update #1

RanderWang · 2018-06-28T02:29:44Z

No description provided.

@16kHz

When doing successive oversampling settings, it may fail to update filter parameters silently: - First time oversampling is being set, it will be successful, as fl->res is 0 initially. - Next attempts with various oversamp value may return 0 (success), but keep previous filter parameters, due to 'res' never reaches above or equal current 'fl->res'. This is particularly true when setting sampling frequency (that relies on oversamp). Typical failure without error: - run 1st test @16kHz samp freq will succeed - run new test @8khz will succeed as well - run new test @16kHz (again): sample rate will remain 8kHz without error Fixes: e2e6771 ("IIO: ADC: add STM32 DFSDM sigma delta ADC support") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

When channel clk source is set to "CLKOUT_F" or "CLKOUT_R" (e.g. div2), sample rate is currently set to half the requested value. Fixes: eca9498 ("IIO: ADC: add stm32 DFSDM support for PDM microphone") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Currently, we use int for buffer length and bytes_per_datum. However, kfifo uses unsigned int for length and size_t for element size. We need to make sure these matches or we will have bugs related to overflow (in the range between INT_MAX and UINT_MAX for length, for example). In addition, set_bytes_per_datum uses size_t while bytes_per_datum is an int, which would cause bugs for large values of bytes_per_datum. Change buffer length to use unsigned int and bytes_per_datum to use size_t. Signed-off-by: Martin Kelly <mkelly@xevo.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Currently, the following causes a kernel OOPS in memcpy: echo 1073741825 > buffer/length echo 1 > buffer/enable Note that using 1073741824 instead of 1073741825 causes "write error: Cannot allocate memory" but no OOPS. This is because 1073741824 == 2^30 and 1073741825 == 2^30+1. Since kfifo rounds up to the nearest power of 2, it will actually call kmalloc with roundup_pow_of_two(length) * bytes_per_datum. Using length == 1073741825 and bytes_per_datum == 2, we get: kmalloc(roundup_pow_of_two(1073741825) * 2 or kmalloc(2147483648 * 2) or kmalloc(4294967296) or kmalloc(UINT_MAX + 1) so this overflows to 0, causing kmalloc to return ZERO_SIZE_PTR and subsequent memcpy to fail once the device is enabled. Fix this by checking for overflow prior to allocating a kfifo. With this check added, the above code returns -EINVAL when enabling the buffer, rather than causing an OOPS. Signed-off-by: Martin Kelly <mkelly@xevo.com> cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

…l channels When iterating through the channels, the index in the array is not the scan index. Added an xlate function to translate to the proper index. The result of the bug is that the channel array is indexed with a wrong index, thus instead of the proper channel, we access invalid memory, which may lead to invalid results and/or corruption. This will be used also for devicetree channel xlate. Fixes: 5e1a1da ("iio: adc: at91-sama5d2_adc: add hw trigger and buffer support") Fixes: 073c662 ("iio: adc: at91-sama5d2_adc: add support for DMA") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

…er resume hid_sensor_set_power_work() powers the sensors back up after a resume based on the user_requested_state atomic_t. But hid_sensor_power_state() treats this as a boolean flag, leading to the following problematic scenario: 1) Some app starts using the iio-sensor in buffered / triggered mode, hid_sensor_data_rdy_trigger_set_state(true) gets called, setting user_requested_state to 1. 2) Something directly accesses a _raw value through sysfs, leading to a call to hid_sensor_power_state(true) followed by hid_sensor_power_state(false) call, this sets user_requested_state to 1 followed by setting it to 0. 3) Suspend/resume the machine, hid_sensor_set_power_work() now does NOT power the sensor back up because user_requested_state (wrongly) is 0. Which stops the app using the sensor in buffered mode from receiving any new values. This commit changes user_requested_state to a counter tracking how many times hid_sensor_power_state(true) was called instead, fixing this. Cc: Bastien Nocera <hadess@hadess.net> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

We need to select the buffer code, otherwise we get build errors with undefined functions on the trigger and buffer, if we select just IIO and then AT91_SAMA5D2_ADC from menuconfig This adds a Kconfig 'select' statement like other ADC drivers have it already. Fixes: 5e1a1da ("iio: adc: at91-sama5d2_adc: add hw trigger and buffer support") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

…/kernel/git/jic23/iio into staging-linus Jonathan writes: First round of IIO fixes for the 4.17 cycle. * core - fix up some issues with overflow etc around wrong types for some fo the kfifo handling functions. Seems unlikely this would be triggered in reality but the fixes are simple so let's tidy them up. Second patch deals with checking the userspace value passed for length for potential overflow. * ad7793 - Catch up with changes to the ad_sigma_delta core and use read_raw / write_raw iwth IIO_CHAN_INFO_SAMP_FEW to handle sampling frequency control. * at91-sama5d2 - Channel config for differential channels was completely broken. - Missing Kconfig dependency for buffer support. * hid-sensor - Fix an issue with powering up after resume due to wrong reference counting. * stm32-dfsdm - Fix an issue with second writes of the oversampling settings failing. - Fix an issue with the sample rate being set to half of requested value when particular clock source is used.

@offset

syzbot found a way to trigger an infinitie loop by overflowing @offset variable that has been forced to use u16 for some very obscure reason in the past. We probably want to look at NEXTHDR_FRAGMENT handling which looks wrong, in a separate patch. In net-next, we shall try to use skb_header_pointer() instead of pskb_may_pull(). watchdog: BUG: soft lockup - CPU#1 stuck for 134s! [syz-executor738:4553] Modules linked in: irq event stamp: 13885653 hardirqs last enabled at (13885652): [<ffffffff878009d5>] restore_regs_and_return_to_kernel+0x0/0x2b hardirqs last disabled at (13885653): [<ffffffff87800905>] interrupt_entry+0xb5/0xf0 arch/x86/entry/entry_64.S:625 softirqs last enabled at (13614028): [<ffffffff84df0809>] tun_napi_alloc_frags drivers/net/tun.c:1478 [inline] softirqs last enabled at (13614028): [<ffffffff84df0809>] tun_get_user+0x1dd9/0x4290 drivers/net/tun.c:1825 softirqs last disabled at (13614032): [<ffffffff84df1b6f>] tun_get_user+0x313f/0x4290 drivers/net/tun.c:1942 CPU: 1 PID: 4553 Comm: syz-executor738 Not tainted 4.17.0-rc3+ #40 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:check_kcov_mode kernel/kcov.c:67 [inline] RIP: 0010:__sanitizer_cov_trace_pc+0x20/0x50 kernel/kcov.c:101 RSP: 0018:ffff8801d8cfe250 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: ffff8801d88a8080 RBX: ffff8801d7389e40 RCX: 0000000000000006 RDX: 0000000000000000 RSI: ffffffff868da4ad RDI: ffff8801c8a53277 RBP: ffff8801d8cfe250 R08: ffff8801d88a8080 R09: ffff8801d8cfe3e8 R10: ffffed003b19fc87 R11: ffff8801d8cfe43f R12: ffff8801c8a5327f R13: 0000000000000000 R14: ffff8801c8a4e5fe R15: ffff8801d8cfe3e8 FS: 0000000000d88940(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffff600400 CR3: 00000001acab3000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: _decode_session6+0xc1d/0x14f0 net/ipv6/xfrm6_policy.c:150 __xfrm_decode_session+0x71/0x140 net/xfrm/xfrm_policy.c:2368 xfrm_decode_session_reverse include/net/xfrm.h:1213 [inline] icmpv6_route_lookup+0x395/0x6e0 net/ipv6/icmp.c:372 icmp6_send+0x1982/0x2da0 net/ipv6/icmp.c:551 icmpv6_send+0x17a/0x300 net/ipv6/ip6_icmp.c:43 ip6_input_finish+0x14e1/0x1a30 net/ipv6/ip6_input.c:305 NF_HOOK include/linux/netfilter.h:288 [inline] ip6_input+0xe1/0x5e0 net/ipv6/ip6_input.c:327 dst_input include/net/dst.h:450 [inline] ip6_rcv_finish+0x29c/0xa10 net/ipv6/ip6_input.c:71 NF_HOOK include/linux/netfilter.h:288 [inline] ipv6_rcv+0xeb8/0x2040 net/ipv6/ip6_input.c:208 __netif_receive_skb_core+0x2468/0x3650 net/core/dev.c:4646 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4711 netif_receive_skb_internal+0x126/0x7b0 net/core/dev.c:4785 napi_frags_finish net/core/dev.c:5226 [inline] napi_gro_frags+0x631/0xc40 net/core/dev.c:5299 tun_get_user+0x3168/0x4290 drivers/net/tun.c:1951 tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:1996 call_write_iter include/linux/fs.h:1784 [inline] do_iter_readv_writev+0x859/0xa50 fs/read_write.c:680 do_iter_write+0x185/0x5f0 fs/read_write.c:959 vfs_writev+0x1c7/0x330 fs/read_write.c:1004 do_writev+0x112/0x2f0 fs/read_write.c:1039 __do_sys_writev fs/read_write.c:1112 [inline] __se_sys_writev fs/read_write.c:1109 [inline] __x64_sys_writev+0x75/0xb0 fs/read_write.c:1109 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reported-by: syzbot+0053c8...@syzkaller.appspotmail.com Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

If the boot ACL entry is already NULL we should not fill in the upper two DWs with 0xfffffffff. Otherwise they are not shown as empty entries when the sysfs attribute is read. Fixes: 9aaa3b8 ("thunderbolt: Add support for preboot ACL") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Yehezkel Bernat <yehezkelshb@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Doing faccessat("/afs/some/directory", 0) triggers a BUG in the permissions check code. Fix this by just removing the BUG section. If no permissions are asked for, just return okay if the file exists. Also: (1) Split up the directory check so that it has separate if-statements rather than if-else-if (e.g. checking for MAY_EXEC shouldn't skip the check for MAY_READ and MAY_WRITE). (2) Check for MAY_CHDIR as MAY_EXEC. Without the main fix, the following BUG may occur: kernel BUG at fs/afs/security.c:386! invalid opcode: 0000 [#1] SMP PTI ... RIP: 0010:afs_permission+0x19d/0x1a0 [kafs] ... Call Trace: ? inode_permission+0xbe/0x180 ? do_faccessat+0xdc/0x270 ? do_syscall_64+0x60/0x1f0 ? entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 00d3b7a ("[AFS]: Add security support.") Reported-by: Jonathan Billings <jsbillings@jsbillings.org> Signed-off-by: David Howells <dhowells@redhat.com>

In theory the AFS_VLSF_BACKVOL flag for a server in a vldb entry would indicate the presence of a backup volume on that server. In practice however, this flag is never set, and the presence of a backup volume is implied by the entry having AFS_VLF_BACKEXISTS set, for the server that hosts the read-write volume (has AFS_VLSF_RWVOL). Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com>

…bj_dump() In the nft_ct_helper_obj_dump(), always priv->helper4 is dereferenced. But if family is ipv6, priv->helper6 should be dereferenced. Steps to reproduces: #test.nft table ip6 filter { ct helper ftp { type "ftp" protocol tcp } chain input { type filter hook input priority 4; ct helper set "ftp" } } %nft -f test.nft %nft list ruleset we can see the below messages: [ 916.286233] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 916.294777] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 916.302613] Modules linked in: nft_objref nf_conntrack_sip nf_conntrack_snmp nf_conntrack_broadcast nf_conntrack_ftp nft_ct nf_conntrack nf_tables nfnetlink [last unloaded: nfnetlink] [ 916.318758] CPU: 1 PID: 2093 Comm: nft Not tainted 4.17.0-rc4+ #181 [ 916.326772] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015 [ 916.338773] RIP: 0010:strlen+0x1a/0x90 [ 916.342781] RSP: 0018:ffff88010ff0f2f8 EFLAGS: 00010292 [ 916.346773] RAX: dffffc0000000000 RBX: ffff880119b26ee8 RCX: ffff88010c150038 [ 916.354777] RDX: 0000000000000002 RSI: ffff880119b26ee8 RDI: 0000000000000010 [ 916.362773] RBP: 0000000000000010 R08: 0000000000007e88 R09: ffff88010c15003c [ 916.370773] R10: ffff88010c150037 R11: ffffed002182a007 R12: ffff88010ff04040 [ 916.378779] R13: 0000000000000010 R14: ffff880119b26f30 R15: ffff88010ff04110 [ 916.387265] FS: 00007f57a1997700(0000) GS:ffff88011b800000(0000) knlGS:0000000000000000 [ 916.394785] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 916.402778] CR2: 00007f57a0ac80f0 CR3: 000000010ff02000 CR4: 00000000001006e0 [ 916.410772] Call Trace: [ 916.414787] nft_ct_helper_obj_dump+0x94/0x200 [nft_ct] [ 916.418779] ? nft_ct_set_eval+0x560/0x560 [nft_ct] [ 916.426771] ? memset+0x1f/0x40 [ 916.426771] ? __nla_reserve+0x92/0xb0 [ 916.434774] ? memcpy+0x34/0x50 [ 916.434774] nf_tables_fill_obj_info+0x484/0x860 [nf_tables] [ 916.442773] ? __nft_release_basechain+0x600/0x600 [nf_tables] [ 916.450779] ? lock_acquire+0x193/0x380 [ 916.454771] ? lock_acquire+0x193/0x380 [ 916.458789] ? nf_tables_dump_obj+0x148/0xcb0 [nf_tables] [ 916.462777] nf_tables_dump_obj+0x5f0/0xcb0 [nf_tables] [ 916.470769] ? __alloc_skb+0x30b/0x500 [ 916.474779] netlink_dump+0x752/0xb50 [ 916.478775] __netlink_dump_start+0x4d3/0x750 [ 916.482784] nf_tables_getobj+0x27a/0x930 [nf_tables] [ 916.490774] ? nft_obj_notify+0x100/0x100 [nf_tables] [ 916.494772] ? nf_tables_getobj+0x930/0x930 [nf_tables] [ 916.502579] ? nf_tables_dump_flowtable_done+0x70/0x70 [nf_tables] [ 916.506774] ? nft_obj_notify+0x100/0x100 [nf_tables] [ 916.514808] nfnetlink_rcv_msg+0x8ab/0xa86 [nfnetlink] [ 916.518771] ? nfnetlink_rcv_msg+0x550/0xa86 [nfnetlink] [ 916.526782] netlink_rcv_skb+0x23e/0x360 [ 916.530773] ? nfnetlink_bind+0x200/0x200 [nfnetlink] [ 916.534778] ? debug_check_no_locks_freed+0x280/0x280 [ 916.542770] ? netlink_ack+0x870/0x870 [ 916.546786] ? ns_capable_common+0xf4/0x130 [ 916.550765] nfnetlink_rcv+0x172/0x16c0 [nfnetlink] [ 916.554771] ? sched_clock_local+0xe2/0x150 [ 916.558774] ? sched_clock_cpu+0x144/0x180 [ 916.566575] ? lock_acquire+0x380/0x380 [ 916.570775] ? sched_clock_local+0xe2/0x150 [ 916.574765] ? nfnetlink_net_init+0x130/0x130 [nfnetlink] [ 916.578763] ? sched_clock_cpu+0x144/0x180 [ 916.582770] ? lock_acquire+0x193/0x380 [ 916.590771] ? lock_acquire+0x193/0x380 [ 916.594766] ? lock_acquire+0x380/0x380 [ 916.598760] ? netlink_deliver_tap+0x262/0xa60 [ 916.602766] ? lock_acquire+0x193/0x380 [ 916.606766] netlink_unicast+0x3ef/0x5a0 [ 916.610771] ? netlink_attachskb+0x630/0x630 [ 916.614763] netlink_sendmsg+0x72a/0xb00 [ 916.618769] ? netlink_unicast+0x5a0/0x5a0 [ 916.626766] ? _copy_from_user+0x92/0xc0 [ 916.630773] __sys_sendto+0x202/0x300 [ 916.634772] ? __ia32_sys_getpeername+0xb0/0xb0 [ 916.638759] ? lock_acquire+0x380/0x380 [ 916.642769] ? lock_acquire+0x193/0x380 [ 916.646761] ? finish_task_switch+0xf4/0x560 [ 916.650763] ? __schedule+0x582/0x19a0 [ 916.655301] ? __sched_text_start+0x8/0x8 [ 916.655301] ? up_read+0x1c/0x110 [ 916.655301] ? __do_page_fault+0x48b/0xaa0 [ 916.655301] ? entry_SYSCALL_64_after_hwframe+0x59/0xbe [ 916.655301] __x64_sys_sendto+0xdd/0x1b0 [ 916.655301] do_syscall_64+0x96/0x3d0 [ 916.655301] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 916.655301] RIP: 0033:0x7f57a0ff5e03 [ 916.655301] RSP: 002b:00007fff6367e0a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 916.655301] RAX: ffffffffffffffda RBX: 00007fff6367f1e0 RCX: 00007f57a0ff5e03 [ 916.655301] RDX: 0000000000000020 RSI: 00007fff6367e110 RDI: 0000000000000003 [ 916.655301] RBP: 00007fff6367e100 R08: 00007f57a0ce9160 R09: 000000000000000c [ 916.655301] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff6367e110 [ 916.655301] R13: 0000000000000020 R14: 00007f57a153c610 R15: 0000562417258de0 [ 916.655301] Code: ff ff ff 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 fa 53 48 c1 ea 03 48 b8 00 00 00 00 00 fc ff df 48 89 fd 48 83 ec 08 <0f> b6 04 02 48 89 fa 83 e2 07 38 d0 7f [ 916.655301] RIP: strlen+0x1a/0x90 RSP: ffff88010ff0f2f8 [ 916.771929] ---[ end trace 1065e048e72479fe ]--- [ 916.777204] Kernel panic - not syncing: Fatal exception [ 916.778158] Kernel Offset: 0x14000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

