Skip to content

Commit

Permalink
mlxbf_gige: add MDIO support for BlueField-3
Browse files Browse the repository at this point in the history
This patch adds initial MDIO support for the BlueField-3
SoC. Separate header files for the BlueField-2 and the
BlueField-3 SoCs have been created.  These header files
hold the SoC-specific MDIO macros since the register
offsets and bit fields have changed.  Also, in BlueField-3
there is a separate register for writing and reading the
MDIO data.  Finally, instead of having "if" statements
everywhere to differentiate between SoC-specific logic,
a mlxbf_gige_mdio_gw_t struct was created for this purpose.

Signed-off-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
  • Loading branch information
dthompso authored and kuba-moo committed Jan 14, 2023
1 parent e2a9575 commit 2321d69
Show file tree
Hide file tree
Showing 6 changed files with 251 additions and 50 deletions.
19 changes: 19 additions & 0 deletions drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige.h
Original file line number Diff line number Diff line change
Expand Up @@ -67,6 +67,23 @@ struct mlxbf_gige_stats {
u64 rx_filter_discard_pkts;
};

struct mlxbf_gige_reg_param {
u32 mask;
u32 shift;
};

struct mlxbf_gige_mdio_gw {
u32 gw_address;
u32 read_data_address;
struct mlxbf_gige_reg_param busy;
struct mlxbf_gige_reg_param write_data;
struct mlxbf_gige_reg_param read_data;
struct mlxbf_gige_reg_param devad;
struct mlxbf_gige_reg_param partad;
struct mlxbf_gige_reg_param opcode;
struct mlxbf_gige_reg_param st1;
};

struct mlxbf_gige {
void __iomem *base;
void __iomem *llu_base;
Expand Down Expand Up @@ -102,6 +119,8 @@ struct mlxbf_gige {
u8 valid_polarity;
struct napi_struct napi;
struct mlxbf_gige_stats stats;
u8 hw_version;
struct mlxbf_gige_mdio_gw *mdio_gw;
};

/* Rx Work Queue Element definitions */
Expand Down
2 changes: 2 additions & 0 deletions drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c
Original file line number Diff line number Diff line change
Expand Up @@ -315,6 +315,8 @@ static int mlxbf_gige_probe(struct platform_device *pdev)

spin_lock_init(&priv->lock);

priv->hw_version = readq(base + MLXBF_GIGE_VERSION);

/* Attach MDIO device */
err = mlxbf_gige_mdio_probe(pdev, priv);
if (err)
Expand Down
172 changes: 122 additions & 50 deletions drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_mdio.c
Original file line number Diff line number Diff line change
Expand Up @@ -23,9 +23,75 @@

#include "mlxbf_gige.h"
#include "mlxbf_gige_regs.h"
#include "mlxbf_gige_mdio_bf2.h"
#include "mlxbf_gige_mdio_bf3.h"

