Added DVFS CPU hot-plug driver for EXYNOS4x12 #19

ggezer · 2013-04-18T11:27:52Z

Driver launches a repeatitive timer event, and watches policy and fequency changes in order to deploy cpu hot-plugging for power saving.

Have tunables to tune the hotplug policy in minimal level.

TODO: tunables will be exported to sysfs for easy userland reconfiguration.
TODO: anticipation step can be improved.
ISSUES: Current cpuidle driver on EXYNOS have extra "POWER DOWN" state for cpu0 when all other cores are down! So if hotplug driver shuts down all cores except core0, then system tries to put cpu0 into power down mode which results in oops. There are two ways to overcome that: 1- setting cpu_min_count of this hotplug driver's tunable to 2, 2- removing this extra state from exynos cpuidle driver. I choosed the first option to be not intrusive at the moment. However tried second approach and it works fine too.

Driver launches a repeatitive timer event, and watches policy and fequency changes in order to deploy cpu hot-plugging for power saving. Have tunables to tune the hotplug policy in minimal level. TODO: tunables will be exported to sysfs for easy userland reconfiguration. TODO: anticipation step can be improved. ISSUES: Current cpuidle driver on EXYNOS have extra "POWER DOWN" state for cpu0 when all other cores are down! So if hotplug driver shuts down all cores except core0, then system tries to put cpu0 into power down mode which results in oops. There are two ways to overcome that: 1- setting cpu_min_count of this hotplug driver's tunable to 2, 2- removing this extra state from exynos cpuidle driver. I choosed the first option to be not intrusive at the moment. However tried second approach and it works fine too.

Added DVFS CPU hot-plug driver for EXYNOS4x12

…d reasons commit 5cf02d0 upstream. We've had some reports of a deadlock where rpciod ends up with a stack trace like this: PID: 2507 TASK: ffff88103691ab40 CPU: 14 COMMAND: "rpciod/14" #0 [ffff8810343bf2f0] schedule at ffffffff814dabd9 #1 [ffff8810343bf3b8] nfs_wait_bit_killable at ffffffffa038fc04 [nfs] #2 [ffff8810343bf3c8] __wait_on_bit at ffffffff814dbc2f #3 [ffff8810343bf418] out_of_line_wait_on_bit at ffffffff814dbcd8 #4 [ffff8810343bf488] nfs_commit_inode at ffffffffa039e0c1 [nfs] #5 [ffff8810343bf4f8] nfs_release_page at ffffffffa038bef6 [nfs] #6 [ffff8810343bf528] try_to_release_page at ffffffff8110c670 #7 [ffff8810343bf538] shrink_page_list.clone.0 at ffffffff81126271 #8 [ffff8810343bf668] shrink_inactive_list at ffffffff81126638 #9 [ffff8810343bf818] shrink_zone at ffffffff8112788f #10 [ffff8810343bf8c8] do_try_to_free_pages at ffffffff81127b1e #11 [ffff8810343bf958] try_to_free_pages at ffffffff8112812f #12 [ffff8810343bfa08] __alloc_pages_nodemask at ffffffff8111fdad #13 [ffff8810343bfb28] kmem_getpages at ffffffff81159942 #14 [ffff8810343bfb58] fallback_alloc at ffffffff8115a55a #15 [ffff8810343bfbd8] ____cache_alloc_node at ffffffff8115a2d9 #16 [ffff8810343bfc38] kmem_cache_alloc at ffffffff8115b09b #17 [ffff8810343bfc78] sk_prot_alloc at ffffffff81411808 #18 [ffff8810343bfcb8] sk_alloc at ffffffff8141197c #19 [ffff8810343bfce8] inet_create at ffffffff81483ba6 #20 [ffff8810343bfd38] __sock_create at ffffffff8140b4a7 #21 [ffff8810343bfd98] xs_create_sock at ffffffffa01f649b [sunrpc] #22 [ffff8810343bfdd8] xs_tcp_setup_socket at ffffffffa01f6965 [sunrpc] #23 [ffff8810343bfe38] worker_thread at ffffffff810887d0 #24 [ffff8810343bfee8] kthread at ffffffff8108dd96 #25 [ffff8810343bff48] kernel_thread at ffffffff8100c1ca rpciod is trying to allocate memory for a new socket to talk to the server. The VM ends up calling ->releasepage to get more memory, and it tries to do a blocking commit. That commit can't succeed however without a connected socket, so we deadlock. Fix this by setting PF_FSTRANS on the workqueue task prior to doing the socket allocation, and having nfs_release_page check for that flag when deciding whether to do a commit call. Also, set PF_FSTRANS unconditionally in rpc_async_schedule since that function can also do allocations sometimes. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9b469a6 upstream. Add 6 new devices and one modified device, based on information from laptop vendor Windows drivers. Sony provides a driver with two new devices using a Gobi 2k+ layout (1199:68a5 and 1199:68a9). The Sony driver also adds a non-standard QMI/net interface to the already supported 1199:9011 Gobi device. We do not know whether this is an alternate interface number or an additional interface which might be present, but that doesn't really matter. Lenovo provides a driver supporting 4 new devices: - MC7770 (1199:901b) with standard Gobi 2k+ layout - MC7700 (0f3d:68a2) with layout similar to MC7710 - MC7750 (114f:68a2) with layout similar to MC7710 - EM7700 (1199:901c) with layout similar to MC7710 Note regaring the three devices similar to MC7710: The Windows drivers only support interface #8 on these devices. The MC7710 can support QMI/net functions on interface #19 and #20 as well, and this driver is verified to work on interface #19 (a firmware bug is suspected to prevent #20 from working). We do not enable these additional interfaces until they either show up in a Windows driver or are verified to work in some other way. Therefore limiting the new devices to interface #8 for now. [bmork: backported to 3.4: use driver whitelisting] Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Several people reported the warning: "kernel BUG at kernel/timer.c:729!" and the stack trace is: #7 [ffff880214d25c10] mod_timer+501 at ffffffff8106d905 #8 [ffff880214d25c50] br_multicast_del_pg.isra.20+261 at ffffffffa0731d25 [bridge] #9 [ffff880214d25c80] br_multicast_disable_port+88 at ffffffffa0732948 [bridge] #10 [ffff880214d25cb0] br_stp_disable_port+154 at ffffffffa072bcca [bridge] #11 [ffff880214d25ce8] br_device_event+520 at ffffffffa072a4e8 [bridge] #12 [ffff880214d25d18] notifier_call_chain+76 at ffffffff8164aafc #13 [ffff880214d25d50] raw_notifier_call_chain+22 at ffffffff810858f6 #14 [ffff880214d25d60] call_netdevice_notifiers+45 at ffffffff81536aad #15 [ffff880214d25d80] dev_close_many+183 at ffffffff81536d17 #16 [ffff880214d25dc0] rollback_registered_many+168 at ffffffff81537f68 #17 [ffff880214d25de8] rollback_registered+49 at ffffffff81538101 #18 [ffff880214d25e10] unregister_netdevice_queue+72 at ffffffff815390d8 #19 [ffff880214d25e30] __tun_detach+272 at ffffffffa074c2f0 [tun] #20 [ffff880214d25e88] tun_chr_close+45 at ffffffffa074c4bd [tun] #21 [ffff880214d25ea8] __fput+225 at ffffffff8119b1f1 #22 [ffff880214d25ef0] ____fput+14 at ffffffff8119b3fe #23 [ffff880214d25f00] task_work_run+159 at ffffffff8107cf7f #24 [ffff880214d25f30] do_notify_resume+97 at ffffffff810139e1 #25 [ffff880214d25f50] int_signal+18 at ffffffff8164f292 this is due to I forgot to check if mp->timer is armed in br_multicast_del_pg(). This bug is introduced by commit 9f00b2e (bridge: only expire the mdb entry when query is received). Same for __br_mdb_del(). Tested-by: poma <pomidorabelisima@gmail.com> Reported-by: LiYonghua <809674045@qq.com> Reported-by: Robert Hancock <hancockrwd@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

…s struct file The following call chain: ------------------------------------------------------------ nfs4_get_vfs_file - nfsd_open - dentry_open - do_dentry_open - __get_file_write_access - get_write_access - return atomic_inc_unless_negative(&inode->i_writecount) ? 0 : -ETXTBSY; ------------------------------------------------------------ can result in the following state: ------------------------------------------------------------ struct nfs4_file { ... fi_fds = {0xffff880c1fa65c80, 0xffffffffffffffe6, 0x0}, fi_access = {{ counter = 0x1 }, { counter = 0x0 }}, ... ------------------------------------------------------------ 1) First time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is NULL, hence nfsd_open() is called where we get status set to an error and fp->fi_fds[O_WRONLY] to -ETXTBSY. Thus we do not reach nfs4_file_get_access() and fi_access[O_WRONLY] is not incremented. 2) Second time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is NOT NULL (-ETXTBSY), so nfsd_open() is NOT called, but nfs4_file_get_access() IS called and fi_access[O_WRONLY] is incremented. Thus we leave a landmine in the form of the nfs4_file data structure in an incorrect state. 3) Eventually, when __nfs4_file_put_access() is called it finds fi_access[O_WRONLY] being non-zero, it decrements it and calls nfs4_file_put_fd() which tries to fput -ETXTBSY. ------------------------------------------------------------ ... [exception RIP: fput+0x9] RIP: ffffffff81177fa9 RSP: ffff88062e365c90 RFLAGS: 00010282 RAX: ffff880c2b3d99cc RBX: ffff880c2b3d9978 RCX: 0000000000000002 RDX: dead000000100101 RSI: 0000000000000001 RDI: ffffffffffffffe6 RBP: ffff88062e365c90 R8: ffff88041fe797d8 R9: ffff88062e365d58 R10: 0000000000000008 R11: 0000000000000000 R12: 0000000000000001 R13: 0000000000000007 R14: 0000000000000000 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #9 [ffff88062e365c98] __nfs4_file_put_access at ffffffffa0562334 [nfsd] #10 [ffff88062e365cc8] nfs4_file_put_access at ffffffffa05623ab [nfsd] #11 [ffff88062e365ce8] free_generic_stateid at ffffffffa056634d [nfsd] #12 [ffff88062e365d18] release_open_stateid at ffffffffa0566e4b [nfsd] #13 [ffff88062e365d38] nfsd4_close at ffffffffa0567401 [nfsd] #14 [ffff88062e365d88] nfsd4_proc_compound at ffffffffa0557f28 [nfsd] #15 [ffff88062e365dd8] nfsd_dispatch at ffffffffa054543e [nfsd] #16 [ffff88062e365e18] svc_process_common at ffffffffa04ba5a4 [sunrpc] #17 [ffff88062e365e98] svc_process at ffffffffa04babe0 [sunrpc] #18 [ffff88062e365eb8] nfsd at ffffffffa0545b62 [nfsd] #19 [ffff88062e365ee8] kthread at ffffffff81090886 #20 [ffff88062e365f48] kernel_thread at ffffffff8100c14a ------------------------------------------------------------ Cc: stable@vger.kernel.org Signed-off-by: Harshula Jayasuriya <harshula@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>

The SDVO code tries to compare the encoder's and crtc's idea of the pixel_multiplier. Normally they have to match, but when transitioning to DPMS off, we turn off the pipe before reading out the pipe_config, so the pixel_multiplier in the pipe_config will be 0, whereas the encoder will still have its pixel_multiplier set to whatever value we were using when the display was active. This leads to a warning from intel_modeset_check_state(). WARNING: CPU: 1 PID: 2846 at drivers/gpu/drm/i915/intel_sdvo.c:1378 intel_sdvo_get_config+0x158/0x160() SDVO pixel multiplier mismatch, port: 0, encoder: 1 Modules linked in: snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep CPU: 1 PID: 2846 Comm: Xorg Not tainted 3.11.0-rc3-00208-gbe1e8d7-dirty #19 Hardware name: Apple Computer, Inc. Macmini1,1/Mac-F4208EC8, BIOS MM11.88Z.0055.B03.0604071521 04/07/06 00000000 00000000 ef0afa54 c1597bbb c1737ea4 ef0afa84 c10392ca c1737e6 ef0afab0 00000b1e c1737ea4 00000562 c12dfbe8 c12dfbe8 ef0afb14 00000000 f697ec00 ef0afa9c c103936e 00000009 ef0afa94 c1737e6 ef0afab0 ef0afadc Call Trace: [<c1597bbb>] dump_stack+0x41/0x56 [<c10392ca>] warn_slowpath_common+0x7a/0xa0 [<c103936e>] warn_slowpath_fmt+0x2e/0x30 [<c12dfbe8>] intel_sdvo_get_config+0x158/0x160 [<c12c3220>] check_crtc_state+0x1e0/0xb10 [<c12cdc7d>] intel_modeset_check_state+0x29d/0x7c0 [<c12dfe5c>] intel_sdvo_dpms+0x5c/0xa0 [<c12985de>] drm_mode_obj_set_property_ioctl+0x40e/0x420 [<c1298625>] drm_mode_connector_property_set_ioctl+0x35/0x40 [<c1289294>] drm_ioctl+0x3e4/0x540 [<c10fc1a2>] do_vfs_ioctl+0x72/0x570 [<c10fc72f>] SyS_ioctl+0x8f/0xa0 [<c159b7fa>] sysenter_do_call+0x12/0x22 ---[ end trace 7ce940aff1366d60 ]--- Fix the problem by skipping the encoder get_config() function for inactive encoders. Tested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

…s struct file commit e4daf1f upstream. The following call chain: ------------------------------------------------------------ nfs4_get_vfs_file - nfsd_open - dentry_open - do_dentry_open - __get_file_write_access - get_write_access - return atomic_inc_unless_negative(&inode->i_writecount) ? 0 : -ETXTBSY; ------------------------------------------------------------ can result in the following state: ------------------------------------------------------------ struct nfs4_file { ... fi_fds = {0xffff880c1fa65c80, 0xffffffffffffffe6, 0x0}, fi_access = {{ counter = 0x1 }, { counter = 0x0 }}, ... ------------------------------------------------------------ 1) First time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is NULL, hence nfsd_open() is called where we get status set to an error and fp->fi_fds[O_WRONLY] to -ETXTBSY. Thus we do not reach nfs4_file_get_access() and fi_access[O_WRONLY] is not incremented. 2) Second time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is NOT NULL (-ETXTBSY), so nfsd_open() is NOT called, but nfs4_file_get_access() IS called and fi_access[O_WRONLY] is incremented. Thus we leave a landmine in the form of the nfs4_file data structure in an incorrect state. 3) Eventually, when __nfs4_file_put_access() is called it finds fi_access[O_WRONLY] being non-zero, it decrements it and calls nfs4_file_put_fd() which tries to fput -ETXTBSY. ------------------------------------------------------------ ... [exception RIP: fput+0x9] RIP: ffffffff81177fa9 RSP: ffff88062e365c90 RFLAGS: 00010282 RAX: ffff880c2b3d99cc RBX: ffff880c2b3d9978 RCX: 0000000000000002 RDX: dead000000100101 RSI: 0000000000000001 RDI: ffffffffffffffe6 RBP: ffff88062e365c90 R8: ffff88041fe797d8 R9: ffff88062e365d58 R10: 0000000000000008 R11: 0000000000000000 R12: 0000000000000001 R13: 0000000000000007 R14: 0000000000000000 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #9 [ffff88062e365c98] __nfs4_file_put_access at ffffffffa0562334 [nfsd] #10 [ffff88062e365cc8] nfs4_file_put_access at ffffffffa05623ab [nfsd] #11 [ffff88062e365ce8] free_generic_stateid at ffffffffa056634d [nfsd] #12 [ffff88062e365d18] release_open_stateid at ffffffffa0566e4b [nfsd] #13 [ffff88062e365d38] nfsd4_close at ffffffffa0567401 [nfsd] #14 [ffff88062e365d88] nfsd4_proc_compound at ffffffffa0557f28 [nfsd] #15 [ffff88062e365dd8] nfsd_dispatch at ffffffffa054543e [nfsd] #16 [ffff88062e365e18] svc_process_common at ffffffffa04ba5a4 [sunrpc] #17 [ffff88062e365e98] svc_process at ffffffffa04babe0 [sunrpc] #18 [ffff88062e365eb8] nfsd at ffffffffa0545b62 [nfsd] #19 [ffff88062e365ee8] kthread at ffffffff81090886 #20 [ffff88062e365f48] kernel_thread at ffffffff8100c14a ------------------------------------------------------------ Signed-off-by: Harshula Jayasuriya <harshula@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>

