error[E0277]: syntax_pos::symbol::LocalInternedString cannot be sent between threads safely
#3613
Comments
|
I can't reproduce this with the current rust-lang/rust master branch. rustup-toolchain-install-master -f -n master
cargo +master buildworks for me. https://rust-lang-nursery.github.io/rust-toolstate/ is Am I missing something? |
|
I'm not sure(I haven't tried it that way), but that link now shows: Maybe |
|
oh my bad, it then fails(like in OP) only for me... probably my fault - I'll try to figure out something |
|
The only difference I see between your setup and mine is the cargo commit: This is the current cargo commit on the rust-lang/rust master branch |
|
uuu, that is good information @flip1995 ! (meanwhile github decided to crash with unicorns hence why this info is delayed by a few minutes) EDIT: Oh I just noticed that I also fell back to the rustup rustc also! hmm... |
|
Ok, I can confirm that it works when I use Therefore the issue must be in something(that I changed?) in my local |
|
@flip1995 can you please tell me your Edit: I'm recompiling this is what I've had before: and after update: diff: $ colordiff -up before.deleteme after.deleteme
--- before.deleteme 2019-01-02 19:11:21.388819219 +0100
+++ after.deleteme 2019-01-02 19:26:34.442340582 +0100
@@ -1,4 +1,3 @@
-$ git submodule status
74d81d80052cb88925f0e73b12fbd0b73ab7b5a0 src/doc/book (one-book-to-rule-them-all-26-g74d81d80)
419edb885ec1a98c0747b3907003d79e3e6b93a9 src/doc/edition-guide (419edb8)
b7eb4a087207af2405c0669fa577f8545b894c66 src/doc/nomicon (remotes/origin/Gankro-patch-1-51-gb7eb4a0)
@@ -6,13 +5,13 @@ $ git submodule status
2ce92beabb912d417a7314d6da83ac9b50dc2afb src/doc/rust-by-example (heads/master-117-g2ce92beabb)
344c4e437ba4cfa5c14db643ec4d6b68dcd164c5 src/doc/rustc-guide (344c4e4)
f4728ed8fa2296c5b009bb85550e157e1e57ed0b src/llvm (f4728ed8fa2)
--7f23313edff8beccb3fe44b815714269c5124c15 src/llvm-emscripten
+ 7f23313edff8beccb3fe44b815714269c5124c15 src/llvm-emscripten (remotes/origin/rust-emscripten-2018-11-09)
513e067908f3e2eb8b31ad1c12b2e0a62817e557 src/stdsimd (0.0.3-410-g513e0679)
0d1f1bbeabd5b43a7f3ecfa16540af8e76d5efb4 src/tools/cargo (0.30.0-782-g0d1f1bbe)
--032312dd0140a7074c9b89d305fe44eb0e44e407 src/tools/clang
+ 032312dd0140a7074c9b89d305fe44eb0e44e407 src/tools/clang (remotes/origin/rust-release-80-v2)
39bd84494f4a9b40f2e3b38416a91d52d5c4738b src/tools/clippy (v0.0.212-1119-g39bd8449)
--1928c5eeb613a4c6d232fc47ae91914bbfd92a79 src/tools/lld
--8ad0817ce45b0eef9d374691b23f2bd69c164254 src/tools/lldb
+ 1928c5eeb613a4c6d232fc47ae91914bbfd92a79 src/tools/lld (remotes/origin/rust-llvm-release-8-0-0-v2)
+ 8ad0817ce45b0eef9d374691b23f2bd69c164254 src/tools/lldb (remotes/origin/rust-release-80-v2)
2e2a33aab897273a36498d526530f648d6113dc8 src/tools/miri (remotes/origin/rustup-8-g2e2a33a)
6f5e4bba7b1586fca6e0ea7724cadb5683b2f308 src/tools/rls (1.31.6-96-g6f5e4bb)
27dec6cae3a8132d8a073aad6775425c85095c99 src/tools/rust-installer (remotes/origin/HEAD)Hmm, so no change then... except that I didn't have anything checkout for: |
ghost
reopened this
|
@xftroxgpx you should update submodules by running When key tools like clippy or rls are broken (just like at the moment) you have to fix them by yourself. Easier alternative would be to exclude broken tools or checkout rust commit where they do work. |
|
Thanks! That explains why the submodules were already updated because I was using Then maybe these rustc build instructions are outdated: I'm not even sure that |
|
|
|
@xftroxgpx I tested it with your rustc commit from the OP, the latest master commit and the rustup nightly toolchain. I used the cargo I posted above (resp. the one from rustup nightly). It's probably something you changed and/or a certain cargo+rustc combination. But as long as Clippy compiles with the current master branch of rust-lang/rust (which is tested in the CI), we can't do much here for you. :( |
|
I tried cloning same OP error. (well those same 4 errors)I'll edit this post with further failed tries, but if success I'll post anew. |
|
Did you make any changes to the |
yes Here's the current one (I forgot what else I changed: probably only removed the i686 one), still compiling new rustc with it now: # Sample TOML configuration file for building Rust.