#define MLXBF_GIGE_MDIO_GW_OFFSET 0x0
#define MLXBF_GIGE_MDIO_CFG_OFFSET 0x4
static struct mlxbf_gige_mdio_gw mlxbf_gige_mdio_gw_t[] = {
[MLXBF_GIGE_VERSION_BF2] = {
.gw_address = MLXBF2_GIGE_MDIO_GW_OFFSET,
.read_data_address = MLXBF2_GIGE_MDIO_GW_OFFSET,
.busy = {
.mask = MLXBF2_GIGE_MDIO_GW_BUSY_MASK,
.shift = MLXBF2_GIGE_MDIO_GW_BUSY_SHIFT,
},
.read_data = {
.mask = MLXBF2_GIGE_MDIO_GW_AD_MASK,
.shift = MLXBF2_GIGE_MDIO_GW_AD_SHIFT,
},
.write_data = {
.mask = MLXBF2_GIGE_MDIO_GW_AD_MASK,
.shift = MLXBF2_GIGE_MDIO_GW_AD_SHIFT,
},
.devad = {
.mask = MLXBF2_GIGE_MDIO_GW_DEVAD_MASK,
.shift = MLXBF2_GIGE_MDIO_GW_DEVAD_SHIFT,
},
.partad = {
.mask = MLXBF2_GIGE_MDIO_GW_PARTAD_MASK,
.shift = MLXBF2_GIGE_MDIO_GW_PARTAD_SHIFT,
},
.opcode = {
.mask = MLXBF2_GIGE_MDIO_GW_OPCODE_MASK,
.shift = MLXBF2_GIGE_MDIO_GW_OPCODE_SHIFT,
},
.st1 = {
.mask = MLXBF2_GIGE_MDIO_GW_ST1_MASK,
.shift = MLXBF2_GIGE_MDIO_GW_ST1_SHIFT,
},
},
[MLXBF_GIGE_VERSION_BF3] = {
.gw_address = MLXBF3_GIGE_MDIO_GW_OFFSET,
.read_data_address = MLXBF3_GIGE_MDIO_DATA_READ,
.busy = {
.mask = MLXBF3_GIGE_MDIO_GW_BUSY_MASK,
.shift = MLXBF3_GIGE_MDIO_GW_BUSY_SHIFT,
},
.read_data = {
.mask = MLXBF3_GIGE_MDIO_GW_DATA_READ_MASK,
.shift = MLXBF3_GIGE_MDIO_GW_DATA_READ_SHIFT,
},
.write_data = {
.mask = MLXBF3_GIGE_MDIO_GW_DATA_MASK,
.shift = MLXBF3_GIGE_MDIO_GW_DATA_SHIFT,
},
.devad = {
.mask = MLXBF3_GIGE_MDIO_GW_DEVAD_MASK,
.shift = MLXBF3_GIGE_MDIO_GW_DEVAD_SHIFT,
},
.partad = {
.mask = MLXBF3_GIGE_MDIO_GW_PARTAD_MASK,
.shift = MLXBF3_GIGE_MDIO_GW_PARTAD_SHIFT,
},
.opcode = {
.mask = MLXBF3_GIGE_MDIO_GW_OPCODE_MASK,
.shift = MLXBF3_GIGE_MDIO_GW_OPCODE_SHIFT,
},
.st1 = {
.mask = MLXBF3_GIGE_MDIO_GW_ST1_MASK,
.shift = MLXBF3_GIGE_MDIO_GW_ST1_SHIFT,
},
},
};

#define MLXBF_GIGE_MDIO_FREQ_REFERENCE 156250000ULL
#define MLXBF_GIGE_MDIO_COREPLL_CONST 16384ULL
Expand All @@ -47,37 +113,22 @@
/* Busy bit is set by software and cleared by hardware */
#define MLXBF_GIGE_MDIO_SET_BUSY 0x1

/* MDIO GW register bits */
#define MLXBF_GIGE_MDIO_GW_AD_MASK GENMASK(15, 0)
#define MLXBF_GIGE_MDIO_GW_DEVAD_MASK GENMASK(20, 16)
#define MLXBF_GIGE_MDIO_GW_PARTAD_MASK GENMASK(25, 21)
#define MLXBF_GIGE_MDIO_GW_OPCODE_MASK GENMASK(27, 26)
#define MLXBF_GIGE_MDIO_GW_ST1_MASK GENMASK(28, 28)
#define MLXBF_GIGE_MDIO_GW_BUSY_MASK GENMASK(30, 30)

/* MDIO config register bits */
#define MLXBF_GIGE_MDIO_CFG_MDIO_MODE_MASK GENMASK(1, 0)
#define MLXBF_GIGE_MDIO_CFG_MDIO3_3_MASK GENMASK(2, 2)
#define MLXBF_GIGE_MDIO_CFG_MDIO_FULL_DRIVE_MASK GENMASK(4, 4)
#define MLXBF_GIGE_MDIO_CFG_MDC_PERIOD_MASK GENMASK(15, 8)
#define MLXBF_GIGE_MDIO_CFG_MDIO_IN_SAMP_MASK GENMASK(23, 16)
#define MLXBF_GIGE_MDIO_CFG_MDIO_OUT_SAMP_MASK GENMASK(31, 24)

#define MLXBF_GIGE_MDIO_CFG_VAL (FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDIO_MODE_MASK, 1) | \
FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDIO3_3_MASK, 1) | \
FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDIO_FULL_DRIVE_MASK, 1) | \
FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDIO_IN_SAMP_MASK, 6) | \
FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDIO_OUT_SAMP_MASK, 13))