…s struct file commit e4daf1f upstream. The following call chain: ------------------------------------------------------------ nfs4_get_vfs_file - nfsd_open - dentry_open - do_dentry_open - __get_file_write_access - get_write_access - return atomic_inc_unless_negative(&inode->i_writecount) ? 0 : -ETXTBSY; ------------------------------------------------------------ can result in the following state: ------------------------------------------------------------ struct nfs4_file { ... fi_fds = {0xffff880c1fa65c80, 0xffffffffffffffe6, 0x0}, fi_access = {{ counter = 0x1 }, { counter = 0x0 }}, ... ------------------------------------------------------------ 1) First time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is NULL, hence nfsd_open() is called where we get status set to an error and fp->fi_fds[O_WRONLY] to -ETXTBSY. Thus we do not reach nfs4_file_get_access() and fi_access[O_WRONLY] is not incremented. 2) Second time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is NOT NULL (-ETXTBSY), so nfsd_open() is NOT called, but nfs4_file_get_access() IS called and fi_access[O_WRONLY] is incremented. Thus we leave a landmine in the form of the nfs4_file data structure in an incorrect state. 3) Eventually, when __nfs4_file_put_access() is called it finds fi_access[O_WRONLY] being non-zero, it decrements it and calls nfs4_file_put_fd() which tries to fput -ETXTBSY. ------------------------------------------------------------ ... [exception RIP: fput+0x9] RIP: ffffffff81177fa9 RSP: ffff88062e365c90 RFLAGS: 00010282 RAX: ffff880c2b3d99cc RBX: ffff880c2b3d9978 RCX: 0000000000000002 RDX: dead000000100101 RSI: 0000000000000001 RDI: ffffffffffffffe6 RBP: ffff88062e365c90 R8: ffff88041fe797d8 R9: ffff88062e365d58 R10: 0000000000000008 R11: 0000000000000000 R12: 0000000000000001 R13: 0000000000000007 R14: 0000000000000000 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 hardkernel#9 [ffff88062e365c98] __nfs4_file_put_access at ffffffffa0562334 [nfsd] hardkernel#10 [ffff88062e365cc8] nfs4_file_put_access at ffffffffa05623ab [nfsd] hardkernel#11 [ffff88062e365ce8] free_generic_stateid at ffffffffa056634d [nfsd] hardkernel#12 [ffff88062e365d18] release_open_stateid at ffffffffa0566e4b [nfsd] hardkernel#13 [ffff88062e365d38] nfsd4_close at ffffffffa0567401 [nfsd] hardkernel#14 [ffff88062e365d88] nfsd4_proc_compound at ffffffffa0557f28 [nfsd] hardkernel#15 [ffff88062e365dd8] nfsd_dispatch at ffffffffa054543e [nfsd] hardkernel#16 [ffff88062e365e18] svc_process_common at ffffffffa04ba5a4 [sunrpc] hardkernel#17 [ffff88062e365e98] svc_process at ffffffffa04babe0 [sunrpc] hardkernel#18 [ffff88062e365eb8] nfsd at ffffffffa0545b62 [nfsd] hardkernel#19 [ffff88062e365ee8] kthread at ffffffff81090886 hardkernel#20 [ffff88062e365f48] kernel_thread at ffffffff8100c14a ------------------------------------------------------------ Signed-off-by: Harshula Jayasuriya <harshula@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When a CPU is hot removed we'll cancel all the delayed work items via gov_cancel_work(). Normally this will just cancels a delayed timer on each CPU that the policy is managing and the work won't run, but if the work is already running the workqueue code will wait for the work to finish before continuing to prevent the work items from re-queuing themselves like they normally do. This scheme will work most of the time, except for the case where the work function determines that it should adjust the delay for all other CPUs that the policy is managing. If this scenario occurs, the canceling CPU will cancel its own work but queue up the other CPUs works to run. For example: CPU0 CPU1 ---- ---- cpu_down() ... __cpufreq_remove_dev() cpufreq_governor_dbs() case CPUFREQ_GOV_STOP: gov_cancel_work(dbs_data, policy); cpu0 work is canceled timer is canceled cpu1 work is canceled <work runs> <waits for cpu1> od_dbs_timer() gov_queue_work(*, *, true); cpu0 work queued cpu1 work queued cpu2 work queued ... cpu1 work is canceled cpu2 work is canceled ... At the end of the GOV_STOP case cpu0 still has a work queued to run although the code is expecting all of the works to be canceled. __cpufreq_remove_dev() will then proceed to re-initialize all the other CPUs works except for the CPU that is going down. The CPUFREQ_GOV_START case in cpufreq_governor_dbs() will trample over the queued work and debugobjects will spit out a warning: WARNING: at lib/debugobjects.c:260 debug_print_object+0x94/0xbc() ODEBUG: init active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x10 Modules linked in: CPU: 0 PID: 1491 Comm: sh Tainted: G W 3.10.0 #19 [<c010c178>] (unwind_backtrace+0x0/0x11c) from [<c0109dec>] (show_stack+0x10/0x14) [<c0109dec>] (show_stack+0x10/0x14) from [<c01904cc>] (warn_slowpath_common+0x4c/0x6c) [<c01904cc>] (warn_slowpath_common+0x4c/0x6c) from [<c019056c>] (warn_slowpath_fmt+0x2c/0x3c) [<c019056c>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0388a7c>] (debug_print_object+0x94/0xbc) [<c0388a7c>] (debug_print_object+0x94/0xbc) from [<c0388e34>] (__debug_object_init+0x2d0/0x340) [<c0388e34>] (__debug_object_init+0x2d0/0x340) from [<c019e3b0>] (init_timer_key+0x14/0xb0) [<c019e3b0>] (init_timer_key+0x14/0xb0) from [<c0635f78>] (cpufreq_governor_dbs+0x3e8/0x5f8) [<c0635f78>] (cpufreq_governor_dbs+0x3e8/0x5f8) from [<c06325a0>] (__cpufreq_governor+0xdc/0x1a4) [<c06325a0>] (__cpufreq_governor+0xdc/0x1a4) from [<c0633704>] (__cpufreq_remove_dev.isra.10+0x3b4/0x434) [<c0633704>] (__cpufreq_remove_dev.isra.10+0x3b4/0x434) from [<c08989f4>] (cpufreq_cpu_callback+0x60/0x80) [<c08989f4>] (cpufreq_cpu_callback+0x60/0x80) from [<c08a43c0>] (notifier_call_chain+0x38/0x68) [<c08a43c0>] (notifier_call_chain+0x38/0x68) from [<c01938e0>] (__cpu_notify+0x28/0x40) [<c01938e0>] (__cpu_notify+0x28/0x40) from [<c0892ad4>] (_cpu_down+0x7c/0x2c0) [<c0892ad4>] (_cpu_down+0x7c/0x2c0) from [<c0892d3c>] (cpu_down+0x24/0x40) [<c0892d3c>] (cpu_down+0x24/0x40) from [<c0893ea8>] (store_online+0x2c/0x74) [<c0893ea8>] (store_online+0x2c/0x74) from [<c04519d8>] (dev_attr_store+0x18/0x24) [<c04519d8>] (dev_attr_store+0x18/0x24) from [<c02a69d4>] (sysfs_write_file+0x100/0x148) [<c02a69d4>] (sysfs_write_file+0x100/0x148) from [<c0255c18>] (vfs_write+0xcc/0x174) [<c0255c18>] (vfs_write+0xcc/0x174) from [<c0255f70>] (SyS_write+0x38/0x64) [<c0255f70>] (SyS_write+0x38/0x64) from [<c0106120>] (ret_fast_syscall+0x0/0x30) Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

When booting secondary CPUs, announce_cpu() is called to show which cpu has been brought up. For example: [ 0.402751] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 OK [ 0.525667] smpboot: Booting Node 1, Processors #6 #7 #8 #9 #10 #11 OK [ 0.755592] smpboot: Booting Node 0, Processors #12 #13 #14 #15 #16 #17 OK [ 0.890495] smpboot: Booting Node 1, Processors #18 #19 #20 #21 #22 #23 But the last "OK" is lost, because 'nr_cpu_ids-1' represents the maximum possible cpu id. It should use the maximum present cpu id in case not all CPUs booted up. Signed-off-by: Libin <huawei.libin@huawei.com> Cc: <guohanjun@huawei.com> Cc: <wangyijing@huawei.com> Cc: <fenghua.yu@intel.com> Cc: <paul.gortmaker@windriver.com> Link: http://lkml.kernel.org/r/1378378676-18276-1-git-send-email-huawei.libin@huawei.com [ tweaked the changelog, removed unnecessary line break, tweaked the format to align the fields vertically. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>

Hello, Jens. The original thread can be read from http://thread.gmane.org/gmane.linux.kernel.cgroups/8937 While it leads to oops, given that it only triggers under specific configurations which aren't common. I don't think it's necessary to backport it through -stable and merging it during the coming merge window should be enough. Thanks! ----- 8< ----- Currently, q->root_blkg and q->root_rl.blkg are set from blkcg_activate_policy() and cleared from blkg_destroy_all(). This doesn't necessarily coincide with the lifetime of the root blkcg_gq leading to the following oops when blkcg is enabled but no policy is activated because __blk_queue_next_rl() malfunctions expecting the root_blkg pointers to be set. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff810c58cb>] __wake_up_common+0x2b/0x90 PGD 60f7a9067 PUD 60f4c9067 PMD 0 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC gsmi: Log Shutdown Reason 0x03 Modules linked in: act_mirred cls_tcindex cls_prioshift sch_dsmark xt_multiport iptable_mangle sata_mv elephant elephant_dev_num cdc_acm uhci_hcd ehci_hcd i2c_d CPU: 9 PID: 41382 Comm: iSCSI-write- Not tainted 3.11.0-dbg-DEV #19 Hardware name: Intel XXX task: ffff88060d16eec0 ti: ffff88060d170000 task.ti: ffff88060d170000 RIP: 0010:[<ffffffff810c58cb>] [<ffffffff810c58cb>] __wake_up_common+0x2b/0x90 RSP: 0000:ffff88060d171818 EFLAGS: 00010096 RAX: 0000000000000082 RBX: ffff880baa3dee60 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffff880baa3dee60 RBP: ffff88060d171858 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000002 R12: ffff880baa3dee98 R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000003 FS: 00007f977cba6700(0000) GS:ffff880c79c60000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 000000060f7a5000 CR4: 00000000000007e0 Stack: 0000000000000082 0000000000000000 ffff88060d171858 ffff880baa3dee60 0000000000000082 0000000000000003 0000000000000000 0000000000000000 ffff88060d171898 ffffffff810c7848 ffff88060d171888 ffff880bde4bc4b8 Call Trace: [<ffffffff810c7848>] __wake_up+0x48/0x70 [<ffffffff8131da53>] __blk_drain_queue+0x123/0x190 [<ffffffff8131dbb5>] blk_cleanup_queue+0xf5/0x210 [<ffffffff8141877a>] __scsi_remove_device+0x5a/0xd0 [<ffffffff81418824>] scsi_remove_device+0x34/0x50 [<ffffffff814189cb>] scsi_remove_target+0x16b/0x220 [<ffffffff814210f1>] __iscsi_unbind_session+0xd1/0x1b0 [<ffffffff814212b2>] iscsi_remove_session+0xe2/0x1c0 [<ffffffff814213a6>] iscsi_destroy_session+0x16/0x60 [<ffffffff81423a59>] iscsi_session_teardown+0xd9/0x100 [<ffffffff8142b75a>] iscsi_sw_tcp_session_destroy+0x5a/0xb0 [<ffffffff81420948>] iscsi_if_rx+0x10e8/0x1560 [<ffffffff81573335>] netlink_unicast+0x145/0x200 [<ffffffff815736f3>] netlink_sendmsg+0x303/0x410 [<ffffffff81528196>] sock_sendmsg+0xa6/0xd0 [<ffffffff815294bc>] ___sys_sendmsg+0x38c/0x3a0 [<ffffffff811ea840>] ? fget_light+0x40/0x160 [<ffffffff811ea899>] ? fget_light+0x99/0x160 [<ffffffff811ea840>] ? fget_light+0x40/0x160 [<ffffffff8152bc79>] __sys_sendmsg+0x49/0x90 [<ffffffff8152bcd2>] SyS_sendmsg+0x12/0x20 [<ffffffff815fb642>] system_call_fastpath+0x16/0x1b Code: 66 66 66 66 90 55 48 89 e5 41 57 41 89 f7 41 56 41 89 ce 41 55 41 54 4c 8d 67 38 53 48 83 ec 18 89 55 c4 48 8b 57 38 4c 89 45 c8 <4c> 8b 2a 48 8d 42 e8 49 Fix it by moving r->root_blkg and q->root_rl.blkg setting to blkg_create() and clearing to blkg_destroy() so that they area initialized when a root blkg is created and cleared when destroyed. Reported-and-tested-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>

The clk_init_data.flags of clk-fixup-mux is left there without initialization. It may hold some random data and cause clock framework interpret the clock in an unexpected way. At least on imx6sl, the following division by zero error with sched_clock is seen because of it. Division by zero in kernel. CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.11.0-rc3+ #19 Backtrace: [<80011af0>] (dump_backtrace+0x0/0x10c) from [<80011c90>] (show_stack+0x18/0x1c) r6:3b9aca00 r5:00000020 r4:00000000 r3:00000000 [<80011c78>] (show_stack+0x0/0x1c) from [<8055e02c>] (dump_stack+0x78/0x94) [<8055dfb4>] (dump_stack+0x0/0x94) from [<80011924>] (__div0+0x18/0x20) r4:00000000 r3:00000000 [<8001190c>] (__div0+0x0/0x20) from [<8026c408>] (Ldiv0_64+0x8/0x18) [<8006330c>] (clocks_calc_mult_shift+0x0/0xf8) from [<8072f604>] (setup_sched_clock+0x88/0x1f0) [<8072f57c>] (setup_sched_clock+0x0/0x1f0) from [<8071ad48>] (mxc_timer_init+0xe8/0x17c) [<8071ac60>] (mxc_timer_init+0x0/0x17c) from [<807290b0>] (imx6sl_clocks_init+0x1db8/0x1dc0) r8:807a9ca4 r7:00000000 r6:80777564 r5:8100c1f4 r4:c0820000 [<807272f8>] (imx6sl_clocks_init+0x0/0x1dc0) from [<807420ac>] (of_clk_init+0x40/0x6c) [<8074206c>] (of_clk_init+0x0/0x6c) from [<807290cc>] (imx6sl_timer_init+0x14/0x18) r5:807a8e80 r4:ffffffff [<807290b8>] (imx6sl_timer_init+0x0/0x18) from [<80716e1c>] (time_init+0x24/0x34) [<80716df8>] (time_init+0x0/0x34) from [<80713738>] (start_kernel+0x1b0/0x310) [<80713588>] (start_kernel+0x0/0x310) from [<80008074>] (0x80008074) r7:80770b08 r6:80754cd4 r5:8076c8c4 r4:10c53c7d sched_clock: 32 bits at 0 Hz, resolution 0ns, wraps every 0ms Fix the bug by initializing init.flags as zero. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

As the new x86 CPU bootup printout format code maintainer, I am taking immediate action to improve and clean (and thus indulge my OCD) the reporting of the cores when coming up online. Fix padding to a right-hand alignment, cleanup code and bind reporting width to the max number of supported CPUs on the system, like this: [ 0.074509] smpboot: Booting Node 0, Processors: #1 #2 #3 #4 #5 #6 #7 OK [ 0.644008] smpboot: Booting Node 1, Processors: #8 #9 #10 #11 #12 #13 #14 #15 OK [ 1.245006] smpboot: Booting Node 2, Processors: #16 #17 #18 #19 #20 #21 #22 #23 OK [ 1.864005] smpboot: Booting Node 3, Processors: #24 #25 #26 #27 #28 #29 #30 #31 OK [ 2.489005] smpboot: Booting Node 4, Processors: #32 #33 #34 #35 #36 #37 #38 #39 OK [ 3.093005] smpboot: Booting Node 5, Processors: #40 #41 #42 #43 #44 #45 #46 #47 OK [ 3.698005] smpboot: Booting Node 6, Processors: #48 #49 #50 #51 #52 #53 #54 #55 OK [ 4.304005] smpboot: Booting Node 7, Processors: #56 #57 #58 #59 #60 #61 #62 #63 OK [ 4.961413] Brought up 64 CPUs and this: [ 0.072367] smpboot: Booting Node 0, Processors: #1 #2 #3 #4 #5 #6 #7 OK [ 0.686329] Brought up 8 CPUs Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Libin <huawei.libin@huawei.com> Cc: wangyijing@huawei.com Cc: fenghua.yu@intel.com Cc: guohanjun@huawei.com Cc: paul.gortmaker@windriver.com Link: http://lkml.kernel.org/r/20130927143554.GF4422@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>