strlcpy() can't be safely used on a user-space provided string, as it can try to read beyond the buffer's end, if the latter is not NULL terminated. Leveraging the above, syzbot has been able to trigger the following splat: BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline] BUG: KASAN: stack-out-of-bounds in compat_mtw_from_user net/bridge/netfilter/ebtables.c:1957 [inline] BUG: KASAN: stack-out-of-bounds in ebt_size_mwt net/bridge/netfilter/ebtables.c:2059 [inline] BUG: KASAN: stack-out-of-bounds in size_entry_mwt net/bridge/netfilter/ebtables.c:2155 [inline] BUG: KASAN: stack-out-of-bounds in compat_copy_entries+0x96c/0x14a0 net/bridge/netfilter/ebtables.c:2194 Write of size 33 at addr ffff8801b0abf888 by task syz-executor0/4504 CPU: 0 PID: 4504 Comm: syz-executor0 Not tainted 4.17.0-rc2+ #40 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267 memcpy+0x37/0x50 mm/kasan/kasan.c:303 strlcpy include/linux/string.h:300 [inline] compat_mtw_from_user net/bridge/netfilter/ebtables.c:1957 [inline] ebt_size_mwt net/bridge/netfilter/ebtables.c:2059 [inline] size_entry_mwt net/bridge/netfilter/ebtables.c:2155 [inline] compat_copy_entries+0x96c/0x14a0 net/bridge/netfilter/ebtables.c:2194 compat_do_replace+0x483/0x900 net/bridge/netfilter/ebtables.c:2285 compat_do_ebt_set_ctl+0x2ac/0x324 net/bridge/netfilter/ebtables.c:2367 compat_nf_sockopt net/netfilter/nf_sockopt.c:144 [inline] compat_nf_setsockopt+0x9b/0x140 net/netfilter/nf_sockopt.c:156 compat_ip_setsockopt+0xff/0x140 net/ipv4/ip_sockglue.c:1279 inet_csk_compat_setsockopt+0x97/0x120 net/ipv4/inet_connection_sock.c:1041 compat_tcp_setsockopt+0x49/0x80 net/ipv4/tcp.c:2901 compat_sock_common_setsockopt+0xb4/0x150 net/core/sock.c:3050 __compat_sys_setsockopt+0x1ab/0x7c0 net/compat.c:403 __do_compat_sys_setsockopt net/compat.c:416 [inline] __se_compat_sys_setsockopt net/compat.c:413 [inline] __ia32_compat_sys_setsockopt+0xbd/0x150 net/compat.c:413 do_syscall_32_irqs_on arch/x86/entry/common.c:323 [inline] do_fast_syscall_32+0x345/0xf9b arch/x86/entry/common.c:394 entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7fb3cb9 RSP: 002b:00000000fff0c26c EFLAGS: 00000282 ORIG_RAX: 000000000000016e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000000000 RDX: 0000000000000080 RSI: 0000000020000300 RDI: 00000000000005f4 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 The buggy address belongs to the page: page:ffffea0006c2afc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x2fffc0000000000() raw: 02fffc0000000000 0000000000000000 0000000000000000 00000000ffffffff raw: 0000000000000000 ffffea0006c20101 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Fix the issue replacing the unsafe function with strscpy() and taking care of possible errors. Fixes: 81e675c ("netfilter: ebtables: add CONFIG_COMPAT support") Reported-and-tested-by: syzbot+4e42a04e0bc33cb6c087@syzkaller.appspotmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

New compilers use the floating-point registers as spill registers when there is high register pressure. In the purgatory however, the afp control bit is not set. This leads to an exception whenever a floating-point instruction is used, which again causes an interrupt loop. Forbid the compiler to use floating-point instructions by adding -msoft-float to KBUILD_CFLAGS. Signed-off-by: Philipp Rudo <prudo@linux.ibm.com> Fixes: 840798a (s390/kexec_file: Add purgatory) Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The i2c XLP9xx driver is maintained by Cavium. Add George Cherian and Jan Glauber as the Maintainers. Signed-off-by: George Cherian <george.cherian@cavium.com> Acked-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

…l undefined issue. We can use the generic lib to fix these error because the symbol of libgcc in toolchain is not exported. ERROR: "__ucmpdi2" [fs/xfs/xfs.ko] undefined! ERROR: "__ashrdi3" [fs/xfs/xfs.ko] undefined! ERROR: "__lshrdi3" [fs/xfs/xfs.ko] undefined! ERROR: "__ashldi3" [fs/ntfs/ntfs.ko] undefined! ... Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>

To include kernel/Kconfig.freezer to make sure the dependency between CONFIG_CGROUP_FREEZER and CONFIG_FREEZER It will cause building error when I make allmodconfig. kernel/cgroup/freezer.c: In function 'freezer_css_online': kernel/cgroup/freezer.c:116:15: error: 'system_freezing_cnt' undeclared (first use in this function) atomic_inc(&system_freezing_cnt); ^~~~~~~~~~~~~~~~~~~ kernel/cgroup/freezer.c:116:15: note: each undeclared identifier is reported only once for each function it appears in kernel/cgroup/freezer.c: In function 'freezer_css_offline': kernel/cgroup/freezer.c:137:15: error: 'system_freezing_cnt' undeclared (first use in this function) atomic_dec(&system_freezing_cnt); ^~~~~~~~~~~~~~~~~~~ kernel/cgroup/freezer.c: In function 'freezer_attach': kernel/cgroup/freezer.c:181:4: error: implicit declaration of function 'freeze_task' [-Werror=implicit-function-declaration] freeze_task(task); ^~~~~~~~~~~ kernel/cgroup/freezer.c: In function 'freezer_apply_state': kernel/cgroup/freezer.c:360:16: error: 'system_freezing_cnt' undeclared (first use in this function) atomic_inc(&system_freezing_cnt); ^~~~~~~~~~~~~~~~~~~ Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>

When I compiled with allmodconfig, it caused this building failed. crypto/xor.c:25:21: fatal error: asm/xor.h: No such file or directory #include <asm/xor.h> ^ compilation terminated. Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>

…GE_SHARED It broke the 'allmodconfig' build. drivers/gpu/drm/udl/udl_fb.c: In function 'udl_fb_mmap': drivers/gpu/drm/udl/udl_fb.c:183:52: error: 'PAGE_SHARED' undeclared (first use in this function) if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) ^~~~~~~~~~~ drivers/gpu/drm/udl/udl_fb.c:183:52: note: each undeclared identifier is reported only once for each function it appears in make[4]: *** [drivers/gpu/drm/udl/udl_fb.o] Error 1 Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>

…e and flush_kernel_vmap_range It broke the 'allmodconfig' build. fs/xfs/xfs_buf.c: In function 'xfs_buf_bio_end_io': fs/xfs/xfs_buf.c:1242:3: error: implicit declaration of function 'invalidate_kernel_vmap_range' [-Werror=implicit-function-declaration] invalidate_kernel_vmap_range(bp->b_addr, xfs_buf_vmap_len(bp)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ fs/xfs/xfs_buf.c: In function 'xfs_buf_ioapply_map': fs/xfs/xfs_buf.c:1312:4: error: implicit declaration of function 'flush_kernel_vmap_range' [-Werror=implicit-function-declaration] flush_kernel_vmap_range(bp->b_addr, ^~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>

It broke the 'allmodconfig' build. LD vmlinux SYSMAP System.map Building modules, stage 2. MODPOST 5028 modules ERROR: "flush_dcache_page" [net/sunrpc/xprtrdma/rpcrdma.ko] undefined! ERROR: "empty_zero_page" [net/ceph/libceph.ko] undefined! ERROR: "save_stack_trace" [kernel/backtracetest.ko] undefined! ERROR: "clear_page" [fs/ocfs2/dlm/ocfs2_dlm.ko] undefined! ERROR: "copy_page" [fs/nilfs2/nilfs2.ko] undefined! ... Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>

It broke the 'allmodconfig' build. We need to include <linux/types.h> to make sure the type is defined before using it. Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>

… trace_hardirqs_off. It broke the 'allmodconfig' build when CONFIG_TRACE_IRQFLAGS is enabled. Signed-off-by: Nick Chun-Ming Hu <nickhu@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>

…IAN is default y This way we can build kernel with CONFIG_CPU_LITTLE_ENDIAN=y. Build allmodconfig and allnoconfig are available too. It also fixes the endian mismatch issue because AFLAGS and LDFLAGS is not passed correctly. Signed-off-by: Vincent Ren-Wei Chen <vincentc@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>

We use tlbop to map virtual address in the first beginning, however it may map too much if DRAM size is not that big. We have to invalidate the mapping when the page table is created. Signed-off-by: Greentime Hu <greentime@andestech.com>

Refine readability of INT_MASK_INITAIAL_VAL with meaningful macro instead of magic number. Signed-off-by: Greentime Hu <greentime@andestech.com>

…lity of NTC The nds32 architecture will use physical memory when interrupt or exception comes and it will use the setting of NTC0-4. The original implementation didn't consider the DRAM start address may start from 1GB, 2GB or 3GB to cause this issue. It will write the data to DRAM if it is running in physical address however kernel will read the data with virtaul address through data cache. In this case, the data of DRAM is latest. This fix will set the correct cacheability to let kernel write/read the latest data in cache instead of DRAM. Signed-off-by: Greentime Hu <greentime@andestech.com>

Change the name of the file '/proc/sys/nds32/unaligned_acess' to '/proc/sys/nds32/unaligned_access' Signed-off-by: Nickhu <nickhu@andestech.com> Reviewed-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>

If the kernel config 'CONFIG_ALIGNMENT_TRAP' and the file '/proc/sys/nds32/unaligned_access/enable' are set, the kernel unaligned access handler does not handle correctly when the value of immediate field is negative. This commit fixes the unaligned access handler in kernel. Signed-off-by: Nickhu <nickhu@andestech.com> Reviewed-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>

[ cmllamas: clean forward port from commit 015ac18 ("binder: fix UAF of alloc->vma in race with munmap()") in 5.10 stable. It is needed in mainline after the revert of commit a43cfc8 ("android: binder: stop saving a pointer to the VMA") as pointed out by Liam. The commit log and tags have been tweaked to reflect this. ] In commit 720c241 ("ANDROID: binder: change down_write to down_read") binder assumed the mmap read lock is sufficient to protect alloc->vma inside binder_update_page_range(). This used to be accurate until commit dd2283f ("mm: mmap: zap pages with read mmap_sem in munmap"), which now downgrades the mmap_lock after detaching the vma from the rbtree in munmap(). Then it proceeds to teardown and free the vma with only the read lock held. This means that accesses to alloc->vma in binder_update_page_range() now will race with vm_area_free() in munmap() and can cause a UAF as shown in the following KASAN trace: ================================================================== BUG: KASAN: use-after-free in vm_insert_page+0x7c/0x1f0 Read of size 8 at addr ffff16204ad00600 by task server/558 CPU: 3 PID: 558 Comm: server Not tainted 5.10.150-00001-gdc8dcf942daa #1 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2a0 show_stack+0x18/0x2c dump_stack+0xf8/0x164 print_address_description.constprop.0+0x9c/0x538 kasan_report+0x120/0x200 __asan_load8+0xa0/0xc4 vm_insert_page+0x7c/0x1f0 binder_update_page_range+0x278/0x50c binder_alloc_new_buf+0x3f0/0xba0 binder_transaction+0x64c/0x3040 binder_thread_write+0x924/0x2020 binder_ioctl+0x1610/0x2e5c __arm64_sys_ioctl+0xd4/0x120 el0_svc_common.constprop.0+0xac/0x270 do_el0_svc+0x38/0xa0 el0_svc+0x1c/0x2c el0_sync_handler+0xe8/0x114 el0_sync+0x180/0x1c0 Allocated by task 559: kasan_save_stack+0x38/0x6c __kasan_kmalloc.constprop.0+0xe4/0xf0 kasan_slab_alloc+0x18/0x2c kmem_cache_alloc+0x1b0/0x2d0 vm_area_alloc+0x28/0x94 mmap_region+0x378/0x920 do_mmap+0x3f0/0x600 vm_mmap_pgoff+0x150/0x17c ksys_mmap_pgoff+0x284/0x2dc __arm64_sys_mmap+0x84/0xa4 el0_svc_common.constprop.0+0xac/0x270 do_el0_svc+0x38/0xa0 el0_svc+0x1c/0x2c el0_sync_handler+0xe8/0x114 el0_sync+0x180/0x1c0 Freed by task 560: kasan_save_stack+0x38/0x6c kasan_set_track+0x28/0x40 kasan_set_free_info+0x24/0x4c __kasan_slab_free+0x100/0x164 kasan_slab_free+0x14/0x20 kmem_cache_free+0xc4/0x34c vm_area_free+0x1c/0x2c remove_vma+0x7c/0x94 __do_munmap+0x358/0x710 __vm_munmap+0xbc/0x130 __arm64_sys_munmap+0x4c/0x64 el0_svc_common.constprop.0+0xac/0x270 do_el0_svc+0x38/0xa0 el0_svc+0x1c/0x2c el0_sync_handler+0xe8/0x114 el0_sync+0x180/0x1c0 [...] ================================================================== To prevent the race above, revert back to taking the mmap write lock inside binder_update_page_range(). One might expect an increase of mmap lock contention. However, binder already serializes these calls via top level alloc->mutex. Also, there was no performance impact shown when running the binder benchmark tests. Fixes: c0fd210 ("Revert "android: binder: stop saving a pointer to the VMA"") Fixes: dd2283f ("mm: mmap: zap pages with read mmap_sem in munmap") Reported-by: Jann Horn <jannh@google.com> Closes: https://lore.kernel.org/all/20230518144052.xkj6vmddccq4v66b@revolver Cc: <stable@vger.kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Liam Howlett <liam.howlett@oracle.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Acked-by: Todd Kjos <tkjos@google.com> Link: https://lore.kernel.org/r/20230519195950.1775656-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 1e8fed8 ("powerpc: drop ranges for definition of ARCH_FORCE_MAX_ORDER") removed the limits on the possible values for ARCH_FORCE_MAX_ORDER. However removing the ranges entirely causes some common work flows to break. For example building a defconfig (which uses 64K pages), changing the page size to 4K, and rebuilding used to work, because ARCH_FORCE_MAX_ORDER would be clamped to 12 by the ranges. With the ranges removed it creates a kernel that builds but crashes at boot: kernel BUG at mm/huge_memory.c:470! Oops: Exception in kernel mode, sig: 5 [#1] ... NIP hugepage_init+0x9c/0x278 LR do_one_initcall+0x80/0x320 Call Trace: do_one_initcall+0x80/0x320 kernel_init_freeable+0x304/0x3ac kernel_init+0x30/0x1a0 ret_from_kernel_user_thread+0x14/0x1c The reasoning for removing the ranges was that some of the values were too large. So take that into account and limit the maximums to 10 which is the default max, except for the 4K case which uses 12. Fixes: 1e8fed8 ("powerpc: drop ranges for definition of ARCH_FORCE_MAX_ORDER") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230519113806.370635-1-mpe@ellerman.id.au

