cmake-config

#! /usr/bin/env bash

# Text color variables
if [[ $TERM != *"xterm"* ]]; then
    export TERM=dumb
fi
txtred=$(tput setaf 1)    # Red
txtgrn=$(tput setaf 2)    # Green
txtylw=$(tput setaf 3)    # Yellow
#txtblu=$(tput setaf 4)    # Blue
#txtpur=$(tput setaf 5)    # Purple
txtcyn=$(tput setaf 6)    # Cyan
#txtwht=$(tput setaf 7)    # White
txtrst=$(tput sgr0)       # Text reset

if [ "${TRAVIS}" == "true" ]
then
  BUILDDIR=${1:-build}
  mkdir $BUILDDIR && cd $BUILDDIR
else
  EXTRA_ARGS=$@
fi

### The following assumes you are building in a subdirectory of ACCESS Root
### If not, then define "ACCESS" to point to the root of the SEACAS source code.
if [ "$ACCESS" == "" ]
then
    ACCESS=$(cd ..; pwd)
fi

### The SEACAS code will install in ${INSTALL_PATH}/bin, ${INSTALL_PATH}/lib, and ${INSTALL_PATH}/include.
INSTALL_PATH=${INSTALL_PATH:-${ACCESS}}

function check_valid()
{
    if [ "${!1}" == "YES" ] || [ "${!1}" == "ON" ] || [ "${!1}" == "yes" ] || [ "${!1}" == "on" ]; then
        echo "YES"
        return 0
    fi
    if [ "${!1}" == "NO" ] || [ "${!1}" == "OFF" ] || [ "${!1}" == "no" ] || [ "${!1}" == "off" ]; then
        echo "NO"
        return 0
    fi
    printf "\n${txtred}ERROR: Invalid value for $1 (${!1}) -- Must be ON, YES, NO, or OFF\n\n${txtrst}" >& 2
    exit 1
}
### Possible subset of what is built ---
APPLICATIONS=${APPLICATIONS:-YES}
APPLICATIONS=$(check_valid APPLICATIONS) || exit

LEGACY=${LEGACY:-YES}
LEGACY=$(check_valid LEGACY) || exit

FORTRAN=${FORTRAN:-YES}
FORTRAN=$(check_valid FORTRAN) || exit

ZOLTAN=${ZOLTAN:-YES}
ZOLTAN=$(check_valid ZOLTAN) || exit

### TPLs --
### Make sure these point to the locations to find the libraries and includes in lib and include
### subdirectories of the specified paths.
### For example, netcdf.h should be in ${NETCDF_PATH}/include
NETCDF_PATH=${NETCDF_PATH:-${INSTALL_PATH}}
PNETCDF_PATH=${PNETCDF_PATH:-${INSTALL_PATH}}
MATIO_PATH=${MATIO_PATH:-${INSTALL_PATH}}
HDF5_PATH=${HDF5_PATH:-${INSTALL_PATH}}
CGNS_PATH=${CGNS_PATH:-${INSTALL_PATH}}
FAODEL_PATH=${FAODEL_PATH:-${INSTALL_PATH}}
ADIOS2_PATH=${ADIOS2_PATH:-${INSTALL_PATH}}
CATALYST2_PATH=${CATALYST2_PATH:-${INSTALL_PATH}}
GTEST_PATH=${GTEST_PATH:-${INSTALL_PATH}}
CATCH2_PATH=${CATCH2_PATH:-${INSTALL_PATH}}
KOKKOS_PATH=${KOKKOS_PATH:-${INSTALL_PATH}}
METIS_PATH=${METIS_PATH:-${INSTALL_PATH}}
PARMETIS_PATH=${PARMETIS_PATH:-${INSTALL_PATH}}
FMT_PATH=${FMT_PATH:-${INSTALL_PATH}}

### Set to ON for parallel compile; otherwise OFF for serial (default)
if [ "${MPI}" = "" ]
then
    if [[ -f "$NETCDF_PATH/bin/nc-config" ]]; then
	netcdf_parallel=$($NETCDF_PATH/bin/nc-config --has-parallel)
	if [ "${netcdf_parallel}" == "yes" ]
	then
	    MPI=YES
	else
	    MPI=NO
	fi
    else
	echo "Unable to determine whether netCDF is parallel or serial.  Assuming serial"
	echo "Set either \"NETCDF_PATH\" or \"MPI\" manually if the assumption is incorrect."
	MPI=NO
    fi
fi