#define MLXBF_GIGE_BF2_COREPLL_ADDR 0x02800c30
#define MLXBF_GIGE_BF2_COREPLL_SIZE 0x0000000c
#define MLXBF_GIGE_BF3_COREPLL_ADDR 0x13409824
#define MLXBF_GIGE_BF3_COREPLL_SIZE 0x00000010

static struct resource corepll_params[] = {
[MLXBF_GIGE_VERSION_BF2] = {
.start = MLXBF_GIGE_BF2_COREPLL_ADDR,
.end = MLXBF_GIGE_BF2_COREPLL_ADDR + MLXBF_GIGE_BF2_COREPLL_SIZE - 1,
.name = "COREPLL_RES"
},
[MLXBF_GIGE_VERSION_BF3] = {
.start = MLXBF_GIGE_BF3_COREPLL_ADDR,
.end = MLXBF_GIGE_BF3_COREPLL_ADDR + MLXBF_GIGE_BF3_COREPLL_SIZE - 1,
.name = "COREPLL_RES"
}
};

/* Returns core clock i1clk in Hz */
Expand Down Expand Up @@ -134,19 +185,23 @@ static u8 mdio_period_map(struct mlxbf_gige *priv)
return mdio_period;
}

static u32 mlxbf_gige_mdio_create_cmd(u16 data, int phy_add,
static u32 mlxbf_gige_mdio_create_cmd(struct mlxbf_gige_mdio_gw *mdio_gw, u16 data, int phy_add,
int phy_reg, u32 opcode)
{
u32 gw_reg = 0;

gw_reg |= FIELD_PREP(MLXBF_GIGE_MDIO_GW_AD_MASK, data);
gw_reg |= FIELD_PREP(MLXBF_GIGE_MDIO_GW_DEVAD_MASK, phy_reg);
gw_reg |= FIELD_PREP(MLXBF_GIGE_MDIO_GW_PARTAD_MASK, phy_add);
gw_reg |= FIELD_PREP(MLXBF_GIGE_MDIO_GW_OPCODE_MASK, opcode);
gw_reg |= FIELD_PREP(MLXBF_GIGE_MDIO_GW_ST1_MASK,
MLXBF_GIGE_MDIO_CL22_ST1);
gw_reg |= FIELD_PREP(MLXBF_GIGE_MDIO_GW_BUSY_MASK,
MLXBF_GIGE_MDIO_SET_BUSY);
gw_reg |= ((data << mdio_gw->write_data.shift) &
mdio_gw->write_data.mask);
gw_reg |= ((phy_reg << mdio_gw->devad.shift) &
mdio_gw->devad.mask);
gw_reg |= ((phy_add << mdio_gw->partad.shift) &
mdio_gw->partad.mask);
gw_reg |= ((opcode << mdio_gw->opcode.shift) &
mdio_gw->opcode.mask);
gw_reg |= ((MLXBF_GIGE_MDIO_CL22_ST1 << mdio_gw->st1.shift) &
mdio_gw->st1.mask);
gw_reg |= ((MLXBF_GIGE_MDIO_SET_BUSY << mdio_gw->busy.shift) &
mdio_gw->busy.mask);

return gw_reg;
}
Expand All @@ -162,25 +217,26 @@ static int mlxbf_gige_mdio_read(struct mii_bus *bus, int phy_add, int phy_reg)
return -EOPNOTSUPP;

/* Send mdio read request */
cmd = mlxbf_gige_mdio_create_cmd(0, phy_add, phy_reg, MLXBF_GIGE_MDIO_CL22_READ);
cmd = mlxbf_gige_mdio_create_cmd(priv->mdio_gw, 0, phy_add, phy_reg,
MLXBF_GIGE_MDIO_CL22_READ);

writel(cmd, priv->mdio_io + MLXBF_GIGE_MDIO_GW_OFFSET);
writel(cmd, priv->mdio_io + priv->mdio_gw->gw_address);

ret = readl_poll_timeout_atomic(priv->mdio_io + MLXBF_GIGE_MDIO_GW_OFFSET,
val, !(val & MLXBF_GIGE_MDIO_GW_BUSY_MASK),
ret = readl_poll_timeout_atomic(priv->mdio_io + priv->mdio_gw->gw_address,
val, !(val & priv->mdio_gw->busy.mask),
5, 1000000);

if (ret) {
writel(0, priv->mdio_io + MLXBF_GIGE_MDIO_GW_OFFSET);
writel(0, priv->mdio_io + priv->mdio_gw->gw_address);
return ret;
}

ret = readl(priv->mdio_io + MLXBF_GIGE_MDIO_GW_OFFSET);
ret = readl(priv->mdio_io + priv->mdio_gw->read_data_address);
/* Only return ad bits of the gw register */
ret &= MLXBF_GIGE_MDIO_GW_AD_MASK;
ret &= priv->mdio_gw->read_data.mask;

