feat: generic L2 forwarder base contract

contracts/chain-adapters/ForwarderBase.sol

@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: BUSL-1.1
+pragma solidity ^0.8.0;
+
+import { UUPSUpgradeable } from "@openzeppelin/contracts-upgradeable/proxy/utils/UUPSUpgradeable.sol";
+import { ForwarderInterface } from "./interfaces/ForwarderInterface.sol";
+import { AdapterInterface } from "./interfaces/AdapterInterface.sol";
+
+/**
+ * @title ForwarderBase
+ * @notice This contract expects to receive messages and tokens from an authorized sender on L1 and forwards messages and tokens to spoke pool contracts on
+ * L3. Messages are intended to originate from the hub pool. The motivating use case for this contract is to aid with sending messages from L1 to an L3, which
+ * by definition is a network which does not have a direct connection with L1 but instead must communicate with that L1 via an L2. Each contract that extends
+ * the ForwarderBase maintains a mapping of chain IDs to a bridge adapter addresses. For example, if this contract is deployed on Arbitrum, then this mapping
+ * would send L3 chain IDs which roll up to Arbitrum to an adapter contract address deployed on Arbitrum which directly interfaces with the L3 token/message
+ * bridge. In other words, this contract maintains a mapping of important contracts which helps transmit messages to the "next layer".
+ * @custom:security-contact bugs@across.to
+ */
+abstract contract ForwarderBase is UUPSUpgradeable, ForwarderInterface {
+    // Address that can relay messages using this contract and also upgrade this contract.
+    address public crossDomainAdmin;
+
+    // Map from a destination chain ID to the address of an adapter contract which interfaces with the L2-L3 bridge. The destination chain ID corresponds to
+    // the network ID of an L3. These chain IDs are used as the key in this mapping because network IDs are enforced to be unique. Since we require the chain
+    // ID to be sent along with a message or token relay, ForwarderInterface's relay functions include an extra field, `destinationChainId`, when compared to the
+    // relay functions of `AdapterInterface`.
+    mapping(uint256 => address) chainAdapters;
+
+    event ChainAdaptersUpdated(uint256 indexed destinationChainId, address l2Adapter);
+    event SetXDomainAdmin(address indexed crossDomainAdmin);
+
+    error InvalidCrossDomainAdmin();
+    error InvalidChainAdapter();
+    error RelayMessageFailed();
+    error RelayTokensFailed(address baseToken);
+    // Error which is triggered when there is no adapter set in the `chainAdapters` mapping.
+    error UninitializedChainAdapter();
+
+    /*
+     * @dev Cross domain admin permissioning is implemented specifically for each L2 that this contract is deployed on, so this base contract
+     * simply prescribes this modifier to protect external functions using that L2's specific admin permissioning logic.
+     */
+    modifier onlyAdmin() {
+        _requireAdminSender();
+        _;
+    }
+
+    /**
+     * @notice Constructs the Forwarder contract.
+     * @dev _disableInitializers() restricts anybody from initializing the implementation contract, which if not done,
+     * may disrupt the proxy if another EOA were to initialize it.
+     */
+    constructor() {
+        _disableInitializers();
+    }
+
+    /**
+     * @notice Initializes the forwarder contract.
+     * @param _crossDomainAdmin L1 address of the contract which can send root bundles/messages to this forwarder contract.
+     */
+    function __Forwarder_init(address _crossDomainAdmin) public onlyInitializing {
+        __UUPSUpgradeable_init();
+        _setCrossDomainAdmin(_crossDomainAdmin);
+    }
+
+    /**
+     * @notice Sets a new cross domain admin for this contract.
+     * @param _newCrossDomainAdmin L1 address of the new cross domain admin.
+     */
+    function setCrossDomainAdmin(address _newCrossDomainAdmin) external onlyAdmin {
+        if (_newCrossDomainAdmin == address(0)) revert InvalidCrossDomainAdmin();
+        _setCrossDomainAdmin(_newCrossDomainAdmin);
+        emit SetXDomainAdmin(_newCrossDomainAdmin);
+    }
+
+    /**
+     * @notice Maps a new destination chain ID to an adapter contract which facilitates bridging to that chain.
+     * @param _destinationChainId The chain ID of the target network.
+     * @param _l2Adapter Contract address of the adapter which interfaces with the L2-L3 bridge.
+     * @dev Actual bridging logic is delegated to the adapter contract so that the forwarder can function irrespective of the "flavor" of
+     * L3 (e.g. ArbitrumOrbit, OpStack, etc.).
+     */
+    function updateAdapter(uint256 _destinationChainId, address _l2Adapter) external onlyAdmin {
+        if (_l2Adapter == address(0)) revert InvalidChainAdapter();
+        chainAdapters[_destinationChainId] = _l2Adapter;
+        emit ChainAdaptersUpdated(_destinationChainId, _l2Adapter);
+    }
+
+    /**
+     * @notice Relays a specified message to a contract on L3. This contract assumes that `target` exists on the L3 and can properly
+     * receive the function being called.
+     * @param target The address of the spoke pool contract that will receive the input message.
+     * @param destinationChainId The chain ID of the network which contains `target`.
+     * @param message The data to execute on the target contract.
+     */
+    function relayMessage(
+        address target,
+        uint256 destinationChainId,
+        bytes memory message
+    ) external payable override onlyAdmin {
+        address adapter = chainAdapters[destinationChainId];
+        if (adapter == address(0)) revert UninitializedChainAdapter();
+
+        // The forwarder assumes that `target` exists on the following network.
+        (bool success, ) = adapter.delegatecall(abi.encodeCall(AdapterInterface.relayMessage, (target, message)));
+        if (!success) revert RelayMessageFailed();
+        emit MessageForwarded(target, destinationChainId, message);
+    }
+
+    /**
+     * @notice Relays `amount` of a token to a contract on L3. Importantly, this contract assumes that `target` exists on L3.
+     * @param baseToken This layer's address of the token to send.
+     * @param destinationChainToken The next layer's address of the token to send.
+     * @param amount The amount of the token to send.
+     * @param destinationChainId The chain ID of the network which contains `target`.
+     * @param target The address of the contract that which will *ultimately* receive the tokens. For most cases, this is the spoke pool contract on L3.
+     * @dev While `relayMessage` also assumes that `target` is correct, this function has the potential of deleting funds if `target` is incorrectly set.
+     * This should be guarded by the logic of the Hub Pool on L1, since the Hub Pool will always set `target` to the L3 spoke pool per UMIP-157.
+     */
+    function relayTokens(
+        address baseToken,
+        address destinationChainToken,
+        uint256 amount,
+        uint256 destinationChainId,
+        address target
+    ) external payable override onlyAdmin {
+        address adapter = chainAdapters[destinationChainId];
+        if (adapter == address(0)) revert UninitializedChainAdapter();
+        (bool success, ) = adapter.delegatecall(
+            abi.encodeCall(AdapterInterface.relayTokens, (baseToken, destinationChainToken, amount, target))
+        );
+        if (!success) revert RelayTokensFailed(baseToken);
+        emit TokensForwarded(baseToken, destinationChainToken, amount, destinationChainId, target);
+    }
+
+    // Function to be overridden in order to authenticate that messages sent to this contract originated
+    // from the expected account.
+    function _requireAdminSender() internal virtual;
+
+    // We also want to restrict who can upgrade this contract. The same admin that can relay messages through this
+    // contract can upgrade this contract.
+    function _authorizeUpgrade(address) internal virtual override onlyAdmin {}
+
+    function _setCrossDomainAdmin(address _newCrossDomainAdmin) internal {
+        if (_newCrossDomainAdmin == address(0)) revert InvalidCrossDomainAdmin();
+        crossDomainAdmin = _newCrossDomainAdmin;
+        emit SetXDomainAdmin(_newCrossDomainAdmin);
+    }
+
+    // Reserve storage slots for future versions of this base contract to add state variables without
+    // affecting the storage layout of child contracts. Decrement the size of __gap whenever state variables
+    // are added. This is at bottom of contract to make sure it's always at the end of storage.
+    uint256[1000] private __gap;
+}