Turn it into (for example): [ 0.073380] x86: Booting SMP configuration: [ 0.074005] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.603005] .... node #1, CPUs: #8 #9 #10 #11 #12 #13 #14 #15 [ 1.200005] .... node #2, CPUs: #16 #17 #18 #19 #20 #21 #22 #23 [ 1.796005] .... node #3, CPUs: #24 #25 #26 #27 #28 #29 #30 #31 [ 2.393005] .... node #4, CPUs: #32 #33 #34 #35 #36 #37 #38 #39 [ 2.996005] .... node #5, CPUs: #40 #41 #42 #43 #44 #45 #46 #47 [ 3.600005] .... node #6, CPUs: #48 #49 #50 #51 #52 #53 #54 #55 [ 4.202005] .... node #7, CPUs: #56 #57 #58 #59 #60 #61 #62 #63 [ 4.811005] .... node #8, CPUs: #64 #65 #66 #67 #68 #69 #70 #71 [ 5.421006] .... node #9, CPUs: #72 #73 #74 #75 #76 #77 #78 #79 [ 6.032005] .... node #10, CPUs: #80 #81 #82 #83 #84 #85 #86 #87 [ 6.648006] .... node #11, CPUs: #88 #89 #90 #91 #92 #93 #94 #95 [ 7.262005] .... node #12, CPUs: #96 #97 #98 #99 #100 #101 #102 #103 [ 7.865005] .... node #13, CPUs: #104 #105 #106 #107 #108 #109 #110 #111 [ 8.466005] .... node #14, CPUs: #112 #113 #114 #115 #116 #117 #118 #119 [ 9.073006] .... node #15, CPUs: #120 #121 #122 #123 #124 #125 #126 #127 [ 9.679901] x86: Booted up 16 nodes, 128 CPUs and drop useless elements. Change num_digits() to hpa's division-avoiding, cell-phone-typed version which he went at great lengths and pains to submit on a Saturday evening. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: huawei.libin@huawei.com Cc: wangyijing@huawei.com Cc: fenghua.yu@intel.com Cc: guohanjun@huawei.com Cc: paul.gortmaker@windriver.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20130930095624.GB16383@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>

The SELinux/NetLabel glue code has a locking bug that affects systems with NetLabel enabled, see the kernel error message below. This patch corrects this problem by converting the bottom half socket lock to a more conventional, and correct for this call-path, lock_sock() call. =============================== [ INFO: suspicious RCU usage. ] 3.11.0-rc3+ #19 Not tainted ------------------------------- net/ipv4/cipso_ipv4.c:1928 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 2 locks held by ping/731: #0: (slock-AF_INET/1){+.-...}, at: [...] selinux_netlbl_socket_connect #1: (rcu_read_lock){.+.+..}, at: [<...>] netlbl_conn_setattr stack backtrace: CPU: 1 PID: 731 Comm: ping Not tainted 3.11.0-rc3+ #19 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 0000000000000001 ffff88006f659d28 ffffffff81726b6a ffff88003732c500 ffff88006f659d58 ffffffff810e4457 ffff88006b845a00 0000000000000000 000000000000000c ffff880075aa2f50 ffff88006f659d90 ffffffff8169bec7 Call Trace: [<ffffffff81726b6a>] dump_stack+0x54/0x74 [<ffffffff810e4457>] lockdep_rcu_suspicious+0xe7/0x120 [<ffffffff8169bec7>] cipso_v4_sock_setattr+0x187/0x1a0 [<ffffffff8170f317>] netlbl_conn_setattr+0x187/0x190 [<ffffffff8170f195>] ? netlbl_conn_setattr+0x5/0x190 [<ffffffff8131ac9e>] selinux_netlbl_socket_connect+0xae/0xc0 [<ffffffff81303025>] selinux_socket_connect+0x135/0x170 [<ffffffff8119d127>] ? might_fault+0x57/0xb0 [<ffffffff812fb146>] security_socket_connect+0x16/0x20 [<ffffffff815d3ad3>] SYSC_connect+0x73/0x130 [<ffffffff81739a85>] ? sysret_check+0x22/0x5d [<ffffffff810e5e2d>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [<ffffffff81373d4e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff815d52be>] SyS_connect+0xe/0x10 [<ffffffff81739a59>] system_call_fastpath+0x16/0x1b Cc: stable@vger.kernel.org Signed-off-by: Paul Moore <pmoore@redhat.com>

commit 42d64e1 upstream. The SELinux/NetLabel glue code has a locking bug that affects systems with NetLabel enabled, see the kernel error message below. This patch corrects this problem by converting the bottom half socket lock to a more conventional, and correct for this call-path, lock_sock() call. =============================== [ INFO: suspicious RCU usage. ] 3.11.0-rc3+ #19 Not tainted ------------------------------- net/ipv4/cipso_ipv4.c:1928 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 2 locks held by ping/731: #0: (slock-AF_INET/1){+.-...}, at: [...] selinux_netlbl_socket_connect #1: (rcu_read_lock){.+.+..}, at: [<...>] netlbl_conn_setattr stack backtrace: CPU: 1 PID: 731 Comm: ping Not tainted 3.11.0-rc3+ #19 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 0000000000000001 ffff88006f659d28 ffffffff81726b6a ffff88003732c500 ffff88006f659d58 ffffffff810e4457 ffff88006b845a00 0000000000000000 000000000000000c ffff880075aa2f50 ffff88006f659d90 ffffffff8169bec7 Call Trace: [<ffffffff81726b6a>] dump_stack+0x54/0x74 [<ffffffff810e4457>] lockdep_rcu_suspicious+0xe7/0x120 [<ffffffff8169bec7>] cipso_v4_sock_setattr+0x187/0x1a0 [<ffffffff8170f317>] netlbl_conn_setattr+0x187/0x190 [<ffffffff8170f195>] ? netlbl_conn_setattr+0x5/0x190 [<ffffffff8131ac9e>] selinux_netlbl_socket_connect+0xae/0xc0 [<ffffffff81303025>] selinux_socket_connect+0x135/0x170 [<ffffffff8119d127>] ? might_fault+0x57/0xb0 [<ffffffff812fb146>] security_socket_connect+0x16/0x20 [<ffffffff815d3ad3>] SYSC_connect+0x73/0x130 [<ffffffff81739a85>] ? sysret_check+0x22/0x5d [<ffffffff810e5e2d>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [<ffffffff81373d4e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff815d52be>] SyS_connect+0xe/0x10 [<ffffffff81739a59>] system_call_fastpath+0x16/0x1b Signed-off-by: Paul Moore <pmoore@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…is not present commit dc75925(OMAP: hwmod: Fix the missing braces) introduced missing braces, however, we just set return result if clk_get fail and we populate the error pointer in clk pointer and pass it along to clk_prepare. This is wrong. The intent seems to be retry remaining clocks if they are available and warn the ones we cant find clks for. With the current logic, we see the following crash: omap_hwmod: l3_main: cannot clk_get interface_clk emac_ick Unable to handle kernel NULL pointer dereference at virtual address 00000032 pgd = c0004000 [00000032] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc1-00044-gcc9fd5a-dirty #19 task: ce0c3440 ti: ce0c4000 task.ti: ce0c4000 PC is at __clk_prepare+0x10/0x74 LR is at clk_prepare+0x14/0x24 <snip> [<c044d59c>] (__clk_prepare+0x10/0x74) from [<c044d9b0>] (clk_prepare+0x14/0x24) [<c044d9b0>] (clk_prepare+0x14/0x24) from [<c077d8c4>] (_init+0x24c/0x3bc) [<c077d8c4>] (_init+0x24c/0x3bc) from [<c0027328>] (omap_hwmod_for_each+0x34/0x5c) [<c0027328>] (omap_hwmod_for_each+0x34/0x5c) from [<c077dfa0>] (__omap_hwmod_setup_all+0x24/0x40) [<c077dfa0>] (__omap_hwmod_setup_all+0x24/0x40) from [<c0008928>] (do_one_initcall+0x38/0x168) [<c0008928>] (do_one_initcall+0x38/0x168) from [<c0771be8>] (kernel_init_freeable+0xfc/0x1cc) [<c0771be8>] (kernel_init_freeable+0xfc/0x1cc) from [<c0521064>] (kernel_init+0x8/0x110) [<c0521064>] (kernel_init+0x8/0x110) from [<c000e568>] (ret_from_fork+0x14/0x2c) Code: e92d4038 e2504000 01a05004 0a000005 (e5943034) So, just warn and continue instead of proceeding and crashing, with missing clock nodes/bad data, we will eventually fail, however we should now have enough information to identify the culprit. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>

commit 42d64e1 upstream. The SELinux/NetLabel glue code has a locking bug that affects systems with NetLabel enabled, see the kernel error message below. This patch corrects this problem by converting the bottom half socket lock to a more conventional, and correct for this call-path, lock_sock() call. =============================== [ INFO: suspicious RCU usage. ] 3.11.0-rc3+ #19 Not tainted ------------------------------- net/ipv4/cipso_ipv4.c:1928 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 2 locks held by ping/731: #0: (slock-AF_INET/1){+.-...}, at: [...] selinux_netlbl_socket_connect #1: (rcu_read_lock){.+.+..}, at: [<...>] netlbl_conn_setattr stack backtrace: CPU: 1 PID: 731 Comm: ping Not tainted 3.11.0-rc3+ #19 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 0000000000000001 ffff88006f659d28 ffffffff81726b6a ffff88003732c500 ffff88006f659d58 ffffffff810e4457 ffff88006b845a00 0000000000000000 000000000000000c ffff880075aa2f50 ffff88006f659d90 ffffffff8169bec7 Call Trace: [<ffffffff81726b6a>] dump_stack+0x54/0x74 [<ffffffff810e4457>] lockdep_rcu_suspicious+0xe7/0x120 [<ffffffff8169bec7>] cipso_v4_sock_setattr+0x187/0x1a0 [<ffffffff8170f317>] netlbl_conn_setattr+0x187/0x190 [<ffffffff8170f195>] ? netlbl_conn_setattr+0x5/0x190 [<ffffffff8131ac9e>] selinux_netlbl_socket_connect+0xae/0xc0 [<ffffffff81303025>] selinux_socket_connect+0x135/0x170 [<ffffffff8119d127>] ? might_fault+0x57/0xb0 [<ffffffff812fb146>] security_socket_connect+0x16/0x20 [<ffffffff815d3ad3>] SYSC_connect+0x73/0x130 [<ffffffff81739a85>] ? sysret_check+0x22/0x5d [<ffffffff810e5e2d>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [<ffffffff81373d4e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff815d52be>] SyS_connect+0xe/0x10 [<ffffffff81739a59>] system_call_fastpath+0x16/0x1b Signed-off-by: Paul Moore <pmoore@redhat.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 42d64e1 upstream. The SELinux/NetLabel glue code has a locking bug that affects systems with NetLabel enabled, see the kernel error message below. This patch corrects this problem by converting the bottom half socket lock to a more conventional, and correct for this call-path, lock_sock() call. =============================== [ INFO: suspicious RCU usage. ] 3.11.0-rc3+ hardkernel#19 Not tainted ------------------------------- net/ipv4/cipso_ipv4.c:1928 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 2 locks held by ping/731: #0: (slock-AF_INET/1){+.-...}, at: [...] selinux_netlbl_socket_connect hardkernel#1: (rcu_read_lock){.+.+..}, at: [<...>] netlbl_conn_setattr stack backtrace: CPU: 1 PID: 731 Comm: ping Not tainted 3.11.0-rc3+ hardkernel#19 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 0000000000000001 ffff88006f659d28 ffffffff81726b6a ffff88003732c500 ffff88006f659d58 ffffffff810e4457 ffff88006b845a00 0000000000000000 000000000000000c ffff880075aa2f50 ffff88006f659d90 ffffffff8169bec7 Call Trace: [<ffffffff81726b6a>] dump_stack+0x54/0x74 [<ffffffff810e4457>] lockdep_rcu_suspicious+0xe7/0x120 [<ffffffff8169bec7>] cipso_v4_sock_setattr+0x187/0x1a0 [<ffffffff8170f317>] netlbl_conn_setattr+0x187/0x190 [<ffffffff8170f195>] ? netlbl_conn_setattr+0x5/0x190 [<ffffffff8131ac9e>] selinux_netlbl_socket_connect+0xae/0xc0 [<ffffffff81303025>] selinux_socket_connect+0x135/0x170 [<ffffffff8119d127>] ? might_fault+0x57/0xb0 [<ffffffff812fb146>] security_socket_connect+0x16/0x20 [<ffffffff815d3ad3>] SYSC_connect+0x73/0x130 [<ffffffff81739a85>] ? sysret_check+0x22/0x5d [<ffffffff810e5e2d>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [<ffffffff81373d4e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff815d52be>] SyS_connect+0xe/0x10 [<ffffffff81739a59>] system_call_fastpath+0x16/0x1b Signed-off-by: Paul Moore <pmoore@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3617f2c upstream. When a CPU is hot removed we'll cancel all the delayed work items via gov_cancel_work(). Normally this will just cancels a delayed timer on each CPU that the policy is managing and the work won't run, but if the work is already running the workqueue code will wait for the work to finish before continuing to prevent the work items from re-queuing themselves like they normally do. This scheme will work most of the time, except for the case where the work function determines that it should adjust the delay for all other CPUs that the policy is managing. If this scenario occurs, the canceling CPU will cancel its own work but queue up the other CPUs works to run. For example: CPU0 CPU1 ---- ---- cpu_down() ... __cpufreq_remove_dev() cpufreq_governor_dbs() case CPUFREQ_GOV_STOP: gov_cancel_work(dbs_data, policy); cpu0 work is canceled timer is canceled cpu1 work is canceled <work runs> <waits for cpu1> od_dbs_timer() gov_queue_work(*, *, true); cpu0 work queued cpu1 work queued cpu2 work queued ... cpu1 work is canceled cpu2 work is canceled ... At the end of the GOV_STOP case cpu0 still has a work queued to run although the code is expecting all of the works to be canceled. __cpufreq_remove_dev() will then proceed to re-initialize all the other CPUs works except for the CPU that is going down. The CPUFREQ_GOV_START case in cpufreq_governor_dbs() will trample over the queued work and debugobjects will spit out a warning: WARNING: at lib/debugobjects.c:260 debug_print_object+0x94/0xbc() ODEBUG: init active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x10 Modules linked in: CPU: 0 PID: 1491 Comm: sh Tainted: G W 3.10.0 hardkernel#19 [<c010c178>] (unwind_backtrace+0x0/0x11c) from [<c0109dec>] (show_stack+0x10/0x14) [<c0109dec>] (show_stack+0x10/0x14) from [<c01904cc>] (warn_slowpath_common+0x4c/0x6c) [<c01904cc>] (warn_slowpath_common+0x4c/0x6c) from [<c019056c>] (warn_slowpath_fmt+0x2c/0x3c) [<c019056c>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0388a7c>] (debug_print_object+0x94/0xbc) [<c0388a7c>] (debug_print_object+0x94/0xbc) from [<c0388e34>] (__debug_object_init+0x2d0/0x340) [<c0388e34>] (__debug_object_init+0x2d0/0x340) from [<c019e3b0>] (init_timer_key+0x14/0xb0) [<c019e3b0>] (init_timer_key+0x14/0xb0) from [<c0635f78>] (cpufreq_governor_dbs+0x3e8/0x5f8) [<c0635f78>] (cpufreq_governor_dbs+0x3e8/0x5f8) from [<c06325a0>] (__cpufreq_governor+0xdc/0x1a4) [<c06325a0>] (__cpufreq_governor+0xdc/0x1a4) from [<c0633704>] (__cpufreq_remove_dev.isra.10+0x3b4/0x434) [<c0633704>] (__cpufreq_remove_dev.isra.10+0x3b4/0x434) from [<c08989f4>] (cpufreq_cpu_callback+0x60/0x80) [<c08989f4>] (cpufreq_cpu_callback+0x60/0x80) from [<c08a43c0>] (notifier_call_chain+0x38/0x68) [<c08a43c0>] (notifier_call_chain+0x38/0x68) from [<c01938e0>] (__cpu_notify+0x28/0x40) [<c01938e0>] (__cpu_notify+0x28/0x40) from [<c0892ad4>] (_cpu_down+0x7c/0x2c0) [<c0892ad4>] (_cpu_down+0x7c/0x2c0) from [<c0892d3c>] (cpu_down+0x24/0x40) [<c0892d3c>] (cpu_down+0x24/0x40) from [<c0893ea8>] (store_online+0x2c/0x74) [<c0893ea8>] (store_online+0x2c/0x74) from [<c04519d8>] (dev_attr_store+0x18/0x24) [<c04519d8>] (dev_attr_store+0x18/0x24) from [<c02a69d4>] (sysfs_write_file+0x100/0x148) [<c02a69d4>] (sysfs_write_file+0x100/0x148) from [<c0255c18>] (vfs_write+0xcc/0x174) [<c0255c18>] (vfs_write+0xcc/0x174) from [<c0255f70>] (SyS_write+0x38/0x64) [<c0255f70>] (SyS_write+0x38/0x64) from [<c0106120>] (ret_fast_syscall+0x0/0x30) Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Oleg reports a division by zero error on zero-length write() to the percpu_pagelist_fraction sysctl: divide error: 0000 [#1] SMP DEBUG_PAGEALLOC CPU: 1 PID: 9142 Comm: badarea_io Not tainted 3.15.0-rc2-vm-nfs+ hardkernel#19 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8800d5aeb6e0 ti: ffff8800d87a2000 task.ti: ffff8800d87a2000 RIP: 0010: percpu_pagelist_fraction_sysctl_handler+0x84/0x120 RSP: 0018:ffff8800d87a3e78 EFLAGS: 00010246 RAX: 0000000000000f89 RBX: ffff88011f7fd000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000010 RBP: ffff8800d87a3e98 R08: ffffffff81d002c8 R09: ffff8800d87a3f50 R10: 000000000000000b R11: 0000000000000246 R12: 0000000000000060 R13: ffffffff81c3c3e0 R14: ffffffff81cfddf8 R15: ffff8801193b0800 FS: 00007f614f1e9740(0000) GS:ffff88011f440000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f614f1fa000 CR3: 00000000d9291000 CR4: 00000000000006e0 Call Trace: proc_sys_call_handler+0xb3/0xc0 proc_sys_write+0x14/0x20 vfs_write+0xba/0x1e0 SyS_write+0x46/0xb0 tracesys+0xe1/0xe6 However, if the percpu_pagelist_fraction sysctl is set by the user, it is also impossible to restore it to the kernel default since the user cannot write 0 to the sysctl. This patch allows the user to write 0 to restore the default behavior. It still requires a fraction equal to or larger than 8, however, as stated by the documentation for sanity. If a value in the range [1, 7] is written, the sysctl will return EINVAL. This successfully solves the divide by zero issue at the same time. Signed-off-by: David Rientjes <rientjes@google.com> Reported-by: Oleg Drokin <green@linuxhacker.ru> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch tries to fix this crash: hardkernel#5 [ffff88003c1cd690] do_invalid_op at ffffffff810166d5 hardkernel#6 [ffff88003c1cd730] invalid_op at ffffffff8159b2de [exception RIP: ocfs2_direct_IO_get_blocks+359] RIP: ffffffffa05dfa27 RSP: ffff88003c1cd7e8 RFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff88003c1cdaa8 RCX: 0000000000000000 RDX: 000000000000000c RSI: ffff880027a95000 RDI: ffff88003c79b540 RBP: ffff88003c1cd858 R8: 0000000000000000 R9: ffffffff815f6ba0 R10: 00000000000001c9 R11: 00000000000001c9 R12: ffff88002d271500 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000001000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 hardkernel#7 [ffff88003c1cd860] do_direct_IO at ffffffff811cd31b hardkernel#8 [ffff88003c1cd950] direct_IO_iovec at ffffffff811cde9c hardkernel#9 [ffff88003c1cd9b0] do_blockdev_direct_IO at ffffffff811ce764 hardkernel#10 [ffff88003c1cdb80] __blockdev_direct_IO at ffffffff811ce7cc hardkernel#11 [ffff88003c1cdbb0] ocfs2_direct_IO at ffffffffa05df756 [ocfs2] hardkernel#12 [ffff88003c1cdbe0] generic_file_direct_write_iter at ffffffff8112f935 hardkernel#13 [ffff88003c1cdc40] ocfs2_file_write_iter at ffffffffa0600ccc [ocfs2] hardkernel#14 [ffff88003c1cdd50] do_aio_write at ffffffff8119126c hardkernel#15 [ffff88003c1cddc0] aio_rw_vect_retry at ffffffff811d9bb4 hardkernel#16 [ffff88003c1cddf0] aio_run_iocb at ffffffff811db880 hardkernel#17 [ffff88003c1cde30] io_submit_one at ffffffff811dc238 hardkernel#18 [ffff88003c1cde80] do_io_submit at ffffffff811dc437 hardkernel#19 [ffff88003c1cdf70] sys_io_submit at ffffffff811dc530 hardkernel#20 [ffff88003c1cdf80] system_call_fastpath at ffffffff8159a159 It crashes at BUG_ON(create && (ext_flags & OCFS2_EXT_REFCOUNTED)); in ocfs2_direct_IO_get_blocks. ocfs2_direct_IO_get_blocks is expecting the OCFS2_EXT_REFCOUNTED be removed in ocfs2_prepare_inode_for_write() if it was there. But no cluster lock is taken during the time before (or inside) ocfs2_prepare_inode_for_write() and after ocfs2_direct_IO_get_blocks(). It can happen in this case: Node A(which crashes) Node B ------------------------ --------------------------- ocfs2_file_aio_write ocfs2_prepare_inode_for_write ocfs2_inode_lock ... ocfs2_inode_unlock #no refcount found .... ocfs2_reflink ocfs2_inode_lock ... ocfs2_inode_unlock #now, refcount flag set on extent ... flush change to disk ocfs2_direct_IO_get_blocks ocfs2_get_clusters #extent map miss #buffer_head miss read extents from disk found refcount flag on extent crash.. Fix: Take rw_lock in ocfs2_reflink path Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