/* The MDIO lock is set on read. To release it, clear gw register */
writel(0, priv->mdio_io + MLXBF_GIGE_MDIO_GW_OFFSET);
writel(0, priv->mdio_io + priv->mdio_gw->gw_address);

return ret;
}
Expand All @@ -197,17 +253,17 @@ static int mlxbf_gige_mdio_write(struct mii_bus *bus, int phy_add,
return -EOPNOTSUPP;

/* Send mdio write request */
cmd = mlxbf_gige_mdio_create_cmd(val, phy_add, phy_reg,
cmd = mlxbf_gige_mdio_create_cmd(priv->mdio_gw, val, phy_add, phy_reg,
MLXBF_GIGE_MDIO_CL22_WRITE);
writel(cmd, priv->mdio_io + MLXBF_GIGE_MDIO_GW_OFFSET);
writel(cmd, priv->mdio_io + priv->mdio_gw->gw_address);

/* If the poll timed out, drop the request */
ret = readl_poll_timeout_atomic(priv->mdio_io + MLXBF_GIGE_MDIO_GW_OFFSET,
temp, !(temp & MLXBF_GIGE_MDIO_GW_BUSY_MASK),
ret = readl_poll_timeout_atomic(priv->mdio_io + priv->mdio_gw->gw_address,
temp, !(temp & priv->mdio_gw->busy.mask),
5, 1000000);

/* The MDIO lock is set on read. To release it, clear gw register */
writel(0, priv->mdio_io + MLXBF_GIGE_MDIO_GW_OFFSET);
writel(0, priv->mdio_io + priv->mdio_gw->gw_address);

return ret;
}
Expand All @@ -219,9 +275,20 @@ static void mlxbf_gige_mdio_cfg(struct mlxbf_gige *priv)

mdio_period = mdio_period_map(priv);

val = MLXBF_GIGE_MDIO_CFG_VAL;
val |= FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDC_PERIOD_MASK, mdio_period);
writel(val, priv->mdio_io + MLXBF_GIGE_MDIO_CFG_OFFSET);
if (priv->hw_version == MLXBF_GIGE_VERSION_BF2) {
val = MLXBF2_GIGE_MDIO_CFG_VAL;
val |= FIELD_PREP(MLXBF2_GIGE_MDIO_CFG_MDC_PERIOD_MASK, mdio_period);
writel(val, priv->mdio_io + MLXBF2_GIGE_MDIO_CFG_OFFSET);
} else {
val = FIELD_PREP(MLXBF3_GIGE_MDIO_CFG_MDIO_MODE_MASK, 1) |
FIELD_PREP(MLXBF3_GIGE_MDIO_CFG_MDIO_FULL_DRIVE_MASK, 1);
writel(val, priv->mdio_io + MLXBF3_GIGE_MDIO_CFG_REG0);
val = FIELD_PREP(MLXBF3_GIGE_MDIO_CFG_MDC_PERIOD_MASK, mdio_period);
writel(val, priv->mdio_io + MLXBF3_GIGE_MDIO_CFG_REG1);
val = FIELD_PREP(MLXBF3_GIGE_MDIO_CFG_MDIO_IN_SAMP_MASK, 6) |
FIELD_PREP(MLXBF3_GIGE_MDIO_CFG_MDIO_OUT_SAMP_MASK, 13);
writel(val, priv->mdio_io + MLXBF3_GIGE_MDIO_CFG_REG2);
}
}

int mlxbf_gige_mdio_probe(struct platform_device *pdev, struct mlxbf_gige *priv)
Expand All @@ -230,6 +297,9 @@ int mlxbf_gige_mdio_probe(struct platform_device *pdev, struct mlxbf_gige *priv)
struct resource *res;
int ret;

if (priv->hw_version > MLXBF_GIGE_VERSION_BF3)
return -ENODEV;

priv->mdio_io = devm_platform_ioremap_resource(pdev, MLXBF_GIGE_RES_MDIO9);
if (IS_ERR(priv->mdio_io))
return PTR_ERR(priv->mdio_io);
Expand All @@ -242,13 +312,15 @@ int mlxbf_gige_mdio_probe(struct platform_device *pdev, struct mlxbf_gige *priv)
/* For backward compatibility with older ACPI tables, also keep
* CLK resource internal to the driver.
*/
res = &corepll_params[MLXBF_GIGE_VERSION_BF2];
res = &corepll_params[priv->hw_version];
}

