using_install.sh

Using the install script

1. Log into the Pi using SSH or Wifi. See Accessing the Pi using SSH

2. Enter or copy-paste the following command:
   Remember: Commands on the Raspberry Pi are case sensitive.

   curl -sSL https://gitlab.com/seventer/sip_setup/-/raw/main/sip_setup.sh | sudo bash

   The SIP setup menu will appear

3. Optional: Use the arrow keys to move between options. Tap the space bar to select or de-select an option.

   In most cases the default options are recommended..

4. Tap the Tab key to move to <ok>.

5. Tap the Enter key then use the arrow keys to choose the location where SIP will be installed.

6. Tap the Enter key again to install SIP.

   Depending on the options selected, the install process may take a few minutes to complete.
   A dialog box will appear when SIP is installed.

7. Tap the Enter key to reboot the Pi.

   After the Pi has rebooted SIP will be up and running, ready to be connected to your irrigation / sprinkler system and programmed with your irrigation schedules. See Opening the SIP web interface to get started.

Related information
Installing Raspberry Pi OS for SIP
Accessing the Pi using SSH
Opening the SIP web interface
Home