rm redundant empty line #49
Closed
+0
−1
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
a completely trivial patch to remove a completely redundant blank line.
|
Ignore |
mturquette
pushed a commit
to mturquette/linux
that referenced
this pull request
Oct 6, 2013
Quit from splice_write if pipe->nrbufs is 0 for avoiding oops in virtio-serial. When an application was doing splice from a kernel buffer to virtio-serial on a guest, the application received signal(SIGINT). This situation will normally happen, but the kernel executed a kernel panic by oops as follows: BUG: unable to handle kernel paging request at ffff882071c8ef28 IP: [<ffffffff812de48f>] sg_init_table+0x2f/0x50 PGD 1fac067 PUD 0 Oops: 0000 [#1] SMP Modules linked in: lockd sunrpc bnep bluetooth rfkill ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_timer snd microcode virtio_balloon virtio_net pcspkr soundcore i2c_piix4 i2c_core uinput floppy CPU: 1 PID: 908 Comm: trace-cmd Not tainted 3.10.0+ torvalds#49 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 task: ffff880071c64650 ti: ffff88007bf24000 task.ti: ffff88007bf24000 RIP: 0010:[<ffffffff812de48f>] [<ffffffff812de48f>] sg_init_table+0x2f/0x50 RSP: 0018:ffff88007bf25dd8 EFLAGS: 00010286 RAX: 0000001fffffffe0 RBX: ffff882071c8ef28 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880071c8ef48 RBP: ffff88007bf25de8 R08: ffff88007fd15d40 R09: ffff880071c8ef48 R10: ffffea0001c71040 R11: ffffffff8139c555 R12: 0000000000000000 R13: ffff88007506a3c0 R14: ffff88007c862500 R15: ffff880071c8ef00 FS: 00007f0a3646c740(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff882071c8ef28 CR3: 000000007acbb000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff880071c8ef48 ffff88007bf25e20 ffff88007bf25e88 ffffffff8139d6fa ffff88007bf25e28 ffffffff8127a3f4 0000000000000000 0000000000000000 ffff880071c8ef48 0000100000000000 0000000000000003 ffff88007bf25e08 Call Trace: [<ffffffff8139d6fa>] port_fops_splice_write+0xaa/0x130 [<ffffffff8127a3f4>] ? selinux_file_permission+0xc4/0x120 [<ffffffff8139d650>] ? wait_port_writable+0x1b0/0x1b0 [<ffffffff811a6fe0>] do_splice_from+0xa0/0x110 [<ffffffff811a951f>] SyS_splice+0x5ff/0x6b0 [<ffffffff8161f8c2>] system_call_fastpath+0x16/0x1b Code: c1 e2 05 48 89 e5 48 83 ec 10 4c 89 65 f8 41 89 f4 31 f6 48 89 5d f0 48 89 fb e8 8d ce ff ff 41 8d 44 24 ff 48 c1 e0 05 48 01 c3 <48> 8b 03 48 83 e0 fe 48 83 c8 02 48 89 03 48 8b 5d f0 4c 8b 65 RIP [<ffffffff812de48f>] sg_init_table+0x2f/0x50 RSP <ffff88007bf25dd8> CR2: ffff882071c8ef28 ---[ end trace 86323505eb42ea8f ]--- It seems to induce pagefault in sg_init_tabel() when pipe->nrbufs is equal to zero. This may happen in a following situation: (1) The application normally does splice(read) from a kernel buffer, then does splice(write) to virtio-serial. (2) The application receives SIGINT when is doing splice(read), so splice(read) is failed by EINTR. However, the application does not finish the operation. (3) The application tries to do splice(write) without pipe->nrbufs. (4) The virtio-console driver tries to touch scatterlist structure sgl in sg_init_table(), but the region is out of bound. To avoid the case, a kernel should check whether pipe->nrbufs is empty or not when splice_write is executed in the virtio-console driver. V3: Add Reviewed-by lines and stable@ line in sign-off area. Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Amit Shah <amit.shah@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
swarren
pushed a commit
to swarren/linux-tegra
that referenced
this pull request
Oct 14, 2013
As the new x86 CPU bootup printout format code maintainer, I am taking immediate action to improve and clean (and thus indulge my OCD) the reporting of the cores when coming up online. Fix padding to a right-hand alignment, cleanup code and bind reporting width to the max number of supported CPUs on the system, like this: [ 0.074509] smpboot: Booting Node 0, Processors: #1 #2 #3 #4 #5 torvalds#6 torvalds#7 OK [ 0.644008] smpboot: Booting Node 1, Processors: torvalds#8 torvalds#9 torvalds#10 torvalds#11 torvalds#12 torvalds#13 torvalds#14 torvalds#15 OK [ 1.245006] smpboot: Booting Node 2, Processors: torvalds#16 torvalds#17 torvalds#18 torvalds#19 torvalds#20 torvalds#21 torvalds#22 torvalds#23 OK [ 1.864005] smpboot: Booting Node 3, Processors: torvalds#24 torvalds#25 torvalds#26 torvalds#27 torvalds#28 torvalds#29 torvalds#30 torvalds#31 OK [ 2.489005] smpboot: Booting Node 4, Processors: torvalds#32 torvalds#33 torvalds#34 torvalds#35 torvalds#36 torvalds#37 torvalds#38 torvalds#39 OK [ 3.093005] smpboot: Booting Node 5, Processors: torvalds#40 torvalds#41 torvalds#42 torvalds#43 torvalds#44 torvalds#45 torvalds#46 torvalds#47 OK [ 3.698005] smpboot: Booting Node 6, Processors: torvalds#48 torvalds#49 torvalds#50 torvalds#51 #52 #53 torvalds#54 torvalds#55 OK [ 4.304005] smpboot: Booting Node 7, Processors: torvalds#56 torvalds#57 #58 torvalds#59 torvalds#60 torvalds#61 torvalds#62 torvalds#63 OK [ 4.961413] Brought up 64 CPUs and this: [ 0.072367] smpboot: Booting Node 0, Processors: #1 #2 #3 #4 #5 torvalds#6 torvalds#7 OK [ 0.686329] Brought up 8 CPUs Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Libin <huawei.libin@huawei.com> Cc: wangyijing@huawei.com Cc: fenghua.yu@intel.com Cc: guohanjun@huawei.com Cc: paul.gortmaker@windriver.com Link: http://lkml.kernel.org/r/20130927143554.GF4422@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
swarren
pushed a commit
to swarren/linux-tegra
that referenced
this pull request
Oct 14, 2013
Turn it into (for example): [ 0.073380] x86: Booting SMP configuration: [ 0.074005] .... node #0, CPUs: #1 #2 #3 #4 #5 torvalds#6 torvalds#7 [ 0.603005] .... node #1, CPUs: torvalds#8 torvalds#9 torvalds#10 torvalds#11 torvalds#12 torvalds#13 torvalds#14 torvalds#15 [ 1.200005] .... node #2, CPUs: torvalds#16 torvalds#17 torvalds#18 torvalds#19 torvalds#20 torvalds#21 torvalds#22 torvalds#23 [ 1.796005] .... node #3, CPUs: torvalds#24 torvalds#25 torvalds#26 torvalds#27 torvalds#28 torvalds#29 torvalds#30 torvalds#31 [ 2.393005] .... node #4, CPUs: torvalds#32 torvalds#33 torvalds#34 torvalds#35 torvalds#36 torvalds#37 torvalds#38 torvalds#39 [ 2.996005] .... node #5, CPUs: torvalds#40 torvalds#41 torvalds#42 torvalds#43 torvalds#44 torvalds#45 torvalds#46 torvalds#47 [ 3.600005] .... node torvalds#6, CPUs: torvalds#48 torvalds#49 torvalds#50 torvalds#51 #52 #53 torvalds#54 torvalds#55 [ 4.202005] .... node torvalds#7, CPUs: torvalds#56 torvalds#57 #58 torvalds#59 torvalds#60 torvalds#61 torvalds#62 torvalds#63 [ 4.811005] .... node torvalds#8, CPUs: torvalds#64 torvalds#65 torvalds#66 torvalds#67 torvalds#68 torvalds#69 #70 torvalds#71 [ 5.421006] .... node torvalds#9, CPUs: torvalds#72 torvalds#73 torvalds#74 torvalds#75 torvalds#76 torvalds#77 torvalds#78 torvalds#79 [ 6.032005] .... node torvalds#10, CPUs: torvalds#80 torvalds#81 torvalds#82 torvalds#83 torvalds#84 torvalds#85 torvalds#86 torvalds#87 [ 6.648006] .... node torvalds#11, CPUs: torvalds#88 torvalds#89 torvalds#90 torvalds#91 torvalds#92 torvalds#93 torvalds#94 torvalds#95 [ 7.262005] .... node torvalds#12, CPUs: torvalds#96 torvalds#97 torvalds#98 torvalds#99 torvalds#100 torvalds#101 torvalds#102 torvalds#103 [ 7.865005] .... node torvalds#13, CPUs: torvalds#104 torvalds#105 torvalds#106 torvalds#107 torvalds#108 torvalds#109 torvalds#110 torvalds#111 [ 8.466005] .... node torvalds#14, CPUs: torvalds#112 torvalds#113 torvalds#114 torvalds#115 torvalds#116 torvalds#117 torvalds#118 torvalds#119 [ 9.073006] .... node torvalds#15, CPUs: torvalds#120 torvalds#121 torvalds#122 torvalds#123 torvalds#124 torvalds#125 torvalds#126 torvalds#127 [ 9.679901] x86: Booted up 16 nodes, 128 CPUs and drop useless elements. Change num_digits() to hpa's division-avoiding, cell-phone-typed version which he went at great lengths and pains to submit on a Saturday evening. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: huawei.libin@huawei.com Cc: wangyijing@huawei.com Cc: fenghua.yu@intel.com Cc: guohanjun@huawei.com Cc: paul.gortmaker@windriver.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20130930095624.GB16383@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
shr-buildhost
pushed a commit
to shr-distribution/linux
that referenced
this pull request
Nov 2, 2013
Fuzzing with trinity hit the "impossible" VM_BUG_ON(error) (which Fedora has converted to WARNING) in shmem_getpage_gfp(): WARNING: at mm/shmem.c:1151 shmem_getpage_gfp+0xa5c/0xa70() Pid: 29795, comm: trinity-child4 Not tainted 3.7.0-rc2+ torvalds#49 Call Trace: warn_slowpath_common+0x7f/0xc0 warn_slowpath_null+0x1a/0x20 shmem_getpage_gfp+0xa5c/0xa70 shmem_fault+0x4f/0xa0 __do_fault+0x71/0x5c0 handle_pte_fault+0x97/0xae0 handle_mm_fault+0x289/0x350 __do_page_fault+0x18e/0x530 do_page_fault+0x2b/0x50 page_fault+0x28/0x30 tracesys+0xe1/0xe6 Thanks to Johannes for pointing to truncation: free_swap_and_cache() only does a trylock on the page, so the page lock we've held since before confirming swap is not enough to protect against truncation. What cleanup is needed in this case? Just delete_from_swap_cache(), which takes care of the memcg uncharge. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Dave Jones <davej@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mdrjr
referenced
this pull request
in hardkernel/linux
Nov 21, 2013
commit 68c034f upstream. Quit from splice_write if pipe->nrbufs is 0 for avoiding oops in virtio-serial. When an application was doing splice from a kernel buffer to virtio-serial on a guest, the application received signal(SIGINT). This situation will normally happen, but the kernel executed a kernel panic by oops as follows: BUG: unable to handle kernel paging request at ffff882071c8ef28 IP: [<ffffffff812de48f>] sg_init_table+0x2f/0x50 PGD 1fac067 PUD 0 Oops: 0000 [#1] SMP Modules linked in: lockd sunrpc bnep bluetooth rfkill ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_timer snd microcode virtio_balloon virtio_net pcspkr soundcore i2c_piix4 i2c_core uinput floppy CPU: 1 PID: 908 Comm: trace-cmd Not tainted 3.10.0+ #49 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 task: ffff880071c64650 ti: ffff88007bf24000 task.ti: ffff88007bf24000 RIP: 0010:[<ffffffff812de48f>] [<ffffffff812de48f>] sg_init_table+0x2f/0x50 RSP: 0018:ffff88007bf25dd8 EFLAGS: 00010286 RAX: 0000001fffffffe0 RBX: ffff882071c8ef28 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880071c8ef48 RBP: ffff88007bf25de8 R08: ffff88007fd15d40 R09: ffff880071c8ef48 R10: ffffea0001c71040 R11: ffffffff8139c555 R12: 0000000000000000 R13: ffff88007506a3c0 R14: ffff88007c862500 R15: ffff880071c8ef00 FS: 00007f0a3646c740(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff882071c8ef28 CR3: 000000007acbb000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff880071c8ef48 ffff88007bf25e20 ffff88007bf25e88 ffffffff8139d6fa ffff88007bf25e28 ffffffff8127a3f4 0000000000000000 0000000000000000 ffff880071c8ef48 0000100000000000 0000000000000003 ffff88007bf25e08 Call Trace: [<ffffffff8139d6fa>] port_fops_splice_write+0xaa/0x130 [<ffffffff8127a3f4>] ? selinux_file_permission+0xc4/0x120 [<ffffffff8139d650>] ? wait_port_writable+0x1b0/0x1b0 [<ffffffff811a6fe0>] do_splice_from+0xa0/0x110 [<ffffffff811a951f>] SyS_splice+0x5ff/0x6b0 [<ffffffff8161f8c2>] system_call_fastpath+0x16/0x1b Code: c1 e2 05 48 89 e5 48 83 ec 10 4c 89 65 f8 41 89 f4 31 f6 48 89 5d f0 48 89 fb e8 8d ce ff ff 41 8d 44 24 ff 48 c1 e0 05 48 01 c3 <48> 8b 03 48 83 e0 fe 48 83 c8 02 48 89 03 48 8b 5d f0 4c 8b 65 RIP [<ffffffff812de48f>] sg_init_table+0x2f/0x50 RSP <ffff88007bf25dd8> CR2: ffff882071c8ef28 ---[ end trace 86323505eb42ea8f ]--- It seems to induce pagefault in sg_init_tabel() when pipe->nrbufs is equal to zero. This may happen in a following situation: (1) The application normally does splice(read) from a kernel buffer, then does splice(write) to virtio-serial. (2) The application receives SIGINT when is doing splice(read), so splice(read) is failed by EINTR. However, the application does not finish the operation. (3) The application tries to do splice(write) without pipe->nrbufs. (4) The virtio-console driver tries to touch scatterlist structure sgl in sg_init_table(), but the region is out of bound. To avoid the case, a kernel should check whether pipe->nrbufs is empty or not when splice_write is executed in the virtio-console driver. V3: Add Reviewed-by lines and stable@ line in sign-off area. Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Amit Shah <amit.shah@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
torvalds
pushed a commit
that referenced
this pull request
Dec 2, 2013
It's no good setting vga_base after the VGA console has been initialised, because if we do that we get this: Unable to handle kernel paging request at virtual address 000b8000 pgd = c0004000 [000b8000] *pgd=07ffc831, *pte=00000000, *ppte=00000000 0Internal error: Oops: 5017 [#1] ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 3.12.0+ #49 task: c03e2974 ti: c03d8000 task.ti: c03d8000 PC is at vgacon_startup+0x258/0x39c LR is at request_resource+0x10/0x1c pc : [<c01725d0>] lr : [<c0022b50>] psr: 60000053 sp : c03d9f68 ip : 000b8000 fp : c03d9f8c r10: 000055aa r9 : 4401a103 r8 : ffffaa55 r7 : c03e357c r6 : c051b460 r5 : 000000ff r4 : 000c0000 r3 : 000b8000 r2 : c03e0514 r1 : 00000000 r0 : c0304971 Flags: nZCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel which is an access to the 0xb8000 without the PCI offset required to make it work. Fixes: cc22b4c ("ARM: set vga memory base at run-time") Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: <stable@vger.kernel.org>
ystk
pushed a commit
to ystk/linux-ltsi-work
that referenced
this pull request
Dec 16, 2013
commit 4365922 upstream. It's no good setting vga_base after the VGA console has been initialised, because if we do that we get this: Unable to handle kernel paging request at virtual address 000b8000 pgd = c0004000 [000b8000] *pgd=07ffc831, *pte=00000000, *ppte=00000000 0Internal error: Oops: 5017 [#1] ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 3.12.0+ torvalds#49 task: c03e2974 ti: c03d8000 task.ti: c03d8000 PC is at vgacon_startup+0x258/0x39c LR is at request_resource+0x10/0x1c pc : [<c01725d0>] lr : [<c0022b50>] psr: 60000053 sp : c03d9f68 ip : 000b8000 fp : c03d9f8c r10: 000055aa r9 : 4401a103 r8 : ffffaa55 r7 : c03e357c r6 : c051b460 r5 : 000000ff r4 : 000c0000 r3 : 000b8000 r2 : c03e0514 r1 : 00000000 r0 : c0304971 Flags: nZCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel which is an access to the 0xb8000 without the PCI offset required to make it work. Fixes: cc22b4c ("ARM: set vga memory base at run-time") Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
baerwolf
pushed a commit
to baerwolf/linux-stephan
that referenced
this pull request
Jan 5, 2014
commit 4365922 upstream. It's no good setting vga_base after the VGA console has been initialised, because if we do that we get this: Unable to handle kernel paging request at virtual address 000b8000 pgd = c0004000 [000b8000] *pgd=07ffc831, *pte=00000000, *ppte=00000000 0Internal error: Oops: 5017 [#1] ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 3.12.0+ torvalds#49 task: c03e2974 ti: c03d8000 task.ti: c03d8000 PC is at vgacon_startup+0x258/0x39c LR is at request_resource+0x10/0x1c pc : [<c01725d0>] lr : [<c0022b50>] psr: 60000053 sp : c03d9f68 ip : 000b8000 fp : c03d9f8c r10: 000055aa r9 : 4401a103 r8 : ffffaa55 r7 : c03e357c r6 : c051b460 r5 : 000000ff r4 : 000c0000 r3 : 000b8000 r2 : c03e0514 r1 : 00000000 r0 : c0304971 Flags: nZCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel which is an access to the 0xb8000 without the PCI offset required to make it work. Fixes: cc22b4c ("ARM: set vga memory base at run-time") Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
mdrjr
referenced
this pull request
in hardkernel/linux
Feb 1, 2014
commit 4365922 upstream. It's no good setting vga_base after the VGA console has been initialised, because if we do that we get this: Unable to handle kernel paging request at virtual address 000b8000 pgd = c0004000 [000b8000] *pgd=07ffc831, *pte=00000000, *ppte=00000000 0Internal error: Oops: 5017 [#1] ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 3.12.0+ #49 task: c03e2974 ti: c03d8000 task.ti: c03d8000 PC is at vgacon_startup+0x258/0x39c LR is at request_resource+0x10/0x1c pc : [<c01725d0>] lr : [<c0022b50>] psr: 60000053 sp : c03d9f68 ip : 000b8000 fp : c03d9f8c r10: 000055aa r9 : 4401a103 r8 : ffffaa55 r7 : c03e357c r6 : c051b460 r5 : 000000ff r4 : 000c0000 r3 : 000b8000 r2 : c03e0514 r1 : 00000000 r0 : c0304971 Flags: nZCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel which is an access to the 0xb8000 without the PCI offset required to make it work. Fixes: cc22b4c ("ARM: set vga memory base at run-time") Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
mdrjr
referenced
this pull request
in hardkernel/linux
May 19, 2014
commit 4365922 upstream. It's no good setting vga_base after the VGA console has been initialised, because if we do that we get this: Unable to handle kernel paging request at virtual address 000b8000 pgd = c0004000 [000b8000] *pgd=07ffc831, *pte=00000000, *ppte=00000000 0Internal error: Oops: 5017 [#1] ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 3.12.0+ #49 task: c03e2974 ti: c03d8000 task.ti: c03d8000 PC is at vgacon_startup+0x258/0x39c LR is at request_resource+0x10/0x1c pc : [<c01725d0>] lr : [<c0022b50>] psr: 60000053 sp : c03d9f68 ip : 000b8000 fp : c03d9f8c r10: 000055aa r9 : 4401a103 r8 : ffffaa55 r7 : c03e357c r6 : c051b460 r5 : 000000ff r4 : 000c0000 r3 : 000b8000 r2 : c03e0514 r1 : 00000000 r0 : c0304971 Flags: nZCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel which is an access to the 0xb8000 without the PCI offset required to make it work. Fixes: cc22b4c ("ARM: set vga memory base at run-time") Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
JoonsooKim
pushed a commit
to JoonsooKim/linux
that referenced
this pull request
Nov 26, 2014
…robe While working on a different issue, I noticed an annoying use after free bug on my machine when unloading the ixgbe driver: [ 8642.318797] ixgbe 0000:02:00.1: removed PHC on p2p2 [ 8642.742716] ixgbe 0000:02:00.1: complete [ 8642.743784] BUG: unable to handle kernel paging request at ffff8807d3740a90 [ 8642.744828] IP: [<ffffffffa01c77dc>] ixgbe_remove+0xfc/0x1b0 [ixgbe] [ 8642.745886] PGD 20c6067 PUD 81c1f6067 PMD 81c15a067 PTE 80000007d3740060 [ 8642.746956] Oops: 0002 [#1] SMP DEBUG_PAGEALLOC [ 8642.748039] Modules linked in: [...] [ 8642.752929] CPU: 1 PID: 1225 Comm: rmmod Not tainted 3.18.0-rc2+ torvalds#49 [ 8642.754203] Hardware name: Supermicro X10SLM-F/X10SLM-F, BIOS 1.1b 11/01/2013 [ 8642.755505] task: ffff8807e34d3fe0 ti: ffff8807b7204000 task.ti: ffff8807b7204000 [ 8642.756831] RIP: 0010:[<ffffffffa01c77dc>] [<ffffffffa01c77dc>] ixgbe_remove+0xfc/0x1b0 [ixgbe] [...] [ 8642.774335] Stack: [ 8642.775805] ffff8807ee824098 ffff8807ee824098 ffffffffa01f3000 ffff8807ee824000 [ 8642.777326] ffff8807b7207e18 ffffffff8137720f ffff8807ee824098 ffff8807ee824098 [ 8642.778848] ffffffffa01f3068 ffff8807ee8240f8 ffff8807b7207e38 ffffffff8144180f [ 8642.780365] Call Trace: [ 8642.781869] [<ffffffff8137720f>] pci_device_remove+0x3f/0xc0 [ 8642.783395] [<ffffffff8144180f>] __device_release_driver+0x7f/0xf0 [ 8642.784876] [<ffffffff814421f8>] driver_detach+0xb8/0xc0 [ 8642.786352] [<ffffffff814414a9>] bus_remove_driver+0x59/0xe0 [ 8642.787783] [<ffffffff814429d0>] driver_unregister+0x30/0x70 [ 8642.789202] [<ffffffff81375c65>] pci_unregister_driver+0x25/0xa0 [ 8642.790657] [<ffffffffa01eb38e>] ixgbe_exit_module+0x1c/0xc8e [ixgbe] [ 8642.792064] [<ffffffff810f93a2>] SyS_delete_module+0x132/0x1c0 [ 8642.793450] [<ffffffff81012c61>] ? do_notify_resume+0x61/0xa0 [ 8642.794837] [<ffffffff816d2029>] system_call_fastpath+0x12/0x17 The issue is that test_and_set_bit() done on adapter->state is being performed *after* the netdevice has been freed via free_netdev(). When netdev is being allocated on initialization time, it allocates a private area, here struct ixgbe_adapter, that resides after the net_device structure. In ixgbe_probe(), the device init routine, we set up the adapter after alloc_etherdev_mq() on the private area and add a reference for the pci_dev as well via pci_set_drvdata(). Both in the error path of ixgbe_probe(), but also on module unload when ixgbe_remove() is being called, commit 41c6284 ("ixgbe: Fix rcu warnings induced by LER") accesses adapter after free_netdev(). The patch stores the result in a bool and thus fixes above oops on my side. Fixes: 41c6284 ("ixgbe: Fix rcu warnings induced by LER") Cc: stable <stable@vger.kernel.org> Cc: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
aryabinin
referenced
this pull request
in aryabinin/linux
Nov 27, 2014
GIT 30a727e4802f48182d33e2bdaca586bfb6a62868
commit 6d4e81ed89c092cb156c8d19cb68c8733cd502b3
Author: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Date: Mon Nov 24 10:08:03 2014 +0100
cpufreq: Ref the policy object sooner
Do it before it's assigned to cpufreq_cpu_data, otherwise when a driver
tries to get the cpu frequency during initialization the policy kobj is
referenced and we get this warning:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 64 at include/linux/kref.h:47 kobject_get+0x64/0x70()
Modules linked in:
CPU: 1 PID: 64 Comm: irq/77-tegra-ac Not tainted 3.18.0-rc4-next-20141114ccu-00050-g3eff942 #326
[<c0016fac>] (unwind_backtrace) from [<c001272c>] (show_stack+0x10/0x14)
[<c001272c>] (show_stack) from [<c06085d8>] (dump_stack+0x98/0xd8)
[<c06085d8>] (dump_stack) from [<c002892c>] (warn_slowpath_common+0x84/0xb4)
[<c002892c>] (warn_slowpath_common) from [<c00289f8>] (warn_slowpath_null+0x1c/0x24)
[<c00289f8>] (warn_slowpath_null) from [<c0220290>] (kobject_get+0x64/0x70)
[<c0220290>] (kobject_get) from [<c03e944c>] (cpufreq_cpu_get+0x88/0xc8)
[<c03e944c>] (cpufreq_cpu_get) from [<c03e9500>] (cpufreq_get+0xc/0x64)
[<c03e9500>] (cpufreq_get) from [<c0285288>] (actmon_thread_isr+0x134/0x198)
[<c0285288>] (actmon_thread_isr) from [<c0069008>] (irq_thread_fn+0x1c/0x40)
[<c0069008>] (irq_thread_fn) from [<c0069324>] (irq_thread+0x134/0x174)
[<c0069324>] (irq_thread) from [<c0040290>] (kthread+0xdc/0xf4)
[<c0040290>] (kthread) from [<c000f4b8>] (ret_from_fork+0x14/0x3c)
---[ end trace b7bd64a81b340c59 ]---
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
commit e874bf5f7647a9fdf14d72dbb376ec95327e3a81
Author: Lars-Peter Clausen <lars@metafoo.de>
Date: Tue Nov 25 21:41:03 2014 +0100
ASoC: Disable regmap helpers if regmap is disabled
If regmap is disabled there will be no users of the ASoC regmap helpers.