…s struct file commit e4daf1f upstream. The following call chain: ------------------------------------------------------------ nfs4_get_vfs_file - nfsd_open - dentry_open - do_dentry_open - __get_file_write_access - get_write_access - return atomic_inc_unless_negative(&inode->i_writecount) ? 0 : -ETXTBSY; ------------------------------------------------------------ can result in the following state: ------------------------------------------------------------ struct nfs4_file { ... fi_fds = {0xffff880c1fa65c80, 0xffffffffffffffe6, 0x0}, fi_access = {{ counter = 0x1 }, { counter = 0x0 }}, ... ------------------------------------------------------------ 1) First time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is NULL, hence nfsd_open() is called where we get status set to an error and fp->fi_fds[O_WRONLY] to -ETXTBSY. Thus we do not reach nfs4_file_get_access() and fi_access[O_WRONLY] is not incremented. 2) Second time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is NOT NULL (-ETXTBSY), so nfsd_open() is NOT called, but nfs4_file_get_access() IS called and fi_access[O_WRONLY] is incremented. Thus we leave a landmine in the form of the nfs4_file data structure in an incorrect state. 3) Eventually, when __nfs4_file_put_access() is called it finds fi_access[O_WRONLY] being non-zero, it decrements it and calls nfs4_file_put_fd() which tries to fput -ETXTBSY. ------------------------------------------------------------ ... [exception RIP: fput+0x9] RIP: ffffffff81177fa9 RSP: ffff88062e365c90 RFLAGS: 00010282 RAX: ffff880c2b3d99cc RBX: ffff880c2b3d9978 RCX: 0000000000000002 RDX: dead000000100101 RSI: 0000000000000001 RDI: ffffffffffffffe6 RBP: ffff88062e365c90 R8: ffff88041fe797d8 R9: ffff88062e365d58 R10: 0000000000000008 R11: 0000000000000000 R12: 0000000000000001 R13: 0000000000000007 R14: 0000000000000000 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #9 [ffff88062e365c98] __nfs4_file_put_access at ffffffffa0562334 [nfsd] #10 [ffff88062e365cc8] nfs4_file_put_access at ffffffffa05623ab [nfsd] #11 [ffff88062e365ce8] free_generic_stateid at ffffffffa056634d [nfsd] #12 [ffff88062e365d18] release_open_stateid at ffffffffa0566e4b [nfsd] #13 [ffff88062e365d38] nfsd4_close at ffffffffa0567401 [nfsd] #14 [ffff88062e365d88] nfsd4_proc_compound at ffffffffa0557f28 [nfsd] #15 [ffff88062e365dd8] nfsd_dispatch at ffffffffa054543e [nfsd] #16 [ffff88062e365e18] svc_process_common at ffffffffa04ba5a4 [sunrpc] #17 [ffff88062e365e98] svc_process at ffffffffa04babe0 [sunrpc] #18 [ffff88062e365eb8] nfsd at ffffffffa0545b62 [nfsd] #19 [ffff88062e365ee8] kthread at ffffffff81090886 #20 [ffff88062e365f48] kernel_thread at ffffffff8100c14a ------------------------------------------------------------ Signed-off-by: Harshula Jayasuriya <harshula@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> [xr: Backported to 3.4: adjust context] Signed-off-by: Rui Xiang <rui.xiang@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7cd2b0a upstream. Oleg reports a division by zero error on zero-length write() to the percpu_pagelist_fraction sysctl: divide error: 0000 [#1] SMP DEBUG_PAGEALLOC CPU: 1 PID: 9142 Comm: badarea_io Not tainted 3.15.0-rc2-vm-nfs+ #19 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8800d5aeb6e0 ti: ffff8800d87a2000 task.ti: ffff8800d87a2000 RIP: 0010: percpu_pagelist_fraction_sysctl_handler+0x84/0x120 RSP: 0018:ffff8800d87a3e78 EFLAGS: 00010246 RAX: 0000000000000f89 RBX: ffff88011f7fd000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000010 RBP: ffff8800d87a3e98 R08: ffffffff81d002c8 R09: ffff8800d87a3f50 R10: 000000000000000b R11: 0000000000000246 R12: 0000000000000060 R13: ffffffff81c3c3e0 R14: ffffffff81cfddf8 R15: ffff8801193b0800 FS: 00007f614f1e9740(0000) GS:ffff88011f440000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f614f1fa000 CR3: 00000000d9291000 CR4: 00000000000006e0 Call Trace: proc_sys_call_handler+0xb3/0xc0 proc_sys_write+0x14/0x20 vfs_write+0xba/0x1e0 SyS_write+0x46/0xb0 tracesys+0xe1/0xe6 However, if the percpu_pagelist_fraction sysctl is set by the user, it is also impossible to restore it to the kernel default since the user cannot write 0 to the sysctl. This patch allows the user to write 0 to restore the default behavior. It still requires a fraction equal to or larger than 8, however, as stated by the documentation for sanity. If a value in the range [1, 7] is written, the sysctl will return EINVAL. This successfully solves the divide by zero issue at the same time. Signed-off-by: David Rientjes <rientjes@google.com> Reported-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>

Mike Galbraith captered the following: | >hardkernel#11 [ffff88017b243e90] _raw_spin_lock at ffffffff815d2596 | >hardkernel#12 [ffff88017b243e90] rt_mutex_trylock at ffffffff815d15be | >hardkernel#13 [ffff88017b243eb0] get_next_timer_interrupt at ffffffff81063b42 | >hardkernel#14 [ffff88017b243f00] tick_nohz_stop_sched_tick at ffffffff810bd1fd | >hardkernel#15 [ffff88017b243f70] tick_nohz_irq_exit at ffffffff810bd7d2 | >hardkernel#16 [ffff88017b243f90] irq_exit at ffffffff8105b02d | >hardkernel#17 [ffff88017b243fb0] reschedule_interrupt at ffffffff815db3dd | >--- <IRQ stack> --- | >hardkernel#18 [ffff88017a2a9bc8] reschedule_interrupt at ffffffff815db3dd | > [exception RIP: task_blocks_on_rt_mutex+51] | >hardkernel#19 [ffff88017a2a9ce0] rt_spin_lock_slowlock at ffffffff815d183c | >hardkernel#20 [ffff88017a2a9da0] lock_timer_base.isra.35 at ffffffff81061cbf | >hardkernel#21 [ffff88017a2a9dd0] schedule_timeout at ffffffff815cf1ce | >hardkernel#22 [ffff88017a2a9e50] rcu_gp_kthread at ffffffff810f9bbb | >hardkernel#23 [ffff88017a2a9ed0] kthread at ffffffff810796d5 | >hardkernel#24 [ffff88017a2a9f50] ret_from_fork at ffffffff815da04c lock_timer_base() does a try_lock() which deadlocks on the waiter lock not the lock itself. This patch takes the waiter_lock with trylock so it should work from interrupt context as well. If the fastpath doesn't work and the waiter_lock itself is taken then it seems that the lock itself taken. This patch also adds a "rt_spin_try_unlock" to keep lockdep happy. If we managed to take the wait_lock in the first place we should also be able to take it in the unlock path. Cc: stable-rt@vger.kernel.org Reported-by: Mike Galbraith <bitbucket@online.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

Nikolay has reported a hang when a memcg reclaim got stuck with the following backtrace: PID: 18308 TASK: ffff883d7c9b0a30 CPU: 1 COMMAND: "rsync" #0 __schedule at ffffffff815ab152 hardkernel#1 schedule at ffffffff815ab76e hardkernel#2 schedule_timeout at ffffffff815ae5e5 hardkernel#3 io_schedule_timeout at ffffffff815aad6a hardkernel#4 bit_wait_io at ffffffff815abfc6 hardkernel#5 __wait_on_bit at ffffffff815abda5 hardkernel#6 wait_on_page_bit at ffffffff8111fd4f hardkernel#7 shrink_page_list at ffffffff81135445 hardkernel#8 shrink_inactive_list at ffffffff81135845 hardkernel#9 shrink_lruvec at ffffffff81135ead hardkernel#10 shrink_zone at ffffffff811360c3 hardkernel#11 shrink_zones at ffffffff81136eff hardkernel#12 do_try_to_free_pages at ffffffff8113712f hardkernel#13 try_to_free_mem_cgroup_pages at ffffffff811372be hardkernel#14 try_charge at ffffffff81189423 hardkernel#15 mem_cgroup_try_charge at ffffffff8118c6f5 hardkernel#16 __add_to_page_cache_locked at ffffffff8112137d hardkernel#17 add_to_page_cache_lru at ffffffff81121618 hardkernel#18 pagecache_get_page at ffffffff8112170b hardkernel#19 grow_dev_page at ffffffff811c8297 hardkernel#20 __getblk_slow at ffffffff811c91d6 hardkernel#21 __getblk_gfp at ffffffff811c92c1 hardkernel#22 ext4_ext_grow_indepth at ffffffff8124565c hardkernel#23 ext4_ext_create_new_leaf at ffffffff81246ca8 hardkernel#24 ext4_ext_insert_extent at ffffffff81246f09 hardkernel#25 ext4_ext_map_blocks at ffffffff8124a848 hardkernel#26 ext4_map_blocks at ffffffff8121a5b7 hardkernel#27 mpage_map_one_extent at ffffffff8121b1fa hardkernel#28 mpage_map_and_submit_extent at ffffffff8121f07b hardkernel#29 ext4_writepages at ffffffff8121f6d5 hardkernel#30 do_writepages at ffffffff8112c490 hardkernel#31 __filemap_fdatawrite_range at ffffffff81120199 hardkernel#32 filemap_flush at ffffffff8112041c hardkernel#33 ext4_alloc_da_blocks at ffffffff81219da1 hardkernel#34 ext4_rename at ffffffff81229b91 hardkernel#35 ext4_rename2 at ffffffff81229e32 hardkernel#36 vfs_rename at ffffffff811a08a5 hardkernel#37 SYSC_renameat2 at ffffffff811a3ffc hardkernel#38 sys_renameat2 at ffffffff811a408e hardkernel#39 sys_rename at ffffffff8119e51e hardkernel#40 system_call_fastpath at ffffffff815afa89 Dave Chinner has properly pointed out that this is a deadlock in the reclaim code because ext4 doesn't submit pages which are marked by PG_writeback right away. The heuristic was introduced by commit e62e384 ("memcg: prevent OOM with too many dirty pages") and it was applied only when may_enter_fs was specified. The code has been changed by c3b94f4 ("memcg: further prevent OOM with too many dirty pages") which has removed the __GFP_FS restriction with a reasoning that we do not get into the fs code. But this is not sufficient apparently because the fs doesn't necessarily submit pages marked PG_writeback for IO right away. ext4_bio_write_page calls io_submit_add_bh but that doesn't necessarily submit the bio. Instead it tries to map more pages into the bio and mpage_map_one_extent might trigger memcg charge which might end up waiting on a page which is marked PG_writeback but hasn't been submitted yet so we would end up waiting for something that never finishes. Fix this issue by replacing __GFP_IO by may_enter_fs check (for case 2) before we go to wait on the writeback. The page fault path, which is the only path that triggers memcg oom killer since 3.12, shouldn't require GFP_NOFS and so we shouldn't reintroduce the premature OOM killer issue which was originally addressed by the heuristic. As per David Chinner the xfs is doing similar thing since 2.6.15 already so ext4 is not the only affected filesystem. Moreover he notes: : For example: IO completion might require unwritten extent conversion : which executes filesystem transactions and GFP_NOFS allocations. The : writeback flag on the pages can not be cleared until unwritten : extent conversion completes. Hence memory reclaim cannot wait on : page writeback to complete in GFP_NOFS context because it is not : safe to do so, memcg reclaim or otherwise. Cc: stable@vger.kernel.org # 3.9+ [tytso@mit.edu: corrected the control flow] Fixes: c3b94f4 ("memcg: further prevent OOM with too many dirty pages") Reported-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tipc_msg_create() can return a NULL skb and if so, we shouldn't try to call tipc_node_xmit_skb() on it. general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 3 PID: 30298 Comm: trinity-c0 Not tainted 4.7.0-rc7+ hardkernel#19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff8800baf09980 ti: ffff8800595b8000 task.ti: ffff8800595b8000 RIP: 0010:[<ffffffff830bb46b>] [<ffffffff830bb46b>] tipc_node_xmit_skb+0x6b/0x140 RSP: 0018:ffff8800595bfce8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000003023b0e0 RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffffffff83d12580 RBP: ffff8800595bfd78 R08: ffffed000b2b7f32 R09: 0000000000000000 R10: fffffbfff0759725 R11: 0000000000000000 R12: 1ffff1000b2b7f9f R13: ffff8800595bfd58 R14: ffffffff83d12580 R15: dffffc0000000000 FS: 00007fcdde242700(0000) GS:ffff88011af80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcddde1db10 CR3: 000000006874b000 CR4: 00000000000006e0 DR0: 00007fcdde248000 DR1: 00007fcddd73d000 DR2: 00007fcdde248000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000090602 Stack: 0000000000000018 0000000000000018 0000000041b58ab3 ffffffff83954208 ffffffff830bb400 ffff8800595bfd30 ffffffff8309d767 0000000000000018 0000000000000018 ffff8800595bfd78 ffffffff8309da1a 00000000810ee611 Call Trace: [<ffffffff830c84a3>] tipc_shutdown+0x553/0x880 [<ffffffff825b4a3b>] SyS_shutdown+0x14b/0x170 [<ffffffff8100334c>] do_syscall_64+0x19c/0x410 [<ffffffff83295ca5>] entry_SYSCALL64_slow_path+0x25/0x25 Code: 90 00 b4 0b 83 c7 00 f1 f1 f1 f1 4c 8d 6d e0 c7 40 04 00 00 00 f4 c7 40 08 f3 f3 f3 f3 48 89 d8 48 c1 e8 03 c7 45 b4 00 00 00 00 <80> 3c 30 00 75 78 48 8d 7b 08 49 8d 75 c0 48 b8 00 00 00 00 00 RIP [<ffffffff830bb46b>] tipc_node_xmit_skb+0x6b/0x140 RSP <ffff8800595bfce8> ---[ end trace 57b0484e351e71f1 ]--- I feel like we should maybe return -ENOMEM or -ENOBUFS, but I'm not sure userspace is equipped to handle that. Anyway, this is better than a GPF and looks somewhat consistent with other tipc_msg_create() callers. Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>

