DS3231 shown as HX711 #4759

mvincm · 2018-12-29T16:42:21Z

Hello!

Describe the bug
I have compiled tasmota (6.4.1.2) for "sonoff basic" with DS3231 option enabled in "my_user_config.h"(uncomented line #define USE_DS3231). I use GIPO5 (SCL) and GPIO4 (SDA) with a little change in "sonoff_template.h":

GPIO_USER,        // GPIO04 Optional sensor 
GPIO_USER,        // GPIO05 Optional sensor

And RTC seems to work but there is some strange log about HX711 on a console and on the main page there is a label "HX711 Weight 0 kg"

00:00:00 Project sonoff Sonoff Version 6.4.1.2(sonoff)-2_4_2
00:00:00 I2C: DS3231 found at 0x68
00:00:00 WIF: Connecting to AP1 KoroFlat in mode 11N as sonoff-6333...
00:00:01 Set time from DS3231 to RTC (UTC) Sat Dec 29 16:08:41 2018, (DST) Sun Mar 25 02:00:00 2018, (STD) Sun Oct 28 03:00:00 2018
17:08:48 Write Time TO DS3231 from NTP (UTC) Sat Dec 29 16:08:48 2018, (DST) Sun Mar 25 02:00:00 2018, (STD) Sun Oct 28 03:00:00 2018
17:08:49 WIF: Connected
17:08:49 DNS: Initialized
17:08:49 HTP: Web server active on sonoff-6333.local with IP address 192.168.22.170
17:08:49 RSL: INFO1 = {"Module":"Sonoff Basic","Version":"6.4.1.2(sonoff)","FallbackTopic":"cmnd/DVES_9398BD_fb/","GroupTopic":"sonoffs"}
17:08:49 RSL: INFO2 = {"WebServerMode":"Admin","Hostname":"sonoff-6333","IPAddress":"192.168.22.170"}
17:08:49 RSL: INFO3 = {"RestartReason":"Software/System restart"}
17:08:49 RSL: RESULT = {"POWER":"OFF"}
17:08:49 RSL: POWER = OFF
17:09:00 RSL: STATE = {"Time":"2018-12-29T17:09:00","Uptime":"0T00:00:17","Vcc":3.242,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":275,"POWER":"OFF","Wifi":{"AP":1,"SSId":"KoroFlat","BSSId":"34:CE:00:63:20:41","Channel":6,"RSSI":100}}
17:09:00 RSL: SENSOR = {"Time":"2018-12-29T17:09:00","HX711":{"Weight":0}}
17:14:00 RSL: STATE = {"Time":"2018-12-29T17:14:00","Uptime":"0T00:05:17","Vcc":3.240,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":267,"POWER":"OFF","Wifi":{"AP":1,"SSId":"KoroFlat","BSSId":"34:CE:00:63:20:41","Channel":6,"RSSI":76}}
17:14:00 RSL: SENSOR = {"Time":"2018-12-29T17:14:00","HX711":{"Weight":0}}
17:18:43 APP: Serial logging disabled
17:19:00 RSL: STATE = {"Time":"2018-12-29T17:19:00","Uptime":"0T00:10:17","Vcc":3.226,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":274,"POWER":"OFF","Wifi":{"AP":1,"SSId":"KoroFlat","BSSId":"34:CE:00:63:20:41","Channel":6,"RSSI":78}}
17:19:00 RSL: SENSOR = {"Time":"2018-12-29T17:19:00","HX711":{"Weight":0}}

Something is wrong but kill me I do not know what... Compilation goes ok, RTC seems to work..

Also, make sure these boxes are checked [x] before submitting your issue - Thank you!

Searched the problem in issues and in the wiki
Hardware used : Sonoff basic R2 V1
Development/Compiler/Upload tools used : esptool
If a pre-compiled release or development binary was used, which one? : development version 6.4.1.2
You have tried latest release or development binaries? : yes
Provide the output of commandstatus 0 :

17:34:00 CMD: status 0
17:34:00 RSL: STATUS = {"Status":{"Module":1,"FriendlyName":["Sonoff"],"Topic":"sonoff","ButtonTopic":"0","Power":0,"PowerOnState":3,"LedState":1,"SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0}}
17:34:00 RSL: STATUS1 = {"StatusPRM":{"Baudrate":115200,"GroupTopic":"sonoffs","OtaUrl":"http://thehackbox.org/tasmota/release/sonoff.bin","RestartReason":"Software/System restart","Uptime":"0T00:25:17","StartupUTC":"2018-12-29T16:08:43","Sleep":50,"BootCount":12,"SaveCount":39,"SaveAddress":"F5000"}}
17:34:00 RSL: STATUS2 = {"StatusFWR":{"Version":"6.4.1.2(sonoff)","BuildDateTime":"2018-12-29T16:26:23","Boot":31,"Core":"2_4_2","SDK":"2.2.1(cfd48f3)"}}
17:34:00 RSL: STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["KoroFlat",""],"TelePeriod":300,"SetOption":["00008001","558180C0","00000000"]}}
17:34:00 RSL: STATUS4 = {"StatusMEM":{"ProgramSize":522,"Free":480,"Heap":24,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"146085","FlashMode":3,"Features":["00000809","0FDAE794","240383A0","23B617CE","00003FC0"]}}
17:34:00 RSL: STATUS5 = {"StatusNET":{"Hostname":"sonoff-6333","IPAddress":"192.168.22.170","Gateway":"192.168.22.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.22.1","Mac":"84:F3:EB:93:98:BD","Webserver":2,"WifiConfig":4}}
17:34:00 RSL: STATUS7 = {"StatusTIM":{"UTC":"Sat Dec 29 16:34:00 2018","Local":"Sat Dec 29 17:34:00 2018","StartDST":"Sun Mar 25 02:00:00 2018","EndDST":"Sun Oct 28 03:00:00 2018","Timezone":"+01:00","Sunrise":"08:43","Sunset":"17:00"}}
17:34:00 RSL: STATUS10 = {"StatusSNS":{"Time":"2018-12-29T17:34:00","HX711":{"Weight":0}}}
17:34:00 RSL: STATUS11 = {"StatusSTS":{"Time":"2018-12-29T17:34:00","Uptime":"0T00:25:17","Vcc":3.162,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":259,"POWER":"OFF","Wifi":{"AP":1,"SSId":"KoroFlat","BSSId":"34:CE:00:63:20:41","Channel":6,"RSSI":92}}}

To Reproduce
As described beyond

Expected behavior
No information about HX711 and maybe RTC time displayed on the main page.

Best regards,
MvincM

The text was updated successfully, but these errors were encountered:

Jason2866 · 2018-12-29T17:05:36Z

Your change in sonoff_template.h is probably wrong.

mvincm · 2018-12-29T17:31:35Z

It was one simple change. Nothing to do with HX711. Take a look:

Original file:

// Default module settings
const mytmplt kModules[MAXMODULE] PROGMEM = {
  { "Sonoff Basic",    // Sonoff Basic (ESP8266)
     GPIO_KEY1,        // GPIO00 Button
     GPIO_USER,        // GPIO01 Serial RXD and Optional sensor
     GPIO_USER,        // GPIO02 Only available on newer Sonoff Basic R2 V1
     GPIO_USER,        // GPIO03 Serial TXD and Optional sensor
     GPIO_USER,        // GPIO04 Optional sensor
     0,                // GPIO05
     0,                // GPIO06 (SD_CLK   Flash)
     0,                // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
     0,                // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
     0,                // GPIO09 (SD_DATA2 Flash QIO)
     0,                // GPIO10 (SD_DATA3 Flash QIO)
     0,                // GPIO11 (SD_CMD   Flash)
     GPIO_REL1,        // GPIO12 Red Led and Relay (0 = Off, 1 = On)
     GPIO_LED1_INV,    // GPIO13 Green Led (0 = On, 1 = Off)
     GPIO_USER,        // GPIO14 Optional sensor
     0,                // GPIO15
     0,                // GPIO16
     0                 // ADC0 Analog input
  },

Changed file:

const mytmplt kModules[MAXMODULE] PROGMEM = {
  { "Sonoff Basic",    // Sonoff Basic (ESP8266)
     GPIO_KEY1,        // GPIO00 Button
     GPIO_USER,        // GPIO01 Serial RXD and Optional sensor
     GPIO_USER,        // GPIO02 Only available on newer Sonoff Basic R2 V1
     GPIO_USER,        // GPIO03 Serial TXD and Optional sensor
     GPIO_USER,        // GPIO04 Optional sensor
     GPIO_USER,        // GPIO05 Optional sensor
     0,                // GPIO06 (SD_CLK   Flash)
     0,                // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
     0,                // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
     0,                // GPIO09 (SD_DATA2 Flash QIO)
     0,                // GPIO10 (SD_DATA3 Flash QIO)
     0,                // GPIO11 (SD_CMD   Flash)
     GPIO_REL1,        // GPIO12 Red Led and Relay (0 = Off, 1 = On)
     GPIO_LED1_INV,    // GPIO13 Green Led (0 = On, 1 = Off)
     GPIO_USER,        // GPIO14 Optional sensor
     0,                // GPIO15
     0,                // GPIO16
     0                 // ADC0 Analog input
  },

ascillato2 · 2018-12-30T01:32:46Z

Hi,

If you are not using the HX711 sensor, please, just disable it in my_user_config.h file, commenting the line #define USE_HX711 like //#define USE_HX711

Thanks

ascillato2 · 2018-12-30T01:49:52Z

Have you defined the HX711 pins in the GPIO configuration ?