priv->clk_io = devm_ioremap(dev, res->start, resource_size(res));
if (!priv->clk_io)
return -ENOMEM;

priv->mdio_gw = &mlxbf_gige_mdio_gw_t[priv->hw_version];

mlxbf_gige_mdio_cfg(priv);

priv->mdiobus = devm_mdiobus_alloc(dev);
Expand Down
53 changes: 53 additions & 0 deletions drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_mdio_bf2.h
Original file line number Diff line number Diff line change
@@ -0,0 +1,53 @@
/* SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause */

/* MDIO support for Mellanox Gigabit Ethernet driver
*
* Copyright (c) 2022 NVIDIA CORPORATION & AFFILIATES, ALL RIGHTS RESERVED.
*
* This software product is a proprietary product of NVIDIA CORPORATION &
* AFFILIATES (the "Company") and all right, title, and interest in and to the
* software product, including all associated intellectual property rights, are
* and shall remain exclusively with the Company.
*
* This software product is governed by the End User License Agreement
* provided with the software product.
*/

#ifndef __MLXBF_GIGE_MDIO_BF2_H__
#define __MLXBF_GIGE_MDIO_BF2_H__

#include <linux/bitfield.h>

#define MLXBF2_GIGE_MDIO_GW_OFFSET 0x0
#define MLXBF2_GIGE_MDIO_CFG_OFFSET 0x4

/* MDIO GW register bits */
#define MLXBF2_GIGE_MDIO_GW_AD_MASK GENMASK(15, 0)
#define MLXBF2_GIGE_MDIO_GW_DEVAD_MASK GENMASK(20, 16)
#define MLXBF2_GIGE_MDIO_GW_PARTAD_MASK GENMASK(25, 21)
#define MLXBF2_GIGE_MDIO_GW_OPCODE_MASK GENMASK(27, 26)
#define MLXBF2_GIGE_MDIO_GW_ST1_MASK GENMASK(28, 28)
#define MLXBF2_GIGE_MDIO_GW_BUSY_MASK GENMASK(30, 30)

#define MLXBF2_GIGE_MDIO_GW_AD_SHIFT 0
#define MLXBF2_GIGE_MDIO_GW_DEVAD_SHIFT 16
#define MLXBF2_GIGE_MDIO_GW_PARTAD_SHIFT 21
#define MLXBF2_GIGE_MDIO_GW_OPCODE_SHIFT 26
#define MLXBF2_GIGE_MDIO_GW_ST1_SHIFT 28
#define MLXBF2_GIGE_MDIO_GW_BUSY_SHIFT 30

/* MDIO config register bits */
#define MLXBF2_GIGE_MDIO_CFG_MDIO_MODE_MASK GENMASK(1, 0)
#define MLXBF2_GIGE_MDIO_CFG_MDIO3_3_MASK GENMASK(2, 2)
#define MLXBF2_GIGE_MDIO_CFG_MDIO_FULL_DRIVE_MASK GENMASK(4, 4)
#define MLXBF2_GIGE_MDIO_CFG_MDC_PERIOD_MASK GENMASK(15, 8)
#define MLXBF2_GIGE_MDIO_CFG_MDIO_IN_SAMP_MASK GENMASK(23, 16)
#define MLXBF2_GIGE_MDIO_CFG_MDIO_OUT_SAMP_MASK GENMASK(31, 24)

#define MLXBF2_GIGE_MDIO_CFG_VAL (FIELD_PREP(MLXBF2_GIGE_MDIO_CFG_MDIO_MODE_MASK, 1) | \
FIELD_PREP(MLXBF2_GIGE_MDIO_CFG_MDIO3_3_MASK, 1) | \
FIELD_PREP(MLXBF2_GIGE_MDIO_CFG_MDIO_FULL_DRIVE_MASK, 1) | \
FIELD_PREP(MLXBF2_GIGE_MDIO_CFG_MDIO_IN_SAMP_MASK, 6) | \
FIELD_PREP(MLXBF2_GIGE_MDIO_CFG_MDIO_OUT_SAMP_MASK, 13))

#endif /* __MLXBF_GIGE_MDIO_BF2_H__ */
Loading

0 comments on commit 2321d69

Please sign in to comment.