#
# To configure rustbuild, copy this file to the directory from which you will be
# running the build, and name it config.toml.
#
# All options are commented out by default in this file, and they're commented
# out with their default values. The build system by default looks for
# `config.toml` in the current directory of a build for build configuration, but
# a custom configuration file can also be specified with `--config` to the build
# system.
# =============================================================================
# Tweaking how LLVM is compiled
# =============================================================================
[llvm]
# Indicates whether rustc will support compilation with LLVM
# note: rustc does not compile without LLVM at the moment
#enabled = true
# Indicates whether the LLVM build is a Release or Debug build
#optimize = true
optimize = true
# Indicates whether LLVM should be built with ThinLTO. Note that this will
# only succeed if you use clang, lld, llvm-ar, and llvm-ranlib in your C/C++
# toolchain (see the `cc`, `cxx`, `linker`, `ar`, and `ranlib` options below).
# More info at: https://clang.llvm.org/docs/ThinLTO.html#clang-bootstrap
#thin-lto = false
# Indicates whether an LLVM Release build should include debug info
#release-debuginfo = false
release-debuginfo = false
# Indicates whether the LLVM assertions are enabled or not
#assertions = false
assertions = false
# Indicates whether ccache is used when building LLVM
#ccache = false
# or alternatively ...
#ccache = "/path/to/ccache"
ccache = "/usr/bin/ccache"
# If an external LLVM root is specified, we automatically check the version by
# default to make sure it's within the range that we're expecting, but setting
# this flag will indicate that this version check should not be done.
#version-check = true
# Link libstdc++ statically into the librustc_llvm instead of relying on a
# dynamic version to be available.
#static-libstdcpp = false
static-libstdcpp = false
# Tell the LLVM build system to use Ninja instead of the platform default for
# the generated build system. This can sometimes be faster than make, for
# example.
#ninja = false
ninja = true
# LLVM targets to build support for.
# Note: this is NOT related to Rust compilation targets. However, as Rust is
# dependent on LLVM for code generation, turning targets off here WILL lead to
# the resulting rustc being unable to compile for the disabled architectures.
# Also worth pointing out is that, in case support for new targets are added to
# LLVM, enabling them here doesn't mean Rust is automatically gaining said
# support. You'll need to write a target specification at least, and most
# likely, teach rustc about the C ABI of the target. Get in touch with the
# Rust team and file an issue if you need assistance in porting!
#targets = "X86;ARM;AArch64;Mips;PowerPC;SystemZ;JSBackend;MSP430;Sparc;NVPTX;Hexagon"
targets = "X86"
#;ARM;Mips"
# LLVM experimental targets to build support for. These targets are specified in
# the same format as above, but since these targets are experimental, they are
# not built by default and the experimental Rust compilation targets that depend
# on them will not work unless the user opts in to building them. By default the
# `WebAssembly` and `RISCV` targets are enabled when compiling LLVM from scratch.
#experimental-targets = "WebAssembly;RISCV"
# Cap the number of parallel linker invocations when compiling LLVM.
# This can be useful when building LLVM with debug info, which significantly
# increases the size of binaries and consequently the memory required by
# each linker process.
# If absent or 0, linker invocations are treated like any other job and
# controlled by rustbuild's -j parameter.
#link-jobs = 0
link-jobs = 4
# When invoking `llvm-config` this configures whether the `--shared` argument is
# passed to prefer linking to shared libraries.
#link-shared = false
# When building llvm, this configures what is being appended to the version.
# If absent, we let the version as-is.
#version-suffix = "-rust"
# On MSVC you can compile LLVM with clang-cl, but the test suite doesn't pass
# with clang-cl, so this is special in that it only compiles LLVM with clang-cl
#clang-cl = '/path/to/clang-cl.exe'
# =============================================================================
# General build configuration options
# =============================================================================
[build]
# Build triple for the original snapshot compiler. This must be a compiler that
# nightlies are already produced for. The current platform must be able to run
# binaries of this build triple and the nightly will be used to bootstrap the
# first compiler.
#build = "x86_64-unknown-linux-gnu" # defaults to your host platform
build = "x86_64-unknown-linux-gnu"
# In addition to the build triple, other triples to produce full compiler
# toolchains for. Each of these triples will be bootstrapped from the build
# triple and then will continue to bootstrap themselves. This platform must
# currently be able to run all of the triples provided here.
#host = ["x86_64-unknown-linux-gnu"] # defaults to just the build triple
host = ["x86_64-unknown-linux-gnu"]
# In addition to all host triples, other triples to produce the standard library
# for. Each host triple will be used to produce a copy of the standard library
# for each target triple.
target = ["x86_64-unknown-linux-gnu"] # defaults to just the build triple
#target = ["x86_64-unknown-linux-gnu", "i686-unknown-linux-gnu" ] #XXX: disabled i686 to avoid wasting too much time compiling! FIXME: re-add i686 later.