If I don't define those pins I don't have any readings from HX711.

mvincm · 2018-12-30T08:46:27Z

Hello,

About "#define USE_HX711 like //#define USE_HX711". I will try it today and it should works (theoretically) but I'm afraid that there is some bug which could drain CPU/power (by not necessary readings/events).

I don't set up any HX171 sensors (thru web gui or thru my_user_config.h/sonoff_template.h file). The second observation is when I disconnect DS3231 those strange HX711 readings despair. So maybe it is problem with wrong I2C setup... but DS3231 works just fine.

Jason2866 · 2018-12-30T12:35:06Z

@ascillato2
I can confirm it is a bug. If HX711 support is enabled there is HX711 on main page displayed....

13:32:07 MQT: Connected
13:32:07 MQT: tele/sonoff-1585B3B3/LWT = Online (retained)
13:32:07 MQT: cmnd/sonoff-1585B3B3/POWER = 
13:32:07 MQT: tele/sonoff-1585B3B3/INFO1 = {"Module":"Generic","Version":"6.4.1.3(sonoff)","FallbackTopic":"cmnd/sonoff-1585B3B3_fb/","GroupTopic":"sonoffs"}
13:32:07 MQT: tele/sonoff-1585B3B3/INFO2 = {"WebServerMode":"Admin","Hostname":"sonoff-1585B3B3-1459","IPAddress":"192.168.2.149"}
13:32:07 MQT: tele/sonoff-1585B3B3/INFO3 = {"RestartReason":"External System"}
13:32:07 Write Time TO DS3231 from NTP (UTC) Sun Dec 30 12:32:07 2018, (DST) Sun Mar 25 02:00:00 2018, (STD) Sun Oct 28 03:00:00 2018
13:32:08 UPP: Multicast (re)joined
13:32:15 MQT: tele/sonoff-1585B3B3/STATE = {"Time":"2018-12-30T13:32:15","Uptime":"0T00:00:15","Vcc":3.039,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":1204,"Wifi":{"AP":1,"SSId":"Jason_Home_WLAN","BSSId":"00:A0:57:2A:BD:19","Channel":9,"RSSI":100}}
13:32:15 MQT: tele/sonoff-1585B3B3/SENSOR = {"Time":"2018-12-30T13:32:15","HX711":{"Weight":0}}
13:36:10 CMD: i2cscan
13:36:10 MQT: stat/sonoff-1585B3B3/RESULT = {"I2CScan":"Device(s) found at 0x68"}

arendst · 2018-12-30T13:05:17Z

I will investigate

Fix DS3231 driver breaking function chain (#4759)

arendst · 2018-12-30T14:53:36Z

Caused by DS3231 breaking chain of functions.

Repaired and should be fine now.

Jason2866 · 2018-12-30T16:56:22Z

@arendst Thank you, can confirm works correct now.
@mvincm Thx for finding a bug, please close the issue.

mvincm · 2018-12-30T16:58:11Z

Yeep!! It works just fine! Thx for quick response and support!