[ Upstream commit 2bbea6e ] when mounting an ISO filesystem sometimes (very rarely) the system hangs because of a race condition between two tasks. PID: 6766 TASK: ffff88007b2a6dd0 CPU: 0 COMMAND: "mount" #0 [ffff880078447ae0] __schedule at ffffffff8168d605 #1 [ffff880078447b48] schedule_preempt_disabled at ffffffff8168ed49 #2 [ffff880078447b58] __mutex_lock_slowpath at ffffffff8168c995 hardkernel#3 [ffff880078447bb8] mutex_lock at ffffffff8168bdef hardkernel#4 [ffff880078447bd0] sr_block_ioctl at ffffffffa00b6818 [sr_mod] hardkernel#5 [ffff880078447c10] blkdev_ioctl at ffffffff812fea50 hardkernel#6 [ffff880078447c70] ioctl_by_bdev at ffffffff8123a8b3 hardkernel#7 [ffff880078447c90] isofs_fill_super at ffffffffa04fb1e1 [isofs] hardkernel#8 [ffff880078447da8] mount_bdev at ffffffff81202570 hardkernel#9 [ffff880078447e18] isofs_mount at ffffffffa04f9828 [isofs] hardkernel#10 [ffff880078447e28] mount_fs at ffffffff81202d09 hardkernel#11 [ffff880078447e70] vfs_kern_mount at ffffffff8121ea8f hardkernel#12 [ffff880078447ea8] do_mount at ffffffff81220fee hardkernel#13 [ffff880078447f28] sys_mount at ffffffff812218d6 hardkernel#14 [ffff880078447f80] system_call_fastpath at ffffffff81698c49 RIP: 00007fd9ea914e9a RSP: 00007ffd5d9bf648 RFLAGS: 00010246 RAX: 00000000000000a5 RBX: ffffffff81698c49 RCX: 0000000000000010 RDX: 00007fd9ec2bc210 RSI: 00007fd9ec2bc290 RDI: 00007fd9ec2bcf30 RBP: 0000000000000000 R8: 0000000000000000 R9: 0000000000000010 R10: 00000000c0ed0001 R11: 0000000000000206 R12: 00007fd9ec2bc040 R13: 00007fd9eb6b2380 R14: 00007fd9ec2bc210 R15: 00007fd9ec2bcf30 ORIG_RAX: 00000000000000a5 CS: 0033 SS: 002b This task was trying to mount the cdrom. It allocated and configured a super_block struct and owned the write-lock for the super_block->s_umount rwsem. While exclusively owning the s_umount lock, it called sr_block_ioctl and waited to acquire the global sr_mutex lock. PID: 6785 TASK: ffff880078720fb0 CPU: 0 COMMAND: "systemd-udevd" #0 [ffff880078417898] __schedule at ffffffff8168d605 #1 [ffff880078417900] schedule at ffffffff8168dc59 #2 [ffff880078417910] rwsem_down_read_failed at ffffffff8168f605 hardkernel#3 [ffff880078417980] call_rwsem_down_read_failed at ffffffff81328838 hardkernel#4 [ffff8800784179d0] down_read at ffffffff8168cde0 hardkernel#5 [ffff8800784179e8] get_super at ffffffff81201cc7 hardkernel#6 [ffff880078417a10] __invalidate_device at ffffffff8123a8de hardkernel#7 [ffff880078417a40] flush_disk at ffffffff8123a94b hardkernel#8 [ffff880078417a88] check_disk_change at ffffffff8123ab50 hardkernel#9 [ffff880078417ab0] cdrom_open at ffffffffa00a29e1 [cdrom] hardkernel#10 [ffff880078417b68] sr_block_open at ffffffffa00b6f9b [sr_mod] hardkernel#11 [ffff880078417b98] __blkdev_get at ffffffff8123ba86 hardkernel#12 [ffff880078417bf0] blkdev_get at ffffffff8123bd65 hardkernel#13 [ffff880078417c78] blkdev_open at ffffffff8123bf9b hardkernel#14 [ffff880078417c90] do_dentry_open at ffffffff811fc7f7 hardkernel#15 [ffff880078417cd8] vfs_open at ffffffff811fc9cf hardkernel#16 [ffff880078417d00] do_last at ffffffff8120d53d hardkernel#17 [ffff880078417db0] path_openat at ffffffff8120e6b2 hardkernel#18 [ffff880078417e48] do_filp_open at ffffffff8121082b hardkernel#19 [ffff880078417f18] do_sys_open at ffffffff811fdd33 hardkernel#20 [ffff880078417f70] sys_open at ffffffff811fde4e hardkernel#21 [ffff880078417f80] system_call_fastpath at ffffffff81698c49 RIP: 00007f29438b0c20 RSP: 00007ffc76624b78 RFLAGS: 00010246 RAX: 0000000000000002 RBX: ffffffff81698c49 RCX: 0000000000000000 RDX: 00007f2944a5fa70 RSI: 00000000000a0800 RDI: 00007f2944a5fa70 RBP: 00007f2944a5f540 R8: 0000000000000000 R9: 0000000000000020 R10: 00007f2943614c40 R11: 0000000000000246 R12: ffffffff811fde4e R13: ffff880078417f78 R14: 000000000000000c R15: 00007f2944a4b010 ORIG_RAX: 0000000000000002 CS: 0033 SS: 002b This task tried to open the cdrom device, the sr_block_open function acquired the global sr_mutex lock. The call to check_disk_change() then saw an event flag indicating a possible media change and tried to flush any cached data for the device. As part of the flush, it tried to acquire the super_block->s_umount lock associated with the cdrom device. This was the same super_block as created and locked by the previous task. The first task acquires the s_umount lock and then the sr_mutex_lock; the second task acquires the sr_mutex_lock and then the s_umount lock. This patch fixes the issue by moving check_disk_change() out of cdrom_open() and let the caller take care of it. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a04f001 upstream. A spinlock is held while updating the internal copy of the IRQ mask, but not while writing it to the actual IMASK register. After the lock is released, an IRQ can occur before the IMASK register is written. If handling this IRQ causes the mask to be changed, when the handler returns back to the middle of the first mask update, a stale value will be written to the mask register. If this causes an IRQ to become unmasked that cannot have its status cleared by writing a 1 to it in the IREG register, e.g. the SDIO IRQ, then we can end up stuck with the same IRQ repeatedly being fired but not handled. Normally the MMC IRQ handler attempts to clear any unexpected IRQs by writing IREG, but for those that cannot be cleared in this way then the IRQ will just repeatedly fire. This was resulting in lockups after a while of using Wi-Fi on the CI20 (GitHub issue #19). Resolve by holding the spinlock until after the IMASK register has been updated. Link: MIPS#19 Fixes: 61bfbdb ("MMC: Add support for the controller on JZ4740 SoCs.") Tested-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 6f6060a upstream. APM_DO_POP_SEGS does not restore fs/gs which were zeroed by APM_DO_ZERO_SEGS. Trying to access __preempt_count with zeroed fs doesn't really work. Move the ibrs call outside the APM_DO_SAVE_SEGS/APM_DO_RESTORE_SEGS invocations so that fs is actually restored before calling preempt_enable(). Fixes the following sort of oopses: [ 0.313581] general protection fault: 0000 [#1] PREEMPT SMP [ 0.313803] Modules linked in: [ 0.314040] CPU: 0 PID: 268 Comm: kapmd Not tainted 4.16.0-rc1-triton-bisect-00090-gdd84441a7971 #19 [ 0.316161] EIP: __apm_bios_call_simple+0xc8/0x170 [ 0.316161] EFLAGS: 00210016 CPU: 0 [ 0.316161] EAX: 00000102 EBX: 00000000 ECX: 00000102 EDX: 00000000 [ 0.316161] ESI: 0000530e EDI: dea95f64 EBP: dea95f18 ESP: dea95ef0 [ 0.316161] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 [ 0.316161] CR0: 80050033 CR2: 00000000 CR3: 015d3000 CR4: 000006d0 [ 0.316161] Call Trace: [ 0.316161] ? cpumask_weight.constprop.15+0x20/0x20 [ 0.316161] on_cpu0+0x44/0x70 [ 0.316161] apm+0x54e/0x720 [ 0.316161] ? __switch_to_asm+0x26/0x40 [ 0.316161] ? __schedule+0x17d/0x590 [ 0.316161] kthread+0xc0/0xf0 [ 0.316161] ? proc_apm_show+0x150/0x150 [ 0.316161] ? kthread_create_worker_on_cpu+0x20/0x20 [ 0.316161] ret_from_fork+0x2e/0x38 [ 0.316161] Code: da 8e c2 8e e2 8e ea 57 55 2e ff 1d e0 bb 5d b1 0f 92 c3 5d 5f 07 1f 89 47 0c 90 8d b4 26 00 00 00 00 90 8d b4 26 00 00 00 00 90 <64> ff 0d 84 16 5c b1 74 7f 8b 45 dc 8e e0 8b 45 d8 8e e8 8b 45 [ 0.316161] EIP: __apm_bios_call_simple+0xc8/0x170 SS:ESP: 0068:dea95ef0 [ 0.316161] ---[ end trace 656253db2deaa12c ]--- Fixes: dd84441 ("x86/speculation: Use IBRS if available before calling into firmware") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: "H. Peter Anvin" <hpa@zytor.com> Link: https://lkml.kernel.org/r/20180709133534.5963-1-ville.syrjala@linux.intel.com Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit a5ba1d9 upstream. We have reports of the following crash: PID: 7 TASK: ffff88085c6d61c0 CPU: 1 COMMAND: "kworker/u25:0" #0 [ffff88085c6db710] machine_kexec at ffffffff81046239 #1 [ffff88085c6db760] crash_kexec at ffffffff810fc248 #2 [ffff88085c6db830] oops_end at ffffffff81008ae7 #3 [ffff88085c6db860] no_context at ffffffff81050b8f #4 [ffff88085c6db8b0] __bad_area_nosemaphore at ffffffff81050d75 #5 [ffff88085c6db900] bad_area_nosemaphore at ffffffff81050e83 #6 [ffff88085c6db910] __do_page_fault at ffffffff8105132e #7 [ffff88085c6db9b0] do_page_fault at ffffffff8105152c #8 [ffff88085c6db9c0] page_fault at ffffffff81a3f122 [exception RIP: uart_put_char+149] RIP: ffffffff814b67b5 RSP: ffff88085c6dba78 RFLAGS: 00010006 RAX: 0000000000000292 RBX: ffffffff827c5120 RCX: 0000000000000081 RDX: 0000000000000000 RSI: 000000000000005f RDI: ffffffff827c5120 RBP: ffff88085c6dba98 R8: 000000000000012c R9: ffffffff822ea320 R10: ffff88085fe4db04 R11: 0000000000000001 R12: ffff881059f9c000 R13: 0000000000000001 R14: 000000000000005f R15: 0000000000000fba ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #9 [ffff88085c6dbaa0] tty_put_char at ffffffff81497544 #10 [ffff88085c6dbac0] do_output_char at ffffffff8149c91c #11 [ffff88085c6dbae0] __process_echoes at ffffffff8149cb8b #12 [ffff88085c6dbb30] commit_echoes at ffffffff8149cdc2 #13 [ffff88085c6dbb60] n_tty_receive_buf_fast at ffffffff8149e49b #14 [ffff88085c6dbbc0] __receive_buf at ffffffff8149ef5a #15 [ffff88085c6dbc20] n_tty_receive_buf_common at ffffffff8149f016 #16 [ffff88085c6dbca0] n_tty_receive_buf2 at ffffffff8149f194 #17 [ffff88085c6dbcb0] flush_to_ldisc at ffffffff814a238a #18 [ffff88085c6dbd50] process_one_work at ffffffff81090be2 #19 [ffff88085c6dbe20] worker_thread at ffffffff81091b4d #20 [ffff88085c6dbeb0] kthread at ffffffff81096384 #21 [ffff88085c6dbf50] ret_from_fork at ffffffff81a3d69f after slogging through some dissasembly: ffffffff814b6720 <uart_put_char>: ffffffff814b6720: 55 push %rbp ffffffff814b6721: 48 89 e5 mov %rsp,%rbp ffffffff814b6724: 48 83 ec 20 sub $0x20,%rsp ffffffff814b6728: 48 89 1c 24 mov %rbx,(%rsp) ffffffff814b672c: 4c 89 64 24 08 mov %r12,0x8(%rsp) ffffffff814b6731: 4c 89 6c 24 10 mov %r13,0x10(%rsp) ffffffff814b6736: 4c 89 74 24 18 mov %r14,0x18(%rsp) ffffffff814b673b: e8 b0 8e 58 00 callq ffffffff81a3f5f0 <mcount> ffffffff814b6740: 4c 8b a7 88 02 00 00 mov 0x288(%rdi),%r12 ffffffff814b6747: 45 31 ed xor %r13d,%r13d ffffffff814b674a: 41 89 f6 mov %esi,%r14d ffffffff814b674d: 49 83 bc 24 70 01 00 cmpq $0x0,0x170(%r12) ffffffff814b6754: 00 00 ffffffff814b6756: 49 8b 9c 24 80 01 00 mov 0x180(%r12),%rbx ffffffff814b675d: 00 ffffffff814b675e: 74 2f je ffffffff814b678f <uart_put_char+0x6f> ffffffff814b6760: 48 89 df mov %rbx,%rdi ffffffff814b6763: e8 a8 67 58 00 callq ffffffff81a3cf10 <_raw_spin_lock_irqsave> ffffffff814b6768: 41 8b 8c 24 78 01 00 mov 0x178(%r12),%ecx ffffffff814b676f: 00 ffffffff814b6770: 89 ca mov %ecx,%edx ffffffff814b6772: f7 d2 not %edx ffffffff814b6774: 41 03 94 24 7c 01 00 add 0x17c(%r12),%edx ffffffff814b677b: 00 ffffffff814b677c: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b6782: 75 23 jne ffffffff814b67a7 <uart_put_char+0x87> ffffffff814b6784: 48 89 c6 mov %rax,%rsi ffffffff814b6787: 48 89 df mov %rbx,%rdi ffffffff814b678a: e8 e1 64 58 00 callq ffffffff81a3cc70 <_raw_spin_unlock_irqrestore> ffffffff814b678f: 44 89 e8 mov %r13d,%eax ffffffff814b6792: 48 8b 1c 24 mov (%rsp),%rbx ffffffff814b6796: 4c 8b 64 24 08 mov 0x8(%rsp),%r12 ffffffff814b679b: 4c 8b 6c 24 10 mov 0x10(%rsp),%r13 ffffffff814b67a0: 4c 8b 74 24 18 mov 0x18(%rsp),%r14 ffffffff814b67a5: c9 leaveq ffffffff814b67a6: c3 retq ffffffff814b67a7: 49 8b 94 24 70 01 00 mov 0x170(%r12),%rdx ffffffff814b67ae: 00 ffffffff814b67af: 48 63 c9 movslq %ecx,%rcx ffffffff814b67b2: 41 b5 01 mov $0x1,%r13b ffffffff814b67b5: 44 88 34 0a mov %r14b,(%rdx,%rcx,1) ffffffff814b67b9: 41 8b 94 24 78 01 00 mov 0x178(%r12),%edx ffffffff814b67c0: 00 ffffffff814b67c1: 83 c2 01 add $0x1,%edx ffffffff814b67c4: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b67ca: 41 89 94 24 78 01 00 mov %edx,0x178(%r12) ffffffff814b67d1: 00 ffffffff814b67d2: eb b0 jmp ffffffff814b6784 <uart_put_char+0x64> ffffffff814b67d4: 66 66 66 2e 0f 1f 84 data32 data32 nopw %cs:0x0(%rax,%rax,1) ffffffff814b67db: 00 00 00 00 00 for our build, this is crashing at: circ->buf[circ->head] = c; Looking in uart_port_startup(), it seems that circ->buf (state->xmit.buf) protected by the "per-port mutex", which based on uart_port_check() is state->port.mutex. Indeed, the lock acquired in uart_put_char() is uport->lock, i.e. not the same lock. Anyway, since the lock is not acquired, if uart_shutdown() is called, the last chunk of that function may release state->xmit.buf before its assigned to null, and cause the race above. To fix it, let's lock uport->lock when allocating/deallocating state->xmit.buf in addition to the per-port mutex. v2: switch to locking uport->lock on allocation/deallocation instead of locking the per-port mutex in uart_put_char. Note that since uport->lock is a spin lock, we have to switch the allocation to GFP_ATOMIC. v3: move the allocation outside the lock, so we can switch back to GFP_KERNEL Signed-off-by: Tycho Andersen <tycho@tycho.ws> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.16: Use uport->lock directly rather than through uart_port_{,un}lock()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