In case user switch a device from switchdev mode to legacy mode, mlx5 first unpair the E-switch and afterwards unload the uplink vport. From the other hand, in case user remove or reload a device, mlx5 first unload the uplink vport and afterwards unpair the E-switch. The latter is causing a bug[1], hence, handle pairing of E-switch as part of uplink un/load APIs. [1] In case VF_LAG is used, every tc fdb flow is duplicated to the peer esw. However, the original esw keeps a pointer to this duplicated flow, not the peer esw. e.g.: if user create tc fdb flow over esw0, the flow is duplicated over esw1, in FW/HW, but in SW, esw0 keeps a pointer to the duplicated flow. During module unload while a peer tc fdb flow is still offloaded, in case the first device to be removed is the peer device (esw1 in the example above), the peer net-dev is destroyed, and so the mlx5e_priv is memset to 0. Afterwards, the peer device is trying to unpair himself from the original device (esw0 in the example above). Unpair API invoke the original device to clear peer flow from its eswitch (esw0), but the peer flow, which is stored over the original eswitch (esw0), is trying to use the peer mlx5e_priv, which is memset to 0 and result in bellow kernel-oops. [ 157.964081 ] BUG: unable to handle page fault for address: 000000000002ce60 [ 157.964662 ] #PF: supervisor read access in kernel mode [ 157.965123 ] #PF: error_code(0x0000) - not-present page [ 157.965582 ] PGD 0 P4D 0 [ 157.965866 ] Oops: 0000 [#1] SMP [ 157.967670 ] RIP: 0010:mlx5e_tc_del_fdb_flow+0x48/0x460 [mlx5_core] [ 157.976164 ] Call Trace: [ 157.976437 ] <TASK> [ 157.976690 ] __mlx5e_tc_del_fdb_peer_flow+0xe6/0x100 [mlx5_core] [ 157.977230 ] mlx5e_tc_clean_fdb_peer_flows+0x67/0x90 [mlx5_core] [ 157.977767 ] mlx5_esw_offloads_unpair+0x2d/0x1e0 [mlx5_core] [ 157.984653 ] mlx5_esw_offloads_devcom_event+0xbf/0x130 [mlx5_core] [ 157.985212 ] mlx5_devcom_send_event+0xa3/0xb0 [mlx5_core] [ 157.985714 ] esw_offloads_disable+0x5a/0x110 [mlx5_core] [ 157.986209 ] mlx5_eswitch_disable_locked+0x152/0x170 [mlx5_core] [ 157.986757 ] mlx5_eswitch_disable+0x51/0x80 [mlx5_core] [ 157.987248 ] mlx5_unload+0x2a/0xb0 [mlx5_core] [ 157.987678 ] mlx5_uninit_one+0x5f/0xd0 [mlx5_core] [ 157.988127 ] remove_one+0x64/0xe0 [mlx5_core] [ 157.988549 ] pci_device_remove+0x31/0xa0 [ 157.988933 ] device_release_driver_internal+0x18f/0x1f0 [ 157.989402 ] driver_detach+0x3f/0x80 [ 157.989754 ] bus_remove_driver+0x70/0xf0 [ 157.990129 ] pci_unregister_driver+0x34/0x90 [ 157.990537 ] mlx5_cleanup+0xc/0x1c [mlx5_core] [ 157.990972 ] __x64_sys_delete_module+0x15a/0x250 [ 157.991398 ] ? exit_to_user_mode_prepare+0xea/0x110 [ 157.991840 ] do_syscall_64+0x3d/0x90 [ 157.992198 ] entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: 04de7dd ("net/mlx5e: Infrastructure for duplicated offloading of TC flows") Fixes: 1418ddd ("net/mlx5e: Duplicate offloaded TC eswitch rules under uplink LAG") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Cited commit causes ABBA deadlock[0] when peer flows are created while holding the devcom rw semaphore. Due to peer flows offload implementation the lock is taken much higher up the call chain and there is no obvious way to easily fix the deadlock. Instead, since tc route query code needs the peer eswitch structure only to perform a lookup in xarray and doesn't perform any sleeping operations with it, refactor the code for lockless execution in following ways: - RCUify the devcom 'data' pointer. When resetting the pointer synchronously wait for RCU grace period before returning. This is fine since devcom is currently only used for synchronization of pairing/unpairing of eswitches which is rare and already expensive as-is. - Wrap all usages of 'paired' boolean in {READ|WRITE}_ONCE(). The flag has already been used in some unlocked contexts without proper annotations (e.g. users of mlx5_devcom_is_paired() function), but it wasn't an issue since all relevant code paths checked it again after obtaining the devcom semaphore. Now it is also used by mlx5_devcom_get_peer_data_rcu() as "best effort" check to return NULL when devcom is being unpaired. Note that while RCU read lock doesn't prevent the unpaired flag from being changed concurrently it still guarantees that reader can continue to use 'data'. - Refactor mlx5e_tc_query_route_vport() function to use new mlx5_devcom_get_peer_data_rcu() API which fixes the deadlock. [0]: [ 164.599612] ====================================================== [ 164.600142] WARNING: possible circular locking dependency detected [ 164.600667] 6.3.0-rc3+ #1 Not tainted [ 164.601021] ------------------------------------------------------ [ 164.601557] handler1/3456 is trying to acquire lock: [ 164.601998] ffff88811f1714b0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}, at: mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.603078] but task is already holding lock: [ 164.603617] ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.604459] which lock already depends on the new lock. [ 164.605190] the existing dependency chain (in reverse order) is: [ 164.605848] -> #1 (&comp->sem){++++}-{3:3}: [ 164.606380] down_read+0x39/0x50 [ 164.606772] mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.607336] mlx5e_tc_query_route_vport+0x86/0xc0 [mlx5_core] [ 164.607914] mlx5e_tc_tun_route_lookup+0x1a4/0x1d0 [mlx5_core] [ 164.608495] mlx5e_attach_decap_route+0xc6/0x1e0 [mlx5_core] [ 164.609063] mlx5e_tc_add_fdb_flow+0x1ea/0x360 [mlx5_core] [ 164.609627] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.610175] mlx5e_configure_flower+0x952/0x1a20 [mlx5_core] [ 164.610741] tc_setup_cb_add+0xd4/0x200 [ 164.611146] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.611661] fl_change+0xc95/0x18a0 [cls_flower] [ 164.612116] tc_new_tfilter+0x3fc/0xd20 [ 164.612516] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.612936] netlink_rcv_skb+0x54/0x100 [ 164.613339] netlink_unicast+0x190/0x250 [ 164.613746] netlink_sendmsg+0x245/0x4a0 [ 164.614150] sock_sendmsg+0x38/0x60 [ 164.614522] ____sys_sendmsg+0x1d0/0x1e0 [ 164.614934] ___sys_sendmsg+0x80/0xc0 [ 164.615320] __sys_sendmsg+0x51/0x90 [ 164.615701] do_syscall_64+0x3d/0x90 [ 164.616083] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.616568] -> #0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}: [ 164.617210] __lock_acquire+0x159e/0x26e0 [ 164.617638] lock_acquire+0xc2/0x2a0 [ 164.618018] __mutex_lock+0x92/0xcd0 [ 164.618401] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.618943] post_process_attr+0x153/0x2d0 [mlx5_core] [ 164.619471] mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core] [ 164.620021] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.620564] mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core] [ 164.621125] tc_setup_cb_add+0xd4/0x200 [ 164.621531] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.622047] fl_change+0xc95/0x18a0 [cls_flower] [ 164.622500] tc_new_tfilter+0x3fc/0xd20 [ 164.622906] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.623324] netlink_rcv_skb+0x54/0x100 [ 164.623727] netlink_unicast+0x190/0x250 [ 164.624138] netlink_sendmsg+0x245/0x4a0 [ 164.624544] sock_sendmsg+0x38/0x60 [ 164.624919] ____sys_sendmsg+0x1d0/0x1e0 [ 164.625340] ___sys_sendmsg+0x80/0xc0 [ 164.625731] __sys_sendmsg+0x51/0x90 [ 164.626117] do_syscall_64+0x3d/0x90 [ 164.626502] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.626995] other info that might help us debug this: [ 164.627725] Possible unsafe locking scenario: [ 164.628268] CPU0 CPU1 [ 164.628683] ---- ---- [ 164.629098] lock(&comp->sem); [ 164.629421] lock(&esw->offloads.encap_tbl_lock); [ 164.630066] lock(&comp->sem); [ 164.630555] lock(&esw->offloads.encap_tbl_lock); [ 164.630993] *** DEADLOCK *** [ 164.631575] 3 locks held by handler1/3456: [ 164.631962] #0: ffff888124b75130 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200 [ 164.632703] #1: ffff888116e512b8 (&esw->mode_lock){++++}-{3:3}, at: mlx5_esw_hold+0x39/0x50 [mlx5_core] [ 164.633552] thesofproject#2: ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.634435] stack backtrace: [ 164.634883] CPU: 17 PID: 3456 Comm: handler1 Not tainted 6.3.0-rc3+ #1 [ 164.635431] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 164.636340] Call Trace: [ 164.636616] <TASK> [ 164.636863] dump_stack_lvl+0x47/0x70 [ 164.637217] check_noncircular+0xfe/0x110 [ 164.637601] __lock_acquire+0x159e/0x26e0 [ 164.637977] ? mlx5_cmd_set_fte+0x5b0/0x830 [mlx5_core] [ 164.638472] lock_acquire+0xc2/0x2a0 [ 164.638828] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.639339] ? lock_is_held_type+0x98/0x110 [ 164.639728] __mutex_lock+0x92/0xcd0 [ 164.640074] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.640576] ? __lock_acquire+0x382/0x26e0 [ 164.640958] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.641468] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.641965] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.642454] ? lock_release+0xbf/0x240 [ 164.642819] post_process_attr+0x153/0x2d0 [mlx5_core] [ 164.643318] mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core] [ 164.643835] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.644340] mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core] [ 164.644862] ? lock_acquire+0xc2/0x2a0 [ 164.645219] tc_setup_cb_add+0xd4/0x200 [ 164.645588] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.646067] fl_change+0xc95/0x18a0 [cls_flower] [ 164.646488] tc_new_tfilter+0x3fc/0xd20 [ 164.646861] ? tc_del_tfilter+0x810/0x810 [ 164.647236] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.647621] ? rtnl_setlink+0x160/0x160 [ 164.647982] netlink_rcv_skb+0x54/0x100 [ 164.648348] netlink_unicast+0x190/0x250 [ 164.648722] netlink_sendmsg+0x245/0x4a0 [ 164.649090] sock_sendmsg+0x38/0x60 [ 164.649434] ____sys_sendmsg+0x1d0/0x1e0 [ 164.649804] ? copy_msghdr_from_user+0x6d/0xa0 [ 164.650213] ___sys_sendmsg+0x80/0xc0 [ 164.650563] ? lock_acquire+0xc2/0x2a0 [ 164.650926] ? lock_acquire+0xc2/0x2a0 [ 164.651286] ? __fget_files+0x5/0x190 [ 164.651644] ? find_held_lock+0x2b/0x80 [ 164.652006] ? __fget_files+0xb9/0x190 [ 164.652365] ? lock_release+0xbf/0x240 [ 164.652723] ? __fget_files+0xd3/0x190 [ 164.653079] __sys_sendmsg+0x51/0x90 [ 164.653435] do_syscall_64+0x3d/0x90 [ 164.653784] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.654229] RIP: 0033:0x7f378054f8bd [ 164.654577] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 6a c3 f4 ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 be c3 f4 ff 48 [ 164.656041] RSP: 002b:00007f377fa114b0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 164.656701] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f378054f8bd [ 164.657297] RDX: 0000000000000000 RSI: 00007f377fa11540 RDI: 0000000000000014 [ 164.657885] RBP: 00007f377fa12278 R08: 0000000000000000 R09: 000000000000015c [ 164.658472] R10: 00007f377fa123d0 R11: 0000000000000293 R12: 0000560962d99bd0 [ 164.665317] R13: 0000000000000000 R14: 0000560962d99bd0 R15: 00007f377fa11540 Fixes: f9d196b ("net/mlx5e: Use correct eswitch for stack devices with lag") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Cited patch is using the eswitch object mapping pool while in nic mode where it isn't initialized. This results in the trace below [0]. Fix that by using either nic or eswitch object mapping pool depending if eswitch is enabled or not. [0]: [ 826.446057] ================================================================== [ 826.446729] BUG: KASAN: slab-use-after-free in mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.447515] Read of size 8 at addr ffff888194485830 by task tc/6233 [ 826.448243] CPU: 16 PID: 6233 Comm: tc Tainted: G W 6.3.0-rc6+ #1 [ 826.448890] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 826.449785] Call Trace: [ 826.450052] <TASK> [ 826.450302] dump_stack_lvl+0x33/0x50 [ 826.450650] print_report+0xc2/0x610 [ 826.450998] ? __virt_addr_valid+0xb1/0x130 [ 826.451385] ? mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.451935] kasan_report+0xae/0xe0 [ 826.452276] ? mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.452829] mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.453368] ? __kmalloc_node+0x5a/0x120 [ 826.453733] esw_add_restore_rule+0x20f/0x270 [mlx5_core] [ 826.454288] ? mlx5_eswitch_add_send_to_vport_meta_rule+0x260/0x260 [mlx5_core] [ 826.455011] ? mutex_unlock+0x80/0xd0 [ 826.455361] ? __mutex_unlock_slowpath.constprop.0+0x210/0x210 [ 826.455862] ? mapping_add+0x2cb/0x440 [mlx5_core] [ 826.456425] mlx5e_tc_action_miss_mapping_get+0x139/0x180 [mlx5_core] [ 826.457058] ? mlx5e_tc_update_skb_nic+0xb0/0xb0 [mlx5_core] [ 826.457636] ? __kasan_kmalloc+0x77/0x90 [ 826.458000] ? __kmalloc+0x57/0x120 [ 826.458336] mlx5_tc_ct_flow_offload+0x325/0xe40 [mlx5_core] [ 826.458916] ? ct_kernel_enter.constprop.0+0x48/0xa0 [ 826.459360] ? mlx5_tc_ct_parse_action+0xf0/0xf0 [mlx5_core] [ 826.459933] ? mlx5e_mod_hdr_attach+0x491/0x520 [mlx5_core] [ 826.460507] ? mlx5e_mod_hdr_get+0x12/0x20 [mlx5_core] [ 826.461046] ? mlx5e_tc_attach_mod_hdr+0x154/0x170 [mlx5_core] [ 826.461635] mlx5e_configure_flower+0x969/0x2110 [mlx5_core] [ 826.462217] ? _raw_spin_lock_bh+0x85/0xe0 [ 826.462597] ? __mlx5e_add_fdb_flow+0x750/0x750 [mlx5_core] [ 826.463163] ? kasan_save_stack+0x2e/0x40 [ 826.463534] ? down_read+0x115/0x1b0 [ 826.463878] ? down_write_killable+0x110/0x110 [ 826.464288] ? tc_setup_action.part.0+0x9f/0x3b0 [ 826.464701] ? mlx5e_is_uplink_rep+0x4c/0x90 [mlx5_core] [ 826.465253] ? mlx5e_tc_reoffload_flows_work+0x130/0x130 [mlx5_core] [ 826.465878] tc_setup_cb_add+0x112/0x250 [ 826.466247] fl_hw_replace_filter+0x230/0x310 [cls_flower] [ 826.466724] ? fl_hw_destroy_filter+0x1a0/0x1a0 [cls_flower] [ 826.467212] fl_change+0x14e1/0x2030 [cls_flower] [ 826.467636] ? sock_def_readable+0x89/0x120 [ 826.468019] ? fl_tmplt_create+0x2d0/0x2d0 [cls_flower] [ 826.468509] ? kasan_unpoison+0x23/0x50 [ 826.468873] ? get_random_u16+0x180/0x180 [ 826.469244] ? __radix_tree_lookup+0x2b/0x130 [ 826.469640] ? fl_get+0x7b/0x140 [cls_flower] [ 826.470042] ? fl_mask_put+0x200/0x200 [cls_flower] [ 826.470478] ? __mutex_unlock_slowpath.constprop.0+0x210/0x210 [ 826.470973] ? fl_tmplt_create+0x2d0/0x2d0 [cls_flower] [ 826.471427] tc_new_tfilter+0x644/0x1050 [ 826.471795] ? tc_get_tfilter+0x860/0x860 [ 826.472170] ? __thaw_task+0x130/0x130 [ 826.472525] ? arch_stack_walk+0x98/0xf0 [ 826.472892] ? cap_capable+0x9f/0xd0 [ 826.473235] ? security_capable+0x47/0x60 [ 826.473608] rtnetlink_rcv_msg+0x1d5/0x550 [ 826.473985] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 826.474383] ? __stack_depot_save+0x35/0x4c0 [ 826.474779] ? kasan_save_stack+0x2e/0x40 [ 826.475149] ? kasan_save_stack+0x1e/0x40 [ 826.475518] ? __kasan_record_aux_stack+0x9f/0xb0 [ 826.475939] ? task_work_add+0x77/0x1c0 [ 826.476305] netlink_rcv_skb+0xe0/0x210 [ 826.476661] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 826.477057] ? netlink_ack+0x7c0/0x7c0 [ 826.477412] ? rhashtable_jhash2+0xef/0x150 [ 826.477796] ? _copy_from_iter+0x105/0x770 [ 826.484386] netlink_unicast+0x346/0x490 [ 826.484755] ? netlink_attachskb+0x400/0x400 [ 826.485145] ? kernel_text_address+0xc2/0xd0 [ 826.485535] netlink_sendmsg+0x3b0/0x6c0 [ 826.485902] ? kernel_text_address+0xc2/0xd0 [ 826.486296] ? netlink_unicast+0x490/0x490 [ 826.486671] ? iovec_from_user.part.0+0x7a/0x1a0 [ 826.487083] ? netlink_unicast+0x490/0x490 [ 826.487461] sock_sendmsg+0x73/0xc0 [ 826.487803] ____sys_sendmsg+0x364/0x380 [ 826.488186] ? import_iovec+0x7/0x10 [ 826.488531] ? kernel_sendmsg+0x30/0x30 [ 826.488893] ? __copy_msghdr+0x180/0x180 [ 826.489258] ? kasan_save_stack+0x2e/0x40 [ 826.489629] ? kasan_save_stack+0x1e/0x40 [ 826.490002] ? __kasan_record_aux_stack+0x9f/0xb0 [ 826.490424] ? __call_rcu_common.constprop.0+0x46/0x580 [ 826.490876] ___sys_sendmsg+0xdf/0x140 [ 826.491231] ? copy_msghdr_from_user+0x110/0x110 [ 826.491649] ? fget_raw+0x120/0x120 [ 826.491988] ? ___sys_recvmsg+0xd9/0x130 [ 826.492355] ? folio_batch_add_and_move+0x80/0xa0 [ 826.492776] ? _raw_spin_lock+0x7a/0xd0 [ 826.493137] ? _raw_spin_lock+0x7a/0xd0 [ 826.493500] ? _raw_read_lock_irq+0x30/0x30 [ 826.493880] ? kasan_set_track+0x21/0x30 [ 826.494249] ? kasan_save_free_info+0x2a/0x40 [ 826.494650] ? do_sys_openat2+0xff/0x270 [ 826.495016] ? __fget_light+0x1b5/0x200 [ 826.495377] ? __virt_addr_valid+0xb1/0x130 [ 826.495763] __sys_sendmsg+0xb2/0x130 [ 826.496118] ? __sys_sendmsg_sock+0x20/0x20 [ 826.496501] ? __x64_sys_rseq+0x2e0/0x2e0 [ 826.496874] ? do_user_addr_fault+0x276/0x820 [ 826.497273] ? fpregs_assert_state_consistent+0x52/0x60 [ 826.497727] ? exit_to_user_mode_prepare+0x30/0x120 [ 826.498158] do_syscall_64+0x3d/0x90 [ 826.498502] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.498949] RIP: 0033:0x7f9b67f4f887 [ 826.499294] Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 826.500742] RSP: 002b:00007fff5d1a5498 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 826.501395] RAX: ffffffffffffffda RBX: 0000000064413ce6 RCX: 00007f9b67f4f887 [ 826.501975] RDX: 0000000000000000 RSI: 00007fff5d1a5500 RDI: 0000000000000003 [ 826.502556] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 [ 826.503135] R10: 00007f9b67e08708 R11: 0000000000000246 R12: 0000000000000001 [ 826.503714] R13: 0000000000000001 R14: 00007fff5d1a9800 R15: 0000000000485400 [ 826.504304] </TASK> [ 826.504753] Allocated by task 3764: [ 826.505090] kasan_save_stack+0x1e/0x40 [ 826.505453] kasan_set_track+0x21/0x30 [ 826.505810] __kasan_kmalloc+0x77/0x90 [ 826.506164] __mlx5_create_flow_table+0x16d/0xbb0 [mlx5_core] [ 826.506742] esw_offloads_enable+0x60d/0xfb0 [mlx5_core] [ 826.507292] mlx5_eswitch_enable_locked+0x4d3/0x680 [mlx5_core] [ 826.507885] mlx5_devlink_eswitch_mode_set+0x2a3/0x580 [mlx5_core] [ 826.508513] devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0 [ 826.508969] genl_family_rcv_msg_doit.isra.0+0x146/0x1c0 [ 826.509427] genl_rcv_msg+0x28d/0x3e0 [ 826.509772] netlink_rcv_skb+0xe0/0x210 [ 826.510133] genl_rcv+0x24/0x40 [ 826.510448] netlink_unicast+0x346/0x490 [ 826.510810] netlink_sendmsg+0x3b0/0x6c0 [ 826.511179] sock_sendmsg+0x73/0xc0 [ 826.511519] __sys_sendto+0x18d/0x220 [ 826.511867] __x64_sys_sendto+0x72/0x80 [ 826.512232] do_syscall_64+0x3d/0x90 [ 826.512576] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.513220] Freed by task 5674: [ 826.513535] kasan_save_stack+0x1e/0x40 [ 826.513893] kasan_set_track+0x21/0x30 [ 826.514245] kasan_save_free_info+0x2a/0x40 [ 826.514629] ____kasan_slab_free+0x11a/0x1b0 [ 826.515021] __kmem_cache_free+0x14d/0x280 [ 826.515399] tree_put_node+0x109/0x1c0 [mlx5_core] [ 826.515907] mlx5_destroy_flow_table+0x119/0x630 [mlx5_core] [ 826.516481] esw_offloads_steering_cleanup+0xe7/0x150 [mlx5_core] [ 826.517084] esw_offloads_disable+0xe0/0x160 [mlx5_core] [ 826.517632] mlx5_eswitch_disable_locked+0x26c/0x290 [mlx5_core] [ 826.518225] mlx5_devlink_eswitch_mode_set+0x128/0x580 [mlx5_core] [ 826.518834] devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0 [ 826.519286] genl_family_rcv_msg_doit.isra.0+0x146/0x1c0 [ 826.519748] genl_rcv_msg+0x28d/0x3e0 [ 826.520101] netlink_rcv_skb+0xe0/0x210 [ 826.520458] genl_rcv+0x24/0x40 [ 826.520771] netlink_unicast+0x346/0x490 [ 826.521137] netlink_sendmsg+0x3b0/0x6c0 [ 826.521505] sock_sendmsg+0x73/0xc0 [ 826.521842] __sys_sendto+0x18d/0x220 [ 826.522191] __x64_sys_sendto+0x72/0x80 [ 826.522554] do_syscall_64+0x3d/0x90 [ 826.522894] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.523540] Last potentially related work creation: [ 826.523969] kasan_save_stack+0x1e/0x40 [ 826.524331] __kasan_record_aux_stack+0x9f/0xb0 [ 826.524739] insert_work+0x30/0x130 [ 826.525078] __queue_work+0x34b/0x690 [ 826.525426] queue_work_on+0x48/0x50 [ 826.525766] __rhashtable_remove_fast_one+0x4af/0x4d0 [mlx5_core] [ 826.526365] del_sw_flow_group+0x1b5/0x270 [mlx5_core] [ 826.526898] tree_put_node+0x109/0x1c0 [mlx5_core] [ 826.527407] esw_offloads_steering_cleanup+0xd3/0x150 [mlx5_core] [ 826.528009] esw_offloads_disable+0xe0/0x160 [mlx5_core] [ 826.528616] mlx5_eswitch_disable_locked+0x26c/0x290 [mlx5_core] [ 826.529218] mlx5_devlink_eswitch_mode_set+0x128/0x580 [mlx5_core] [ 826.529823] devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0 [ 826.530276] genl_family_rcv_msg_doit.isra.0+0x146/0x1c0 [ 826.530733] genl_rcv_msg+0x28d/0x3e0 [ 826.531079] netlink_rcv_skb+0xe0/0x210 [ 826.531439] genl_rcv+0x24/0x40 [ 826.531755] netlink_unicast+0x346/0x490 [ 826.532123] netlink_sendmsg+0x3b0/0x6c0 [ 826.532487] sock_sendmsg+0x73/0xc0 [ 826.532825] __sys_sendto+0x18d/0x220 [ 826.533175] __x64_sys_sendto+0x72/0x80 [ 826.533533] do_syscall_64+0x3d/0x90 [ 826.533877] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.534521] The buggy address belongs to the object at ffff888194485800 which belongs to the cache kmalloc-512 of size 512 [ 826.535506] The buggy address is located 48 bytes inside of freed 512-byte region [ffff888194485800, ffff888194485a00) [ 826.536666] The buggy address belongs to the physical page: [ 826.537138] page:00000000d75841dd refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x194480 [ 826.537915] head:00000000d75841dd order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 826.538595] flags: 0x200000000010200(slab|head|node=0|zone=2) [ 826.539089] raw: 0200000000010200 ffff888100042c80 ffffea0004523800 dead000000000002 [ 826.539755] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 [ 826.540417] page dumped because: kasan: bad access detected [ 826.541095] Memory state around the buggy address: [ 826.541519] ffff888194485700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 826.542149] ffff888194485780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 826.542773] >ffff888194485800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 826.543400] ^ [ 826.543822] ffff888194485880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 826.544452] ffff888194485900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 826.545079] ================================================================== Fixes: 6702782 ("net/mlx5e: TC, Set CT miss to the specific ct action instance") Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Whenever a shutdown is invoked, free irqs only and keep mlx5_irq synthetic wrapper intact in order to avoid use-after-free on system shutdown. for example: ================================================================== BUG: KASAN: use-after-free in _find_first_bit+0x66/0x80 Read of size 8 at addr ffff88823fc0d318 by task kworker/u192:0/13608 CPU: 25 PID: 13608 Comm: kworker/u192:0 Tainted: G B W O 6.1.21-cloudflare-kasan-2023.3.21 #1 Hardware name: GIGABYTE R162-R2-GEN0/MZ12-HD2-CD, BIOS R14 05/03/2021 Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x34/0x48 print_report+0x170/0x473 ? _find_first_bit+0x66/0x80 kasan_report+0xad/0x130 ? _find_first_bit+0x66/0x80 _find_first_bit+0x66/0x80 mlx5e_open_channels+0x3c5/0x3a10 [mlx5_core] ? console_unlock+0x2fa/0x430 ? _raw_spin_lock_irqsave+0x8d/0xf0 ? _raw_spin_unlock_irqrestore+0x42/0x80 ? preempt_count_add+0x7d/0x150 ? __wake_up_klogd.part.0+0x7d/0xc0 ? vprintk_emit+0xfe/0x2c0 ? mlx5e_trigger_napi_sched+0x40/0x40 [mlx5_core] ? dev_attr_show.cold+0x35/0x35 ? devlink_health_do_dump.part.0+0x174/0x340 ? devlink_health_report+0x504/0x810 ? mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core] ? mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core] ? process_one_work+0x680/0x1050 mlx5e_safe_switch_params+0x156/0x220 [mlx5_core] ? mlx5e_switch_priv_channels+0x310/0x310 [mlx5_core] ? mlx5_eq_poll_irq_disabled+0xb6/0x100 [mlx5_core] mlx5e_tx_reporter_timeout_recover+0x123/0x240 [mlx5_core] ? __mutex_unlock_slowpath.constprop.0+0x2b0/0x2b0 devlink_health_reporter_recover+0xa6/0x1f0 devlink_health_report+0x2f7/0x810 ? vsnprintf+0x854/0x15e0 mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core] ? mlx5e_reporter_tx_err_cqe+0x1a0/0x1a0 [mlx5_core] ? mlx5e_tx_reporter_timeout_dump+0x50/0x50 [mlx5_core] ? mlx5e_tx_reporter_dump_sq+0x260/0x260 [mlx5_core] ? newidle_balance+0x9b7/0xe30 ? psi_group_change+0x6a7/0xb80 ? mutex_lock+0x96/0xf0 ? __mutex_lock_slowpath+0x10/0x10 mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core] process_one_work+0x680/0x1050 worker_thread+0x5a0/0xeb0 ? process_one_work+0x1050/0x1050 kthread+0x2a2/0x340 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> Freed by task 1: kasan_save_stack+0x23/0x50 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 ____kasan_slab_free+0x169/0x1d0 slab_free_freelist_hook+0xd2/0x190 __kmem_cache_free+0x1a1/0x2f0 irq_pool_free+0x138/0x200 [mlx5_core] mlx5_irq_table_destroy+0xf6/0x170 [mlx5_core] mlx5_core_eq_free_irqs+0x74/0xf0 [mlx5_core] shutdown+0x194/0x1aa [mlx5_core] pci_device_shutdown+0x75/0x120 device_shutdown+0x35c/0x620 kernel_restart+0x60/0xa0 __do_sys_reboot+0x1cb/0x2c0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x4b/0xb5 The buggy address belongs to the object at ffff88823fc0d300 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 24 bytes inside of 192-byte region [ffff88823fc0d300, ffff88823fc0d3c0) The buggy address belongs to the physical page: page:0000000010139587 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x23fc0c head:0000000010139587 order:1 compound_mapcount:0 compound_pincount:0 flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff) raw: 002ffff800010200 0000000000000000 dead000000000122 ffff88810004ca00 raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88823fc0d200: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88823fc0d280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc >ffff88823fc0d300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88823fc0d380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff88823fc0d400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== general protection fault, probably for non-canonical address 0xdffffc005c40d7ac: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: probably user-memory-access in range [0x00000002e206bd60-0x00000002e206bd67] CPU: 25 PID: 13608 Comm: kworker/u192:0 Tainted: G B W O 6.1.21-cloudflare-kasan-2023.3.21 #1 Hardware name: GIGABYTE R162-R2-GEN0/MZ12-HD2-CD, BIOS R14 05/03/2021 Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core] RIP: 0010:__alloc_pages+0x141/0x5c0 Call Trace: <TASK> ? sysvec_apic_timer_interrupt+0xa0/0xc0 ? asm_sysvec_apic_timer_interrupt+0x16/0x20 ? __alloc_pages_slowpath.constprop.0+0x1ec0/0x1ec0 ? _raw_spin_unlock_irqrestore+0x3d/0x80 __kmalloc_large_node+0x80/0x120 ? kvmalloc_node+0x4e/0x170 __kmalloc_node+0xd4/0x150 kvmalloc_node+0x4e/0x170 mlx5e_open_channels+0x631/0x3a10 [mlx5_core] ? console_unlock+0x2fa/0x430 ? _raw_spin_lock_irqsave+0x8d/0xf0 ? _raw_spin_unlock_irqrestore+0x42/0x80 ? preempt_count_add+0x7d/0x150 ? __wake_up_klogd.part.0+0x7d/0xc0 ? vprintk_emit+0xfe/0x2c0 ? mlx5e_trigger_napi_sched+0x40/0x40 [mlx5_core] ? dev_attr_show.cold+0x35/0x35 ? devlink_health_do_dump.part.0+0x174/0x340 ? devlink_health_report+0x504/0x810 ? mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core] ? mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core] ? process_one_work+0x680/0x1050 mlx5e_safe_switch_params+0x156/0x220 [mlx5_core] ? mlx5e_switch_priv_channels+0x310/0x310 [mlx5_core] ? mlx5_eq_poll_irq_disabled+0xb6/0x100 [mlx5_core] mlx5e_tx_reporter_timeout_recover+0x123/0x240 [mlx5_core] ? __mutex_unlock_slowpath.constprop.0+0x2b0/0x2b0 devlink_health_reporter_recover+0xa6/0x1f0 devlink_health_report+0x2f7/0x810 ? vsnprintf+0x854/0x15e0 mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core] ? mlx5e_reporter_tx_err_cqe+0x1a0/0x1a0 [mlx5_core] ? mlx5e_tx_reporter_timeout_dump+0x50/0x50 [mlx5_core] ? mlx5e_tx_reporter_dump_sq+0x260/0x260 [mlx5_core] ? newidle_balance+0x9b7/0xe30 ? psi_group_change+0x6a7/0xb80 ? mutex_lock+0x96/0xf0 ? __mutex_lock_slowpath+0x10/0x10 mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core] process_one_work+0x680/0x1050 worker_thread+0x5a0/0xeb0 ? process_one_work+0x1050/0x1050 kthread+0x2a2/0x340 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> ---[ end trace 0000000000000000 ]--- RIP: 0010:__alloc_pages+0x141/0x5c0 Code: e0 39 a3 96 89 e9 b8 22 01 32 01 83 e1 0f 48 89 fa 01 c9 48 c1 ea 03 d3 f8 83 e0 03 89 44 24 6c 48 b8 00 00 00 00 00 fc ff df <80> 3c 02 00 0f 85 fc 03 00 00 89 e8 4a 8b 14 f5 e0 39 a3 96 4c 89 RSP: 0018:ffff888251f0f438 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 1ffff1104a3e1e8b RCX: 0000000000000000 RDX: 000000005c40d7ac RSI: 0000000000000003 RDI: 00000002e206bd60 RBP: 0000000000052dc0 R08: ffff8882b0044218 R09: ffff8882b0045e8a R10: fffffbfff300fefc R11: ffff888167af4000 R12: 0000000000000003 R13: 0000000000000000 R14: 00000000696c7070 R15: ffff8882373f4380 FS: 0000000000000000(0000) GS:ffff88bf2be80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005641d031eee8 CR3: 0000002e7ca14000 CR4: 0000000000350ee0 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x11000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]---] Reported-by: Frederick Lawler <fred@cloudflare.com> Link: https://lore.kernel.org/netdev/be5b9271-7507-19c5-ded1-fa78f1980e69@cloudflare.com Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The read_skb hook calls consume_skb() now, but this means that if the recv_actor program wants to use the skb it needs to inc the ref cnt so that the consume_skb() doesn't kfree the sk_buff. This is problematic because in some error cases under memory pressure we may need to linearize the sk_buff from sk_psock_skb_ingress_enqueue(). Then we get this, skb_linearize() __pskb_pull_tail() pskb_expand_head() BUG_ON(skb_shared(skb)) Because we incremented users refcnt from sk_psock_verdict_recv() we hit the bug on with refcnt > 1 and trip it. To fix lets simply pass ownership of the sk_buff through the skb_read call. Then we can drop the consume from read_skb handlers and assume the verdict recv does any required kfree. Bug found while testing in our CI which runs in VMs that hit memory constraints rather regularly. William tested TCP read_skb handlers. [ 106.536188] ------------[ cut here ]------------ [ 106.536197] kernel BUG at net/core/skbuff.c:1693! [ 106.536479] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 106.536726] CPU: 3 PID: 1495 Comm: curl Not tainted 5.19.0-rc5 #1 [ 106.537023] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.16.0-1 04/01/2014 [ 106.537467] RIP: 0010:pskb_expand_head+0x269/0x330 [ 106.538585] RSP: 0018:ffffc90000138b68 EFLAGS: 00010202 [ 106.538839] RAX: 000000000000003f RBX: ffff8881048940e8 RCX: 0000000000000a20 [ 106.539186] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff8881048940e8 [ 106.539529] RBP: ffffc90000138be8 R08: 00000000e161fd1a R09: 0000000000000000 [ 106.539877] R10: 0000000000000018 R11: 0000000000000000 R12: ffff8881048940e8 [ 106.540222] R13: 0000000000000003 R14: 0000000000000000 R15: ffff8881048940e8 [ 106.540568] FS: 00007f277dde9f00(0000) GS:ffff88813bd80000(0000) knlGS:0000000000000000 [ 106.540954] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 106.541227] CR2: 00007f277eeede64 CR3: 000000000ad3e000 CR4: 00000000000006e0 [ 106.541569] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 106.541915] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 106.542255] Call Trace: [ 106.542383] <IRQ> [ 106.542487] __pskb_pull_tail+0x4b/0x3e0 [ 106.542681] skb_ensure_writable+0x85/0xa0 [ 106.542882] sk_skb_pull_data+0x18/0x20 [ 106.543084] bpf_prog_b517a65a242018b0_bpf_skskb_http_verdict+0x3a9/0x4aa9 [ 106.543536] ? migrate_disable+0x66/0x80 [ 106.543871] sk_psock_verdict_recv+0xe2/0x310 [ 106.544258] ? sk_psock_write_space+0x1f0/0x1f0 [ 106.544561] tcp_read_skb+0x7b/0x120 [ 106.544740] tcp_data_queue+0x904/0xee0 [ 106.544931] tcp_rcv_established+0x212/0x7c0 [ 106.545142] tcp_v4_do_rcv+0x174/0x2a0 [ 106.545326] tcp_v4_rcv+0xe70/0xf60 [ 106.545500] ip_protocol_deliver_rcu+0x48/0x290 [ 106.545744] ip_local_deliver_finish+0xa7/0x150 Fixes: 04919be ("tcp: Introduce tcp_read_skb()") Reported-by: William Findlay <will@isovalent.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: William Findlay <will@isovalent.com> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20230523025618.113937-2-john.fastabend@gmail.com

