Skip to content

8.2.1
Compare
Choose a tag to compare
@github-actions github-actions released this 13 Dec 13:42
· 3 commits to stable since this release
8.2.1
9b3d7d6

20221212 8.2.1

  • Increase overcurrent timeout (EU)
  • enable HEARTBEAT_SUPERVISION, disable BTN_MENU, enable RELAY_HOLD_DELAY_TUNING
  • Disable OCPP by default for (EU)

20220124 V8.2.0 SCL

  • don't convert 0x01 in $FP strings to <SPC>, because it filters out STOP icon
    just send 0x11 as space instead. prints as <SPC> on HD44780
  • bump RAPIVER to 5.2.1
  • change index of delay timer CLOCK icon from 0 -> 6, because otherwise, it can't be displayed via $FP
  • fix bug, wasn't overriding OBD::updatesDisabled() during fault state

20220119 SCL

  • changes to facilitate PlatformIO builds
    #defines that apply to Arduino IDE builds should be kept out of the #ifndef PLATFORMIO block in open_evse.h

20220107

  • set ECF_AUTO_SVC_LEVEL_DISABLED when !AUTOSVCLEVEL

20211216 SCL V8.1.1

  • reset elapsed time when car plugged in
  • J1772EvseController::Update() - just call ReadPilot() once at the top of function previously had ReadPilot() sprinkled around to try to avoid reading when not needed to save CPU cycles -> probably not necessary

20211216 SCL V8.1.0

  • merged in mennekes branch

20211201 SCL V8.1.0a

  • added ECVF_TIMER_ON so we don't have to poll to test if delay timer is on
  • revamp MENNEKES_LOCK
    • auto mode: locked when EVSE connected, unlocked when disconnected
      • to implement this, need to get rid of states were pilot = N12, because we can't detect connection state
      • don't ever set pilot to N12, even in fault states. only set to N12 in EVSE_STATE_DISABLED
    • always automatically unlocks in EVSE_STATE_DISABLED, even if in manual mode
    • add recoverable parameter to HardFault()
    • add volatile manual mode - when enabled, Mennekes lock is under full manual control
    • add S5/G5 RAPI commands to set/fetch Mennekes settings
    • ECVF_MENNEKES_MANUAL also reflects auto/manual mode
  • RAPIVER 5.2.0
  • usurped ECVF_AMMETER_CAL with ECVF_MENNEKES_MANUAL, so the code is currently turned off

20211201 SCL V8.0.0d

  • more refinements to CGMI - POST stuck relay check

20211128 SCL V8.0.0c

  • fixed bugs in CGMI code

20211123 SCL V8.0.0a

Assets 8
Loading