A deadlock with this stacktrace was observed. The loop thread does a GFP_KERNEL allocation, it calls into dm-bufio shrinker and the shrinker depends on I/O completion in the dm-bufio subsystem. In order to fix the deadlock (and other similar ones), we set the flag PF_MEMALLOC_NOIO at loop thread entry. PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0" #0 [ffff8813dedfb938] __schedule at ffffffff8173f405 #1 [ffff8813dedfb990] schedule at ffffffff8173fa27 #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec hardkernel#3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186 hardkernel#4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f hardkernel#5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8 hardkernel#6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81 hardkernel#7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio] hardkernel#8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio] hardkernel#9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio] hardkernel#10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce hardkernel#11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778 hardkernel#12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f hardkernel#13 [ffff8813dedfbec0] kthread at ffffffff810a8428 hardkernel#14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242 PID: 14127 TASK: ffff881455749c00 CPU: 11 COMMAND: "loop1" #0 [ffff88272f5af228] __schedule at ffffffff8173f405 #1 [ffff88272f5af280] schedule at ffffffff8173fa27 #2 [ffff88272f5af2a0] schedule_preempt_disabled at ffffffff8173fd5e hardkernel#3 [ffff88272f5af2b0] __mutex_lock_slowpath at ffffffff81741fb5 hardkernel#4 [ffff88272f5af330] mutex_lock at ffffffff81742133 hardkernel#5 [ffff88272f5af350] dm_bufio_shrink_count at ffffffffa03865f9 [dm_bufio] hardkernel#6 [ffff88272f5af380] shrink_slab at ffffffff811a86bd hardkernel#7 [ffff88272f5af470] shrink_zone at ffffffff811ad778 hardkernel#8 [ffff88272f5af500] do_try_to_free_pages at ffffffff811adb34 hardkernel#9 [ffff88272f5af590] try_to_free_pages at ffffffff811adef8 hardkernel#10 [ffff88272f5af610] __alloc_pages_nodemask at ffffffff811a09c3 hardkernel#11 [ffff88272f5af710] alloc_pages_current at ffffffff811e8b71 hardkernel#12 [ffff88272f5af760] new_slab at ffffffff811f4523 hardkernel#13 [ffff88272f5af7b0] __slab_alloc at ffffffff8173a1b5 hardkernel#14 [ffff88272f5af880] kmem_cache_alloc at ffffffff811f484b hardkernel#15 [ffff88272f5af8d0] do_blockdev_direct_IO at ffffffff812535b3 hardkernel#16 [ffff88272f5afb00] __blockdev_direct_IO at ffffffff81255dc3 hardkernel#17 [ffff88272f5afb30] xfs_vm_direct_IO at ffffffffa01fe3fc [xfs] hardkernel#18 [ffff88272f5afb90] generic_file_read_iter at ffffffff81198994 hardkernel#19 [ffff88272f5afc50] __dta_xfs_file_read_iter_2398 at ffffffffa020c970 [xfs] hardkernel#20 [ffff88272f5afcc0] lo_rw_aio at ffffffffa0377042 [loop] hardkernel#21 [ffff88272f5afd70] loop_queue_work at ffffffffa0377c3b [loop] hardkernel#22 [ffff88272f5afe60] kthread_worker_fn at ffffffff810a8a0c hardkernel#23 [ffff88272f5afec0] kthread at ffffffff810a8428 hardkernel#24 [ffff88272f5aff50] ret_from_fork at ffffffff81745242 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>

commit d0a255e upstream. A deadlock with this stacktrace was observed. The loop thread does a GFP_KERNEL allocation, it calls into dm-bufio shrinker and the shrinker depends on I/O completion in the dm-bufio subsystem. In order to fix the deadlock (and other similar ones), we set the flag PF_MEMALLOC_NOIO at loop thread entry. PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0" #0 [ffff8813dedfb938] __schedule at ffffffff8173f405 #1 [ffff8813dedfb990] schedule at ffffffff8173fa27 #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186 #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f #5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8 #6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81 #7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio] #8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio] #9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio] #10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce #11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778 #12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f #13 [ffff8813dedfbec0] kthread at ffffffff810a8428 #14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242 PID: 14127 TASK: ffff881455749c00 CPU: 11 COMMAND: "loop1" #0 [ffff88272f5af228] __schedule at ffffffff8173f405 #1 [ffff88272f5af280] schedule at ffffffff8173fa27 #2 [ffff88272f5af2a0] schedule_preempt_disabled at ffffffff8173fd5e #3 [ffff88272f5af2b0] __mutex_lock_slowpath at ffffffff81741fb5 #4 [ffff88272f5af330] mutex_lock at ffffffff81742133 #5 [ffff88272f5af350] dm_bufio_shrink_count at ffffffffa03865f9 [dm_bufio] #6 [ffff88272f5af380] shrink_slab at ffffffff811a86bd #7 [ffff88272f5af470] shrink_zone at ffffffff811ad778 #8 [ffff88272f5af500] do_try_to_free_pages at ffffffff811adb34 #9 [ffff88272f5af590] try_to_free_pages at ffffffff811adef8 #10 [ffff88272f5af610] __alloc_pages_nodemask at ffffffff811a09c3 #11 [ffff88272f5af710] alloc_pages_current at ffffffff811e8b71 #12 [ffff88272f5af760] new_slab at ffffffff811f4523 #13 [ffff88272f5af7b0] __slab_alloc at ffffffff8173a1b5 #14 [ffff88272f5af880] kmem_cache_alloc at ffffffff811f484b #15 [ffff88272f5af8d0] do_blockdev_direct_IO at ffffffff812535b3 #16 [ffff88272f5afb00] __blockdev_direct_IO at ffffffff81255dc3 #17 [ffff88272f5afb30] xfs_vm_direct_IO at ffffffffa01fe3fc [xfs] #18 [ffff88272f5afb90] generic_file_read_iter at ffffffff81198994 #19 [ffff88272f5afc50] __dta_xfs_file_read_iter_2398 at ffffffffa020c970 [xfs] #20 [ffff88272f5afcc0] lo_rw_aio at ffffffffa0377042 [loop] #21 [ffff88272f5afd70] loop_queue_work at ffffffffa0377c3b [loop] #22 [ffff88272f5afe60] kthread_worker_fn at ffffffff810a8a0c #23 [ffff88272f5afec0] kthread at ffffffff810a8428 #24 [ffff88272f5aff50] ret_from_fork at ffffffff81745242 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f9c6456 upstream. Masoud Sharbiani noticed that commit 29ef680 ("memcg, oom: move out_of_memory back to the charge path") broke memcg OOM called from __xfs_filemap_fault() path. It turned out that try_charge() is retrying forever without making forward progress because mem_cgroup_oom(GFP_NOFS) cannot invoke the OOM killer due to commit 3da88fb ("mm, oom: move GFP_NOFS check to out_of_memory"). Allowing forced charge due to being unable to invoke memcg OOM killer will lead to global OOM situation. Also, just returning -ENOMEM will be risky because OOM path is lost and some paths (e.g. get_user_pages()) will leak -ENOMEM. Therefore, invoking memcg OOM killer (despite GFP_NOFS) will be the only choice we can choose for now. Until 29ef680, we were able to invoke memcg OOM killer when GFP_KERNEL reclaim failed [1]. But since 29ef680, we need to invoke memcg OOM killer when GFP_NOFS reclaim failed [2]. Although in the past we did invoke memcg OOM killer for GFP_NOFS [3], we might get pre-mature memcg OOM reports due to this patch. [1] leaker invoked oom-killer: gfp_mask=0x6200ca(GFP_HIGHUSER_MOVABLE), nodemask=(null), order=0, oom_score_adj=0 CPU: 0 PID: 2746 Comm: leaker Not tainted 4.18.0+ #19 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/13/2018 Call Trace: dump_stack+0x63/0x88 dump_header+0x67/0x27a ? mem_cgroup_scan_tasks+0x91/0xf0 oom_kill_process+0x210/0x410 out_of_memory+0x10a/0x2c0 mem_cgroup_out_of_memory+0x46/0x80 mem_cgroup_oom_synchronize+0x2e4/0x310 ? high_work_func+0x20/0x20 pagefault_out_of_memory+0x31/0x76 mm_fault_error+0x55/0x115 ? handle_mm_fault+0xfd/0x220 __do_page_fault+0x433/0x4e0 do_page_fault+0x22/0x30 ? page_fault+0x8/0x30 page_fault+0x1e/0x30 RIP: 0033:0x4009f0 Code: 03 00 00 00 e8 71 fd ff ff 48 83 f8 ff 49 89 c6 74 74 48 89 c6 bf c0 0c 40 00 31 c0 e8 69 fd ff ff 45 85 ff 7e 21 31 c9 66 90 <41> 0f be 14 0e 01 d3 f7 c1 ff 0f 00 00 75 05 41 c6 04 0e 2a 48 83 RSP: 002b:00007ffe29ae96f0 EFLAGS: 00010206 RAX: 000000000000001b RBX: 0000000000000000 RCX: 0000000001ce1000 RDX: 0000000000000000 RSI: 000000007fffffe5 RDI: 0000000000000000 RBP: 000000000000000c R08: 0000000000000000 R09: 00007f94be09220d R10: 0000000000000002 R11: 0000000000000246 R12: 00000000000186a0 R13: 0000000000000003 R14: 00007f949d845000 R15: 0000000002800000 Task in /leaker killed as a result of limit of /leaker memory: usage 524288kB, limit 524288kB, failcnt 158965 memory+swap: usage 0kB, limit 9007199254740988kB, failcnt 0 kmem: usage 2016kB, limit 9007199254740988kB, failcnt 0 Memory cgroup stats for /leaker: cache:844KB rss:521136KB rss_huge:0KB shmem:0KB mapped_file:0KB dirty:132KB writeback:0KB inactive_anon:0KB active_anon:521224KB inactive_file:1012KB active_file:8KB unevictable:0KB Memory cgroup out of memory: Kill process 2746 (leaker) score 998 or sacrifice child Killed process 2746 (leaker) total-vm:536704kB, anon-rss:521176kB, file-rss:1208kB, shmem-rss:0kB oom_reaper: reaped process 2746 (leaker), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB [2] leaker invoked oom-killer: gfp_mask=0x600040(GFP_NOFS), nodemask=(null), order=0, oom_score_adj=0 CPU: 1 PID: 2746 Comm: leaker Not tainted 4.18.0+ #20 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/13/2018 Call Trace: dump_stack+0x63/0x88 dump_header+0x67/0x27a ? mem_cgroup_scan_tasks+0x91/0xf0 oom_kill_process+0x210/0x410 out_of_memory+0x109/0x2d0 mem_cgroup_out_of_memory+0x46/0x80 try_charge+0x58d/0x650 ? __radix_tree_replace+0x81/0x100 mem_cgroup_try_charge+0x7a/0x100 __add_to_page_cache_locked+0x92/0x180 add_to_page_cache_lru+0x4d/0xf0 iomap_readpages_actor+0xde/0x1b0 ? iomap_zero_range_actor+0x1d0/0x1d0 iomap_apply+0xaf/0x130 iomap_readpages+0x9f/0x150 ? iomap_zero_range_actor+0x1d0/0x1d0 xfs_vm_readpages+0x18/0x20 [xfs] read_pages+0x60/0x140 __do_page_cache_readahead+0x193/0x1b0 ondemand_readahead+0x16d/0x2c0 page_cache_async_readahead+0x9a/0xd0 filemap_fault+0x403/0x620 ? alloc_set_pte+0x12c/0x540 ? _cond_resched+0x14/0x30 __xfs_filemap_fault+0x66/0x180 [xfs] xfs_filemap_fault+0x27/0x30 [xfs] __do_fault+0x19/0x40 __handle_mm_fault+0x8e8/0xb60 handle_mm_fault+0xfd/0x220 __do_page_fault+0x238/0x4e0 do_page_fault+0x22/0x30 ? page_fault+0x8/0x30 page_fault+0x1e/0x30 RIP: 0033:0x4009f0 Code: 03 00 00 00 e8 71 fd ff ff 48 83 f8 ff 49 89 c6 74 74 48 89 c6 bf c0 0c 40 00 31 c0 e8 69 fd ff ff 45 85 ff 7e 21 31 c9 66 90 <41> 0f be 14 0e 01 d3 f7 c1 ff 0f 00 00 75 05 41 c6 04 0e 2a 48 83 RSP: 002b:00007ffda45c9290 EFLAGS: 00010206 RAX: 000000000000001b RBX: 0000000000000000 RCX: 0000000001a1e000 RDX: 0000000000000000 RSI: 000000007fffffe5 RDI: 0000000000000000 RBP: 000000000000000c R08: 0000000000000000 R09: 00007f6d061ff20d R10: 0000000000000002 R11: 0000000000000246 R12: 00000000000186a0 R13: 0000000000000003 R14: 00007f6ce59b2000 R15: 0000000002800000 Task in /leaker killed as a result of limit of /leaker memory: usage 524288kB, limit 524288kB, failcnt 7221 memory+swap: usage 0kB, limit 9007199254740988kB, failcnt 0 kmem: usage 1944kB, limit 9007199254740988kB, failcnt 0 Memory cgroup stats for /leaker: cache:3632KB rss:518232KB rss_huge:0KB shmem:0KB mapped_file:0KB dirty:0KB writeback:0KB inactive_anon:0KB active_anon:518408KB inactive_file:3908KB active_file:12KB unevictable:0KB Memory cgroup out of memory: Kill process 2746 (leaker) score 992 or sacrifice child Killed process 2746 (leaker) total-vm:536704kB, anon-rss:518264kB, file-rss:1188kB, shmem-rss:0kB oom_reaper: reaped process 2746 (leaker), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB [3] leaker invoked oom-killer: gfp_mask=0x50, order=0, oom_score_adj=0 leaker cpuset=/ mems_allowed=0 CPU: 1 PID: 3206 Comm: leaker Not tainted 3.10.0-957.27.2.el7.x86_64 #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/13/2018 Call Trace: [<ffffffffaf364147>] dump_stack+0x19/0x1b [<ffffffffaf35eb6a>] dump_header+0x90/0x229 [<ffffffffaedbb456>] ? find_lock_task_mm+0x56/0xc0 [<ffffffffaee32a38>] ? try_get_mem_cgroup_from_mm+0x28/0x60 [<ffffffffaedbb904>] oom_kill_process+0x254/0x3d0 [<ffffffffaee36c36>] mem_cgroup_oom_synchronize+0x546/0x570 [<ffffffffaee360b0>] ? mem_cgroup_charge_common+0xc0/0xc0 [<ffffffffaedbc194>] pagefault_out_of_memory+0x14/0x90 [<ffffffffaf35d072>] mm_fault_error+0x6a/0x157 [<ffffffffaf3717c8>] __do_page_fault+0x3c8/0x4f0 [<ffffffffaf371925>] do_page_fault+0x35/0x90 [<ffffffffaf36d768>] page_fault+0x28/0x30 Task in /leaker killed as a result of limit of /leaker memory: usage 524288kB, limit 524288kB, failcnt 20628 memory+swap: usage 524288kB, limit 9007199254740988kB, failcnt 0 kmem: usage 0kB, limit 9007199254740988kB, failcnt 0 Memory cgroup stats for /leaker: cache:840KB rss:523448KB rss_huge:0KB mapped_file:0KB swap:0KB inactive_anon:0KB active_anon:523448KB inactive_file:464KB active_file:376KB unevictable:0KB Memory cgroup out of memory: Kill process 3206 (leaker) score 970 or sacrifice child Killed process 3206 (leaker) total-vm:536692kB, anon-rss:523304kB, file-rss:412kB, shmem-rss:0kB Bisected by Masoud Sharbiani. Link: http://lkml.kernel.org/r/cbe54ed1-b6ba-a056-8899-2dc42526371d@i-love.sakura.ne.jp Fixes: 3da88fb ("mm, oom: move GFP_NOFS check to out_of_memory") [necessary after 29ef680] Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: Masoud Sharbiani <msharbiani@apple.com> Tested-by: Masoud Sharbiani <msharbiani@apple.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> [4.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When the client hits reconnect it iterates over the mid pending queue marking entries for retry and moving them to a temporary list to issue callbacks later without holding GlobalMid_Lock. In the same time there is no guarantee that mids can't be removed from the temporary list or even freed completely by another thread. It may cause a temporary list corruption: [ 430.454897] list_del corruption. prev->next should be ffff98d3a8f316c0, but was 2e885cb266355469 [ 430.464668] ------------[ cut here ]------------ [ 430.466569] kernel BUG at lib/list_debug.c:51! [ 430.468476] invalid opcode: 0000 [hardkernel#1] SMP PTI [ 430.470286] CPU: 0 PID: 13267 Comm: cifsd Kdump: loaded Not tainted 5.4.0-rc3+ hardkernel#19 [ 430.473472] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 430.475872] RIP: 0010:__list_del_entry_valid.cold+0x31/0x55 ... [ 430.510426] Call Trace: [ 430.511500] cifs_reconnect+0x25e/0x610 [cifs] [ 430.513350] cifs_readv_from_socket+0x220/0x250 [cifs] [ 430.515464] cifs_read_from_socket+0x4a/0x70 [cifs] [ 430.517452] ? try_to_wake_up+0x212/0x650 [ 430.519122] ? cifs_small_buf_get+0x16/0x30 [cifs] [ 430.521086] ? allocate_buffers+0x66/0x120 [cifs] [ 430.523019] cifs_demultiplex_thread+0xdc/0xc30 [cifs] [ 430.525116] kthread+0xfb/0x130 [ 430.526421] ? cifs_handle_standard+0x190/0x190 [cifs] [ 430.528514] ? kthread_park+0x90/0x90 [ 430.530019] ret_from_fork+0x35/0x40 Fix this by obtaining extra references for mids being retried and marking them as MID_DELETED which indicates that such a mid has been dequeued from the pending list. Also move mid cleanup logic from DeleteMidQEntry to _cifs_mid_q_entry_release which is called when the last reference to a particular mid is put. This allows to avoid any use-after-free of response buffers. The patch needs to be backported to stable kernels. A stable tag is not mentioned below because the patch doesn't apply cleanly to any actively maintained stable kernel. Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-and-tested-by: David Wysochanski <dwysocha@redhat.com> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>