MPI=$(check_valid MPI) || exit
echo "${txtgrn}MPI set to ${MPI}${txtrst}"

if [ "${MPI}" == "NO" ]
then
  ### Change this to point to the compilers you want to use
    ## Travis build (and others) set this to EXTERNAL to set
    ## CXX, CC, and FC externally.
  COMPILER=${COMPILER:-gnu}

  if [ "$COMPILER" == "gnu" ]
  then
      CXX=g++
      CC=gcc
      FC=gfortran
      CFLAGS="-Wall -Wunused -pedantic -Wshadow -std=c11"
      CXXFLAGS="-Wall -Wextra  -Wunused -pedantic -Wshadow"
  fi

  if [ "$COMPILER" == "gnubrew" ]
  then
      VER=${VER:-10}
      CXX=g++-${VER}
      CC=gcc-${VER}
      FC=gfortran-${VER}
      CFLAGS="-Wall -Wunused -pedantic -Wshadow -std=c11"
      CXXFLAGS="-Wall -Wextra  -Wunused -pedantic -Wshadow"
  fi

  if [ "$COMPILER" == "gnumacport" ]
  then
      VER=${VER:-10}
      CXX=g++-mp-${VER}
      CC=gcc-mp-${VER}
      FC=gfortran-mp-${VER}
      CFLAGS="-Wall -Wunused -pedantic -Wshadow -std=c11"
      CXXFLAGS="-Wall -Wextra  -Wunused -pedantic -Wshadow"
  fi

  if [ "$COMPILER" == "clangmacport" ]
  then
      VER=${VER:-9}
      CXX=clang++-mp-${VER}.0
      CC=clang-mp-${VER}.0
      FC=gfortran
      CFLAGS="-Wall -Wunused -pedantic -Wshadow -std=c11"
      CXXFLAGS="-Wall -Wextra  -Wunused -pedantic -Wshadow"
  fi

  if [ "$COMPILER" == "nvidia" ]
  then
      CXX="nvcc -x c++"
      CC=nvcc
      FC=gfortran
  fi

  if [ "$COMPILER" == "clang" ]
  then
      CXX=clang++
      CC=clang
      FC=${FC:-gfortran}
      CFLAGS="-Wall -Wunused -pedantic -Wshadow"
      CXXFLAGS="-Wall -Wextra  -Wunused -pedantic -Wshadow"
  fi

  if [ "$COMPILER" == "intel" ]
  then
      CXX=icpx
      CC=icx
      FC=ifx
      CFLAGS="-Wall -Wunused"
      CXXFLAGS="-Wall -Wextra  -Wunused -DFMT_HEADER_ONLY"
  fi

  # When building:  "scan-build make -j8"
  if [ "$COMPILER" == "analyzer" ]
  then
      CXX=/opt/local/libexec/llvm-9.0/libexec/c++-analyzer
      CC=/opt/local/libexec/llvm-9.0/libexec/ccc-analyzer
      FC=gfortran
      CFLAGS="-Wall -Wunused"
      CXXFLAGS="-Wall -Wunused"
      FORTRAN="NO"
  fi

  if [ "$COMPILER" == "ibm" ]
  then
      CXX=xlC
      CC=xlc
      FC=xlf
  fi
fi

if [ "${APPLICATIONS}" == "YES" ] && [ "${LEGACY}" == "YES" ]
then
     SUBSET_OPTIONS="-DSeacas_ENABLE_ALL_PACKAGES:BOOL=ON \
                     -DSeacas_ENABLE_ALL_OPTIONAL_PACKAGES:BOOL=ON \
                     -DSeacas_ENABLE_SECONDARY_TESTED_CODE:BOOL=ON"
else
     SUBSET_OPTIONS="-DSeacas_ENABLE_ALL_PACKAGES:BOOL=OFF \
                     -DSeacas_ENABLE_ALL_OPTIONAL_PACKAGES:BOOL=OFF \
		     -DSeacas_ENABLE_SECONDARY_TESTED_CODE:BOOL=OFF \
                     -DSeacas_ENABLE_SEACASIoss:BOOL=ON \
		     -DSeacas_ENABLE_SEACASExodus:BOOL=ON \
		     -DSeacas_ENABLE_SEACASExodus_for:BOOL=ON \
                     -DSeacas_ENABLE_SEACASExoIIv2for32:BOOL=ON"