When unloading the spi-mt65xx kernel module during an ongoing spi-mem operation the kernel will Oops shortly after unloading the module. This is because wait_for_completion_timeout was still running and returning into the no longer loaded module: Internal error: Oops: 0000000096000005 [#1] SMP Modules linked in: [many, but spi-mt65xx is no longer there] CPU: 0 PID: 2578 Comm: block Tainted: G W O 6.3.0-next-20230428+ #0 Hardware name: Bananapi BPI-R3 (DT) pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __lock_acquire+0x18c/0x20e8 lr : __lock_acquire+0x9b8/0x20e8 sp : ffffffc009ec3400 x29: ffffffc009ec3400 x28: 0000000000000001 x27: 0000000000000004 x26: ffffff80082888c8 x25: 0000000000000000 x24: 0000000000000000 x23: ffffffc009609da8 x22: ffffff8008288000 x21: ffffff8008288968 x20: 00000000000003c2 x19: ffffff8008be7990 x18: 00000000000002af x17: 0000000000000000 x16: 0000000000000000 x15: ffffffc008d78970 x14: 000000000000080d x13: 00000000000002af x12: 00000000ffffffea x11: 00000000ffffefff x10: ffffffc008dd0970 x9 : ffffffc008d78918 x8 : 0000000000017fe8 x7 : 0000000000000001 x6 : 0000000000000000 x5 : ffffff807fb53910 x4 : 0000000000000000 x3 : 0000000000000027 x2 : 0000000000000027 x1 : 0000000000000000 x0 : 00000000000c03c2 Call trace: __lock_acquire+0x18c/0x20e8 lock_acquire+0x100/0x2a4 _raw_spin_lock_irq+0x58/0x74 __wait_for_common+0xe0/0x1b4 wait_for_completion_timeout+0x1c/0x24 0xffffffc000acc8a4 <--- used to be mtk_spi_transfer_wait spi_mem_exec_op+0x390/0x3ec spi_mem_no_dirmap_read+0x6c/0x88 spi_mem_dirmap_read+0xcc/0x12c spinand_read_page+0xf8/0x1dc spinand_mtd_read+0x1b4/0x2fc mtd_read_oob_std+0x58/0x7c mtd_read_oob+0x8c/0x148 mtd_read+0x50/0x6c ... Prevent this by completing in mtk_spi_remove if needed. Fixes: 9f763fd ("spi: mediatek: add spi memory support for ipm design") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Link: https://lore.kernel.org/r/ZFAF6pJxMu1z6k4w@makrotopia.org Signed-off-by: Mark Brown <broonie@kernel.org>

