autotest: GainBackoffTakeoff test

Tools/autotest/arducopter.py

@@ -10630,6 +10630,7 @@ def tests1c(self):
              self.SetpointBadVel,
              self.SplineTerrain,
              self.TakeoffCheck,
+             self.GainBackoffTakeoff,
         ])
         return ret
 
@@ -10769,6 +10770,126 @@ def AHRSTrimLand(self):
         self.context_pop()
         self.reboot_sitl()
 
+    def GainBackoffTakeoff(self):
+        '''test gain backoff on takeoff'''
+        self.context_push()
+        self.progress("Test gains are fully backed off")
+        self.set_parameters({
+            "ATC_LAND_R_MULT": 0.0,
+            "ATC_LAND_P_MULT": 0.0,
+            "ATC_LAND_Y_MULT": 0.0,
+            "GCS_PID_MASK" : 7,
+            "LOG_BITMASK": 180222,
+        })
+        self.reboot_sitl()
+        self.wait_ready_to_arm()
+        self.change_mode('ALT_HOLD')
+
+        class ValidatePDZero(vehicle_test_suite.TestSuite.MessageHook):
+            '''asserts correct values in PID_TUNING'''
+
+            def __init__(self, suite, axis):
+                super(ValidatePDZero, self).__init__(suite)
+                self.pid_tuning_count = 0
+                self.p_sum = 0
+                self.d_sum = 0
+                self.i_sum = 0
+                self.axis = axis
+
+            def hook_removed(self):
+                if self.pid_tuning_count == 0:
+                    raise NotAchievedException("Did not get PID_TUNING")
+                if self.i_sum == 0:
+                    raise ValueError("I sum is zero")
+                print(f"ValidatePDZero: PID_TUNING count: {self.pid_tuning_count}")
+
+            def process(self, mav, m):
+                if m.get_type() != 'PID_TUNING' or m.axis != self.axis:
+                    return
+                self.pid_tuning_count += 1
+                self.p_sum += m.P
+                self.d_sum += m.D
+                self.i_sum += m.I
+                if self.p_sum > 0:
+                    raise ValueError("P sum is not zero")
+                if self.d_sum > 0:
+                    raise ValueError("D sum is not zero")
+
+        self.progress("Check that PD values are zero")
+        self.install_message_hook_context(ValidatePDZero(self, mavutil.mavlink.PID_TUNING_ROLL))
+        self.install_message_hook_context(ValidatePDZero(self, mavutil.mavlink.PID_TUNING_PITCH))
+        self.install_message_hook_context(ValidatePDZero(self, mavutil.mavlink.PID_TUNING_YAW))
+        # until the context pop happens, all received PID_TUNINGS will be verified as good
+        self.arm_vehicle()
+        self.set_rc(3, 1500)
+        self.delay_sim_time(2)
+        self.set_rc(2, 1250)
+        self.delay_sim_time(5)
+        self.assert_receive_message('PID_TUNING', timeout=5)
+        self.set_rc_default()
+        self.zero_throttle()
+        self.disarm_vehicle()
+        self.context_pop()
+
+        self.context_push()
+        self.progress("Test gains are not backed off")
+        self.set_parameters({
+            "ATC_LAND_R_MULT": 1.0,
+            "ATC_LAND_P_MULT": 1.0,
+            "ATC_LAND_Y_MULT": 1.0,
+            "GCS_PID_MASK" : 7,
+            "LOG_BITMASK": 180222,
+        })
+        self.reboot_sitl()
+        self.wait_ready_to_arm()
+        self.change_mode('ALT_HOLD')
+
+        class ValidatePDNonZero(vehicle_test_suite.TestSuite.MessageHook):
+            '''asserts correct values in PID_TUNING'''
+
+            def __init__(self, suite, axis):
+                super(ValidatePDNonZero, self).__init__(suite)
+                self.pid_tuning_count = 0
+                self.p_sum = 0
+                self.d_sum = 0
+                self.i_sum = 0
+                self.axis = axis
+
+            def hook_removed(self):
+                if self.pid_tuning_count == 0:
+                    raise NotAchievedException("Did not get PID_TUNING")
+                if self.p_sum == 0:
+                    raise ValueError("P sum is zero")
+                if self.i_sum == 0:
+                    raise ValueError("I sum is zero")
+                print(f"ValidatePDNonZero: PID_TUNING count: {self.pid_tuning_count}")
+
+            def process(self, mav, m):
+                if m.get_type() != 'PID_TUNING' or m.axis != self.axis:
+                    return
+                self.pid_tuning_count += 1
+                self.p_sum += m.P
+                self.d_sum += m.D
+                self.i_sum += m.I
+
+        self.progress("Check that PD values are non-zero")
+        self.install_message_hook_context(ValidatePDNonZero(self, mavutil.mavlink.PID_TUNING_ROLL))
+        self.install_message_hook_context(ValidatePDNonZero(self, mavutil.mavlink.PID_TUNING_PITCH))
+        self.install_message_hook_context(ValidatePDNonZero(self, mavutil.mavlink.PID_TUNING_YAW))
+        # until the context pop happens, all received PID_TUNINGS will be verified as good
+        self.arm_vehicle()
+        self.set_rc(3, 1500)
+        self.delay_sim_time(2)
+        self.set_rc(2, 1250)
+        self.delay_sim_time(5)
+        self.assert_receive_message('PID_TUNING', timeout=5)
+        self.set_rc_default()
+        self.zero_throttle()
+        self.disarm_vehicle()
+
+        self.context_pop()
+        self.reboot_sitl()
+
     def turn_safety_x(self, value):
         self.mav.mav.set_mode_send(
             self.mav.target_system,