if [ "${APPLICATIONS}" == "YES" ]
then
     SUBSET_OPTIONS="${SUBSET_OPTIONS} \
                     -DSeacas_ENABLE_SEACASAprepro:BOOL=ON \
                     -DSeacas_ENABLE_SEACASAprepro_lib:BOOL=ON \
                     -DSeacas_ENABLE_SEACASConjoin:BOOL=ON \
                     -DSeacas_ENABLE_SEACASCpup:BOOL=ON \
                     -DSeacas_ENABLE_SEACASEjoin:BOOL=ON \
                     -DSeacas_ENABLE_SEACASEpu:BOOL=ON \
                     -DSeacas_ENABLE_SEACASExo2mat:BOOL=ON \
                     -DSeacas_ENABLE_SEACASExo_format:BOOL=ON \
                     -DSeacas_ENABLE_SEACASExodiff:BOOL=ON \
                     -DSeacas_ENABLE_SEACASMat2exo:BOOL=ON \
                     -DSeacas_ENABLE_SEACASNemslice:BOOL=ON \
                     -DSeacas_ENABLE_SEACASSlice:BOOL=ON \
                     -DSeacas_ENABLE_SEACASZellij:BOOL=ON \
                     -DSeacas_ENABLE_SEACASNemspread:BOOL=ON"

     if [ "${FORTRAN}" == "YES" ]
	then
	    SUBSET_OPTIONS="${SUBSET_OPTIONS} \
            		  -DSeacas_ENABLE_SEACASExplore:BOOL=ON \
			  -DSeacas_ENABLE_SEACASGrepos:BOOL=ON"
     fi

elif [ "${LEGACY}" == "YES" ] && [ "${FORTRAN}" == "YES" ]
then
     SUBSET_OPTIONS="${SUBSET_OPTIONS} \
                     -DSeacas_ENABLE_SEACASAlgebra:BOOL=ON \
                     -DSeacas_ENABLE_SEACASBlot:BOOL=ON \
                     -DSeacas_ENABLE_SEACASEx1ex2v2:BOOL=ON \
                     -DSeacas_ENABLE_SEACASEx2ex1v2:BOOL=ON \
                     -DSeacas_ENABLE_SEACASExomatlab:BOOL=ON \
                     -DSeacas_ENABLE_SEACASExotec2:BOOL=ON \
                     -DSeacas_ENABLE_SEACASExotxt:BOOL=ON \
                     -DSeacas_ENABLE_SEACASFastq:BOOL=ON \
                     -DSeacas_ENABLE_SEACASGen3D:BOOL=ON \
                     -DSeacas_ENABLE_SEACASGenshell:BOOL=ON \
                     -DSeacas_ENABLE_SEACASGjoin:BOOL=ON \
                     -DSeacas_ENABLE_SEACASMapvar:BOOL=ON \
                     -DSeacas_ENABLE_SEACASMapvar-kd:BOOL=ON \
                     -DSeacas_ENABLE_SEACASNemesis:BOOL=ON \
                     -DSeacas_ENABLE_SEACASTxtexo:BOOL=ON"
fi
fi

MODERN=${MODERN:-NO}
if [ "${MODERN}" == "YES" ]
then
#    MODERN_ARG="-D TPL_ENABLE_HDF5:BOOL=ON -D Netcdf_ALLOW_MODERN:BOOL=ON"
    MODERN_ARG="-DNetcdf_FORCE_MODERN:BOOL=ON -DCGNS_FORCE_MODERN:BOOL=ON"
else
    MODERN_ARG="-D HDF5_NO_SYSTEM_PATHS=YES"
fi

GENERATOR=${GENERATOR:-"Unix Makefiles"}

# If using an XLF compiler on an IBM system, may need to add the following:
# -DCMAKE_Fortran_FLAGS="-qfixed=72" \
# -DCMAKE_EXE_LINKER_FLAGS:STRING="-lxl -lxlopt"