We may get an empty response with zero length at the beginning of the driver start and get following UBSAN error. Since there is no content(SDRT_NONE) for the response, just return and skip the response handling to avoid this problem. Test pass : SDIO wifi throughput test with this patch [ 126.980684] UBSAN: array-index-out-of-bounds in drivers/mmc/host/vub300.c:1719:12 [ 126.980709] index -1 is out of range for type 'u32 [4]' [ 126.980729] CPU: 4 PID: 9 Comm: kworker/u16:0 Tainted: G E 6.3.0-rc4-mtk-local-202304272142 #1 [ 126.980754] Hardware name: Intel(R) Client Systems NUC8i7BEH/NUC8BEB, BIOS BECFL357.86A.0081.2020.0504.1834 05/04/2020 [ 126.980770] Workqueue: kvub300c vub300_cmndwork_thread [vub300] [ 126.980833] Call Trace: [ 126.980845] <TASK> [ 126.980860] dump_stack_lvl+0x48/0x70 [ 126.980895] dump_stack+0x10/0x20 [ 126.980916] ubsan_epilogue+0x9/0x40 [ 126.980944] __ubsan_handle_out_of_bounds+0x70/0x90 [ 126.980979] vub300_cmndwork_thread+0x58e7/0x5e10 [vub300] [ 126.981018] ? _raw_spin_unlock+0x18/0x40 [ 126.981042] ? finish_task_switch+0x175/0x6f0 [ 126.981070] ? __switch_to+0x42e/0xda0 [ 126.981089] ? __switch_to_asm+0x3a/0x80 [ 126.981129] ? __pfx_vub300_cmndwork_thread+0x10/0x10 [vub300] [ 126.981174] ? __kasan_check_read+0x11/0x20 [ 126.981204] process_one_work+0x7ee/0x13d0 [ 126.981246] worker_thread+0x53c/0x1240 [ 126.981291] kthread+0x2b8/0x370 [ 126.981312] ? __pfx_worker_thread+0x10/0x10 [ 126.981336] ? __pfx_kthread+0x10/0x10 [ 126.981359] ret_from_fork+0x29/0x50 [ 126.981400] </TASK> Fixes: 88095e7 ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/048cd6972c50c33c2e8f81d5228fed928519918b.1683987673.git.deren.wu@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The cited commit adds a compeletion to remove dependency on rtnl lock. But it causes a deadlock for multiple encapsulations: crash> bt ffff8aece8a64000 PID: 1514557 TASK: ffff8aece8a64000 CPU: 3 COMMAND: "tc" #0 [ffffa6d14183f368] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14183f3f8] schedule at ffffffffb8ba8418 thesofproject#2 [ffffa6d14183f418] schedule_preempt_disabled at ffffffffb8ba8898 thesofproject#3 [ffffa6d14183f428] __mutex_lock at ffffffffb8baa7f8 thesofproject#4 [ffffa6d14183f4d0] mutex_lock_nested at ffffffffb8baabeb thesofproject#5 [ffffa6d14183f4e0] mlx5e_attach_encap at ffffffffc0f48c17 [mlx5_core] thesofproject#6 [ffffa6d14183f628] mlx5e_tc_add_fdb_flow at ffffffffc0f39680 [mlx5_core] thesofproject#7 [ffffa6d14183f688] __mlx5e_add_fdb_flow at ffffffffc0f3b636 [mlx5_core] thesofproject#8 [ffffa6d14183f6f0] mlx5e_tc_add_flow at ffffffffc0f3bcdf [mlx5_core] thesofproject#9 [ffffa6d14183f728] mlx5e_configure_flower at ffffffffc0f3c1d1 [mlx5_core] thesofproject#10 [ffffa6d14183f790] mlx5e_rep_setup_tc_cls_flower at ffffffffc0f3d529 [mlx5_core] thesofproject#11 [ffffa6d14183f7a0] mlx5e_rep_setup_tc_cb at ffffffffc0f3d714 [mlx5_core] thesofproject#12 [ffffa6d14183f7b0] tc_setup_cb_add at ffffffffb8931bb8 thesofproject#13 [ffffa6d14183f810] fl_hw_replace_filter at ffffffffc0dae901 [cls_flower] thesofproject#14 [ffffa6d14183f8d8] fl_change at ffffffffc0db5c57 [cls_flower] thesofproject#15 [ffffa6d14183f970] tc_new_tfilter at ffffffffb8936047 thesofproject#16 [ffffa6d14183fac8] rtnetlink_rcv_msg at ffffffffb88c7c31 thesofproject#17 [ffffa6d14183fb50] netlink_rcv_skb at ffffffffb8942853 thesofproject#18 [ffffa6d14183fbc0] rtnetlink_rcv at ffffffffb88c1835 thesofproject#19 [ffffa6d14183fbd0] netlink_unicast at ffffffffb8941f27 thesofproject#20 [ffffa6d14183fc18] netlink_sendmsg at ffffffffb8942245 thesofproject#21 [ffffa6d14183fc98] sock_sendmsg at ffffffffb887d482 thesofproject#22 [ffffa6d14183fcb8] ____sys_sendmsg at ffffffffb887d81a thesofproject#23 [ffffa6d14183fd38] ___sys_sendmsg at ffffffffb88806e2 thesofproject#24 [ffffa6d14183fe90] __sys_sendmsg at ffffffffb88807a2 thesofproject#25 [ffffa6d14183ff28] __x64_sys_sendmsg at ffffffffb888080f thesofproject#26 [ffffa6d14183ff38] do_syscall_64 at ffffffffb8b9b6a8 thesofproject#27 [ffffa6d14183ff50] entry_SYSCALL_64_after_hwframe at ffffffffb8c0007c crash> bt 0xffff8aeb07544000 PID: 1110766 TASK: ffff8aeb07544000 CPU: 0 COMMAND: "kworker/u20:9" #0 [ffffa6d14e6b7bd8] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14e6b7c68] schedule at ffffffffb8ba8418 thesofproject#2 [ffffa6d14e6b7c88] schedule_timeout at ffffffffb8baef88 thesofproject#3 [ffffa6d14e6b7d10] wait_for_completion at ffffffffb8ba968b thesofproject#4 [ffffa6d14e6b7d60] mlx5e_take_all_encap_flows at ffffffffc0f47ec4 [mlx5_core] thesofproject#5 [ffffa6d14e6b7da0] mlx5e_rep_update_flows at ffffffffc0f3e734 [mlx5_core] thesofproject#6 [ffffa6d14e6b7df8] mlx5e_rep_neigh_update at ffffffffc0f400bb [mlx5_core] thesofproject#7 [ffffa6d14e6b7e50] process_one_work at ffffffffb80acc9c thesofproject#8 [ffffa6d14e6b7ed0] worker_thread at ffffffffb80ad012 thesofproject#9 [ffffa6d14e6b7f10] kthread at ffffffffb80b615d thesofproject#10 [ffffa6d14e6b7f50] ret_from_fork at ffffffffb8001b2f After the first encap is attached, flow will be added to encap entry's flows list. If neigh update is running at this time, the following encaps of the flow can't hold the encap_tbl_lock and sleep. If neigh update thread is waiting for that flow's init_done, deadlock happens. Fix it by holding lock outside of the for loop. If neigh update is running, prevent encap flows from offloading. Since the lock is held outside of the for loop, concurrent creation of encap entries is not allowed. So remove unnecessary wait_for_completion call for res_ready. Fixes: 95435ad ("net/mlx5e: Only access fully initialized flows in neigh update") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

syzbot reported [0] a null-ptr-deref in sk_get_rmem0() while using IPPROTO_UDPLITE (0x88): 14:25:52 executing program 1: r0 = socket$inet6(0xa, 0x80002, 0x88) We had a similar report [1] for probably sk_memory_allocated_add() in __sk_mem_raise_allocated(), and commit c915fe1 ("udplite: fix NULL pointer dereference") fixed it by setting .memory_allocated for udplite_prot and udplitev6_prot. To fix the variant, we need to set either .sysctl_wmem_offset or .sysctl_rmem. Now UDP and UDPLITE share the same value for .memory_allocated, so we use the same .sysctl_wmem_offset for UDP and UDPLITE. [0]: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 6829 Comm: syz-executor.1 Not tainted 6.4.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023 RIP: 0010:sk_get_rmem0 include/net/sock.h:2907 [inline] RIP: 0010:__sk_mem_raise_allocated+0x806/0x17a0 net/core/sock.c:3006 Code: c1 ea 03 80 3c 02 00 0f 85 23 0f 00 00 48 8b 44 24 08 48 8b 98 38 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <0f> b6 14 02 48 89 d8 83 e0 07 83 c0 03 38 d0 0f 8d 6f 0a 00 00 8b RSP: 0018:ffffc90005d7f450 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc90004d92000 RDX: 0000000000000000 RSI: ffffffff88066482 RDI: ffffffff8e2ccbb8 RBP: ffff8880173f7000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000030000 R13: 0000000000000001 R14: 0000000000000340 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880b9800000(0063) knlGS:00000000f7f1cb40 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 000000002e82f000 CR3: 0000000034ff0000 CR4: 00000000003506f0 Call Trace: <TASK> __sk_mem_schedule+0x6c/0xe0 net/core/sock.c:3077 udp_rmem_schedule net/ipv4/udp.c:1539 [inline] __udp_enqueue_schedule_skb+0x776/0xb30 net/ipv4/udp.c:1581 __udpv6_queue_rcv_skb net/ipv6/udp.c:666 [inline] udpv6_queue_rcv_one_skb+0xc39/0x16c0 net/ipv6/udp.c:775 udpv6_queue_rcv_skb+0x194/0xa10 net/ipv6/udp.c:793 __udp6_lib_mcast_deliver net/ipv6/udp.c:906 [inline] __udp6_lib_rcv+0x1bda/0x2bd0 net/ipv6/udp.c:1013 ip6_protocol_deliver_rcu+0x2e7/0x1250 net/ipv6/ip6_input.c:437 ip6_input_finish+0x150/0x2f0 net/ipv6/ip6_input.c:482 NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ip6_input+0xa0/0xd0 net/ipv6/ip6_input.c:491 ip6_mc_input+0x40b/0xf50 net/ipv6/ip6_input.c:585 dst_input include/net/dst.h:468 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ipv6_rcv+0x250/0x380 net/ipv6/ip6_input.c:309 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5491 __netif_receive_skb+0x1f/0x1c0 net/core/dev.c:5605 netif_receive_skb_internal net/core/dev.c:5691 [inline] netif_receive_skb+0x133/0x7a0 net/core/dev.c:5750 tun_rx_batched+0x4b3/0x7a0 drivers/net/tun.c:1553 tun_get_user+0x2452/0x39c0 drivers/net/tun.c:1989 tun_chr_write_iter+0xdf/0x200 drivers/net/tun.c:2035 call_write_iter include/linux/fs.h:1868 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x945/0xd50 fs/read_write.c:584 ksys_write+0x12b/0x250 fs/read_write.c:637 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203 entry_SYSENTER_compat_after_hwframe+0x70/0x82 RIP: 0023:0xf7f21579 Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 RSP: 002b:00000000f7f1c590 EFLAGS: 00000282 ORIG_RAX: 0000000000000004 RAX: ffffffffffffffda RBX: 00000000000000c8 RCX: 0000000020000040 RDX: 0000000000000083 RSI: 00000000f734e000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: Link: https://lore.kernel.org/netdev/CANaxB-yCk8hhP68L4Q2nFOJht8sqgXGGQO2AftpHs0u1xyGG5A@mail.gmail.com/ [1] Fixes: 850cbad ("udp: use it's own memory accounting schema") Reported-by: syzbot+444ca0907e96f7c5e48b@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=444ca0907e96f7c5e48b Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230523163305.66466-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Historically connect(AF_UNSPEC) has been abused by syzkaller and other fuzzers to trigger various bugs. A recent one triggers a divide-by-zero [1], and Paolo Abeni was able to diagnose the issue. tcp_recvmsg_locked() has tests about sk_state being not TCP_LISTEN and TCP REPAIR mode being not used. Then later if socket lock is released in sk_wait_data(), another thread can call connect(AF_UNSPEC), then make this socket a TCP listener. When recvmsg() is resumed, it can eventually call tcp_cleanup_rbuf() and attempt a divide by 0 in tcp_rcv_space_adjust() [1] This patch adds a new socket field, counting number of threads blocked in sk_wait_event() and inet_wait_for_connect(). If this counter is not zero, tcp_disconnect() returns an error. This patch adds code in blocking socket system calls, thus should not hurt performance of non blocking ones. Note that we probably could revert commit 499350a ("tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0") to restore original tcpi_rcv_mss meaning (was 0 if no payload was ever received on a socket) [1] divide error: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 13832 Comm: syz-executor.5 Not tainted 6.3.0-rc4-syzkaller-00224-g00c7b5f4ddc5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023 RIP: 0010:tcp_rcv_space_adjust+0x36e/0x9d0 net/ipv4/tcp_input.c:740 Code: 00 00 00 00 fc ff df 4c 89 64 24 48 8b 44 24 04 44 89 f9 41 81 c7 80 03 00 00 c1 e1 04 44 29 f0 48 63 c9 48 01 e9 48 0f af c1 <49> f7 f6 48 8d 04 41 48 89 44 24 40 48 8b 44 24 30 48 c1 e8 03 48 RSP: 0018:ffffc900033af660 EFLAGS: 00010206 RAX: 4a66b76cbade2c48 RBX: ffff888076640cc0 RCX: 00000000c334e4ac RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000001 RBP: 00000000c324e86c R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880766417f8 R13: ffff888028fbb980 R14: 0000000000000000 R15: 0000000000010344 FS: 00007f5bffbfe700(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32f25000 CR3: 000000007ced0000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_recvmsg_locked+0x100e/0x22e0 net/ipv4/tcp.c:2616 tcp_recvmsg+0x117/0x620 net/ipv4/tcp.c:2681 inet6_recvmsg+0x114/0x640 net/ipv6/af_inet6.c:670 sock_recvmsg_nosec net/socket.c:1017 [inline] sock_recvmsg+0xe2/0x160 net/socket.c:1038 ____sys_recvmsg+0x210/0x5a0 net/socket.c:2720 ___sys_recvmsg+0xf2/0x180 net/socket.c:2762 do_recvmmsg+0x25e/0x6e0 net/socket.c:2856 __sys_recvmmsg net/socket.c:2935 [inline] __do_sys_recvmmsg net/socket.c:2958 [inline] __se_sys_recvmmsg net/socket.c:2951 [inline] __x64_sys_recvmmsg+0x20f/0x260 net/socket.c:2951 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f5c0108c0f9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f5bffbfe168 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00007f5c011ac050 RCX: 00007f5c0108c0f9 RDX: 0000000000000001 RSI: 0000000020000bc0 RDI: 0000000000000003 RBP: 00007f5c010e7b39 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000122 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f5c012cfb1f R14: 00007f5bffbfe300 R15: 0000000000022000 </TASK> Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Paolo Abeni <pabeni@redhat.com> Diagnosed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20230526163458.2880232-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We encountered a crash when using SMCRv2. It is caused by a logical error in smc_llc_fill_ext_v2(). BUG: kernel NULL pointer dereference, address: 0000000000000014 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 453 Comm: kworker/7:4 Kdump: loaded Tainted: G W E 6.4.0-rc3+ thesofproject#44 Workqueue: events smc_llc_add_link_work [smc] RIP: 0010:smc_llc_fill_ext_v2+0x117/0x280 [smc] RSP: 0018:ffffacb5c064bd88 EFLAGS: 00010282 RAX: ffff9a6bc1c3c02c RBX: ffff9a6be3558000 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000002 RDI: 000000000000000a RBP: ffffacb5c064bdb8 R08: 0000000000000040 R09: 000000000000000c R10: ffff9a6bc0910300 R11: 0000000000000002 R12: 0000000000000000 R13: 0000000000000002 R14: ffff9a6bc1c3c02c R15: ffff9a6be3558250 FS: 0000000000000000(0000) GS:ffff9a6eefdc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000014 CR3: 000000010b078003 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> smc_llc_send_add_link+0x1ae/0x2f0 [smc] smc_llc_srv_add_link+0x2c9/0x5a0 [smc] ? cc_mkenc+0x40/0x60 smc_llc_add_link_work+0xb8/0x140 [smc] process_one_work+0x1e5/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> When an alernate RNIC is available in system, SMC will try to add a new link based on the RNIC for resilience. All the RMBs in use will be mapped to the new link. Then the RMBs' MRs corresponding to the new link will be filled into SMCRv2 LLC ADD LINK messages. However, smc_llc_fill_ext_v2() mistakenly accesses to unused RMBs which haven't been mapped to the new link and have no valid MRs, thus causing a crash. So this patch fixes the logic. Fixes: b4ba465 ("net/smc: extend LLC layer for SMC-Rv2") Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Frank reported boot regression in ia64 as: ELILO v3.16 for EFI/IA-64 .. Uncompressing Linux... done Loading file AC100221.initrd.img...done [ 0.000000] Linux version 6.4.0-rc3 (root@x4270) (ia64-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39) #1 SMP Thu May 25 15:52:20 CEST 2023 [ 0.000000] efi: EFI v1.1 by HP [ 0.000000] efi: SALsystab=0x3ee7a000 ACPI 2.0=0x3fe2a000 ESI=0x3ee7b000 SMBIOS=0x3ee7c000 HCDP=0x3fe28000 [ 0.000000] PCDP: v3 at 0x3fe28000 [ 0.000000] earlycon: uart8250 at MMIO 0x00000000f4050000 (options '9600n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000000003FE2A000 000028 (v02 HP ) [ 0.000000] ACPI: XSDT 0x000000003FE2A02C 0000CC (v01 HP rx2620 00000000 HP 00000000) [...] [ 3.793350] Run /init as init process Loading, please wait... Starting systemd-udevd version 252.6-1 [ 3.951100] ------------[ cut here ]------------ [ 3.951100] WARNING: CPU: 6 PID: 140 at kernel/module/main.c:1547 __layout_sections+0x370/0x3c0 [ 3.949512] Unable to handle kernel paging request at virtual address 1000000000000000 [ 3.951100] Modules linked in: [ 3.951100] CPU: 6 PID: 140 Comm: (udev-worker) Not tainted 6.4.0-rc3 #1 [ 3.956161] (udev-worker)[142]: Oops 11003706212352 [1] [ 3.951774] Hardware name: hp server rx2620 , BIOS 04.29 11/30/2007 [ 3.951774] [ 3.951774] Call Trace: [ 3.958339] Unable to handle kernel paging request at virtual address 1000000000000000 [ 3.956161] Modules linked in: [ 3.951774] [<a0000001000156d0>] show_stack.part.0+0x30/0x60 [ 3.951774] sp=e000000183a67b20 bsp=e000000183a61628 [ 3.956161] [ 3.956161] which bisect to module_memory change [1]. Debug showed that ia64 uses some special sections: __layout_sections: section .got (sh_flags 10000002) matched to MOD_INVALID __layout_sections: section .sdata (sh_flags 10000003) matched to MOD_INVALID __layout_sections: section .sbss (sh_flags 10000003) matched to MOD_INVALID All these sections are loaded to module core memory before [1]. Fix ia64 boot by loading these sections to MOD_DATA (core rw data). [1] commit ac3b432 ("module: replace module_layout with module_memory") Fixes: ac3b432 ("module: replace module_layout with module_memory") Reported-by: Frank Scheiner <frank.scheiner@web.de> Closes: https://lists.debian.org/debian-ia64/2023/05/msg00010.html Closes: https://marc.info/?l=linux-ia64&m=168509859125505 Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Song Liu <song@kernel.org> Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>

