-
Notifications
You must be signed in to change notification settings - Fork 46
Packet Captures
Joe Moran edited this page Mar 20, 2021
·
160 revisions
First time adding a package? Read this how to contribute: How-to-add-a-new-packet-Page.
Occlusion Alarm packets (yeagerm)
Occlusion alarm packets 2 (yeagerm)
Occlusion alarm packets 3 (yeagerm)
- Status Packets
- Confirm
- Pod Status Request (Wedding)
- Status packets 40U in reservoir
- Status packets 33U left in reservoir
- Status Response 1D long run (Lytrix)
- Status Response with bit for event 0x14 (omni-flo)
- Status Response Expired Pod with >50U running on rileylink (Lytrix)
- All Pairing steps
- Pairing
- Pairing-02
- Pairing-03
- Pod-setup-with-known-Lot-and-TID
- Priming and Deploying New Pod (Wedding)
- Priming and Deploying New Pod (Lytrix)
- Priming and Deploying New Pod (jweismann)
- Raw capture pairing with RFcat (Lytrix)
- Pairing (ajs)
- Basal-Schedule-captures
- Set Basal schedule with 24 time slots (Lytrix)
- Differences between PDM and RL with multiple entries (AJsCGM and Lytrix)
- Differences between PDM and RL with 24 entries basal schedule (Lytrix)
- Pulse timings of setting Basal schedules to solve Phase (Lytrix)
- Enable Different Preset Basal packets
- Enable Different Preset Basal (Lytrix)
- Set Basal Examples (Lytrix)
- Set Basal Examples (Heltzel)
- Change Basal real world and weird setup (AJsCGM)
- Set Basal Examples (yeagerm)
- Basal captures 4 to 23 entries (AJsCGM)
- 1.55U/h 0.5h segment and 1.50U/h segment, moving from the first to the last half hour (Lytrix)
- 1.55U/h 1.0h segment and 1.50U/h segment, moving from the first to the last half hour (Lytrix)
-
Bolus packets
- Extended Bolus examples (Lytrix)
- Bolus extended with superimposed immediate bolus (csholmq)
- Bolus with extended delivery (Lytrix)
- Bolus with active extended bolus (Lytrix)
- Evaluating 6a Failure with long status response error
- PDM-Message-Sequence-Testing
- PDM-status-response-Testing
- Repetitive get Status Testing on Loop
- 62 Fault after repetitive get status after 1 day 19 hours
- B9 A-bit set/unset examples basal schedule
- Suspend-delivery-for-time-change,-resume-delivery-(danevans-dexdan)
- Cancel Bolus with Temp Basal active (Lytrix)
- Cancel Temp Basal (Lytrix)
- Suspend insulin delivery packets
- Suspend insulin for full 0.5 Hour then resume basal (Lytrix)
- Suspend insulin and continue after 10 seconds (Lytrix)
- Suspend Resume Capture 0.5h (Lytrix)
- Suspend Resume Capture all 0.5-2hrs (Lytrix)
- Suspend Resume Captures (ps2)
- Resume insulin delivery packets
- Change Pod now packets
- Change and activate new Pod packets (yeagerm)
- Change and activate new pod 2 (yeagerm)
- Deactivate-POD-Normally-(Lytrix)
- Deactivate-Pod-Normally-46U-left(Lytrix)
- Deactivate-POD-after-running-out-of-Insulin-(Lytrix)
- Beeps change POD (Lytrix)
- Beeps due to faulted POD + auto deactivate (jweismann)
- Flatline-Beeeeeep-POD-(Lytrix)
- Shutdown-screaming-pod-(ps2)
- Flatline triggered by Auto-off 1 hour (Lytrix)
- End date (using 1 hour before end) (Lytrix)
- Reservoir almost empty (50U) (Heltzel)
- Auto off (1H) (Lytrix)
- All possible Pod Beeps recordings (Lytrix)
- Program reminder on/off (Lytrix)
- Warning if no POD status is available within X hour (Lytrix)
- Check alarms (Lytrix)
- Change Time (Heltzel)
- Set Low Reservoir Alert (Lytrix)
- Set Pod Expiration Alert (Lytrix)
- Confirmation reminder on/off (Lytrix)