英文 | 中文

rl-deploy-with-python

1. Running the Simulation

• Open a Bash terminal.

• Clone the MuJoCo simulator code:

  git clone --recurse https://github.com/limxdynamics/pointfoot-mujoco-sim.git

• Install the motion control development library (if not already installed):

  • For Linux x86_64 environment:

    pip install pointfoot-mujoco-sim/limxsdk-lowlevel/python3/amd64/limxsdk-*-py3-none-any.whl

  • For Linux aarch64 environment:

    pip install pointfoot-mujoco-sim/limxsdk-lowlevel/python3/aarch64/limxsdk-*-py3-none-any.whl

• Set the robot type:

  • List the available robot types using the Shell command:

    tree -L 1 pointfoot-mujoco-sim/robot-description/pointfoot

    Example output:

    pointfoot-mujoco-sim/robot-description/pointfoot
    ├── PF_P441A
    ├── PF_P441B
    ├── PF_P441C
    └── PF_P441C2
    

  • Set the robot model type (using PF_P441C as an example; replace with your actual robot type):

    echo 'export ROBOT_TYPE=PF_P441C' >> ~/.bashrc && source ~/.bashrc

• Run the MuJoCo simulator:

  python pointfoot-mujoco-sim/simulator.py

2. Running the Control Algorithm

• Open a Bash terminal.

• Clone the control algorithm code:

  git clone --recurse https://github.com/limxdynamics/rl-deploy-with-python.git

• Install the motion control development library (if not already installed):

  • For Linux x86_64 environment:

    pip install rl-deploy-with-python/limxsdk-lowlevel/python3/amd64/limxsdk-*-py3-none-any.whl

  • For Linux aarch64 environment:

    pip install rl-deploy-with-python/limxsdk-lowlevel/python3/aarch64/limxsdk-*-py3-none-any.whl

• Set the robot type:

  • List the available robot types using the Shell command:

    tree -L 1 rl-deploy-with-python/controllers/model

    Example output:

    rl-deploy-with-python/controllers/model
    ├── PF_P441A
    ├── PF_P441B
    ├── PF_P441C
    ├── PF_P441C2
    ├── PF_TRON1A
    ├── SF_TRON1A
    └── WF_TRON1A
    

  • Set the robot model type (using PF_P441C as an example; replace with your actual robot type):

    echo 'export ROBOT_TYPE=PF_P441C' >> ~/.bashrc && source ~/.bashrc

• Run the control algorithm:

  python rl-deploy-with-python/main.py

3. Virtual Joystick

• Open a Bash terminal.

• Run the robot-joystick:

  ./pointfoot-mujoco-sim/robot-joystick/robot-joystick

4. Demonstration of Results