@arendst

* PS_16_DZ: GPIO13 => LED1 * PS_16_DZ: cleanup code * Add Command CalcRes * Update settings.ino * Update decode-config.py * Add SetOption59 info Add SetOption59 info * decode-config.py: add 6.3.0.11 to .14 settings * Add dynamic buffer space Make serial buffer space reservation dynamic * Add dynamic buffer space Add dynamic buffer space * Fix dynamic buffer handling Fix dynamic buffer handling * Move static to dynamic buffers * Add support for SM Smart Wifi Dimmer PS-16-DZ (arendst#4465) * Move some static (serial) buffers to dynamic buffers * Prep for Software SPI Prep for Software SPI used by some displays * PS_16_DZ: only update brightness if it actually changed * PS_16_DZ: reduce buffer-size and actually check for overflow * PS_16_DZ: optimize for size * PS_16_DZ: further optimization * PS_16_DZ: leave space for trailing 0-byte * Hass: Restart if topic is changed * PS_16_DZ: cleanup * Fix possible overflow situation Fix possible overflow situation * Small improvements to Hass MQTT discovery * Add support for Teckin US Add support for Teckin US Wifi Smart Switch with Energy Monitoring (arendst#4481) * Update display and epaper drivers Update display and epaper drivers * switch to using NewPing lib directly for sr04 add NewPing-1.9.1 lib * Housekeeping * Upd settings.ino - set sleep=0 when SetOption36>0 Update settings.ino - set sleep=0 when SetOption36>0 * Prevent sleep and SetOption36 being used concurrently Prevent sleep and SetOption36 being used concurrently * Fix sleep->SetOption36 transition * Update fr-FR.h Synced with changes since v6.2.1.7 * Merge sleep command * Bump version to 0x0603000F Bump version to 0x0603000F to make sure new sleep command takes effect on 50 as default for upgrades where sleep is < 50. * Update support_wifi.ino * 6.3.0.15 Update dynamic sleep 6.3.0.15 20181201 * Removed command SetOption36 (arendst#4497) * Add command SetOption60 0/1 to select dynamic sleep (0) or sleep (1) (arendst#4497) * Update with dynamic sleep flag * Added Support for ButtonN and SwitchN * RULES: Added BREAK as an alternative ENDON RULES: Added BREAK as an alternative ENDON that will stop the execution of the following rules. If a rule that ends with BREAK, is triggered, then the following rules of that set will not be executed. This is useful for cases like: arendst#4477 * Update xsns_22_sr04.ino * RULES: Added BREAK as an alternative ENDON * Delete duplicated min and max functions * Update README.md * Update _changelog.ino * Further improve Hass auto discovery * Add dummy soft_spi_flg to satisfy compiler @arendst Just adding this, for now, to satisfy the compiler until you get time to merge the rest of the Software SPI support. * decode-config.py: add new settings - add 6.3.0.15 setting change - adapt 6.3.0.13 setting change * Add GPIO2 for Sonoff Basic Template Add GPIO2 for Sonoff Basic Template * Add support for GPIO02 for newer Sonoff Basic Add support for GPIO02 for newer Sonoff Basic * Fix Compilation issue with STAGE Core Now the Stage core has the the same STR macro defined in sonoff.h. * Create RF-Bridge-EFM8BB1-20181127.hex ignore RF pulses < 100µs, increased uart RX buffer -> stopp red led flashing * Announce switches * Final fix compile error (arendst#4509) Final fix soft_spi_flg compile error (arendst#4509) * Fix logic for ON/OFF vs TOGGLE * Initial translation to Swedish * Added Key to select Swedish Translation * Added Swedish to Precompiled bins * Added missing " * Matched the order of days with Tasmota Timers * Update platformio.ini Support for enable / disable exceptions code in firmware for esp8266 core 2.5.0 (stage) or up * localization for Polish - KNX, timers, etc. * Add Domoticz Selector for Fanspeed Add support for iFan02 Fanspeed in Domoticz using a selector (arendst#4517) * Update sonoff.ino * 6.3.0.16 - Bump version 6.3.0.16 20181201 * Add support for iFan02 Fanspeed in Domoticz using a selector (arendst#4517) * Add Announce Switches to MQTT Discovery (arendst#4531) * Fix Domoticz Fanspeed Fix Domoticz Fanspeed * MCP230xx - Add Interrupt Retain * MCP230xx driver - add interrupt retention MCP230xx driver - add interrupt retention over teleperiod. * Fix HASS discovery of switches * Announce RGBW light, add 'White' command * Enabled forced local operation when button- or switchtopic is set * Update Hass discovery * v2.1.0012 decode-config.py: add new settings - add 6.3.0.16 setting change * decode-config.py: add new settings - add 6.3.0.16 setting change * Fix reversed logic when announcing buttons / switches * add DMP mode to MPU-6050 * fix compile issue on ESP8266 * Clean and shrink lights Clean and shrink lights * Add support for device registry * Update my_user_config.h * Fix Warning in Platformio if building MPU and KNX together * USE_MPU6050_DMP moved to my_user_config.h * USE_MPU6050_DMP moved to my_user_config.h * Corrected Domoticz Temp published from MPU6050 * decode-config.py: add new settings - add SetOption61 from PR arendst#4562 * Update my_user_config.h * Fix language file Fix language file * 6.3.0.17 Add features 6.3.0.17 20181211 * Add support for TheoV2 sensors as documented on https://sidweb.nl * Add support for SDM220 (arendst#3610) * Enhance support for MPU6050 using DMP (arendst#4581) * add manzuko "power strip" * Add more support * Add support for decoding Theo V2 sensors as documented on https://sidweb.nl using 434MHz RF sensor receiver * Add support for decoding Alecto V2 sensors like ACH2010, WS3000 and DKW2012 using 868MHz RF sensor receiver * Add support for Manzoku Power Strip (arendst#4590) * Updated Spanish Translation * Update de-DE.h * More tweak of Hass switch/button * Update fr-FR.h Added SDM220 new strings * Update fr-FR.h SDM220 strings reworked to fit in the space available * initial work on range-support * mqtt messages updated * Publish state message when changing effect * decode-config.py: Fix `@v` filename template (arendst#4609) - fix restore filename auto extension * add debug code to show final command sequence * correcting memcpy calls * Add TheoV2 sensor source Add TheoV2 sensor source and information used with Rf Sensor * Add LwIP 2 no features (Low Flash) * Fix ArduinoOTA for Core 2.5.0 (fix is backwards compatible) arendst#4619 * Fix ArduinoOTA for Core 2.5.0 Fix ArduinoOTA for Core 2.5.0 * Fix HomeAssistant Temp Sensor AutoDiscovery arendst#4627 * New 2.5.0-2 toolchain does not like uncast bitwise The new toolchain (2.5.0-2) used from core 2.5.0 does not want bitwise operations to be performed on non-integer variables so we cast the double used in send_2byte_float() to a (long) as it should be. * Fix NewPing-1.9.1 library.properties Fix NewPing-1.9.1 library.properties to avoid compiler warning about possibly not supporting ESP8266 whereas we know now that it does. This causes the compiler warning (which may alarm some users unnecessarily) that NewPing claims to run on avr and stm32. * Updates for release 6.4.0 Updates for release 6.4.0 * Prep for release Prep for release * Updates for release 6.4.0 Updates for release 6.4.0 * Updates for release 6.4.0 Updates for release 6.4.0 * Updates for release 6.4.0 Updates for release 6.4.0 * Prep for release Prep for release * Updates for release 6.4.0 Updates for release 6.4.0 * Updates for release 6.4.0 Updates for release 6.4.0 * Prep for merge * 6.4.0.1 New dev release * Removing duplicate entrys Options for core 2.5.0 where duplicated * Update README.md * Create boards.txt * Create platform.txt * No exceptions * it-IT language updated * option for firmware directory added * Ease selecting core versions Ease selecting core versions by grouping core parameters together. Select core version in group [core_active] * webserver: swap index and name in module configuration * Tune driver RF Sensor - Free memory when driver RF Sensor is compiled but not used. - Fix possible buffer overflow exceptions - Add rule and hardware info to source * introduce new api-call for dimmer-devices * SerialLog: output CR + LF instead of just LF * Update linker files Update linker files to released linker files for coe 2.4.2 and up * Add sk-SK language * Update bg-BG.h * Add support for AZ-Instrument 7798 CO2 meter/datalogger. * Add support for AZ-Instrument 7798 CO2 meter/datalogger. * Revert platformio.ini and my_user_config to original version, adding line for new sensor but leaving it commented out. * Include changes from original into sonoff/language/bg-BG.h * Updated from originals: platformio.ini, sonoff/my_user_config.h. * Revert to original RELEASENOTES.md. * Add void to functions without parameters * Fix temperature conversion Fix temperature conversion to still use ConvertTemp() even if meter sends the value in F * Add support for AZ-Instrument 7798 CO2 Add support for AZ-Instrument 7798 CO2 meter/datalogger * pressure unit of measure reporting Added a dedicated pressure sensor management to report back as pressure sensor and not fallback as a generic sensor in HA autodiscovery process * add missing units of measurements for energy * removed some errors from copy pasting.. * add empty unit of measurement for any sensors * Added option for checking mqtt tls against root ca Signed-off-by: Frank Meies <19324766+fmeies@users.noreply.github.com> * Change RAM usage BMP/BME Change RAM usage BMP/BME I2C sensors * Update Arduino IDE core 2.5.0 files Update Arduino IDE core 2.5.0 files * Fix wifi strongest signal detection Fix wifi strongest signal detection (arendst#4704) * 6.4.0.2 Fix possible dtostrf bos 6.4.0.2 20181221 * Fix possible dtostrf buffer overflows by increasing buffers * Still need patched PWM for core 2.5.0 Still need patched PWM for core 2.5.0 * Check for core version when enabling tls ca cert Signed-off-by: Frank Meies <19324766+fmeies@users.noreply.github.com> * Check for core version when enabling tls ca cert, changed names of defines Signed-off-by: Frank Meies <19324766+fmeies@users.noreply.github.com> * Remove SetOption55 (hass_short_discovery_msg) * Rename HASS discovery string constants * Remove Alexa message "this value is outside the range of the device" * 6.4.0.3 Hass and Alexa fixes 6.4.0.3 20181222 * Change Hass discovery to short MQTT messages as used by Hass 0.81 and up (arendst#4711) * Change FallbackTopic detection (arendst#4706) * Add define WIFI_SOFT_AP_CHANNEL in my_user_config.h to set Soft Access Point Channel number between 1 and 13 as used by Wifi Manager web GUI (arendst#4673) * Fix Alexa "this value is outside the range of the device". Needs power cycle and Alexa deletion/discovery cycle. (arendst#3159, arendst#4712) * Add optional TLS_CA_CERT Add define USE_MQTT_TLS_CA_CERT for checking MQTT TLS against root ca using Let's Encrypt cert from sonoff_letsencrypt.h - not supported with core 2.3.0 (arendst#4703) * decode-config.py: adapt settings change - remove SetOption55 (hass_short_discovery_msg) * Change FallbackTopic Change FallbackTopic from cmnd/<mqttclient>/ to cmnd/<mqttclient>_fb/ to discriminate from Topic (arendst#1528) * PS_16_DZ: fix broken if-statement * Change MQTT GUI password handling Change MQTT GUI password handling (arendst#4723) * Release 6.4.1 * 6.4.1.1 Fix most compiler warnings 6.4.1.1 20181224 * Fix most compiler warnings * Fix compiler warning Fix compiler warning * Change switch debounce Change switch input detection by optimizing switch debounce (arendst#4724) * Add INPUT_PULLUP option for single DS18B20 * Add variable %timestamp% to be used in rules This PR adds a new variable %timestamp% to be used in a rule to allow the user to include the Time Stamp as Tasmota has for Status, Sensors, etc, for example: Command: publish stat/topic/sensor {"Time":"%timestamp%","mysensor":"%var1%"} Output: {"Time":"2018-12-27T12:52:57","mysensor":"1"} (arendst#4734) * 6.4.1.2 Rewrite Switch driver 6.4.1.2 20181228 * Change switch driver making it modular and introduce input filter (arendst#4665, arendst#4724) * Add define DS18B20_INTERNAL_PULLUP to select internal input pullup when only one DS18B20 sensor is connected eliminating external resistor (arendst#4738) * Add variable %timestamp% to rules (arendst#4749) * Update platformio.ini with stage Update platformio.ini with latest stage option * Prep for template tuning * 6.4.1.3 Change sonoff_template.h 6.4.1.3 20181229 * Change sonoff_template.h module lay-out by removing non-configurable GPIOs * Fix Typo in Spanish Translation * Fix MGC3130/AZ7798 compile error * Add debugging options to Switch Add more debugging options to Switch using SwitchDebounce * Fix DS3231 driver Fix DS3231 driver breaking function chain (arendst#4759) * Disable unused feature * Revert "Disable unused feature" This reverts commit 8fe61f6. * Add test for result usage * Add tests for result

