Skip to content

Sidecar container that watches Kubernetes VolumeAttachment objects and triggers ControllerPublish/Unpublish against a CSI endpoint

License

Notifications You must be signed in to change notification settings

yuga711/external-attacher

 
 

Repository files navigation

Build Status

CSI attacher

The external-attacher is a sidecar container that attaches volumes to nodes by calling ControllerPublish and ControlerUnpublish functions of CSI drivers. It is necessary because internal Attach/Detach controller running in Kubernetes controller-manager does not have any direct interfaces to CSI drivers.

Terminology

In Kubernetes, the term attach means 3rd party volume attachment to a node. This is common in cloud environments, where the cloud API is able to attach a volume to a node without any code running on the node. In CSI terminology, this corresponds to the ControllerPublish call.

Detach is the reverse operation, 3rd party volume detachment from a node, ControllerUnpublish in CSI terminology.

It is not an attach/detach operation performed by a code running on a node, such as an attachment of iSCSI or Fibre Channel volumes. These are typically performed during NodeStage and NodeUnstage CSI calls and are not done by the external-attacher.

Overview

The external-attacher is an external controller that monitors VolumeAttachment objects created by controller-manager and attaches/detaches volumes to/from nodes (i.e. calls ControllerPublish/ControllerUnpublish. Full design can be found at Kubernetes proposal at container-storage-interface.md

Compatibility

This information reflects the head of this branch.

Compatible with CSI Version Container Image Min K8s Version Recommended K8s Version
CSI Spec v1.2.0 k8s.gcr.io/sig-storage/csi-attacher 1.17 1.17

Feature Status

Various external-attacher releases come with different alpha / beta features.

The following table reflects the head of this branch.

Feature Status Default Description
CSIMigration* Beta On Migrating in-tree volume plugins to CSI.

*) There is no special feature gate for this feature. It is enabled by turning on the corresponding features in Kubernetes.

All other external-attacher features and the external-attacher itself is considered GA and fully supported.

Usage

It is necessary to create a new service account and give it enough privileges to run the external-attacher, see deploy/kubernetes/rbac.yaml. The attacher is then deployed as single Deployment as illustrated below:

kubectl create deploy/kubernetes/deployment.yaml

The external-attacher may run in the same pod with other external CSI controllers such as the external-provisioner, external-snapshotter and/or external-resizer.

Note that the external-attacher does not scale with more replicas. Only one external-attacher is elected as leader and running. The others are waiting for the leader to die. They re-elect a new active leader in ~15 seconds after death of the old leader.

Command line options

Important optional arguments that are highly recommended to be used

  • --csi-address <path to CSI socket>: This is the path to the CSI driver socket inside the pod that the external-attacher container will use to issue CSI operations (/run/csi/socket is used by default).

  • --leader-election: Enables leader election. This is useful when there are multiple replicas of the same external-attacher running for one CSI driver. Only one of them may be active (=leader). A new leader will be re-elected when current leader dies or becomes unresponsive for ~15 seconds.

  • --leader-election-namespace <namespace>: Namespace where the external-attacher runs and where leader election object will be created. It is recommended that this parameter is populated from Kubernetes DownwardAPI.

  • --timeout <duration>: Timeout of all calls to CSI driver. It should be set to value that accommodates majority of ControllerPublish and ControllerUnpublish calls. See CSI error and timeout handling for details. 15 seconds is used by default.

  • --worker-threads: The number of goroutines for processing VolumeAttachments. 10 workers is used by default.

  • --retry-interval-start: The exponential backoff for failures. See CSI error and timeout handling for details. 1 second is used by default.

  • --retry-interval-max: The exponential backoff maximum value. See CSI error and timeout handling for details. 5 minutes is used by default.

  • --metrics-address: The TCP network address where the prometheus metrics endpoint will run (example: :8080 which corresponds to port 8080 on local host). The default is empty string, which means metrics endpoint is disabled.

  • --metrics-path: The HTTP path where prometheus metrics will be exposed. Default is /metrics.

  • --reconcile-sync: Resync frequency of the attached volumes with the driver. See Periodic re-sync for details. 1 minute is used by default.

Other recognized arguments

  • --kubeconfig <path>: Path to Kubernetes client configuration that the external-attacher uses to connect to Kubernetes API server. When omitted, default token provided by Kubernetes will be used. This option is useful only when the external-attacher does not run as a Kubernetes pod, e.g. for debugging.

  • --resync <duration>: Internal resync interval when the external-attacher re-evaluates all existing VolumeAttachment instances and tries to fulfill them, i.e. attach / detach corresponding volumes. It does not affect re-tries of failed CSI calls! It should be used only when there is a bug in Kubernetes watch logic.

  • --version: Prints current external-attacher version and quits.

  • All glog / klog arguments are supported, such as -v <log level> or -alsologtostderr.

CSI error and timeout handling

The external-attacher invokes all gRPC calls to CSI driver with timeout provided by --timeout command line argument (15 seconds by default).

  • ControllerPublish: The call might have timed out just before the driver attached a volume and was sending a response. From that reason, timeouts from ControllerPublish is considered as "volume may be attached" or "volume is being attached in the background." The external-attacher will re-try calling ControllerPublish after exponential backoff until it gets either successful response or final (non-timeout) error that the volume cannot be attached.
  • ControllerUnpublish: This is similar to ControllerPublish, The external-attacher will re-try calling ControllerUnpublish with exponential backoff after timeout until it gets either successful response or a final error that the volume cannot be detached.
  • Probe: The external-attacher re-tries calling Probe until the driver reports it's ready. It re-tries also when it receives timeout from Probe call. The external-attacher has no limit of retries. It is expected that ReadinessProbe on the driver container will catch case when the driver takes too long time to get ready.
  • GetPluginInfo, GetPluginCapabilitiesRequest, ControllerGetCapabilities: The external-attacher expects that these calls are quick and does not retry them on any error, including timeout. Instead, it assumes that the driver is faulty and exits. Note that Kubernetes will likely start a new attacher container and it will start with Probe call.

Correct timeout value depends on the storage backend and how quickly it is able to processes ControllerPublish and ControllerUnpublish calls. The value should be set to accommodate majority of them. It is fine if some calls time out - such calls will be re-tried after exponential backoff (starting with --retry-interval-start), however, this backoff will introduce delay when the call times out several times for a single volume (up to --retry-interval-max).

Periodic re-sync

When CSI driver supports LIST_VOLUMES and LIST_VOLUMES_PUBLISHED_NODES capabilities, the external attacher periodically syncs volume attachments requested by Kubernetes with the actual state reported by CSI driver. Volumes detached by any 3rd party, but still required to be attached by Kubernetes, will be re-attached back. Frequency of this re-sync is controlled by --reconcile-sync command line parameter.

Community, discussion, contribution, and support

Learn how to engage with the Kubernetes community on the community page.

You can reach the maintainers of this project at:

Code of conduct

Participation in the Kubernetes community is governed by the Kubernetes Code of Conduct.

About

Sidecar container that watches Kubernetes VolumeAttachment objects and triggers ControllerPublish/Unpublish against a CSI endpoint

Resources

License

Code of conduct

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Go 65.9%
  • Shell 29.4%
  • Makefile 4.6%
  • Dockerfile 0.1%