contracts/chain-adapters/interfaces/ForwarderInterface.sol

@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: BUSL-1.1
+pragma solidity ^0.8.0;
+
+/**
+ * @notice Sends cross chain messages and tokens to contracts on a specific L3 network.
+ * This interface is implemented by forwarder contracts deployed to L2s.
+ */
+
+interface ForwarderInterface {
+    event MessageForwarded(address indexed target, uint256 indexed chainId, bytes message);
+
+    event TokensForwarded(
+        address baseToken,
+        address remoteToken,
+        uint256 amount,
+        uint256 indexed destinationChainId,
+        address indexed to
+    );
+
+    /**
+     * @notice Send message to `target` on L3.
+     * @dev This method is marked payable because relaying the message might require a fee
+     * to be paid by the sender to forward the message to L3. However, it will not send msg.value
+     * to the target contract on L3.
+     * @param target L3 address to send message to.
+     * @param destinationChainId Chain ID of the L3 network.
+     * @param message Message to send to `target`.
+     */
+    function relayMessage(
+        address target,
+        uint256 destinationChainId,
+        bytes calldata message
+    ) external payable;
+
+    /**
+     * @notice Send `amount` of `l2Token` to `to` on L3. `l3oken` is the L3 address equivalent of `l2Token`.
+     * @dev This method is marked payable because relaying the message might require a fee
+     * to be paid by the sender to forward the message to L2. However, it will not send msg.value
+     * to the target contract on L2.
+     * @param l2Token L2 token to bridge.
+     * @param l3Token L3 token to receive.
+     * @param amount Amount of `l2Token` to bridge.
+     * @param destinationChainId Chain ID of the L3 network.
+     * @param to Bridge recipient.
+     */
+    function relayTokens(
+        address l2Token,
+        address l3Token,
+        uint256 amount,
+        uint256 destinationChainId,
+        address to
+    ) external payable;
+}