@arendst

* PS_16_DZ: GPIO13 => LED1 * PS_16_DZ: cleanup code * Add Command CalcRes * Update settings.ino * Update decode-config.py * Add SetOption59 info Add SetOption59 info * decode-config.py: add 6.3.0.11 to .14 settings * Add dynamic buffer space Make serial buffer space reservation dynamic * Add dynamic buffer space Add dynamic buffer space * Fix dynamic buffer handling Fix dynamic buffer handling * Move static to dynamic buffers * Add support for SM Smart Wifi Dimmer PS-16-DZ (arendst#4465) * Move some static (serial) buffers to dynamic buffers * Prep for Software SPI Prep for Software SPI used by some displays * PS_16_DZ: only update brightness if it actually changed * PS_16_DZ: reduce buffer-size and actually check for overflow * PS_16_DZ: optimize for size * PS_16_DZ: further optimization * PS_16_DZ: leave space for trailing 0-byte * Hass: Restart if topic is changed * PS_16_DZ: cleanup * Fix possible overflow situation Fix possible overflow situation * Small improvements to Hass MQTT discovery * Add support for Teckin US Add support for Teckin US Wifi Smart Switch with Energy Monitoring (arendst#4481) * Update display and epaper drivers Update display and epaper drivers * switch to using NewPing lib directly for sr04 add NewPing-1.9.1 lib * Housekeeping * Upd settings.ino - set sleep=0 when SetOption36>0 Update settings.ino - set sleep=0 when SetOption36>0 * Prevent sleep and SetOption36 being used concurrently Prevent sleep and SetOption36 being used concurrently * Fix sleep->SetOption36 transition * Update fr-FR.h Synced with changes since v6.2.1.7 * Merge sleep command * Bump version to 0x0603000F Bump version to 0x0603000F to make sure new sleep command takes effect on 50 as default for upgrades where sleep is < 50. * Update support_wifi.ino * 6.3.0.15 Update dynamic sleep 6.3.0.15 20181201 * Removed command SetOption36 (arendst#4497) * Add command SetOption60 0/1 to select dynamic sleep (0) or sleep (1) (arendst#4497) * Update with dynamic sleep flag * Added Support for ButtonN and SwitchN * RULES: Added BREAK as an alternative ENDON RULES: Added BREAK as an alternative ENDON that will stop the execution of the following rules. If a rule that ends with BREAK, is triggered, then the following rules of that set will not be executed. This is useful for cases like: arendst#4477 * Update xsns_22_sr04.ino * RULES: Added BREAK as an alternative ENDON * Delete duplicated min and max functions * Update README.md * Update _changelog.ino * Further improve Hass auto discovery * Add dummy soft_spi_flg to satisfy compiler @arendst Just adding this, for now, to satisfy the compiler until you get time to merge the rest of the Software SPI support. * decode-config.py: add new settings - add 6.3.0.15 setting change - adapt 6.3.0.13 setting change * Add GPIO2 for Sonoff Basic Template Add GPIO2 for Sonoff Basic Template * Add support for GPIO02 for newer Sonoff Basic Add support for GPIO02 for newer Sonoff Basic * Fix Compilation issue with STAGE Core Now the Stage core has the the same STR macro defined in sonoff.h. * Create RF-Bridge-EFM8BB1-20181127.hex ignore RF pulses < 100µs, increased uart RX buffer -> stopp red led flashing * Announce switches * Final fix compile error (arendst#4509) Final fix soft_spi_flg compile error (arendst#4509) * Fix logic for ON/OFF vs TOGGLE * Initial translation to Swedish * Added Key to select Swedish Translation * Added Swedish to Precompiled bins * Added missing " * Matched the order of days with Tasmota Timers * Update platformio.ini Support for enable / disable exceptions code in firmware for esp8266 core 2.5.0 (stage) or up * localization for Polish - KNX, timers, etc. * Add Domoticz Selector for Fanspeed Add support for iFan02 Fanspeed in Domoticz using a selector (arendst#4517) * Update sonoff.ino * 6.3.0.16 - Bump version 6.3.0.16 20181201 * Add support for iFan02 Fanspeed in Domoticz using a selector (arendst#4517) * Add Announce Switches to MQTT Discovery (arendst#4531) * Fix Domoticz Fanspeed Fix Domoticz Fanspeed * MCP230xx - Add Interrupt Retain * MCP230xx driver - add interrupt retention MCP230xx driver - add interrupt retention over teleperiod. * Fix HASS discovery of switches * Announce RGBW light, add 'White' command * Enabled forced local operation when button- or switchtopic is set * Update Hass discovery * v2.1.0012 decode-config.py: add new settings - add 6.3.0.16 setting change * decode-config.py: add new settings - add 6.3.0.16 setting change * Fix reversed logic when announcing buttons / switches * add DMP mode to MPU-6050 * fix compile issue on ESP8266 * Clean and shrink lights Clean and shrink lights * Add support for device registry * Update my_user_config.h * Fix Warning in Platformio if building MPU and KNX together * USE_MPU6050_DMP moved to my_user_config.h * USE_MPU6050_DMP moved to my_user_config.h * Corrected Domoticz Temp published from MPU6050 * decode-config.py: add new settings - add SetOption61 from PR arendst#4562 * Update my_user_config.h * Fix language file Fix language file * 6.3.0.17 Add features 6.3.0.17 20181211 * Add support for TheoV2 sensors as documented on https://sidweb.nl * Add support for SDM220 (arendst#3610) * Enhance support for MPU6050 using DMP (arendst#4581) * add manzuko "power strip" * Add more support * Add support for decoding Theo V2 sensors as documented on https://sidweb.nl using 434MHz RF sensor receiver * Add support for decoding Alecto V2 sensors like ACH2010, WS3000 and DKW2012 using 868MHz RF sensor receiver * Add support for Manzoku Power Strip (arendst#4590) * Updated Spanish Translation * Update de-DE.h * More tweak of Hass switch/button * Update fr-FR.h Added SDM220 new strings * Update fr-FR.h SDM220 strings reworked to fit in the space available * initial work on range-support * mqtt messages updated * Publish state message when changing effect * decode-config.py: Fix `@v` filename template (arendst#4609) - fix restore filename auto extension * add debug code to show final command sequence * correcting memcpy calls * Add TheoV2 sensor source Add TheoV2 sensor source and information used with Rf Sensor * Add LwIP 2 no features (Low Flash) * Fix ArduinoOTA for Core 2.5.0 (fix is backwards compatible) arendst#4619 * Fix ArduinoOTA for Core 2.5.0 Fix ArduinoOTA for Core 2.5.0 * Fix HomeAssistant Temp Sensor AutoDiscovery arendst#4627 * New 2.5.0-2 toolchain does not like uncast bitwise The new toolchain (2.5.0-2) used from core 2.5.0 does not want bitwise operations to be performed on non-integer variables so we cast the double used in send_2byte_float() to a (long) as it should be. * Fix NewPing-1.9.1 library.properties Fix NewPing-1.9.1 library.properties to avoid compiler warning about possibly not supporting ESP8266 whereas we know now that it does. This causes the compiler warning (which may alarm some users unnecessarily) that NewPing claims to run on avr and stm32. * Updates for release 6.4.0 Updates for release 6.4.0 * Prep for release Prep for release * Updates for release 6.4.0 Updates for release 6.4.0 * Updates for release 6.4.0 Updates for release 6.4.0 * Updates for release 6.4.0 Updates for release 6.4.0 * Prep for release Prep for release * Updates for release 6.4.0 Updates for release 6.4.0 * Updates for release 6.4.0 Updates for release 6.4.0 * Prep for merge * 6.4.0.1 New dev release * Removing duplicate entrys Options for core 2.5.0 where duplicated * Update README.md * Create boards.txt * Create platform.txt * No exceptions * it-IT language updated * option for firmware directory added * Ease selecting core versions Ease selecting core versions by grouping core parameters together. Select core version in group [core_active] * webserver: swap index and name in module configuration * Tune driver RF Sensor - Free memory when driver RF Sensor is compiled but not used. - Fix possible buffer overflow exceptions - Add rule and hardware info to source * introduce new api-call for dimmer-devices * SerialLog: output CR + LF instead of just LF * Update linker files Update linker files to released linker files for coe 2.4.2 and up * Add sk-SK language * Update bg-BG.h * Add support for AZ-Instrument 7798 CO2 meter/datalogger. * Add support for AZ-Instrument 7798 CO2 meter/datalogger. * Revert platformio.ini and my_user_config to original version, adding line for new sensor but leaving it commented out. * Include changes from original into sonoff/language/bg-BG.h * Updated from originals: platformio.ini, sonoff/my_user_config.h. * Revert to original RELEASENOTES.md. * Add void to functions without parameters * Fix temperature conversion Fix temperature conversion to still use ConvertTemp() even if meter sends the value in F * Add support for AZ-Instrument 7798 CO2 Add support for AZ-Instrument 7798 CO2 meter/datalogger * pressure unit of measure reporting Added a dedicated pressure sensor management to report back as pressure sensor and not fallback as a generic sensor in HA autodiscovery process * add missing units of measurements for energy * removed some errors from copy pasting.. * add empty unit of measurement for any sensors * Added option for checking mqtt tls against root ca Signed-off-by: Frank Meies <19324766+fmeies@users.noreply.github.com> * Change RAM usage BMP/BME Change RAM usage BMP/BME I2C sensors * Update Arduino IDE core 2.5.0 files Update Arduino IDE core 2.5.0 files * Fix wifi strongest signal detection Fix wifi strongest signal detection (arendst#4704) * 6.4.0.2 Fix possible dtostrf bos 6.4.0.2 20181221 * Fix possible dtostrf buffer overflows by increasing buffers * Still need patched PWM for core 2.5.0 Still need patched PWM for core 2.5.0 * Check for core version when enabling tls ca cert Signed-off-by: Frank Meies <19324766+fmeies@users.noreply.github.com> * Check for core version when enabling tls ca cert, changed names of defines Signed-off-by: Frank Meies <19324766+fmeies@users.noreply.github.com> * Remove SetOption55 (hass_short_discovery_msg) * Rename HASS discovery string constants * Remove Alexa message "this value is outside the range of the device" * 6.4.0.3 Hass and Alexa fixes 6.4.0.3 20181222 * Change Hass discovery to short MQTT messages as used by Hass 0.81 and up (arendst#4711) * Change FallbackTopic detection (arendst#4706) * Add define WIFI_SOFT_AP_CHANNEL in my_user_config.h to set Soft Access Point Channel number between 1 and 13 as used by Wifi Manager web GUI (arendst#4673) * Fix Alexa "this value is outside the range of the device". Needs power cycle and Alexa deletion/discovery cycle. (arendst#3159, arendst#4712) * Add optional TLS_CA_CERT Add define USE_MQTT_TLS_CA_CERT for checking MQTT TLS against root ca using Let's Encrypt cert from sonoff_letsencrypt.h - not supported with core 2.3.0 (arendst#4703) * decode-config.py: adapt settings change - remove SetOption55 (hass_short_discovery_msg) * Change FallbackTopic Change FallbackTopic from cmnd/<mqttclient>/ to cmnd/<mqttclient>_fb/ to discriminate from Topic (arendst#1528) * PS_16_DZ: fix broken if-statement * Change MQTT GUI password handling Change MQTT GUI password handling (arendst#4723) * Release 6.4.1 * 6.4.1.1 Fix most compiler warnings 6.4.1.1 20181224 * Fix most compiler warnings * Fix compiler warning Fix compiler warning * Change switch debounce Change switch input detection by optimizing switch debounce (arendst#4724) * Add INPUT_PULLUP option for single DS18B20 * Add variable %timestamp% to be used in rules This PR adds a new variable %timestamp% to be used in a rule to allow the user to include the Time Stamp as Tasmota has for Status, Sensors, etc, for example: Command: publish stat/topic/sensor {"Time":"%timestamp%","mysensor":"%var1%"} Output: {"Time":"2018-12-27T12:52:57","mysensor":"1"} (arendst#4734) * 6.4.1.2 Rewrite Switch driver 6.4.1.2 20181228 * Change switch driver making it modular and introduce input filter (arendst#4665, arendst#4724) * Add define DS18B20_INTERNAL_PULLUP to select internal input pullup when only one DS18B20 sensor is connected eliminating external resistor (arendst#4738) * Add variable %timestamp% to rules (arendst#4749) * Update platformio.ini with stage Update platformio.ini with latest stage option * Prep for template tuning * 6.4.1.3 Change sonoff_template.h 6.4.1.3 20181229 * Change sonoff_template.h module lay-out by removing non-configurable GPIOs * Fix Typo in Spanish Translation * Fix MGC3130/AZ7798 compile error * Add debugging options to Switch Add more debugging options to Switch using SwitchDebounce * Fix DS3231 driver Fix DS3231 driver breaking function chain (arendst#4759) * Disable unused feature * Revert "Disable unused feature" This reverts commit 8fe61f6. * Add test for result usage * Add tests for result