When use the following command to test: 1)ip link add bond0 type bond 2)ip link set bond0 up 3)tc qdisc add dev bond0 root handle ffff: mq 4)tc qdisc replace dev bond0 parent ffff:fff1 handle ffff: mq The kernel reports NULL pointer dereference issue. The stack information is as follows: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Internal error: Oops: 0000000096000006 [#1] SMP Modules linked in: pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mq_attach+0x44/0xa0 lr : qdisc_graft+0x20c/0x5cc sp : ffff80000e2236a0 x29: ffff80000e2236a0 x28: ffff0000c0e59d80 x27: ffff0000c0be19c0 x26: ffff0000cae3e800 x25: 0000000000000010 x24: 00000000fffffff1 x23: 0000000000000000 x22: ffff0000cae3e800 x21: ffff0000c9df4000 x20: ffff0000c9df4000 x19: 0000000000000000 x18: ffff80000a934000 x17: ffff8000f5b56000 x16: ffff80000bb08000 x15: 0000000000000000 x14: 0000000000000000 x13: 6b6b6b6b6b6b6b6b x12: 6b6b6b6b00000001 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff0000c0be0730 x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000008 x5 : ffff0000cae3e864 x4 : 0000000000000000 x3 : 0000000000000001 x2 : 0000000000000001 x1 : ffff8000090bc23c x0 : 0000000000000000 Call trace: mq_attach+0x44/0xa0 qdisc_graft+0x20c/0x5cc tc_modify_qdisc+0x1c4/0x664 rtnetlink_rcv_msg+0x354/0x440 netlink_rcv_skb+0x64/0x144 rtnetlink_rcv+0x28/0x34 netlink_unicast+0x1e8/0x2a4 netlink_sendmsg+0x308/0x4a0 sock_sendmsg+0x64/0xac ____sys_sendmsg+0x29c/0x358 ___sys_sendmsg+0x90/0xd0 __sys_sendmsg+0x7c/0xd0 __arm64_sys_sendmsg+0x2c/0x38 invoke_syscall+0x54/0x114 el0_svc_common.constprop.1+0x90/0x174 do_el0_svc+0x3c/0xb0 el0_svc+0x24/0xec el0t_64_sync_handler+0x90/0xb4 el0t_64_sync+0x174/0x178 This is because when mq is added for the first time, qdiscs in mq is set to NULL in mq_attach(). Therefore, when replacing mq after adding mq, we need to initialize qdiscs in the mq before continuing to graft. Otherwise, it will couse NULL pointer dereference issue in mq_attach(). And the same issue will occur in the attach functions of mqprio, taprio and htb. ffff:fff1 means that the repalce qdisc is ingress. Ingress does not allow any qdisc to be attached. Therefore, ffff:fff1 is incorrectly used, and the command should be dropped. Fixes: 6ec1c69 ("net_sched: add classful multiqueue dummy scheduler") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Tested-by: Peilin Ye <peilin.ye@bytedance.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20230527093747.3583502-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlx5 add IRQs to rmap upon MSIX request, and mlx5 remove rmap from MSIX only if msi_map.index is populated. However, msi_map.index is populated only when dynamic MSIX is supported. This results in freeing IRQs without removing them from rmap, which triggers the bellow WARN_ON[1]. rmap is a feature which have no relation to dynamic MSIX. Hence, remove the check of msi_map.index when removing IRQ from rmap. [1] [ 200.307160 ] WARNING: CPU: 20 PID: 1702 at kernel/irq/manage.c:2034 free_irq+0x2ac/0x358 [ 200.316990 ] CPU: 20 PID: 1702 Comm: modprobe Not tainted 6.4.0-rc3_for_upstream_min_debug_2023_05_24_14_02 #1 [ 200.318939 ] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 200.321659 ] pc : free_irq+0x2ac/0x358 [ 200.322400 ] lr : free_irq+0x20/0x358 [ 200.337865 ] Call trace: [ 200.338360 ] free_irq+0x2ac/0x358 [ 200.339029 ] irq_release+0x58/0xd0 [mlx5_core] [ 200.340093 ] mlx5_irqs_release_vectors+0x80/0xb0 [mlx5_core] [ 200.341344 ] destroy_comp_eqs+0x120/0x170 [mlx5_core] [ 200.342469 ] mlx5_eq_table_destroy+0x1c/0x38 [mlx5_core] [ 200.343645 ] mlx5_unload+0x8c/0xc8 [mlx5_core] [ 200.344652 ] mlx5_uninit_one+0x78/0x118 [mlx5_core] [ 200.345745 ] remove_one+0x80/0x108 [mlx5_core] [ 200.346752 ] pci_device_remove+0x40/0xd8 [ 200.347554 ] device_remove+0x50/0x88 [ 200.348272 ] device_release_driver_internal+0x1c4/0x228 [ 200.349312 ] driver_detach+0x54/0xa0 [ 200.350030 ] bus_remove_driver+0x74/0x100 [ 200.350833 ] driver_unregister+0x34/0x68 [ 200.351619 ] pci_unregister_driver+0x28/0xa0 [ 200.352476 ] mlx5_cleanup+0x14/0x2210 [mlx5_core] [ 200.353536 ] __arm64_sys_delete_module+0x190/0x2e8 [ 200.354495 ] el0_svc_common.constprop.0+0x6c/0x1d0 [ 200.355455 ] do_el0_svc+0x38/0x98 [ 200.356122 ] el0_svc+0x1c/0x80 [ 200.356739 ] el0t_64_sync_handler+0xb4/0x130 [ 200.357604 ] el0t_64_sync+0x174/0x178 [ 200.358345 ] ---[ end trace 0000000000000000 ]--- Fixes: 3354822 ("net/mlx5: Use dynamic msix vectors allocation") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

@irqd

[ 9.837087] mlx5_core 0000:02:00.0: firmware version: 16.35.2000 [ 9.843126] mlx5_core 0000:02:00.0: 126.016 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x16 link) [ 10.311515] mlx5_core 0000:02:00.0: Rate limit: 127 rates are supported, range: 0Mbps to 97656Mbps [ 10.321948] mlx5_core 0000:02:00.0: E-Switch: Total vports 2, per vport: max uc(128) max mc(2048) [ 10.344324] mlx5_core 0000:02:00.0: mlx5_pcie_event:301:(pid 88): PCIe slot advertised sufficient power (27W). [ 10.354339] BUG: unable to handle page fault for address: ffffffff8ff0ade0 [ 10.361206] #PF: supervisor read access in kernel mode [ 10.366335] #PF: error_code(0x0000) - not-present page [ 10.371467] PGD 81ec39067 P4D 81ec39067 PUD 81ec3a063 PMD 114b07063 PTE 800ffff7e10f5062 [ 10.379544] Oops: 0000 [#1] PREEMPT SMP PTI [ 10.383721] CPU: 0 PID: 117 Comm: kworker/0:6 Not tainted 6.3.0-13028-g7222f123c983 #1 [ 10.391625] Hardware name: Supermicro X10SRA-F/X10SRA-F, BIOS 2.0b 06/12/2017 [ 10.398750] Workqueue: events work_for_cpu_fn [ 10.403108] RIP: 0010:__bitmap_or+0x10/0x26 [ 10.407286] Code: 85 c0 0f 95 c0 c3 cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 89 c9 31 c0 48 83 c1 3f 48 c1 e9 06 39 c> [ 10.426024] RSP: 0000:ffffb45a0078f7b0 EFLAGS: 00010097 [ 10.431240] RAX: 0000000000000000 RBX: ffffffff8ff0adc0 RCX: 0000000000000004 [ 10.438365] RDX: ffff9156801967d0 RSI: ffffffff8ff0ade0 RDI: ffff9156801967b0 [ 10.445489] RBP: ffffb45a0078f7e8 R08: 0000000000000030 R09: 0000000000000000 [ 10.452613] R10: 0000000000000000 R11: 0000000000000000 R12: 00000000000000ec [ 10.459737] R13: ffffffff8ff0ade0 R14: 0000000000000001 R15: 0000000000000020 [ 10.466862] FS: 0000000000000000(0000) GS:ffff9165bfc00000(0000) knlGS:0000000000000000 [ 10.474936] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 10.480674] CR2: ffffffff8ff0ade0 CR3: 00000001011ae003 CR4: 00000000003706f0 [ 10.487800] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 10.494922] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 10.502046] Call Trace: [ 10.504493] <TASK> [ 10.506589] ? matrix_alloc_area.constprop.0+0x43/0x9a [ 10.511729] ? prepare_namespace+0x84/0x174 [ 10.515914] irq_matrix_reserve_managed+0x56/0x10c [ 10.520699] x86_vector_alloc_irqs+0x1d2/0x31e [ 10.525146] irq_domain_alloc_irqs_hierarchy+0x39/0x3f [ 10.530284] irq_domain_alloc_irqs_parent+0x1a/0x2a [ 10.535155] intel_irq_remapping_alloc+0x59/0x5e9 [ 10.539859] ? kmem_cache_debug_flags+0x11/0x26 [ 10.544383] ? __radix_tree_lookup+0x39/0xb9 [ 10.548649] irq_domain_alloc_irqs_hierarchy+0x39/0x3f [ 10.553779] irq_domain_alloc_irqs_parent+0x1a/0x2a [ 10.558650] msi_domain_alloc+0x8c/0x120 [ 10.567697] irq_domain_alloc_irqs_locked+0x11d/0x286 [ 10.572741] __irq_domain_alloc_irqs+0x72/0x93 [ 10.577179] __msi_domain_alloc_irqs+0x193/0x3f1 [ 10.581789] ? __xa_alloc+0xcf/0xe2 [ 10.585273] msi_domain_alloc_irq_at+0xa8/0xfe [ 10.589711] pci_msix_alloc_irq_at+0x47/0x5c The crash is due to matrix_alloc_area() attempting to access per-CPU memory for CPUs that are not present on the system. The CPU mask passed into reserve_managed_vector() via it's @irqd parameter is corrupted because it contains uninitialized stack data. Fixes: bbac70c ("net/mlx5: Use newer affinity descriptor") Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

…ta_ready() syzbot found sk_psock(sk) could return NULL when called from sk_psock_verdict_data_ready(). Just make sure to handle this case. [1] general protection fault, probably for non-canonical address 0xdffffc000000005c: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x00000000000002e0-0x00000000000002e7] CPU: 0 PID: 15 Comm: ksoftirqd/0 Not tainted 6.4.0-rc3-syzkaller-00588-g4781e965e655 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/16/2023 RIP: 0010:sk_psock_verdict_data_ready+0x19f/0x3c0 net/core/skmsg.c:1213 Code: 4c 89 e6 e8 63 70 5e f9 4d 85 e4 75 75 e8 19 74 5e f9 48 8d bb e0 02 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 07 02 00 00 48 89 ef ff 93 e0 02 00 00 e8 29 fd RSP: 0018:ffffc90000147688 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000100 RDX: 000000000000005c RSI: ffffffff8825ceb7 RDI: 00000000000002e0 RBP: ffff888076518c40 R08: 0000000000000007 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000008000 R15: ffff888076518c40 FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f901375bab0 CR3: 000000004bf26000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_data_ready+0x10a/0x520 net/ipv4/tcp_input.c:5006 tcp_data_queue+0x25d3/0x4c50 net/ipv4/tcp_input.c:5080 tcp_rcv_established+0x829/0x1f90 net/ipv4/tcp_input.c:6019 tcp_v4_do_rcv+0x65a/0x9c0 net/ipv4/tcp_ipv4.c:1726 tcp_v4_rcv+0x2cbf/0x3340 net/ipv4/tcp_ipv4.c:2148 ip_protocol_deliver_rcu+0x9f/0x480 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x2ec/0x520 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ip_local_deliver+0x1ae/0x200 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:468 [inline] ip_rcv_finish+0x1cf/0x2f0 net/ipv4/ip_input.c:449 NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ip_rcv+0xae/0xd0 net/ipv4/ip_input.c:569 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5491 __netif_receive_skb+0x1f/0x1c0 net/core/dev.c:5605 process_backlog+0x101/0x670 net/core/dev.c:5933 __napi_poll+0xb7/0x6f0 net/core/dev.c:6499 napi_poll net/core/dev.c:6566 [inline] net_rx_action+0x8a9/0xcb0 net/core/dev.c:6699 __do_softirq+0x1d4/0x905 kernel/softirq.c:571 run_ksoftirqd kernel/softirq.c:939 [inline] run_ksoftirqd+0x31/0x60 kernel/softirq.c:931 smpboot_thread_fn+0x659/0x9e0 kernel/smpboot.c:164 kthread+0x344/0x440 kernel/kthread.c:379 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 </TASK> Fixes: 6df7f76 ("bpf, sockmap: Wake up polling after data copy") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20230530195149.68145-1-edumazet@google.com