[ Upstream commit 1bc7896 ] When experimenting with bpf_send_signal() helper in our production environment (5.2 based), we experienced a deadlock in NMI mode: #5 [ffffc9002219f770] queued_spin_lock_slowpath at ffffffff8110be24 #6 [ffffc9002219f770] _raw_spin_lock_irqsave at ffffffff81a43012 #7 [ffffc9002219f780] try_to_wake_up at ffffffff810e7ecd #8 [ffffc9002219f7e0] signal_wake_up_state at ffffffff810c7b55 #9 [ffffc9002219f7f0] __send_signal at ffffffff810c8602 #10 [ffffc9002219f830] do_send_sig_info at ffffffff810ca31a #11 [ffffc9002219f868] bpf_send_signal at ffffffff8119d227 #12 [ffffc9002219f988] bpf_overflow_handler at ffffffff811d4140 #13 [ffffc9002219f9e0] __perf_event_overflow at ffffffff811d68cf #14 [ffffc9002219fa10] perf_swevent_overflow at ffffffff811d6a09 #15 [ffffc9002219fa38] ___perf_sw_event at ffffffff811e0f47 #16 [ffffc9002219fc30] __schedule at ffffffff81a3e04d #17 [ffffc9002219fc90] schedule at ffffffff81a3e219 #18 [ffffc9002219fca0] futex_wait_queue_me at ffffffff8113d1b9 #19 [ffffc9002219fcd8] futex_wait at ffffffff8113e529 #20 [ffffc9002219fdf0] do_futex at ffffffff8113ffbc #21 [ffffc9002219fec0] __x64_sys_futex at ffffffff81140d1c #22 [ffffc9002219ff38] do_syscall_64 at ffffffff81002602 #23 [ffffc9002219ff50] entry_SYSCALL_64_after_hwframe at ffffffff81c00068 The above call stack is actually very similar to an issue reported by Commit eac9153 ("bpf/stackmap: Fix deadlock with rq_lock in bpf_get_stack()") by Song Liu. The only difference is bpf_send_signal() helper instead of bpf_get_stack() helper. The above deadlock is triggered with a perf_sw_event. Similar to Commit eac9153, the below almost identical reproducer used tracepoint point sched/sched_switch so the issue can be easily caught. /* stress_test.c */ #include <stdio.h> #include <stdlib.h> #include <sys/mman.h> #include <pthread.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #define THREAD_COUNT 1000 char *filename; void *worker(void *p) { void *ptr; int fd; char *pptr; fd = open(filename, O_RDONLY); if (fd < 0) return NULL; while (1) { struct timespec ts = {0, 1000 + rand() % 2000}; ptr = mmap(NULL, 4096 * 64, PROT_READ, MAP_PRIVATE, fd, 0); usleep(1); if (ptr == MAP_FAILED) { printf("failed to mmap\n"); break; } munmap(ptr, 4096 * 64); usleep(1); pptr = malloc(1); usleep(1); pptr[0] = 1; usleep(1); free(pptr); usleep(1); nanosleep(&ts, NULL); } close(fd); return NULL; } int main(int argc, char *argv[]) { void *ptr; int i; pthread_t threads[THREAD_COUNT]; if (argc < 2) return 0; filename = argv[1]; for (i = 0; i < THREAD_COUNT; i++) { if (pthread_create(threads + i, NULL, worker, NULL)) { fprintf(stderr, "Error creating thread\n"); return 0; } } for (i = 0; i < THREAD_COUNT; i++) pthread_join(threads[i], NULL); return 0; } and the following command: 1. run `stress_test /bin/ls` in one windown 2. hack bcc trace.py with the following change: # --- a/tools/trace.py # +++ b/tools/trace.py @@ -513,6 +513,7 @@ BPF_PERF_OUTPUT(%s); __data.tgid = __tgid; __data.pid = __pid; bpf_get_current_comm(&__data.comm, sizeof(__data.comm)); + bpf_send_signal(10); %s %s %s.perf_submit(%s, &__data, sizeof(__data)); 3. in a different window run ./trace.py -p $(pidof stress_test) t:sched:sched_switch The deadlock can be reproduced in our production system. Similar to Song's fix, the fix is to delay sending signal if irqs is disabled to avoid deadlocks involving with rq_lock. With this change, my above stress-test in our production system won't cause deadlock any more. I also implemented a scale-down version of reproducer in the selftest (a subsequent commit). With latest bpf-next, it complains for the following potential deadlock. [ 32.832450] -> #1 (&p->pi_lock){-.-.}: [ 32.833100] _raw_spin_lock_irqsave+0x44/0x80 [ 32.833696] task_rq_lock+0x2c/0xa0 [ 32.834182] task_sched_runtime+0x59/0xd0 [ 32.834721] thread_group_cputime+0x250/0x270 [ 32.835304] thread_group_cputime_adjusted+0x2e/0x70 [ 32.835959] do_task_stat+0x8a7/0xb80 [ 32.836461] proc_single_show+0x51/0xb0 ... [ 32.839512] -> #0 (&(&sighand->siglock)->rlock){....}: [ 32.840275] __lock_acquire+0x1358/0x1a20 [ 32.840826] lock_acquire+0xc7/0x1d0 [ 32.841309] _raw_spin_lock_irqsave+0x44/0x80 [ 32.841916] __lock_task_sighand+0x79/0x160 [ 32.842465] do_send_sig_info+0x35/0x90 [ 32.842977] bpf_send_signal+0xa/0x10 [ 32.843464] bpf_prog_bc13ed9e4d3163e3_send_signal_tp_sched+0x465/0x1000 [ 32.844301] trace_call_bpf+0x115/0x270 [ 32.844809] perf_trace_run_bpf_submit+0x4a/0xc0 [ 32.845411] perf_trace_sched_switch+0x10f/0x180 [ 32.846014] __schedule+0x45d/0x880 [ 32.846483] schedule+0x5f/0xd0 ... [ 32.853148] Chain exists of: [ 32.853148] &(&sighand->siglock)->rlock --> &p->pi_lock --> &rq->lock [ 32.853148] [ 32.854451] Possible unsafe locking scenario: [ 32.854451] [ 32.855173] CPU0 CPU1 [ 32.855745] ---- ---- [ 32.856278] lock(&rq->lock); [ 32.856671] lock(&p->pi_lock); [ 32.857332] lock(&rq->lock); [ 32.857999] lock(&(&sighand->siglock)->rlock); Deadlock happens on CPU0 when it tries to acquire &sighand->siglock but it has been held by CPU1 and CPU1 tries to grab &rq->lock and cannot get it. This is not exactly the callstack in our production environment, but sympotom is similar and both locks are using spin_lock_irqsave() to acquire the lock, and both involves rq_lock. The fix to delay sending signal when irq is disabled also fixed this issue. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200304191104.2796501-1-yhs@fb.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b88bf6c upstream. The following was observed by Kar Hin Ong with RT patchset: Backtrace: irq 19: nobody cared (try booting with the "irqpoll" option) CPU: 0 PID: 3329 Comm: irq/34-nipalk Tainted:4.14.87-rt49 #1 Hardware name: National Instruments NI PXIe-8880/NI PXIe-8880, BIOS 2.1.5f1 01/09/2020 Call Trace: <IRQ> ? dump_stack+0x46/0x5e ? __report_bad_irq+0x2e/0xb0 ? note_interrupt+0x242/0x290 ? nNIKAL100_memoryRead16+0x8/0x10 [nikal] ? handle_irq_event_percpu+0x55/0x70 ? handle_irq_event+0x4f/0x80 ? handle_fasteoi_irq+0x81/0x180 ? handle_irq+0x1c/0x30 ? do_IRQ+0x41/0xd0 ? common_interrupt+0x84/0x84 </IRQ> ... handlers: [<ffffffffb3297200>] irq_default_primary_handler threaded [<ffffffffb3669180>] usb_hcd_irq Disabling IRQ #19 The problem being that this device is triggering boot interrupts due to threaded interrupt handling and masking of the IO-APIC. These boot interrupts are then forwarded on to the legacy PCH's PIRQ lines where there is no handler present for the device. Whenever a PCI device fires interrupt (INTx) to Pin 20 of IOAPIC 2 (GSI 44), the kernel receives two interrupts: 1. Interrupt from Pin 20 of IOAPIC 2 -> Expected 2. Interrupt from Pin 19 of IOAPIC 1 -> UNEXPECTED Quirks for disabling boot interrupts (preferred) or rerouting the handler exist but do not address these Xeon chipsets' mechanism: https://lore.kernel.org/lkml/12131949181903-git-send-email-sassmann@suse.de/ Add a new mechanism via PCI CFG for those chipsets supporting CIPINTRC register's dis_intx_rout2ich bit. Link: https://lore.kernel.org/r/20200220192930.64820-2-sean.v.kelley@linux.intel.com Reported-by: Kar Hin Ong <kar.hin.ong@ni.com> Tested-by: Kar Hin Ong <kar.hin.ong@ni.com> Signed-off-by: Sean V Kelley <sean.v.kelley@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e24c644 ] I compiled with AddressSanitizer and I had these memory leaks while I was using the tep_parse_format function: Direct leak of 28 byte(s) in 4 object(s) allocated from: #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe) #1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985 #2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140 #3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206 #4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291 #5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299 #6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849 #7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161 #8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207 #9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786 #10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285 #11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369 #12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335 #13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389 #14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431 #15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251 #16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284 #17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593 #18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727 #19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048 #20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127 #21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152 #22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252 #23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347 #24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461 #25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673 #26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2) The token variable in the process_dynamic_array_len function is allocated in the read_expect_type function, but is not freed before calling the read_token function. Free the token variable before calling read_token in order to plug the leak. Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/linux-trace-devel/20200730150236.5392-1-pduplessis@efficios.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit aa4e460 upstream. Commit 4d00409 ("lockdep: Fix lockdep recursion") uncovered the following issue in lib/crc32test reported on s390: BUG: using __this_cpu_read() in preemptible [00000000] code: swapper/0/1 caller is lockdep_hardirqs_on_prepare+0x48/0x270 CPU: 6 PID: 1 Comm: swapper/0 Not tainted 5.9.0-next-20201015-15164-g03d992bd2de6 #19 Hardware name: IBM 3906 M04 704 (LPAR) Call Trace: lockdep_hardirqs_on_prepare+0x48/0x270 trace_hardirqs_on+0x9c/0x1b8 crc32_test.isra.0+0x170/0x1c0 crc32test_init+0x1c/0x40 do_one_initcall+0x40/0x130 do_initcalls+0x126/0x150 kernel_init_freeable+0x1f6/0x230 kernel_init+0x22/0x150 ret_from_fork+0x24/0x2c no locks held by swapper/0/1. Remove extra local_irq_disable/local_irq_enable helpers calls. Fixes: 5fb7f87 ("lib: add module support to crc32 tests") Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lkml.kernel.org/r/patch.git-4369da00c06e.your-ad-here.call-01602859837-ext-1679@work.hours Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6f3353c upstream. Current ebpf disassembly buffer size of 64 is too small. E.g. this line takes 65 bytes: 01fffff8005822e: ec8100ed8065\tclgrj\t%r8,%r1,8,001fffff80058408\n\0 Double the buffer size like it is done for the kernel disassembly buffer. Fixes the following KASAN finding: UG: KASAN: stack-out-of-bounds in print_fn_code+0x34c/0x380 Write of size 1 at addr 001fff800ad5f970 by task test_progs/853 CPU: 53 PID: 853 Comm: test_progs Not tainted 5.12.0-rc7-23786-g23457d86b1f0-dirty #19 Hardware name: IBM 3906 M04 704 (LPAR) Call Trace: [<0000000cd8e0538a>] show_stack+0x17a/0x1668 [<0000000cd8e2a5d8>] dump_stack+0x140/0x1b8 [<0000000cd8e16e74>] print_address_description.constprop.0+0x54/0x260 [<0000000cd75a8698>] kasan_report+0xc8/0x130 [<0000000cd6e26da4>] print_fn_code+0x34c/0x380 [<0000000cd6ea0f4e>] bpf_int_jit_compile+0xe3e/0xe58 [<0000000cd72c4c88>] bpf_prog_select_runtime+0x5b8/0x9c0 [<0000000cd72d1bf8>] bpf_prog_load+0xa78/0x19c0 [<0000000cd72d7ad6>] __do_sys_bpf.part.0+0x18e/0x768 [<0000000cd6e0f392>] do_syscall+0x12a/0x220 [<0000000cd8e333f8>] __do_syscall+0x98/0xc8 [<0000000cd8e54834>] system_call+0x6c/0x94 1 lock held by test_progs/853: #0: 0000000cd9bf7460 (report_lock){....}-{2:2}, at: kasan_report+0x96/0x130 addr 001fff800ad5f970 is located in stack of task test_progs/853 at offset 96 in frame: print_fn_code+0x0/0x380 this frame has 1 object: [32, 96) 'buffer' Memory state around the buggy address: 001fff800ad5f800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 001fff800ad5f880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >001fff800ad5f900: 00 00 f1 f1 f1 f1 00 00 00 00 00 00 00 00 f3 f3 ^ 001fff800ad5f980: f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 001fff800ad5fa00: 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 00 00 Cc: <stable@vger.kernel.org> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4d14c5c upstream Calling btrfs_qgroup_reserve_meta_prealloc from btrfs_delayed_inode_reserve_metadata can result in flushing delalloc while holding a transaction and delayed node locks. This is deadlock prone. In the past multiple commits: * ae5e070 ("btrfs: qgroup: don't try to wait flushing if we're already holding a transaction") * 6f23277 ("btrfs: qgroup: don't commit transaction when we already hold the handle") Tried to solve various aspects of this but this was always a whack-a-mole game. Unfortunately those 2 fixes don't solve a deadlock scenario involving btrfs_delayed_node::mutex. Namely, one thread can call btrfs_dirty_inode as a result of reading a file and modifying its atime: PID: 6963 TASK: ffff8c7f3f94c000 CPU: 2 COMMAND: "test" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_timeout at ffffffffa52a1bdd #3 wait_for_completion at ffffffffa529eeea <-- sleeps with delayed node mutex held #4 start_delalloc_inodes at ffffffffc0380db5 #5 btrfs_start_delalloc_snapshot at ffffffffc0393836 #6 try_flush_qgroup at ffffffffc03f04b2 #7 __btrfs_qgroup_reserve_meta at ffffffffc03f5bb6 <-- tries to reserve space and starts delalloc inodes. #8 btrfs_delayed_update_inode at ffffffffc03e31aa <-- acquires delayed node mutex #9 btrfs_update_inode at ffffffffc0385ba8 #10 btrfs_dirty_inode at ffffffffc038627b <-- TRANSACTIION OPENED #11 touch_atime at ffffffffa4cf0000 #12 generic_file_read_iter at ffffffffa4c1f123 #13 new_sync_read at ffffffffa4ccdc8a #14 vfs_read at ffffffffa4cd0849 #15 ksys_read at ffffffffa4cd0bd1 #16 do_syscall_64 at ffffffffa4a052eb #17 entry_SYSCALL_64_after_hwframe at ffffffffa540008c This will cause an asynchronous work to flush the delalloc inodes to happen which can try to acquire the same delayed_node mutex: PID: 455 TASK: ffff8c8085fa4000 CPU: 5 COMMAND: "kworker/u16:30" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_preempt_disabled at ffffffffa529e80a #3 __mutex_lock at ffffffffa529fdcb <-- goes to sleep, never wakes up. #4 btrfs_delayed_update_inode at ffffffffc03e3143 <-- tries to acquire the mutex #5 btrfs_update_inode at ffffffffc0385ba8 <-- this is the same inode that pid 6963 is holding #6 cow_file_range_inline.constprop.78 at ffffffffc0386be7 #7 cow_file_range at ffffffffc03879c1 #8 btrfs_run_delalloc_range at ffffffffc038894c #9 writepage_delalloc at ffffffffc03a3c8f #10 __extent_writepage at ffffffffc03a4c01 #11 extent_write_cache_pages at ffffffffc03a500b #12 extent_writepages at ffffffffc03a6de2 #13 do_writepages at ffffffffa4c277eb #14 __filemap_fdatawrite_range at ffffffffa4c1e5bb #15 btrfs_run_delalloc_work at ffffffffc0380987 <-- starts running delayed nodes #16 normal_work_helper at ffffffffc03b706c #17 process_one_work at ffffffffa4aba4e4 #18 worker_thread at ffffffffa4aba6fd #19 kthread at ffffffffa4ac0a3d #20 ret_from_fork at ffffffffa54001ff To fully address those cases the complete fix is to never issue any flushing while holding the transaction or the delayed node lock. This patch achieves it by calling qgroup_reserve_meta directly which will either succeed without flushing or will fail and return -EDQUOT. In the latter case that return value is going to be propagated to btrfs_dirty_inode which will fallback to start a new transaction. That's fine as the majority of time we expect the inode will have BTRFS_DELAYED_NODE_INODE_DIRTY flag set which will result in directly copying the in-memory state. Fixes: c53e965 ("btrfs: qgroup: try to flush qgroup space when we get -EDQUOT") CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 515e718 ] When fail to init coex module, free 'common' and 'adapter' directly, but common->tx_thread which will access 'common' and 'adapter' is running at the same time. That will trigger the UAF bug. ================================================================== BUG: KASAN: use-after-free in rsi_tx_scheduler_thread+0x50f/0x520 [rsi_91x] Read of size 8 at addr ffff8880076dc000 by task Tx-Thread/124777 CPU: 0 PID: 124777 Comm: Tx-Thread Not tainted 5.15.0-rc5+ #19 Call Trace: dump_stack_lvl+0xe2/0x152 print_address_description.constprop.0+0x21/0x140 ? rsi_tx_scheduler_thread+0x50f/0x520 kasan_report.cold+0x7f/0x11b ? rsi_tx_scheduler_thread+0x50f/0x520 rsi_tx_scheduler_thread+0x50f/0x520 ... Freed by task 111873: kasan_save_stack+0x1b/0x40 kasan_set_track+0x1c/0x30 kasan_set_free_info+0x20/0x30 __kasan_slab_free+0x109/0x140 kfree+0x117/0x4c0 rsi_91x_init+0x741/0x8a0 [rsi_91x] rsi_probe+0x9f/0x1750 [rsi_usb] Stop thread before free 'common' and 'adapter' to fix it. Fixes: 2108df3 ("rsi: add coex support") Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211015040335.1021546-1-william.xuanziyang@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>