Furthermore regmap_exit() will no be defined causing the following compile
error:
sound/soc/soc-core.c: In function 'snd_soc_component_exit_regmap':
sound/soc/soc-core.c:2645:2: error: implicit declaration of function
'regmap_exit' [-Werror=implicit-function-declaration]
So disable the helpers if regmap is disabled.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 20feb881988c ASoC: Add helper functions for deferred regmap setup")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
commit a5e9ab291c608c62691b9d565104a30d931998bf
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Tue Nov 25 12:46:39 2014 -0800
Revert "serial: of-serial: add PM suspend/resume support"
This reverts commit 2dea53bf57783f243c892e99c10c6921e956aa7e.
Turns out to be broken :(
Cc: Jingchang Lu <jingchang.lu@freescale.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 86261fdd65ce076c0aa05dbf3f5f5fe10aab1bcf
Author: Petr Cvek <petr.cvek@tul.cz>
Date: Tue Nov 25 06:05:33 2014 +0100
i2c: pxa: add support for SCCB devices
Add support for SCCB by implementing I2C_M_IGNORE_NAK and I2C_M_STOP
flags and advertising functionality flag I2C_FUNC_PROTOCOL_MANGLING.
Also fixed missing functionality flag I2C_FUNC_NOSTART.
Signed-off-by: Petr Cvek <petr.cvek@tul.cz>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
commit 23173eae7b9a5389d3f7031b77cde34f63b814a2
Author: Alexander Kochetkov <al.kochet@gmail.com>
Date: Tue Nov 25 02:20:55 2014 +0400
omap: i2c: don't check bus state IP rev3.3 and earlier
Commit 0f5768bf894f ("i2c: omap: implement workaround for handling
invalid BB-bit values") introduce the error result in boot test fault on
OMAP3530 boards.
The patch fix the error (disable i2c bus test for OMAP3530).
Reported-by: Kevin Hilman <khilman@kernel.org>
Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Fixes: 0f5768bf894f ("i2c: omap: implement workaround for handling invalid BB-bit values")
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
commit a620a6bc1c94c22d6c312892be1e0ae171523125
Author: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Date: Tue Nov 25 14:21:11 2014 -0200
tg3: fix ring init when there are more TX than RX channels
If TX channels are set to 4 and RX channels are set to less than 4,
using ethtool -L, the driver will try to initialize more RX channels
than it has allocated, causing an oops.
This fix only initializes the RX ring if it has been allocated.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 69b93607a9862b1db2f0f2e078e1396f8e20fa9b
Author: Lars-Peter Clausen <lars@metafoo.de>
Date: Tue Nov 25 20:29:40 2014 +0100
ASoC: qi_lb60: Pass flags to gpiod_get()
Pass flags to gpiod_get() to automatically configure the GPIOs. This is shorter
and not passing any flags to gpiod_get() will eventually no longer be supported.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
commit c3658e8d0f10147fc86018be7f11668246c156d3
Author: Eric Dumazet <edumazet@google.com>
Date: Tue Nov 25 07:40:04 2014 -0800
tcp: fix possible NULL dereference in tcp_vX_send_reset()
After commit ca777eff51f7 ("tcp: remove dst refcount false sharing for
prequeue mode") we have to relax check against skb dst in
tcp_v[46]_send_reset() if prequeue dropped the dst.
If a socket is provided, a full lookup was done to find this socket,
so the dst test can be skipped.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88191
Reported-by: Jaša Bartelj <jasa.bartelj@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Daniel Borkmann <dborkman@redhat.com>
Fixes: ca777eff51f7 ("tcp: remove dst refcount false sharing for prequeue mode")
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 7d63a5f9b25ba6b130da8eb2d32a72b1462d0249
Author: Larry Finger <Larry.Finger@lwfinger.net>
Date: Tue Nov 25 10:32:07 2014 -0600
rtlwifi: Change order in device startup
The existing order of steps when starting the PCI devices works for
2.4G devices, but fails to initialize the 5G section of the RTL8821AE
hardware.
This patch is needed to fix the regression reported in Bug #88811
(https://bugzilla.kernel.org/show_bug.cgi?id=88811).
Reported-by: Valerio Passini <valerio.passini@unicam.it>
Tested-by: Valerio Passini <valerio.passini@unicam.it>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Valerio Passini <valerio.passini@unicam.it>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit a91ed1901a80b401afa1b718d941d3450d868151
Author: Larry Finger <Larry.Finger@lwfinger.net>
Date: Tue Nov 25 10:32:06 2014 -0600
rtlwifi: rtl8821ae: Fix 5G detection problem
The changes associated with moving this driver from staging to the regular
tree missed one section setting the allowable rates for the 5GHz band.
This patch is needed to fix the regression reported in Bug #88811
(https://bugzilla.kernel.org/show_bug.cgi?id=88811).
Reported-by: Valerio Passini <valerio.passini@unicam.it>
Tested-by: Valerio Passini <valerio.passini@unicam.it>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Valerio Passini <valerio.passini@unicam.it>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 43612d7c04f1a4f5e60104143918fcdf018b66ee
Author: Pablo Neira <pablo@netfilter.org>
Date: Tue Nov 25 19:54:47 2014 +0100
Revert "netfilter: conntrack: fix race in __nf_conntrack_confirm against get_next_corpse"
This reverts commit 5195c14c8b27cc0b18220ddbf0e5ad3328a04187.
If the conntrack clashes with an existing one, it is left out of
the unconfirmed list, thus, crashing when dropping the packet and
releasing the conntrack since golden rule is that conntracks are
always placed in any of the existing lists for traceability reasons.
Reported-by: Daniel Borkmann <dborkman@redhat.com>
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=88841
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 3dc2b6a8d38cf6c7604ec25f3d50d6ec8da04435
Author: Alexander Duyck <alexander.h.duyck@redhat.com>
Date: Mon Nov 24 20:08:38 2014 -0800
vxlan: Fix boolean flip in VXLAN_F_UDP_ZERO_CSUM6_[TX|RX]
In "vxlan: Call udp_sock_create" there was a logic error that resulted in
the default for IPv6 VXLAN tunnels going from using checksums to not using
checksums. Since there is currently no support in iproute2 for setting
these values it means that a kernel after the change cannot talk over a IPv6
VXLAN tunnel to a kernel prior the change.
Fixes: 3ee64f3 ("vxlan: Call udp_sock_create")
Cc: Tom Herbert <therbert@google.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Acked-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit f3750817a9034bd8cbb5ba583cd544e7cf14c7d8
Author: Alexander Duyck <alexander.h.duyck@redhat.com>
Date: Mon Nov 24 20:08:32 2014 -0800
ip6_udp_tunnel: Fix checksum calculation
The UDP checksum calculation for VXLAN tunnels is currently using the
socket addresses instead of the actual packet source and destination
addresses. As a result the checksum calculated is incorrect in some
cases.
Also uh->check was being set twice, first it was set to 0, and then it is
set again in udp6_set_csum. This change removes the redundant assignment
to 0.
Fixes: acbf74a7 ("vxlan: Refactor vxlan driver to make use of the common UDP tunnel functions.")
Cc: Andy Zhou <azhou@nicira.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 18ca43823f3ce111c6efb8cc90d9f35246527727
Author: Amitkumar Karwar <akarwar@marvell.com>
Date: Tue Nov 25 06:43:06 2014 -0800
mwifiex: add Tx status support for ACTION frames
ACK status (0/1) for ACTION frames is informed to cfg80211. We
will extend existing logic used for EAPOL frames. The cfg80211
API is different here. Also, we need to explicitly free cloned
skb.
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 808bbebcc8fcbcb2b93aefd8b181a0fdccb407c6
Author: Amitkumar Karwar <akarwar@marvell.com>
Date: Tue Nov 25 06:43:05 2014 -0800
mwifiex: add Tx status support for EAPOL packets
Firmware notifies the driver through event if EAPOL data packet
has been acked or not. We will inform this status to userspace
listening on a socket.
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 381e9fffe6b8343c2479939178ef7ded50bf32d3
Author: Amitkumar Karwar <akarwar@marvell.com>
Date: Tue Nov 25 06:43:04 2014 -0800
mwifiex: skip delay main work logic for USB interface.
We had introduced delay main work logic to avoid processing
interrupts when Rx pending packet count reaches high threshold.
interrupt processing is restarted later when packet count
reduces lower threashold. This helped to reduce unnecessary
overhead and improve throughput for SD and PCIe chipsets.
As there are no interrupts for USB, we will skip this logic for
USB chipsets.
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 798ea8eec16d33e0553b6be7175a23e8ddf60eee
Author: Amitkumar Karwar <akarwar@marvell.com>
Date: Tue Nov 25 06:43:03 2014 -0800
mwifiex: fix scan problem on big endian platforms
This patch adds missing endian conversion for beacon size while
processing scan response.
Reported-by: Daniel Mosquera <daniel.mosquera@ctag.com>
Tested-by: Daniel Mosquera <daniel.mosquera@ctag.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 51974611154038f1aaf6ce843bdc6445d5684ee3
Author: Amitkumar Karwar <akarwar@marvell.com>
Date: Tue Nov 25 06:43:02 2014 -0800
mwifiex: fix sparse warning
This patch fixes following sparse warnings:
drivers/net/wireless/mwifiex/util.c:152:19: warning: cast from restricted __le16
drivers/net/wireless/mwifiex/util.c:152:19: warning: restricted __le16 degrades to integer
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 8b537686a116b060475d94b6f548c78289935fef
Author: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Date: Tue Nov 25 00:21:41 2014 +0100
ath9k: add TPC capability to TX descriptor path
Add TPC capability to TX descriptor path. Cap per-packet TX power according to
TX power per-rate tables. Currently TPC is supported just by AR9003 based chips
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 23f53dd3062628d2215cab810e4cfc22c29d47ee
Author: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Date: Tue Nov 25 00:21:40 2014 +0100
ath9k: add TX power per-rate tables
Add TX power per-rate tables for different MIMO modes (e.g STBC) in order to
cap the maximum TX power value per-rate in the TX descriptor path.
Cap TX power for self generated frames (ACK, RTS/CTS).
Currently TPC is supported just by AR9003 based chips
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 4f3fff148679d5850994e53c57eb798cd201c88c
Author: Arend van Spriel <arend@broadcom.com>
Date: Thu Nov 20 22:27:02 2014 +0100
brcmfmac: correct .disconnect() callback while connecting
When the driver has sent a join iovar to the firmware it waits
for the events to report result of the connection. However, the
wpa_supplicant will request a .disconnect() after a timeout. So
upon calling .disconnect() the interface state may still be
CONNECTING. Clear the CONNECTING bit as well.
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 3fedeab10b3bb09744a6467fe7cd157f055137c3
Author: Hariprasad Shenai <hariprasad@chelsio.com>
Date: Tue Nov 25 08:33:58 2014 +0530
cxgb4/cxgb4vf/csiostor: Add T4/T5 PCI ID Table
Add a new file t4_pci_id_tbl.h that contains T4/T5 PCI ID Table so that for all
drivers that uses T4/T5 PCI functions changes can be done in one place.
checkpatch.pl script reports following error, which if tried to fix ends up in
compilation error.
ERROR: Macros with complex values should be enclosed in parentheses
+#define CH_PCI_DEVICE_ID_TABLE_DEFINE_END \
+ { 0, } \
+ }
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
new file mode 100644
ERROR: Macros with complex values should be enclosed in parentheses
+#define CH_PCI_ID_TABLE_FENTRY(devid) \
+ CH_PCI_ID_TABLE_ENTRY((devid) | \
+ ((CH_PCI_DEVICE_ID_FUNCTION) << 8)), \
+ CH_PCI_ID_TABLE_ENTRY((devid) | \
+ ((CH_PCI_DEVICE_ID_FUNCTION2) << 8))
ERROR: Macros with complex values should be enclosed in parentheses
+#define CH_PCI_DEVICE_ID_TABLE_DEFINE_END { 0, } }
ERROR: Macros with complex values should be enclosed in parentheses
+#define CH_PCI_DEVICE_ID_TABLE_DEFINE_END { 0, } }
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 138a7f49270fde7547afe976a01cef2b9fbf3a0e
Author: Andrew Lutomirski <luto@amacapital.net>
Date: Mon Nov 24 12:02:29 2014 -0800
net-timestamp: Fix a documentation typo
SOF_TIMESTAMPING_OPT_ID puts the id in ee_data, not ee_info.
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit c2d00875c151087c41e23a5afd6bd807019c9a53
Author: Dmitry Monakhov <dmonakhov@openvz.org>
Date: Tue Nov 25 13:18:39 2014 -0500
ext4: fix potential use after free during resize
We need some sort of synchronization while updating ->s_group_desc
because there are a lot of users which can access old ->s_group_desc
array after it was released. It is reasonable to use lightweight
seqcount_t here instead of RCU.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
commit d6d12b85f7daa15a02cabfc9026225b6e16d9aad
Author: Dmitry Monakhov <dmonakhov@openvz.org>
Date: Tue Nov 25 13:08:04 2014 -0500
ext4: cleanup GFP flags inside resize path
We must use GFP_NOFS instead GFP_KERNEL inside ext4_mb_add_groupinfo
and ext4_calculate_overhead() because they are called from inside a
journal transaction. Call trace:
ioctl
->ext4_group_add
->journal_start
->ext4_setup_new_descs
->ext4_mb_add_groupinfo -> GFP_KERNEL
->ext4_flex_group_add
->ext4_update_super
->ext4_calculate_overhead -> GFP_KERNEL
->journal_stop
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
commit 2193dda5eec60373c7a061c129c6ab9d658f78e9
Author: Alan Stern <stern@rowland.harvard.edu>
Date: Tue Nov 25 12:28:46 2014 +0100
USB: host: Remove ehci-octeon and ohci-octeon drivers
Remove special-purpose octeon drivers and instead use ehci-platform
and ohci-platform as suggested with
http://marc.info/?l=linux-mips&m=140139694721623&w=2
[andreas.herrmann:
fixed compile error]
Cc: David Daney <david.daney@cavium.com>
Cc: Alex Smith <alex.smith@imgtec.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f83b050b3c223278c4299d8736ffdafceb2c6c7c
Author: Jan Kara <jack@suse.cz>
Date: Tue Nov 25 11:55:24 2014 -0500
ext4: introduce aging to extent status tree
Introduce a simple aging to extent status tree. Each extent has a
REFERENCED bit which gets set when the extent is used. Shrinker then
skips entries with referenced bit set and clears the bit. Thus
frequently used extents have higher chances of staying in memory.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
commit ee4bb47d2bc8149b11e4d1dc2378730cb166d5a8
Author: Jan Kara <jack@suse.cz>
Date: Tue Nov 25 11:53:47 2014 -0500
ext4: cleanup flag definitions for extent status tree
Currently flags for extent status tree are defined twice, once shifted
and once without a being shifted. Consolidate these definitions into one
place and make some computations automatic to make adding flags less
error prone. Compiler should be clever enough to figure out these are
constants and generate the same code.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
commit 9915b75359e3cc99a4dd3b39f83f394395f8f1aa
Author: Jan Kara <jack@suse.cz>
Date: Tue Nov 25 11:51:23 2014 -0500
ext4: limit number of scanned extents in status tree shrinker
Currently we scan extent status trees of inodes until we reclaim nr_to_scan
extents. This can however require a lot of scanning when there are lots
of delayed extents (as those cannot be reclaimed).
Change shrinker to work as shrinkers are supposed to and *scan* only
nr_to_scan extents regardless of how many extents did we actually
reclaim. We however need to be careful and avoid scanning each status
tree from the beginning - that could lead to a situation where we would
not be able to reclaim anything at all when first nr_to_scan extents in
the tree are always unreclaimable. We remember with each inode offset
where we stopped scanning and continue from there when we next come
across the inode.
Note that we also need to update places calling __es_shrink() manually
to pass reasonable nr_to_scan to have a chance of reclaiming anything and
not just 1.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
commit 149f510220f5df2e3eada0dfc8a0b18208ffaf65
Author: Jan Kara <jack@suse.cz>
Date: Tue Nov 25 11:49:25 2014 -0500
ext4: move handling of list of shrinkable inodes into extent status code
Currently callers adding extents to extent status tree were responsible
for adding the inode to the list of inodes with freeable extents. This
is error prone and puts list handling in unnecessarily many places.
Just add inode to the list automatically when the first non-delay extent
is added to the tree and remove inode from the list when the last
non-delay extent is removed.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
commit aaf3ce623d42e534492c19e3b314c800e8d97b84
Author: Zheng Liu <wenqing.lz@taobao.com>
Date: Tue Nov 25 11:47:01 2014 -0500
ext4: change LRU to round-robin in extent status tree shrinker
In this commit we discard the lru algorithm for inodes with extent
status tree because it takes significant effort to maintain a lru list
in extent status tree shrinker and the shrinker can take a long time to
scan this lru list in order to reclaim some objects.
We replace the lru ordering with a simple round-robin. After that we
never need to keep a lru list. That means that the list needn't be
sorted if the shrinker can not reclaim any objects in the first round.
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
commit 036d4c3764f230f39fba5b2574a6c29b00a48bf9
Author: Zheng Liu <wenqing.lz@taobao.com>
Date: Tue Nov 25 11:44:37 2014 -0500
ext4: cache extent hole in extent status tree for ext4_da_map_blocks()
Currently extent status tree doesn't cache extent hole when a write
looks up in extent tree to make sure whether a block has been allocated
or not. In this case, we don't put extent hole in extent cache because
later this extent might be removed and a new delayed extent might be
added back. But it will cause a defect when we do a lot of writes. If
we don't put extent hole in extent cache, the following writes also need
to access extent tree to look at whether or not a block has been
allocated. It brings a cache miss. This commit fixes this defect.
Also if the inode doesn't have any extent, this extent hole will be
cached as well.
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
commit f3c08e9bdc8b51aa941aed2fedb4ab468ce7588e
Author: Jan Kara <jack@suse.cz>
Date: Tue Nov 25 11:41:49 2014 -0500
ext4: fix block reservation for bigalloc filesystems
For bigalloc filesystems we have to check whether newly requested inode
block isn't already part of a cluster for which we already have delayed
allocation reservation. This check happens in ext4_ext_map_blocks() and
that function sets EXT4_MAP_FROM_CLUSTER if that's the case. However if
ext4_da_map_blocks() finds in extent cache information about the block,
we don't call into ext4_ext_map_blocks() and thus we always end up
getting new reservation even if the space for cluster is already
reserved. This results in overreservation and premature ENOSPC reports.
Fix the problem by checking for existing cluster reservation already in
ext4_da_map_blocks(). That simplifies the logic and actually allows us
to get rid of the EXT4_MAP_FROM_CLUSTER flag completely.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
commit 439b8bddaa1ebed9f9f8fb2f6f33f5e639d76ab8
Author: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com>
Date: Fri Nov 21 18:29:07 2014 +0300
mfd: da9063: Get irq base dynamically before registering device
After registering mfd device with proper irq_base
platform_get_irq_byname() calls will return VIRQ instead of local IRQ.
This fixes da9063 rtc registration issue:
da9063-rtc da9063-rtc: Failed to request ALARM IRQ 1: -22
Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 2c20f6de95afef89127163d16c88cd0456c48077
Author: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Date: Wed Nov 12 16:28:02 2014 +0100
mfd: max14577: Fix obvious typo in company name in copyright
Fix a typo in name of company in copyright comment.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 0e50e92669357e4702fcd6a85e2f0d6e92295664
Author: Lee Jones <lee.jones@linaro.org>
Date: Tue Nov 11 12:36:46 2014 +0000
mfd: axp20x: Constify axp20x_acpi_match and rid unused warning
axp20x.c:239:30:
warning: ‘axp20x_acpi_match’ defined but not used [-Wunused-variable]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 71d679b84ce8ca3207e547488f70c259575d2f2f
Author: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Date: Mon Nov 17 18:07:42 2014 +0300
mfd: t7l66xb: prepare/unprepare clocks
Change clk_enable/disable() calls to clk_prepare_enable() and
clk_disable_unprepare().
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
commit 7263bd39251e6926ca7fa5591679b26577fdaccb
Author: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Date: Mon Nov 17 18:07:43 2014 +0300
mfd: tc6387xb: prepare/unprepare clocks
Change clk_enable/disable() calls to clk_prepare_enable() and
clk_disable_unprepare().
