Skip to content

Latest commit

 

History

History
78 lines (57 loc) · 3.92 KB

INSTALL.md

File metadata and controls

78 lines (57 loc) · 3.92 KB
Raw

Installation

  1. Download a release from https://github.com/runeimp/gzipdate/releases
  2. For archives or packages:
    • For Zip archives (.zip) I recommend:
      1. unzip gzipdate_1.1.0_windows_x86_64.zip
      2. cd gzipdate_1.1.0_windows_x86_64
      3. copy gzipdate.exe YOUR_PREFERED_PATH
    • For Tar-Gzip archives (.tar.gz) I recommend:
      1. tar xfz gzipdate_1.1.0_freebsd_x86_64.tar.gz
      2. cd gzipdate_1.1.0_freebsd_x86_64
      3. cp gzipdate YOUR_PREFERED_PATH or ln -s gzipdate YOUR_PREFERED_PATH/gzipdate if your source folder is not going to get deleted later.
    • For the Debian packages (.deb) I recommend:
      • sudo dpkg -i /path/to/gzipdate_1.1.0_linux_x86_64.deb to install and upgrade. There are no dependencies so dpkg is fine for this task.
    • For the RedHat Package Manager (.rpm) I recommend:
      • rpm -i /path/to/gzipdate_1.1.0_linux_x86_64.rpm to install
      • rpm -U /path/to/gzipdate_1.1.0_linux_x86_64.rpm to upgrade
  3. Copy the binary to a directory in your PATH and make sure it is executable for your system. It should be ready to go by default.

Finding YOUR_PREFERED_PATH (Windows)

On Windows systems you can review your path list by:

  1. Open a Command Prompt
  2. Type ECHO "%PATH:;="&ECHO "%"

Finding YOUR_PREFERED_PATH (POSIX)

On POSIX systems (*BSD, Linux, macOS, Solaris, UNIX, etc.) you can review your path list with

$ echo $PATH | tr : "\n"
/Users/runeimp/.local/bin
/Users/runeimp/bin
/Users/runeimp/dev/lang/go/bin
/opt/local/bin
/usr/local/bin
/usr/local/sbin
/usr/bin
/usr/sbin
/bin
/sbin

If you use the command echo $PATH | tr : "\n" you should see a list similar to the example with runeimp replaced with whatever your username is on the system. Directory search priority is from top to bottom when you type in a command.

Which Paths to Avoid

On any system there are certain paths you should not install apps into. On POSIX systems any path that ends with sbin means system binary. NEVER manually install apps into an sbin path. Following is a general order of preference when installing apps on a system for all users:

  • /opt/local/bin - This is generally best as opt paths are intended for option software when it is present.
    • This is where most package managers will install binaries. If it doesn't exist you should probably install something wonderful like just or kitty with your package manager to kickstart the path.
  • /usr/local/opt - This is a good path to use if it exists in your list and /opt/local/bin is not available.
    • This is where many package managers will install binaries. If it doesn't exist you should probably install something wonderful like git or wget with your package manager to kickstart the path.
  • /usr/local/bin - This is a good path to use if neither opt path is available. Almost always available on all POSIX systems.
    • This is where most package managers will install binaries. If it doesn't exist you should probably install something wonderful like jq or htop with your package manager to kickstart the path.
  • /usr/bin - This is acceptable if none of the above paths are available. Though it should be avoided if possible.
    • If this seems to be your only option definitely try to install something with your package manager if you haven't already. Doing so should create one of the above paths which are much preferred over /usr/bin.
  • /bin - While you could technically install binaries to this path it's a very bad idea. System updates expect full control over this path and may remove or overwrite binaries you install there without warning before hand or notice after the fact.