The ice driver caches next_to_clean value at the beginning of ice_clean_rx_irq() in order to remember the first buffer that has to be freed/recycled after main Rx processing loop. The end boundary is indicated by first descriptor of frame that Rx processing loop has ended its duties. Note that if mentioned loop ended in the middle of gathering multi-buffer frame, next_to_clean would be pointing to the descriptor in the middle of the frame BUT freeing/recycling stage will stop at the first descriptor. This means that next iteration of ice_clean_rx_irq() will miss the (first_desc, next_to_clean - 1) entries. When running various 9K MTU workloads, such splats were observed: [ 540.780716] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 540.787787] #PF: supervisor read access in kernel mode [ 540.793002] #PF: error_code(0x0000) - not-present page [ 540.798218] PGD 0 P4D 0 [ 540.800801] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 540.805231] CPU: 18 PID: 3984 Comm: xskxceiver Tainted: G W 6.3.0-rc7+ thesofproject#96 [ 540.813619] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 540.824209] RIP: 0010:ice_clean_rx_irq+0x2b6/0xf00 [ice] [ 540.829678] Code: 74 24 10 e9 aa 00 00 00 8b 55 78 41 31 57 10 41 09 c4 4d 85 ff 0f 84 83 00 00 00 49 8b 57 08 41 8b 4f 1c 65 8b 35 1a fa 4b 3f <48> 8b 02 48 c1 e8 3a 39 c6 0f 85 a2 00 00 00 f6 42 08 02 0f 85 98 [ 540.848717] RSP: 0018:ffffc9000f42fc50 EFLAGS: 00010282 [ 540.854029] RAX: 0000000000000004 RBX: 0000000000000002 RCX: 000000000000fffe [ 540.861272] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 00000000ffffffff [ 540.868519] RBP: ffff88984a05ac00 R08: 0000000000000000 R09: dead000000000100 [ 540.875760] R10: ffff88983fffcd00 R11: 000000000010f2b8 R12: 0000000000000004 [ 540.883008] R13: 0000000000000003 R14: 0000000000000800 R15: ffff889847a10040 [ 540.890253] FS: 00007f6ddf7fe640(0000) GS:ffff88afdf800000(0000) knlGS:0000000000000000 [ 540.898465] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 540.904299] CR2: 0000000000000000 CR3: 000000010d3da001 CR4: 00000000007706e0 [ 540.911542] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 540.918789] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 540.926032] PKRU: 55555554 [ 540.928790] Call Trace: [ 540.931276] <TASK> [ 540.933418] ice_napi_poll+0x4ca/0x6d0 [ice] [ 540.937804] ? __pfx_ice_napi_poll+0x10/0x10 [ice] [ 540.942716] napi_busy_loop+0xd7/0x320 [ 540.946537] xsk_recvmsg+0x143/0x170 [ 540.950178] sock_recvmsg+0x99/0xa0 [ 540.953729] __sys_recvfrom+0xa8/0x120 [ 540.957543] ? do_futex+0xbd/0x1d0 [ 540.961008] ? __x64_sys_futex+0x73/0x1d0 [ 540.965083] __x64_sys_recvfrom+0x20/0x30 [ 540.969155] do_syscall_64+0x38/0x90 [ 540.972796] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 540.977934] RIP: 0033:0x7f6de5f27934 To fix this, set cached_ntc to first_desc so that at the end, when freeing/recycling buffers, descriptors from first to ntc are not missed. Fixes: 2fba7dc ("ice: Add support for XDP multi-buffer on Rx side") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230531154457.3216621-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

SMCRv1 has a similar issue to SMCRv2 (see link below) that may access invalid MRs of RMBs when construct LLC ADD LINK CONT messages. BUG: kernel NULL pointer dereference, address: 0000000000000014 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 5 PID: 48 Comm: kworker/5:0 Kdump: loaded Tainted: G W E 6.4.0-rc3+ thesofproject#49 Workqueue: events smc_llc_add_link_work [smc] RIP: 0010:smc_llc_add_link_cont+0x160/0x270 [smc] RSP: 0018:ffffa737801d3d50 EFLAGS: 00010286 RAX: ffff964f82144000 RBX: ffffa737801d3dd8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff964f81370c30 RBP: ffffa737801d3dd4 R08: ffff964f81370000 R09: ffffa737801d3db0 R10: 0000000000000001 R11: 0000000000000060 R12: ffff964f82e70000 R13: ffff964f81370c38 R14: ffffa737801d3dd3 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff9652bfd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000014 CR3: 000000008fa20004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> smc_llc_srv_rkey_exchange+0xa7/0x190 [smc] smc_llc_srv_add_link+0x3ae/0x5a0 [smc] smc_llc_add_link_work+0xb8/0x140 [smc] process_one_work+0x1e5/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> When an alernate RNIC is available in system, SMC will try to add a new link based on the RNIC for resilience. All the RMBs in use will be mapped to the new link. Then the RMBs' MRs corresponding to the new link will be filled into LLC messages. For SMCRv1, they are ADD LINK CONT messages. However smc_llc_add_link_cont() may mistakenly access to unused RMBs which haven't been mapped to the new link and have no valid MRs, thus causing a crash. So this patch fixes it. Fixes: 87f88cd ("net/smc: rkey processing for a new link as SMC client") Link: https://lore.kernel.org/r/1685101741-74826-3-git-send-email-guwen@linux.alibaba.com Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>

The nr_active counter continues to increase over time which causes the blk_mq_get_tag to hang until the thread is rescheduled to a different core despite there are still tags available. kernel-stack INFO: task inboundIOReacto:3014879 blocked for more than 2 seconds Not tainted 6.1.15-amd64 #1 Debian 6.1.15~debian11 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:inboundIOReacto state:D stack:0 pid:3014879 ppid:4557 flags:0x00000000 Call Trace: <TASK> __schedule+0x351/0xa20 scheduler+0x5d/0xe0 io_schedule+0x42/0x70 blk_mq_get_tag+0x11a/0x2a0 ? dequeue_task_stop+0x70/0x70 __blk_mq_alloc_requests+0x191/0x2e0 kprobe output showing RQF_MQ_INFLIGHT bit is not cleared before __blk_mq_free_request being called. 320 320 kworker/29:1H __blk_mq_free_request rq_flags 0x220c0 in-flight 1 b'__blk_mq_free_request+0x1 [kernel]' b'bt_iter+0x50 [kernel]' b'blk_mq_queue_tag_busy_iter+0x318 [kernel]' b'blk_mq_timeout_work+0x7c [kernel]' b'process_one_work+0x1c4 [kernel]' b'worker_thread+0x4d [kernel]' b'kthread+0xe6 [kernel]' b'ret_from_fork+0x1f [kernel]' Signed-off-by: Tian Lan <tian.lan@twosigma.com> Fixes: 2e315dc ("blk-mq: grab rq->refcount before calling ->fn in blk_mq_tagset_busy_iter") Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230513221227.497327-1-tilan7663@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>

syzkaller found a repro that causes Hung Task [0] with ipset. The repro first creates an ipset and then tries to delete a large number of IPs from the ipset concurrently: IPSET_ATTR_IPADDR_IPV4 : 172.20.20.187 IPSET_ATTR_CIDR : 2 The first deleting thread hogs a CPU with nfnl_lock(NFNL_SUBSYS_IPSET) held, and other threads wait for it to be released. Previously, the same issue existed in set->variant->uadt() that could run so long under ip_set_lock(set). Commit 5e29dc3 ("netfilter: ipset: Rework long task execution when adding/deleting entries") tried to fix it, but the issue still exists in the caller with another mutex. While adding/deleting many IPs, we should release the CPU periodically to prevent someone from abusing ipset to hang the system. Note we need to increment the ipset's refcnt to prevent the ipset from being destroyed while rescheduling. [0]: INFO: task syz-executor174:268 blocked for more than 143 seconds. Not tainted 6.4.0-rc1-00145-gba79e9a73284 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor174 state:D stack:0 pid:268 ppid:260 flags:0x0000000d Call trace: __switch_to+0x308/0x714 arch/arm64/kernel/process.c:556 context_switch kernel/sched/core.c:5343 [inline] __schedule+0xd84/0x1648 kernel/sched/core.c:6669 schedule+0xf0/0x214 kernel/sched/core.c:6745 schedule_preempt_disabled+0x58/0xf0 kernel/sched/core.c:6804 __mutex_lock_common kernel/locking/mutex.c:679 [inline] __mutex_lock+0x6fc/0xdb0 kernel/locking/mutex.c:747 __mutex_lock_slowpath+0x14/0x20 kernel/locking/mutex.c:1035 mutex_lock+0x98/0xf0 kernel/locking/mutex.c:286 nfnl_lock net/netfilter/nfnetlink.c:98 [inline] nfnetlink_rcv_msg+0x480/0x70c net/netfilter/nfnetlink.c:295 netlink_rcv_skb+0x1c0/0x350 net/netlink/af_netlink.c:2546 nfnetlink_rcv+0x18c/0x199c net/netfilter/nfnetlink.c:658 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x664/0x8cc net/netlink/af_netlink.c:1365 netlink_sendmsg+0x6d0/0xa4c net/netlink/af_netlink.c:1913 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0x4b8/0x810 net/socket.c:2503 ___sys_sendmsg net/socket.c:2557 [inline] __sys_sendmsg+0x1f8/0x2a4 net/socket.c:2586 __do_sys_sendmsg net/socket.c:2595 [inline] __se_sys_sendmsg net/socket.c:2593 [inline] __arm64_sys_sendmsg+0x80/0x94 net/socket.c:2593 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x84/0x270 arch/arm64/kernel/syscall.c:52 el0_svc_common+0x134/0x24c arch/arm64/kernel/syscall.c:142 do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:193 el0_svc+0x2c/0x7c arch/arm64/kernel/entry-common.c:637 el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Reported-by: syzkaller <syzkaller@googlegroups.com> Fixes: a7b4f98 ("netfilter: ipset: IP set core support") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

A remote DoS vulnerability of RPL Source Routing is assigned CVE-2023-2156. The Source Routing Header (SRH) has the following format: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Next Header | Hdr Ext Len | Routing Type | Segments Left | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | CmprI | CmprE | Pad | Reserved | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | . . . Addresses[1..n] . . . | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The originator of an SRH places the first hop's IPv6 address in the IPv6 header's IPv6 Destination Address and the second hop's IPv6 address as the first address in Addresses[1..n]. The CmprI and CmprE fields indicate the number of prefix octets that are shared with the IPv6 Destination Address. When CmprI or CmprE is not 0, Addresses[1..n] are compressed as follows: 1..n-1 : (16 - CmprI) bytes n : (16 - CmprE) bytes Segments Left indicates the number of route segments remaining. When the value is not zero, the SRH is forwarded to the next hop. Its address is extracted from Addresses[n - Segment Left + 1] and swapped with IPv6 Destination Address. When Segment Left is greater than or equal to 2, the size of SRH is not changed because Addresses[1..n-1] are decompressed and recompressed with CmprI. OTOH, when Segment Left changes from 1 to 0, the new SRH could have a different size because Addresses[1..n-1] are decompressed with CmprI and recompressed with CmprE. Let's say CmprI is 15 and CmprE is 0. When we receive SRH with Segment Left >= 2, Addresses[1..n-1] have 1 byte for each, and Addresses[n] has 16 bytes. When Segment Left is 1, Addresses[1..n-1] is decompressed to 16 bytes and not recompressed. Finally, the new SRH will need more room in the header, and the size is (16 - 1) * (n - 1) bytes. Here the max value of n is 255 as Segment Left is u8, so in the worst case, we have to allocate 3825 bytes in the skb headroom. However, now we only allocate a small fixed buffer that is IPV6_RPL_SRH_WORST_SWAP_SIZE (16 + 7 bytes). If the decompressed size overflows the room, skb_push() hits BUG() below [0]. Instead of allocating the fixed buffer for every packet, let's allocate enough headroom only when we receive SRH with Segment Left 1. [0]: skbuff: skb_under_panic: text:ffffffff81c9f6e2 len:576 put:576 head:ffff8880070b5180 data:ffff8880070b4fb0 tail:0x70 end:0x140 dev:lo kernel BUG at net/core/skbuff.c:200! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 154 Comm: python3 Not tainted 6.4.0-rc4-00190-gc308e9ec0047 thesofproject#7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:skb_panic (net/core/skbuff.c:200) Code: 4f 70 50 8b 87 bc 00 00 00 50 8b 87 b8 00 00 00 50 ff b7 c8 00 00 00 4c 8b 8f c0 00 00 00 48 c7 c7 80 6e 77 82 e8 ad 8b 60 ff <0f> 0b 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffc90000003da0 EFLAGS: 00000246 RAX: 0000000000000085 RBX: ffff8880058a6600 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88807dc1c540 RDI: ffff88807dc1c540 RBP: ffffc90000003e48 R08: ffffffff82b392c8 R09: 00000000ffffdfff R10: ffffffff82a592e0 R11: ffffffff82b092e0 R12: ffff888005b1c800 R13: ffff8880070b51b8 R14: ffff888005b1ca18 R15: ffff8880070b5190 FS: 00007f4539f0b740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055670baf3000 CR3: 0000000005b0e000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> skb_push (net/core/skbuff.c:210) ipv6_rthdr_rcv (./include/linux/skbuff.h:2880 net/ipv6/exthdrs.c:634 net/ipv6/exthdrs.c:718) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:437 (discriminator 5)) ip6_input_finish (./include/linux/rcupdate.h:805 net/ipv6/ip6_input.c:483) __netif_receive_skb_one_core (net/core/dev.c:5494) process_backlog (./include/linux/rcupdate.h:805 net/core/dev.c:5934) __napi_poll (net/core/dev.c:6496) net_rx_action (net/core/dev.c:6565 net/core/dev.c:6696) __do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:572) do_softirq (kernel/softirq.c:472 kernel/softirq.c:459) </IRQ> <TASK> __local_bh_enable_ip (kernel/softirq.c:396) __dev_queue_xmit (net/core/dev.c:4272) ip6_finish_output2 (./include/net/neighbour.h:544 net/ipv6/ip6_output.c:134) rawv6_sendmsg (./include/net/dst.h:458 ./include/linux/netfilter.h:303 net/ipv6/raw.c:656 net/ipv6/raw.c:914) sock_sendmsg (net/socket.c:724 net/socket.c:747) __sys_sendto (net/socket.c:2144) __x64_sys_sendto (net/socket.c:2156 net/socket.c:2152 net/socket.c:2152) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) RIP: 0033:0x7f453a138aea Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffcc212a1c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007ffcc212a288 RCX: 00007f453a138aea RDX: 0000000000000060 RSI: 00007f4539084c20 RDI: 0000000000000003 RBP: 00007f4538308e80 R08: 00007ffcc212a300 R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007f4539712d1b </TASK> Modules linked in: Fixes: 8610c7c ("net: ipv6: add support for rpl sr exthdr") Reported-by: Max VA Closes: https://www.interruptlabs.co.uk/articles/linux-ipv6-route-of-death Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230605180617.67284-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, the per cpu upcall counters are allocated after the vport is created and inserted into the system. This could lead to the datapath accessing the counters before they are allocated resulting in a kernel Oops. Here is an example: PID: 59693 TASK: ffff0005f4f51500 CPU: 0 COMMAND: "ovs-vswitchd" #0 [ffff80000a39b5b0] __switch_to at ffffb70f0629f2f4 #1 [ffff80000a39b5d0] __schedule at ffffb70f0629f5cc thesofproject#2 [ffff80000a39b650] preempt_schedule_common at ffffb70f0629fa60 thesofproject#3 [ffff80000a39b670] dynamic_might_resched at ffffb70f0629fb58 thesofproject#4 [ffff80000a39b680] mutex_lock_killable at ffffb70f062a1388 thesofproject#5 [ffff80000a39b6a0] pcpu_alloc at ffffb70f0594460c thesofproject#6 [ffff80000a39b750] __alloc_percpu_gfp at ffffb70f05944e68 thesofproject#7 [ffff80000a39b760] ovs_vport_cmd_new at ffffb70ee6961b90 [openvswitch] ... PID: 58682 TASK: ffff0005b2f0bf00 CPU: 0 COMMAND: "kworker/0:3" #0 [ffff80000a5d2f40] machine_kexec at ffffb70f056a0758 #1 [ffff80000a5d2f70] __crash_kexec at ffffb70f057e2994 thesofproject#2 [ffff80000a5d3100] crash_kexec at ffffb70f057e2ad8 thesofproject#3 [ffff80000a5d3120] die at ffffb70f0628234c thesofproject#4 [ffff80000a5d31e0] die_kernel_fault at ffffb70f062828a8 thesofproject#5 [ffff80000a5d3210] __do_kernel_fault at ffffb70f056a31f4 thesofproject#6 [ffff80000a5d3240] do_bad_area at ffffb70f056a32a4 thesofproject#7 [ffff80000a5d3260] do_translation_fault at ffffb70f062a9710 thesofproject#8 [ffff80000a5d3270] do_mem_abort at ffffb70f056a2f74 thesofproject#9 [ffff80000a5d32a0] el1_abort at ffffb70f06297dac thesofproject#10 [ffff80000a5d32d0] el1h_64_sync_handler at ffffb70f06299b24 thesofproject#11 [ffff80000a5d3410] el1h_64_sync at ffffb70f056812dc thesofproject#12 [ffff80000a5d3430] ovs_dp_upcall at ffffb70ee6963c84 [openvswitch] thesofproject#13 [ffff80000a5d3470] ovs_dp_process_packet at ffffb70ee6963fdc [openvswitch] thesofproject#14 [ffff80000a5d34f0] ovs_vport_receive at ffffb70ee6972c78 [openvswitch] thesofproject#15 [ffff80000a5d36f0] netdev_port_receive at ffffb70ee6973948 [openvswitch] thesofproject#16 [ffff80000a5d3720] netdev_frame_hook at ffffb70ee6973a28 [openvswitch] thesofproject#17 [ffff80000a5d3730] __netif_receive_skb_core.constprop.0 at ffffb70f06079f90 We moved the per cpu upcall counter allocation to the existing vport alloc and free functions to solve this. Fixes: 95637d9 ("net: openvswitch: release vport resources on failure") Fixes: 1933ea3 ("net: openvswitch: Add support to count upcall packets") Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Anastasios reported crash on stable 5.15 kernel with following BPF attached to lsm hook: SEC("lsm.s/bprm_creds_for_exec") int BPF_PROG(bprm_creds_for_exec, struct linux_binprm *bprm) { struct path *path = &bprm->executable->f_path; char p[128] = { 0 }; bpf_d_path(path, p, 128); return 0; } But bprm->executable can be NULL, so bpf_d_path call will crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI ... RIP: 0010:d_path+0x22/0x280 ... Call Trace: <TASK> bpf_d_path+0x21/0x60 bpf_prog_db9cf176e84498d9_bprm_creds_for_exec+0x94/0x99 bpf_trampoline_6442506293_0+0x55/0x1000 bpf_lsm_bprm_creds_for_exec+0x5/0x10 security_bprm_creds_for_exec+0x29/0x40 bprm_execve+0x1c1/0x900 do_execveat_common.isra.0+0x1af/0x260 __x64_sys_execve+0x32/0x40 It's problem for all stable trees with bpf_d_path helper, which was added in 5.9. This issue is fixed in current bpf code, where we identify and mark trusted pointers, so the above code would fail even to load. For the sake of the stable trees and to workaround potentially broken verifier in the future, adding the code that reads the path object from the passed pointer and verifies it's valid in kernel space. Fixes: 6e22ab9 ("bpf: Add d_path helper") Reported-by: Anastasios Papagiannis <tasos.papagiannnis@gmail.com> Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20230606181714.532998-1-jolsa@kernel.org