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
commit 21cf3318d675b6ceeb5a3ed82ffe467a2b6eaee4
Author: Laurentiu Palcu <laurentiu.palcu@intel.com>
Date: Fri Nov 7 14:45:14 2014 +0200
mfd: dln2: add support for USB-SPI module
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
commit 783f6fc4cecd770dfdb1418c7c890dbeb3bf3c91
Author: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Date: Tue Nov 4 13:04:07 2014 +0000
mfd: wm5110: Add missing registers for AIF2 channels 3-6
When the extra 4 channels were added to AIF2 the necessary frame control
registers were not given defaults and marked readable. This patch fixes
this.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
commit 90f2d0f7bf069b1a2798156b7dcc8e7d1e874406
Author: Linus Walleij <linus.walleij@linaro.org>
Date: Tue Oct 28 11:06:56 2014 +0100
mfd: tc3589x: get rid of static base
The TC3589x driver is now a device tree-only driver, so we want
only dynamic IRQs and GPIO numbers from the tc3589x, no static
assignments.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
commit 47958c5ab4035bd91f05598f76a61cd9f7f2934c
Author: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Date: Tue Nov 4 15:24:36 2014 +0000
mfd: arizona: Document HP_CTRL_1L and HP_CTRL_1R registers
These registers are documented in the datasheet and used as part of the
extcon driver. Expose them properly through regmap as the datasheet
notes they should be treated as volatile do so.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
commit e62cace7b602b29cc9226e64dfb2c47ddfb9558e
Author: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Date: Tue Nov 4 15:26:22 2014 +0000
mfd: wm8997: Mark INTERRUPT_STATUS_2_MASK as readable
Technically this register is not used on wm8997 however the regmap core
requires a continuous block of IRQs. The simplest solution is just to
add the register.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
commit a64ab6b4cd098f6c2ea959fe9bf1fd3f8b13b1f3
Author: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Date: Thu Nov 6 11:52:38 2014 +0300
mfd: tc6393xb: Prepare/unprepare clocks
Change clk_enable/disable() calls to clk_prepare_enable() and
clk_disable_unrepapre().
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 12849b63a4e9e22fb63d0fc967726e8cdf2a19c2
Author: Lee Jones <lee.jones@linaro.org>
Date: Mon Nov 10 12:28:36 2014 +0000
mfd: tps65090: Fix bonkers indenting strategy
First spotted pointless (incorrect) indent of 'if (ret)', then double
indentations of a struct attribute 'mask'. Decided to go through the
whole file and make amendments instead and this is the result.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 1a5fb99de4850cba710d91becfa2c65653048589
Author: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Date: Fri Oct 24 21:19:57 2014 +0400
mfd: tc6393xb: Fail ohci suspend if full state restore is required
Some boards with TC6393XB chip require full state restore during system
resume thanks to chip's VCC being cut off during suspend (Sharp SL-6000
tosa is one of them). Failing to do so would result in ohci Oops on
resume due to internal memory contentes being changed. Fail ohci suspend
on tc6393xb is full state restore is required.
Recommended workaround is to unbind tmio-ohci driver before suspend and
rebind it after resume.
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit bde3e706a63d5c258b3e4f5e327bcf032fb1adfe
Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Mon Nov 3 19:29:23 2014 +0200
mfd: lpc_sch: Don't call mfd_remove_devices()
MFD core already cares about failing registration. It will remove successfully
registered devices in case of error. Thus, no need to repeatedly call
mfd_remove_devices().
Fixes: 5829e9b64e65 (mfd: lpc_sch: Accomodate partial population of the MFD devices)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 1753b40f5c97e0d0bf2f0a562603cfc592945a5e
Author: Joe Perches <joe@perches.com>
Date: Sun Oct 26 22:25:02 2014 -0700
mfd: wm8350-core: Fix probable mask then right shift defect
Precedence of & and >> is not the same and is not left to right.
shift has higher precedence and should be done after the mask.
Add parentheses around the mask.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 7d082baa349e59ce3de6452abc05e5de6436aad4
Author: Guenter Roeck <linux@roeck-us.net>
Date: Thu Oct 9 09:18:38 2014 -0700
mfd: ab8500-sysctrl: Drop ab8500_restart
ab8500_restart is not called from anywhere in the kernel, so drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 6bdf891a17148a1b91beb603b09c599dc98eb4fb
Author: Lee Jones <lee.jones@linaro.org>
Date: Mon Nov 3 16:12:26 2014 +0000
mfd: db8500-prcmu: Provide sane error path values
Also rid superfluous gotos and label.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 51a7e02bb629498c32915881ed4fb61ef778282a
Author: Pramod Gurav <pramod.gurav@smartplayin.com>
Date: Thu Oct 30 14:51:35 2014 +0530
mfd: db8500-prcmu: Check return of devm_ioremap for error
Error check around return value of devm_ioremap is missing. Add the same
to avoid NULL pointer dereference.
Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 1b9b46d05f887aec418b3a5f4f55abf79316fcda
Author: Tony Lindgren <tony@atomide.com>
Date: Sun Nov 2 10:09:38 2014 -0800
mfd: twl4030-power: Fix regression with missing compatible flag
Commit e7cd1d1eb16f ("mfd: twl4030-power: Add generic reset
configuration") accidentally removed the compatible flag for
"ti,twl4030-power" that should be there as documented in the
binding.
If "ti,twl4030-power" only the poweroff configuration is done
by the driver.
Fixes: e7cd1d1eb16f ("mfd: twl4030-power: Add generic reset configuration")
Cc: stable@vger.kernel.org # v3.16+
Reported-by: "Dr. H. Nikolaus Schaller" <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 5cb5d9616a47d5383a85379afa4429382ef46b38
Author: Micky Ching <micky_ching@realsil.com.cn>
Date: Fri Oct 10 13:58:44 2014 +0800
mfd: rtsx: Fix PM suspend for 5227 & 5249
Fix rts5227&5249 failed send buffer cmd after suspend,
PM_CTRL3 should reset before send any buffer cmd after suspend.
Otherwise, buffer cmd will failed, this will lead resume fail.
Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 130dd5b039dcbab7bcb2fdce0bb3cc7347b08b29
Author: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Date: Tue Oct 21 13:23:16 2014 +0200
mfd/regulator: dt-bindings: max77686: Document regulators off in suspend
Add information which regulators can be disabled during system suspend.
Suggested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 6ce286f182e22837a02a368eeb49a0057b2cd5f9
Author: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Date: Mon Oct 20 23:05:50 2014 +0200
Revert "mfd: sec-core: Prepare regulators for suspend state to reduce power-consumption"
This reverts commit b7cde7078d2344073c310aa65fc2b0a845d2cb5b
("mfd: sec-core: Prepare regulators for suspend state to reduce power-consumption")
Commit b7cde7078d23 called regulator_suspend_prepare() to prepare the
regulators for a suspend state. But it did from the device pm suspend
handler while the regulator suspend prepare function iterates over all
regulators and not only the one managed by this device so it doesn't
seems to be correct to call it from within a device driver.
It is better to call the regulator suspend prepare/finish functions
from platform code instead so this patch reverts the mentioned commit.
Suggested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit efa3ca414be9b930774b5c1a3190f735596f5115
Author: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Date: Mon Oct 20 14:34:46 2014 +0200
mfd: max77693: Map charger device to its own of_node
Add a "maxim,max77693-charger" of_compatible to the mfd_cell so the MFD
child device (the charger) will have its own of_node set. This will be
used by the max77693 charger driver in next patches to obtain battery
configuration from DTS.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 6f467e5f0cdc3c0304bfcabcbaf56970ddea3d52
Author: Will Sheppard <wsheppard@embedded-bits.co.uk>
Date: Wed Oct 15 09:38:47 2014 +0100
mfd: arizona-spi: Add lines after declarations - checkpatch catch
This was found whilst running checkpatch.pl on arizona-spi.
WARNING: Missing a blank line after declarations
+ struct arizona *arizona = spi_get_drvdata(spi);
+ arizona_dev_exit(arizona);
Signed-off-by: Will Sheppard <wsheppard@embedded-bits.co.uk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 6cbac55368324ec2a0e59e192c5b596d0f4569f7
Author: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Date: Fri Oct 10 10:23:53 2014 +0200
mfd: max77693: Remove unused define
Remove old MAX77693_NUM_IRQ_MUIC_REGS define. Not used anywhere.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 590b7795b3dc293a36136a4321ba59da60e5853c
Author: Boris Brezillon <boris.brezillon@free-electrons.com>
Date: Mon Oct 6 15:48:44 2014 +0200
mfd: Add documentation for atmel-hlcdc DT bindings
The HLCDC IP available on some Atmel SoCs (i.e. at91sam9n12, at91sam9x5
family or sama5d3 family) exposes 2 subdevices:
- a display controller (controlled by a DRM driver)
- a PWM chip
This patch adds documentation for atmel-hlcdc DT bindings.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Anthony Harivel <anthony.harivel@emtrion.de>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 2c86e9fb7263dbca2c21a086090d32ba90129f7b
Author: Boris Brezillon <boris.brezillon@free-electrons.com>
Date: Mon Oct 6 15:48:43 2014 +0200
mfd: Add atmel-hlcdc driver
The HLCDC IP available on some Atmel SoCs (i.e. at91sam9n12, at91sam9x5
family or sama5d3 family) exposes 2 subdevices:
- a display controller (controlled by a DRM driver)
- a PWM chip
The MFD device provides a regmap and several clocks (those connected
to this hardware block) to its subdevices.
This way concurrent accesses to the iomem range are handled by the regmap
framework, and each subdevice can safely access HLCDC registers.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Anthony Harivel <anthony.harivel@emtrion.de>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 6e3f62f0793ebff3f91076490ff0fbb107939701
Author: Johan Hovold <johan@kernel.org>
Date: Fri Sep 26 12:55:33 2014 +0200
mfd: core: Fix platform-device id generation
Make sure to always honour multi-function devices registered with
PLATFORM_DEVID_NONE (-1) or PLATFORM_DEVID_AUTO (-2) as id base. In this
case it does not make sense to append the cell id to the mfd-id base and
potentially change the requested behaviour.
Specifically this will allow multi-function devices to be registered
with PLATFORM_DEVID_AUTO while still having non-zero cell ids.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 16b5fe2966b8dc4a474d6618d382d26933d90b24
Author: Johan Hovold <johan@kernel.org>
Date: Fri Sep 26 12:55:32 2014 +0200
HID: hid-sensor-hub: Use mfd_add_hotplug_devices() helper
Use mfd_add_hotplug_devices() helper to register the subdevices.
Compile-only tested.
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 1ab589c72ef66f5f281d658ab606e02d661031d8
Author: Johan Hovold <johan@kernel.org>
Date: Fri Sep 26 12:55:31 2014 +0200
mfd: Use mfd_add_hotplug_devices() helper
Use mfd_add_hotplug_devices helper to register the subdevices.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit bdb0066df96e74a4002125467ebe459feff1ebef
Author: Pankaj Dubey <pankaj.dubey@samsung.com>
Date: Tue Sep 30 14:05:27 2014 +0530
mfd: syscon: Decouple syscon interface from platform devices
Currently a syscon entity can be only registered directly through a
platform device that binds to a dedicated syscon driver. However in
certain use cases it is desirable to make a device used with another
driver a syscon interface provider.
For example, certain SoCs (e.g. Exynos) contain system controller
blocks which perform various functions such as power domain control,
CPU power management, low power mode control, but in addition contain
certain IP integration glue, such as various signal masks,
coprocessor power control, etc. In such case, there is a need to have
a dedicated driver for such system controller but also share registers
with other drivers. The latter is where the syscon interface is helpful.
In case of DT based platforms, this patch decouples syscon object from
syscon platform driver, and allows to create syscon objects first time
when it is required by calling of syscon_regmap_lookup_by APIs and keep
a list of such syscon objects along with syscon provider device_nodes
and regmap handles.
For non-DT based platforms, this patch keeps syscon platform driver
structure so that syscon can be probed and such non-DT based drivers
can use syscon_regmap_lookup_by_pdev API and access regmap handles.
Once all users of "syscon_regmap_lookup_by_pdev" migrated to DT based,
we can completely remove platform driver of syscon, and keep only helper
functions to get regmap handles.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Tomasz Figa <tomasz.figa@gmail.com>
Tested-by: Vivek Gautam <gautam.vivek@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit ee828d02611f325a70ef6a3c1fd2dd1eb3bc9704
Author: Jaewon Kim <jaewon02.kim@samsung.com>
Date: Thu Sep 18 01:40:26 2014 +0900
mfd: max77693: Update DT binding to support haptic
This patch add haptic DT binding documentation and example
to support haptic driver in max77693 Multifunction device.
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit d1bafd78fce5f07bfc9c2c8a77146f74528a469e
Author: Jaewon Kim <jaewon02.kim@samsung.com>
Date: Thu Sep 18 01:40:25 2014 +0900
mfd: max77693: Add haptic of_compatible in mfd_cell
This patch add haptic of_compatible in order to use the haptic
device driver using Devicetree.
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit efbf49224acc8ba5ac4d7ac93b5035836aebf400
Author: Jaewon Kim <jaewon02.kim@samsung.com>
Date: Thu Sep 18 01:40:24 2014 +0900
mfd: max77693: Initialize haptic register map
This patch add regmap_haptic initialization to use haptic register map
in haptic device driver.
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 11d0d30093301169833aedfc130d9e4abe621be1
Author: Johannes Pointner <johannes.pointner@gmail.com>
Date: Thu Sep 25 08:31:42 2014 +0200
mfd: tps65217: Add compatible string for subdevices
Adds of_compatible strings to mfd_cells for sub devices of the tps65217.
Signed-off-by: Johannes Pointner <johannes.pointner@br-automation.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 65fa5f773196ccc88c4aae43ece9119f092c20a6
Author: Damien Lespiau <damien.lespiau@intel.com>
Date: Tue Nov 25 13:45:41 2014 +0000
drm/i915: Fix short description of intel_display_power_is_enabled()
That's the version actually taking the dev_priv->power_domains lock.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit 07c802bd7c3951410b105356787d655e273ab537
Author: Will Deacon <will.deacon@arm.com>
Date: Tue Nov 25 15:26:13 2014 +0000
arm64: vmlinux.lds.S: don't discard .exit.* sections at link-time
.exit.* sections may be subject to patching by the new alternatives
framework and so shouldn't be discarded at link-time. Without this patch,
such a section will result in the following linker error:
`.exit.text' referenced in section `.altinstructions' of
drivers/built-in.o: defined in discarded section `.exit.text' of
drivers/built-in.o
Signed-off-by: Will Deacon <will.deacon@arm.com>
commit af86e5974d3069bd26ebcf7c046c6e59726acaaa
Author: Laura Abbott <lauraa@codeaurora.org>
Date: Fri Nov 21 21:50:42 2014 +0000
arm64: Factor out fixmap initialization from ioremap
The fixmap API was originally added for arm64 for
early_ioremap purposes. It can be used for other purposes too
so move the initialization from ioremap to somewhere more
generic. This makes it obvious where the fixmap is being set
up and allows for a cleaner implementation of __set_fixmap.
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
commit c3684fbb446501b48dec6677a6a9f61c215053de
Author: Laura Abbott <lauraa@codeaurora.org>
Date: Fri Nov 21 21:50:40 2014 +0000
arm64: Move cpu_resume into the text section
The function cpu_resume currently lives in the .data section.
There's no reason for it to be there since we can use relative
instructions without a problem. Move a few cpu_resume data
structures out of the assembly file so the .data annotation
can be dropped completely and cpu_resume ends up in the read
only text section.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Kees Cook <keescook@chromium.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
commit ac2dec5f6c27a581f8571da605d9ba04df18330d
Author: Laura Abbott <lauraa@codeaurora.org>
Date: Fri Nov 21 21:50:39 2014 +0000
arm64: Switch to adrp for loading the stub vectors
The hyp stub vectors are currently loaded using adr. This
instruction has a +/- 1MB range for the loading address. If
the alignment for sections is changed the address may be more
than 1MB away, resulting in reclocation errors. Switch to using
adrp for getting the address to ensure we aren't affected by the
location of the __hyp_stub_vectors.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
commit fcff588633e848aa728a4437ef96d437299ba03d
Author: Laura Abbott <lauraa@codeaurora.org>
Date: Fri Nov 21 21:50:38 2014 +0000
arm64: Treat handle_arch_irq as a function pointer
handle_arch_irq isn't actually text, it's just a function pointer.
It doesn't need to be stored in the text section and doing so
causes problesm if we ever want to make the kernel text read only.
Declare handle_arch_irq as a proper function pointer stored in
the data section.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
commit 3eebdbe5fc7d64c7a6ef14cc5b8be518ffd563fa
Author: Mark Rutland <mark.rutland@arm.com>
Date: Tue Nov 25 13:27:43 2014 +0000
arm64: sanity checks: add ID_AA64DFR{0,1}_EL1
While we currently expect self-hosted debug support to be identical
across CPUs, we don't currently sanity check this.
This patch adds logging of the ID_AA64DFR{0,1}_EL1 values and associated
sanity checking code.
It's not clear to me whether we need to check PMUVer, TraceVer, and
DebugVer, as we don't currently rely on these fields at all.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
commit efdf4211d5b103535ae22972acadf57c9fc38b30
Author: Mark Rutland <mark.rutland@arm.com>
Date: Tue Nov 25 13:27:42 2014 +0000
arm64: sanity checks: add missing newline to print
A missing newline in the WARN_TAINT_ONCE string results in ugly and
somewhat difficult to read output in the case of a sanity check failure,
as the next print does not appear on a new line:
Unsupported CPU feature variation.Modules linked in:
This patch adds the missing newline, fixing the output formatting.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
commit 9760270c36a4d2ac640ea6294f4f8634a8b27121
Author: Mark Rutland <mark.rutland@arm.com>
Date: Tue Nov 25 13:27:41 2014 +0000
arm64: sanity checks: ignore ID_MMFR0.AuxReg
It seems that Cortex-A53 r0p4 added support for AIFSR and ADFSR, and
ID_MMFR0.AuxReg has been updated accordingly to report this fact. As
Cortex-A53 could be paired with CPUs which do not implement these
registers (e.g. all current revisions of Cortex-A57), this may trigger a
sanity check failure at boot.
The AuxReg value describes the availability of the ACTLR, AIFSR, and
ADFSR registers, which are only of use to 32-bit guest OSs, and have
IMPLEMENTATION DEFINED contents. Given the nature of these registers it
is likely that KVM will need to trap accesses regardless of whether the
CPUs are heterogeneous.
This patch masks out the ID_MMFR0.AuxReg value from the sanity checks,
preventing spurious warnings at boot time.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Andre Przywara <andre.przywara@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
commit 1cefdaea613bcd247b2235079fcbb0ca4687542d
Author: Mark Brown <broonie@linaro.org>
Date: Fri Nov 21 00:36:49 2014 +0000
arm64: topology: Fix handling of multi-level cluster MPIDR-based detection
The only requirement the scheduler has on cluster IDs is that they must
be unique. When enumerating the topology based on MPIDR information the
kernel currently generates cluster IDs by using the first level of
affinity above the core ID (either level one or two depending on if the
core has multiple threads) however the ARMv8 architecture allows for up
to three levels of affinity. This means that an ARMv8 system may
contain cores which have MPIDRs identical other than affinity level
three which with current code will cause us to report multiple cores
with the same identification to the scheduler in violation of its
uniqueness requirement.
Ensure that we do not violate the scheduler requirements on systems that
uses all the affinity levels by incorporating both affinity levels two
and three into the cluser ID when the cores are not threaded.
While no currently known hardware uses multi-level clusters it is better
to program defensively, this will help ease bringup of systems that have
them and will ensure that things like distribution install media do not
need to be respun to replace kernels in order to deploy such systems.
In the worst case the system will work but perform suboptimally until a
kernel modified to handle the new topology better is installed, in the
best case this will be an adequate description of such topologies for
the scheduler to perform well.
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
commit c0a01b84b1fdbd98bff5bca5b201fe73fda7e9d9
Author: Andre Przywara <andre.przywara@arm.com>
Date: Fri Nov 14 15:54:12 2014 +0000
arm64: protect alternatives workarounds with Kconfig options
Not all of the errata we have workarounds for apply necessarily to all
SoCs, so people compiling a kernel for one very specific SoC may not
need to patch the kernel.
Introduce a new submenu in the "Platform selection" menu to allow
people to turn off certain bugs if they are not affected. By default
all of them are enabled.
Normal users or distribution kernels shouldn't bother to deselect any
bugs here, since the alternatives framework will take care of
patching them in only if needed.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
[will: moved kconfig menu under `Kernel Features']
Signed-off-by: Will Deacon <will.deacon@arm.com>
commit 5afaa1fc1b320cec48affa7e6949f2493f875c12
Author: Andre Przywara <andre.przywara@arm.com>
Date: Fri Nov 14 15:54:11 2014 +0000
arm64: add Cortex-A57 erratum 832075 workaround
The ARM erratum 832075 applies to certain revisions of Cortex-A57,
one of the workarounds is to change device loads into using
load-aquire semantics.
This is achieved using the alternatives framework.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
commit 301bcfac42897dbd1b0b3c1be49f24654a1bc49e
Author: Andre Przywara <andre.przywara@arm.com>
Date: Fri Nov 14 15:54:10 2014 +0000
arm64: add Cortex-A53 cache errata workaround
The ARM errata 819472, 826319, 827319 and 824069 define the same
workaround for these hardware issues in certain Cortex-A53 parts.
Use the new alternatives framework and the CPU MIDR detection to
patch "cache clean" into "cache clean and invalidate" instructions if
an affected CPU is detected at runtime.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
[will: add __maybe_unused to squash gcc warning]
Signed-off-by: Will Deacon <will.deacon@arm.com>
commit 159a5e920446aed12fe373ecc3c7b3dc667091ae
Author: Chanwoo Choi <cw00.choi@samsung.com>
Date: Tue Nov 18 17:59:43 2014 +0900
mfd: s2mps11: Add binding documentation for Samsung S2MPS13 PMIC
This patch adds the binding documentation for Samsung S2MPS13 PMIC
which is similiar with existing S2MPS14 PMIC. S2MPS13 has the different number
of regulators from S2MPS14 and RTC/Clock is the same with the S2MPS14.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit f928b53d749bac4514c2ed1ea4d553fa581578b5
Author: Chanwoo Choi <cw00.choi@samsung.com>
Date: Tue Nov 18 17:59:41 2014 +0900
clk: s2mps11: Add the support for S2MPS13 PMIC clock
This patch adds the support for S2MPS13 PMIC clock which is same with existing
S2MPS14 RTC IP. But, S2MPS13 uses all of clocks (32khz_{ap|bt|cp}).
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Michael Turquette <mturquette@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 76b9840b24ae049b39f1b3cf0e49f21b7c41748f
Author: Chanwoo Choi <cw00.choi@samsung.com>
Date: Tue Nov 18 17:59:40 2014 +0900
regulator: s2mps11: Add support S2MPS13 regulator device
This patch adds S2MPS13 regulator device to existing S2MPS11 device driver.
The S2MPS13 has just different number of regulators from S2MPS14.
The S2MPS13 regulator device includes LDO[1-40] and BUCK[1-10].
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 3bc2ee91a470c52fb3979c23c12d43283455f10d
Author: Chanwoo Choi <cw00.choi@samsung.com>
Date: Tue Nov 18 17:59:39 2014 +0900
mfd: sec-core: Add support for S2MPS13 device
This patch adds the support for Samsung S2MPS13 PMIC device to the sec-core MFD
driver. The S2MPS13 is very similar with existing S2MPS14 and includes PMIC/
RTC/CLOCK devices.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit ce79d54ae447d65117303ca9f61ffe9dcbc2465d
Author: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Date: Tue Oct 28 22:36:05 2014 +0200
spi/of: Add OF notifier handler
Add OF notifier handler needed for creating/destroying spi devices
according to dynamic runtime changes in the DT live tree. This code is
enabled when CONFIG_OF_DYNAMIC is selected.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Cc: <linux-spi@vger.kernel.org>
commit aff5e3f89a0b07e7edf9243f913378cc27e4110d
Author: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Date: Wed Oct 29 10:40:37 2014 +0200
spi/of: Create new device registration method and accessors
Dynamically inserting spi device nodes requires the use of a single
device registration method. Refactor the existing
of_register_spi_devices() to split out the core functionality for a
single device into a separate function; of_register_spi_device(). This
function will be used by the OF_DYNAMIC overlay code to make live
modifications to the tree.