CRAY="${CRAY:-NO}"
CRAY=$(check_valid CRAY) || exit

if [ "${CRAY}" == "YES" ]
then
    SHARED="${SHARED:-NO}"
else
    SHARED="${SHARED:-YES}"
fi
SHARED=$(check_valid SHARED) || exit

if [ "${CRAY}" == "YES" ] && [ "${SHARED}" == "NO" ]
then
  # Assumes we build our own static zlib with CRAY
  EXTRA_LIB=-DSeacas_EXTRA_LINK_FLAGS=${INSTALL_PATH}/lib/libz.a
fi

### Switch for Debug or Release build:
### Check that both `DEBUG` and `BUILD_TYPE` are not set
if [ ! -z ${DEBUG+x} ] && [ ! -z ${BUILD_TYPE+x} ]
then
    echo "ERROR: Both DEBUG and BUILD_TYPE are set. Only one is allowed."
    exit
fi

BUILD_TYPE="${BUILD_TYPE:-RELEASE}"

if [ ! -z ${DEBUG+x} ]
then
    if [ "${DEBUG}" == "ON" ] || [ "${DEBUG}" == "YES" ] || [ "${DEBUG}" == "on" ] || [ "${DEBUG}" == "yes" ]
    then
	BUILD_TYPE="DEBUG"
    elif [ "${DEBUG}" == "OFF" ] || [ "${DEBUG}" == "NO" ] || [ "${DEBUG}" == "off" ] || [ "${DEBUG}" == "no" ]
    then
	BUILD_TYPE="RELEASE"
    else
	echo "${txtred}\nERROR: Invalid value for DEBUG ('$DEBUG') -- Must be ON, YES, NO, or OFF\n${txtrst}" >& 2
	exit
    fi
fi


### If you do not have the X11 developer package on your system
### which provides X11/Xlib.h and the libX11, then change the "YES"
### below to "NO". It will disable blot and fastq
HAVE_X11=${HAVE_X11:-YES}
HAVE_X11=$(check_valid HAVE_X11) || exit

### Set to ON to enable the building of a thread-safe version of the Exodus and IOSS libraries.
THREADSAFE=${THREADSAFE:-NO}
THREADSAFE=$(check_valid THREADSAFE) || exit

function check_enable()
{
    local path=$1
    if [ -e "${path}" ]
    then
	echo "YES"
    else
	echo "NO"
    fi
}

HAVE_NETCDF=$(check_enable "${NETCDF_PATH}/include/netcdf.h")
HAVE_MATIO=$(check_enable "${MATIO_PATH}/include/matio.h")
HAVE_CGNS=$(check_enable "${CGNS_PATH}/include/cgnslib.h")
HAVE_FAODEL=$(check_enable "${FAODEL_PATH}/include/faodel/faodelConfig.h")
HAVE_ADIOS2=$(check_enable "${ADIOS2_PATH}/include/adios2.h")
HAVE_CATALYST2=$(check_enable "${CATALYST2_PATH}/include/catalyst-2.0/catalyst.h")
HAVE_GTEST=$(check_enable "${GTEST_PATH}/include/gtest/gtest.h")
HAVE_CATCH2=$(check_enable "${CATCH2_PATH}/include/catch2/catch_all.hpp")
HAVE_KOKKOS=$(check_enable "${KOKKOS_PATH}/include/Kokkos_Core.hpp")
HAVE_METIS=$(check_enable "${METIS_PATH}/include/metis.h")
HAVE_PARMETIS=$(check_enable "${METIS_PATH}/include/parmetis.h")

### DataWarp (Burst Buffer)
### I use the following for mutrino (10/16/2018):
###    module load datawarp
###    -D TPL_ENABLE_DataWarp:BOOL=ON \
###    -D DataWarp_LIBRARY_DIRS:PATH=/opt/cray/datawarp/2.1.16-6.0.5.1_2.61__g238b34d.ari/lib \
###    -D DataWarp_INCLUDE_DIRS:PATH=/opt/cray/datawarp/2.1.16-6.0.5.1_2.61__g238b34d.ari/include \

