From 6ef18734acb0814dc6c8802a73dba5ad46b2fa84 Mon Sep 17 00:00:00 2001 From: nissampa <99767762+nissampa@users.noreply.github.com> Date: Tue, 25 Jun 2024 17:18:55 -0700 Subject: [PATCH] Update Smartswitch-test-plan.md --- docs/testplan/Smartswitch-test-plan.md | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) diff --git a/docs/testplan/Smartswitch-test-plan.md b/docs/testplan/Smartswitch-test-plan.md index cf6eeb31c0..8f39c27c28 100644 --- a/docs/testplan/Smartswitch-test-plan.md +++ b/docs/testplan/Smartswitch-test-plan.md @@ -551,12 +551,6 @@ Chassis Route Processors RP0 8102-28FH-DPU-O 0.10 FLM274802F3 Cisco 28x400G QSFPDD DPU-Enabled 2RU Smart Switch,Open SW -Sled Cards - SLED0 8K-DPU400-2A 0.10 FLM2750036M Cisco 800 2xDPU Sled AMD Elba - SLED1 8K-DPU400-2A 0.10 FLM2750037E Cisco 800 2xDPU Sled AMD Elba - SLED2 8K-DPU400-2A 0.10 FLM27500389 Cisco 800 2xDPU Sled AMD Elba - SLED3 8K-DPU400-2A 0.10 FLM2750038M Cisco 800 2xDPU Sled AMD Elba - Dpu Modules DPU0 DSS-MTFUJI 6.1.0-11-2-arm64 FLM2750036M Pensando DSC DPU1 DSS-MTFUJI 6.1.0-11-2-arm64 FLM2750037M Pensando DSC @@ -630,13 +624,9 @@ root@sonic:/home/cisco# show platform pcieinfo -c ### 1.8 Check the NTP date and timezone between DPU and NPU #### Steps - * In Switch, under the file /etc/ntp.conf configure it to use the ntp server and restart ntp.service to configure - * In DPU, similarly under the ntp configuration use the switches ip as ntp server and restart ntp service to configure - * Use command `date` to start the NTP server on Swith + * Use command `date` to get date and time zone on Swith * Use command `ssh admin@169.254.x.x` to enter into required dpu. - * Use command `date` to start the NTP server on DPU - * Use command `date` to get date and time zone on host. - * Use command `date` again on dpu to show date and time zone of dpu. + * Use command `date` to get date and time zone on DPU #### Verify in * Switch and dpu