Methods to lookup a device/master using a device node are added
as well, of_find_spi_master_by_node() & of_find_spi_device_by_node().
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
[grant.likely] Split patch into two pieces for clarity
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Cc: <linux-spi@vger.kernel.org>
commit ea7513bbc04170f1cbf42953187a4d8b731c71c4
Author: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Date: Tue Oct 28 22:36:03 2014 +0200
i2c/of: Add OF_RECONFIG notifier handler
CONFIG_OF_DYNAMIC enables runtime changes to the device tree which in
turn may trigger addition or removal of devices from Linux. Add an
OF_RECONFIG notifier handler to receive tree change events and to
creating or destroy i2c devices as required.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
[grant.likely: clean up #ifdefs and drop unneeded error handling]
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-i2c@vger.kernel.org
commit a430a3455f2c48995e06b359a82a1109a419e9ef
Author: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Date: Tue Oct 28 22:36:02 2014 +0200
i2c/of: Factor out Devicetree registration code
Dynamically inserting i2c client device nodes requires the use
of a single device registration method. Factor out the loop body of
of_i2c_register_devices() so that it can be called for individual
device_nodes instead of for all the children of a node.
Note: The diff of this commit looks far more complicated than it
actually is due the indentation being changed for a large block of code.
When viewed using the diff -w flag to ignore whitespace changes it can
be seen that the change is actually quite simple.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
[grant.likely: Made new function static and removed changes to header]
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-i2c@vger.kernel.org
commit ebf3992061db1f7b3aa093f37fb308acc74fbc82
Author: Tony Lindgren <tony@atomide.com>
Date: Mon Nov 24 11:05:06 2014 -0800
usb: musb: Use IS_ENABLED for tusb6010
This removes the ifdef clutter a bit and saves few lines.
It also makes it easier to detect the remaining places
where we have conditional building of code done based
on if defined for things like DMA.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
commit 82c02f58ba3a1ee0a067c0f90513e826d6152ba6
Author: Tony Lindgren <tony@atomide.com>
Date: Mon Nov 24 11:05:05 2014 -0800
usb: musb: Allow multiple glue layers to be built in
There's no reason any longer to keep it as a choice now that
the IO access has been fixed.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
commit 8a77f05aa39be879535f22a9757e703581fa1392
Author: Tony Lindgren <tony@atomide.com>
Date: Mon Nov 24 11:05:04 2014 -0800
usb: musb: Pass fifo_mode in platform data
This allows setting the correct fifo_mode when multiple
MUSB glue layers are built-in.
Cc: Fabio Baltieri <fabio.baltieri@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Apelete Seketeli <apelete@seketeli.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
commit d026e9c76aac3632af174cf02d5c94defa5e6026
Author: Tony Lindgren <tony@atomide.com>
Date: Mon Nov 24 11:05:03 2014 -0800
usb: musb: Change end point selection to use new IO access
This allows the endpoints to work when multiple MUSB glue
layers are built in.
Cc: Fabio Baltieri <fabio.baltieri@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Apelete Seketeli <apelete@seketeli.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
commit 1b40fc57a517878cf4c2e16ce29cc9a066dc1064
Author: Tony Lindgren <tony@atomide.com>
Date: Mon Nov 24 11:05:02 2014 -0800
usb: musb: Change to use new IO access
Change to use new IO access. This allows us to build in multiple
…
heftig
referenced
this pull request
in zen-kernel/zen-kernel
Dec 7, 2014
…robe commit b5b2ffc upstream. While working on a different issue, I noticed an annoying use after free bug on my machine when unloading the ixgbe driver: [ 8642.318797] ixgbe 0000:02:00.1: removed PHC on p2p2 [ 8642.742716] ixgbe 0000:02:00.1: complete [ 8642.743784] BUG: unable to handle kernel paging request at ffff8807d3740a90 [ 8642.744828] IP: [<ffffffffa01c77dc>] ixgbe_remove+0xfc/0x1b0 [ixgbe] [ 8642.745886] PGD 20c6067 PUD 81c1f6067 PMD 81c15a067 PTE 80000007d3740060 [ 8642.746956] Oops: 0002 [#1] SMP DEBUG_PAGEALLOC [ 8642.748039] Modules linked in: [...] [ 8642.752929] CPU: 1 PID: 1225 Comm: rmmod Not tainted 3.18.0-rc2+ #49 [ 8642.754203] Hardware name: Supermicro X10SLM-F/X10SLM-F, BIOS 1.1b 11/01/2013 [ 8642.755505] task: ffff8807e34d3fe0 ti: ffff8807b7204000 task.ti: ffff8807b7204000 [ 8642.756831] RIP: 0010:[<ffffffffa01c77dc>] [<ffffffffa01c77dc>] ixgbe_remove+0xfc/0x1b0 [ixgbe] [...] [ 8642.774335] Stack: [ 8642.775805] ffff8807ee824098 ffff8807ee824098 ffffffffa01f3000 ffff8807ee824000 [ 8642.777326] ffff8807b7207e18 ffffffff8137720f ffff8807ee824098 ffff8807ee824098 [ 8642.778848] ffffffffa01f3068 ffff8807ee8240f8 ffff8807b7207e38 ffffffff8144180f [ 8642.780365] Call Trace: [ 8642.781869] [<ffffffff8137720f>] pci_device_remove+0x3f/0xc0 [ 8642.783395] [<ffffffff8144180f>] __device_release_driver+0x7f/0xf0 [ 8642.784876] [<ffffffff814421f8>] driver_detach+0xb8/0xc0 [ 8642.786352] [<ffffffff814414a9>] bus_remove_driver+0x59/0xe0 [ 8642.787783] [<ffffffff814429d0>] driver_unregister+0x30/0x70 [ 8642.789202] [<ffffffff81375c65>] pci_unregister_driver+0x25/0xa0 [ 8642.790657] [<ffffffffa01eb38e>] ixgbe_exit_module+0x1c/0xc8e [ixgbe] [ 8642.792064] [<ffffffff810f93a2>] SyS_delete_module+0x132/0x1c0 [ 8642.793450] [<ffffffff81012c61>] ? do_notify_resume+0x61/0xa0 [ 8642.794837] [<ffffffff816d2029>] system_call_fastpath+0x12/0x17 The issue is that test_and_set_bit() done on adapter->state is being performed *after* the netdevice has been freed via free_netdev(). When netdev is being allocated on initialization time, it allocates a private area, here struct ixgbe_adapter, that resides after the net_device structure. In ixgbe_probe(), the device init routine, we set up the adapter after alloc_etherdev_mq() on the private area and add a reference for the pci_dev as well via pci_set_drvdata(). Both in the error path of ixgbe_probe(), but also on module unload when ixgbe_remove() is being called, commit 41c6284 ("ixgbe: Fix rcu warnings induced by LER") accesses adapter after free_netdev(). The patch stores the result in a bool and thus fixes above oops on my side. Fixes: 41c6284 ("ixgbe: Fix rcu warnings induced by LER") Cc: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Imroy
pushed a commit
to Imroy/linux
that referenced
this pull request
Feb 21, 2015
Active pages should not be freed to the page allocator as it triggers a bad page state warning. Fengguang Wu reported the following bug and bisected it to the patch "mm: remove lru parameter from __lru_cache_add and lru_cache_add_lru" which is currently in mmotm as mm-remove-lru-parameter-from-__lru_cache_add-and-lru_cache_add_lru.patch [ 84.212960] BUG: Bad page state in process rm pfn:0b0c9 [ 84.214682] page:ffff88000d646240 count:0 mapcount:0 mapping: (null) index:0x0 [ 84.216883] page flags: 0x20000000004c(referenced|uptodate|active) [ 84.218697] CPU: 1 PID: 283 Comm: rm Not tainted 3.10.0-rc4-04361-geeb9bfc torvalds#49 [ 84.220729] ffff88000d646240 ffff88000d179bb8 ffffffff82562956 ffff88000d179bd8 [ 84.223242] ffffffff811333f1 000020000000004c ffff88000d646240 ffff88000d179c28 [ 84.225387] ffffffff811346a4 ffff880000270000 0000000000000000 0000000000000006 [ 84.227294] Call Trace: [ 84.227867] [<ffffffff82562956>] dump_stack+0x27/0x30 [ 84.229045] [<ffffffff811333f1>] bad_page+0x130/0x158 [ 84.230261] [<ffffffff811346a4>] free_pages_prepare+0x8b/0x1e3 [ 84.231765] [<ffffffff8113542a>] free_hot_cold_page+0x28/0x1cf [ 84.233171] [<ffffffff82585830>] ? _raw_spin_unlock_irqrestore+0x6b/0xc6 [ 84.234822] [<ffffffff81135b59>] free_hot_cold_page_list+0x30/0x5a [ 84.236311] [<ffffffff8113a4ed>] release_pages+0x251/0x267 [ 84.237653] [<ffffffff8112a88d>] ? delete_from_page_cache+0x48/0x9e [ 84.239142] [<ffffffff8113ad93>] __pagevec_release+0x2b/0x3d [ 84.240473] [<ffffffff8113b45a>] truncate_inode_pages_range+0x1b0/0x7ce [ 84.242032] [<ffffffff810e76ab>] ? put_lock_stats.isra.20+0x1c/0x53 [ 84.243480] [<ffffffff810e77f5>] ? lock_release_holdtime+0x113/0x11f [ 84.244935] [<ffffffff8113ba8c>] truncate_inode_pages+0x14/0x1d [ 84.246337] [<ffffffff8119b3ef>] evict+0x11f/0x232 [ 84.247501] [<ffffffff8119c527>] iput+0x1a5/0x218 [ 84.248607] [<ffffffff8118f015>] do_unlinkat+0x19b/0x25a [ 84.249828] [<ffffffff810ea993>] ? trace_hardirqs_on_caller+0x210/0x2ce [ 84.251382] [<ffffffff8144372e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 84.252879] [<ffffffff8118f10d>] SyS_unlinkat+0x39/0x4c [ 84.254174] [<ffffffff825874d6>] system_call_fastpath+0x1a/0x1f [ 84.255596] Disabling lock debugging due to kernel taint The problem was that a page marked for activation was released via pagevec. This patch clears the active bit before freeing in this case. Signed-off-by: Mel Gorman <mgorman@suse.de> Reported-and-Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Paul Reioux <reioux@gmail.com>
aejsmith
pushed a commit
to aejsmith/linux
that referenced
this pull request
Jul 20, 2015
MIPS: Ci20: Change DT node for LED triggers to match silkscreen
torvalds
pushed a commit
that referenced
this pull request
Sep 25, 2015
This fixes a bug which results in stale vcore pointers being left in the per-cpu preempted vcore lists when a VM is destroyed. The result of the stale vcore pointers is usually either a crash or a lockup inside collect_piggybacks() when another VM is run. A typical lockup message looks like: [ 472.161074] NMI watchdog: BUG: soft lockup - CPU#24 stuck for 22s! [qemu-system-ppc:7039] [ 472.161204] Modules linked in: kvm_hv kvm_pr kvm xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw ses enclosure shpchp rtc_opal i2c_opal powernv_rng binfmt_misc dm_service_time scsi_dh_alua radeon i2c_algo_bit drm_kms_helper ttm drm tg3 ptp pps_core cxgb3 ipr i2c_core mdio dm_multipath [last unloaded: kvm_hv] [ 472.162111] CPU: 24 PID: 7039 Comm: qemu-system-ppc Not tainted 4.2.0-kvm+ #49 [ 472.162187] task: c000001e38512750 ti: c000001e41bfc000 task.ti: c000001e41bfc000 [ 472.162262] NIP: c00000000096b094 LR: c00000000096b08c CTR: c000000000111130 [ 472.162337] REGS: c000001e41bff520 TRAP: 0901 Not tainted (4.2.0-kvm+) [ 472.162399] MSR: 9000000100009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 24848844 XER: 00000000 [ 472.162588] CFAR: c00000000096b0ac SOFTE: 1 GPR00: c000000000111170 c000001e41bff7a0 c00000000127df00 0000000000000001 GPR04: 0000000000000003 0000000000000001 0000000000000000 0000000000874821 GPR08: c000001e41bff8e0 0000000000000001 0000000000000000 d00000000efde740 GPR12: c000000000111130 c00000000fdae400 [ 472.163053] NIP [c00000000096b094] _raw_spin_lock_irqsave+0xa4/0x130 [ 472.163117] LR [c00000000096b08c] _raw_spin_lock_irqsave+0x9c/0x130 [ 472.163179] Call Trace: [ 472.163206] [c000001e41bff7a0] [c000001e41bff7f0] 0xc000001e41bff7f0 (unreliable) [ 472.163295] [c000001e41bff7e0] [c000000000111170] __wake_up+0x40/0x90 [ 472.163375] [c000001e41bff830] [d00000000efd6fc0] kvmppc_run_core+0x1240/0x1950 [kvm_hv] [ 472.163465] [c000001e41bffa30] [d00000000efd8510] kvmppc_vcpu_run_hv+0x5a0/0xd90 [kvm_hv] [ 472.163559] [c000001e41bffb70] [d00000000e9318a4] kvmppc_vcpu_run+0x44/0x60 [kvm] [ 472.163653] [c000001e41bffba0] [d00000000e92e674] kvm_arch_vcpu_ioctl_run+0x64/0x170 [kvm] [ 472.163745] [c000001e41bffbe0] [d00000000e9263a8] kvm_vcpu_ioctl+0x538/0x7b0 [kvm] [ 472.163834] [c000001e41bffd40] [c0000000002d0f50] do_vfs_ioctl+0x480/0x7c0 [ 472.163910] [c000001e41bffde0] [c0000000002d1364] SyS_ioctl+0xd4/0xf0 [ 472.163986] [c000001e41bffe30] [c000000000009260] system_call+0x38/0xd0 [ 472.164060] Instruction dump: [ 472.164098] ebc1fff0 ebe1fff8 7c0803a6 4e800020 60000000 60000000 60420000 8bad02e2 [ 472.164224] 7fc3f378 4b6a57c1 60000000 7c210b78 <e92d0000> 89290009 792affe3 40820070 The bug is that kvmppc_run_vcpu does not correctly handle the case where a vcpu task receives a signal while its guest vcpu is executing in the guest as a result of being piggy-backed onto the execution of another vcore. In that case we need to wait for the vcpu to finish executing inside the guest, and then remove this vcore from the preempted vcores list. That way, we avoid leaving this vcpu's vcore on the preempted vcores list when the vcpu gets interrupted. Fixes: ec25716 Reported-by: Thomas Huth <thuth@redhat.com> Tested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
0day-ci
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Nov 24, 2015
If a user key gets negatively instantiated, an error code is cached in the
payload area. A negatively instantiated key may be then be positively
instantiated by updating it with valid data. However, the ->update key
type method must be aware that the error code may be there.
The following may be used to trigger the bug in the user key type:
keyctl request2 user user "" @U
keyctl add user user "a" @U
which manifests itself as:
BUG: unable to handle kernel paging request at 00000000ffffff8a
IP: [<ffffffff810a376f>] __call_rcu.constprop.76+0x1f/0x280 kernel/rcu/tree.c:3046
PGD 7cc30067 PUD 0
Oops: 0002 [#1] SMP
Modules linked in:
CPU: 3 PID: 2644 Comm: a.out Not tainted 4.3.0+ torvalds#49
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff88003ddea700 ti: ffff88003dd88000 task.ti: ffff88003dd88000
RIP: 0010:[<ffffffff810a376f>] [<ffffffff810a376f>] __call_rcu.constprop.76+0x1f/0x280
[<ffffffff810a376f>] __call_rcu.constprop.76+0x1f/0x280 kernel/rcu/tree.c:3046
RSP: 0018:ffff88003dd8bdb0 EFLAGS: 00010246
RAX: 00000000ffffff82 RBX: 0000000000000000 RCX: 0000000000000001
RDX: ffffffff81e3fe40 RSI: 0000000000000000 RDI: 00000000ffffff82
RBP: ffff88003dd8bde0 R08: ffff88007d2d2da0 R09: 0000000000000000
R10: 0000000000000000 R11: ffff88003e8073c0 R12: 00000000ffffff82
R13: ffff88003dd8be68 R14: ffff88007d027600 R15: ffff88003ddea700
FS: 0000000000b92880(0063) GS:ffff88007fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000ffffff8a CR3: 000000007cc5f000 CR4: 00000000000006e0
Stack:
ffff88003dd8bdf0 ffffffff81160a8a 0000000000000000 00000000ffffff82
ffff88003dd8be68 ffff88007d027600 ffff88003dd8bdf0 ffffffff810a39e5
ffff88003dd8be20 ffffffff812a31ab ffff88007d027600 ffff88007d027620
Call Trace:
[<ffffffff810a39e5>] kfree_call_rcu+0x15/0x20 kernel/rcu/tree.c:3136
[<ffffffff812a31ab>] user_update+0x8b/0xb0 security/keys/user_defined.c:129
[< inline >] __key_update security/keys/key.c:730
[<ffffffff8129e5c1>] key_create_or_update+0x291/0x440 security/keys/key.c:908
[< inline >] SYSC_add_key security/keys/keyctl.c:125
[<ffffffff8129fc21>] SyS_add_key+0x101/0x1e0 security/keys/keyctl.c:60
[<ffffffff8185f617>] entry_SYSCALL_64_fastpath+0x12/0x6a arch/x86/entry/entry_64.S:185
Note the error code (-ENOKEY) in EDX.
A similar bug can be tripped by:
keyctl request2 trusted user "" @U
keyctl add trusted user "a" @U
This should also affect encrypted keys - but that has to be correctly
parameterised or it will fail with EINVAL before getting to the bit that
will crashes.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
torvalds
pushed a commit
that referenced
this pull request
Nov 27, 2015
If a user key gets negatively instantiated, an error code is cached in the
payload area. A negatively instantiated key may be then be positively
instantiated by updating it with valid data. However, the ->update key
type method must be aware that the error code may be there.
The following may be used to trigger the bug in the user key type:
keyctl request2 user user "" @U
keyctl add user user "a" @U
which manifests itself as:
BUG: unable to handle kernel paging request at 00000000ffffff8a
IP: [<ffffffff810a376f>] __call_rcu.constprop.76+0x1f/0x280 kernel/rcu/tree.c:3046
PGD 7cc30067 PUD 0
Oops: 0002 [#1] SMP
Modules linked in:
CPU: 3 PID: 2644 Comm: a.out Not tainted 4.3.0+ #49
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff88003ddea700 ti: ffff88003dd88000 task.ti: ffff88003dd88000
RIP: 0010:[<ffffffff810a376f>] [<ffffffff810a376f>] __call_rcu.constprop.76+0x1f/0x280
[<ffffffff810a376f>] __call_rcu.constprop.76+0x1f/0x280 kernel/rcu/tree.c:3046
RSP: 0018:ffff88003dd8bdb0 EFLAGS: 00010246
RAX: 00000000ffffff82 RBX: 0000000000000000 RCX: 0000000000000001
RDX: ffffffff81e3fe40 RSI: 0000000000000000 RDI: 00000000ffffff82
RBP: ffff88003dd8bde0 R08: ffff88007d2d2da0 R09: 0000000000000000
R10: 0000000000000000 R11: ffff88003e8073c0 R12: 00000000ffffff82
R13: ffff88003dd8be68 R14: ffff88007d027600 R15: ffff88003ddea700
FS: 0000000000b92880(0063) GS:ffff88007fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000ffffff8a CR3: 000000007cc5f000 CR4: 00000000000006e0
Stack:
ffff88003dd8bdf0 ffffffff81160a8a 0000000000000000 00000000ffffff82
ffff88003dd8be68 ffff88007d027600 ffff88003dd8bdf0 ffffffff810a39e5
ffff88003dd8be20 ffffffff812a31ab ffff88007d027600 ffff88007d027620
Call Trace:
[<ffffffff810a39e5>] kfree_call_rcu+0x15/0x20 kernel/rcu/tree.c:3136
[<ffffffff812a31ab>] user_update+0x8b/0xb0 security/keys/user_defined.c:129
[< inline >] __key_update security/keys/key.c:730
[<ffffffff8129e5c1>] key_create_or_update+0x291/0x440 security/keys/key.c:908
[< inline >] SYSC_add_key security/keys/keyctl.c:125
[<ffffffff8129fc21>] SyS_add_key+0x101/0x1e0 security/keys/keyctl.c:60
[<ffffffff8185f617>] entry_SYSCALL_64_fastpath+0x12/0x6a arch/x86/entry/entry_64.S:185
Note the error code (-ENOKEY) in EDX.