#note: added i686-unknown-linux-gnu to be able to compile ${HOME}/build/2nonpkgs/rust.stuff/rustlearnage/usize/go_32bit
# Instead of downloading the src/stage0.txt version of Cargo specified, use
# this Cargo binary instead to build all Rust code
#cargo = "/path/to/bin/cargo"
#cargo = "/home/xftroxgpx/.cargo/bin/cargo"
#^ brought by rustup !
# Instead of downloading the src/stage0.txt version of the compiler
# specified, use this rustc binary instead as the stage0 snapshot compiler.
#rustc = "/path/to/bin/rustc"
#rustc = "/home/xftroxgpx/.cargo/bin/rustc" #this fails as follows:
#^ brought by rustup !
#rustc = "/home/xftroxgpx/bin/rustc"
#^ will use the rustup version unless we already have a stage2,1 or 0 rustc; this fails as follows:
#XXX: don't set rustc here, or you'll hit this https://github.com/rust-lang/rust/pull/47006#issuecomment-360561167 (see comment above that) and local-rebuild must not be true also!
# Flag to specify whether any documentation is built. If false, rustdoc and
# friends will still be compiled but they will not be used to generate any
# documentation.
#docs = true
docs = true
# Indicate whether the compiler should be documented in addition to the standard
# library and facade crates.
#compiler-docs = false
compiler-docs = true
# Indicate whether submodules are managed and updated automatically.
#submodules = true
submodules = true
# Update submodules only when the checked out commit in the submodules differs
# from what is committed in the main rustc repo.
#fast-submodules = true
# The path to (or name of) the GDB executable to use. This is only used for
# executing the debuginfo test suite.
#gdb = "gdb"
# The node.js executable to use. Note that this is only used for the emscripten
# target when running tests, otherwise this can be omitted.
#nodejs = "node"
# Python interpreter to use for various tasks throughout the build, notably
# rustdoc tests, the lldb python interpreter, and some dist bits and pieces.
# Note that Python 2 is currently required.
#python = "python2.7"
# Force Cargo to check that Cargo.lock describes the precise dependency
# set that all the Cargo.toml files create, instead of updating it.
#locked-deps = false
locked-deps = false
# Indicate whether the vendored sources are used for Rust dependencies or not
#vendor = false
# Typically the build system will build the rust compiler twice. The second
# compiler, however, will simply use its own libraries to link against. If you
# would rather to perform a full bootstrap, compiling the compiler three times,
# then you can set this option to true. You shouldn't ever need to set this
# option to true.
#full-bootstrap = false
full-bootstrap = false
# Enable a build of the extended rust tool set which is not only the compiler
# but also tools such as Cargo. This will also produce "combined installers"
# which are used to install Rust and Cargo together. This is disabled by
# default.
#extended = false
extended = false
# Installs chosen set of extended tools if enabled. By default builds all.
# If chosen tool failed to build the installation fails.
#tools = ["cargo", "rls", "rustfmt", "analysis", "src"]
tools = [ "src" ]
# Verbosity level: 0 == not verbose, 1 == verbose, 2 == very verbose
#verbose = 0
verbose = 0
# Build the sanitizer runtimes
#sanitizers = false
sanitizers = false
# Build the profiler runtime
#profiler = false
profiler = false
# Indicates whether the native libraries linked into Cargo will be statically
# linked or not.
#cargo-native-static = false
# Run the build with low priority, by setting the process group's "nice" value
# to +10 on Unix platforms, and by using a "low priority" job object on Windows.
#low-priority = false
low-priority = true
# Arguments passed to the `./configure` script, used during distcheck. You
# probably won't fill this in but rather it's filled in by the `./configure`
# script.
#configure-args = []
# Indicates that a local rebuild is occurring instead of a full bootstrap,
# essentially skipping stage0 as the local compiler is recompiling itself again.
local-rebuild = false
#local-rebuild = true #don't to true here or you'll hit this https://github.com/rust-lang/rust/pull/47006#issuecomment-360561167 (see comment above that) and [build] rustc must not be set also!