@arendst

* PS_16_DZ: GPIO13 => LED1 * PS_16_DZ: cleanup code * Add Command CalcRes * Update settings.ino * Update decode-config.py * Add SetOption59 info Add SetOption59 info * decode-config.py: add 6.3.0.11 to .14 settings * Add dynamic buffer space Make serial buffer space reservation dynamic * Add dynamic buffer space Add dynamic buffer space * Fix dynamic buffer handling Fix dynamic buffer handling * Move static to dynamic buffers * Add support for SM Smart Wifi Dimmer PS-16-DZ (arendst#4465) * Move some static (serial) buffers to dynamic buffers * Prep for Software SPI Prep for Software SPI used by some displays * PS_16_DZ: only update brightness if it actually changed * PS_16_DZ: reduce buffer-size and actually check for overflow * PS_16_DZ: optimize for size * PS_16_DZ: further optimization * PS_16_DZ: leave space for trailing 0-byte * Hass: Restart if topic is changed * PS_16_DZ: cleanup * Fix possible overflow situation Fix possible overflow situation * Small improvements to Hass MQTT discovery * Add support for Teckin US Add support for Teckin US Wifi Smart Switch with Energy Monitoring (arendst#4481) * Update display and epaper drivers Update display and epaper drivers * switch to using NewPing lib directly for sr04 add NewPing-1.9.1 lib * Housekeeping * Upd settings.ino - set sleep=0 when SetOption36>0 Update settings.ino - set sleep=0 when SetOption36>0 * Prevent sleep and SetOption36 being used concurrently Prevent sleep and SetOption36 being used concurrently * Fix sleep->SetOption36 transition * Update fr-FR.h Synced with changes since v6.2.1.7 * Merge sleep command * Bump version to 0x0603000F Bump version to 0x0603000F to make sure new sleep command takes effect on 50 as default for upgrades where sleep is < 50. * Update support_wifi.ino * 6.3.0.15 Update dynamic sleep 6.3.0.15 20181201 * Removed command SetOption36 (arendst#4497) * Add command SetOption60 0/1 to select dynamic sleep (0) or sleep (1) (arendst#4497) * Update with dynamic sleep flag * Added Support for ButtonN and SwitchN * RULES: Added BREAK as an alternative ENDON RULES: Added BREAK as an alternative ENDON that will stop the execution of the following rules. If a rule that ends with BREAK, is triggered, then the following rules of that set will not be executed. This is useful for cases like: arendst#4477 * Update xsns_22_sr04.ino * RULES: Added BREAK as an alternative ENDON * Delete duplicated min and max functions * Update README.md * Update _changelog.ino * Further improve Hass auto discovery * Add dummy soft_spi_flg to satisfy compiler @arendst Just adding this, for now, to satisfy the compiler until you get time to merge the rest of the Software SPI support. * decode-config.py: add new settings - add 6.3.0.15 setting change - adapt 6.3.0.13 setting change * Add GPIO2 for Sonoff Basic Template Add GPIO2 for Sonoff Basic Template * Add support for GPIO02 for newer Sonoff Basic Add support for GPIO02 for newer Sonoff Basic * Fix Compilation issue with STAGE Core Now the Stage core has the the same STR macro defined in sonoff.h. * Create RF-Bridge-EFM8BB1-20181127.hex ignore RF pulses < 100µs, increased uart RX buffer -> stopp red led flashing * Announce switches * Final fix compile error (arendst#4509) Final fix soft_spi_flg compile error (arendst#4509) * Fix logic for ON/OFF vs TOGGLE * Initial translation to Swedish * Added Key to select Swedish Translation * Added Swedish to Precompiled bins * Added missing " * Matched the order of days with Tasmota Timers * Update platformio.ini Support for enable / disable exceptions code in firmware for esp8266 core 2.5.0 (stage) or up * localization for Polish - KNX, timers, etc. * Add Domoticz Selector for Fanspeed Add support for iFan02 Fanspeed in Domoticz using a selector (arendst#4517) * Update sonoff.ino * 6.3.0.16 - Bump version 6.3.0.16 20181201 * Add support for iFan02 Fanspeed in Domoticz using a selector (arendst#4517) * Add Announce Switches to MQTT Discovery (arendst#4531) * Fix Domoticz Fanspeed Fix Domoticz Fanspeed * MCP230xx - Add Interrupt Retain * MCP230xx driver - add interrupt retention MCP230xx driver - add interrupt retention over teleperiod. * Fix HASS discovery of switches * Announce RGBW light, add 'White' command * Enabled forced local operation when button- or switchtopic is set * Update Hass discovery * v2.1.0012 decode-config.py: add new settings - add 6.3.0.16 setting change * decode-config.py: add new settings - add 6.3.0.16 setting change * Fix reversed logic when announcing buttons / switches * add DMP mode to MPU-6050 * fix compile issue on ESP8266 * Clean and shrink lights Clean and shrink lights * Add support for device registry * Update my_user_config.h * Fix Warning in Platformio if building MPU and KNX together * USE_MPU6050_DMP moved to my_user_config.h * USE_MPU6050_DMP moved to my_user_config.h * Corrected Domoticz Temp published from MPU6050 * decode-config.py: add new settings - add SetOption61 from PR arendst#4562 * Update my_user_config.h * Fix language file Fix language file * 6.3.0.17 Add features 6.3.0.17 20181211 * Add support for TheoV2 sensors as documented on https://sidweb.nl * Add support for SDM220 (arendst#3610) * Enhance support for MPU6050 using DMP (arendst#4581) * add manzuko "power strip" * Add more support * Add support for decoding Theo V2 sensors as documented on https://sidweb.nl using 434MHz RF sensor receiver * Add support for decoding Alecto V2 sensors like ACH2010, WS3000 and DKW2012 using 868MHz RF sensor receiver * Add support for Manzoku Power Strip (arendst#4590) * Updated Spanish Translation * Update de-DE.h * More tweak of Hass switch/button * Update fr-FR.h Added SDM220 new strings * Update fr-FR.h SDM220 strings reworked to fit in the space available * initial work on range-support * mqtt messages updated * Publish state message when changing effect * decode-config.py: Fix `@v` filename template (arendst#4609) - fix restore filename auto extension * add debug code to show final command sequence * correcting memcpy calls * Add TheoV2 sensor source Add TheoV2 sensor source and information used with Rf Sensor * Add LwIP 2 no features (Low Flash) * Fix ArduinoOTA for Core 2.5.0 (fix is backwards compatible) arendst#4619 * Fix ArduinoOTA for Core 2.5.0 Fix ArduinoOTA for Core 2.5.0 * Fix HomeAssistant Temp Sensor AutoDiscovery arendst#4627 * New 2.5.0-2 toolchain does not like uncast bitwise The new toolchain (2.5.0-2) used from core 2.5.0 does not want bitwise operations to be performed on non-integer variables so we cast the double used in send_2byte_float() to a (long) as it should be. * Fix NewPing-1.9.1 library.properties Fix NewPing-1.9.1 library.properties to avoid compiler warning about possibly not supporting ESP8266 whereas we know now that it does. This causes the compiler warning (which may alarm some users unnecessarily) that NewPing claims to run on avr and stm32. * Updates for release 6.4.0 Updates for release 6.4.0 * Prep for release Prep for release * Updates for release 6.4.0 Updates for release 6.4.0 * Updates for release 6.4.0 Updates for release 6.4.0 * Updates for release 6.4.0 Updates for release 6.4.0 * Prep for release Prep for release * Updates for release 6.4.0 Updates for release 6.4.0 * Updates for release 6.4.0 Updates for release 6.4.0 * Prep for merge * 6.4.0.1 New dev release * Removing duplicate entrys Options for core 2.5.0 where duplicated * Update README.md * Create boards.txt * Create platform.txt * No exceptions * it-IT language updated * option for firmware directory added * Ease selecting core versions Ease selecting core versions by grouping core parameters together. Select core version in group [core_active] * webserver: swap index and name in module configuration * Tune driver RF Sensor - Free memory when driver RF Sensor is compiled but not used. - Fix possible buffer overflow exceptions - Add rule and hardware info to source * introduce new api-call for dimmer-devices * SerialLog: output CR + LF instead of just LF * Update linker files Update linker files to released linker files for coe 2.4.2 and up * Add sk-SK language * Update bg-BG.h * Add support for AZ-Instrument 7798 CO2 meter/datalogger. * Add support for AZ-Instrument 7798 CO2 meter/datalogger. * Revert platformio.ini and my_user_config to original version, adding line for new sensor but leaving it commented out. * Include changes from original into sonoff/language/bg-BG.h * Updated from originals: platformio.ini, sonoff/my_user_config.h. * Revert to original RELEASENOTES.md. * Add void to functions without parameters * Fix temperature conversion Fix temperature conversion to still use ConvertTemp() even if meter sends the value in F * Add support for AZ-Instrument 7798 CO2 Add support for AZ-Instrument 7798 CO2 meter/datalogger * pressure unit of measure reporting Added a dedicated pressure sensor management to report back as pressure sensor and not fallback as a generic sensor in HA autodiscovery process * add missing units of measurements for energy * removed some errors from copy pasting.. * add empty unit of measurement for any sensors * Added option for checking mqtt tls against root ca Signed-off-by: Frank Meies <19324766+fmeies@users.noreply.github.com> * Change RAM usage BMP/BME Change RAM usage BMP/BME I2C sensors * Update Arduino IDE core 2.5.0 files Update Arduino IDE core 2.5.0 files * Fix wifi strongest signal detection Fix wifi strongest signal detection (arendst#4704) * 6.4.0.2 Fix possible dtostrf bos 6.4.0.2 20181221 * Fix possible dtostrf buffer overflows by increasing buffers * Still need patched PWM for core 2.5.0 Still need patched PWM for core 2.5.0 * Check for core version when enabling tls ca cert Signed-off-by: Frank Meies <19324766+fmeies@users.noreply.github.com> * Check for core version when enabling tls ca cert, changed names of defines Signed-off-by: Frank Meies <19324766+fmeies@users.noreply.github.com> * Remove SetOption55 (hass_short_discovery_msg) * Rename HASS discovery string constants * Remove Alexa message "this value is outside the range of the device" * 6.4.0.3 Hass and Alexa fixes 6.4.0.3 20181222 * Change Hass discovery to short MQTT messages as used by Hass 0.81 and up (arendst#4711) * Change FallbackTopic detection (arendst#4706) * Add define WIFI_SOFT_AP_CHANNEL in my_user_config.h to set Soft Access Point Channel number between 1 and 13 as used by Wifi Manager web GUI (arendst#4673) * Fix Alexa "this value is outside the range of the device". Needs power cycle and Alexa deletion/discovery cycle. (arendst#3159, arendst#4712) * Add optional TLS_CA_CERT Add define USE_MQTT_TLS_CA_CERT for checking MQTT TLS against root ca using Let's Encrypt cert from sonoff_letsencrypt.h - not supported with core 2.3.0 (arendst#4703) * decode-config.py: adapt settings change - remove SetOption55 (hass_short_discovery_msg) * Change FallbackTopic Change FallbackTopic from cmnd/<mqttclient>/ to cmnd/<mqttclient>_fb/ to discriminate from Topic (arendst#1528) * PS_16_DZ: fix broken if-statement * Change MQTT GUI password handling Change MQTT GUI password handling (arendst#4723) * Release 6.4.1 * 6.4.1.1 Fix most compiler warnings 6.4.1.1 20181224 * Fix most compiler warnings * Fix compiler warning Fix compiler warning * Change switch debounce Change switch input detection by optimizing switch debounce (arendst#4724) * Add INPUT_PULLUP option for single DS18B20 * Add variable %timestamp% to be used in rules This PR adds a new variable %timestamp% to be used in a rule to allow the user to include the Time Stamp as Tasmota has for Status, Sensors, etc, for example: Command: publish stat/topic/sensor {"Time":"%timestamp%","mysensor":"%var1%"} Output: {"Time":"2018-12-27T12:52:57","mysensor":"1"} (arendst#4734) * 6.4.1.2 Rewrite Switch driver 6.4.1.2 20181228 * Change switch driver making it modular and introduce input filter (arendst#4665, arendst#4724) * Add define DS18B20_INTERNAL_PULLUP to select internal input pullup when only one DS18B20 sensor is connected eliminating external resistor (arendst#4738) * Add variable %timestamp% to rules (arendst#4749) * Update platformio.ini with stage Update platformio.ini with latest stage option * Prep for template tuning * 6.4.1.3 Change sonoff_template.h 6.4.1.3 20181229 * Change sonoff_template.h module lay-out by removing non-configurable GPIOs * Fix Typo in Spanish Translation * Fix MGC3130/AZ7798 compile error * Add debugging options to Switch Add more debugging options to Switch using SwitchDebounce * Fix DS3231 driver Fix DS3231 driver breaking function chain (arendst#4759) * Disable unused feature * Revert "Disable unused feature" This reverts commit 8fe61f6. * Add test for result usage * Add tests for result