…ardkernel#19)

[ Upstream commit 4224cfd ] When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed. [ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280 crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92 crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER) To prevent this scenario, we also make sure that the netdevice is present. Signed-off-by: suresh kumar <suresh2514@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 0b0747d upstream. The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230828221018.19471-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a154f5f ] The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 0b0747d upstream. The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230828221018.19471-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a154f5f ] The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e3e82fc ] When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f #3 [fffffe0000549eb8] do_nmi at ffffffff81079582 #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] #10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb #13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 #14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 #15 [ffff88aa841efb88] device_del at ffffffff82179d23 #16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] #17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] #18 [ffff88aa841efde8] process_one_work at ffffffff811c589a #19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff #20 [ffff88aa841eff10] kthread at ffffffff811d87a0 #21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/20231130081415.891006-1-lishifeng@sangfor.com.cn Suggested-by: "Ismail, Mustafa" <mustafa.ismail@intel.com> Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e8a1e58 ] mac802154_llsec_key_del() can free resources of a key directly without following the RCU rules for waiting before the end of a grace period. This may lead to use-after-free in case llsec_lookup_key() is traversing the list of keys in parallel with a key deletion: refcount_t: addition on 0; use-after-free. WARNING: CPU: 4 PID: 16000 at lib/refcount.c:25 refcount_warn_saturate+0x162/0x2a0 Modules linked in: CPU: 4 PID: 16000 Comm: wpan-ping Not tainted 6.7.0 #19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:refcount_warn_saturate+0x162/0x2a0 Call Trace: <TASK> llsec_lookup_key.isra.0+0x890/0x9e0 mac802154_llsec_encrypt+0x30c/0x9c0 ieee802154_subif_start_xmit+0x24/0x1e0 dev_hard_start_xmit+0x13e/0x690 sch_direct_xmit+0x2ae/0xbc0 __dev_queue_xmit+0x11dd/0x3c20 dgram_sendmsg+0x90b/0xd60 __sys_sendto+0x466/0x4c0 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0x45/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Also, ieee802154_llsec_key_entry structures are not freed by mac802154_llsec_key_del(): unreferenced object 0xffff8880613b6980 (size 64): comm "iwpan", pid 2176, jiffies 4294761134 (age 60.475s) hex dump (first 32 bytes): 78 0d 8f 18 80 88 ff ff 22 01 00 00 00 00 ad de x......."....... 00 00 00 00 00 00 00 00 03 00 cd ab 00 00 00 00 ................ backtrace: [<ffffffff81dcfa62>] __kmem_cache_alloc_node+0x1e2/0x2d0 [<ffffffff81c43865>] kmalloc_trace+0x25/0xc0 [<ffffffff88968b09>] mac802154_llsec_key_add+0xac9/0xcf0 [<ffffffff8896e41a>] ieee802154_add_llsec_key+0x5a/0x80 [<ffffffff8892adc6>] nl802154_add_llsec_key+0x426/0x5b0 [<ffffffff86ff293e>] genl_family_rcv_msg_doit+0x1fe/0x2f0 [<ffffffff86ff46d1>] genl_rcv_msg+0x531/0x7d0 [<ffffffff86fee7a9>] netlink_rcv_skb+0x169/0x440 [<ffffffff86ff1d88>] genl_rcv+0x28/0x40 [<ffffffff86fec15c>] netlink_unicast+0x53c/0x820 [<ffffffff86fecd8b>] netlink_sendmsg+0x93b/0xe60 [<ffffffff86b91b35>] ____sys_sendmsg+0xac5/0xca0 [<ffffffff86b9c3dd>] ___sys_sendmsg+0x11d/0x1c0 [<ffffffff86b9c65a>] __sys_sendmsg+0xfa/0x1d0 [<ffffffff88eadbf5>] do_syscall_64+0x45/0xf0 [<ffffffff890000ea>] entry_SYSCALL_64_after_hwframe+0x6e/0x76 Handle the proper resource release in the RCU callback function mac802154_llsec_key_del_rcu(). Note that if llsec_lookup_key() finds a key, it gets a refcount via llsec_key_get() and locally copies key id from key_entry (which is a list element). So it's safe to call llsec_key_put() and free the list entry after the RCU grace period elapses. Found by Linux Verification Center (linuxtesting.org). Fixes: 5d637d5 ("mac802154: add llsec structures and mutators") Cc: stable@vger.kernel.org Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Acked-by: Alexander Aring <aahringo@redhat.com> Message-ID: <20240228163840.6667-1-pchelkin@ispras.ru> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 751de20 ] For historical reasons, when bridge device is in promisc mode, packets that are directed to the taps follow bridge input hook path. This patch adds a workaround to reset conntrack for these packets. Jianbo Liu reports warning splats in their test infrastructure where cloned packets reach the br_netfilter input hook to confirm the conntrack object. Scratch one bit from BR_INPUT_SKB_CB to annotate that this packet has reached the input hook because it is passed up to the bridge device to reach the taps. [ 57.571874] WARNING: CPU: 1 PID: 0 at net/bridge/br_netfilter_hooks.c:616 br_nf_local_in+0x157/0x180 [br_netfilter] [ 57.572749] Modules linked in: xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_isc si ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5ctl mlx5_core [ 57.575158] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.8.0+ #19 [ 57.575700] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 57.576662] RIP: 0010:br_nf_local_in+0x157/0x180 [br_netfilter] [ 57.577195] Code: fe ff ff 41 bd 04 00 00 00 be 04 00 00 00 e9 4a ff ff ff be 04 00 00 00 48 89 ef e8 f3 a9 3c e1 66 83 ad b4 00 00 00 04 eb 91 <0f> 0b e9 f1 fe ff ff 0f 0b e9 df fe ff ff 48 89 df e8 b3 53 47 e1 [ 57.578722] RSP: 0018:ffff88885f845a08 EFLAGS: 00010202 [ 57.579207] RAX: 0000000000000002 RBX: ffff88812dfe8000 RCX: 0000000000000000 [ 57.579830] RDX: ffff88885f845a60 RSI: ffff8881022dc300 RDI: 0000000000000000 [ 57.580454] RBP: ffff88885f845a60 R08: 0000000000000001 R09: 0000000000000003 [ 57.581076] R10: 00000000ffff1300 R11: 0000000000000002 R12: 0000000000000000 [ 57.581695] R13: ffff8881047ffe00 R14: ffff888108dbee00 R15: ffff88814519b800 [ 57.582313] FS: 0000000000000000(0000) GS:ffff88885f840000(0000) knlGS:0000000000000000 [ 57.583040] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 57.583564] CR2: 000000c4206aa000 CR3: 0000000103847001 CR4: 0000000000370eb0 [ 57.584194] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 57.584820] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 57.585440] Call Trace: [ 57.585721] <IRQ> [ 57.585976] ? __warn+0x7d/0x130 [ 57.586323] ? br_nf_local_in+0x157/0x180 [br_netfilter] [ 57.586811] ? report_bug+0xf1/0x1c0 [ 57.587177] ? handle_bug+0x3f/0x70 [ 57.587539] ? exc_invalid_op+0x13/0x60 [ 57.587929] ? asm_exc_invalid_op+0x16/0x20 [ 57.588336] ? br_nf_local_in+0x157/0x180 [br_netfilter] [ 57.588825] nf_hook_slow+0x3d/0xd0 [ 57.589188] ? br_handle_vlan+0x4b/0x110 [ 57.589579] br_pass_frame_up+0xfc/0x150 [ 57.589970] ? br_port_flags_change+0x40/0x40 [ 57.590396] br_handle_frame_finish+0x346/0x5e0 [ 57.590837] ? ipt_do_table+0x32e/0x430 [ 57.591221] ? br_handle_local_finish+0x20/0x20 [ 57.591656] br_nf_hook_thresh+0x4b/0xf0 [br_netfilter] [ 57.592286] ? br_handle_local_finish+0x20/0x20 [ 57.592802] br_nf_pre_routing_finish+0x178/0x480 [br_netfilter] [ 57.593348] ? br_handle_local_finish+0x20/0x20 [ 57.593782] ? nf_nat_ipv4_pre_routing+0x25/0x60 [nf_nat] [ 57.594279] br_nf_pre_routing+0x24c/0x550 [br_netfilter] [ 57.594780] ? br_nf_hook_thresh+0xf0/0xf0 [br_netfilter] [ 57.595280] br_handle_frame+0x1f3/0x3d0 [ 57.595676] ? br_handle_local_finish+0x20/0x20 [ 57.596118] ? br_handle_frame_finish+0x5e0/0x5e0 [ 57.596566] __netif_receive_skb_core+0x25b/0xfc0 [ 57.597017] ? __napi_build_skb+0x37/0x40 [ 57.597418] __netif_receive_skb_list_core+0xfb/0x220 Fixes: 62e7151 ("netfilter: bridge: confirm multicast packets before passing them up the stack") Reported-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f8bbc07 ] vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <lei.chen@smartx.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 769e6a1 ] ui_browser__show() is capturing the input title that is stack allocated memory in hist_browser__run(). Avoid a use after return by strdup-ing the string. Committer notes: Further explanation from Ian Rogers: My command line using tui is: $ sudo bash -c 'rm /tmp/asan.log*; export ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a sleep 1; /tmp/perf/perf mem report' I then go to the perf annotate view and quit. This triggers the asan error (from the log file): ``` ==1254591==ERROR: AddressSanitizer: stack-use-after-return on address 0x7f2813331920 at pc 0x7f28180 65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10 READ of size 80 at 0x7f2813331920 thread T0 #0 0x7f2818065990 in __interceptor_strlen ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461 #1 0x7f2817698251 in SLsmg_write_wrapped_string (/lib/x86_64-linux-gnu/libslang.so.2+0x98251) #2 0x7f28176984b9 in SLsmg_write_nstring (/lib/x86_64-linux-gnu/libslang.so.2+0x984b9) #3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60 #4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266 #5 0x55c94045c776 in ui_browser__show ui/browser.c:288 #6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206 #7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458 #8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412 #9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527 #10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613 #11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661 #12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671 #13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141 #14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805 #15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374 #16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516 #17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350 #18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403 #19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447 #20 0x55c9400e53ad in main tools/perf/perf.c:561 #21 0x7f28170456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360 #23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId: 84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93) Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746 This frame has 1 object(s): [32, 192) 'title' (line 747) <== Memory access at offset 32 is inside this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork ``` hist_browser__run isn't on the stack so the asan error looks legit. There's no clean init/exit on struct ui_browser so I may be trading a use-after-return for a memory leak, but that seems look a good trade anyway. Fixes: 05e8b08 ("perf ui browser: Stop using 'self'") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Ben Gainey <ben.gainey@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: Li Dong <lidong@vivo.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Paran Lee <p4ranlee@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sun Haiyong <sunhaiyong@loongson.cn> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Yanteng Si <siyanteng@loongson.cn> Cc: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/20240507183545.1236093-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit be346c1 upstream. The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/20240617095543.6971-1-jack@suse.cz Link: https://lkml.kernel.org/r/20240614145243.8837-1-jack@suse.cz Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mdrjr added a commit that referenced this pull request Apr 18, 2013

Merge pull request #19 from ggezer/odroid-3.8.y

dbaf8cc

Added DVFS CPU hot-plug driver for EXYNOS4x12

mdrjr merged commit dbaf8cc into hardkernel:odroid-3.8.y Apr 18, 2013

paralin pushed a commit to paralin/linux that referenced this pull request Apr 6, 2022

nuumio: rk defconfig: Add MPT3SAS driver for LSI MPT Fusion adapters (h…

f2fe88a

…ardkernel#19)

paralin pushed a commit to paralin/linux that referenced this pull request May 8, 2022

nuumio: rk defconfig: Add MPT3SAS driver for LSI MPT Fusion adapters (h…

53b703b

…ardkernel#19)

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Added DVFS CPU hot-plug driver for EXYNOS4x12 #19

Added DVFS CPU hot-plug driver for EXYNOS4x12 #19

ggezer commented Apr 18, 2013

Added DVFS CPU hot-plug driver for EXYNOS4x12 #19

Added DVFS CPU hot-plug driver for EXYNOS4x12 #19

Conversation

ggezer commented Apr 18, 2013