# Print out how long each rustbuild step took (mostly intended for CI and
# tracking over time)
#print-step-timings = false
print-step-timings = false
# =============================================================================
# General install configuration options
# =============================================================================
[install]
# Instead of installing to /usr/local, install to this path instead.
#prefix = "/usr/local"
# Where to install system configuration files
# If this is a relative path, it will get installed in `prefix` above
#sysconfdir = "/etc"
# Where to install documentation in `prefix` above
#docdir = "share/doc/rust"
# Where to install binaries in `prefix` above
#bindir = "bin"
# Where to install libraries in `prefix` above
#libdir = "lib"
# Where to install man pages in `prefix` above
#mandir = "share/man"
# Where to install data in `prefix` above (currently unused)
#datadir = "share"
# Where to install additional info in `prefix` above (currently unused)
#infodir = "share/info"
# Where to install local state (currently unused)
# If this is a relative path, it will get installed in `prefix` above
#localstatedir = "/var/lib"
# =============================================================================
# Options for compiling Rust code itself
# =============================================================================
[rust]
# Whether or not to optimize the compiler and standard library.
#
# Note: the slowness of the non optimized compiler compiling itself usually
# outweighs the time gains in not doing optimizations, therefore a
# full bootstrap takes much more time with `optimize` set to false.
#optimize = true
optimize = true
# Indicates that the build should be configured for debugging Rust. A
# `debug`-enabled compiler and standard library will be somewhat
# slower (due to e.g. checking of debug assertions) but should remain
# usable.
#
# Note: If this value is set to `true`, it will affect a number of
# configuration options below as well, if they have been left
# unconfigured in this file.
#
# Note: changes to the `debug` setting do *not* affect `optimize`
# above. In theory, a "maximally debuggable" environment would
# set `optimize` to `false` above to assist the introspection
# facilities of debuggers like lldb and gdb. To recreate such an
# environment, explicitly set `optimize` to `false` and `debug`
# to `true`. In practice, everyone leaves `optimize` set to
# `true`, because an unoptimized rustc with debugging
# enabled becomes *unusably slow* (e.g. rust-lang/rust#24840
# reported a 25x slowdown) and bootstrapping the supposed
# "maximally debuggable" environment (notably libstd) takes
# hours to build.
#
#debug = false
debug = false
# Number of codegen units to use for each compiler invocation. A value of 0
# means "the number of cores on this machine", and 1+ is passed through to the
# compiler.
#codegen-units = 1
codegen-units = 1 #We currently have the capability to do multiple codegen units in parallel. Unfortunately, one drawback of using this functionality is that using multiple codegen units loses optimization opportunities, like inlining, between the units. src: https://internals.rust-lang.org/t/towards-a-second-edition-of-the-compiler/5582
# Sets the number of codegen units to build the standard library with,
# regardless of what the codegen-unit setting for the rest of the compiler is.
#codegen-units-std = 1
codegen-units-std = 1
# Whether or not debug assertions are enabled for the compiler and standard
# library. Also enables compilation of debug! and trace! logging macros.
#debug-assertions = false
debug-assertions = true #that delay issue isn't fixed yet (rustc -vV with RUST_BACKTRACE=1) well, let's see now: https://github.com/ianlancetaylor/libbacktrace/commit/b0d690331db157f53ac4a8bd9d4bb7513a561d90.patch
#to test if fixed, you have to cargo new --bin newproj make it 'panic!()' then:
#$ time RUST_BACKTRACE=0 ./target/debug/newproj
#real 0m0.003s
#user 0m0.000s
#sys 0m0.004s
#$ time RUST_BACKTRACE=1 ./target/debug/panic
#real 0m0.096s
#user 0m0.092s
#sys 0m0.003s
#debug-assertions = false
# Whether or not debuginfo is emitted
debuginfo = false
#debuginfo = true #nope//this might be why this happens: "LLVM ERROR: Broken module found, compilation aborted! (fragment covers entire variable)" https://github.com/rust-lang/rust/issues/48910 //this alone isn't it, but debuginfo-lines=true is it, unsure atm if debuginfo has to also be false! assuming yes
# Whether or not line number debug information is emitted
debuginfo-lines = false
#debuginfo-lines = true #ok this triggers "fragment covers entire variable", thanks to michaelwoerister for telling me!
