fix possible race in subflow_finish_connect() #8

pabeni · 2020-03-24T11:13:36Z

if (inet_sk_state_load(parent) != TCP_ESTABLISHED) {
inet_sk_state_store(parent, TCP_ESTABLISHED);

is unsafe on shutdown (we may override a close state)

When experimenting with bpf_send_signal() helper in our production environment (5.2 based), we experienced a deadlock in NMI mode: #5 [ffffc9002219f770] queued_spin_lock_slowpath at ffffffff8110be24 #6 [ffffc9002219f770] _raw_spin_lock_irqsave at ffffffff81a43012 #7 [ffffc9002219f780] try_to_wake_up at ffffffff810e7ecd #8 [ffffc9002219f7e0] signal_wake_up_state at ffffffff810c7b55 #9 [ffffc9002219f7f0] __send_signal at ffffffff810c8602 #10 [ffffc9002219f830] do_send_sig_info at ffffffff810ca31a #11 [ffffc9002219f868] bpf_send_signal at ffffffff8119d227 #12 [ffffc9002219f988] bpf_overflow_handler at ffffffff811d4140 #13 [ffffc9002219f9e0] __perf_event_overflow at ffffffff811d68cf #14 [ffffc9002219fa10] perf_swevent_overflow at ffffffff811d6a09 #15 [ffffc9002219fa38] ___perf_sw_event at ffffffff811e0f47 #16 [ffffc9002219fc30] __schedule at ffffffff81a3e04d #17 [ffffc9002219fc90] schedule at ffffffff81a3e219 #18 [ffffc9002219fca0] futex_wait_queue_me at ffffffff8113d1b9 #19 [ffffc9002219fcd8] futex_wait at ffffffff8113e529 #20 [ffffc9002219fdf0] do_futex at ffffffff8113ffbc #21 [ffffc9002219fec0] __x64_sys_futex at ffffffff81140d1c #22 [ffffc9002219ff38] do_syscall_64 at ffffffff81002602 #23 [ffffc9002219ff50] entry_SYSCALL_64_after_hwframe at ffffffff81c00068 The above call stack is actually very similar to an issue reported by Commit eac9153 ("bpf/stackmap: Fix deadlock with rq_lock in bpf_get_stack()") by Song Liu. The only difference is bpf_send_signal() helper instead of bpf_get_stack() helper. The above deadlock is triggered with a perf_sw_event. Similar to Commit eac9153, the below almost identical reproducer used tracepoint point sched/sched_switch so the issue can be easily caught. /* stress_test.c */ #include <stdio.h> #include <stdlib.h> #include <sys/mman.h> #include <pthread.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #define THREAD_COUNT 1000 char *filename; void *worker(void *p) { void *ptr; int fd; char *pptr; fd = open(filename, O_RDONLY); if (fd < 0) return NULL; while (1) { struct timespec ts = {0, 1000 + rand() % 2000}; ptr = mmap(NULL, 4096 * 64, PROT_READ, MAP_PRIVATE, fd, 0); usleep(1); if (ptr == MAP_FAILED) { printf("failed to mmap\n"); break; } munmap(ptr, 4096 * 64); usleep(1); pptr = malloc(1); usleep(1); pptr[0] = 1; usleep(1); free(pptr); usleep(1); nanosleep(&ts, NULL); } close(fd); return NULL; } int main(int argc, char *argv[]) { void *ptr; int i; pthread_t threads[THREAD_COUNT]; if (argc < 2) return 0; filename = argv[1]; for (i = 0; i < THREAD_COUNT; i++) { if (pthread_create(threads + i, NULL, worker, NULL)) { fprintf(stderr, "Error creating thread\n"); return 0; } } for (i = 0; i < THREAD_COUNT; i++) pthread_join(threads[i], NULL); return 0; } and the following command: 1. run `stress_test /bin/ls` in one windown 2. hack bcc trace.py with the following change: --- a/tools/trace.py +++ b/tools/trace.py @@ -513,6 +513,7 @@ BPF_PERF_OUTPUT(%s); __data.tgid = __tgid; __data.pid = __pid; bpf_get_current_comm(&__data.comm, sizeof(__data.comm)); + bpf_send_signal(10); %s %s %s.perf_submit(%s, &__data, sizeof(__data)); 3. in a different window run ./trace.py -p $(pidof stress_test) t:sched:sched_switch The deadlock can be reproduced in our production system. Similar to Song's fix, the fix is to delay sending signal if irqs is disabled to avoid deadlocks involving with rq_lock. With this change, my above stress-test in our production system won't cause deadlock any more. I also implemented a scale-down version of reproducer in the selftest (a subsequent commit). With latest bpf-next, it complains for the following potential deadlock. [ 32.832450] -> #1 (&p->pi_lock){-.-.}: [ 32.833100] _raw_spin_lock_irqsave+0x44/0x80 [ 32.833696] task_rq_lock+0x2c/0xa0 [ 32.834182] task_sched_runtime+0x59/0xd0 [ 32.834721] thread_group_cputime+0x250/0x270 [ 32.835304] thread_group_cputime_adjusted+0x2e/0x70 [ 32.835959] do_task_stat+0x8a7/0xb80 [ 32.836461] proc_single_show+0x51/0xb0 ... [ 32.839512] -> #0 (&(&sighand->siglock)->rlock){....}: [ 32.840275] __lock_acquire+0x1358/0x1a20 [ 32.840826] lock_acquire+0xc7/0x1d0 [ 32.841309] _raw_spin_lock_irqsave+0x44/0x80 [ 32.841916] __lock_task_sighand+0x79/0x160 [ 32.842465] do_send_sig_info+0x35/0x90 [ 32.842977] bpf_send_signal+0xa/0x10 [ 32.843464] bpf_prog_bc13ed9e4d3163e3_send_signal_tp_sched+0x465/0x1000 [ 32.844301] trace_call_bpf+0x115/0x270 [ 32.844809] perf_trace_run_bpf_submit+0x4a/0xc0 [ 32.845411] perf_trace_sched_switch+0x10f/0x180 [ 32.846014] __schedule+0x45d/0x880 [ 32.846483] schedule+0x5f/0xd0 ... [ 32.853148] Chain exists of: [ 32.853148] &(&sighand->siglock)->rlock --> &p->pi_lock --> &rq->lock [ 32.853148] [ 32.854451] Possible unsafe locking scenario: [ 32.854451] [ 32.855173] CPU0 CPU1 [ 32.855745] ---- ---- [ 32.856278] lock(&rq->lock); [ 32.856671] lock(&p->pi_lock); [ 32.857332] lock(&rq->lock); [ 32.857999] lock(&(&sighand->siglock)->rlock); Deadlock happens on CPU0 when it tries to acquire &sighand->siglock but it has been held by CPU1 and CPU1 tries to grab &rq->lock and cannot get it. This is not exactly the callstack in our production environment, but sympotom is similar and both locks are using spin_lock_irqsave() to acquire the lock, and both involves rq_lock. The fix to delay sending signal when irq is disabled also fixed this issue. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200304191104.2796501-1-yhs@fb.com

Ido Schimmel says: ==================== Add packet trap policers support Background ========== Devices capable of offloading the kernel's datapath and perform functions such as bridging and routing must also be able to send (trap) specific packets to the kernel (i.e., the CPU) for processing. For example, a device acting as a multicast-aware bridge must be able to trap IGMP membership reports to the kernel for processing by the bridge module. Motivation ========== In most cases, the underlying device is capable of handling packet rates that are several orders of magnitude higher compared to those that can be handled by the CPU. Therefore, in order to prevent the underlying device from overwhelming the CPU, devices usually include packet trap policers that are able to police the trapped packets to rates that can be handled by the CPU. Proposed solution ================= This patch set allows capable device drivers to register their supported packet trap policers with devlink. User space can then tune the parameters of these policers (currently, rate and burst size) and read from the device the number of packets that were dropped by the policer, if supported. These packet trap policers can then be bound to existing packet trap groups, which are used to aggregate logically related packet traps. As a result, trapped packets are policed to rates that can be handled the host CPU. Example usage ============= Instantiate netdevsim: Dump available packet trap policers: netdevsim/netdevsim10: policer 1 rate 1000 burst 128 policer 2 rate 2000 burst 256 policer 3 rate 3000 burst 512 Change the parameters of a packet trap policer: Bind a packet trap policer to a packet trap group: Dump parameters and statistics of a packet trap policer: netdevsim/netdevsim10: policer 3 rate 100 burst 16 stats: rx: dropped 92 Unbind a packet trap policer from a packet trap group: Patch set overview ================== Patch #1 adds the core infrastructure in devlink which allows capable device drivers to register their supported packet trap policers with devlink. Patch #2 extends the existing devlink-trap documentation. Patch #3 extends netdevsim to register a few dummy packet trap policers with devlink. Used later on to selftests the core infrastructure. Patches #4-#5 adds infrastructure in devlink to allow binding of packet trap policers to packet trap groups. Patch #6 extends netdevsim to allow such binding. Patch #7 adds a selftest over netdevsim that verifies the core devlink-trap policers functionality. Patches #8-#14 gradually add devlink-trap policers support in mlxsw. Patch #15 adds a selftest over mlxsw. All registered packet trap policers are verified to handle the configured rate and burst size. Future plans ============ * Allow changing default association between packet traps and packet trap groups * Add more packet traps. For example, for control packets (e.g., IGMP) v3: * Rebase v2 (address comments from Jiri and Jakub): * Patch #1: Add 'strict_start_type' in devlink policy * Patch #1: Have device drivers provide max/min rate/burst size for each policer. Use them to check validity of user provided parameters * Patch #3: Remove check about burst size being a power of 2 and instead add a debugfs knob to fail the operation * Patch #3: Provide max/min rate/burst size when registering policers and remove the validity checks from nsim_dev_devlink_trap_policer_set() * Patch #5: Check for presence of 'DEVLINK_ATTR_TRAP_POLICER_ID' in devlink_trap_group_set() and bail if not present * Patch #5: Add extack error message in case trap group was partially modified * Patch #7: Add test case with new 'fail_trap_policer_set' knob * Patch #7: Add test case for partially modified trap group * Patch #10: Provide max/min rate/burst size when registering policers * Patch #11: Remove the max/min validity checks from __mlxsw_sp_trap_policer_set() ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

If KVM wasn't used at all before we crash the cleanup procedure fails with BUG: unable to handle page fault for address: ffffffffffffffc8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 23215067 P4D 23215067 PUD 23217067 PMD 0 Oops: 0000 [#8] SMP PTI CPU: 0 PID: 3542 Comm: bash Kdump: loaded Tainted: G D 5.6.0-rc2+ #823 RIP: 0010:crash_vmclear_local_loaded_vmcss.cold+0x19/0x51 [kvm_intel] The root cause is that loaded_vmcss_on_cpu list is not yet initialized, we initialize it in hardware_enable() but this only happens when we start a VM. Previously, we used to have a bitmap with enabled CPUs and that was preventing [masking] the issue. Initialized loaded_vmcss_on_cpu list earlier, right before we assign crash_vmclear_loaded_vmcss pointer. blocked_vcpu_on_cpu list and blocked_vcpu_on_cpu_lock are moved altogether for consistency. Fixes: 31603d4 ("KVM: VMX: Always VMCLEAR in-use VMCSes during crash with kexec support") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200401081348.1345307-1-vkuznets@redhat.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Fix tcon use-after-free and NULL ptr deref. Customer system crashes with the following kernel log: [462233.169868] CIFS VFS: Cancelling wait for mid 4894753 cmd: 14 => a QUERY DIR [462233.228045] CIFS VFS: cifs_put_smb_ses: Session Logoff failure rc=-4 [462233.305922] CIFS VFS: cifs_put_smb_ses: Session Logoff failure rc=-4 [462233.306205] CIFS VFS: cifs_put_smb_ses: Session Logoff failure rc=-4 [462233.347060] CIFS VFS: cifs_put_smb_ses: Session Logoff failure rc=-4 [462233.347107] CIFS VFS: Close unmatched open [462233.347113] BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 ... [exception RIP: cifs_put_tcon+0xa0] (this is doing tcon->ses->server) #6 [...] smb2_cancelled_close_fid at ... [cifs] #7 [...] process_one_work at ... #8 [...] worker_thread at ... #9 [...] kthread at ... The most likely explanation we have is: * When we put the last reference of a tcon (refcount=0), we close the cached share root handle. * If closing a handle is interrupted, SMB2_close() will queue a SMB2_close() in a work thread. * The queued object keeps a tcon ref so we bump the tcon refcount, jumping from 0 to 1. * We reach the end of cifs_put_tcon(), we free the tcon object despite it now having a refcount of 1. * The queued work now runs, but the tcon, ses & server was freed in the meantime resulting in a crash. THREAD 1 ======== cifs_put_tcon => tcon refcount reach 0 SMB2_tdis close_shroot_lease close_shroot_lease_locked => if cached root has lease && refcount = 0 smb2_close_cached_fid => if cached root valid SMB2_close => retry close in a thread if interrupted smb2_handle_cancelled_close __smb2_handle_cancelled_close => !! tcon refcount bump 0 => 1 !! INIT_WORK(&cancelled->work, smb2_cancelled_close_fid); queue_work(cifsiod_wq, &cancelled->work) => queue work tconInfoFree(tcon); ==> freed! cifs_put_smb_ses(ses); ==> freed! THREAD 2 (workqueue) ======== smb2_cancelled_close_fid SMB2_close(0, cancelled->tcon, ...); => use-after-free of tcon cifs_put_tcon(cancelled->tcon); => tcon refcount reach 0 second time *CRASH* Fixes: d919131 ("CIFS: Close cached root handle only if it has a lease") Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

pabeni · 2020-04-27T09:22:18Z

fixed upstream by:

commit 1200832
Author: Paolo Abeni pabeni@redhat.com
Date: Fri Apr 24 13:15:21 2020 +0200

mptcp: fix race in msk status update

Ido Schimmel says: ==================== mlxsw: Prepare SPAN API for upcoming changes Switched port analyzer (SPAN) is used for packet mirroring. Over mlxsw this is achieved by attaching tc-mirred action to either matchall or flower classifier. The current API used to configure SPAN consists of two functions: mlxsw_sp_span_mirror_add() and mlxsw_sp_span_mirror_del(). These two functions pack a lot of different operations: * SPAN agent configuration: Determining the egress port and optional headers that need to encapsulate the mirrored packet (when mirroring to a gretap, for example) * Egress mirror buffer configuration: Allocating / freeing a buffer when port is analyzed (inspected) at egress * SPAN agent binding: Binding the SPAN agent to a trigger, if any. The current triggers are incoming / outgoing packet and they are only used for matchall-based mirroring This non-modular design makes it difficult to extend the API for future changes, such as new mirror targets (CPU) and new global triggers (early dropped packets, for example). Therefore, this patch set gradually adds APIs for above mentioned operations and then converts the two existing users to use it instead of the old API. No functional changes intended. Tested with existing mirroring selftests. Patch set overview: Patches #1-#5 gradually add the new API Patches #6-#8 convert existing users to use the new API Patch #9 removes the old API ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Sameeh Jubran says: ==================== Enhance current features in ena driver Difference from v2: * dropped patch "net: ena: move llq configuration from ena_probe to ena_device_init()" * reworked patch ""net: ena: implement ena_com_get_admin_polling_mode() to drop the prototype Difference from v1: * reodered paches #1 and #2. * dropped adding Rx/Tx drops to ethtool in patch #8 V1: This patchset introduces the following: * minor changes to RSS feature * add total rx and tx drop counter * add unmask_interrupt counter for ethtool statistics * add missing implementation for ena_com_get_admin_polling_mode() * some minor code clean-up and cosmetics * use SHUTDOWN as reset reason when closing interface ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

