Skip to content

SFP to SMA board for E/O and O/E conversion of signals using SFP telecom optics

Notifications You must be signed in to change notification settings

lgzcoollg/SFP2SMA_2018.03

 
 

Repository files navigation

SFP-2-SMA Board, 2018-03

This is a simple board for opto/electric and electro/optic conversion of RF-signals (up to maybe 500 MHz) using telecom SFP transcievers. The board can be fitted with either BNC or SMA connectors. It has one input which modulates the TX pins of the SFP, and two identical outputs that represent the signal on the RX pins of the SFP.

Some notes from 2018-04: http://www.anderswallin.net/2018/04/500-mhz-sfp-board-v4/

Circuit description

Differential (100 Ohm) signals on the TX+/TX- and RX+/RX- pins of the SFP are converted to single-ended (50 Ohm) signals using Mini-Circuits ADT2-1T transformers. LMH6702 op-amps amplify/buffer all signals. LT1963 and LT3015 low-noise LDOs provide +3V3, +6V, and -6V DC rails. The +3V3 LDO needs heat-sinking, especially with long-range SFPs that have high current draw.

Links to other SFP-boards

About

SFP to SMA board for E/O and O/E conversion of signals using SFP telecom optics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published