# Whether or not to only build debuginfo for the standard library if enabled.
# If enabled, this will not compile the compiler with debuginfo, just the
# standard library.
debuginfo-only-std = false
#debuginfo-only-std = true
# Enable debuginfo for the extended tools: cargo, rls, rustfmt
# Adding debuginfo makes them several times larger.
#debuginfo-tools = false
debuginfo-tools = true
# Whether or not `panic!`s generate backtraces (RUST_BACKTRACE)
#backtrace = true
backtrace = true
# Whether to always use incremental compilation when building rustc
#incremental = false
incremental = true
# Build rustc with experimental parallelization
#experimental-parallel-queries = false
experimental-parallel-queries = true
# The default linker that will be hard-coded into the generated compiler for
# targets that don't specify linker explicitly in their target specifications.
# Note that this is not the linker used to link said compiler.
#default-linker = "cc"
# The "channel" for the Rust build to produce. The stable/beta channels only
# allow using stable features, whereas the nightly and dev channels allow using
# nightly features
#channel = "dev"
channel = "dev"
# By default the `rustc` executable is built with `-Wl,-rpath` flags on Unix
# platforms to ensure that the compiler is usable by default from the build
# directory (as it links to a number of dynamic libraries). This may not be
# desired in distributions, for example.
#rpath = true
rpath = true
# Emits extraneous output from tests to ensure that failures of the test
# harness are debuggable just from logfiles.
#verbose-tests = false
verbose-tests = false
# Flag indicating whether tests are compiled with optimizations (the -O flag) or
# with debuginfo (the -g flag)
#optimize-tests = true
#debuginfo-tests = true
optimize-tests = false
debuginfo-tests = false
# Flag indicating whether codegen tests will be run or not. If you get an error
# saying that the FileCheck executable is missing, you may want to disable this.
# Also see the target's llvm-filecheck option.
#codegen-tests = true
codegen-tests = false #for no good reason; just to be sure
# Flag indicating whether git info will be retrieved from .git automatically.
# Having the git information can cause a lot of rebuilds during development.
# Note: If this attribute is not explicitly set (e.g. if left commented out) it
# will default to true if channel = "dev", but will default to false otherwise.
#ignore-git = true
ignore-git = false #i don't get it! what git information and why will it cause rebuilds?
# When creating source tarballs whether or not to create a source tarball.
#dist-src = false
# Whether to also run the Miri tests suite when running tests.
# As a side-effect also generates MIR for all libraries.
#test-miri = false
# After building or testing extended tools (e.g. clippy and rustfmt), append the
# result (broken, compiling, testing) into this JSON file.
#save-toolstates = "/path/to/toolstates.json"
# This is an array of the codegen backends that will be compiled for the rustc
# that's being compiled. The default is to only build the LLVM codegen backend,
# but you can also optionally enable the "emscripten" backend for asm.js or
# make this an empty array (but that probably won't get too far in the
# bootstrap)
#codegen-backends = ["llvm"]
# This is the name of the directory in which codegen backends will get installed
#codegen-backends-dir = "codegen-backends"
# Flag indicating whether `libstd` calls an imported function to handle basic IO
# when targeting WebAssembly. Enable this to debug tests for the `wasm32-unknown-unknown`
# target, as without this option the test output will not be captured.
#wasm-syscall = false
# Indicates whether LLD will be compiled and made available in the sysroot for
# rustc to execute.
lld = false
# Indicates whether some LLVM tools, like llvm-objdump, will be made available in the
# sysroot.
#llvm-tools = false
# Indicates whether LLDB will be made available in the sysroot.
# This is only built if LLVM is also being built.
#lldb = false
# Whether to deny warnings in crates
#deny-warnings = true
deny-warnings = true
# Print backtrace on internal compiler errors during bootstrap
#backtrace-on-ice = false
backtrace-on-ice = true
# Whether to verify generated LLVM IR
#verify-llvm-ir = false
#verify-llvm-ir = true
#2 aug 2018: error: unknown debugging option: `verify-llvm-ir`
# Map all debuginfo paths for libstd and crates to `/rust/$sha/$crate/...`,
# generally only set for releases
#remap-debuginfo = false
# Link the compiler against `jemalloc`, where on Linux and OSX it should
# override the default allocator for rustc and LLVM.
#jemalloc = false
# Run tests in various test suites with the "nll compare mode" in addition to
# running the tests in normal mode. Largely only used on CI and during local
# development of NLL
#test-compare-mode = false
# =============================================================================
# Options for specific targets
#
# Each of the following options is scoped to the specific target triple in
# question and is used for determining how to compile each target.
# =============================================================================
[target.x86_64-unknown-linux-gnu]
# C compiler to be used to compiler C code. Note that the
# default value is platform specific, and if not specified it may also depend on
# what platform is crossing to what platform.
#cc = "cc"
# C++ compiler to be used to compiler C++ code (e.g. LLVM and our LLVM shims).
# This is only used for host targets.
#cxx = "c++"
# Archiver to be used to assemble static libraries compiled from C/C++ code.
# Note: an absolute path should be used, otherwise LLVM build will break.
#ar = "ar"