This BUG halt was reported a while back, but the patch somehow got missed: PID: 2879 TASK: c16adaa0 CPU: 1 COMMAND: "sctpn" #0 [f418dd28] crash_kexec at c04a7d8c #1 [f418dd7c] oops_end at c0863e02 #2 [f418dd90] do_invalid_op at c040aaca #3 [f418de28] error_code (via invalid_op) at c08631a5 EAX: f34baac0 EBX: 00000090 ECX: f418deb0 EDX: f5542950 EBP: 00000000 DS: 007b ESI: f34ba800 ES: 007b EDI: f418dea0 GS: 00e0 CS: 0060 EIP: c046fa5e ERR: ffffffff EFLAGS: 00010286 #4 [f418de5c] add_timer at c046fa5e #5 [f418de68] sctp_do_sm at f8db8c77 [sctp] #6 [f418df30] sctp_primitive_SHUTDOWN at f8dcc1b5 [sctp] #7 [f418df48] inet_shutdown at c080baf9 #8 [f418df5c] sys_shutdown at c079eedf #9 [f418df70] sys_socketcall at c079fe88 EAX: ffffffda EBX: 0000000d ECX: bfceea90 EDX: 0937af98 DS: 007b ESI: 0000000c ES: 007b EDI: b7150ae4 SS: 007b ESP: bfceea7c EBP: bfceeaa8 GS: 0033 CS: 0073 EIP: b775c424 ERR: 00000066 EFLAGS: 00000282 It appears that the side effect that starts the shutdown timer was processed multiple times, which can happen as multiple paths can trigger it. This of course leads to the BUG halt in add_timer getting called. Fix seems pretty straightforward, just check before the timer is added if its already been started. If it has mod the timer instead to min(current expiration, new expiration) Its been tested but not confirmed to fix the problem, as the issue has only occured in production environments where test kernels are enjoined from being installed. It appears to be a sane fix to me though. Also, recentely, Jere found a reproducer posted on list to confirm that this resolves the issues Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Vlad Yasevich <vyasevich@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: jere.leppanen@nokia.com CC: marcelo.leitner@gmail.com CC: netdev@vger.kernel.org Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Fix use after free when user user space request uobject concurrently for the same object, within the RCU grace period. In that case, remove_handle_idr_uobject() is called twice and we will have an extra put on the uobject which cause use after free. Fix it by leaving the uobject write locked after it was removed from the idr. Call to rdma_lookup_put_uobject with UVERBS_LOOKUP_DESTROY instead of UVERBS_LOOKUP_WRITE will do the work. refcount_t: underflow; use-after-free. WARNING: CPU: 0 PID: 1381 at lib/refcount.c:28 refcount_warn_saturate+0xfe/0x1a0 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 1381 Comm: syz-executor.0 Not tainted 5.5.0-rc3 #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x94/0xce panic+0x234/0x56f __warn+0x1cc/0x1e1 report_bug+0x200/0x310 fixup_bug.part.11+0x32/0x80 do_error_trap+0xd3/0x100 do_invalid_op+0x31/0x40 invalid_op+0x1e/0x30 RIP: 0010:refcount_warn_saturate+0xfe/0x1a0 Code: 0f 0b eb 9b e8 23 f6 6d ff 80 3d 6c d4 19 03 00 75 8d e8 15 f6 6d ff 48 c7 c7 c0 02 55 bd c6 05 57 d4 19 03 01 e8 a2 58 49 ff <0f> 0b e9 6e ff ff ff e8 f6 f5 6d ff 80 3d 42 d4 19 03 00 0f 85 5c RSP: 0018:ffffc90002df7b98 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff88810f6a193c RCX: ffffffffba649009 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88811b0283cc RBP: 0000000000000003 R08: ffffed10236060e3 R09: ffffed10236060e3 R10: 0000000000000001 R11: ffffed10236060e2 R12: ffff88810f6a193c R13: ffffc90002df7d60 R14: 0000000000000000 R15: ffff888116ae6a08 uverbs_uobject_put+0xfd/0x140 __uobj_perform_destroy+0x3d/0x60 ib_uverbs_close_xrcd+0x148/0x170 ib_uverbs_write+0xaa5/0xdf0 __vfs_write+0x7c/0x100 vfs_write+0x168/0x4a0 ksys_write+0xc8/0x200 do_syscall_64+0x9c/0x390 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x465b49 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f759d122c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000073bfa8 RCX: 0000000000465b49 RDX: 000000000000000c RSI: 0000000020000080 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f759d1236bc R13: 00000000004ca27c R14: 000000000070de40 R15: 00000000ffffffff Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: 0x39400000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Fixes: 7452a3c ("IB/uverbs: Allow RDMA_REMOVE_DESTROY to work concurrently with disassociate") Link: https://lore.kernel.org/r/20200527135534.482279-1-leon@kernel.org Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Pablo Neira Ayuso says: ==================== the indirect flow_block infrastructure, revisited This series fixes b5140a3 ("netfilter: flowtable: add indr block setup support") that adds support for the indirect block for the flowtable. This patch crashes the kernel with the TC CT action. [ 630.908086] BUG: kernel NULL pointer dereference, address: 00000000000000f0 [ 630.908233] #PF: error_code(0x0000) - not-present page [ 630.908304] PGD 800000104addd067 P4D 800000104addd067 PUD 104311d067 PMD 0 [ 630.908380] Oops: 0000 [#1] SMP PTI [ 630.908615] RIP: 0010:nf_flow_table_indr_block_cb+0xc0/0x190 [nf_flow_table] [ 630.908690] Code: 5b 41 5c 41 5d 41 5e 41 5f 5d c3 4c 89 75 a0 4c 89 65 a8 4d 89 ee 49 89 dd 4c 89 fe 48 c7 c7 b7 64 36 a0 31 c0 e8 ce ed d8 e0 <49> 8b b7 f0 00 00 00 48 c7 c7 c8 64 36 a0 31 c0 e8 b9 ed d8 e0 49[ 630.908790] RSP: 0018:ffffc9000895f8c0 EFLAGS: 00010246 [...] [ 630.910774] Call Trace: [ 630.911192] ? mlx5e_rep_indr_setup_block+0x270/0x270 [mlx5_core] [ 630.911621] ? mlx5e_rep_indr_setup_block+0x270/0x270 [mlx5_core] [ 630.912040] ? mlx5e_rep_indr_setup_block+0x270/0x270 [mlx5_core] [ 630.912443] flow_block_cmd+0x51/0x80 [ 630.912844] __flow_indr_block_cb_register+0x26c/0x510 [ 630.913265] mlx5e_nic_rep_netdevice_event+0x9e/0x110 [mlx5_core] [ 630.913665] notifier_call_chain+0x53/0xa0 [ 630.914063] raw_notifier_call_chain+0x16/0x20 [ 630.914466] call_netdevice_notifiers_info+0x39/0x90 [ 630.914859] register_netdevice+0x484/0x550 [ 630.915256] __ip_tunnel_create+0x12b/0x1f0 [ip_tunnel] [ 630.915661] ip_tunnel_init_net+0x116/0x180 [ip_tunnel] [ 630.916062] ipgre_tap_init_net+0x22/0x30 [ip_gre] [ 630.916458] ops_init+0x44/0x110 [ 630.916851] register_pernet_operations+0x112/0x200 A workaround patch to cure this crash has been proposed. However, there is another problem: The indirect flow_block still does not work for the new TC CT action. The problem is that the existing flow_indr_block_entry callback assumes you can look up for the flowtable from the netdevice to get the flow_block. This flow_block allows you to offload the flows via TC_SETUP_CLSFLOWER. Unfortunately, it is not possible to get the flow_block from the TC CT flowtables because they are _not_ bound to any specific netdevice. = What is the indirect flow_block infrastructure? The indirect flow_block infrastructure allows drivers to offload tc/netfilter rules that belong to software tunnel netdevices, e.g. vxlan. This indirect flow_block infrastructure relates tunnel netdevices with drivers because there is no obvious way to relate these two things from the control plane. = How does the indirect flow_block work before this patchset? Front-ends register the indirect block callback through flow_indr_add_block_cb() if they support for offloading tunnel netdevices. == Setting up an indirect block 1) Drivers track tunnel netdevices via NETDEV_{REGISTER,UNREGISTER} events. If there is a new tunnel netdevice that the driver can offload, then the driver invokes __flow_indr_block_cb_register() with the new tunnel netdevice and the driver callback. The __flow_indr_block_cb_register() call iterates over the list of the front-end callbacks. 2) The front-end callback sets up the flow_block_offload structure and it invokes the driver callback to set up the flow_block. 3) The driver callback now registers the flow_block structure and it returns the flow_block back to the front-end. 4) The front-end gets the flow_block object and it is now ready to offload rules for this tunnel netdevice. A simplified callgraph is represented below. Front-end Driver NETDEV_REGISTER | __flow_indr_block_cb_register(netdev, cb_priv, driver_cb) | [1] .--------------frontend_indr_block_cb(cb_priv, driver_cb) | . setup_flow_block_offload(bo) | [2] driver_cb(bo, cb_priv) -----------. | \/ set up flow_blocks [3] | add rules to flow_block <---------- TC_SETUP_CLSFLOWER [4] == Releasing the indirect flow_block There are two possibilities, either tunnel netdevice is removed or a netdevice (port representor) is removed. === Tunnel netdevice is removed Driver waits for the NETDEV_UNREGISTER event that announces the tunnel netdevice removal. Then, it calls __flow_indr_block_cb_unregister() to remove the flow_block and rules. Callgraph is very similar to the one described above. === Netdevice is removed (port representor) Driver calls __flow_indr_block_cb_unregister() to remove the existing netfilter/tc rule that belong to the tunnel netdevice. = How does the indirect flow_block work after this patchset? Drivers register the indirect flow_block setup callback through flow_indr_dev_register() if they support for offloading tunnel netdevices. == Setting up an indirect flow_block 1) Frontends check if dev->netdev_ops->ndo_setup_tc is unset. If so, frontends call flow_indr_dev_setup_offload(). This call invokes the drivers' indirect flow_block setup callback. 2) The indirect flow_block setup callback sets up a flow_block structure which relates the tunnel netdevice and the driver. 3) The front-end uses flow_block and offload the rules. Note that the operational to set up (non-indirect) flow_block is very similar. == Releasing the indirect flow_block === Tunnel netdevice is removed This calls flow_indr_dev_setup_offload() to set down the flow_block and remove the offloaded rules. This alternate path is exercised if dev->netdev_ops->ndo_setup_tc is unset. === Netdevice is removed (port representor) If a netdevice is removed, then it might need to to clean up the offloaded tc/netfilter rules that belongs to the tunnel netdevice: 1) The driver invokes flow_indr_dev_unregister() when a netdevice is removed. 2) This call iterates over the existing indirect flow_blocks and it invokes the cleanup callback to let the front-end remove the tc/netfilter rules. The cleanup callback already provides the flow_block that the front-end needs to clean up. Front-end Driver | flow_indr_dev_unregister(...) | iterate over list of indirect flow_block and invoke cleanup callback | .----------------------------- | . frontend_flow_block_cleanup(flow_block) . | \/ remove rules to flow_block TC_SETUP_CLSFLOWER = About this patchset This patchset aims to address the existing TC CT problem while simplifying the indirect flow_block infrastructure. Saving 300 LoC in the flow_offload core and the drivers. The operational gets aligned with the (non-indirect) flow_blocks logic. Patchset is composed of: Patch #1 add nf_flow_table_gc_cleanup() which is required by the netfilter's flowtable new indirect flow_block approach. Patch #2 adds the flow_block_indr object which is actually part of of the flow_block object. This stores the indirect flow_block metadata such as the tunnel netdevice owner and the cleanup callback (in case the tunnel netdevice goes away). This patch adds flow_indr_dev_{un}register() to allow drivers to offer netdevice tunnel hardware offload to the front-ends. Then, front-ends call flow_indr_dev_setup_offload() to invoke the drivers to set up the (indirect) flow_block. Patch #3 add the tcf_block_offload_init() helper function, this is a preparation patch to adapt the tc front-end to use this new indirect flow_block infrastructure. Patch #4 updates the tc and netfilter front-ends to use the new indirect flow_block infrastructure. Patch #5 updates the mlx5 driver to use the new indirect flow_block infrastructure. Patch #6 updates the nfp driver to use the new indirect flow_block infrastructure. Patch #7 updates the bnxt driver to use the new indirect flow_block infrastructure. Patch #8 removes the indirect flow_block infrastructure version 1, now that frontends and drivers have been translated to version 2 (coming in this patchset). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says: ==================== devlink: Add support for control packet traps So far device drivers were only able to register drop and exception packet traps with devlink. These traps are used for packets that were either dropped by the underlying device or encountered an exception (e.g., missing neighbour entry) during forwarding. However, in the steady state, the majority of the packets being trapped to the CPU are packets that are required for the correct functioning of the control plane. For example, ARP request and IGMP query packets. This patch set allows device drivers to register such control traps with devlink and expose their default control plane policy to user space. User space can then tune the packet trap policer settings according to its needs, as with existing packet traps. In a similar fashion to exception traps, the action associated with such traps cannot be changed as it can easily break the control plane. Unlike drop and exception traps, packets trapped via control traps are not reported to the kernel's drop monitor as they are not indicative of any problem. Patch set overview: Patches #1-#3 break out layer 3 exceptions to a different group to provide better granularity. A future patch set will make this completely configurable. Patch #4 adds a new trap action ('mirror') that is used for packets that are forwarded by the device and sent to the CPU. Such packets are marked by device drivers with 'skb->offload_fwd_mark = 1' in order to prevent the kernel from forwarding them again. Patch #5 adds the new trap type, 'control'. Patches #6-#8 gradually add various control traps to devlink with proper documentation. Patch #9 adds a few control traps to netdevsim, which are automatically exercised by existing devlink-trap selftest. Patches #10 performs small refactoring in mlxsw. Patches #11-#13 change mlxsw to register its existing control traps with devlink. Patch #14 adds a selftest over mlxsw that exercises all the registered control traps. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Check module parameter write/poll_queues before using it to catch too large values. Reproducer: modprobe -r nvme modprobe nvme write_queues=`nproc` echo $((`nproc`+1)) > /sys/module/nvme/parameters/write_queues echo 1 > /sys/block/nvme0n1/device/reset_controller [ 657.069000] ------------[ cut here ]------------ [ 657.069022] WARNING: CPU: 10 PID: 1163 at kernel/irq/affinity.c:390 irq_create_affinity_masks+0x47c/0x4a0 [ 657.069056] dm_region_hash dm_log dm_mod [ 657.069059] CPU: 10 PID: 1163 Comm: kworker/u193:9 Kdump: loaded Tainted: G W 5.6.0+ #8 [ 657.069060] Hardware name: Inspur SA5212M5/YZMB-00882-104, BIOS 4.0.9 08/27/2019 [ 657.069064] Workqueue: nvme-reset-wq nvme_reset_work [nvme] [ 657.069066] RIP: 0010:irq_create_affinity_masks+0x47c/0x4a0 [ 657.069067] Code: fe ff ff 48 c7 c0 b0 89 14 95 48 89 46 20 e9 e9 fb ff ff 31 c0 e9 90 fc ff ff 0f 0b 48 c7 44 24 08 00 00 00 00 e9 e9 fc ff ff <0f> 0b e9 87 fe ff ff 48 8b 7c 24 28 e8 33 a0 80 00 e9 b6 fc ff ff [ 657.069068] RSP: 0018:ffffb505ce1ffc78 EFLAGS: 00010202 [ 657.069069] RAX: 0000000000000060 RBX: ffff9b97921fe5c0 RCX: 0000000000000000 [ 657.069069] RDX: ffff9b67bad80000 RSI: 00000000ffffffa0 RDI: 0000000000000000 [ 657.069070] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff9b97921fe718 [ 657.069070] R10: ffff9b97921fe710 R11: 0000000000000001 R12: 0000000000000064 [ 657.069070] R13: 0000000000000060 R14: 0000000000000000 R15: 0000000000000001 [ 657.069071] FS: 0000000000000000(0000) GS:ffff9b67c0880000(0000) knlGS:0000000000000000 [ 657.069072] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 657.069072] CR2: 0000559eac6fc238 CR3: 000000057860a002 CR4: 00000000007606e0 [ 657.069073] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 657.069073] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 657.069073] PKRU: 55555554 [ 657.069074] Call Trace: [ 657.069080] __pci_enable_msix_range+0x233/0x5a0 [ 657.069085] ? kernfs_put+0xec/0x190 [ 657.069086] pci_alloc_irq_vectors_affinity+0xbb/0x130 [ 657.069089] nvme_reset_work+0x6e6/0xeab [nvme] [ 657.069093] ? __switch_to_asm+0x34/0x70 [ 657.069094] ? __switch_to_asm+0x40/0x70 [ 657.069095] ? nvme_irq_check+0x30/0x30 [nvme] [ 657.069098] process_one_work+0x1a7/0x370 [ 657.069101] worker_thread+0x1c9/0x380 [ 657.069102] ? max_active_store+0x80/0x80 [ 657.069103] kthread+0x112/0x130 [ 657.069104] ? __kthread_parkme+0x70/0x70 [ 657.069105] ret_from_fork+0x35/0x40 [ 657.069106] ---[ end trace f4f06b7d24513d06 ]--- [ 657.077110] nvme nvme0: 95/1/0 default/read/poll queues Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com> Signed-off-by: Christoph Hellwig <hch@lst.de>

