Do not use the MASTER branch for now, what is available in the development branch is the best available, use at own risk!
Adds support for Daikin Airconditioners.
- improve and extend "error handling"
- differentiate capabilities by model (inverter, emura, still pending is the nexura)
- Homekit support
- 31-JAN-18: inside / outside / target temperature (fixed value for now) show on mobile card.
- 02-FEB-18: all data shown on mobile card is read from the airconditioner.
- 03-FEB-18: lifted the requirement to use experimental firmware v1.5.6, can now be previewed with Homey stable firmware v1.5.3.
- 04-FEB-18: translations of mode, fan, wing etc code in to meaningfull strings. Work done on changing airco setting.
- 07-FEB-18: Mobile card: temperature control is functional, mode selection functional.
- 11-FEB-18: 1/ Implemented the Apollon77 library. Note: for testing/troubleshooting purposes the airco power is always set to OFF.
- 11-FEB-18: 2/ Working on flow cards... not functional!
- 15-FEB-18: Added a trigger, condition and action flowcard.
- 16-FEB-18: 1/ Action triggers to set the: Airco Operation Mode, Fan rate, Fan direction and Target temperature.
- 16-FEB-18: 2/ Several code optimizations
- 16-FEB-18: 3/ Asset updates, now passes the Homey App Store validation cli
- 18-FEB-18: 1/ New pairing dialog
- 18-FEB-18: 2/ Emura driver enabled (still needs refinement...)
- 19-FEB-18: 1/ Flowcard fix, now available to both the Emura and Inverter driver
- 19-FEB-18: 2/ Introduced demo mode which can be set via settings
- 19-FEB-18: in demo mode the power is always OFF.
- 19-FEB-18: 3/ Mode switching: crushed a few bugs
- 20-FEB-18: The airco can now also be switched off with the mode settings wheel
- 21-FEB-18: Added a whole bunch of condition flowcards
- 22-FEB-18: Completed the flowcards for trigger (9x), condition (9x) and action (5x).
#Demo mode (upon pairing the demo mode is by default turned ON !!) Demo mode can be disabled in the device its settings menu. Demo mode can be very usefull when you are designing new flows as demo mode prevents the airco to be switched on so you can safely experiment and test your new flows (tip... turn on a lamp to verify your flow iso the airco...)
#Credits