# Ranlib to be used to assemble static libraries compiled from C/C++ code.
# Note: an absolute path should be used, otherwise LLVM build will break.
#ranlib = "ranlib"
# Linker to be used to link Rust code. Note that the
# default value is platform specific, and if not specified it may also depend on
# what platform is crossing to what platform.
#linker = "cc"
# Path to the `llvm-config` binary of the installation of a custom LLVM to link
# against. Note that if this is specified we don't compile LLVM at all for this
# target.
#llvm-config = "../path/to/llvm/root/bin/llvm-config"
# Normally the build system can find LLVM's FileCheck utility, but if
# not, you can specify an explicit file name for it.
#llvm-filecheck = "/path/to/FileCheck"
# If this target is for Android, this option will be required to specify where
# the NDK for the target lives. This is used to find the C compiler to link and
# build native code.
#android-ndk = "/path/to/ndk"
# Force static or dynamic linkage of the standard library for this target. If
# this target is a host for rustc, this will also affect the linkage of the
# compiler itself. This is useful for building rustc on targets that normally
# only use static libraries. If unset, the target's default linkage is used.
#crt-static = false
# The root location of the MUSL installation directory. The library directory
# will also need to contain libunwind.a for an unwinding implementation. Note
# that this option only makes sense for MUSL targets that produce statically
# linked binaries
#musl-root = "..."
# Used in testing for configuring where the QEMU images are located, you
# probably don't want to use this.
#qemu-rootfs = "..."
# =============================================================================
# Distribution options
#
# These options are related to distribution, mostly for the Rust project itself.
# You probably won't need to concern yourself with any of these options
# =============================================================================
[dist]
# This is the folder of artifacts that the build system will sign. All files in
# this directory will be signed with the default gpg key using the system `gpg`
# binary. The `asc` and `sha256` files will all be output into the standard dist
# output folder (currently `build/dist`)
#
# This folder should be populated ahead of time before the build system is
# invoked.
#sign-folder = "path/to/folder/to/sign"
# This is a file which contains the password of the default gpg key. This will
# be passed to `gpg` down the road when signing all files in `sign-folder`
# above. This should be stored in plaintext.
#gpg-password-file = "path/to/gpg/password"
# The remote address that all artifacts will eventually be uploaded to. The
# build system generates manifests which will point to these urls, and for the
# manifests to be correct they'll have to have the right URLs encoded.
#
# Note that this address should not contain a trailing slash as file names will
# be appended to it.
#upload-addr = "https://example.com/folder"
# Whether to build a plain source tarball to upload
# We disable that on Windows not to override the one already uploaded on S3
# as the one built on Windows will contain backslashes in paths causing problems
# on linux
#src-tarball = true
src-tarball = false
#
# Whether to allow failures when building tools
#missing-tools = false
missing-tools = false
here's a diff to give you an idea of what changed/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust/rust
$ colordiff -up <(cat config.toml.example | grep '=' | grep -v '^\s*$'| sed -re 's/^#(.*$)/\1/') <(cat config.toml | grep -v '^#' | grep -v '^\s*$')
--- /dev/fd/63 2019-01-02 23:27:59.934233287 +0100
+++ /dev/fd/62 2019-01-02 23:27:59.936233262 +0100
@@ -1,115 +1,54 @@
- =============================================================================
- =============================================================================
-enabled = true
+[llvm]
optimize = true
-thin-lto = false
release-debuginfo = false
assertions = false
-ccache = false
-ccache = "/path/to/ccache"
-version-check = true
+ccache = "/usr/bin/ccache"
static-libstdcpp = false
-ninja = false
-targets = "X86;ARM;AArch64;Mips;PowerPC;SystemZ;JSBackend;MSP430;Sparc;NVPTX;Hexagon"
-experimental-targets = "WebAssembly;RISCV"
-link-jobs = 0
-link-shared = false
-version-suffix = "-rust"
-clang-cl = '/path/to/clang-cl.exe'
- =============================================================================
- =============================================================================
-build = "x86_64-unknown-linux-gnu" # defaults to your host platform
-host = ["x86_64-unknown-linux-gnu"] # defaults to just the build triple
+ninja = true
+targets = "X86"
+link-jobs = 4
+[build]
+build = "x86_64-unknown-linux-gnu"
+host = ["x86_64-unknown-linux-gnu"]
target = ["x86_64-unknown-linux-gnu"] # defaults to just the build triple
-cargo = "/path/to/bin/cargo"