Implement rtas_call_reentrant() for reentrant rtas-calls: "ibm,int-on", "ibm,int-off",ibm,get-xive" and "ibm,set-xive". On LoPAPR Version 1.1 (March 24, 2016), from 7.3.10.1 to 7.3.10.4, items 2 and 3 say: 2 - For the PowerPC External Interrupt option: The * call must be reentrant to the number of processors on the platform. 3 - For the PowerPC External Interrupt option: The * argument call buffer for each simultaneous call must be physically unique. So, these rtas-calls can be called in a lockless way, if using a different buffer for each cpu doing such rtas call. For this, it was suggested to add the buffer (struct rtas_args) in the PACA struct, so each cpu can have it's own buffer. The PACA struct received a pointer to rtas buffer, which is allocated in the memory range available to rtas 32-bit. Reentrant rtas calls are useful to avoid deadlocks in crashing, where rtas-calls are needed, but some other thread crashed holding the rtas.lock. This is a backtrace of a deadlock from a kdump testing environment: #0 arch_spin_lock #1 lock_rtas () #2 rtas_call (token=8204, nargs=1, nret=1, outputs=0x0) #3 ics_rtas_mask_real_irq (hw_irq=4100) #4 machine_kexec_mask_interrupts #5 default_machine_crash_shutdown #6 machine_crash_shutdown #7 __crash_kexec #8 crash_kexec #9 oops_end Signed-off-by: Leonardo Bras <leobras.c@gmail.com> [mpe: Move under #ifdef PSERIES to avoid build breakage] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200518234245.200672-3-leobras.c@gmail.com

when a MPTCP client tries to connect to itself, tcp_finish_connect() is never reached. Because of this, depending on the socket current state, multiple faulty behaviours can be observed: 1) a WARN_ON() in subflow_data_ready() is hit WARNING: CPU: 2 PID: 882 at net/mptcp/subflow.c:911 subflow_data_ready+0x18b/0x230 [...] CPU: 2 PID: 882 Comm: gh35 Not tainted 5.7.0+ #187 [...] RIP: 0010:subflow_data_ready+0x18b/0x230 [...] Call Trace: tcp_data_queue+0xd2f/0x4250 tcp_rcv_state_process+0xb1c/0x49d3 tcp_v4_do_rcv+0x2bc/0x790 __release_sock+0x153/0x2d0 release_sock+0x4f/0x170 mptcp_shutdown+0x167/0x4e0 __sys_shutdown+0xe6/0x180 __x64_sys_shutdown+0x50/0x70 do_syscall_64+0x9a/0x370 entry_SYSCALL_64_after_hwframe+0x44/0xa9 2) client is stuck forever in mptcp_sendmsg() because the socket is not TCP_ESTABLISHED crash> bt 4847 PID: 4847 TASK: ffff88814b2fb100 CPU: 1 COMMAND: "gh35" #0 [ffff8881376ff680] __schedule at ffffffff97248da4 #1 [ffff8881376ff778] schedule at ffffffff9724a34f #2 [ffff8881376ff7a0] schedule_timeout at ffffffff97252ba0 #3 [ffff8881376ff8a8] wait_woken at ffffffff958ab4ba #4 [ffff8881376ff940] sk_stream_wait_connect at ffffffff96c2d859 #5 [ffff8881376ffa28] mptcp_sendmsg at ffffffff97207fca #6 [ffff8881376ffbc0] sock_sendmsg at ffffffff96be1b5b #7 [ffff8881376ffbe8] sock_write_iter at ffffffff96be1daa #8 [ffff8881376ffce8] new_sync_write at ffffffff95e5cb52 #9 [ffff8881376ffe50] vfs_write at ffffffff95e6547f #10 [ffff8881376ffe90] ksys_write at ffffffff95e65d26 #11 [ffff8881376fff28] do_syscall_64 at ffffffff956088ba #12 [ffff8881376fff50] entry_SYSCALL_64_after_hwframe at ffffffff9740008c RIP: 00007f126f6956ed RSP: 00007ffc2a320278 RFLAGS: 00000217 RAX: ffffffffffffffda RBX: 0000000020000044 RCX: 00007f126f6956ed RDX: 0000000000000004 RSI: 00000000004007b8 RDI: 0000000000000003 RBP: 00007ffc2a3202a0 R8: 0000000000400720 R9: 0000000000400720 R10: 0000000000400720 R11: 0000000000000217 R12: 00000000004004b0 R13: 00007ffc2a320380 R14: 0000000000000000 R15: 0000000000000000 ORIG_RAX: 0000000000000001 CS: 0033 SS: 002b 3) tcpdump captures show that DSS is exchanged even when MP_CAPABLE handshake didn't complete. $ tcpdump -tnnr bad.pcap IP 127.0.0.1.20000 > 127.0.0.1.20000: Flags [S], seq 3208913911, win 65483, options [mss 65495,sackOK,TS val 3291706876 ecr 3291694721,nop,wscale 7,mptcp capable v1], length 0 IP 127.0.0.1.20000 > 127.0.0.1.20000: Flags [S.], seq 3208913911, ack 3208913912, win 65483, options [mss 65495,sackOK,TS val 3291706876 ecr 3291706876,nop,wscale 7,mptcp capable v1], length 0 IP 127.0.0.1.20000 > 127.0.0.1.20000: Flags [.], ack 1, win 512, options [nop,nop,TS val 3291706876 ecr 3291706876], length 0 IP 127.0.0.1.20000 > 127.0.0.1.20000: Flags [F.], seq 1, ack 1, win 512, options [nop,nop,TS val 3291707876 ecr 3291706876,mptcp dss fin seq 0 subseq 0 len 1,nop,nop], length 0 IP 127.0.0.1.20000 > 127.0.0.1.20000: Flags [.], ack 2, win 512, options [nop,nop,TS val 3291707876 ecr 3291707876], length 0 force a fallback to TCP in these cases, and adjust the main socket state to avoid hanging in mptcp_sendmsg(). Closes: #35 Reported-by: Christoph Paasch <cpaasch@apple.com> Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com>

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:935 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/5 1 lock held by swapper/5/0: #0: ffff80001002bd90 (samples/ftrace/sample-trace-array.c:38){+.-.}-{0:0}, at: call_timer_fn+0x8/0x3e0 CPU: 5 PID: 0 Comm: swapper/5 Not tainted 5.7.0+ #8 Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 Call trace: dump_backtrace+0x0/0x1a0 show_stack+0x20/0x30 dump_stack+0xe4/0x150 ___might_sleep+0x160/0x200 __might_sleep+0x58/0x90 __mutex_lock+0x64/0x948 mutex_lock_nested+0x3c/0x58 __ftrace_set_clr_event+0x44/0x88 trace_array_set_clr_event+0x24/0x38 mytimer_handler+0x34/0x40 [sample_trace_array] mutex_lock() will be called in interrupt context, using workqueue to fix it. Link: https://lkml.kernel.org/r/20200610011244.2209486-1-wangkefeng.wang@huawei.com Cc: stable@vger.kernel.org Fixes: 89ed424 ("tracing: Sample module to demonstrate kernel access to Ftrace instances.") Reviewed-by: Divya Indi <divya.indi@oracle.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Petr Machata says: ==================== selftests: Fixes for kernel CI As discussed on the bi-weekly call on Jan 30, and in mailing around kernel CI effort, some changes are desirable in the suite of forwarding selftests the better to work with the CI tooling. Namely: - The forwarding selftests use a configuration file where names of interfaces are defined and various variables can be overridden. There is also forwarding.config.sample that users can use as a template to refer to when creating the config file. What happens a fair bit is that users either do not know about this at all, or simply forget, and are confused by cryptic failures about interfaces that cannot be created. In patches #1 - #3 have lib.sh just be the single source of truth with regards to which variables exist. That includes the topology variables which were previously only in the sample file, and any "tweak variables", such as what tools to use, sleep times, etc. forwarding.config.sample then becomes just a placeholder with a couple examples. Unless specific HW should be exercised, or specific tools used, the defaults are usually just fine. - Several net/forwarding/ selftests (and one net/ one) cannot be run on veth pairs, they need an actual HW interface to run on. They are generic in the sense that any capable HW should pass them, which is why they have been put to net/forwarding/ as opposed to drivers/net/, but they do not generalize to veth. The fact that these tests are in net/forwarding/, but still complaining when run, is confusing. In patches #4 - #6 move these tests to a new directory drivers/net/hw. - The following patches extend the codebase to handle well test results other than pass and fail. Patch #7 is preparatory. It converts several log_test_skip to XFAIL, so that tests do not spuriously end up returning non-0 when they are not supposed to. In patches #8 - #10, introduce some missing ksft constants, then support having those constants in RET, and then finally in EXIT_STATUS. - The traffic scheduler tests generate a large amount of network traffic to test the behavior of the scheduler. This demands a relatively high-performance computer. On slow machines, such as with a debugging kernel, the test would spuriously fail. It can still be useful to "go through the motions" though, to possibly catch bugs in setup of the scheduler graph and passing packets around. Thus we still want to run the tests, just with lowered demands. To that end, in patches #11 - #12, introduce an environment variable KSFT_MACHINE_SLOW, with obvious meaning. Tests can then make checks more lenient, such as mark failures as XFAIL. A helper, xfail_on_slow, is provided to mark performance-sensitive parts of the selftest. - In patch #13, use a similar mechanism to mark a NH group stats selftest to XFAIL HW stats tests when run on VETH pairs. - All these changes complicate the hitherto straightforward logging and checking logic, so in patch #14, add a selftest that checks this functionality in lib.sh. v1 (vs. an RFC circulated through linux-kselftest): - Patch #9: - Clarify intended usage by s/set_ret/ret_set_ksft_status/, s/nret/ksft_status/ ==================== Link: https://lore.kernel.org/r/cover.1711464583.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The driver creates /sys/kernel/debug/dri/0/mob_ttm even when the corresponding ttm_resource_manager is not allocated. This leads to a crash when trying to read from this file. Add a check to create mob_ttm, system_mob_ttm, and gmr_ttm debug file only when the corresponding ttm_resource_manager is allocated. crash> bt PID: 3133409 TASK: ffff8fe4834a5000 CPU: 3 COMMAND: "grep" #0 [ffffb954506b3b20] machine_kexec at ffffffffb2a6bec3 #1 [ffffb954506b3b78] __crash_kexec at ffffffffb2bb598a #2 [ffffb954506b3c38] crash_kexec at ffffffffb2bb68c1 #3 [ffffb954506b3c50] oops_end at ffffffffb2a2a9b1 #4 [ffffb954506b3c70] no_context at ffffffffb2a7e913 #5 [ffffb954506b3cc8] __bad_area_nosemaphore at ffffffffb2a7ec8c #6 [ffffb954506b3d10] do_page_fault at ffffffffb2a7f887 #7 [ffffb954506b3d40] page_fault at ffffffffb360116e [exception RIP: ttm_resource_manager_debug+0x11] RIP: ffffffffc04afd11 RSP: ffffb954506b3df0 RFLAGS: 00010246 RAX: ffff8fe41a6d1200 RBX: 0000000000000000 RCX: 0000000000000940 RDX: 0000000000000000 RSI: ffffffffc04b4338 RDI: 0000000000000000 RBP: ffffb954506b3e08 R8: ffff8fee3ffad000 R9: 0000000000000000 R10: ffff8fe41a76a000 R11: 0000000000000001 R12: 00000000ffffffff R13: 0000000000000001 R14: ffff8fe5bb6f3900 R15: ffff8fe41a6d1200 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffffb954506b3e00] ttm_resource_manager_show at ffffffffc04afde7 [ttm] #9 [ffffb954506b3e30] seq_read at ffffffffb2d8f9f3 RIP: 00007f4c4eda8985 RSP: 00007ffdbba9e9f8 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 000000000037e000 RCX: 00007f4c4eda8985 RDX: 000000000037e000 RSI: 00007f4c41573000 RDI: 0000000000000003 RBP: 000000000037e000 R8: 0000000000000000 R9: 000000000037fe30 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4c41573000 R13: 0000000000000003 R14: 00007f4c41572010 R15: 0000000000000003 ORIG_RAX: 0000000000000000 CS: 0033 SS: 002b Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Fixes: af4a25b ("drm/vmwgfx: Add debugfs entries for various ttm resource managers") Cc: <stable@vger.kernel.org> Reviewed-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240312093551.196609-1-jfalempe@redhat.com

Petr Machata says: ==================== selftests: Assortment of fixes This is a loose follow-up to the Kernel CI patchset posted recently. It contains various fixes that were supposed to be part of said patchset, but didn't fit due to its size. The latter 4 patches were written independently of the CI effort, but again didn't fit in their intended patchsets. - Patch #1 unifies code of two very similar looking functions, busywait() and slowwait(). - Patch #2 adds sanity checks around the setting of NETIFS, which carries list of interfaces to run on. - Patch #3 changes bail_on_lldpad() to SKIP instead of FAILing. - Patches #4 to #7 fix issues in selftests. - Patches #8 to #10 add topology diagrams to several selftests. This should have been part of the mlxsw leg of NH group stats patches, but again, it did not fit in due to size. ==================== Link: https://lore.kernel.org/r/cover.1712940759.git.petrm@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <lei.chen@smartx.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

At current x1e80100 interface table, interface #3 is wrongly connected to DP controller #0 and interface #4 wrongly connected to DP controller #2. Fix this problem by connect Interface #3 to DP controller #0 and interface #4 connect to DP controller #1. Also add interface #6, #7 and #8 connections to DP controller to complete x1e80100 interface table. Changs in V3: -- add v2 changes log Changs in V2: -- add x1e80100 to subject -- add Fixes Fixes: e3b1f36 ("drm/msm/dpu: Add X1E80100 support") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/585549/ Link: https://lore.kernel.org/r/1711741586-9037-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>

Wen Gu says: ==================== net/smc: SMC intra-OS shortcut with loopback-ism This patch set acts as the second part of the new version of [1] (The first part can be referred from [2]), the updated things of this version are listed at the end. - Background SMC-D is now used in IBM z with ISM function to optimize network interconnect for intra-CPC communications. Inspired by this, we try to make SMC-D available on the non-s390 architecture through a software-implemented Emulated-ISM device, that is the loopback-ism device here, to accelerate inter-process or inter-containers communication within the same OS instance. - Design This patch set includes 3 parts: - Patch #1: some prepare work for loopback-ism. - Patch #2-#7: implement loopback-ism device and adapt SMC-D for it. loopback-ism now serves only SMC and no userspace interfaces exposed. - Patch #8-#11: memory copy optimization for intra-OS scenario. The loopback-ism device is designed as an ISMv2 device and not be limited to a specific net namespace, ends of both inter-process connection (1/1' in diagram below) or inter-container connection (2/2' in diagram below) can find the same available loopback-ism and choose it during the CLC handshake. Container 1 (ns1) Container 2 (ns2) +-----------------------------------------+ +-------------------------+ | +-------+ +-------+ +-------+ | | +-------+ | | | App A | | App B | | App C | | | | App D |<-+ | | +-------+ +---^---+ +-------+ | | +-------+ |(2') | | |127.0.0.1 (1')| |192.168.0.11 192.168.0.12| | | (1)| +--------+ | +--------+ |(2) | | +--------+ +--------+ | | `-->| lo |-` | eth0 |<-` | | | lo | | eth0 | | +---------+--|---^-+---+-----|--+---------+ +-+--------+---+-^------+-+ | | | | Kernel | | | | +----+-------v---+-----------v----------------------------------+---+----+ | | TCP | | | | | | | +--------------------------------------------------------------+ | | | | +--------------+ | | | smc loopback | | +---------------------------+--------------+-----------------------------+ loopback-ism device creates DMBs (shared memory) for each connection peer. Since data transfer occurs within the same kernel, the sndbuf of each peer is only a descriptor and point to the same memory region as peer DMB, so that the data copy from sndbuf to peer DMB can be avoided in loopback-ism case. Container 1 (ns1) Container 2 (ns2) +-----------------------------------------+ +-------------------------+ | +-------+ | | +-------+ | | | App C |-----+ | | | App D | | | +-------+ | | | +-^-----+ | | | | | | | | (2) | | | (2') | | | | | | | | +---------------|-------------------------+ +----------|--------------+ | | Kernel | | +---------------|-----------------------------------------|--------------+ | +--------+ +--v-----+ +--------+ +--------+ | | |dmb_desc| |snd_desc| |dmb_desc| |snd_desc| | | +-----|--+ +--|-----+ +-----|--+ +--------+ | | +-----|--+ | +-----|--+ | | | DMB C | +---------------------------------| DMB D | | | +--------+ +--------+ | | | | +--------------+ | | | smc loopback | | +---------------------------+--------------+-----------------------------+ - Benchmark Test * Test environments: - VM with Intel Xeon Platinum 8 core 2.50GHz, 16 GiB mem. - SMC sndbuf/DMB size 1MB. * Test object: - TCP: run on TCP loopback. - SMC lo: run on SMC loopback-ism. 1. ipc-benchmark (see [3]) - ./<foo> -c 1000000 -s 100 TCP SMC-lo Message rate (msg/s) 84991 151293(+78.01%) 2. sockperf - serv: <smc_run> sockperf sr --tcp - clnt: <smc_run> sockperf { tp | pp } --tcp --msg-size={ 64000 for tp | 14 for pp } -i 127.0.0.1 -t 30 TCP SMC-lo Bandwidth(MBps) 5033.569 7987.732(+58.69%) Latency(us) 5.986 3.398(-43.23%) 3. nginx/wrk - serv: <smc_run> nginx - clnt: <smc_run> wrk -t 8 -c 1000 -d 30 http://127.0.0.1:80 TCP SMC-lo Requests/s 187951.76 267107.90(+42.12%) 4. redis-benchmark - serv: <smc_run> redis-server - clnt: <smc_run> redis-benchmark -h 127.0.0.1 -q -t set,get -n 400000 -c 200 -d 1024 TCP SMC-lo GET(Requests/s) 86132.64 118133.49(+37.15%) SET(Requests/s) 87374.40 122887.86(+40.65%) Change log: v7->v6 - Patch #2: minor: remove unnecessary 'return' of inline smc_loopback_exit(). - Patch #10: minor: directly return 0 instead of 'rc' in smcd_cdc_msg_send(). - all: collect the Reviewed-by tags. v6->RFC v5 Link: https://lore.kernel.org/netdev/20240414040304.54255-1-guwen@linux.alibaba.com/ - Patch #2: make the use of CONFIG_SMC_LO cleaner. - Patch #5: mark some smcd_ops that loopback-ism doesn't support as optional and check for the support when they are called. - Patch #7: keep loopback-ism at the beginning of the SMC-D device list. - Some expression changes in commit logs and comments. RFC v5->RFC v4: Link: https://lore.kernel.org/netdev/20240324135522.108564-1-guwen@linux.alibaba.com/ - Patch #2: minor changes in description of config SMC_LO and comments. - Patch #10: minor changes in comments and if(smc_ism_support_dmb_nocopy()) check in smcd_cdc_msg_send(). - Patch #3: change smc_lo_generate_id() to smc_lo_generate_ids() and SMC_LO_CHID to SMC_LO_RESERVED_CHID. - Patch #5: memcpy while holding the ldev->dmb_ht_lock. - Some expression changes in commit logs. RFC v4->v3: Link: https://lore.kernel.org/netdev/20240317100545.96663-1-guwen@linux.alibaba.com/ - The merge window of v6.9 is open, so post this series as an RFC. - Patch #6: since some information fed back by smc_nl_handle_smcd_dev() dose not apply to Emulated-ISM (including loopback-ism here), loopback-ism is not exposed through smc netlink for the time being. we may refactor this part when smc netlink interface is updated. v3->v2: Link: https://lore.kernel.org/netdev/20240312142743.41406-1-guwen@linux.alibaba.com/ - Patch #11: use tasklet_schedule(&conn->rx_tsklet) instead of smcd_cdc_rx_handler() to avoid possible recursive locking of conn->send_lock and use {read|write}_lock_bh() to acquire dmb_ht_lock. v2->v1: Link: https://lore.kernel.org/netdev/20240307095536.29648-1-guwen@linux.alibaba.com/ - All the patches: changed the term virtual-ISM to Emulated-ISM as defined by SMCv2.1. - Patch #3: optimized the description of SMC_LO config. Avoid exposing loopback-ism to sysfs and remove all the knobs until future definition clear. - Patch #3: try to make lockdep happy by using read_lock_bh() in smc_lo_move_data(). - Patch #6: defaultly use physical contiguous DMB buffers. - Patch #11: defaultly enable DMB no-copy for loopback-ism and free the DMB in unregister_dmb or detach_dmb when dmb_node->refcnt reaches 0, instead of using wait_event to keep waiting in unregister_dmb. v1->RFC: Link: https://lore.kernel.org/netdev/20240111120036.109903-1-guwen@linux.alibaba.com/ - Patch #9: merge rx_bytes and tx_bytes as xfer_bytes statistics: /sys/devices/virtual/smc/loopback-ism/xfer_bytes - Patch #10: add support_dmb_nocopy operation to check if SMC-D device supports merging sndbuf with peer DMB. - Patch #13 & #14: introduce loopback-ism device control of DMB memory type and control of whether to merge sndbuf and DMB. They can be respectively set by: /sys/devices/virtual/smc/loopback-ism/dmb_type /sys/devices/virtual/smc/loopback-ism/dmb_copy The motivation for these two control is that a performance bottleneck was found when using vzalloced DMB and sndbuf is merged with DMB, and there are many CPUs and CONFIG_HARDENED_USERCOPY is set [4]. The bottleneck is caused by the lock contention in vmap_area_lock [5] which is involved in memcpy_from_msg() or memcpy_to_msg(). Currently, Uladzislau Rezki is working on mitigating the vmap lock contention [6]. It has significant effects, but using virtual memory still has additional overhead compared to using physical memory. So this new version provides controls of dmb_type and dmb_copy to suit different scenarios. - Some minor changes and comments improvements. RFC->old version([1]): Link: https://lore.kernel.org/netdev/1702214654-32069-1-git-send-email-guwen@linux.alibaba.com/ - Patch #1: improve the loopback-ism dump, it shows as follows now: # smcd d FID Type PCI-ID PCHID InUse #LGs PNET-ID 0000 0 loopback-ism ffff No 0 - Patch #3: introduce the smc_ism_set_v2_capable() helper and set smc_ism_v2_capable when ISMv2 or virtual ISM is registered, regardless of whether there is already a device in smcd device list. - Patch #3: loopback-ism will be added into /sys/devices/virtual/smc/loopback-ism/. - Patch #8: introduce the runtime switch /sys/devices/virtual/smc/loopback-ism/active to activate or deactivate the loopback-ism. - Patch #9: introduce the statistics of loopback-ism by /sys/devices/virtual/smc/loopback-ism/{{tx|rx}_tytes|dmbs_cnt}. - Some minor changes and comments improvements. [1] https://lore.kernel.org/netdev/1695568613-125057-1-git-send-email-guwen@linux.alibaba.com/ [2] https://lore.kernel.org/netdev/20231219142616.80697-1-guwen@linux.alibaba.com/ [3] https://github.com/goldsborough/ipc-bench [4] https://lore.kernel.org/all/3189e342-c38f-6076-b730-19a6efd732a5@linux.alibaba.com/ [5] https://lore.kernel.org/all/238e63cd-e0e8-4fbf-852f-bc4d5bc35d5a@linux.alibaba.com/ [6] https://lore.kernel.org/all/20240102184633.748113-1-urezki@gmail.com/ ==================== Link: https://lore.kernel.org/r/20240428060738.60843-1-guwen@linux.alibaba.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

…/git/pablo/gtp Pablo neira Ayuso says: ==================== gtp pull request 24-05-07 This v3 includes: - fix for clang uninitialized variable per Jakub. - address Smatch and Coccinelle reports per Simon - remove inline in new IPv6 support per Simon - fix memleaks in netlink control plane per Simon -o- The following patchset contains IPv6 GTP driver support for net-next, this also includes IPv6 over IPv4 and vice-versa: Patch #1 removes a unnecessary stack variable initialization in the socket routine. Patch #2 deals with GTP extension headers. This variable length extension header to decapsulate packets accordingly. Otherwise, packets are dropped when these extension headers are present which breaks interoperation with other non-Linux based GTP implementations. Patch #3 prepares for IPv6 support by moving IPv4 specific fields in PDP context objects to a union. Patch #4 adds IPv6 support while retaining backward compatibility. Three new attributes allows to declare an IPv6 GTP tunnel GTPA_FAMILY, GTPA_PEER_ADDR6 and GTPA_MS_ADDR6 as well as IFLA_GTP_LOCAL6 to declare the IPv6 GTP UDP socket. Up to this patch, only IPv6 outer in IPv6 inner is supported. Patch #5 uses IPv6 address /64 prefix for UE/MS in the inner headers. Unlike IPv4, which provides a 1:1 mapping between UE/MS, IPv6 tunnel encapsulates traffic for /64 address as specified by 3GPP TS. Patch has been split from Patch #4 to highlight this behaviour. Patch #6 passes up IPv6 link-local traffic, such as IPv6 SLAAC, for handling to userspace so they are handled as control packets. Patch #7 prepares to allow for GTP IPv4 over IPv6 and vice-versa by moving IP specific debugging out of the function to build IPv4 and IPv6 GTP packets. Patch #8 generalizes TOS/DSCP handling following similar approach as in the existing iptunnel infrastructure. Patch #9 adds a helper function to build an IPv4 GTP packet in the outer header. Patch #10 adds a helper function to build an IPv6 GTP packet in the outer header. Patch #11 adds support for GTP IPv4-over-IPv6 and vice-versa. Patch #12 allows to use the same TID/TEID (tunnel identifier) for inner IPv4 and IPv6 packets for better UE/MS dual stack integration. This series integrates with the osmocom.org project CI and TTCN-3 test infrastructure (Oliver Smith) as well as the userspace libgtpnl library. Thanks to Harald Welte, Oliver Smith and Pau Espin for reviewing and providing feedback through the osmocom.org redmine platform to make this happen. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

…rnel/git/netfilter/nf-next Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: Patch #1 skips transaction if object type provides no .update interface. Patch #2 skips NETDEV_CHANGENAME which is unused. Patch #3 enables conntrack to handle Multicast Router Advertisements and Multicast Router Solicitations from the Multicast Router Discovery protocol (RFC4286) as untracked opposed to invalid packets. From Linus Luessing. Patch #4 updates DCCP conntracker to mark invalid as invalid, instead of dropping them, from Jason Xing. Patch #5 uses NF_DROP instead of -NF_DROP since NF_DROP is 0, also from Jason. Patch #6 removes reference in netfilter's sysctl documentation on pickup entries which were already removed by Florian Westphal. Patch #7 removes check for IPS_OFFLOAD flag to disable early drop which allows to evict entries from the conntrack table, also from Florian. Patches #8 to #16 updates nf_tables pipapo set backend to allocate the datastructure copy on-demand from preparation phase, to better deal with OOM situations where .commit step is too late to fail. Series from Florian Westphal. Patch #17 adds a selftest with packetdrill to cover conntrack TCP state transitions, also from Florian. Patch #18 use GFP_KERNEL to clone elements from control plane to avoid quick atomic reserves exhaustion with large sets, reporter refers to million entries magnitude. * tag 'nf-next-24-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: allow clone callbacks to sleep selftests: netfilter: add packetdrill based conntrack tests netfilter: nft_set_pipapo: remove dirty flag netfilter: nft_set_pipapo: move cloning of match info to insert/removal path netfilter: nft_set_pipapo: prepare pipapo_get helper for on-demand clone netfilter: nft_set_pipapo: merge deactivate helper into caller netfilter: nft_set_pipapo: prepare walk function for on-demand clone netfilter: nft_set_pipapo: prepare destroy function for on-demand clone netfilter: nft_set_pipapo: make pipapo_clone helper return NULL netfilter: nft_set_pipapo: move prove_locking helper around netfilter: conntrack: remove flowtable early-drop test netfilter: conntrack: documentation: remove reference to non-existent sysctl netfilter: use NF_DROP instead of -NF_DROP netfilter: conntrack: dccp: try not to drop skb in conntrack netfilter: conntrack: fix ct-state for ICMPv6 Multicast Router Discovery netfilter: nf_tables: remove NETDEV_CHANGENAME from netdev chain event handler netfilter: nf_tables: skip transaction if update object is not implemented ==================== Link: https://lore.kernel.org/r/20240512161436.168973-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ui_browser__show() is capturing the input title that is stack allocated memory in hist_browser__run(). Avoid a use after return by strdup-ing the string. Committer notes: Further explanation from Ian Rogers: My command line using tui is: $ sudo bash -c 'rm /tmp/asan.log*; export ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a sleep 1; /tmp/perf/perf mem report' I then go to the perf annotate view and quit. This triggers the asan error (from the log file): ``` ==1254591==ERROR: AddressSanitizer: stack-use-after-return on address 0x7f2813331920 at pc 0x7f28180 65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10 READ of size 80 at 0x7f2813331920 thread T0 #0 0x7f2818065990 in __interceptor_strlen ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461 #1 0x7f2817698251 in SLsmg_write_wrapped_string (/lib/x86_64-linux-gnu/libslang.so.2+0x98251) #2 0x7f28176984b9 in SLsmg_write_nstring (/lib/x86_64-linux-gnu/libslang.so.2+0x984b9) #3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60 #4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266 #5 0x55c94045c776 in ui_browser__show ui/browser.c:288 #6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206 #7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458 #8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412 #9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527 #10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613 #11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661 #12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671 #13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141 #14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805 #15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374 #16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516 #17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350 #18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403 #19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447 #20 0x55c9400e53ad in main tools/perf/perf.c:561 #21 0x7f28170456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360 #23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId: 84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93) Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746 This frame has 1 object(s): [32, 192) 'title' (line 747) <== Memory access at offset 32 is inside this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork ``` hist_browser__run isn't on the stack so the asan error looks legit. There's no clean init/exit on struct ui_browser so I may be trading a use-after-return for a memory leak, but that seems look a good trade anyway. Fixes: 05e8b08 ("perf ui browser: Stop using 'self'") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Ben Gainey <ben.gainey@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: Li Dong <lidong@vivo.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Paran Lee <p4ranlee@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sun Haiyong <sunhaiyong@loongson.cn> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Yanteng Si <siyanteng@loongson.cn> Cc: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/20240507183545.1236093-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

A system crash like this Failing address: 200000cb7df6f000 TEID: 200000cb7df6f403 Fault in home space mode while using kernel ASCE. AS:00000002d71bc007 R3:00000003fe5b8007 S:000000011a446000 P:000000015660c13d Oops: 0038 ilc:3 [#1] PREEMPT SMP Modules linked in: mlx5_ib ... CPU: 8 PID: 7556 Comm: bash Not tainted 6.9.0-rc7 #8 Hardware name: IBM 3931 A01 704 (LPAR) Krnl PSW : 0704e00180000000 0000014b75e7b606 (ap_parse_bitmap_str+0x10e/0x1f8) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 0000000000000001 ffffffffffffffc0 0000000000000001 00000048f96b75d3 000000cb00000100 ffffffffffffffff ffffffffffffffff 000000cb7df6fce0 000000cb7df6fce0 00000000ffffffff 000000000000002b 00000048ffffffff 000003ff9b2dbc80 200000cb7df6fcd8 0000014bffffffc0 000000cb7df6fbc8 Krnl Code: 0000014b75e7b5fc: a7840047 brc 8,0000014b75e7b68a 0000014b75e7b600: 18b2 lr %r11,%r2 #0000014b75e7b602: a7f4000a brc 15,0000014b75e7b616 >0000014b75e7b606: eb22d00000e6 laog %r2,%r2,0(%r13) 0000014b75e7b60c: a7680001 lhi %r6,1 0000014b75e7b610: 187b lr %r7,%r11 0000014b75e7b612: 84960021 brxh %r9,%r6,0000014b75e7b654 0000014b75e7b616: 18e9 lr %r14,%r9 Call Trace: [<0000014b75e7b606>] ap_parse_bitmap_str+0x10e/0x1f8 ([<0000014b75e7b5dc>] ap_parse_bitmap_str+0xe4/0x1f8) [<0000014b75e7b758>] apmask_store+0x68/0x140 [<0000014b75679196>] kernfs_fop_write_iter+0x14e/0x1e8 [<0000014b75598524>] vfs_write+0x1b4/0x448 [<0000014b7559894c>] ksys_write+0x74/0x100 [<0000014b7618a440>] __do_syscall+0x268/0x328 [<0000014b761a3558>] system_call+0x70/0x98 INFO: lockdep is turned off. Last Breaking-Event-Address: [<0000014b75e7b636>] ap_parse_bitmap_str+0x13e/0x1f8 Kernel panic - not syncing: Fatal exception: panic_on_oops occured when /sys/bus/ap/a[pq]mask was updated with a relative mask value (like +0x10-0x12,+60,-90) with one of the numeric values exceeding INT_MAX. The fix is simple: use unsigned long values for the internal variables. The correct checks are already in place in the function but a simple int for the internal variables was used with the possibility to overflow. Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

When CONFIG_DEBUG_BUGVERBOSE=n, we fail to add necessary padding bytes to bug_table entries, and as a result the last entry in a bug table will be ignored, potentially leading to an unexpected panic(). All prior entries in the table will be handled correctly. The arm64 ABI requires that struct fields of up to 8 bytes are naturally-aligned, with padding added within a struct such that struct are suitably aligned within arrays. When CONFIG_DEBUG_BUGVERPOSE=y, the layout of a bug_entry is: struct bug_entry { signed int bug_addr_disp; // 4 bytes signed int file_disp; // 4 bytes unsigned short line; // 2 bytes unsigned short flags; // 2 bytes } ... with 12 bytes total, requiring 4-byte alignment. When CONFIG_DEBUG_BUGVERBOSE=n, the layout of a bug_entry is: struct bug_entry { signed int bug_addr_disp; // 4 bytes unsigned short flags; // 2 bytes < implicit padding > // 2 bytes } ... with 8 bytes total, with 6 bytes of data and 2 bytes of trailing padding, requiring 4-byte alginment. When we create a bug_entry in assembly, we align the start of the entry to 4 bytes, which implicitly handles padding for any prior entries. However, we do not align the end of the entry, and so when CONFIG_DEBUG_BUGVERBOSE=n, the final entry lacks the trailing padding bytes. For the main kernel image this is not a problem as find_bug() doesn't depend on the trailing padding bytes when searching for entries: for (bug = __start___bug_table; bug < __stop___bug_table; ++bug) if (bugaddr == bug_addr(bug)) return bug; However for modules, module_bug_finalize() depends on the trailing bytes when calculating the number of entries: mod->num_bugs = sechdrs[i].sh_size / sizeof(struct bug_entry); ... and as the last bug_entry lacks the necessary padding bytes, this entry will not be counted, e.g. in the case of a single entry: sechdrs[i].sh_size == 6 sizeof(struct bug_entry) == 8; sechdrs[i].sh_size / sizeof(struct bug_entry) == 0; Consequently module_find_bug() will miss the last bug_entry when it does: for (i = 0; i < mod->num_bugs; ++i, ++bug) if (bugaddr == bug_addr(bug)) goto out; ... which can lead to a kenrel panic due to an unhandled bug. This can be demonstrated with the following module: static int __init buginit(void) { WARN(1, "hello\n"); return 0; } static void __exit bugexit(void) { } module_init(buginit); module_exit(bugexit); MODULE_LICENSE("GPL"); ... which will trigger a kernel panic when loaded: ------------[ cut here ]------------ hello Unexpected kernel BRK exception at EL1 Internal error: BRK handler: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: hello(O+) CPU: 0 PID: 50 Comm: insmod Tainted: G O 6.9.1 #8 Hardware name: linux,dummy-virt (DT) pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : buginit+0x18/0x1000 [hello] lr : buginit+0x18/0x1000 [hello] sp : ffff800080533ae0 x29: ffff800080533ae0 x28: 0000000000000000 x27: 0000000000000000 x26: ffffaba8c4e70510 x25: ffff800080533c30 x24: ffffaba8c4a28a58 x23: 0000000000000000 x22: 0000000000000000 x21: ffff3947c0eab3c0 x20: ffffaba8c4e3f000 x19: ffffaba846464000 x18: 0000000000000006 x17: 0000000000000000 x16: ffffaba8c2492834 x15: 0720072007200720 x14: 0720072007200720 x13: ffffaba8c49b27c8 x12: 0000000000000312 x11: 0000000000000106 x10: ffffaba8c4a0a7c8 x9 : ffffaba8c49b27c8 x8 : 00000000ffffefff x7 : ffffaba8c4a0a7c8 x6 : 80000000fffff000 x5 : 0000000000000107 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff3947c0eab3c0 Call trace: buginit+0x18/0x1000 [hello] do_one_initcall+0x80/0x1c8 do_init_module+0x60/0x218 load_module+0x1ba4/0x1d70 __do_sys_init_module+0x198/0x1d0 __arm64_sys_init_module+0x1c/0x28 invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xd8 el0t_64_sync_handler+0x120/0x12c el0t_64_sync+0x190/0x194 Code: d0ffffe0 910003fd 91000000 9400000b (d4210000) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: BRK handler: Fatal exception Fix this by always aligning the end of a bug_entry to 4 bytes, which is correct regardless of CONFIG_DEBUG_BUGVERBOSE. Fixes: 9fb7410 ("arm64/BUG: Use BRK instruction for generic BUG traps") Signed-off-by: Yuanbin Xie <xieyuanbin1@huawei.com> Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/1716212077-43826-1-git-send-email-xiaojiangfeng@huawei.com Signed-off-by: Will Deacon <will@kernel.org>

