110 ? sock_sendmsg+0x30/0x40 sock_sendmsg+0x30/0x40 __sys_sendto+0xeb/0x130 ? handle_mm_fault+0xae/0x280 ? do_user_addr_fault+0x1e7/0x680 ? kvm_read_and_reset_apf_flags+0x3b/0x50 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7ff35cac1366 Code: eb 0b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89 RSP: 002b:00007fff738e4028 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007fff738e57b0 RCX: 00007ff35cac1366 RDX: 0000000000000040 RSI: 0000557164e4b450 RDI: 0000000000000003 RBP: 0000557164e4b450 R08: 00007fff738e7a2c R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 R13: 00007fff738e5770 R14: 00007fff738e4030 R15: 0000001d00000001 </TASK> Modules linked in: netconsole veth br_netfilter bridge bonding virtio_net [last unloaded: netconsole] CR2: 00000000000000c0 CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Daniel Borkmann <daniel@iogearbox.net> Fixes: 2d151d3 ("xfrm: Add possibility to set the default to block if we have no policy") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 0b0747d upstream. The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230828221018.19471-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 3dd3841 ] profile->parent->dents[AAFS_PROF_DIR] could be NULL only if its parent is made from __create_missing_ancestors(..) and 'ent->old' is NULL in aa_replace_profiles(..). In that case, it must return an error code and the code, -ENOENT represents its state that the path of its parent is not existed yet. BUG: kernel NULL pointer dereference, address: 0000000000000030 PGD 0 P4D 0 PREEMPT SMP PTI CPU: 4 PID: 3362 Comm: apparmor_parser Not tainted 6.8.0-24-generic #24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:aafs_create.constprop.0+0x7f/0x130 Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82baac10 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007be9f22cf740(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 0000000134b08000 CR4: 00000000000006f0 Call Trace: <TASK> ? show_regs+0x6d/0x80 ? __die+0x24/0x80 ? page_fault_oops+0x99/0x1b0 ? kernelmode_fixup_or_oops+0xb2/0x140 ? __bad_area_nosemaphore+0x1a5/0x2c0 ? find_vma+0x34/0x60 ? bad_area_nosemaphore+0x16/0x30 ? do_user_addr_fault+0x2a2/0x6b0 ? exc_page_fault+0x83/0x1b0 ? asm_exc_page_fault+0x27/0x30 ? aafs_create.constprop.0+0x7f/0x130 ? aafs_create.constprop.0+0x51/0x130 __aafs_profile_mkdir+0x3d6/0x480 aa_replace_profiles+0x83f/0x1270 policy_update+0xe3/0x180 profile_load+0xbc/0x150 ? rw_verify_area+0x47/0x140 vfs_write+0x100/0x480 ? __x64_sys_openat+0x55/0xa0 ? syscall_exit_to_user_mode+0x86/0x260 ksys_write+0x73/0x100 __x64_sys_write+0x19/0x30 x64_sys_call+0x7e/0x25c0 do_syscall_64+0x7f/0x180 entry_SYSCALL_64_after_hwframe+0x78/0x80 RIP: 0033:0x7be9f211c574 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 RSP: 002b:00007ffd26f2b8c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00005d504415e200 RCX: 00007be9f211c574 RDX: 0000000000001fc1 RSI: 00005d504418bc80 RDI: 0000000000000004 RBP: 0000000000001fc1 R08: 0000000000001fc1 R09: 0000000080000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00005d504418bc80 R13: 0000000000000004 R14: 00007ffd26f2b9b0 R15: 00007ffd26f2ba30 </TASK> Modules linked in: snd_seq_dummy snd_hrtimer qrtr snd_hda_codec_generic snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device i2c_i801 snd_timer i2c_smbus qxl snd soundcore drm_ttm_helper lpc_ich ttm joydev input_leds serio_raw mac_hid binfmt_misc msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs qemu_fw_cfg ip_tables x_tables autofs4 hid_generic usbhid hid ahci libahci psmouse virtio_rng xhci_pci xhci_pci_renesas CR2: 0000000000000030 ---[ end trace 0000000000000000 ]--- RIP: 0010:aafs_create.constprop.0+0x7f/0x130 Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82baac10 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007be9f22cf740(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 0000000134b08000 CR4: 00000000000006f0 Signed-off-by: Leesoo Ahn <lsahn@ooseel.net> Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

shenki closed this Dec 1, 2015

jk-ozlabs deleted the openbmc/gpio branch May 7, 2021 04:00

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

gpio/aspeed: Use handler_data in aspeed_gpio_irq_handler. #24

gpio/aspeed: Use handler_data in aspeed_gpio_irq_handler. #24

jk-ozlabs commented Dec 1, 2015

shenki commented Dec 1, 2015

gpio/aspeed: Use handler_data in aspeed_gpio_irq_handler. #24

gpio/aspeed: Use handler_data in aspeed_gpio_irq_handler. #24

Conversation

jk-ozlabs commented Dec 1, 2015

shenki commented Dec 1, 2015