### Define to NO to *enable* exodus deprecated functions
OMIT_DEPRECATED=${OMIT_DEPRECATED:-NO}

NUMPROCS=${NUMPROCS:-4}

# BUG needs to work with cray too.
if [ "${MPI}" == "YES" ] && [ "${CRAY}" == "YES" ]
then
   MPI_EXEC=$(which srun)
   MPI_SYMBOLS="-D MPI_EXEC=${MPI_EXEC} -D MPI_EXEC_NUMPROCS_FLAG=-n  -DMPI_EXEC_DEFAULT_NUMPROCS:STRING=${NUMPROCS} -DMPI_EXEC_MAX_NUMPROCS:STRING=${NUMPROCS}"
   CXX=CC
   CC=cc
   FC=ftn
   MPI_BIN=$(dirname $(which ${CC}))
elif [ "${MPI}" == "YES" ]
then
   if [ "${USE_SRUN}" == "YES" ]
   then
       MPI_EXEC=$(which srun)
       MPI_SYMBOLS="-D MPI_EXEC=${MPI_EXEC} -D MPI_EXEC_NUMPROCS_FLAG=-N  -DMPI_EXEC_DEFAULT_NUMPROCS:STRING=${NUMPROCS} -DMPI_EXEC_MAX_NUMPROCS:STRING=${NUMPROCS}"
       MPI_BIN=$(dirname "${MPI_EXEC}")
   else
       MPI_EXEC=$(which mpiexec)
       MPI_SYMBOLS="-D MPI_EXEC=${MPI_EXEC}  -DMPI_EXEC_DEFAULT_NUMPROCS:STRING=${NUMPROCS} -DMPI_EXEC_MAX_NUMPROCS:STRING=${NUMPROCS}"
       MPI_BIN=$(dirname "${MPI_EXEC}")
   fi
   CXX=mpicxx
   CC=mpicc
   FC=mpif77
fi

OS=$(uname -s)
if [ "$SHARED" == "YES" ]
then
    if [ "$OS" == "Darwin" ] ; then
	LD_EXT="dylib"
    else
	LD_EXT="so"
    fi
else
# NOTE: Some systems may need `curl` added to Seacas_EXTRA_LINK_FLAGS`
#       If you see missing symbols containing `_curl`, try adding `curl`
#   EXTRA_LIB="-DSeacas_EXTRA_LINK_FLAGS=curl;z;dl -DSEACASExodus_ENABLE_SHARED:BOOL=OFF"
    EXTRA_LIB="-DSeacas_EXTRA_LINK_FLAGS=z;dl -DSEACASExodus_ENABLE_SHARED:BOOL=OFF"
    LD_EXT="a"
fi

if [ "${HAVE_KOKKOS}" == "YES" ]
then
    KOKKOS_SYMBOLS="-DKOKKOS_SRC_PATH:PATH=${INSTALL_PATH}/TPL/kokkos/kokkos \
		    -DTPL_Kokkos_LIBRARY_DIRS:PATH=${KOKKOS_PATH}/lib \
		    -DTPL_Kokkos_INCLUDE_DIRS:PATH=${KOKKOS_PATH}/include \
		    -DTPL_Kokkos_LIBRARIES=${KOKKOS_PATH}/lib/libkokkoscore.${LD_EXT}"
fi

if [ "$HAVE_FAODEL" == "YES" ]
then
  FAODEL_SYMBOLS=" -D TPL_ENABLE_Faodel:BOOL=${HAVE_FAODEL} \
    -D Faodel_ROOT:PATH=${FAODEL_PATH} \
    -D Faodel_INCLUDE_DIRS:PATH=${FAODEL_PATH}/include/faodel \
    "
fi

if [ "$OS" == "Darwin" ] ; then
  DARWIN_OPT="-D CMAKE_MACOSX_RPATH:BOOL=ON -D TPL_X11_INCLUDE_DIRS:PATH=/opt/X11/include"
else
  DARWIN_OPT=""
fi

# Only run doxygen if me and on master branch...
DOXYGEN=${DOXYGEN:-NO}
DOXYGEN=$(check_valid DOXYGEN) || exit

if [[ "$DOXYGEN" == "NO" && "$OS" == "Darwin" && "$MPI" == "NO" ]] ; then
    branch=$(git branch |grep \* |cut -c3-)
    USER=$(id -nu)
    if [ "$USER" == "gdsjaar" ] && [ "$branch" == "master" ]; then
	DOXYGEN=YES
    fi
fi

FC=${FC:-gfortran}

EXTRA_WARNINGS=${EXTRA_WARNINGS:-NO}
EXTRA_WARNINGS=$(check_valid EXTRA_WARNINGS) || exit

SANITIZER=${SANITIZER:-NO}

if [ "$SANITIZER" != "NO" ] ; then
### To use the clang sanitizers:
#sanitizer=address     #: AddressSanitizer, a memory error detector.
#sanitizer=integer     #: Enables checks for undefined or suspicious integer behavior.
#sanitizer=thread      #: ThreadSanitizer, a data race detector.
#sanitizer=memory      #: MemorySanitizer, experimental detector of uninitialized reads.
#sanitizer=undefined   #: Fast and compatible undefined behavior checker.
#sanitizer=dataflow    #: DataFlowSanitizer, a general data flow analysis.
#sanitizer=cfi         #: control flow integrity checks. Requires -flto.
#sanitizer=safe-stack  #: safe stack protection against stack-based memory corruption errors.
OPT_SANITIZE="-fsanitize=${SANITIZER} -fno-omit-frame-pointer -fPIC"
if [ "$SANITIZER" == "integer" ] ; then
  OPT_SANITIZE="$OPT_SANITIZE -fno-sanitize=unsigned-integer-overflow"
fi
fi

### You can add these below if you want more verbosity...
#-D CMAKE_VERBOSE_MAKEFILE:BOOL=ON \
#-D Seacas_VERBOSE_CONFIGURE=ON \

### You can add these below to regenerate the flex and bison files for
### aprepro and aprepro_lib May have to touch aprepro.l aprepro.y
### aprepro.ll and aprepro.yy to have them regenerate
#-D GENERATE_FLEX_FILES=ON \
#-D GENERATE_BISON_FILES=ON \

if [ "${EXTRA_WARNINGS}" == "YES" ]; then
### Additional gcc warnings:
if [ "$COMPILER" == "gnu" ]
then
  COMMON_WARNING_FLAGS="\
   -Wshadow -Wabsolute-value -Waddress -Waliasing -Wpedantic\
  "

  C_WARNING_FLAGS="${COMMON_WARNING_FLAGS}"

  CXX_WARNING_FLAGS="${COMMON_WARNING_FLAGS} -Wnull-dereference -Wzero-as-null-pointer-constant -Wuseless-cast -Weffc++ -Wsuggest-override"

  # -Wuseless-cast
  # -Wold-style-cast
  # -Wdouble-promotion
fi
if [ "$COMPILER" == "clang" ]
then
  C_WARNING_FLAGS="-Weverything -Wno-missing-prototypes -Wno-sign-conversion -Wno-reserved-id-macro"

  CXX_WARNING_FLAGS="-Weverything -Wno-c++98-compat -Wno-old-style-cast -Wno-sign-conversion -Wno-reserved-id-macro"
fi
fi

rm -f CMakeCache.txt
###------------------------------------------------------------------------
cmake -G "${GENERATOR}" \
-D CMAKE_CXX_COMPILER:FILEPATH=${CXX} \
-D CMAKE_C_COMPILER:FILEPATH=${CC} \
-D CMAKE_Fortran_COMPILER:FILEPATH=${FC} \
-D CMAKE_CXX_FLAGS="${CXXFLAGS} ${CXX_WARNING_FLAGS} ${OPT_SANITIZE}" \
-D CMAKE_C_FLAGS="${CFLAGS} ${C_WARNING_FLAGS} ${OPT_SANITIZE}" \
-D CMAKE_Fortran_FLAGS="${FFLAGS} ${F77_WARNING_FLAGS} ${OPT_SANITIZE}" \
-D Seacas_ENABLE_STRONG_C_COMPILE_WARNINGS=${EXTRA_WARNINGS} \
-D Seacas_ENABLE_STRONG_CXX_COMPILE_WARNINGS=${EXTRA_WARNINGS} \
-D CMAKE_INSTALL_RPATH:PATH=${INSTALL_PATH}/lib \
-D BUILD_SHARED_LIBS:BOOL=${SHARED} \
-D CMAKE_BUILD_TYPE=${BUILD_TYPE} \
${SUBSET_OPTIONS} \
-D Seacas_ENABLE_Zoltan:BOOL=${ZOLTAN} \
-D Seacas_ENABLE_TESTS=ON \
-D CMAKE_INSTALL_PREFIX:PATH=${INSTALL_PATH} \
-D Seacas_SKIP_FORTRANCINTERFACE_VERIFY_TEST:BOOL=ON \
-D Seacas_HIDE_DEPRECATED_CODE:BOOL=${OMIT_DEPRECATED} \
-D Seacas_ENABLE_DOXYGEN:BOOL=${DOXYGEN} \
-D Seacas_ENABLE_Fortran=${FORTRAN} \
${EXTRA_LIB} \
${MODERN_ARG} \
\
-D TPL_ENABLE_Netcdf:BOOL=${HAVE_NETCDF} \
-D TPL_ENABLE_Matio:BOOL=${HAVE_MATIO} \
-D TPL_ENABLE_CGNS:BOOL=${HAVE_CGNS} \
-D TPL_ENABLE_ADIOS2:BOOL=${HAVE_ADIOS2} \
-D TPL_ENABLE_Catalyst2:BOOL=${HAVE_CATALYST2} \
-D TPL_ENABLE_GTest:BOOL=${HAVE_GTEST} \
-D TPL_ENABLE_Catch2:BOOL=${HAVE_CATCH2} \
-D TPL_ENABLE_Kokkos:BOOL=${HAVE_KOKKOS} \
-D TPL_ENABLE_METIS:BOOL=${HAVE_METIS} \
-D TPL_ENABLE_ParMETIS:BOOL=${HAVE_PARMETIS} \
-D TPL_ENABLE_MPI:BOOL=${MPI} \
-D TPL_ENABLE_Pamgen:BOOL=OFF \
-D TPL_ENABLE_fmt:BOOL=ON \
-D TPL_ENABLE_Pthread:BOOL=${THREADSAFE} \
${THREAD_SAFE_OPT} \
-D TPL_ENABLE_X11:BOOL=${HAVE_X11} \
\
-D SEACASExodus_ENABLE_THREADSAFE:BOOL=${THREADSAFE} \
-D SEACASIoss_ENABLE_THREADSAFE:BOOL=${THREADSAFE} \
\
${KOKKOS_SYMBOLS} \
${MPI_SYMBOLS} \
${DARWIN_OPT} \
${FAODEL_SYMBOLS} \
\
-D MPI_BIN_DIR:PATH=${MPI_BIN} \
-D NetCDF_ROOT:PATH=${NETCDF_PATH} \
-D netCDF_ROOT:PATH=${NETCDF_PATH} \
-D HDF5_ROOT:PATH=${HDF5_PATH} \
-D HDF5_DIR:PATH=${HDF5_PATH} \
-D CGNS_ROOT:PATH=${CGNS_PATH} \
-D CGNS_DIR:PATH=${CGNS_PATH} \
-D Matio_ROOT:PATH=${MATIO_PATH} \
-D Metis_ROOT:PATH=${METIS_PATH} \
-D ParMETIS_ROOT:PATH=${PARMETIS_PATH} \
-D PNetCDF_ROOT:PATH=${PNETCDF_PATH} \
-D fmt_ROOT:PATH=${FMT_PATH} \
$EXTRA_ARGS \
${ACCESS}

echo ""
echo "          OS: ${OS}"
echo "      ACCESS: ${ACCESS}"
echo "INSTALL_PATH: ${INSTALL_PATH}"
echo "  "
echo "         CC: ${CC}"
echo "        CXX: ${CXX}"
echo "         FC: ${FC}"
echo "        MPI: ${MPI}"
echo "     SHARED: ${SHARED}"
echo "    FORTRAN: ${FORTRAN}"
echo " BUILD_TYPE: ${BUILD_TYPE}"
echo " THREADSAFE: ${THREADSAFE}"
echo "       CRAY: ${CRAY}"
echo " "
echo "     NETCDF: ${HAVE_NETCDF}"
echo "      MATIO: ${HAVE_MATIO}"
echo "       CGNS: ${HAVE_CGNS}"
echo "     KOKKOS: ${HAVE_KOKKOS}"
echo "     ZOLTAN: ${ZOLTAN}"
echo "     ADIOS2: ${HAVE_ADIOS2}"
echo "  CATALYST2: ${HAVE_CATALYST2}"
echo "      METIS: ${HAVE_METIS}"
echo "   PARMETIS: ${HAVE_PARMETIS}"
echo "     FAODEL: ${HAVE_FAODEL}"
echo "      GTEST: ${HAVE_GTEST}"
echo "     CATCH2: ${HAVE_CATCH2}"
echo "    DOXYGEN: ${DOXYGEN}"
echo ""

if [ "${TRAVIS}" == "true" ]
then
  make -j2
  cd ${ACCESS}
fi