…PLES event" This reverts commit 7d1405c. This causes segfaults in some cases, as reported by Milian: ``` sudo /usr/bin/perf record -z --call-graph dwarf -e cycles -e raw_syscalls:sys_enter ls ... [ perf record: Woken up 3 times to write data ] malloc(): invalid next size (unsorted) Aborted ``` Backtrace with GDB + debuginfod: ``` malloc(): invalid next size (unsorted) Thread 1 "perf" received signal SIGABRT, Aborted. __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 Downloading source file /usr/src/debug/glibc/glibc/nptl/pthread_kill.c 44 return INTERNAL_SYSCALL_ERROR_P (ret) ? INTERNAL_SYSCALL_ERRNO (ret) : 0; (gdb) bt #0 __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 #1 0x00007ffff6ea8eb3 in __pthread_kill_internal (threadid=<optimized out>, signo=6) at pthread_kill.c:78 #2 0x00007ffff6e50a30 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/ raise.c:26 #3 0x00007ffff6e384c3 in __GI_abort () at abort.c:79 #4 0x00007ffff6e39354 in __libc_message_impl (fmt=fmt@entry=0x7ffff6fc22ea "%s\n") at ../sysdeps/posix/libc_fatal.c:132 #5 0x00007ffff6eb3085 in malloc_printerr (str=str@entry=0x7ffff6fc5850 "malloc(): invalid next size (unsorted)") at malloc.c:5772 #6 0x00007ffff6eb657c in _int_malloc (av=av@entry=0x7ffff6ff6ac0 <main_arena>, bytes=bytes@entry=368) at malloc.c:4081 #7 0x00007ffff6eb877e in __libc_calloc (n=<optimized out>, elem_size=<optimized out>) at malloc.c:3754 #8 0x000055555569bdb6 in perf_session.do_write_header () #9 0x00005555555a373a in __cmd_record.constprop.0 () #10 0x00005555555a6846 in cmd_record () #11 0x000055555564db7f in run_builtin () #12 0x000055555558ed77 in main () ``` Valgrind memcheck: ``` ==45136== Invalid write of size 8 ==45136== at 0x2B38A5: perf_event__synthesize_id_sample (in /usr/bin/perf) ==45136== by 0x157069: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ==45136== Syscall param write(buf) points to unaddressable byte(s) ==45136== at 0x575953D: __libc_write (write.c:26) ==45136== by 0x575953D: write (write.c:24) ==45136== by 0x35761F: ion (in /usr/bin/perf) ==45136== by 0x357778: writen (in /usr/bin/perf) ==45136== by 0x1548F7: record__write (in /usr/bin/perf) ==45136== by 0x15708A: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ----- Closes: https://lore.kernel.org/linux-perf-users/23879991.0LEYPuXRzz@milian-workstation/ Reported-by: Milian Wolff <milian.wolff@kdab.com> Tested-by: Milian Wolff <milian.wolff@kdab.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: stable@kernel.org # 6.8+ Link: https://lore.kernel.org/lkml/Zl9ksOlHJHnKM70p@x1 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) #5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) #6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) #7 btrfs_sync_file (fs/btrfs/file.c:1933:8) #8 vfs_fsync_range (fs/sync.c:188:9) #9 vfs_fsync (fs/sync.c:202:9) #10 do_fsync (fs/sync.c:212:9) #11 __do_sys_fdatasync (fs/sync.c:225:9) #12 __se_sys_fdatasync (fs/sync.c:223:1) #13 __x64_sys_fdatasync (fs/sync.c:223:1) #14 do_syscall_x64 (arch/x86/entry/common.c:52:14) #15 do_syscall_64 (arch/x86/entry/common.c:83:7) #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>

If we're not in a NAPI softirq context, we need to be careful about how we call napi_consume_skb(), specifically we need to call it with budget==0 to signal to it that we're not in a safe context. This was found while running some configuration stress testing of traffic and a change queue config loop running, and this curious note popped out: [ 4371.402645] BUG: using smp_processor_id() in preemptible [00000000] code: ethtool/20545 [ 4371.402897] caller is napi_skb_cache_put+0x16/0x80 [ 4371.403120] CPU: 25 PID: 20545 Comm: ethtool Kdump: loaded Tainted: G OE 6.10.0-rc3-netnext+ #8 [ 4371.403302] Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 01/23/2021 [ 4371.403460] Call Trace: [ 4371.403613] <TASK> [ 4371.403758] dump_stack_lvl+0x4f/0x70 [ 4371.403904] check_preemption_disabled+0xc1/0xe0 [ 4371.404051] napi_skb_cache_put+0x16/0x80 [ 4371.404199] ionic_tx_clean+0x18a/0x240 [ionic] [ 4371.404354] ionic_tx_cq_service+0xc4/0x200 [ionic] [ 4371.404505] ionic_tx_flush+0x15/0x70 [ionic] [ 4371.404653] ? ionic_lif_qcq_deinit.isra.23+0x5b/0x70 [ionic] [ 4371.404805] ionic_txrx_deinit+0x71/0x190 [ionic] [ 4371.404956] ionic_reconfigure_queues+0x5f5/0xff0 [ionic] [ 4371.405111] ionic_set_ringparam+0x2e8/0x3e0 [ionic] [ 4371.405265] ethnl_set_rings+0x1f1/0x300 [ 4371.405418] ethnl_default_set_doit+0xbb/0x160 [ 4371.405571] genl_family_rcv_msg_doit+0xff/0x130 [...] I found that ionic_tx_clean() calls napi_consume_skb() which calls napi_skb_cache_put(), but before that last call is the note /* Zero budget indicate non-NAPI context called us, like netpoll */ and DEBUG_NET_WARN_ON_ONCE(!in_softirq()); Those are pretty big hints that we're doing it wrong. We can pass a context hint down through the calls to let ionic_tx_clean() know what we're doing so it can call napi_consume_skb() correctly. Fixes: 386e698 ("ionic: Make use napi_consume_skb") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://patch.msgid.link/20240624175015.4520-1-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/20240617095543.6971-1-jack@suse.cz Link: https://lkml.kernel.org/r/20240614145243.8837-1-jack@suse.cz Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Danielle Ratson says: ==================== Add ability to flash modules' firmware CMIS compliant modules such as QSFP-DD might be running a firmware that can be updated in a vendor-neutral way by exchanging messages between the host and the module as described in section 7.2.2 of revision 4.0 of the CMIS standard. According to the CMIS standard, the firmware update process is done using a CDB commands sequence. CDB (Command Data Block Message Communication) reads and writes are performed on memory map pages 9Fh-AFh according to the CMIS standard, section 8.12 of revision 4.0. Add a pair of new ethtool messages that allow: * User space to trigger firmware update of transceiver modules * The kernel to notify user space about the progress of the process The user interface is designed to be asynchronous in order to avoid RTNL being held for too long and to allow several modules to be updated simultaneously. The interface is designed with CMIS compliant modules in mind, but kept generic enough to accommodate future use cases, if these arise. The kernel interface that will implement the firmware update using CDB command will include 2 layers that will be added under ethtool: * The upper layer that will be triggered from the module layer, is cmis_ fw_update. * The lower one is cmis_cdb. In the future there might be more operations to implement using CDB commands. Therefore, the idea is to keep the cmis_cdb interface clean and the cmis_fw_update specific to the cdb commands handling it. The communication between the kernel and the driver will be done using two ethtool operations that enable reading and writing the transceiver module EEPROM. The operation ethtool_ops::get_module_eeprom_by_page, that is already implemented, will be used for reading from the EEPROM the CDB reply, e.g. reading module setting, state, etc. The operation ethtool_ops::set_module_eeprom_by_page, that is added in the current patchset, will be used for writing to the EEPROM the CDB command such as start firmware image, run firmware image, etc. Therefore in order for a driver to implement module flashing, that driver needs to implement the two functions mentioned above. Patchset overview: Patch #1-#2: Implement the EEPROM writing in mlxsw. Patch #3: Define the interface between the kernel and user space. Patch #4: Add ability to notify the flashing firmware progress. Patch #5: Veto operations during flashing. Patch #6: Add extended compliance codes. Patch #7: Add the cdb layer. Patch #8: Add the fw_update layer. Patch #9: Add ability to flash transceiver modules' firmware. v8: Patch #7: * In the ethtool_cmis_wait_for_cond() evaluate the condition once more to decide if the error code should be -ETIMEDOUT or something else. * s/netdev_err/netdev_err_once. v7: Patch #4: * Return -ENOMEM instead of PTR_ERR(attr) on ethnl_module_fw_flash_ntf_put_err(). Patch #9: * Fix Warning for not unlocking the spin_lock in the error flow on module_flash_fw_work_list_add(). * Avoid the fall-through on ethnl_sock_priv_destroy(). v6: * Squash some of the last patch to patch #5 and patch #9. Patch #3: * Add paragraph in .rst file. Patch #4: * Reserve '1' more place on SKB for NUL terminator in the error message string. * Add more prints on error flow, re-write the printing function and add ethnl_module_fw_flash_ntf_put_err(). * Change the communication method so notification will be sent in unicast instead of multicast. * Add new 'struct ethnl_module_fw_flash_ntf_params' that holds the relevant info for unicast communication and use it to send notification to the specific socket. * s/nla_put_u64_64bit/nla_put_uint/ Patch #7: * In ethtool_cmis_cdb_init(), Use 'const' for the 'params' parameter. Patch #8: * Add a list field to struct ethtool_module_fw_flash for module_fw_flash_work_list that will be presented in the next patch. * Move ethtool_cmis_fw_update() cleaning to a new function that will be represented in the next patch. * Move some of the fields in struct ethtool_module_fw_flash to a separate struct, so ethtool_cmis_fw_update() will get only the relevant parameters for it. * Edit the relevant functions to get the relevant params for them. * s/CMIS_MODULE_READY_MAX_DURATION_USEC/CMIS_MODULE_READY_MAX_DURATION_MSEC Patch #9: * Add a paragraph in the commit message. * Rename labels in module_flash_fw_schedule(). * Add info to genl_sk_priv_*() and implement the relevant callbacks, in order to handle properly a scenario of closing the socket from user space before the work item was ended. * Add a list the holds all the ethtool_module_fw_flash struct that corresponds to the in progress work items. * Add a new enum for the socket types. * Use both above to identify a flashing socket, add it to the list and when closing socket affect only the flashing type. * Create a new function that will get the work item instead of ethtool_cmis_fw_update(). * Edit the relevant functions to get the relevant params for them. * The new function will call the old ethtool_cmis_fw_update(), and do the cleaning, so the existence of the list should be completely isolated in module.c. =================== Signed-off-by: David S. Miller <davem@davemloft.net>