@arendst

* Release 6.2.0 Release 6.2.0 * Prep release * Prep release * Visual Studio Code adds * Added Timeprop and PID * Merge to 6.4.1 (#1) (#2) * PS_16_DZ: GPIO13 => LED1 * PS_16_DZ: cleanup code * Add Command CalcRes * Update settings.ino * Update decode-config.py * Add SetOption59 info Add SetOption59 info * decode-config.py: add 6.3.0.11 to .14 settings * Add dynamic buffer space Make serial buffer space reservation dynamic * Add dynamic buffer space Add dynamic buffer space * Fix dynamic buffer handling Fix dynamic buffer handling * Move static to dynamic buffers * Add support for SM Smart Wifi Dimmer PS-16-DZ (arendst#4465) * Move some static (serial) buffers to dynamic buffers * Prep for Software SPI Prep for Software SPI used by some displays * PS_16_DZ: only update brightness if it actually changed * PS_16_DZ: reduce buffer-size and actually check for overflow * PS_16_DZ: optimize for size * PS_16_DZ: further optimization * PS_16_DZ: leave space for trailing 0-byte * Hass: Restart if topic is changed * PS_16_DZ: cleanup * Fix possible overflow situation Fix possible overflow situation * Small improvements to Hass MQTT discovery * Add support for Teckin US Add support for Teckin US Wifi Smart Switch with Energy Monitoring (arendst#4481) * Update display and epaper drivers Update display and epaper drivers * switch to using NewPing lib directly for sr04 add NewPing-1.9.1 lib * Housekeeping * Upd settings.ino - set sleep=0 when SetOption36>0 Update settings.ino - set sleep=0 when SetOption36>0 * Prevent sleep and SetOption36 being used concurrently Prevent sleep and SetOption36 being used concurrently * Fix sleep->SetOption36 transition * Update fr-FR.h Synced with changes since v6.2.1.7 * Merge sleep command * Bump version to 0x0603000F Bump version to 0x0603000F to make sure new sleep command takes effect on 50 as default for upgrades where sleep is < 50. * Update support_wifi.ino * 6.3.0.15 Update dynamic sleep 6.3.0.15 20181201 * Removed command SetOption36 (arendst#4497) * Add command SetOption60 0/1 to select dynamic sleep (0) or sleep (1) (arendst#4497) * Update with dynamic sleep flag * Added Support for ButtonN and SwitchN * RULES: Added BREAK as an alternative ENDON RULES: Added BREAK as an alternative ENDON that will stop the execution of the following rules. If a rule that ends with BREAK, is triggered, then the following rules of that set will not be executed. This is useful for cases like: arendst#4477 * Update xsns_22_sr04.ino * RULES: Added BREAK as an alternative ENDON * Delete duplicated min and max functions * Update README.md * Update _changelog.ino * Further improve Hass auto discovery * Add dummy soft_spi_flg to satisfy compiler @arendst Just adding this, for now, to satisfy the compiler until you get time to merge the rest of the Software SPI support. * decode-config.py: add new settings - add 6.3.0.15 setting change - adapt 6.3.0.13 setting change * Add GPIO2 for Sonoff Basic Template Add GPIO2 for Sonoff Basic Template * Add support for GPIO02 for newer Sonoff Basic Add support for GPIO02 for newer Sonoff Basic * Fix Compilation issue with STAGE Core Now the Stage core has the the same STR macro defined in sonoff.h. * Create RF-Bridge-EFM8BB1-20181127.hex ignore RF pulses < 100µs, increased uart RX buffer -> stopp red led flashing * Announce switches * Final fix compile error (arendst#4509) Final fix soft_spi_flg compile error (arendst#4509) * Fix logic for ON/OFF vs TOGGLE * Initial translation to Swedish * Added Key to select Swedish Translation * Added Swedish to Precompiled bins * Added missing " * Matched the order of days with Tasmota Timers * Update platformio.ini Support for enable / disable exceptions code in firmware for esp8266 core 2.5.0 (stage) or up * localization for Polish - KNX, timers, etc. * Add Domoticz Selector for Fanspeed Add support for iFan02 Fanspeed in Domoticz using a selector (arendst#4517) * Update sonoff.ino * 6.3.0.16 - Bump version 6.3.0.16 20181201 * Add support for iFan02 Fanspeed in Domoticz using a selector (arendst#4517) * Add Announce Switches to MQTT Discovery (arendst#4531) * Fix Domoticz Fanspeed Fix Domoticz Fanspeed * MCP230xx - Add Interrupt Retain * MCP230xx driver - add interrupt retention MCP230xx driver - add interrupt retention over teleperiod. * Fix HASS discovery of switches * Announce RGBW light, add 'White' command * Enabled forced local operation when button- or switchtopic is set * Update Hass discovery * v2.1.0012 decode-config.py: add new settings - add 6.3.0.16 setting change * decode-config.py: add new settings - add 6.3.0.16 setting change * Fix reversed logic when announcing buttons / switches * add DMP mode to MPU-6050 * fix compile issue on ESP8266 * Clean and shrink lights Clean and shrink lights * Add support for device registry * Update my_user_config.h * Fix Warning in Platformio if building MPU and KNX together * USE_MPU6050_DMP moved to my_user_config.h * USE_MPU6050_DMP moved to my_user_config.h * Corrected Domoticz Temp published from MPU6050 * decode-config.py: add new settings - add SetOption61 from PR arendst#4562 * Update my_user_config.h * Fix language file Fix language file * 6.3.0.17 Add features 6.3.0.17 20181211 * Add support for TheoV2 sensors as documented on https://sidweb.nl * Add support for SDM220 (arendst#3610) * Enhance support for MPU6050 using DMP (arendst#4581) * add manzuko "power strip" * Add more support * Add support for decoding Theo V2 sensors as documented on https://sidweb.nl using 434MHz RF sensor receiver * Add support for decoding Alecto V2 sensors like ACH2010, WS3000 and DKW2012 using 868MHz RF sensor receiver * Add support for Manzoku Power Strip (arendst#4590) * Updated Spanish Translation * Update de-DE.h * More tweak of Hass switch/button * Update fr-FR.h Added SDM220 new strings * Update fr-FR.h SDM220 strings reworked to fit in the space available * initial work on range-support * mqtt messages updated * Publish state message when changing effect * decode-config.py: Fix `@v` filename template (arendst#4609) - fix restore filename auto extension * add debug code to show final command sequence * correcting memcpy calls * Add TheoV2 sensor source Add TheoV2 sensor source and information used with Rf Sensor * Add LwIP 2 no features (Low Flash) * Fix ArduinoOTA for Core 2.5.0 (fix is backwards compatible) arendst#4619 * Fix ArduinoOTA for Core 2.5.0 Fix ArduinoOTA for Core 