A similar bug can be tripped by:
keyctl request2 trusted user "" @U
keyctl add trusted user "a" @U
This should also affect encrypted keys - but that has to be correctly
parameterised or it will fail with EINVAL before getting to the bit that
will crashes.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
diaevd
referenced
this pull request
in diaevd/zen-kernel
Dec 30, 2015
…11-kernels Correct the KERNEL_VERSION logic regarding whether or not
nkskjames
referenced
this pull request
in nkskjames/linux
Jan 13, 2016
This fixes a bug which results in stale vcore pointers being left in the per-cpu preempted vcore lists when a VM is destroyed. The result of the stale vcore pointers is usually either a crash or a lockup inside collect_piggybacks() when another VM is run. A typical lockup message looks like: [ 472.161074] NMI watchdog: BUG: soft lockup - CPU#24 stuck for 22s! [qemu-system-ppc:7039] [ 472.161204] Modules linked in: kvm_hv kvm_pr kvm xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw ses enclosure shpchp rtc_opal i2c_opal powernv_rng binfmt_misc dm_service_time scsi_dh_alua radeon i2c_algo_bit drm_kms_helper ttm drm tg3 ptp pps_core cxgb3 ipr i2c_core mdio dm_multipath [last unloaded: kvm_hv] [ 472.162111] CPU: 24 PID: 7039 Comm: qemu-system-ppc Not tainted 4.2.0-kvm+ openbmc#49 [ 472.162187] task: c000001e38512750 ti: c000001e41bfc000 task.ti: c000001e41bfc000 [ 472.162262] NIP: c00000000096b094 LR: c00000000096b08c CTR: c000000000111130 [ 472.162337] REGS: c000001e41bff520 TRAP: 0901 Not tainted (4.2.0-kvm+) [ 472.162399] MSR: 9000000100009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 24848844 XER: 00000000 [ 472.162588] CFAR: c00000000096b0ac SOFTE: 1 GPR00: c000000000111170 c000001e41bff7a0 c00000000127df00 0000000000000001 GPR04: 0000000000000003 0000000000000001 0000000000000000 0000000000874821 GPR08: c000001e41bff8e0 0000000000000001 0000000000000000 d00000000efde740 GPR12: c000000000111130 c00000000fdae400 [ 472.163053] NIP [c00000000096b094] _raw_spin_lock_irqsave+0xa4/0x130 [ 472.163117] LR [c00000000096b08c] _raw_spin_lock_irqsave+0x9c/0x130 [ 472.163179] Call Trace: [ 472.163206] [c000001e41bff7a0] [c000001e41bff7f0] 0xc000001e41bff7f0 (unreliable) [ 472.163295] [c000001e41bff7e0] [c000000000111170] __wake_up+0x40/0x90 [ 472.163375] [c000001e41bff830] [d00000000efd6fc0] kvmppc_run_core+0x1240/0x1950 [kvm_hv] [ 472.163465] [c000001e41bffa30] [d00000000efd8510] kvmppc_vcpu_run_hv+0x5a0/0xd90 [kvm_hv] [ 472.163559] [c000001e41bffb70] [d00000000e9318a4] kvmppc_vcpu_run+0x44/0x60 [kvm] [ 472.163653] [c000001e41bffba0] [d00000000e92e674] kvm_arch_vcpu_ioctl_run+0x64/0x170 [kvm] [ 472.163745] [c000001e41bffbe0] [d00000000e9263a8] kvm_vcpu_ioctl+0x538/0x7b0 [kvm] [ 472.163834] [c000001e41bffd40] [c0000000002d0f50] do_vfs_ioctl+0x480/0x7c0 [ 472.163910] [c000001e41bffde0] [c0000000002d1364] SyS_ioctl+0xd4/0xf0 [ 472.163986] [c000001e41bffe30] [c000000000009260] system_call+0x38/0xd0 [ 472.164060] Instruction dump: [ 472.164098] ebc1fff0 ebe1fff8 7c0803a6 4e800020 60000000 60000000 60420000 8bad02e2 [ 472.164224] 7fc3f378 4b6a57c1 60000000 7c210b78 <e92d0000> 89290009 792affe3 40820070 The bug is that kvmppc_run_vcpu does not correctly handle the case where a vcpu task receives a signal while its guest vcpu is executing in the guest as a result of being piggy-backed onto the execution of another vcore. In that case we need to wait for the vcpu to finish executing inside the guest, and then remove this vcore from the preempted vcores list. That way, we avoid leaving this vcpu's vcore on the preempted vcores list when the vcpu gets interrupted. Fixes: ec25716 Reported-by: Thomas Huth <thuth@redhat.com> Tested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
alaahl
pushed a commit
to alaahl/linux
that referenced
this pull request
Feb 24, 2016
…place functions In the mac and vlan register/unregister/replace functions, the driver locks the mac table mutex (or vlan table mutex) on both ports. Use mutex_lock_nested() to prevent warnings, such as the one below. [ 101.828445] ============================================= [ 101.834820] [ INFO: possible recursive locking detected ] [ 101.841199] 4.5.0-rc2-cmpn_stream_dbg-vm_2016_02_22-14_48_g759ca5d torvalds#49 Not tainted [ 101.850251] --------------------------------------------- [ 101.856621] modprobe/3054 is trying to acquire lock: [ 101.862514] (&table->mutex#2){+.+.+.}, at: [<ffffffffa079c10e>] __mlx4_register_mac+0x87e/0xa90 [mlx4_core] [ 101.874598] [ 101.874598] but task is already holding lock: [ 101.881703] (&table->mutex#2){+.+.+.}, at: [<ffffffffa079c0f0>] __mlx4_register_mac+0x860/0xa90 [mlx4_core] [ 101.893776] [ 101.893776] other info that might help us debug this: [ 101.901658] Possible unsafe locking scenario: [ 101.901658] [ 101.908859] CPU0 [ 101.911923] ---- [ 101.914985] lock(&table->mutex#2); [ 101.919595] lock(&table->mutex#2); [ 101.924199] [ 101.924199] * DEADLOCK * [ 101.924199] [ 101.931643] May be due to missing lock nesting notation This fix used here is the same as the one used by Haggai Eran in commit 31b57b8 ("IB/ucma: Fix lockdep warning in ucma_lock_files"). issue: 736271 Change-Id: Ic74edc755ef8c7d15bd96a122aa484f9b442cce4 Fixes: 5f61385 ("net/mlx4_core: Keep VLAN/MAC tables mirrored in multifunc HA mode") Suggested-by: Doron Tsur <doront@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
alaahl
pushed a commit
to alaahl/linux
that referenced
this pull request
Feb 25, 2016
…place functions In the mac and vlan register/unregister/replace functions, the driver locks the mac table mutex (or vlan table mutex) on both ports. Use mutex_lock_nested() to prevent warnings, such as the one below. [ 101.828445] ============================================= [ 101.834820] [ INFO: possible recursive locking detected ] [ 101.841199] 4.5.0-rc2-cmpn_stream_dbg-vm_2016_02_22-14_48_g759ca5d torvalds#49 Not tainted [ 101.850251] --------------------------------------------- [ 101.856621] modprobe/3054 is trying to acquire lock: [ 101.862514] (&table->mutex#2){+.+.+.}, at: [<ffffffffa079c10e>] __mlx4_register_mac+0x87e/0xa90 [mlx4_core] [ 101.874598] [ 101.874598] but task is already holding lock: [ 101.881703] (&table->mutex#2){+.+.+.}, at: [<ffffffffa079c0f0>] __mlx4_register_mac+0x860/0xa90 [mlx4_core] [ 101.893776] [ 101.893776] other info that might help us debug this: [ 101.901658] Possible unsafe locking scenario: [ 101.901658] [ 101.908859] CPU0 [ 101.911923] ---- [ 101.914985] lock(&table->mutex#2); [ 101.919595] lock(&table->mutex#2); [ 101.924199] [ 101.924199] * DEADLOCK * [ 101.924199] [ 101.931643] May be due to missing lock nesting notation This fix used here is the same as the one used by Haggai Eran in commit 31b57b8 ("IB/ucma: Fix lockdep warning in ucma_lock_files"). issue: 736271 Change-Id: Ic74edc755ef8c7d15bd96a122aa484f9b442cce4 Fixes: 5f61385 ("net/mlx4_core: Keep VLAN/MAC tables mirrored in multifunc HA mode") Suggested-by: Doron Tsur <doront@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
alaahl
pushed a commit
to alaahl/linux
that referenced
this pull request
Feb 28, 2016
…place functions In the mac and vlan register/unregister/replace functions, the driver locks the mac table mutex (or vlan table mutex) on both ports. Use mutex_lock_nested() to prevent warnings, such as the one below. [ 101.828445] ============================================= [ 101.834820] [ INFO: possible recursive locking detected ] [ 101.841199] 4.5.0-rc2-cmpn_stream_dbg-vm_2016_02_22-14_48_g759ca5d torvalds#49 Not tainted [ 101.850251] --------------------------------------------- [ 101.856621] modprobe/3054 is trying to acquire lock: [ 101.862514] (&table->mutex#2){+.+.+.}, at: [<ffffffffa079c10e>] __mlx4_register_mac+0x87e/0xa90 [mlx4_core] [ 101.874598] [ 101.874598] but task is already holding lock: [ 101.881703] (&table->mutex#2){+.+.+.}, at: [<ffffffffa079c0f0>] __mlx4_register_mac+0x860/0xa90 [mlx4_core] [ 101.893776] [ 101.893776] other info that might help us debug this: [ 101.901658] Possible unsafe locking scenario: [ 101.901658] [ 101.908859] CPU0 [ 101.911923] ---- [ 101.914985] lock(&table->mutex#2); [ 101.919595] lock(&table->mutex#2); [ 101.924199] [ 101.924199] * DEADLOCK * [ 101.924199] [ 101.931643] May be due to missing lock nesting notation This fix used here is the same as the one used by Haggai Eran in commit 31b57b8 ("IB/ucma: Fix lockdep warning in ucma_lock_files"). issue: 736271 Change-Id: Ic74edc755ef8c7d15bd96a122aa484f9b442cce4 Fixes: 5f61385 ("net/mlx4_core: Keep VLAN/MAC tables mirrored in multifunc HA mode") Suggested-by: Doron Tsur <doront@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
alaahl
pushed a commit
to alaahl/linux
that referenced
this pull request
Mar 1, 2016
…place functions In the mac and vlan register/unregister/replace functions, the driver locks the mac table mutex (or vlan table mutex) on both ports. Use mutex_lock_nested() to prevent warnings, such as the one below. [ 101.828445] ============================================= [ 101.834820] [ INFO: possible recursive locking detected ] [ 101.841199] 4.5.0-rc2-cmpn_stream_dbg-vm_2016_02_22-14_48_g759ca5d torvalds#49 Not tainted [ 101.850251] --------------------------------------------- [ 101.856621] modprobe/3054 is trying to acquire lock: [ 101.862514] (&table->mutex#2){+.+.+.}, at: [<ffffffffa079c10e>] __mlx4_register_mac+0x87e/0xa90 [mlx4_core] [ 101.874598] [ 101.874598] but task is already holding lock: [ 101.881703] (&table->mutex#2){+.+.+.}, at: [<ffffffffa079c0f0>] __mlx4_register_mac+0x860/0xa90 [mlx4_core] [ 101.893776] [ 101.893776] other info that might help us debug this: [ 101.901658] Possible unsafe locking scenario: [ 101.901658] [ 101.908859] CPU0 [ 101.911923] ---- [ 101.914985] lock(&table->mutex#2); [ 101.919595] lock(&table->mutex#2); [ 101.924199] [ 101.924199] * DEADLOCK * [ 101.924199] [ 101.931643] May be due to missing lock nesting notation This fix used here is the same as the one used by Haggai Eran in commit 31b57b8 ("IB/ucma: Fix lockdep warning in ucma_lock_files"). issue: 736271 Change-Id: Ic74edc755ef8c7d15bd96a122aa484f9b442cce4 Fixes: 5f61385 ("net/mlx4_core: Keep VLAN/MAC tables mirrored in multifunc HA mode") Suggested-by: Doron Tsur <doront@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
0day-ci
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Mar 3, 2016
In the mac and vlan register/unregister/replace functions, the driver locks the mac table mutex (or vlan table mutex) on both ports. We move to use mutex_lock_nested() to prevent warnings, such as the one below. [ 101.828445] ============================================= [ 101.834820] [ INFO: possible recursive locking detected ] [ 101.841199] 4.5.0-rc2+ torvalds#49 Not tainted [ 101.850251] --------------------------------------------- [ 101.856621] modprobe/3054 is trying to acquire lock: [ 101.862514] (&table->mutex#2){+.+.+.}, at: [<ffffffffa079c10e>] __mlx4_register_mac+0x87e/0xa90 [mlx4_core] [ 101.874598] [ 101.874598] but task is already holding lock: [ 101.881703] (&table->mutex#2){+.+.+.}, at: [<ffffffffa079c0f0>] __mlx4_register_mac+0x860/0xa90 [mlx4_core] [ 101.893776] [ 101.893776] other info that might help us debug this: [ 101.901658] Possible unsafe locking scenario: [ 101.901658] [ 101.908859] CPU0 [ 101.911923] ---- [ 101.914985] lock(&table->mutex#2); [ 101.919595] lock(&table->mutex#2); [ 101.924199] [ 101.924199] * DEADLOCK * [ 101.924199] [ 101.931643] May be due to missing lock nesting notation Fixes: 5f61385 ('net/mlx4_core: Keep VLAN/MAC tables mirrored in multifunc HA mode') Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Suggested-by: Doron Tsur <doront@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
alaahl
pushed a commit
to alaahl/linux
that referenced
this pull request
Mar 6, 2016
…place functions In the mac and vlan register/unregister/replace functions, the driver locks the mac table mutex (or vlan table mutex) on both ports. Use mutex_lock_nested() to prevent warnings, such as the one below. [ 101.828445] ============================================= [ 101.834820] [ INFO: possible recursive locking detected ] [ 101.841199] 4.5.0-rc2-cmpn_stream_dbg-vm_2016_02_22-14_48_g759ca5d torvalds#49 Not tainted [ 101.850251] --------------------------------------------- [ 101.856621] modprobe/3054 is trying to acquire lock: [ 101.862514] (&table->mutex#2){+.+.+.}, at: [<ffffffffa079c10e>] __mlx4_register_mac+0x87e/0xa90 [mlx4_core] [ 101.874598] [ 101.874598] but task is already holding lock: [ 101.881703] (&table->mutex#2){+.+.+.}, at: [<ffffffffa079c0f0>] __mlx4_register_mac+0x860/0xa90 [mlx4_core] [ 101.893776] [ 101.893776] other info that might help us debug this: [ 101.901658] Possible unsafe locking scenario: [ 101.901658] [ 101.908859] CPU0 [ 101.911923] ---- [ 101.914985] lock(&table->mutex#2); [ 101.919595] lock(&table->mutex#2); [ 101.924199] [ 101.924199] * DEADLOCK * [ 101.924199] [ 101.931643] May be due to missing lock nesting notation This fix used here is the same as the one used by Haggai Eran in commit 31b57b8 ("IB/ucma: Fix lockdep warning in ucma_lock_files"). issue: 736271 Change-Id: Ic74edc755ef8c7d15bd96a122aa484f9b442cce4 Fixes: 5f61385 ("net/mlx4_core: Keep VLAN/MAC tables mirrored in multifunc HA mode") Suggested-by: Doron Tsur <doront@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
|
Huh... Lots of references. |
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
Oct 19, 2023
Christoph Paasch reported a panic in TCP stack [1] Indeed, we should not call sk_dst_reset() without holding the socket lock, as __sk_dst_get() callers do not all rely on bare RCU. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 12bad6067 P4D 12bad6067 PUD 12bad5067 PMD 0 Oops: 0000 [#1] PREEMPT SMP CPU: 1 PID: 2750 Comm: syz-executor.5 Not tainted 6.6.0-rc4-g7a5720a344e7 torvalds#49 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:tcp_get_metrics+0x118/0x8f0 net/ipv4/tcp_metrics.c:321 Code: c7 44 24 70 02 00 8b 03 89 44 24 48 c7 44 24 4c 00 00 00 00 66 c7 44 24 58 02 00 66 ba 02 00 b1 01 89 4c 24 04 4c 89 7c 24 10 <49> 8b 0f 48 8b 89 50 05 00 00 48 89 4c 24 30 33 81 00 02 00 00 69 RSP: 0018:ffffc90000af79b8 EFLAGS: 00010293 RAX: 000000000100007f RBX: ffff88812ae8f500 RCX: ffff88812b5f8f01 RDX: 0000000000000002 RSI: ffffffff8300f080 RDI: 0000000000000002 RBP: 0000000000000002 R08: 0000000000000003 R09: ffffffff8205eca0 R10: 0000000000000002 R11: ffff88812b5f8f00 R12: ffff88812a9e0580 R13: 0000000000000000 R14: ffff88812ae8fbd2 R15: 0000000000000000 FS: 00007f70a006b640(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000012bad7003 CR4: 0000000000170ee0 Call Trace: <TASK> tcp_fastopen_cache_get+0x32/0x140 net/ipv4/tcp_metrics.c:567 tcp_fastopen_cookie_check+0x28/0x180 net/ipv4/tcp_fastopen.c:419 tcp_connect+0x9c8/0x12a0 net/ipv4/tcp_output.c:3839 tcp_v4_connect+0x645/0x6e0 net/ipv4/tcp_ipv4.c:323 __inet_stream_connect+0x120/0x590 net/ipv4/af_inet.c:676 tcp_sendmsg_fastopen+0x2d6/0x3a0 net/ipv4/tcp.c:1021 tcp_sendmsg_locked+0x1957/0x1b00 net/ipv4/tcp.c:1073 tcp_sendmsg+0x30/0x50 net/ipv4/tcp.c:1336 __sock_sendmsg+0x83/0xd0 net/socket.c:730 __sys_sendto+0x20a/0x2a0 net/socket.c:2194 __do_sys_sendto net/socket.c:2206 [inline] Fixes: e08d0b3 ("inet: implement lockless IP_TOS") Reported-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20231018090014.345158-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
logic10492
pushed a commit
to logic10492/linux-amd-zen2
that referenced
this pull request
Jan 18, 2024
Fix incorrect merge of torvalds#48
gyroninja
added a commit
to gyroninja/linux
that referenced
this pull request
Jan 28, 2024
KSAN calls into rcu code which then triggers a write that reenters into KSAN getting the system stuck doing infinite recursion. #0 kmsan_get_context () at mm/kmsan/kmsan.h:106 #1 __msan_get_context_state () at mm/kmsan/instrumentation.c:331 #2 0xffffffff81495671 in get_current () at ./arch/x86/include/asm/current.h:42 #3 rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 #4 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 #5 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#6 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#7 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#8 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#9 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#10 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#11 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#12 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#13 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#14 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#15 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#16 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#17 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#18 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#19 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#20 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#21 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#22 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#23 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#24 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#25 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#26 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#27 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#28 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#29 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#30 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#31 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#32 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#33 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#34 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#35 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#36 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#37 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#38 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#39 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#40 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#41 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#42 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#43 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#44 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#45 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#46 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#47 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#48 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#49 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#50 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#51 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 #52 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 #53 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#54 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#55 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#56 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#57 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 #58 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#59 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#60 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#61 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#62 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#63 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#64 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#65 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#66 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#67 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#68 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#69 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 #70 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#71 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#72 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#73 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#74 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#75 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#76 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#77 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff86203c90) at ./arch/x86/include/asm/kmsan.h:82 torvalds#78 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff86203c90) at mm/kmsan/shadow.c:75 torvalds#79 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff86203c90, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#80 kmsan_get_shadow_origin_ptr (address=0xffffffff86203c90, size=8, store=false) at mm/kmsan/shadow.c:97 torvalds#81 0xffffffff81b1dc72 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=8, store=false) at mm/kmsan/instrumentation.c:36 torvalds#82 __msan_metadata_ptr_for_load_8 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:92 torvalds#83 0xffffffff814fdb9e in filter_irq_stacks (entries=<optimized out>, nr_entries=4) at kernel/stacktrace.c:397 torvalds#84 0xffffffff829520e8 in stack_depot_save_flags (entries=0xffffffff8620d974 <init_task+1012>, nr_entries=4, alloc_flags=0, depot_flags=0) at lib/stackdepot.c:500 torvalds#85 0xffffffff81b1e560 in __msan_poison_alloca (address=0xffffffff86203da0, size=24, descr=<optimized out>) at mm/kmsan/instrumentation.c:285 torvalds#86 0xffffffff8562821c in _printk (fmt=0xffffffff85f191a5 "\0016Attempting lock1") at kernel/printk/printk.c:2324 torvalds#87 0xffffffff81942aa2 in kmem_cache_create_usercopy (name=0xffffffff85f18903 "mm_struct", size=1296, align=0, flags=270336, useroffset=<optimized out>, usersize=<optimized out>, ctor=0x0 <fixed_percpu_data>) at mm/slab_common.c:296 torvalds#88 0xffffffff86f337a0 in mm_cache_init () at kernel/fork.c:3262 torvalds#89 0xffffffff86eacb8e in start_kernel () at init/main.c:932 torvalds#90 0xffffffff86ecdf94 in x86_64_start_reservations (real_mode_data=0x140e0 <exception_stacks+28896> <error: Cannot access memory at address 0x140e0>) at arch/x86/kernel/head64.c:555 torvalds#91 0xffffffff86ecde9b in x86_64_start_kernel (real_mode_data=0x140e0 <exception_stacks+28896> <error: Cannot access memory at address 0x140e0>) at arch/x86/kernel/head64.c:536 torvalds#92 0xffffffff810001d3 in secondary_startup_64 () at /pool/workspace/linux/arch/x86/kernel/head_64.S:461 torvalds#93 0x0000000000000000 in ??
gyroninja
added a commit
to gyroninja/linux
that referenced
this pull request
Jan 28, 2024
As of 5ec8e8e(mm/sparsemem: fix race in accessing memory_section->usage) KMSAN now calls into RCU tree code during kmsan_get_metadata. This will trigger a write that will reenter into KMSAN getting the system stuck doing infinite recursion. #0 kmsan_get_context () at mm/kmsan/kmsan.h:106 #1 __msan_get_context_state () at mm/kmsan/instrumentation.c:331 #2 0xffffffff81495671 in get_current () at ./arch/x86/include/asm/current.h:42 #3 rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 #4 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 #5 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#6 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#7 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#8 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#9 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#10 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#11 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#12 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#13 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#14 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#15 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#16 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#17 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#18 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#19 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#20 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#21 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#22 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#23 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#24 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#25 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#26 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#27 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#28 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#29 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#30 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#31 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#32 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#33 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#34 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#35 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#36 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#37 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#38 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#39 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#40 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#41 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#42 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#43 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#44 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#45 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#46 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#47 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#48 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#49 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#50 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#51 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 #52 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 #53 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#54 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#55 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#56 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#57 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 #58 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#59 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#60 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#61 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#62 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#63 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#64 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#65 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#66 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#67 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#68 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#69 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 #70 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#71 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#72 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#73 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#74 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#75 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#76 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#77 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff86203c90) at ./arch/x86/include/asm/kmsan.h:82 torvalds#78 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff86203c90) at mm/kmsan/shadow.c:75 torvalds#79 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff86203c90, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#80 kmsan_get_shadow_origin_ptr (address=0xffffffff86203c90, size=8, store=false) at mm/kmsan/shadow.c:97 torvalds#81 0xffffffff81b1dc72 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=8, store=false) at mm/kmsan/instrumentation.c:36 torvalds#82 __msan_metadata_ptr_for_load_8 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:92 torvalds#83 0xffffffff814fdb9e in filter_irq_stacks (entries=<optimized out>, nr_entries=4) at kernel/stacktrace.c:397 torvalds#84 0xffffffff829520e8 in stack_depot_save_flags (entries=0xffffffff8620d974 <init_task+1012>, nr_entries=4, alloc_flags=0, depot_flags=0) at lib/stackdepot.c:500 torvalds#85 0xffffffff81b1e560 in __msan_poison_alloca (address=0xffffffff86203da0, size=24, descr=<optimized out>) at mm/kmsan/instrumentation.c:285 torvalds#86 0xffffffff8562821c in _printk (fmt=0xffffffff85f191a5 "\0016Attempting lock1") at kernel/printk/printk.c:2324 torvalds#87 0xffffffff81942aa2 in kmem_cache_create_usercopy (name=0xffffffff85f18903 "mm_struct", size=1296, align=0, flags=270336, useroffset=<optimized out>, usersize=<optimized out>, ctor=0x0 <fixed_percpu_data>) at mm/slab_common.c:296 torvalds#88 0xffffffff86f337a0 in mm_cache_init () at kernel/fork.c:3262 torvalds#89 0xffffffff86eacb8e in start_kernel () at init/main.c:932 torvalds#90 0xffffffff86ecdf94 in x86_64_start_reservations (real_mode_data=0x140e0 <exception_stacks+28896> <error: Cannot access memory at address 0x140e0>) at arch/x86/kernel/head64.c:555 torvalds#91 0xffffffff86ecde9b in x86_64_start_kernel (real_mode_data=0x140e0 <exception_stacks+28896> <error: Cannot access memory at address 0x140e0>) at arch/x86/kernel/head64.c:536 torvalds#92 0xffffffff810001d3 in secondary_startup_64 () at /pool/workspace/linux/arch/x86/kernel/head_64.S:461 torvalds#93 0x0000000000000000 in ??
alobakin
added a commit
to alobakin/linux
that referenced
this pull request
Feb 26, 2024
bnxt_alloc_mem() dereferences ::vnic_info in the variable declaration block, but allocates it much later. As a result, the following crash happens on my setup: BUG: kernel NULL pointer dereference, address: 0000000000000090 fbcon: Taking over console #PF: supervisor write access in kernel mode #PF: error_code (0x0002) - not-present page PGD 12f382067 P4D 0 Oops: 8002 [#1] PREEMPT SMP NOPTI CPU: 47 PID: 2516 Comm: NetworkManager Not tainted 6.8.0-rc5-libeth+ torvalds#49 Hardware name: Intel Corporation M50CYP2SBSTD/M58CYP2SBSTD, BIOS SE5C620.86B.01.01.0088.2305172341 05/17/2023 RIP: 0010:bnxt_alloc_mem+0x1609/0x1910 [bnxt_en] Code: 81 c8 48 83 c8 08 31 c9 e9 d7 fe ff ff c7 44 24 Oc 00 00 00 00 49 89 d5 e9 2d fe ff ff 41 89 c6 e9 88 00 00 00 48 8b 44 24 50 <80> 88 90 00 00 00 Od 8b 43 74 a8 02 75 1e f6 83 14 02 00 00 80 74 RSP: 0018:ff3f25580f3432c8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ff15a5cfc45249e0 RCX: 0000002079777000 RDX: ff15a5dfb9767000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ff15a5dfb9777000 R11: ffffff8000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000020 R15: ff15a5cfce34f540 FS: 000007fb9a160500(0000) GS:ff15a5dfbefc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CRO: 0000000080050033 CR2: 0000000000000090 CR3: 0000000109efc00Z CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DRZ: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x68/0xb0 ? page_fault_oops+0x3a6/0x400 ? exc_page_fault+0x7a/0x1b0 ? asm_exc_page_fault+0x26/8x30 ? bnxt_alloc_mem+0x1609/0x1910 [bnxt_en] ? bnxt_alloc_mem+0x1389/8x1918 [bnxt_en] _bnxt_open_nic+0x198/0xa50 [bnxt_en] ? bnxt_hurm_if_change+0x287/0x3d0 [bnxt_en] bnxt_open+0xeb/0x1b0 [bnxt_en] _dev_open+0x12e/0x1f0 _dev_change_flags+0xb0/0x200 dev_change_flags+0x25/0x60 do_setlink+0x463/0x1260 ? sock_def_readable+0x14/0xc0 ? rtnl_getlink+0x4b9/0x590 ? _nla_validate_parse+0x91/0xfa0 rtnl_newlink+0xbac/0xe40 <...> Don't create a variable and dereference the first array member directly since it's used only once in the code. Fixes: ef4ee64 ("bnxt_en: Define BNXT_VNIC_DEFAULT for the default vnic index") Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
alobakin
added a commit
to alobakin/linux
that referenced
this pull request
Feb 26, 2024
bnxt_alloc_mem() dereferences ::vnic_info in the variable declaration block, but allocates it much later. As a result, the following crash happens on my setup: BUG: kernel NULL pointer dereference, address: 0000000000000090 fbcon: Taking over console #PF: supervisor write access in kernel mode #PF: error_code (0x0002) - not-present page PGD 12f382067 P4D 0 Oops: 8002 [#1] PREEMPT SMP NOPTI CPU: 47 PID: 2516 Comm: NetworkManager Not tainted 6.8.0-rc5-libeth+ torvalds#49 Hardware name: Intel Corporation M50CYP2SBSTD/M58CYP2SBSTD, BIOS SE5C620.86B.01.01.0088.2305172341 05/17/2023 RIP: 0010:bnxt_alloc_mem+0x1609/0x1910 [bnxt_en] Code: 81 c8 48 83 c8 08 31 c9 e9 d7 fe ff ff c7 44 24 Oc 00 00 00 00 49 89 d5 e9 2d fe ff ff 41 89 c6 e9 88 00 00 00 48 8b 44 24 50 <80> 88 90 00 00 00 Od 8b 43 74 a8 02 75 1e f6 83 14 02 00 00 80 74 RSP: 0018:ff3f25580f3432c8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ff15a5cfc45249e0 RCX: 0000002079777000 RDX: ff15a5dfb9767000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ff15a5dfb9777000 R11: ffffff8000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000020 R15: ff15a5cfce34f540 FS: 000007fb9a160500(0000) GS:ff15a5dfbefc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CRO: 0000000080050033 CR2: 0000000000000090 CR3: 0000000109efc00Z CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DRZ: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x68/0xb0 ? page_fault_oops+0x3a6/0x400 ? exc_page_fault+0x7a/0x1b0 ? asm_exc_page_fault+0x26/8x30 ? bnxt_alloc_mem+0x1609/0x1910 [bnxt_en] ? bnxt_alloc_mem+0x1389/8x1918 [bnxt_en] _bnxt_open_nic+0x198/0xa50 [bnxt_en] ? bnxt_hurm_if_change+0x287/0x3d0 [bnxt_en] bnxt_open+0xeb/0x1b0 [bnxt_en] _dev_open+0x12e/0x1f0 _dev_change_flags+0xb0/0x200 dev_change_flags+0x25/0x60 do_setlink+0x463/0x1260 ? sock_def_readable+0x14/0xc0 ? rtnl_getlink+0x4b9/0x590 ? _nla_validate_parse+0x91/0xfa0 rtnl_newlink+0xbac/0xe40 <...> Don't create a variable and dereference the first array member directly since it's used only once in the code. Fixes: ef4ee64 ("bnxt_en: Define BNXT_VNIC_DEFAULT for the default vnic index") Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
kuba-moo
pushed a commit
to linux-netdev/testing
that referenced
this pull request
Feb 26, 2024
bnxt_alloc_mem() dereferences ::vnic_info in the variable declaration block, but allocates it much later. As a result, the following crash happens on my setup: BUG: kernel NULL pointer dereference, address: 0000000000000090 fbcon: Taking over console #PF: supervisor write access in kernel mode #PF: error_code (0x0002) - not-present page PGD 12f382067 P4D 0 Oops: 8002 [#1] PREEMPT SMP NOPTI CPU: 47 PID: 2516 Comm: NetworkManager Not tainted 6.8.0-rc5-libeth+ torvalds#49 Hardware name: Intel Corporation M50CYP2SBSTD/M58CYP2SBSTD, BIOS SE5C620.86B.01.01.0088.2305172341 05/17/2023 RIP: 0010:bnxt_alloc_mem+0x1609/0x1910 [bnxt_en] Code: 81 c8 48 83 c8 08 31 c9 e9 d7 fe ff ff c7 44 24 Oc 00 00 00 00 49 89 d5 e9 2d fe ff ff 41 89 c6 e9 88 00 00 00 48 8b 44 24 50 <80> 88 90 00 00 00 Od 8b 43 74 a8 02 75 1e f6 83 14 02 00 00 80 74 RSP: 0018:ff3f25580f3432c8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ff15a5cfc45249e0 RCX: 0000002079777000 RDX: ff15a5dfb9767000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ff15a5dfb9777000 R11: ffffff8000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000020 R15: ff15a5cfce34f540 FS: 000007fb9a160500(0000) GS:ff15a5dfbefc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CRO: 0000000080050033 CR2: 0000000000000090 CR3: 0000000109efc00Z CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DRZ: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x68/0xb0 ? page_fault_oops+0x3a6/0x400 ? exc_page_fault+0x7a/0x1b0 ? asm_exc_page_fault+0x26/8x30 ? bnxt_alloc_mem+0x1609/0x1910 [bnxt_en] ? bnxt_alloc_mem+0x1389/8x1918 [bnxt_en] _bnxt_open_nic+0x198/0xa50 [bnxt_en] ? bnxt_hurm_if_change+0x287/0x3d0 [bnxt_en] bnxt_open+0xeb/0x1b0 [bnxt_en] _dev_open+0x12e/0x1f0 _dev_change_flags+0xb0/0x200 dev_change_flags+0x25/0x60 do_setlink+0x463/0x1260 ? sock_def_readable+0x14/0xc0 ? rtnl_getlink+0x4b9/0x590 ? _nla_validate_parse+0x91/0xfa0 rtnl_newlink+0xbac/0xe40 <...> Don't create a variable and dereference the first array member directly since it's used only once in the code. Fixes: ef4ee64 ("bnxt_en: Define BNXT_VNIC_DEFAULT for the default vnic index") Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: NipaLocal <nipa@local>
kuba-moo
pushed a commit
to linux-netdev/testing
that referenced
this pull request
Feb 26, 2024
bnxt_alloc_mem() dereferences ::vnic_info in the variable declaration block, but allocates it much later. As a result, the following crash happens on my setup: BUG: kernel NULL pointer dereference, address: 0000000000000090 fbcon: Taking over console #PF: supervisor write access in kernel mode #PF: error_code (0x0002) - not-present page PGD 12f382067 P4D 0 Oops: 8002 [#1] PREEMPT SMP NOPTI CPU: 47 PID: 2516 Comm: NetworkManager Not tainted 6.8.0-rc5-libeth+ torvalds#49 Hardware name: Intel Corporation M50CYP2SBSTD/M58CYP2SBSTD, BIOS SE5C620.86B.01.01.0088.2305172341 05/17/2023 RIP: 0010:bnxt_alloc_mem+0x1609/0x1910 [bnxt_en] Code: 81 c8 48 83 c8 08 31 c9 e9 d7 fe ff ff c7 44 24 Oc 00 00 00 00 49 89 d5 e9 2d fe ff ff 41 89 c6 e9 88 00 00 00 48 8b 44 24 50 <80> 88 90 00 00 00 Od 8b 43 74 a8 02 75 1e f6 83 14 02 00 00 80 74 RSP: 0018:ff3f25580f3432c8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ff15a5cfc45249e0 RCX: 0000002079777000 RDX: ff15a5dfb9767000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ff15a5dfb9777000 R11: ffffff8000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000020 R15: ff15a5cfce34f540 FS: 000007fb9a160500(0000) GS:ff15a5dfbefc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CRO: 0000000080050033 CR2: 0000000000000090 CR3: 0000000109efc00Z CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DRZ: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x68/0xb0 ? page_fault_oops+0x3a6/0x400 ? exc_page_fault+0x7a/0x1b0 ? asm_exc_page_fault+0x26/8x30 ? bnxt_alloc_mem+0x1609/0x1910 [bnxt_en] ? bnxt_alloc_mem+0x1389/8x1918 [bnxt_en] _bnxt_open_nic+0x198/0xa50 [bnxt_en] ? bnxt_hurm_if_change+0x287/0x3d0 [bnxt_en] bnxt_open+0xeb/0x1b0 [bnxt_en] _dev_open+0x12e/0x1f0 _dev_change_flags+0xb0/0x200 dev_change_flags+0x25/0x60 do_setlink+0x463/0x1260 ? sock_def_readable+0x14/0xc0 ? rtnl_getlink+0x4b9/0x590 ? _nla_validate_parse+0x91/0xfa0 rtnl_newlink+0xbac/0xe40 <...> Don't create a variable and dereference the first array member directly since it's used only once in the code. Fixes: ef4ee64 ("bnxt_en: Define BNXT_VNIC_DEFAULT for the default vnic index") Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: NipaLocal <nipa@local>
kuba-moo
pushed a commit
to linux-netdev/testing
that referenced
this pull request
Feb 27, 2024
bnxt_alloc_mem() dereferences ::vnic_info in the variable declaration block, but allocates it much later. As a result, the following crash happens on my setup: BUG: kernel NULL pointer dereference, address: 0000000000000090 fbcon: Taking over console #PF: supervisor write access in kernel mode #PF: error_code (0x0002) - not-present page PGD 12f382067 P4D 0 Oops: 8002 [#1] PREEMPT SMP NOPTI CPU: 47 PID: 2516 Comm: NetworkManager Not tainted 6.8.0-rc5-libeth+ torvalds#49 Hardware name: Intel Corporation M50CYP2SBSTD/M58CYP2SBSTD, BIOS SE5C620.86B.01.01.0088.2305172341 05/17/2023 RIP: 0010:bnxt_alloc_mem+0x1609/0x1910 [bnxt_en] Code: 81 c8 48 83 c8 08 31 c9 e9 d7 fe ff ff c7 44 24 Oc 00 00 00 00 49 89 d5 e9 2d fe ff ff 41 89 c6 e9 88 00 00 00 48 8b 44 24 50 <80> 88 90 00 00 00 Od 8b 43 74 a8 02 75 1e f6 83 14 02 00 00 80 74 RSP: 0018:ff3f25580f3432c8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ff15a5cfc45249e0 RCX: 0000002079777000 RDX: ff15a5dfb9767000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ff15a5dfb9777000 R11: ffffff8000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000020 R15: ff15a5cfce34f540 FS: 000007fb9a160500(0000) GS:ff15a5dfbefc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CRO: 0000000080050033 CR2: 0000000000000090 CR3: 0000000109efc00Z CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DRZ: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x68/0xb0 ? page_fault_oops+0x3a6/0x400 ? exc_page_fault+0x7a/0x1b0 ? asm_exc_page_fault+0x26/8x30 ? bnxt_alloc_mem+0x1609/0x1910 [bnxt_en] ? bnxt_alloc_mem+0x1389/8x1918 [bnxt_en] _bnxt_open_nic+0x198/0xa50 [bnxt_en] ? bnxt_hurm_if_change+0x287/0x3d0 [bnxt_en] bnxt_open+0xeb/0x1b0 [bnxt_en] _dev_open+0x12e/0x1f0 _dev_change_flags+0xb0/0x200 dev_change_flags+0x25/0x60 do_setlink+0x463/0x1260 ? sock_def_readable+0x14/0xc0 ? rtnl_getlink+0x4b9/0x590 ? _nla_validate_parse+0x91/0xfa0 rtnl_newlink+0xbac/0xe40 <...> Don't create a variable and dereference the first array member directly since it's used only once in the code. Fixes: ef4ee64 ("bnxt_en: Define BNXT_VNIC_DEFAULT for the default vnic index") Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: NipaLocal <nipa@local>
kuba-moo
pushed a commit
to linux-netdev/testing
that referenced
this pull request
Feb 27, 2024
bnxt_alloc_mem() dereferences ::vnic_info in the variable declaration block, but allocates it much later. As a result, the following crash happens on my setup: BUG: kernel NULL pointer dereference, address: 0000000000000090 fbcon: Taking over console #PF: supervisor write access in kernel mode #PF: error_code (0x0002) - not-present page PGD 12f382067 P4D 0 Oops: 8002 [#1] PREEMPT SMP NOPTI CPU: 47 PID: 2516 Comm: NetworkManager Not tainted 6.8.0-rc5-libeth+ torvalds#49 Hardware name: Intel Corporation M50CYP2SBSTD/M58CYP2SBSTD, BIOS SE5C620.86B.01.01.0088.2305172341 05/17/2023 RIP: 0010:bnxt_alloc_mem+0x1609/0x1910 [bnxt_en] Code: 81 c8 48 83 c8 08 31 c9 e9 d7 fe ff ff c7 44 24 Oc 00 00 00 00 49 89 d5 e9 2d fe ff ff 41 89 c6 e9 88 00 00 00 48 8b 44 24 50 <80> 88 90 00 00 00 Od 8b 43 74 a8 02 75 1e f6 83 14 02 00 00 80 74 RSP: 0018:ff3f25580f3432c8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ff15a5cfc45249e0 RCX: 0000002079777000 RDX: ff15a5dfb9767000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ff15a5dfb9777000 R11: ffffff8000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000020 R15: ff15a5cfce34f540 FS: 000007fb9a160500(0000) GS:ff15a5dfbefc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CRO: 0000000080050033 CR2: 0000000000000090 CR3: 0000000109efc00Z CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DRZ: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x68/0xb0 ? page_fault_oops+0x3a6/0x400 ? exc_page_fault+0x7a/0x1b0 ? asm_exc_page_fault+0x26/8x30 ? bnxt_alloc_mem+0x1609/0x1910 [bnxt_en] ? bnxt_alloc_mem+0x1389/8x1918 [bnxt_en] _bnxt_open_nic+0x198/0xa50 [bnxt_en] ? bnxt_hurm_if_change+0x287/0x3d0 [bnxt_en] bnxt_open+0xeb/0x1b0 [bnxt_en] _dev_open+0x12e/0x1f0 _dev_change_flags+0xb0/0x200 dev_change_flags+0x25/0x60 do_setlink+0x463/0x1260 ? sock_def_readable+0x14/0xc0 ? rtnl_getlink+0x4b9/0x590 ? _nla_validate_parse+0x91/0xfa0 rtnl_newlink+0xbac/0xe40 <...> Don't create a variable and dereference the first array member directly since it's used only once in the code. Fixes: ef4ee64 ("bnxt_en: Define BNXT_VNIC_DEFAULT for the default vnic index") Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: NipaLocal <nipa@local>
kuba-moo
pushed a commit
to linux-netdev/testing
that referenced
this pull request
Feb 27, 2024
bnxt_alloc_mem() dereferences ::vnic_info in the variable declaration block, but allocates it much later. As a result, the following crash happens on my setup: BUG: kernel NULL pointer dereference, address: 0000000000000090 fbcon: Taking over console #PF: supervisor write access in kernel mode #PF: error_code (0x0002) - not-present page PGD 12f382067 P4D 0 Oops: 8002 [#1] PREEMPT SMP NOPTI CPU: 47 PID: 2516 Comm: NetworkManager Not tainted 6.8.0-rc5-libeth+ torvalds#49 Hardware name: Intel Corporation M50CYP2SBSTD/M58CYP2SBSTD, BIOS SE5C620.86B.01.01.0088.2305172341 05/17/2023 RIP: 0010:bnxt_alloc_mem+0x1609/0x1910 [bnxt_en] Code: 81 c8 48 83 c8 08 31 c9 e9 d7 fe ff ff c7 44 24 Oc 00 00 00 00 49 89 d5 e9 2d fe ff ff 41 89 c6 e9 88 00 00 00 48 8b 44 24 50 <80> 88 90 00 00 00 Od 8b 43 74 a8 02 75 1e f6 83 14 02 00 00 80 74 RSP: 0018:ff3f25580f3432c8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ff15a5cfc45249e0 RCX: 0000002079777000 RDX: ff15a5dfb9767000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ff15a5dfb9777000 R11: ffffff8000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000020 R15: ff15a5cfce34f540 FS: 000007fb9a160500(0000) GS:ff15a5dfbefc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CRO: 0000000080050033 CR2: 0000000000000090 CR3: 0000000109efc00Z CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DRZ: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x68/0xb0 ? page_fault_oops+0x3a6/0x400 ? exc_page_fault+0x7a/0x1b0 ? asm_exc_page_fault+0x26/8x30 ? bnxt_alloc_mem+0x1609/0x1910 [bnxt_en] ? bnxt_alloc_mem+0x1389/8x1918 [bnxt_en] _bnxt_open_nic+0x198/0xa50 [bnxt_en] ? bnxt_hurm_if_change+0x287/0x3d0 [bnxt_en] bnxt_open+0xeb/0x1b0 [bnxt_en] _dev_open+0x12e/0x1f0 _dev_change_flags+0xb0/0x200 dev_change_flags+0x25/0x60 do_setlink+0x463/0x1260 ? sock_def_readable+0x14/0xc0 ? rtnl_getlink+0x4b9/0x590 ? _nla_validate_parse+0x91/0xfa0 rtnl_newlink+0xbac/0xe40 <...> Don't create a variable and dereference the first array member directly since it's used only once in the code. Fixes: ef4ee64 ("bnxt_en: Define BNXT_VNIC_DEFAULT for the default vnic index") Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: NipaLocal <nipa@local>
kuba-moo
pushed a commit
to linux-netdev/testing
that referenced
this pull request
Feb 27, 2024
bnxt_alloc_mem() dereferences ::vnic_info in the variable declaration block, but allocates it much later. As a result, the following crash happens on my setup: BUG: kernel NULL pointer dereference, address: 0000000000000090 fbcon: Taking over console #PF: supervisor write access in kernel mode #PF: error_code (0x0002) - not-present page PGD 12f382067 P4D 0 Oops: 8002 [#1] PREEMPT SMP NOPTI CPU: 47 PID: 2516 Comm: NetworkManager Not tainted 6.8.0-rc5-libeth+ torvalds#49 Hardware name: Intel Corporation M50CYP2SBSTD/M58CYP2SBSTD, BIOS SE5C620.86B.01.01.0088.2305172341 05/17/2023 RIP: 0010:bnxt_alloc_mem+0x1609/0x1910 [bnxt_en] Code: 81 c8 48 83 c8 08 31 c9 e9 d7 fe ff ff c7 44 24 Oc 00 00 00 00 49 89 d5 e9 2d fe ff ff 41 89 c6 e9 88 00 00 00 48 8b 44 24 50 <80> 88 90 00 00 00 Od 8b 43 74 a8 02 75 1e f6 83 14 02 00 00 80 74 RSP: 0018:ff3f25580f3432c8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ff15a5cfc45249e0 RCX: 0000002079777000 RDX: ff15a5dfb9767000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ff15a5dfb9777000 R11: ffffff8000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000020 R15: ff15a5cfce34f540 FS: 000007fb9a160500(0000) GS:ff15a5dfbefc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CRO: 0000000080050033 CR2: 0000000000000090 CR3: 0000000109efc00Z CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DRZ: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x68/0xb0 ? page_fault_oops+0x3a6/0x400 ? exc_page_fault+0x7a/0x1b0 ? asm_exc_page_fault+0x26/8x30 ? bnxt_alloc_mem+0x1609/0x1910 [bnxt_en] ? bnxt_alloc_mem+0x1389/8x1918 [bnxt_en] _bnxt_open_nic+0x198/0xa50 [bnxt_en] ? bnxt_hurm_if_change+0x287/0x3d0 [bnxt_en] bnxt_open+0xeb/0x1b0 [bnxt_en] _dev_open+0x12e/0x1f0 _dev_change_flags+0xb0/0x200 dev_change_flags+0x25/0x60 do_setlink+0x463/0x1260 ? sock_def_readable+0x14/0xc0 ? rtnl_getlink+0x4b9/0x590 ? _nla_validate_parse+0x91/0xfa0 rtnl_newlink+0xbac/0xe40 <...> Don't create a variable and dereference the first array member directly since it's used only once in the code. Fixes: ef4ee64 ("bnxt_en: Define BNXT_VNIC_DEFAULT for the default vnic index") Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: NipaLocal <nipa@local>
alobakin
added a commit
to alobakin/linux
that referenced
this pull request
Feb 27, 2024
bnxt_alloc_mem() dereferences ::vnic_info in the variable declaration block, but allocates it much later. As a result, the following crash happens on my setup: BUG: kernel NULL pointer dereference, address: 0000000000000090 fbcon: Taking over console #PF: supervisor write access in kernel mode #PF: error_code (0x0002) - not-present page PGD 12f382067 P4D 0 Oops: 8002 [#1] PREEMPT SMP NOPTI CPU: 47 PID: 2516 Comm: NetworkManager Not tainted 6.8.0-rc5-libeth+ torvalds#49 Hardware name: Intel Corporation M50CYP2SBSTD/M58CYP2SBSTD, BIOS SE5C620.86B.01.01.0088.2305172341 05/17/2023 RIP: 0010:bnxt_alloc_mem+0x1609/0x1910 [bnxt_en] Code: 81 c8 48 83 c8 08 31 c9 e9 d7 fe ff ff c7 44 24 Oc 00 00 00 00 49 89 d5 e9 2d fe ff ff 41 89 c6 e9 88 00 00 00 48 8b 44 24 50 <80> 88 90 00 00 00 Od 8b 43 74 a8 02 75 1e f6 83 14 02 00 00 80 74 RSP: 0018:ff3f25580f3432c8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ff15a5cfc45249e0 RCX: 0000002079777000 RDX: ff15a5dfb9767000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ff15a5dfb9777000 R11: ffffff8000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000020 R15: ff15a5cfce34f540 FS: 000007fb9a160500(0000) GS:ff15a5dfbefc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CRO: 0000000080050033 CR2: 0000000000000090 CR3: 0000000109efc00Z CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DRZ: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x68/0xb0 ? page_fault_oops+0x3a6/0x400 ? exc_page_fault+0x7a/0x1b0 ? asm_exc_page_fault+0x26/8x30 ? bnxt_alloc_mem+0x1609/0x1910 [bnxt_en] ? bnxt_alloc_mem+0x1389/8x1918 [bnxt_en] _bnxt_open_nic+0x198/0xa50 [bnxt_en] ? bnxt_hurm_if_change+0x287/0x3d0 [bnxt_en] bnxt_open+0xeb/0x1b0 [bnxt_en] _dev_open+0x12e/0x1f0 _dev_change_flags+0xb0/0x200 dev_change_flags+0x25/0x60 do_setlink+0x463/0x1260 ? sock_def_readable+0x14/0xc0 ? rtnl_getlink+0x4b9/0x590 ? _nla_validate_parse+0x91/0xfa0 rtnl_newlink+0xbac/0xe40 <...> Don't create a variable and dereference the first array member directly since it's used only once in the code. Fixes: ef4ee64 ("bnxt_en: Define BNXT_VNIC_DEFAULT for the default vnic index") Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
kuba-moo
pushed a commit
to linux-netdev/testing
that referenced
this pull request
Feb 27, 2024
bnxt_alloc_mem() dereferences ::vnic_info in the variable declaration block, but allocates it much later. As a result, the following crash happens on my setup: BUG: kernel NULL pointer dereference, address: 0000000000000090 fbcon: Taking over console #PF: supervisor write access in kernel mode #PF: error_code (0x0002) - not-present page PGD 12f382067 P4D 0 Oops: 8002 [#1] PREEMPT SMP NOPTI CPU: 47 PID: 2516 Comm: NetworkManager Not tainted 6.8.0-rc5-libeth+ torvalds#49 Hardware name: Intel Corporation M50CYP2SBSTD/M58CYP2SBSTD, BIOS SE5C620.86B.01.01.0088.2305172341 05/17/2023 RIP: 0010:bnxt_alloc_mem+0x1609/0x1910 [bnxt_en] Code: 81 c8 48 83 c8 08 31 c9 e9 d7 fe ff ff c7 44 24 Oc 00 00 00 00 49 89 d5 e9 2d fe ff ff 41 89 c6 e9 88 00 00 00 48 8b 44 24 50 <80> 88 90 00 00 00 Od 8b 43 74 a8 02 75 1e f6 83 14 02 00 00 80 74 RSP: 0018:ff3f25580f3432c8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ff15a5cfc45249e0 RCX: 0000002079777000 RDX: ff15a5dfb9767000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ff15a5dfb9777000 R11: ffffff8000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000020 R15: ff15a5cfce34f540 FS: 000007fb9a160500(0000) GS:ff15a5dfbefc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CRO: 0000000080050033 CR2: 0000000000000090 CR3: 0000000109efc00Z CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DRZ: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x68/0xb0 ? page_fault_oops+0x3a6/0x400 ? exc_page_fault+0x7a/0x1b0 ? asm_exc_page_fault+0x26/8x30 ? bnxt_alloc_mem+0x1609/0x1910 [bnxt_en] ? bnxt_alloc_mem+0x1389/8x1918 [bnxt_en] _bnxt_open_nic+0x198/0xa50 [bnxt_en] ? bnxt_hurm_if_change+0x287/0x3d0 [bnxt_en] bnxt_open+0xeb/0x1b0 [bnxt_en] _dev_open+0x12e/0x1f0 _dev_change_flags+0xb0/0x200 dev_change_flags+0x25/0x60 do_setlink+0x463/0x1260 ? sock_def_readable+0x14/0xc0 ? rtnl_getlink+0x4b9/0x590 ? _nla_validate_parse+0x91/0xfa0 rtnl_newlink+0xbac/0xe40 <...> Don't create a variable and dereference the first array member directly since it's used only once in the code. Fixes: ef4ee64 ("bnxt_en: Define BNXT_VNIC_DEFAULT for the default vnic index") Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: NipaLocal <nipa@local>
kuba-moo
pushed a commit
to linux-netdev/testing
that referenced
this pull request
Feb 27, 2024
bnxt_alloc_mem() dereferences ::vnic_info in the variable declaration block, but allocates it much later. As a result, the following crash happens on my setup: BUG: kernel NULL pointer dereference, address: 0000000000000090 fbcon: Taking over console #PF: supervisor write access in kernel mode #PF: error_code (0x0002) - not-present page PGD 12f382067 P4D 0 Oops: 8002 [#1] PREEMPT SMP NOPTI CPU: 47 PID: 2516 Comm: NetworkManager Not tainted 6.8.0-rc5-libeth+ torvalds#49 Hardware name: Intel Corporation M50CYP2SBSTD/M58CYP2SBSTD, BIOS SE5C620.86B.01.01.0088.2305172341 05/17/2023 RIP: 0010:bnxt_alloc_mem+0x1609/0x1910 [bnxt_en] Code: 81 c8 48 83 c8 08 31 c9 e9 d7 fe ff ff c7 44 24 Oc 00 00 00 00 49 89 d5 e9 2d fe ff ff 41 89 c6 e9 88 00 00 00 48 8b 44 24 50 <80> 88 90 00 00 00 Od 8b 43 74 a8 02 75 1e f6 83 14 02 00 00 80 74 RSP: 0018:ff3f25580f3432c8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ff15a5cfc45249e0 RCX: 0000002079777000 RDX: ff15a5dfb9767000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ff15a5dfb9777000 R11: ffffff8000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000020 R15: ff15a5cfce34f540 FS: 000007fb9a160500(0000) GS:ff15a5dfbefc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CRO: 0000000080050033 CR2: 0000000000000090 CR3: 0000000109efc00Z CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DRZ: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x68/0xb0 ? page_fault_oops+0x3a6/0x400 ? exc_page_fault+0x7a/0x1b0 ? asm_exc_page_fault+0x26/8x30 ? bnxt_alloc_mem+0x1609/0x1910 [bnxt_en] ? bnxt_alloc_mem+0x1389/8x1918 [bnxt_en] _bnxt_open_nic+0x198/0xa50 [bnxt_en] ? bnxt_hurm_if_change+0x287/0x3d0 [bnxt_en] bnxt_open+0xeb/0x1b0 [bnxt_en] _dev_open+0x12e/0x1f0 _dev_change_flags+0xb0/0x200 dev_change_flags+0x25/0x60 do_setlink+0x463/0x1260 ? sock_def_readable+0x14/0xc0 ? rtnl_getlink+0x4b9/0x590 ? _nla_validate_parse+0x91/0xfa0 rtnl_newlink+0xbac/0xe40 <...> Don't create a variable and dereference the first array member directly since it's used only once in the code. Fixes: ef4ee64 ("bnxt_en: Define BNXT_VNIC_DEFAULT for the default vnic index") Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: NipaLocal <nipa@local>
kuba-moo
pushed a commit
to linux-netdev/testing
that referenced
this pull request
Feb 27, 2024
bnxt_alloc_mem() dereferences ::vnic_info in the variable declaration block, but allocates it much later. As a result, the following crash happens on my setup: BUG: kernel NULL pointer dereference, address: 0000000000000090 fbcon: Taking over console #PF: supervisor write access in kernel mode #PF: error_code (0x0002) - not-present page PGD 12f382067 P4D 0 Oops: 8002 [#1] PREEMPT SMP NOPTI CPU: 47 PID: 2516 Comm: NetworkManager Not tainted 6.8.0-rc5-libeth+ torvalds#49 Hardware name: Intel Corporation M50CYP2SBSTD/M58CYP2SBSTD, BIOS SE5C620.86B.01.01.0088.2305172341 05/17/2023 RIP: 0010:bnxt_alloc_mem+0x1609/0x1910 [bnxt_en] Code: 81 c8 48 83 c8 08 31 c9 e9 d7 fe ff ff c7 44 24 Oc 00 00 00 00 49 89 d5 e9 2d fe ff ff 41 89 c6 e9 88 00 00 00 48 8b 44 24 50 <80> 88 90 00 00 00 Od 8b 43 74 a8 02 75 1e f6 83 14 02 00 00 80 74 RSP: 0018:ff3f25580f3432c8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ff15a5cfc45249e0 RCX: 0000002079777000 RDX: ff15a5dfb9767000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ff15a5dfb9777000 R11: ffffff8000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000020 R15: ff15a5cfce34f540 FS: 000007fb9a160500(0000) GS:ff15a5dfbefc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CRO: 0000000080050033 CR2: 0000000000000090 CR3: 0000000109efc00Z CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DRZ: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x68/0xb0 ? page_fault_oops+0x3a6/0x400 ? exc_page_fault+0x7a/0x1b0 ? asm_exc_page_fault+0x26/8x30 ? bnxt_alloc_mem+0x1609/0x1910 [bnxt_en] ? bnxt_alloc_mem+0x1389/8x1918 [bnxt_en] _bnxt_open_nic+0x198/0xa50 [bnxt_en] ? bnxt_hurm_if_change+0x287/0x3d0 [bnxt_en] bnxt_open+0xeb/0x1b0 [bnxt_en] _dev_open+0x12e/0x1f0 _dev_change_flags+0xb0/0x200 dev_change_flags+0x25/0x60 do_setlink+0x463/0x1260 ? sock_def_readable+0x14/0xc0 ? rtnl_getlink+0x4b9/0x590 ? _nla_validate_parse+0x91/0xfa0 rtnl_newlink+0xbac/0xe40 <...> Don't create a variable and dereference the first array member directly since it's used only once in the code. Fixes: ef4ee64 ("bnxt_en: Define BNXT_VNIC_DEFAULT for the default vnic index") Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240226144911.1297336-1-aleksander.lobakin@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ioworker0
pushed a commit
to ioworker0/linux
that referenced
this pull request
Apr 18, 2024
If stack_depot_save_flags() allocates memory it always drops __GFP_NOLOCKDEP flag. So when KASAN tries to track __GFP_NOLOCKDEP allocation we may end up with lockdep splat like bellow: ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc3+ torvalds#49 Not tainted ------------------------------------------------------ kswapd0/149 is trying to acquire lock: ffff88811346a920 (&xfs_nondir_ilock_class){++++}-{4:4}, at: xfs_reclaim_inode+0x3ac/0x590 [xfs] but task is already holding lock: ffffffff8bb33100 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x5d9/0xad0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: __lock_acquire+0x7da/0x1030 lock_acquire+0x15d/0x400 fs_reclaim_acquire+0xb5/0x100 prepare_alloc_pages.constprop.0+0xc5/0x230 __alloc_pages+0x12a/0x3f0 alloc_pages_mpol+0x175/0x340 stack_depot_save_flags+0x4c5/0x510 kasan_save_stack+0x30/0x40 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x83/0x90 kmem_cache_alloc+0x15e/0x4a0 __alloc_object+0x35/0x370 __create_object+0x22/0x90 __kmalloc_node_track_caller+0x477/0x5b0 krealloc+0x5f/0x110 xfs_iext_insert_raw+0x4b2/0x6e0 [xfs] xfs_iext_insert+0x2e/0x130 [xfs] xfs_iread_bmbt_block+0x1a9/0x4d0 [xfs] xfs_btree_visit_block+0xfb/0x290 [xfs] xfs_btree_visit_blocks+0x215/0x2c0 [xfs] xfs_iread_extents+0x1a2/0x2e0 [xfs] xfs_buffered_write_iomap_begin+0x376/0x10a0 [xfs] iomap_iter+0x1d1/0x2d0 iomap_file_buffered_write+0x120/0x1a0 xfs_file_buffered_write+0x128/0x4b0 [xfs] vfs_write+0x675/0x890 ksys_write+0xc3/0x160 do_syscall_64+0x94/0x170 entry_SYSCALL_64_after_hwframe+0x71/0x79 Always preserve __GFP_NOLOCKDEP to fix this. Link: https://lkml.kernel.org/r/20240418141133.22950-1-ryabinin.a.a@gmail.com Fixes: cd11016 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Reported-by: Xiubo Li <xiubli@redhat.com> Closes: https://lore.kernel.org/all/a0caa289-ca02-48eb-9bf2-d86fd47b71f4@redhat.com/ Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Closes: https://lore.kernel.org/all/f9ff999a-e170-b66b-7caf-293f2b147ac2@opensource.wdc.com/ Suggested-by: Dave Chinner <david@fromorbit.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
Apr 23, 2024
If stack_depot_save_flags() allocates memory it always drops __GFP_NOLOCKDEP flag. So when KASAN tries to track __GFP_NOLOCKDEP allocation we may end up with lockdep splat like bellow: ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc3+ torvalds#49 Not tainted ------------------------------------------------------ kswapd0/149 is trying to acquire lock: ffff88811346a920 (&xfs_nondir_ilock_class){++++}-{4:4}, at: xfs_reclaim_inode+0x3ac/0x590 [xfs] but task is already holding lock: ffffffff8bb33100 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x5d9/0xad0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: __lock_acquire+0x7da/0x1030 lock_acquire+0x15d/0x400 fs_reclaim_acquire+0xb5/0x100 prepare_alloc_pages.constprop.0+0xc5/0x230 __alloc_pages+0x12a/0x3f0 alloc_pages_mpol+0x175/0x340 stack_depot_save_flags+0x4c5/0x510 kasan_save_stack+0x30/0x40 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x83/0x90 kmem_cache_alloc+0x15e/0x4a0 __alloc_object+0x35/0x370 __create_object+0x22/0x90 __kmalloc_node_track_caller+0x477/0x5b0 krealloc+0x5f/0x110 xfs_iext_insert_raw+0x4b2/0x6e0 [xfs] xfs_iext_insert+0x2e/0x130 [xfs] xfs_iread_bmbt_block+0x1a9/0x4d0 [xfs] xfs_btree_visit_block+0xfb/0x290 [xfs] xfs_btree_visit_blocks+0x215/0x2c0 [xfs] xfs_iread_extents+0x1a2/0x2e0 [xfs] xfs_buffered_write_iomap_begin+0x376/0x10a0 [xfs] iomap_iter+0x1d1/0x2d0 iomap_file_buffered_write+0x120/0x1a0 xfs_file_buffered_write+0x128/0x4b0 [xfs] vfs_write+0x675/0x890 ksys_write+0xc3/0x160 do_syscall_64+0x94/0x170 entry_SYSCALL_64_after_hwframe+0x71/0x79 Always preserve __GFP_NOLOCKDEP to fix this. Link: https://lkml.kernel.org/r/20240418141133.22950-1-ryabinin.a.a@gmail.com Fixes: cd11016 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Reported-by: Xiubo Li <xiubli@redhat.com> Closes: https://lore.kernel.org/all/a0caa289-ca02-48eb-9bf2-d86fd47b71f4@redhat.com/ Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Closes: https://lore.kernel.org/all/f9ff999a-e170-b66b-7caf-293f2b147ac2@opensource.wdc.com/ Suggested-by: Dave Chinner <david@fromorbit.com> Tested-by: Xiubo Li <xiubli@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
Apr 25, 2024
If stack_depot_save_flags() allocates memory it always drops __GFP_NOLOCKDEP flag. So when KASAN tries to track __GFP_NOLOCKDEP allocation we may end up with lockdep splat like bellow: ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc3+ torvalds#49 Not tainted ------------------------------------------------------ kswapd0/149 is trying to acquire lock: ffff88811346a920 (&xfs_nondir_ilock_class){++++}-{4:4}, at: xfs_reclaim_inode+0x3ac/0x590 [xfs] but task is already holding lock: ffffffff8bb33100 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x5d9/0xad0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: __lock_acquire+0x7da/0x1030 lock_acquire+0x15d/0x400 fs_reclaim_acquire+0xb5/0x100 prepare_alloc_pages.constprop.0+0xc5/0x230 __alloc_pages+0x12a/0x3f0 alloc_pages_mpol+0x175/0x340 stack_depot_save_flags+0x4c5/0x510 kasan_save_stack+0x30/0x40 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x83/0x90 kmem_cache_alloc+0x15e/0x4a0 __alloc_object+0x35/0x370 __create_object+0x22/0x90 __kmalloc_node_track_caller+0x477/0x5b0 krealloc+0x5f/0x110 xfs_iext_insert_raw+0x4b2/0x6e0 [xfs] xfs_iext_insert+0x2e/0x130 [xfs] xfs_iread_bmbt_block+0x1a9/0x4d0 [xfs] xfs_btree_visit_block+0xfb/0x290 [xfs] xfs_btree_visit_blocks+0x215/0x2c0 [xfs] xfs_iread_extents+0x1a2/0x2e0 [xfs] xfs_buffered_write_iomap_begin+0x376/0x10a0 [xfs] iomap_iter+0x1d1/0x2d0 iomap_file_buffered_write+0x120/0x1a0 xfs_file_buffered_write+0x128/0x4b0 [xfs] vfs_write+0x675/0x890 ksys_write+0xc3/0x160 do_syscall_64+0x94/0x170 entry_SYSCALL_64_after_hwframe+0x71/0x79 Always preserve __GFP_NOLOCKDEP to fix this. Link: https://lkml.kernel.org/r/20240418141133.22950-1-ryabinin.a.a@gmail.com Fixes: cd11016 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Reported-by: Xiubo Li <xiubli@redhat.com> Closes: https://lore.kernel.org/all/a0caa289-ca02-48eb-9bf2-d86fd47b71f4@redhat.com/ Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Closes: https://lore.kernel.org/all/f9ff999a-e170-b66b-7caf-293f2b147ac2@opensource.wdc.com/ Suggested-by: Dave Chinner <david@fromorbit.com> Tested-by: Xiubo Li <xiubli@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kaz205
pushed a commit
to Kaz205/linux
that referenced
this pull request
Apr 29, 2024
commit 6fe6046 upstream. If stack_depot_save_flags() allocates memory it always drops __GFP_NOLOCKDEP flag. So when KASAN tries to track __GFP_NOLOCKDEP allocation we may end up with lockdep splat like bellow: ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc3+ torvalds#49 Not tainted ------------------------------------------------------ kswapd0/149 is trying to acquire lock: ffff88811346a920 (&xfs_nondir_ilock_class){++++}-{4:4}, at: xfs_reclaim_inode+0x3ac/0x590 [xfs] but task is already holding lock: ffffffff8bb33100 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x5d9/0xad0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: __lock_acquire+0x7da/0x1030 lock_acquire+0x15d/0x400 fs_reclaim_acquire+0xb5/0x100 prepare_alloc_pages.constprop.0+0xc5/0x230 __alloc_pages+0x12a/0x3f0 alloc_pages_mpol+0x175/0x340 stack_depot_save_flags+0x4c5/0x510 kasan_save_stack+0x30/0x40 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x83/0x90 kmem_cache_alloc+0x15e/0x4a0 __alloc_object+0x35/0x370 __create_object+0x22/0x90 __kmalloc_node_track_caller+0x477/0x5b0 krealloc+0x5f/0x110 xfs_iext_insert_raw+0x4b2/0x6e0 [xfs] xfs_iext_insert+0x2e/0x130 [xfs] xfs_iread_bmbt_block+0x1a9/0x4d0 [xfs] xfs_btree_visit_block+0xfb/0x290 [xfs] xfs_btree_visit_blocks+0x215/0x2c0 [xfs] xfs_iread_extents+0x1a2/0x2e0 [xfs] xfs_buffered_write_iomap_begin+0x376/0x10a0 [xfs] iomap_iter+0x1d1/0x2d0 iomap_file_buffered_write+0x120/0x1a0 xfs_file_buffered_write+0x128/0x4b0 [xfs] vfs_write+0x675/0x890 ksys_write+0xc3/0x160 do_syscall_64+0x94/0x170 entry_SYSCALL_64_after_hwframe+0x71/0x79 Always preserve __GFP_NOLOCKDEP to fix this. Link: https://lkml.kernel.org/r/20240418141133.22950-1-ryabinin.a.a@gmail.com Fixes: cd11016 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Reported-by: Xiubo Li <xiubli@redhat.com> Closes: https://lore.kernel.org/all/a0caa289-ca02-48eb-9bf2-d86fd47b71f4@redhat.com/ Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Closes: https://lore.kernel.org/all/f9ff999a-e170-b66b-7caf-293f2b147ac2@opensource.wdc.com/ Suggested-by: Dave Chinner <david@fromorbit.com> Tested-by: Xiubo Li <xiubli@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mj22226
pushed a commit
to mj22226/linux
that referenced
this pull request
Apr 30, 2024
commit 6fe6046 upstream. If stack_depot_save_flags() allocates memory it always drops __GFP_NOLOCKDEP flag. So when KASAN tries to track __GFP_NOLOCKDEP allocation we may end up with lockdep splat like bellow: ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc3+ torvalds#49 Not tainted ------------------------------------------------------ kswapd0/149 is trying to acquire lock: ffff88811346a920 (&xfs_nondir_ilock_class){++++}-{4:4}, at: xfs_reclaim_inode+0x3ac/0x590 [xfs] but task is already holding lock: ffffffff8bb33100 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x5d9/0xad0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: __lock_acquire+0x7da/0x1030 lock_acquire+0x15d/0x400 fs_reclaim_acquire+0xb5/0x100 prepare_alloc_pages.constprop.0+0xc5/0x230 __alloc_pages+0x12a/0x3f0 alloc_pages_mpol+0x175/0x340 stack_depot_save_flags+0x4c5/0x510 kasan_save_stack+0x30/0x40 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x83/0x90 kmem_cache_alloc+0x15e/0x4a0 __alloc_object+0x35/0x370 __create_object+0x22/0x90 __kmalloc_node_track_caller+0x477/0x5b0 krealloc+0x5f/0x110 xfs_iext_insert_raw+0x4b2/0x6e0 [xfs] xfs_iext_insert+0x2e/0x130 [xfs] xfs_iread_bmbt_block+0x1a9/0x4d0 [xfs] xfs_btree_visit_block+0xfb/0x290 [xfs] xfs_btree_visit_blocks+0x215/0x2c0 [xfs] xfs_iread_extents+0x1a2/0x2e0 [xfs] xfs_buffered_write_iomap_begin+0x376/0x10a0 [xfs] iomap_iter+0x1d1/0x2d0 iomap_file_buffered_write+0x120/0x1a0 xfs_file_buffered_write+0x128/0x4b0 [xfs] vfs_write+0x675/0x890 ksys_write+0xc3/0x160 do_syscall_64+0x94/0x170 entry_SYSCALL_64_after_hwframe+0x71/0x79 Always preserve __GFP_NOLOCKDEP to fix this. Link: https://lkml.kernel.org/r/20240418141133.22950-1-ryabinin.a.a@gmail.com Fixes: cd11016 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Reported-by: Xiubo Li <xiubli@redhat.com> Closes: https://lore.kernel.org/all/a0caa289-ca02-48eb-9bf2-d86fd47b71f4@redhat.com/ Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Closes: https://lore.kernel.org/all/f9ff999a-e170-b66b-7caf-293f2b147ac2@opensource.wdc.com/ Suggested-by: Dave Chinner <david@fromorbit.com> Tested-by: Xiubo Li <xiubli@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mj22226
pushed a commit
to mj22226/linux
that referenced
this pull request
Apr 30, 2024