Petr Machata says: ==================== selftest: Clean-up and stabilize mirroring tests The mirroring selftests work by sending ICMP traffic between two hosts. Along the way, this traffic is mirrored to a gretap netdevice, and counter taps are then installed strategically along the path of the mirrored traffic to verify the mirroring took place. The problem with this is that besides mirroring the primary traffic, any other service traffic is mirrored as well. At the same time, because the tests need to work in HW-offloaded scenarios, the ability of the device to do arbitrary packet inspection should not be taken for granted. Most tests therefore simply use matchall, one uses flower to match on IP address. As a result, the selftests are noisy. mirror_test() accommodated this noisiness by giving the counters an allowance of several packets. But that only works up to a point, and on busy systems won't be always enough. In this patch set, clean up and stabilize the mirroring selftests. The original intention was to port the tests over to UDP, but the logic of ICMP ends up being so entangled in the mirroring selftests that the changes feel overly invasive. Instead, ICMP is kept, but where possible, we match on ICMP message type, thus filtering out hits by other ICMP messages. Where this is not practical (where the counter tap is put on a device that carries encapsulated packets), switch the counter condition to _at least_ X observed packets. This is less robust, but barely so -- probably the only scenario that this would not catch is something like erroneous packet duplication, which would hopefully get caught by the numerous other tests in this extensive suite. - Patches #1 to #3 clean up parameters at various helpers. - Patches #4 to #6 stabilize the mirroring selftests as described above. - Mirroring tests currently allow testing SW datapath even on HW netdevices by trapping traffic to the SW datapath. This complicates the tests a bit without a good reason: to test SW datapath, just run the selftests on the veth topology. Thus in patch #7, drop support for this dual SW/HW testing. - At this point, some cleanups were either made possible by the previous patches, or were always possible. In patches #8 to #11, realize these cleanups. - In patch #12, fix mlxsw mirror_gre selftest to respect setting TESTS. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Since f663a03 ("bpf, x64: Remove tail call detection"), tail_call_reachable won't be detected in x86 JIT. And, tail_call_reachable is provided by verifier. Therefore, in test_bpf, the tail_call_reachable must be provided in test cases before running. Fix and test: [ 174.828662] test_bpf: #0 Tail call leaf jited:1 170 PASS [ 174.829574] test_bpf: #1 Tail call 2 jited:1 244 PASS [ 174.830363] test_bpf: #2 Tail call 3 jited:1 296 PASS [ 174.830924] test_bpf: #3 Tail call 4 jited:1 719 PASS [ 174.831863] test_bpf: #4 Tail call load/store leaf jited:1 197 PASS [ 174.832240] test_bpf: #5 Tail call load/store jited:1 326 PASS [ 174.832240] test_bpf: #6 Tail call error path, max count reached jited:1 2214 PASS [ 174.835713] test_bpf: #7 Tail call count preserved across function calls jited:1 609751 PASS [ 175.446098] test_bpf: #8 Tail call error path, NULL target jited:1 472 PASS [ 175.447597] test_bpf: #9 Tail call error path, index out of range jited:1 206 PASS [ 175.448833] test_bpf: test_tail_calls: Summary: 10 PASSED, 0 FAILED, [10/10 JIT'ed] Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202406251415.c51865bc-oliver.sang@intel.com Fixes: f663a03 ("bpf, x64: Remove tail call detection") Signed-off-by: Leon Hwang <hffilwlqm@gmail.com> Link: https://lore.kernel.org/r/20240625145351.40072-1-hffilwlqm@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Currently if we request a feature that is not set in the Kernel config we fail silently and return all the available features. However, the man page indicates we should return an EINVAL. We need to fix this issue since we can end up with a Kernel warning should a program request the feature UFFD_FEATURE_WP_UNPOPULATED on a kernel with the config not set with this feature. [ 200.812896] WARNING: CPU: 91 PID: 13634 at mm/memory.c:1660 zap_pte_range+0x43d/0x660 [ 200.820738] Modules linked in: [ 200.869387] CPU: 91 PID: 13634 Comm: userfaultfd Kdump: loaded Not tainted 6.9.0-rc5+ #8 [ 200.877477] Hardware name: Dell Inc. PowerEdge R6525/0N7YGH, BIOS 2.7.3 03/30/2022 [ 200.885052] RIP: 0010:zap_pte_range+0x43d/0x660 Link: https://lkml.kernel.org/r/20240626130513.120193-1-audra@redhat.com Fixes: e06f1e1 ("userfaultfd: wp: enabled write protection in userfaultfd API") Signed-off-by: Audra Mitchell <audra@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rafael Aquini <raquini@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The test thread will start N benchmark kthreads and then schedule out until the test time finished and notify the benchmark kthreads to stop. The benchmark kthreads will keep running until notified to stop. There's a problem with current implementation when the benchmark kthreads number is equal to the CPUs on a non-preemptible kernel: since the scheduler will balance the kthreads across the CPUs and when the test time's out the test thread won't get a chance to be scheduled on any CPU then cannot notify the benchmark kthreads to stop. This can be easily reproduced on a VM (simulated with 16 CPUs) with PREEMPT_VOLUNTARY: estuary:/mnt$ ./dma_map_benchmark -t 16 -s 1 rcu: INFO: rcu_sched self-detected stall on CPU rcu: 10-...!: (5221 ticks this GP) idle=ed24/1/0x4000000000000000 softirq=142/142 fqs=0 rcu: (t=5254 jiffies g=-559 q=45 ncpus=16) rcu: rcu_sched kthread starved for 5255 jiffies! g-559 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=12 rcu: Unless rcu_sched kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_sched state:R running task stack:0 pid:16 tgid:16 ppid:2 flags:0x00000008 Call trace __switch_to+0xec/0x138 __schedule+0x2f8/0x1080 schedule+0x30/0x130 schedule_timeout+0xa0/0x188 rcu_gp_fqs_loop+0x128/0x528 rcu_gp_kthread+0x1c8/0x208 kthread+0xec/0xf8 ret_from_fork+0x10/0x20 Sending NMI from CPU 10 to CPUs 0: NMI backtrace for cpu 0 CPU: 0 PID: 332 Comm: dma-map-benchma Not tainted 6.10.0-rc1-vanilla-LSE #8 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : arm_smmu_cmdq_issue_cmdlist+0x218/0x730 lr : arm_smmu_cmdq_issue_cmdlist+0x488/0x730 sp : ffff80008748b630 x29: ffff80008748b630 x28: 0000000000000000 x27: ffff80008748b780 x26: 0000000000000000 x25: 000000000000bc70 x24: 000000000001bc70 x23: ffff0000c12af080 x22: 0000000000010000 x21: 000000000000ffff x20: ffff80008748b700 x19: ffff0000c12af0c0 x18: 0000000000010000 x17: 0000000000000001 x16: 0000000000000040 x15: ffffffffffffffff x14: 0001ffffffffffff x13: 000000000000ffff x12: 00000000000002f1 x11: 000000000001ffff x10: 0000000000000031 x9 : ffff800080b6b0b8 x8 : ffff0000c2a48000 x7 : 000000000001bc71 x6 : 0001800000000000 x5 : 00000000000002f1 x4 : 01ffffffffffffff x3 : 000000000009aaf1 x2 : 0000000000000018 x1 : 000000000000000f x0 : ffff0000c12af18c Call trace: arm_smmu_cmdq_issue_cmdlist+0x218/0x730 __arm_smmu_tlb_inv_range+0xe0/0x1a8 arm_smmu_iotlb_sync+0xc0/0x128 __iommu_dma_unmap+0x248/0x320 iommu_dma_unmap_page+0x5c/0xe8 dma_unmap_page_attrs+0x38/0x1d0 map_benchmark_thread+0x118/0x2c0 kthread+0xec/0xf8 ret_from_fork+0x10/0x20 Solve this by adding scheduling point in the kthread loop, so if there're other threads in the system they may have a chance to run, especially the thread to notify the test end. However this may degrade the test concurrency so it's recommended to run this on an idle system. Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Acked-by: Barry Song <baohua@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>

When l2tp tunnels use a socket provided by userspace, we can hit lockdep splats like the below when data is transmitted through another (unrelated) userspace socket which then gets routed over l2tp. This issue was previously discussed here: https://lore.kernel.org/netdev/87sfialu2n.fsf@cloudflare.com/ The solution is to have lockdep treat socket locks of l2tp tunnel sockets separately than those of standard INET sockets. To do so, use a different lockdep subclass where lock nesting is possible. ============================================ WARNING: possible recursive locking detected 6.10.0+ #34 Not tainted -------------------------------------------- iperf3/771 is trying to acquire lock: ffff8881027601d8 (slock-AF_INET/1){+.-.}-{2:2}, at: l2tp_xmit_skb+0x243/0x9d0 but task is already holding lock: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(slock-AF_INET/1); lock(slock-AF_INET/1); *** DEADLOCK *** May be due to missing lock nesting notation 10 locks held by iperf3/771: #0: ffff888102650258 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x1a/0x40 #1: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 #2: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 #3: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: process_backlog+0x28b/0x9f0 #4: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0xf9/0x260 #5: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 #6: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 #7: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 #8: ffffffff822ac1e0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0xcc/0x1450 #9: ffff888101f33258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock#2){+...}-{2:2}, at: __dev_queue_xmit+0x513/0x1450 stack backtrace: CPU: 2 UID: 0 PID: 771 Comm: iperf3 Not tainted 6.10.0+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x69/0xa0 dump_stack+0xc/0x20 __lock_acquire+0x135d/0x2600 ? srso_alias_return_thunk+0x5/0xfbef5 lock_acquire+0xc4/0x2a0 ? l2tp_xmit_skb+0x243/0x9d0 ? __skb_checksum+0xa3/0x540 _raw_spin_lock_nested+0x35/0x50 ? l2tp_xmit_skb+0x243/0x9d0 l2tp_xmit_skb+0x243/0x9d0 l2tp_eth_dev_xmit+0x3c/0xc0 dev_hard_start_xmit+0x11e/0x420 sch_direct_xmit+0xc3/0x640 __dev_queue_xmit+0x61c/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 __tcp_send_ack+0x1b8/0x340 tcp_send_ack+0x23/0x30 __tcp_ack_snd_check+0xa8/0x530 ? srso_alias_return_thunk+0x5/0xfbef5 tcp_rcv_established+0x412/0xd70 tcp_v4_do_rcv+0x299/0x420 tcp_v4_rcv+0x1991/0x1e10 ip_protocol_deliver_rcu+0x50/0x220 ip_local_deliver_finish+0x158/0x260 ip_local_deliver+0xc8/0xe0 ip_rcv+0xe5/0x1d0 ? __pfx_ip_rcv+0x10/0x10 __netif_receive_skb_one_core+0xce/0xe0 ? process_backlog+0x28b/0x9f0 __netif_receive_skb+0x34/0xd0 ? process_backlog+0x28b/0x9f0 process_backlog+0x2cb/0x9f0 __napi_poll.constprop.0+0x61/0x280 net_rx_action+0x332/0x670 ? srso_alias_return_thunk+0x5/0xfbef5 ? find_held_lock+0x2b/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 handle_softirqs+0xda/0x480 ? __dev_queue_xmit+0xa2c/0x1450 do_softirq+0xa1/0xd0 </IRQ> <TASK> __local_bh_enable_ip+0xc8/0xe0 ? __dev_queue_xmit+0xa2c/0x1450 __dev_queue_xmit+0xa48/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 tcp_write_xmit+0x766/0x2fb0 ? __entry_text_end+0x102ba9/0x102bad ? srso_alias_return_thunk+0x5/0xfbef5 ? __might_fault+0x74/0xc0 ? srso_alias_return_thunk+0x5/0xfbef5 __tcp_push_pending_frames+0x56/0x190 tcp_push+0x117/0x310 tcp_sendmsg_locked+0x14c1/0x1740 tcp_sendmsg+0x28/0x40 inet_sendmsg+0x5d/0x90 sock_write_iter+0x242/0x2b0 vfs_write+0x68d/0x800 ? __pfx_sock_write_iter+0x10/0x10 ksys_write+0xc8/0xf0 __x64_sys_write+0x3d/0x50 x64_sys_call+0xfaf/0x1f50 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f4d143af992 Code: c3 8b 07 85 c0 75 24 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> e9 01 cc ff ff 41 54 b8 02 00 00 0 RSP: 002b:00007ffd65032058 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f4d143af992 RDX: 0000000000000025 RSI: 00007f4d143f3bcc RDI: 0000000000000005 RBP: 00007f4d143f2b28 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4d143f3bcc R13: 0000000000000005 R14: 0000000000000000 R15: 00007ffd650323f0 </TASK> Fixes: 0b2c597 ("l2tp: close all race conditions in l2tp_tunnel_register()") Suggested-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+6acef9e0a4d1f46c83d4@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6acef9e0a4d1f46c83d4 CC: gnault@redhat.com CC: cong.wang@bytedance.com Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Tom Parkin <tparkin@katalix.com> Link: https://patch.msgid.link/20240806160626.1248317-1-jchapman@katalix.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says: ==================== Unmask upper DSCP bits - part 1 tl;dr - This patchset starts to unmask the upper DSCP bits in the IPv4 flow key in preparation for allowing IPv4 FIB rules to match on DSCP. No functional changes are expected. The TOS field in the IPv4 flow key ('flowi4_tos') is used during FIB lookup to match against the TOS selector in FIB rules and routes. It is currently impossible for user space to configure FIB rules that match on the DSCP value as the upper DSCP bits are either masked in the various call sites that initialize the IPv4 flow key or along the path to the FIB core. In preparation for adding a DSCP selector to IPv4 and IPv6 FIB rules, we need to make sure the entire DSCP value is present in the IPv4 flow key. This patchset starts to unmask the upper DSCP bits in the various places that invoke the core FIB lookup functions directly (patches #1-#7) and in the input route path (patches #8-#12). Future patchsets will do the same in the output route path. No functional changes are expected as commit 1fa3314 ("ipv4: Centralize TOS matching") moved the masking of the upper DSCP bits to the core where 'flowi4_tos' is matched against the TOS selector. ==================== Link: https://patch.msgid.link/20240821125251.1571445-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

…rnel/git/netfilter/nf-next Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following batch contains Netfilter updates for net-next: Patch #1 fix checksum calculation in nfnetlink_queue with SCTP, segment GSO packet since skb_zerocopy() does not support GSO_BY_FRAGS, from Antonio Ojea. Patch #2 extend nfnetlink_queue coverage to handle SCTP packets, from Antonio Ojea. Patch #3 uses consume_skb() instead of kfree_skb() in nfnetlink, from Donald Hunter. Patch #4 adds a dedicate commit list for sets to speed up intra-transaction lookups, from Florian Westphal. Patch #5 skips removal of element from abort path for the pipapo backend, ditching the shadow copy of this datastructure is sufficient. Patch #6 moves nf_ct_netns_get() out of nf_conncount_init() to let users of conncoiunt decide when to enable conntrack, this is needed by openvswitch, from Xin Long. Patch #7 pass context to all nft_parse_register_load() in preparation for the next patch. Patches #8 and #9 reject loads from uninitialized registers from control plane to remove register initialization from datapath. From Florian Westphal. * tag 'nf-next-24-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: don't initialize registers in nft_do_chain() netfilter: nf_tables: allow loads only when register is initialized netfilter: nf_tables: pass context structure to nft_parse_register_load netfilter: move nf_ct_netns_get out of nf_conncount_init netfilter: nf_tables: do not remove elements if set backend implements .abort netfilter: nf_tables: store new sets in dedicated list netfilter: nfnetlink: convert kfree_skb to consume_skb selftests: netfilter: nft_queue.sh: sctp coverage netfilter: nfnetlink_queue: unbreak SCTP traffic ==================== Link: https://patch.msgid.link/20240822221939.157858-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] #8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] #9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 #10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 #11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 #12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c #13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b #14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 #15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 #16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f #17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers. Fixes: d519e17 ("net: export device speed and duplex via sysfs") Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show") Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com> Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says: ==================== Unmask upper DSCP bits - part 2 tl;dr - This patchset continues to unmask the upper DSCP bits in the IPv4 flow key in preparation for allowing IPv4 FIB rules to match on DSCP. No functional changes are expected. Part 1 was merged in commit ("Merge branch 'unmask-upper-dscp-bits-part-1'"). The TOS field in the IPv4 flow key ('flowi4_tos') is used during FIB lookup to match against the TOS selector in FIB rules and routes. It is currently impossible for user space to configure FIB rules that match on the DSCP value as the upper DSCP bits are either masked in the various call sites that initialize the IPv4 flow key or along the path to the FIB core. In preparation for adding a DSCP selector to IPv4 and IPv6 FIB rules, we need to make sure the entire DSCP value is present in the IPv4 flow key. This patchset continues to unmask the upper DSCP bits, but this time in the output route path. Patches #1-#3 unmask the upper DSCP bits in the various places that invoke the core output route lookup functions directly. Patches #4-#6 do the same in three helpers that are widely used in the output path to initialize the TOS field in the IPv4 flow key. The rest of the patches continue to unmask these bits in call sites that invoke the following wrappers around the core lookup functions: Patch #7 - __ip_route_output_key() Patches #8-#12 - ip_route_output_flow() The next patchset will handle the callers of ip_route_output_ports() and ip_route_output_key(). No functional changes are expected as commit 1fa3314 ("ipv4: Centralize TOS matching") moved the masking of the upper DSCP bits to the core where 'flowi4_tos' is matched against the TOS selector. Changes since v1 [1]: * Remove IPTOS_RT_MASK in patch #7 instead of in patch #6 [1] https://lore.kernel.org/netdev/20240827111813.2115285-1-idosch@nvidia.com/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Machon says: ==================== net: microchip: add FDMA library and use it for Sparx5 This patch series is the first of a 2-part series, that adds a new common FDMA library for Microchip switch chips Sparx5 and lan966x. These chips share the same FDMA engine, and as such will benefit from a common library with a common implementation. This also has the benefit of removing a lot open-coded bookkeeping and duplicate code for the two drivers. Additionally, upstreaming efforts for a third chip, lan969x, will begin in the near future. This chip will use the new library too. In this first series, the FDMA library is introduced and used by the Sparx5 switch driver. ################### # Example of use: # ################### - Initialize the rx and tx fdma structs with values for: number of DCB's, number of DB's, channel ID, DB size (data buffer size), and total size of the requested memory. Also provide two callbacks: nextptr_cb() and dataptr_cb() for getting the nextptr and dataptr. - Allocate memory using fdma_alloc_phys() or fdma_alloc_coherent(). - Initialize the DCB's with fdma_dcb_init(). - Add new DCB's with fdma_dcb_add(). - Free memory with fdma_free_phys() or fdma_free_coherent(). ##################### # Patch breakdown: # ##################### Patch #1: introduces library and selects it for Sparx5. Patch #2: includes the fdma_api.h header and removes old symbols. Patch #3: replaces old rx and tx variables with equivalent ones from the fdma struct. Only the variables that can be changed without breaking traffic is changed in this patch. Patch #4: uses the library for allocation of rx buffers. This requires quite a bit of refactoring in this single patch. Patch #5: uses the library for adding DCB's in the rx path. Patch #6: uses the library for freeing rx buffers. Patch #7: uses the library helpers in the rx path. Patch #8: uses the library for allocation of tx buffers. This requires quite a bit of refactoring in this single patch. Patch #9: uses the library for adding DCB's in the tx path. Patch #10: uses the library helpers in the tx path. Patch #11: ditches the existing linked list for storing buffer addresses, and instead uses offsets into contiguous memory. Patch #12: modifies existing rx and tx functions to be direction independent. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