2.5.0 * Fix HomeAssistant Temp Sensor AutoDiscovery arendst#4627 * New 2.5.0-2 toolchain does not like uncast bitwise The new toolchain (2.5.0-2) used from core 2.5.0 does not want bitwise operations to be performed on non-integer variables so we cast the double used in send_2byte_float() to a (long) as it should be. * Fix NewPing-1.9.1 library.properties Fix NewPing-1.9.1 library.properties to avoid compiler warning about possibly not supporting ESP8266 whereas we know now that it does. This causes the compiler warning (which may alarm some users unnecessarily) that NewPing claims to run on avr and stm32. * Updates for release 6.4.0 Updates for release 6.4.0 * Prep for release Prep for release * Updates for release 6.4.0 Updates for release 6.4.0 * Updates for release 6.4.0 Updates for release 6.4.0 * Updates for release 6.4.0 Updates for release 6.4.0 * Prep for release Prep for release * Updates for release 6.4.0 Updates for release 6.4.0 * Updates for release 6.4.0 Updates for release 6.4.0 * Prep for merge * 6.4.0.1 New dev release * Removing duplicate entrys Options for core 2.5.0 where duplicated * Update README.md * Create boards.txt * Create platform.txt * No exceptions * it-IT language updated * option for firmware directory added * Ease selecting core versions Ease selecting core versions by grouping core parameters together. Select core version in group [core_active] * webserver: swap index and name in module configuration * Tune driver RF Sensor - Free memory when driver RF Sensor is compiled but not used. - Fix possible buffer overflow exceptions - Add rule and hardware info to source * introduce new api-call for dimmer-devices * SerialLog: output CR + LF instead of just LF * Update linker files Update linker files to released linker files for coe 2.4.2 and up * Add sk-SK language * Update bg-BG.h * Add support for AZ-Instrument 7798 CO2 meter/datalogger. * Add support for AZ-Instrument 7798 CO2 meter/datalogger. * Revert platformio.ini and my_user_config to original version, adding line for new sensor but leaving it commented out. * Include changes from original into sonoff/language/bg-BG.h * Updated from originals: platformio.ini, sonoff/my_user_config.h. * Revert to original RELEASENOTES.md. * Add void to functions without parameters * Fix temperature conversion Fix temperature conversion to still use ConvertTemp() even if meter sends the value in F * Add support for AZ-Instrument 7798 CO2 Add support for AZ-Instrument 7798 CO2 meter/datalogger * pressure unit of measure reporting Added a dedicated pressure sensor management to report back as pressure sensor and not fallback as a generic sensor in HA autodiscovery process * add missing units of measurements for energy * removed some errors from copy pasting.. * add empty unit of measurement for any sensors * Added option for checking mqtt tls against root ca Signed-off-by: Frank Meies <19324766+fmeies@users.noreply.github.com> * Change RAM usage BMP/BME Change RAM usage BMP/BME I2C sensors * Update Arduino IDE core 2.5.0 files Update Arduino IDE core 2.5.0 files * Fix wifi strongest signal detection Fix wifi strongest signal detection (arendst#4704) * 6.4.0.2 Fix possible dtostrf bos 6.4.0.2 20181221 * Fix possible dtostrf buffer overflows by increasing buffers * Still need patched PWM for core 2.5.0 Still need patched PWM for core 2.5.0 * Check for core version when enabling tls ca cert Signed-off-by: Frank Meies <19324766+fmeies@users.noreply.github.com> * Check for core version when enabling tls ca cert, changed names of defines Signed-off-by: Frank Meies <19324766+fmeies@users.noreply.github.com> * Remove SetOption55 (hass_short_discovery_msg) * Rename HASS discovery string constants * Remove Alexa message "this value is outside the range of the device" * 6.4.0.3 Hass and Alexa fixes 6.4.0.3 20181222 * Change Hass discovery to short MQTT messages as used by Hass 0.81 and up (arendst#4711) * Change FallbackTopic detection (arendst#4706) * Add define WIFI_SOFT_AP_CHANNEL in my_user_config.h to set Soft Access Point Channel number between 1 and 13 as used by Wifi Manager web GUI (arendst#4673) * Fix Alexa "this value is outside the range of the device". Needs power cycle and Alexa deletion/discovery cycle. (arendst#3159, arendst#4712) * Add optional TLS_CA_CERT Add define USE_MQTT_TLS_CA_CERT for checking MQTT TLS against root ca using Let's Encrypt cert from sonoff_letsencrypt.h - not supported with core 2.3.0 (arendst#4703) * decode-config.py: adapt settings change - remove SetOption55 (hass_short_discovery_msg) * Change FallbackTopic Change FallbackTopic from cmnd/<mqttclient>/ to cmnd/<mqttclient>_fb/ to discriminate from Topic (arendst#1528) * PS_16_DZ: fix broken if-statement * Change MQTT GUI password handling Change MQTT GUI password handling (arendst#4723) * Release 6.4.1 * 6.4.1.1 Fix most compiler warnings 6.4.1.1 20181224 * Fix most compiler warnings * Fix compiler warning Fix compiler warning * Change switch debounce Change switch input detection by optimizing switch debounce (arendst#4724) * Add INPUT_PULLUP option for single DS18B20 * Add variable %timestamp% to be used in rules This PR adds a new variable %timestamp% to be used in a rule to allow the user to include the Time Stamp as Tasmota has for Status, Sensors, etc, for example: Command: publish stat/topic/sensor {"Time":"%timestamp%","mysensor":"%var1%"} Output: {"Time":"2018-12-27T12:52:57","mysensor":"1"} (arendst#4734) * 6.4.1.2 Rewrite Switch driver 6.4.1.2 20181228 * Change switch driver making it modular and introduce input filter (arendst#4665, arendst#4724) * Add define DS18B20_INTERNAL_PULLUP to select internal input pullup when only one DS18B20 sensor is connected eliminating external resistor (arendst#4738) * Add variable %timestamp% to rules (arendst#4749) * Update platformio.ini with stage Update platformio.ini with latest stage option * Prep for template tuning * 6.4.1.3 Change sonoff_template.h 6.4.1.3 20181229 * Change sonoff_template.h module lay-out by removing non-configurable GPIOs * Fix Typo in Spanish Translation * Fix MGC3130/AZ7798 compile error * Add debugging options to Switch Add more debugging options to Switch using SwitchDebounce * Fix DS3231 driver Fix DS3231 driver breaking function chain (arendst#4759) * Disable unused feature * Revert "Disable unused feature" This reverts commit 8fe61f6. * Add test for result usage * Add tests for result