commit 6fe6046 upstream. If stack_depot_save_flags() allocates memory it always drops __GFP_NOLOCKDEP flag. So when KASAN tries to track __GFP_NOLOCKDEP allocation we may end up with lockdep splat like bellow: ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc3+ torvalds#49 Not tainted ------------------------------------------------------ kswapd0/149 is trying to acquire lock: ffff88811346a920 (&xfs_nondir_ilock_class){++++}-{4:4}, at: xfs_reclaim_inode+0x3ac/0x590 [xfs] but task is already holding lock: ffffffff8bb33100 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x5d9/0xad0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: __lock_acquire+0x7da/0x1030 lock_acquire+0x15d/0x400 fs_reclaim_acquire+0xb5/0x100 prepare_alloc_pages.constprop.0+0xc5/0x230 __alloc_pages+0x12a/0x3f0 alloc_pages_mpol+0x175/0x340 stack_depot_save_flags+0x4c5/0x510 kasan_save_stack+0x30/0x40 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x83/0x90 kmem_cache_alloc+0x15e/0x4a0 __alloc_object+0x35/0x370 __create_object+0x22/0x90 __kmalloc_node_track_caller+0x477/0x5b0 krealloc+0x5f/0x110 xfs_iext_insert_raw+0x4b2/0x6e0 [xfs] xfs_iext_insert+0x2e/0x130 [xfs] xfs_iread_bmbt_block+0x1a9/0x4d0 [xfs] xfs_btree_visit_block+0xfb/0x290 [xfs] xfs_btree_visit_blocks+0x215/0x2c0 [xfs] xfs_iread_extents+0x1a2/0x2e0 [xfs] xfs_buffered_write_iomap_begin+0x376/0x10a0 [xfs] iomap_iter+0x1d1/0x2d0 iomap_file_buffered_write+0x120/0x1a0 xfs_file_buffered_write+0x128/0x4b0 [xfs] vfs_write+0x675/0x890 ksys_write+0xc3/0x160 do_syscall_64+0x94/0x170 entry_SYSCALL_64_after_hwframe+0x71/0x79 Always preserve __GFP_NOLOCKDEP to fix this. Link: https://lkml.kernel.org/r/20240418141133.22950-1-ryabinin.a.a@gmail.com Fixes: cd11016 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Reported-by: Xiubo Li <xiubli@redhat.com> Closes: https://lore.kernel.org/all/a0caa289-ca02-48eb-9bf2-d86fd47b71f4@redhat.com/ Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Closes: https://lore.kernel.org/all/f9ff999a-e170-b66b-7caf-293f2b147ac2@opensource.wdc.com/ Suggested-by: Dave Chinner <david@fromorbit.com> Tested-by: Xiubo Li <xiubli@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kaz205
pushed a commit
to Kaz205/linux
that referenced
this pull request
May 1, 2024
commit 6fe6046 upstream. If stack_depot_save_flags() allocates memory it always drops __GFP_NOLOCKDEP flag. So when KASAN tries to track __GFP_NOLOCKDEP allocation we may end up with lockdep splat like bellow: ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc3+ torvalds#49 Not tainted ------------------------------------------------------ kswapd0/149 is trying to acquire lock: ffff88811346a920 (&xfs_nondir_ilock_class){++++}-{4:4}, at: xfs_reclaim_inode+0x3ac/0x590 [xfs] but task is already holding lock: ffffffff8bb33100 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x5d9/0xad0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: __lock_acquire+0x7da/0x1030 lock_acquire+0x15d/0x400 fs_reclaim_acquire+0xb5/0x100 prepare_alloc_pages.constprop.0+0xc5/0x230 __alloc_pages+0x12a/0x3f0 alloc_pages_mpol+0x175/0x340 stack_depot_save_flags+0x4c5/0x510 kasan_save_stack+0x30/0x40 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x83/0x90 kmem_cache_alloc+0x15e/0x4a0 __alloc_object+0x35/0x370 __create_object+0x22/0x90 __kmalloc_node_track_caller+0x477/0x5b0 krealloc+0x5f/0x110 xfs_iext_insert_raw+0x4b2/0x6e0 [xfs] xfs_iext_insert+0x2e/0x130 [xfs] xfs_iread_bmbt_block+0x1a9/0x4d0 [xfs] xfs_btree_visit_block+0xfb/0x290 [xfs] xfs_btree_visit_blocks+0x215/0x2c0 [xfs] xfs_iread_extents+0x1a2/0x2e0 [xfs] xfs_buffered_write_iomap_begin+0x376/0x10a0 [xfs] iomap_iter+0x1d1/0x2d0 iomap_file_buffered_write+0x120/0x1a0 xfs_file_buffered_write+0x128/0x4b0 [xfs] vfs_write+0x675/0x890 ksys_write+0xc3/0x160 do_syscall_64+0x94/0x170 entry_SYSCALL_64_after_hwframe+0x71/0x79 Always preserve __GFP_NOLOCKDEP to fix this. Link: https://lkml.kernel.org/r/20240418141133.22950-1-ryabinin.a.a@gmail.com Fixes: cd11016 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Reported-by: Xiubo Li <xiubli@redhat.com> Closes: https://lore.kernel.org/all/a0caa289-ca02-48eb-9bf2-d86fd47b71f4@redhat.com/ Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Closes: https://lore.kernel.org/all/f9ff999a-e170-b66b-7caf-293f2b147ac2@opensource.wdc.com/ Suggested-by: Dave Chinner <david@fromorbit.com> Tested-by: Xiubo Li <xiubli@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1054009064
pushed a commit
to 1054009064/linux
that referenced
this pull request
May 2, 2024
commit 6fe6046 upstream. If stack_depot_save_flags() allocates memory it always drops __GFP_NOLOCKDEP flag. So when KASAN tries to track __GFP_NOLOCKDEP allocation we may end up with lockdep splat like bellow: ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc3+ torvalds#49 Not tainted ------------------------------------------------------ kswapd0/149 is trying to acquire lock: ffff88811346a920 (&xfs_nondir_ilock_class){++++}-{4:4}, at: xfs_reclaim_inode+0x3ac/0x590 [xfs] but task is already holding lock: ffffffff8bb33100 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x5d9/0xad0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: __lock_acquire+0x7da/0x1030 lock_acquire+0x15d/0x400 fs_reclaim_acquire+0xb5/0x100 prepare_alloc_pages.constprop.0+0xc5/0x230 __alloc_pages+0x12a/0x3f0 alloc_pages_mpol+0x175/0x340 stack_depot_save_flags+0x4c5/0x510 kasan_save_stack+0x30/0x40 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x83/0x90 kmem_cache_alloc+0x15e/0x4a0 __alloc_object+0x35/0x370 __create_object+0x22/0x90 __kmalloc_node_track_caller+0x477/0x5b0 krealloc+0x5f/0x110 xfs_iext_insert_raw+0x4b2/0x6e0 [xfs] xfs_iext_insert+0x2e/0x130 [xfs] xfs_iread_bmbt_block+0x1a9/0x4d0 [xfs] xfs_btree_visit_block+0xfb/0x290 [xfs] xfs_btree_visit_blocks+0x215/0x2c0 [xfs] xfs_iread_extents+0x1a2/0x2e0 [xfs] xfs_buffered_write_iomap_begin+0x376/0x10a0 [xfs] iomap_iter+0x1d1/0x2d0 iomap_file_buffered_write+0x120/0x1a0 xfs_file_buffered_write+0x128/0x4b0 [xfs] vfs_write+0x675/0x890 ksys_write+0xc3/0x160 do_syscall_64+0x94/0x170 entry_SYSCALL_64_after_hwframe+0x71/0x79 Always preserve __GFP_NOLOCKDEP to fix this. Link: https://lkml.kernel.org/r/20240418141133.22950-1-ryabinin.a.a@gmail.com Fixes: cd11016 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Reported-by: Xiubo Li <xiubli@redhat.com> Closes: https://lore.kernel.org/all/a0caa289-ca02-48eb-9bf2-d86fd47b71f4@redhat.com/ Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Closes: https://lore.kernel.org/all/f9ff999a-e170-b66b-7caf-293f2b147ac2@opensource.wdc.com/ Suggested-by: Dave Chinner <david@fromorbit.com> Tested-by: Xiubo Li <xiubli@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1054009064
pushed a commit
to 1054009064/linux
that referenced
this pull request
May 2, 2024
commit 6fe6046 upstream. If stack_depot_save_flags() allocates memory it always drops __GFP_NOLOCKDEP flag. So when KASAN tries to track __GFP_NOLOCKDEP allocation we may end up with lockdep splat like bellow: ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc3+ torvalds#49 Not tainted ------------------------------------------------------ kswapd0/149 is trying to acquire lock: ffff88811346a920 (&xfs_nondir_ilock_class){++++}-{4:4}, at: xfs_reclaim_inode+0x3ac/0x590 [xfs] but task is already holding lock: ffffffff8bb33100 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x5d9/0xad0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: __lock_acquire+0x7da/0x1030 lock_acquire+0x15d/0x400 fs_reclaim_acquire+0xb5/0x100 prepare_alloc_pages.constprop.0+0xc5/0x230 __alloc_pages+0x12a/0x3f0 alloc_pages_mpol+0x175/0x340 stack_depot_save_flags+0x4c5/0x510 kasan_save_stack+0x30/0x40 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x83/0x90 kmem_cache_alloc+0x15e/0x4a0 __alloc_object+0x35/0x370 __create_object+0x22/0x90 __kmalloc_node_track_caller+0x477/0x5b0 krealloc+0x5f/0x110 xfs_iext_insert_raw+0x4b2/0x6e0 [xfs] xfs_iext_insert+0x2e/0x130 [xfs] xfs_iread_bmbt_block+0x1a9/0x4d0 [xfs] xfs_btree_visit_block+0xfb/0x290 [xfs] xfs_btree_visit_blocks+0x215/0x2c0 [xfs] xfs_iread_extents+0x1a2/0x2e0 [xfs] xfs_buffered_write_iomap_begin+0x376/0x10a0 [xfs] iomap_iter+0x1d1/0x2d0 iomap_file_buffered_write+0x120/0x1a0 xfs_file_buffered_write+0x128/0x4b0 [xfs] vfs_write+0x675/0x890 ksys_write+0xc3/0x160 do_syscall_64+0x94/0x170 entry_SYSCALL_64_after_hwframe+0x71/0x79 Always preserve __GFP_NOLOCKDEP to fix this. Link: https://lkml.kernel.org/r/20240418141133.22950-1-ryabinin.a.a@gmail.com Fixes: cd11016 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Reported-by: Xiubo Li <xiubli@redhat.com> Closes: https://lore.kernel.org/all/a0caa289-ca02-48eb-9bf2-d86fd47b71f4@redhat.com/ Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Closes: https://lore.kernel.org/all/f9ff999a-e170-b66b-7caf-293f2b147ac2@opensource.wdc.com/ Suggested-by: Dave Chinner <david@fromorbit.com> Tested-by: Xiubo Li <xiubli@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1054009064
pushed a commit
to 1054009064/linux
that referenced
this pull request
May 2, 2024
commit 6fe6046 upstream. If stack_depot_save_flags() allocates memory it always drops __GFP_NOLOCKDEP flag. So when KASAN tries to track __GFP_NOLOCKDEP allocation we may end up with lockdep splat like bellow: ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc3+ torvalds#49 Not tainted ------------------------------------------------------ kswapd0/149 is trying to acquire lock: ffff88811346a920 (&xfs_nondir_ilock_class){++++}-{4:4}, at: xfs_reclaim_inode+0x3ac/0x590 [xfs] but task is already holding lock: ffffffff8bb33100 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x5d9/0xad0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: __lock_acquire+0x7da/0x1030 lock_acquire+0x15d/0x400 fs_reclaim_acquire+0xb5/0x100 prepare_alloc_pages.constprop.0+0xc5/0x230 __alloc_pages+0x12a/0x3f0 alloc_pages_mpol+0x175/0x340 stack_depot_save_flags+0x4c5/0x510 kasan_save_stack+0x30/0x40 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x83/0x90 kmem_cache_alloc+0x15e/0x4a0 __alloc_object+0x35/0x370 __create_object+0x22/0x90 __kmalloc_node_track_caller+0x477/0x5b0 krealloc+0x5f/0x110 xfs_iext_insert_raw+0x4b2/0x6e0 [xfs] xfs_iext_insert+0x2e/0x130 [xfs] xfs_iread_bmbt_block+0x1a9/0x4d0 [xfs] xfs_btree_visit_block+0xfb/0x290 [xfs] xfs_btree_visit_blocks+0x215/0x2c0 [xfs] xfs_iread_extents+0x1a2/0x2e0 [xfs] xfs_buffered_write_iomap_begin+0x376/0x10a0 [xfs] iomap_iter+0x1d1/0x2d0 iomap_file_buffered_write+0x120/0x1a0 xfs_file_buffered_write+0x128/0x4b0 [xfs] vfs_write+0x675/0x890 ksys_write+0xc3/0x160 do_syscall_64+0x94/0x170 entry_SYSCALL_64_after_hwframe+0x71/0x79 Always preserve __GFP_NOLOCKDEP to fix this. Link: https://lkml.kernel.org/r/20240418141133.22950-1-ryabinin.a.a@gmail.com Fixes: cd11016 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Reported-by: Xiubo Li <xiubli@redhat.com> Closes: https://lore.kernel.org/all/a0caa289-ca02-48eb-9bf2-d86fd47b71f4@redhat.com/ Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Closes: https://lore.kernel.org/all/f9ff999a-e170-b66b-7caf-293f2b147ac2@opensource.wdc.com/ Suggested-by: Dave Chinner <david@fromorbit.com> Tested-by: Xiubo Li <xiubli@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1054009064
pushed a commit
to 1054009064/linux
that referenced
this pull request
May 2, 2024
commit 6fe6046 upstream. If stack_depot_save_flags() allocates memory it always drops __GFP_NOLOCKDEP flag. So when KASAN tries to track __GFP_NOLOCKDEP allocation we may end up with lockdep splat like bellow: ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc3+ torvalds#49 Not tainted ------------------------------------------------------ kswapd0/149 is trying to acquire lock: ffff88811346a920 (&xfs_nondir_ilock_class){++++}-{4:4}, at: xfs_reclaim_inode+0x3ac/0x590 [xfs] but task is already holding lock: ffffffff8bb33100 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x5d9/0xad0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: __lock_acquire+0x7da/0x1030 lock_acquire+0x15d/0x400 fs_reclaim_acquire+0xb5/0x100 prepare_alloc_pages.constprop.0+0xc5/0x230 __alloc_pages+0x12a/0x3f0 alloc_pages_mpol+0x175/0x340 stack_depot_save_flags+0x4c5/0x510 kasan_save_stack+0x30/0x40 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x83/0x90 kmem_cache_alloc+0x15e/0x4a0 __alloc_object+0x35/0x370 __create_object+0x22/0x90 __kmalloc_node_track_caller+0x477/0x5b0 krealloc+0x5f/0x110 xfs_iext_insert_raw+0x4b2/0x6e0 [xfs] xfs_iext_insert+0x2e/0x130 [xfs] xfs_iread_bmbt_block+0x1a9/0x4d0 [xfs] xfs_btree_visit_block+0xfb/0x290 [xfs] xfs_btree_visit_blocks+0x215/0x2c0 [xfs] xfs_iread_extents+0x1a2/0x2e0 [xfs] xfs_buffered_write_iomap_begin+0x376/0x10a0 [xfs] iomap_iter+0x1d1/0x2d0 iomap_file_buffered_write+0x120/0x1a0 xfs_file_buffered_write+0x128/0x4b0 [xfs] vfs_write+0x675/0x890 ksys_write+0xc3/0x160 do_syscall_64+0x94/0x170 entry_SYSCALL_64_after_hwframe+0x71/0x79 Always preserve __GFP_NOLOCKDEP to fix this. Link: https://lkml.kernel.org/r/20240418141133.22950-1-ryabinin.a.a@gmail.com Fixes: cd11016 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Reported-by: Xiubo Li <xiubli@redhat.com> Closes: https://lore.kernel.org/all/a0caa289-ca02-48eb-9bf2-d86fd47b71f4@redhat.com/ Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Closes: https://lore.kernel.org/all/f9ff999a-e170-b66b-7caf-293f2b147ac2@opensource.wdc.com/ Suggested-by: Dave Chinner <david@fromorbit.com> Tested-by: Xiubo Li <xiubli@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1054009064
pushed a commit
to 1054009064/linux
that referenced
this pull request
May 2, 2024
commit 6fe6046 upstream. If stack_depot_save_flags() allocates memory it always drops __GFP_NOLOCKDEP flag. So when KASAN tries to track __GFP_NOLOCKDEP allocation we may end up with lockdep splat like bellow: ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc3+ torvalds#49 Not tainted ------------------------------------------------------ kswapd0/149 is trying to acquire lock: ffff88811346a920 (&xfs_nondir_ilock_class){++++}-{4:4}, at: xfs_reclaim_inode+0x3ac/0x590 [xfs] but task is already holding lock: ffffffff8bb33100 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x5d9/0xad0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: __lock_acquire+0x7da/0x1030 lock_acquire+0x15d/0x400 fs_reclaim_acquire+0xb5/0x100 prepare_alloc_pages.constprop.0+0xc5/0x230 __alloc_pages+0x12a/0x3f0 alloc_pages_mpol+0x175/0x340 stack_depot_save_flags+0x4c5/0x510 kasan_save_stack+0x30/0x40 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x83/0x90 kmem_cache_alloc+0x15e/0x4a0 __alloc_object+0x35/0x370 __create_object+0x22/0x90 __kmalloc_node_track_caller+0x477/0x5b0 krealloc+0x5f/0x110 xfs_iext_insert_raw+0x4b2/0x6e0 [xfs] xfs_iext_insert+0x2e/0x130 [xfs] xfs_iread_bmbt_block+0x1a9/0x4d0 [xfs] xfs_btree_visit_block+0xfb/0x290 [xfs] xfs_btree_visit_blocks+0x215/0x2c0 [xfs] xfs_iread_extents+0x1a2/0x2e0 [xfs] xfs_buffered_write_iomap_begin+0x376/0x10a0 [xfs] iomap_iter+0x1d1/0x2d0 iomap_file_buffered_write+0x120/0x1a0 xfs_file_buffered_write+0x128/0x4b0 [xfs] vfs_write+0x675/0x890 ksys_write+0xc3/0x160 do_syscall_64+0x94/0x170 entry_SYSCALL_64_after_hwframe+0x71/0x79 Always preserve __GFP_NOLOCKDEP to fix this. Link: https://lkml.kernel.org/r/20240418141133.22950-1-ryabinin.a.a@gmail.com Fixes: cd11016 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Reported-by: Xiubo Li <xiubli@redhat.com> Closes: https://lore.kernel.org/all/a0caa289-ca02-48eb-9bf2-d86fd47b71f4@redhat.com/ Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Closes: https://lore.kernel.org/all/f9ff999a-e170-b66b-7caf-293f2b147ac2@opensource.wdc.com/ Suggested-by: Dave Chinner <david@fromorbit.com> Tested-by: Xiubo Li <xiubli@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1054009064
pushed a commit
to 1054009064/linux
that referenced
this pull request
May 2, 2024
commit 6fe6046 upstream. If stack_depot_save_flags() allocates memory it always drops __GFP_NOLOCKDEP flag. So when KASAN tries to track __GFP_NOLOCKDEP allocation we may end up with lockdep splat like bellow: ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc3+ torvalds#49 Not tainted ------------------------------------------------------ kswapd0/149 is trying to acquire lock: ffff88811346a920 (&xfs_nondir_ilock_class){++++}-{4:4}, at: xfs_reclaim_inode+0x3ac/0x590 [xfs] but task is already holding lock: ffffffff8bb33100 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x5d9/0xad0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: __lock_acquire+0x7da/0x1030 lock_acquire+0x15d/0x400 fs_reclaim_acquire+0xb5/0x100 prepare_alloc_pages.constprop.0+0xc5/0x230 __alloc_pages+0x12a/0x3f0 alloc_pages_mpol+0x175/0x340 stack_depot_save_flags+0x4c5/0x510 kasan_save_stack+0x30/0x40 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x83/0x90 kmem_cache_alloc+0x15e/0x4a0 __alloc_object+0x35/0x370 __create_object+0x22/0x90 __kmalloc_node_track_caller+0x477/0x5b0 krealloc+0x5f/0x110 xfs_iext_insert_raw+0x4b2/0x6e0 [xfs] xfs_iext_insert+0x2e/0x130 [xfs] xfs_iread_bmbt_block+0x1a9/0x4d0 [xfs] xfs_btree_visit_block+0xfb/0x290 [xfs] xfs_btree_visit_blocks+0x215/0x2c0 [xfs] xfs_iread_extents+0x1a2/0x2e0 [xfs] xfs_buffered_write_iomap_begin+0x376/0x10a0 [xfs] iomap_iter+0x1d1/0x2d0 iomap_file_buffered_write+0x120/0x1a0 xfs_file_buffered_write+0x128/0x4b0 [xfs] vfs_write+0x675/0x890 ksys_write+0xc3/0x160 do_syscall_64+0x94/0x170 entry_SYSCALL_64_after_hwframe+0x71/0x79 Always preserve __GFP_NOLOCKDEP to fix this. Link: https://lkml.kernel.org/r/20240418141133.22950-1-ryabinin.a.a@gmail.com Fixes: cd11016 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Reported-by: Xiubo Li <xiubli@redhat.com> Closes: https://lore.kernel.org/all/a0caa289-ca02-48eb-9bf2-d86fd47b71f4@redhat.com/ Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Closes: https://lore.kernel.org/all/f9ff999a-e170-b66b-7caf-293f2b147ac2@opensource.wdc.com/ Suggested-by: Dave Chinner <david@fromorbit.com> Tested-by: Xiubo Li <xiubli@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ptr1337
pushed a commit
to CachyOS/linux
that referenced
this pull request
May 2, 2024
commit 6fe6046 upstream. If stack_depot_save_flags() allocates memory it always drops __GFP_NOLOCKDEP flag. So when KASAN tries to track __GFP_NOLOCKDEP allocation we may end up with lockdep splat like bellow: ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc3+ torvalds#49 Not tainted ------------------------------------------------------ kswapd0/149 is trying to acquire lock: ffff88811346a920 (&xfs_nondir_ilock_class){++++}-{4:4}, at: xfs_reclaim_inode+0x3ac/0x590 [xfs] but task is already holding lock: ffffffff8bb33100 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x5d9/0xad0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: __lock_acquire+0x7da/0x1030 lock_acquire+0x15d/0x400 fs_reclaim_acquire+0xb5/0x100 prepare_alloc_pages.constprop.0+0xc5/0x230 __alloc_pages+0x12a/0x3f0 alloc_pages_mpol+0x175/0x340 stack_depot_save_flags+0x4c5/0x510 kasan_save_stack+0x30/0x40 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x83/0x90 kmem_cache_alloc+0x15e/0x4a0 __alloc_object+0x35/0x370 __create_object+0x22/0x90 __kmalloc_node_track_caller+0x477/0x5b0 krealloc+0x5f/0x110 xfs_iext_insert_raw+0x4b2/0x6e0 [xfs] xfs_iext_insert+0x2e/0x130 [xfs] xfs_iread_bmbt_block+0x1a9/0x4d0 [xfs] xfs_btree_visit_block+0xfb/0x290 [xfs] xfs_btree_visit_blocks+0x215/0x2c0 [xfs] xfs_iread_extents+0x1a2/0x2e0 [xfs] xfs_buffered_write_iomap_begin+0x376/0x10a0 [xfs] iomap_iter+0x1d1/0x2d0 iomap_file_buffered_write+0x120/0x1a0 xfs_file_buffered_write+0x128/0x4b0 [xfs] vfs_write+0x675/0x890 ksys_write+0xc3/0x160 do_syscall_64+0x94/0x170 entry_SYSCALL_64_after_hwframe+0x71/0x79 Always preserve __GFP_NOLOCKDEP to fix this. Link: https://lkml.kernel.org/r/20240418141133.22950-1-ryabinin.a.a@gmail.com Fixes: cd11016 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Reported-by: Xiubo Li <xiubli@redhat.com> Closes: https://lore.kernel.org/all/a0caa289-ca02-48eb-9bf2-d86fd47b71f4@redhat.com/ Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Closes: https://lore.kernel.org/all/f9ff999a-e170-b66b-7caf-293f2b147ac2@opensource.wdc.com/ Suggested-by: Dave Chinner <david@fromorbit.com> Tested-by: Xiubo Li <xiubli@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
a completely trivial patch to remove a completely redundant blank line.