…rnel/git/netfilter/nf-next Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: Patch #1 adds ctnetlink support for kernel side filtering for deletions, from Changliang Wu. Patch #2 updates nft_counter support to Use u64_stats_t, from Sebastian Andrzej Siewior. Patch #3 uses kmemdup_array() in all xtables frontends, from Yan Zhen. Patch #4 is a oneliner to use ERR_CAST() in nf_conntrack instead opencoded casting, from Shen Lichuan. Patch #5 removes unused argument in nftables .validate interface, from Florian Westphal. Patch #6 is a oneliner to correct a typo in nftables kdoc, from Simon Horman. Patch #7 fixes missing kdoc in nftables, also from Simon. Patch #8 updates nftables to handle timeout less than CONFIG_HZ. Patch #9 rejects element expiration if timeout is zero, otherwise it is silently ignored. Patch #10 disallows element expiration larger than timeout. Patch #11 removes unnecessary READ_ONCE annotation while mutex is held. Patch #12 adds missing READ_ONCE/WRITE_ONCE annotation in dynset. Patch #13 annotates data-races around element expiration. Patch #14 allocates timeout and expiration in one single set element extension, they are tighly couple, no reason to keep them separated anymore. Patch #15 updates nftables to interpret zero timeout element as never times out. Note that it is already possible to declare sets with elements that never time out but this generalizes to all kind of set with timeouts. Patch #16 supports for element timeout and expiration updates. * tag 'nf-next-24-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: set element timeout update support netfilter: nf_tables: zero timeout means element never times out netfilter: nf_tables: consolidate timeout extension for elements netfilter: nf_tables: annotate data-races around element expiration netfilter: nft_dynset: annotate data-races around set timeout netfilter: nf_tables: remove annotation to access set timeout while holding lock netfilter: nf_tables: reject expiration higher than timeout netfilter: nf_tables: reject element expiration with no timeout netfilter: nf_tables: elements with timeout below CONFIG_HZ never expire netfilter: nf_tables: Add missing Kernel doc netfilter: nf_tables: Correct spelling in nf_tables.h netfilter: nf_tables: drop unused 3rd argument from validate callback ops netfilter: conntrack: Convert to use ERR_CAST() netfilter: Use kmemdup_array instead of kmemdup for multiple allocation netfilter: nft_counter: Use u64_stats_t for statistic. netfilter: ctnetlink: support CTA_FILTER for flush ==================== Link: https://patch.msgid.link/20240905232920.5481-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Machon says: ==================== net: lan966x: use the newly introduced FDMA library This patch series is the second of a 2-part series [1], that adds a new common FDMA library for Microchip switch chips Sparx5 and lan966x. These chips share the same FDMA engine, and as such will benefit from a common library with a common implementation. This also has the benefit of removing a lot of open-coded bookkeeping and duplicate code for the two drivers. In this second series, the FDMA library will be taken into use by the lan966x switch driver. ################### # Example of use: # ################### - Initialize the rx and tx fdma structs with values for: number of DCB's, number of DB's, channel ID, DB size (data buffer size), and total size of the requested memory. Also provide two callbacks: nextptr_cb() and dataptr_cb() for getting the nextptr and dataptr. - Allocate memory using fdma_alloc_phys() or fdma_alloc_coherent(). - Initialize the DCB's with fdma_dcb_init(). - Add new DCB's with fdma_dcb_add(). - Free memory with fdma_free_phys() or fdma_free_coherent(). ##################### # Patch breakdown: # ##################### Patch #1: select FDMA library for lan966x. Patch #2: includes the fdma_api.h header and removes old symbols. Patch #3: replaces old rx and tx variables with equivalent ones from the fdma struct. Only the variables that can be changed without breaking traffic is changed in this patch. Patch #4: uses the library for allocation of rx buffers. This requires quite a bit of refactoring in this single patch. Patch #5: uses the library for adding DCB's in the rx path. Patch #6: uses the library for freeing rx buffers. Patch #7: uses the library for allocation of tx buffers. This requires quite a bit of refactoring in this single patch. Patch #8: uses the library for adding DCB's in the tx path. Patch #9: uses the library helpers in the tx path. Patch #10: ditch last_in_use variable and use library instead. Patch #11: uses library helpers throughout. Patch #12: refactor lan966x_fdma_reload() function. [1] https://lore.kernel.org/netdev/20240902-fdma-sparx5-v1-0-1e7d5e5a9f34@microchip.com/ Signed-off-by: Daniel Machon <daniel.machon@microchip.com> ==================== Link: https://patch.msgid.link/20240905-fdma-lan966x-v1-0-e083f8620165@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Use a dedicated mutex to guard kvm_usage_count to fix a potential deadlock on x86 due to a chain of locks and SRCU synchronizations. Translating the below lockdep splat, CPU1 #6 will wait on CPU0 #1, CPU0 #8 will wait on CPU2 #3, and CPU2 #7 will wait on CPU1 #4 (if there's a writer, due to the fairness of r/w semaphores). CPU0 CPU1 CPU2 1 lock(&kvm->slots_lock); 2 lock(&vcpu->mutex); 3 lock(&kvm->srcu); 4 lock(cpu_hotplug_lock); 5 lock(kvm_lock); 6 lock(&kvm->slots_lock); 7 lock(cpu_hotplug_lock); 8 sync(&kvm->srcu); Note, there are likely more potential deadlocks in KVM x86, e.g. the same pattern of taking cpu_hotplug_lock outside of kvm_lock likely exists with __kvmclock_cpufreq_notifier(): cpuhp_cpufreq_online() | -> cpufreq_online() | -> cpufreq_gov_performance_limits() | -> __cpufreq_driver_target() | -> __target_index() | -> cpufreq_freq_transition_begin() | -> cpufreq_notify_transition() | -> ... __kvmclock_cpufreq_notifier() But, actually triggering such deadlocks is beyond rare due to the combination of dependencies and timings involved. E.g. the cpufreq notifier is only used on older CPUs without a constant TSC, mucking with the NX hugepage mitigation while VMs are running is very uncommon, and doing so while also onlining/offlining a CPU (necessary to generate contention on cpu_hotplug_lock) would be even more unusual. The most robust solution to the general cpu_hotplug_lock issue is likely to switch vm_list to be an RCU-protected list, e.g. so that x86's cpufreq notifier doesn't to take kvm_lock. For now, settle for fixing the most blatant deadlock, as switching to an RCU-protected list is a much more involved change, but add a comment in locking.rst to call out that care needs to be taken when walking holding kvm_lock and walking vm_list. ====================================================== WARNING: possible circular locking dependency detected 6.10.0-smp--c257535a0c9d-pip #330 Tainted: G S O ------------------------------------------------------ tee/35048 is trying to acquire lock: ff6a80eced71e0a8 (&kvm->slots_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x179/0x1e0 [kvm] but task is already holding lock: ffffffffc07abb08 (kvm_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x14a/0x1e0 [kvm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (kvm_lock){+.+.}-{3:3}: __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 kvm_dev_ioctl+0x4fb/0xe50 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #2 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x2e/0xb0 static_key_slow_inc+0x16/0x30 kvm_lapic_set_base+0x6a/0x1c0 [kvm] kvm_set_apic_base+0x8f/0xe0 [kvm] kvm_set_msr_common+0x9ae/0xf80 [kvm] vmx_set_msr+0xa54/0xbe0 [kvm_intel] __kvm_set_msr+0xb6/0x1a0 [kvm] kvm_arch_vcpu_ioctl+0xeca/0x10c0 [kvm] kvm_vcpu_ioctl+0x485/0x5b0 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&kvm->srcu){.+.+}-{0:0}: __synchronize_srcu+0x44/0x1a0 synchronize_srcu_expedited+0x21/0x30 kvm_swap_active_memslots+0x110/0x1c0 [kvm] kvm_set_memslot+0x360/0x620 [kvm] __kvm_set_memory_region+0x27b/0x300 [kvm] kvm_vm_ioctl_set_memory_region+0x43/0x60 [kvm] kvm_vm_ioctl+0x295/0x650 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&kvm->slots_lock){+.+.}-{3:3}: __lock_acquire+0x15ef/0x2e30 lock_acquire+0xe0/0x260 __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 set_nx_huge_pages+0x179/0x1e0 [kvm] param_attr_store+0x93/0x100 module_attr_store+0x22/0x40 sysfs_kf_write+0x81/0xb0 kernfs_fop_write_iter+0x133/0x1d0 vfs_write+0x28d/0x380 ksys_write+0x70/0xe0 __x64_sys_write+0x1f/0x30 x64_sys_call+0x281b/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Cc: Chao Gao <chao.gao@intel.com> Fixes: 0bf5049 ("KVM: Drop kvm_count_lock and instead protect kvm_usage_count with kvm_lock") Cc: stable@vger.kernel.org Reviewed-by: Kai Huang <kai.huang@intel.com> Acked-by: Kai Huang <kai.huang@intel.com> Tested-by: Farrah Chen <farrah.chen@intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-ID: <20240830043600.127750-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Daniel Machon says: ==================== net: sparx5: prepare for lan969x switch driver == Description: This series is the first of a multi-part series, that prepares and adds support for the new lan969x switch driver. The upstreaming efforts is split into multiple series (might change a bit as we go along): 1) Prepare the Sparx5 driver for lan969x (this series) 2) Add support lan969x (same basic features as Sparx5 provides + RGMII, excl. FDMA and VCAP) 3) Add support for lan969x FDMA 4) Add support for lan969x VCAP == Lan969x in short: The lan969x Ethernet switch family [1] provides a rich set of switching features and port configurations (up to 30 ports) from 10Mbps to 10Gbps, with support for RGMII, SGMII, QSGMII, USGMII, and USXGMII, ideal for industrial & process automation infrastructure applications, transport, grid automation, power substation automation, and ring & intra-ring topologies. The LAN969x family is hardware and software compatible and scalable supporting 46Gbps to 102Gbps switch bandwidths. == Preparing Sparx5 for lan969x: The lan969x switch chip reuses many of the IP's of the Sparx5 switch chip, therefore it has been decided to add support through the existing Sparx5 driver, in order to avoid a bunch of duplicate code. However, in order to reuse the Sparx5 switch driver, we have to introduce some mechanisms to handle the chip differences that are there. These mechanisms are: - Platform match data to contain all the differences that needs to be handled (constants, ops etc.) - Register macro indirection layer so that we can reuse the existing register macros. - Function for branching out on platform type where required. In some places we ops out functions and in other places we branch on the chip type. Exactly when we choose one over the other, is an estimate in each case. After this series is applied, the Sparx5 driver will be prepared for lan969x and still function exactly as before. == Patch breakdown: Patch #1 adds private match data Patch #2 adds register macro indirection layer Patch #3-#4 does some preparation work Patch #5-#7 adds chip constants and updates the code to use them Patch #8-#13 adds and uses ops for handling functions differently on the two platforms. Patch #14 adds and uses a macro for branching out on the chip type. Patch #15 (NEW) redefines macros for internal ports and PGID's. [1] https://www.microchip.com/en-us/product/lan9698 To: David S. Miller <davem@davemloft.net> To: Eric Dumazet <edumazet@google.com> To: Jakub Kicinski <kuba@kernel.org> To: Paolo Abeni <pabeni@redhat.com> To: Lars Povlsen <lars.povlsen@microchip.com> To: Steen Hegelund <Steen.Hegelund@microchip.com> To: horatiu.vultur@microchip.com To: jensemil.schulzostergaard@microchip.com To: UNGLinuxDriver@microchip.com To: Richard Cochran <richardcochran@gmail.com> To: horms@kernel.org To: justinstitt@google.com To: gal@nvidia.com To: aakash.r.menon@gmail.com To: jacob.e.keller@intel.com To: ast@fiberby.net Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Daniel Machon <daniel.machon@microchip.com> ==================== Link: https://patch.msgid.link/20241004-b4-sparx5-lan969x-switch-driver-v2-0-d3290f581663@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

pabeni closed this as completed Apr 27, 2020

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

fix possible race in subflow_finish_connect() #8

fix possible race in subflow_finish_connect() #8

pabeni commented Mar 24, 2020

pabeni commented Apr 27, 2020

fix possible race in subflow_finish_connect() #8

fix possible race in subflow_finish_connect() #8

Comments

pabeni commented Mar 24, 2020

pabeni commented Apr 27, 2020