-rustc = "/path/to/bin/rustc"
docs = true
-compiler-docs = false
+compiler-docs = true
submodules = true
-fast-submodules = true
-gdb = "gdb"
-nodejs = "node"
-python = "python2.7"
locked-deps = false
-vendor = false
full-bootstrap = false
extended = false
-tools = ["cargo", "rls", "rustfmt", "analysis", "src"]
- Verbosity level: 0 == not verbose, 1 == verbose, 2 == very verbose
+tools = [ "src" ]
verbose = 0
sanitizers = false
profiler = false
-cargo-native-static = false
-low-priority = false
-configure-args = []
+low-priority = true
local-rebuild = false
print-step-timings = false
- =============================================================================
- =============================================================================
-prefix = "/usr/local"
-sysconfdir = "/etc"
-docdir = "share/doc/rust"
-bindir = "bin"
-libdir = "lib"
-mandir = "share/man"
-datadir = "share"
-infodir = "share/info"
-localstatedir = "/var/lib"
- =============================================================================
- =============================================================================
+[install]
+[rust]
optimize = true
debug = false
-codegen-units = 1
+codegen-units = 1 #We currently have the capability to do multiple codegen units in parallel. Unfortunately, one drawback of using this functionality is that using multiple codegen units loses optimization opportunities, like inlining, between the units. src: https://internals.rust-lang.org/t/towards-a-second-edition-of-the-compiler/5582
codegen-units-std = 1
-debug-assertions = false
+debug-assertions = true #that delay issue isn't fixed yet (rustc -vV with RUST_BACKTRACE=1) well, let's see now: https://github.com/ianlancetaylor/libbacktrace/commit/b0d690331db157f53ac4a8bd9d4bb7513a561d90.patch
debuginfo = false
debuginfo-lines = false
debuginfo-only-std = false
-debuginfo-tools = false
+debuginfo-tools = true
backtrace = true
-incremental = false
-experimental-parallel-queries = false
-default-linker = "cc"
+incremental = true
+experimental-parallel-queries = true
channel = "dev"
rpath = true
verbose-tests = false
-optimize-tests = true
-debuginfo-tests = true
-codegen-tests = true
- will default to true if channel = "dev", but will default to false otherwise.
-ignore-git = true
-dist-src = false
-test-miri = false
-save-toolstates = "/path/to/toolstates.json"
-codegen-backends = ["llvm"]
-codegen-backends-dir = "codegen-backends"
-wasm-syscall = false
+optimize-tests = false
+debuginfo-tests = false
+codegen-tests = false #for no good reason; just to be sure
+ignore-git = false #i don't get it! what git information and why will it cause rebuilds?
lld = false
-llvm-tools = false
-lldb = false
deny-warnings = true
-backtrace-on-ice = false
-verify-llvm-ir = false
-remap-debuginfo = false
-jemalloc = false
-test-compare-mode = false
- =============================================================================
- =============================================================================
-cc = "cc"
-cxx = "c++"
-ar = "ar"
-ranlib = "ranlib"
-linker = "cc"
-llvm-config = "../path/to/llvm/root/bin/llvm-config"
-llvm-filecheck = "/path/to/FileCheck"
-android-ndk = "/path/to/ndk"
-crt-static = false
-musl-root = "..."
-qemu-rootfs = "..."
- =============================================================================
- =============================================================================
-sign-folder = "path/to/folder/to/sign"
-gpg-password-file = "path/to/gpg/password"
-upload-addr = "https://example.com/folder"
-src-tarball = true
+backtrace-on-ice = true
+[target.x86_64-unknown-linux-gnu]
+[dist]
+src-tarball = false
missing-tools = falseIn OP, I had this I'm on ArchLinux, 64bit... |
|
oh crap, I think I see what's wrong:
|
|
Confirmed! it's because of My bad for not including(or mentioning) I reopen this because I assume |
ghost
reopened this
|
It will probably be fixed by rust-lang/rust#57308 and #3621 (merged) 🙂 |
|
tl;dr: those patches worked. I applied that rust one manually(EDIT and since that patch is merged upstream by now I can confirm it still fixed this issue) and tried compiling Compiling clippy_lints v0.0.212 (/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust-clippy/clippy_lints)
!! LD_LIBRARY_PATH=/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust-clippy/target/debug/deps:/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust/rust/build/x86_64-unknown-linux-gnu/stage2/lib:/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust/rust/build/x86_64-unknown-linux-gnu/stage2/lib/rustlib/x86_64-unknown-linux-gnu/lib:/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib:/home/xftroxgpx/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/lib:/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust/rust/build/x86_64-unknown-linux-gnu/stage2/lib/rustlib/x86_64-unknown-linux-gnu/lib:/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust/rust/build/x86_64-unknown-linux-gnu/stage1/lib/rustlib/x86_64-unknown-linux-gnu/lib:/home/xftroxgpx/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/lib:
!! Executing '/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust/rust/build//x86_64-unknown-linux-gnu/stage2/bin//rustc' in pwd='/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust-clippy' with args: '--edition=2018 --crate-name clippy_lints /home/xftroxgpx/build/2nonpkgs/rust.stuff/rust-clippy/clippy_lints/src/lib.rs --color always --crate-type lib --emit=dep-info,link -C debuginfo=2 -C metadata=134dfced93fe20d3 -C extra-filename=-134dfced93fe20d3 --out-dir /home/xftroxgpx/build/2nonpkgs/rust.stuff/rust-clippy/target/debug/deps -C incremental=/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust-clippy/target/debug/incremental -L dependency=/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust-clippy/target/debug/deps --extern cargo_metadata=/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust-clippy/target/debug/deps/libcargo_metadata-ab2c761a71e48cab.rlib --extern if_chain=/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust-clippy/target/debug/deps/libif_chain-be6030112903d804.rlib --extern itertools=/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust-clippy/target/debug/deps/libitertools-594f1e251cdbabdb.rlib --extern lazy_static=/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust-clippy/target/debug/deps/liblazy_static-6455ba91e699c0c0.rlib --extern matches=/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust-clippy/target/debug/deps/libmatches-aa7c2d82a3becdd3.rlib --extern pulldown_cmark=/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust-clippy/target/debug/deps/libpulldown_cmark-ebf051869dbdc02b.rlib --extern quine_mc_cluskey=/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust-clippy/target/debug/deps/libquine_mc_cluskey-84a24c48160a526f.rlib --extern regex_syntax=/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust-clippy/target/debug/deps/libregex_syntax-aa960f5af9b0d02e.rlib --extern semver=/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust-clippy/target/debug/deps/libsemver-7d3edb24a4bab5ce.rlib --extern serde=/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust-clippy/target/debug/deps/libserde-f09e02de978da39f.rlib --extern serde_derive=/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust-clippy/target/debug/deps/libserde_derive-7c9a74ee6443514a.so --extern smallvec=/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust-clippy/target/debug/deps/libsmallvec-dde859d3513beea8.rlib --extern toml=/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust-clippy/target/debug/deps/libtoml-39943b7e79ac0c13.rlib --extern unicode_normalization=/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust-clippy/target/debug/deps/libunicode_normalization-47b8b73d958e1540.rlib --extern url=/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust-clippy/target/debug/deps/liburl-725de984ca99fdd1.rlib -L native=/home/xftroxgpx/build/2nonpkgs/rust.stuff/rust-clippy/target/debug/build/backtrace-sys-cd06c32b67f980d3/out'
error[E0599]: no method named `predicate_must_hold` found for type `rustc::infer::InferCtxt<'_, '_, '_>` in the current scope
--> /home/xftroxgpx/build/2nonpkgs/rust.stuff/rust-clippy/clippy_lints/src/utils/mod.rs:274:30
|
274 | .enter(|infcx| infcx.predicate_must_hold(&obligation))
| ^^^^^^^^^^^^^^^^^^^
|
= help: did you mean `predicate_may_hold`?
error[E0599]: no method named `moves_by_default` found for type `&'tcx rustc::ty::TyS<'tcx>` in the current scope
--> /home/xftroxgpx/build/2nonpkgs/rust.stuff/rust-clippy/clippy_lints/src/utils/mod.rs:887:9
|
887 | !ty.moves_by_default(cx.tcx.global_tcx(), cx.param_env, DUMMY_SP)
| ^^^^^^^^^^^^^^^^
error[E0599]: no method named `moves_by_default` found for type `&rustc::ty::TyS<'_>` in the current scope
--> /home/xftroxgpx/build/2nonpkgs/rust.stuff/rust-clippy/clippy_lints/src/question_mark.rs:116:17
|
116 | expr_ty.moves_by_default(cx.tcx, cx.param_env, expression.span)
| ^^^^^^^^^^^^^^^^
error: aborting due to 3 previous errors
For more information about this error, try `rustc --explain E0599`.
error: Could not compile `clippy_lints`.
To learn more, run the command again with --verbose.
real 2m56.547s
user 8m21.816s
sys 0m7.693sRetried compiling the new now latest |
ghost
mentioned this issue
This issue was closed.
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
EDIT: tl;dr: this error(and the 3 others inside Details below) happens because I've compiled
rustcwith non-defaultconfig.tomlsetting:experimental-parallel-queries = trueIn trying to compile
rust-clippy's latest commit 85ba5f0 I get the following error:cargo/rustc used:
(that must be
rustup's clippy)I realized that the fail is also seen here: https://rust-lang-nursery.github.io/rust-toolstate/ and points to these rust changes https://github.com/rust-lang/rust/commits/cae164753f557f668cb75610abda4f790981e5e6The text was updated successfully, but these errors were encountered: