Skip to content

SanjayGhanagiri/nvbench

 
 

Repository files navigation

Overview

This project is a work-in-progress. Everything is subject to change.

NVBench is a C++17 library designed to simplify CUDA kernel benchmarking. It features:

  • Parameter sweeps: a powerful and flexible "axis" system explores a kernel's configuration space. Parameters may be dynamic numbers/strings or static types.
  • Runtime customization: A rich command-line interface allows redefinition of parameter axes, CUDA device selection, locking GPU clocks (Volta+), changing output formats, and more.
  • Throughput calculations: Compute and report:
    • Item throughput (elements/second)
    • Global memory bandwidth usage (bytes/second and per-device %-of-peak-bw)
  • Multiple output formats: Currently supports markdown (default) and CSV output.
  • Manual timer mode: (optional) Explicitly start/stop timing in a benchmark implementation.
  • Multiple measurement types:
    • Cold Measurements:
      • Each sample runs the benchmark once with a clean device L2 cache.
      • GPU and CPU times are reported.
    • Batch Measurements:
      • Executes the benchmark multiple times back-to-back and records total time.
      • Reports the average execution time (total time / number of executions).

Getting Started

Minimal Benchmark

A basic kernel benchmark can be created with just a few lines of CUDA C++:

void my_benchmark(nvbench::state& state) {
  state.exec([](nvbench::launch& launch) { 
    my_kernel<<<num_blocks, 256, 0, launch.get_stream()>>>();
  });
}
NVBENCH_BENCH(my_benchmark);

See Benchmarks for information on customizing benchmarks and implementing parameter sweeps.

Command Line Interface

Each benchmark executable produced by NVBench provides a rich set of command-line options for configuring benchmark execution at runtime. See the CLI overview and CLI axis specification for more information.

Examples

This repository provides a number of examples that demonstrate various NVBench features and usecases:

Building Examples

To build the examples:

mkdir -p build
cd build
cmake -DNVBench_ENABLE_EXAMPLES=ON -DCMAKE_CUDA_ARCHITECTURES=70 .. && make

Be sure to set CMAKE_CUDA_ARCHITECTURE based on the GPU you are running on.

Examples are built by default into build/bin and are prefixed with nvbench.example.

Example output from `nvbench.example.throughput`
# Devices

## [0] `Quadro GV100`
* SM Version: 700 (PTX Version: 700)
* Number of SMs: 80
* SM Default Clock Rate: 1627 MHz
* Global Memory: 32163 MiB Free / 32508 MiB Total
* Global Memory Bus Peak: 870 GiB/sec (4096-bit DDR @850MHz)
* Max Shared Memory: 96 KiB/SM, 48 KiB/Block
* L2 Cache Size: 6144 KiB
* Maximum Active Blocks: 32/SM
* Maximum Active Threads: 2048/SM, 1024/Block
* Available Registers: 65536/SM, 65536/Block
* ECC Enabled: No

# Log

Run:  throughput_bench [Device=0]
Warn: Current measurement timed out (15.00s) while over noise threshold (1.26% > 0.50%)
Pass: Cold: 0.262392ms GPU, 0.267860ms CPU, 7.19s total GPU, 27393x
Pass: Batch: 0.261963ms GPU, 7.18s total GPU, 27394x

# Benchmark Results

## throughput_bench

### [0] Quadro GV100

| NumElements |  DataSize  | Samples |  CPU Time  | Noise |  GPU Time  | Noise | Elem/s  | GlobalMem BW  | BWPeak | Batch GPU  | Batch  |
|-------------|------------|---------|------------|-------|------------|-------|---------|---------------|--------|------------|--------|
|    16777216 | 64.000 MiB |  27393x | 267.860 us | 1.25% | 262.392 us | 1.26% | 63.940G | 476.387 GiB/s | 58.77% | 261.963 us | 27394x |

Demo Project

To get started using NVBench with your own kernels, consider trying out the NVBench Demo Project.

nvbench_demo provides a simple CMake project that uses NVBench to build an example benchmark. It's a great way to experiment with the library without a lot of investment.

Contributing

Contributions are welcome!

For current issues, see the issue board. Issues labeled with are good for first time contributors.

Tests

To build nvbench tests:

mkdir -p build
cd build
cmake -DNVBench_ENABLE_TESTING=ON .. && make

Tests are built by default into build/bin and prefixed with nvbench.test.

To run all tests:

make test

or

ctest

License

NVBench is released under the Apache 2.0 License with LLVM exceptions. See LICENSE.

Scope and Related Projects

NVBench will measure the CPU and CUDA GPU execution time of a single host-side critical region per benchmark. It is intended for regression testing and parameter tuning of individual kernels. For in-depth analysis of end-to-end performance of multiple applications, the NVIDIA Nsight tools are more appropriate.

NVBench is focused on evaluating the performance of CUDA kernels and is not optimized for CPU microbenchmarks. This may change in the future, but for now, consider using Google Benchmark for high resolution CPU benchmarks.

About

CUDA Kernel Benchmarking Library

Resources

License

Code of conduct

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Cuda 52.8%
  • C++ 39.9%
  • CMake 2.9%
  • Python 2.5%
  • Shell 1.9%