…egister Currently the vdpa device is unregistered after the workqueue that processes vq commands is disabled. However, the device unregister process can still send commands to the cvq (a vlan delete for example) which leads to a hang because the handing workqueue has been disabled and the command never finishes: [ 2263.095764] rcu: INFO: rcu_sched self-detected stall on CPU [ 2263.096307] rcu: 9-....: (5250 ticks this GP) idle=dac4/1/0x4000000000000000 softirq=111009/111009 fqs=2544 [ 2263.097154] rcu: (t=5251 jiffies g=393549 q=347 ncpus=10) [ 2263.097648] CPU: 9 PID: 94300 Comm: kworker/u20:2 Not tainted 6.3.0-rc6_for_upstream_min_debug_2023_04_14_00_02 #1 [ 2263.098535] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 2263.099481] Workqueue: mlx5_events mlx5_vhca_state_work_handler [mlx5_core] [ 2263.100143] RIP: 0010:virtnet_send_command+0x109/0x170 [ 2263.100621] Code: 1d df f5 ff 85 c0 78 5c 48 8b 7b 08 e8 d0 c5 f5 ff 84 c0 75 11 eb 22 48 8b 7b 08 e8 01 b7 f5 ff 84 c0 75 15 f3 90 48 8b 7b 08 <48> 8d 74 24 04 e8 8d c5 f5 ff 48 85 c0 74 de 48 8b 83 f8 00 00 00 [ 2263.102148] RSP: 0018:ffff888139cf36e8 EFLAGS: 00000246 [ 2263.102624] RAX: 0000000000000000 RBX: ffff888166bea940 RCX: 0000000000000001 [ 2263.103244] RDX: 0000000000000000 RSI: ffff888139cf36ec RDI: ffff888146763800 [ 2263.103864] RBP: ffff888139cf3710 R08: ffff88810d201000 R09: 0000000000000000 [ 2263.104473] R10: 0000000000000002 R11: 0000000000000003 R12: 0000000000000002 [ 2263.105082] R13: 0000000000000002 R14: ffff888114528400 R15: ffff888166bea000 [ 2263.105689] FS: 0000000000000000(0000) GS:ffff88852cc80000(0000) knlGS:0000000000000000 [ 2263.106404] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2263.106925] CR2: 00007f31f394b000 CR3: 000000010615b006 CR4: 0000000000370ea0 [ 2263.107542] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2263.108163] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2263.108769] Call Trace: [ 2263.109059] <TASK> [ 2263.109320] ? check_preempt_wakeup+0x11f/0x230 [ 2263.109750] virtnet_vlan_rx_kill_vid+0x5a/0xa0 [ 2263.110180] vlan_vid_del+0x9c/0x170 [ 2263.110546] vlan_device_event+0x351/0x760 [8021q] [ 2263.111004] raw_notifier_call_chain+0x41/0x60 [ 2263.111426] dev_close_many+0xcb/0x120 [ 2263.111808] unregister_netdevice_many_notify+0x130/0x770 [ 2263.112297] ? wq_worker_running+0xa/0x30 [ 2263.112688] unregister_netdevice_queue+0x89/0xc0 [ 2263.113128] unregister_netdev+0x18/0x20 [ 2263.113512] virtnet_remove+0x4f/0x230 [ 2263.113885] virtio_dev_remove+0x31/0x70 [ 2263.114273] device_release_driver_internal+0x18f/0x1f0 [ 2263.114746] bus_remove_device+0xc6/0x130 [ 2263.115146] device_del+0x173/0x3c0 [ 2263.115502] ? kernfs_find_ns+0x35/0xd0 [ 2263.115895] device_unregister+0x1a/0x60 [ 2263.116279] unregister_virtio_device+0x11/0x20 [ 2263.116706] device_release_driver_internal+0x18f/0x1f0 [ 2263.117182] bus_remove_device+0xc6/0x130 [ 2263.117576] device_del+0x173/0x3c0 [ 2263.117929] ? vdpa_dev_remove+0x20/0x20 [vdpa] [ 2263.118364] device_unregister+0x1a/0x60 [ 2263.118752] mlx5_vdpa_dev_del+0x4c/0x80 [mlx5_vdpa] [ 2263.119232] vdpa_match_remove+0x21/0x30 [vdpa] [ 2263.119663] bus_for_each_dev+0x71/0xc0 [ 2263.120054] vdpa_mgmtdev_unregister+0x57/0x70 [vdpa] [ 2263.120520] mlx5v_remove+0x12/0x20 [mlx5_vdpa] [ 2263.120953] auxiliary_bus_remove+0x18/0x30 [ 2263.121356] device_release_driver_internal+0x18f/0x1f0 [ 2263.121830] bus_remove_device+0xc6/0x130 [ 2263.122223] device_del+0x173/0x3c0 [ 2263.122581] ? devl_param_driverinit_value_get+0x29/0x90 [ 2263.123070] mlx5_rescan_drivers_locked+0xc4/0x2d0 [mlx5_core] [ 2263.123633] mlx5_unregister_device+0x54/0x80 [mlx5_core] [ 2263.124169] mlx5_uninit_one+0x54/0x150 [mlx5_core] [ 2263.124656] mlx5_sf_dev_remove+0x45/0x90 [mlx5_core] [ 2263.125153] auxiliary_bus_remove+0x18/0x30 [ 2263.125560] device_release_driver_internal+0x18f/0x1f0 [ 2263.126052] bus_remove_device+0xc6/0x130 [ 2263.126451] device_del+0x173/0x3c0 [ 2263.126815] mlx5_sf_dev_remove+0x39/0xf0 [mlx5_core] [ 2263.127318] mlx5_sf_dev_state_change_handler+0x178/0x270 [mlx5_core] [ 2263.127920] blocking_notifier_call_chain+0x5a/0x80 [ 2263.128379] mlx5_vhca_state_work_handler+0x151/0x200 [mlx5_core] [ 2263.128951] process_one_work+0x1bb/0x3c0 [ 2263.129355] ? process_one_work+0x3c0/0x3c0 [ 2263.129766] worker_thread+0x4d/0x3c0 [ 2263.130140] ? process_one_work+0x3c0/0x3c0 [ 2263.130548] kthread+0xb9/0xe0 [ 2263.130895] ? kthread_complete_and_exit+0x20/0x20 [ 2263.131349] ret_from_fork+0x1f/0x30 [ 2263.131717] </TASK> The fix is to disable and destroy the workqueue after the device unregister. It is expected that vhost will not trigger kicks after the unregister. But even if it would, the wq is disabled already by setting the pointer to NULL (done so in the referenced commit). Fixes: ad6dc1d ("vdpa/mlx5: Avoid processing works if workqueue was destroyed") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Message-Id: <20230516095800.3549932-1-dtatulea@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Acked-by: Jason Wang <jasowang@redhat.com>

Give the bus_lock and msg_lock of each bus a different unique key so that it is possible to acquire the locks of multiple buses without lockdep asserting a possible deadlock. Using mutex_init() to initialize a mutex gives all those mutexes the same lock class. Lockdep checking treats it as an error to attempt to take a mutex while already holding a mutex of the same class. This causes a lockdep assert when sdw_acquire_bus_lock() attempts to lock multiple buses, and when do_bank_switch() takes multiple msg_lock. [ 138.697350] WARNING: possible recursive locking detected [ 138.697366] 6.3.0-test #1 Tainted: G E [ 138.697380] -------------------------------------------- [ 138.697394] play/903 is trying to acquire lock: [ 138.697409] ffff99b8c41aa8c8 (&bus->bus_lock){+.+.}-{3:3}, at: sdw_prepare_stream+0x52/0x2e0 [ 138.697443] but task is already holding lock: [ 138.697468] ffff99b8c41af8c8 (&bus->bus_lock){+.+.}-{3:3}, at: sdw_prepare_stream+0x52/0x2e0 [ 138.697493] other info that might help us debug this: [ 138.697521] Possible unsafe locking scenario: [ 138.697540] CPU0 [ 138.697550] ---- [ 138.697559] lock(&bus->bus_lock); [ 138.697570] lock(&bus->bus_lock); [ 138.697581] *** DEADLOCK *** Giving each mutex a unique key allows multiple to be held without triggering a lockdep assert. But note that it does not allow them to be taken in one order then a different order. If two mutexes are taken in the order A, B then they must always be taken in that order otherwise they could deadlock. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230615141208.679011-1-rf@opensource.cirrus.com Signed-off-by: Vinod Koul <vkoul@kernel.org>

The pcm state can be SNDRV_PCM_STATE_DISCONNECTED at disconnect callback, and there is not an entry of SNDRV_PCM_STATE_DISCONNECTED in snd_pcm_state_names. This patch adds the missing entry to resolve this issue. cat /proc/asound/card2/pcm0p/sub0/status That results in stack traces like the following: [ 99.702732][ T5171] Unexpected kernel BRK exception at EL1 [ 99.702774][ T5171] Internal error: BRK handler: f2005512 [#1] PREEMPT SMP [ 99.703858][ T5171] Modules linked in: bcmdhd(E) (...) [ 99.747425][ T5171] CPU: 3 PID: 5171 Comm: cat Tainted: G C OE 5.10.189-android13-4-00003-g4a17384380d8-ab11086999 #1 [ 99.748447][ T5171] Hardware name: Rockchip RK3588 CVTE V10 Board (DT) [ 99.749024][ T5171] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 99.749616][ T5171] pc : snd_pcm_substream_proc_status_read+0x264/0x2bc [ 99.750204][ T5171] lr : snd_pcm_substream_proc_status_read+0xa4/0x2bc [ 99.750778][ T5171] sp : ffffffc0175abae0 [ 99.751132][ T5171] x29: ffffffc0175abb80 x28: ffffffc009a2c498 [ 99.751665][ T5171] x27: 0000000000000001 x26: ffffff810cbae6e8 [ 99.752199][ T5171] x25: 0000000000400cc0 x24: ffffffc0175abc60 [ 99.752729][ T5171] x23: 0000000000000000 x22: ffffff802f558400 [ 99.753263][ T5171] x21: ffffff81d8d8ff00 x20: ffffff81020cdc00 [ 99.753795][ T5171] x19: ffffff802d110000 x18: ffffffc014fbd058 [ 99.754326][ T5171] x17: 0000000000000000 x16: 0000000000000000 [ 99.754861][ T5171] x15: 000000000000c276 x14: ffffffff9a976fda [ 99.755392][ T5171] x13: 0000000065689089 x12: 000000000000d72e [ 99.755923][ T5171] x11: ffffff802d110000 x10: 00000000000000e0 [ 99.756457][ T5171] x9 : 9c431600c8385d00 x8 : 0000000000000008 [ 99.756990][ T5171] x7 : 0000000000000000 x6 : 000000000000003f [ 99.757522][ T5171] x5 : 0000000000000040 x4 : ffffffc0175abb70 [ 99.758056][ T5171] x3 : 0000000000000001 x2 : 0000000000000001 [ 99.758588][ T5171] x1 : 0000000000000000 x0 : 0000000000000000 [ 99.759123][ T5171] Call trace: [ 99.759404][ T5171] snd_pcm_substream_proc_status_read+0x264/0x2bc [ 99.759958][ T5171] snd_info_seq_show+0x54/0xa4 [ 99.760370][ T5171] seq_read_iter+0x19c/0x7d4 [ 99.760770][ T5171] seq_read+0xf0/0x128 [ 99.761117][ T5171] proc_reg_read+0x100/0x1f8 [ 99.761515][ T5171] vfs_read+0xf4/0x354 [ 99.761869][ T5171] ksys_read+0x7c/0x148 [ 99.762226][ T5171] __arm64_sys_read+0x20/0x30 [ 99.762625][ T5171] el0_svc_common+0xd0/0x1e4 [ 99.763023][ T5171] el0_svc+0x28/0x98 [ 99.763358][ T5171] el0_sync_handler+0x8c/0xf0 [ 99.763759][ T5171] el0_sync+0x1b8/0x1c0 [ 99.764118][ T5171] Code: d65f03c0 b9406102 17ffffae 94191565 (d42aa240) [ 99.764715][ T5171] ---[ end trace 1eeffa3e17c58e10 ]--- [ 99.780720][ T5171] Kernel panic - not syncing: BRK handler: Fatal exception Signed-off-by: Jason Zhang <jason.zhang@rock-chips.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20231206013139.20506-1-jason.zhang@rock-chips.com Signed-off-by: Takashi Iwai <tiwai@suse.de>

If the module can load the RCA but not the firmware binary, it will call the cleanup functions. Then unloading the module causes general protection fault due to double free. Do not call the cleanup functions in tasdev_fw_ready. general protection fault, probably for non-canonical address 0x6f2b8a2bff4c8fec: 0000 [#1] PREEMPT SMP NOPTI Call Trace: <TASK> ? die_addr+0x36/0x90 ? exc_general_protection+0x1c5/0x430 ? asm_exc_general_protection+0x26/0x30 ? tasdevice_config_info_remove+0x6d/0xd0 [snd_soc_tas2781_fmwlib] tas2781_hda_unbind+0xaa/0x100 [snd_hda_scodec_tas2781_i2c] component_unbind+0x2e/0x50 component_unbind_all+0x92/0xa0 component_del+0xa8/0x140 tas2781_hda_remove.isra.0+0x32/0x60 [snd_hda_scodec_tas2781_i2c] i2c_device_remove+0x26/0xb0 Fixes: 5be27f1 ("ALSA: hda/tas2781: Add tas2781 HDA driver") CC: stable@vger.kernel.org Signed-off-by: Gergo Koteles <soyer@irl.hu> Link: https://lore.kernel.org/r/1a0885c424bb21172702d254655882b59ef6477a.1702510018.git.soyer@irl.hu Signed-off-by: Takashi Iwai <tiwai@suse.de>

The Focusrite Scarlett Gen 4 Solo has Air and Phantom Power controls on analogue input thesofproject#2 (the Gen 3 Solo had these controls on analogue input #1). Add air_input_first and phantom_first device info options to cater for this. These options are similar to the level_input_first option that was added for the Gen 3 Solo, but these new options do not require adjusting the index of the control. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/19511f18895b8c094985a4a5691fbc1dc028c108.1703612638.git.g@b4.vu

Fabrice Gasnier and others added 30 commits March 17, 2018 22:32

i2c: xlp9xx: Add MAINTAINERS entry

f3c6a2c

The i2c XLP9xx driver is maintained by Cavium. Add George Cherian and Jan Glauber as the Maintainers. Signed-off-by: George Cherian <george.cherian@cavium.com> Acked-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

nds32: Fix the unknown type u8 issue.

bb91267

It broke the 'allmodconfig' build. We need to include <linux/types.h> to make sure the type is defined before using it. Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>

nds32: To refine readability of INT_MASK_INITAIAL_VAL

8769c22

Refine readability of INT_MASK_INITAIAL_VAL with meaningful macro instead of magic number. Signed-off-by: Greentime Hu <greentime@andestech.com>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

update #1

update #1

RanderWang commented Jun 28, 2018

update #1

update #1

Conversation

RanderWang commented Jun 28, 2018