Fix DS3231 driver breaking function chain (arendst#4759)

ghost · 2019-06-23T16:20:39Z

I have a similar problem, DS3231 is shown as BH1750, SHT3X-0x45 Temperature and SHT3X-0x45 Temperature.

I am trying to connect DS3231 to Sonoff Basic via serial as follows;

GPIO1 Serial Out SDA
GPIO3 Serial In SCL

Serial logging disabled.

log during boot up is as follows;

00:00:00 Project sonoff Konteynir Bahce Isiklari Version 6.5.0(sonoff)-2_3_0
00:00:00 I2C: DS3231 found at 0x68
00:00:00 WIF: Connecting to AP1 Sur in mode 11N as sonoff-8166...
00:00:00 Set time from DS3231 to RTC (UTC) Wed Dec 31 00:00:00 1969, (DST) Sun Feb 15 19:31:44 1970, (STD) Sun Sep 20 20:31:44 1970
09:28:23 WIF: Connected
09:28:23 HTP: Web server active on sonoff-8166 with IP address 192.168.74.36
19:14:22 Write Time TO DS3231 from NTP (UTC) Sun Jun 23 16:14:22 2019, (DST) Sun Mar 31 02:00:00 2019, (STD) Sun Oct 27 03:00:00 2019
19:15:19 CMD: I2Cscan
19:15:19 RSL: stat/sonoff/RESULT = {"I2CScan":"Error 4 at 0x02"}

Jason2866 · 2019-06-23T16:31:15Z

Gpio1 and 3 are not possible for a lot of use cases. See https://github.com/arendst/Sonoff-Tasmota/wiki/Expanding-Sonoffs#usable-pins

ghost · 2019-06-23T16:36:01Z

is there a way to use DS3231 with Sonoff Basic?

As far as I know, gpio1 and 3 are the only option available on board, other than soldering directly to ESP8x chip.

Jason2866 · 2019-06-23T16:42:52Z

As you wrote correct only way is to solder on Esp for 1 additional Gpio
There is GPIO14 or Gpio2 (depends on rev.) Wired to the header.

ghost · 2019-06-23T16:46:23Z

there is GPIO14 wired to the header, what are the pin configuration in this case?

ghost · 2019-06-24T06:03:50Z

it worked on GPIO1 Serial Out SDA and GPIO3 Serial In SCL after adding forward slashes to other I2C devices (basically I kept only #define USE_DS3231), built and uploaded. Serial logging disabled.

ascillato2 added the troubleshooting Type - Troubleshooting label Dec 30, 2018

ascillato2 added the awaiting feedback Action - Waiting for response or more information label Dec 30, 2018

arendst self-assigned this Dec 30, 2018

arendst added a commit that referenced this issue Dec 30, 2018

Fix DS3231 driver

fb4fe0f

Fix DS3231 driver breaking function chain (#4759)

arendst added the fixed Result - The work on the issue has ended label Dec 30, 2018

arendst removed their assignment Dec 30, 2018

mvincm closed this as completed Dec 30, 2018

wienerdogracing mentioned this issue Dec 31, 2018

Merge to 6.4.1 (#1) wienerdogracing/Sonoff-Tasmota#2

Merged

ascillato2 added bug Type - Confirmated Bug and removed awaiting feedback Action - Waiting for response or more information troubleshooting Type - Troubleshooting labels Jan 2, 2019

gemu2015 pushed a commit to gemu2015/Sonoff-Tasmota that referenced this issue Jan 27, 2019

Fix DS3231 driver

353b6be

Fix DS3231 driver breaking function chain (arendst#4759)

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

DS3231 shown as HX711 #4759

DS3231 shown as HX711 #4759

mvincm commented Dec 29, 2018 •

edited

Loading

Jason2866 commented Dec 29, 2018

mvincm commented Dec 29, 2018

ascillato2 commented Dec 30, 2018 •

edited

Loading

ascillato2 commented Dec 30, 2018

mvincm commented Dec 30, 2018

Jason2866 commented Dec 30, 2018 •

edited

Loading

arendst commented Dec 30, 2018

arendst commented Dec 30, 2018

Jason2866 commented Dec 30, 2018

mvincm commented Dec 30, 2018

ghost commented Jun 23, 2019

Jason2866 commented Jun 23, 2019

ghost commented Jun 23, 2019

Jason2866 commented Jun 23, 2019

ghost commented Jun 23, 2019

ghost commented Jun 24, 2019

DS3231 shown as HX711 #4759

DS3231 shown as HX711 #4759

Comments

mvincm commented Dec 29, 2018 • edited Loading

Jason2866 commented Dec 29, 2018

mvincm commented Dec 29, 2018

ascillato2 commented Dec 30, 2018 • edited Loading

ascillato2 commented Dec 30, 2018

mvincm commented Dec 30, 2018

Jason2866 commented Dec 30, 2018 • edited Loading

arendst commented Dec 30, 2018

arendst commented Dec 30, 2018

Jason2866 commented Dec 30, 2018

mvincm commented Dec 30, 2018

ghost commented Jun 23, 2019

Jason2866 commented Jun 23, 2019

ghost commented Jun 23, 2019

Jason2866 commented Jun 23, 2019

ghost commented Jun 23, 2019

ghost commented Jun 24, 2019

mvincm commented Dec 29, 2018 •

edited

Loading

ascillato2 commented Dec 30, 2018 •

edited

Loading

Jason2866 commented Dec 30, 2018 •

edited

Loading