diff --git a/docs/CROWDIN/cs/Configuration/DiaconnG8.md b/docs/CROWDIN/cs/Configuration/DiaconnG8.md
index 092d6cff4155..7fbffeb6de3f 100644
--- a/docs/CROWDIN/cs/Configuration/DiaconnG8.md
+++ b/docs/CROWDIN/cs/Configuration/DiaconnG8.md
@@ -4,55 +4,40 @@
 
 - Click on the hamburger menu in the top left corner.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_01.jpg
-  > :alt: Hamburger menu
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_01.jpg)
 
 - Click on Config Builder.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_02.jpg
-  > :alt: Config builder
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_02.jpg)
 
 - After selecting the Diaconn G8 Pump click on the Settings icon (cog wheel).
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_03.jpg
-  > :alt: Settings
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_03.jpg)
 
 - Choose Selected pump.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_04.jpg
-  > :alt: Select pump
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_04.jpg)
 
 - Select your insulin pump’s model number once it appears in the list.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_05.jpg
-  > :alt: Pump pairing
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_05.jpg)
 
 - There are two options to check your model number:
 
-  > 1. The last 5 digits of the SN number on the back of the pump.
-  > 2. Click on O button > Information > BLE > Last 5 digits.
-  > 
-  > > `{image} ../images/DiaconnG8/DiaconnG8_06.jpg
-    :alt: check model no.`
+1. The last 5 digits of the SN number on the back of the pump.
+2. Click on O button > Information > BLE > Last 5 digits.
+
+![image](../images/DiaconnG8/DiaconnG8_06.jpg)
 
 - Once you select your pump, a window appears asking for a pin code. Enter the pin number displayed on your pump to complete the connection.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_07.jpg
-  > :alt: PIN code
-  > ```
+ ![image](../images/DiaconnG8/DiaconnG8_07.jpg)
 
 ## Pump status check and log synchronization
 
 - Once your pump is connected, click on the Bluetooth symbol to check the status and to synchronize logs.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_08.jpg
-  > :alt: Bluetooth status
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_08.jpg)
 
 ## Bluetooth Troubleshooting
 
@@ -62,35 +47,25 @@
 
 - Click on the 3 dots button on the top right.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_09.jpg
-  > :alt: Preferences menu
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_09.jpg)
 
 - Click on Exit.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_10.jpg
-  > :alt: Exit
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_10.jpg)
 
 ### Method 2) If the first method doesn’t work, disconnect Bluetooth and then reconnect.
 
 - Press and hold the Bluetooth button at the top for about 3 seconds.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_11.jpg
-  > :alt: Bluetooth button
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_11.jpg)
 
 - Click on the Setting button on the paired Diaconn G8 Insulin pump.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_12.jpg
-  > :alt: Settings button
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_12.jpg)
 
 - Unpair.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_13.jpg
-  > :alt: Unpair
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_13.jpg)
 
 - Repeat the Bluetooth pairing process for the pump (see above).
 
diff --git a/docs/CROWDIN/cs/Getting-Started/Screenshots.md b/docs/CROWDIN/cs/Getting-Started/Screenshots.md
index 865ac547c43b..844210655575 100644
--- a/docs/CROWDIN/cs/Getting-Started/Screenshots.md
+++ b/docs/CROWDIN/cs/Getting-Started/Screenshots.md
@@ -200,7 +200,7 @@ You need to find out why you get duplicate BGs:
 
 * **Light blue** line: zero-temp (predicted BG if temporary basal rate at 0% would be set)
    
-   Prediction line shows how the IOB trajectory line would change if the pump stopped all insulin delivery (0% TBR).
+   Prediction line shows how the BG trajectory line would change if the pump stopped all insulin delivery (0% TBR).
    
    *This line appears only when the [SMB](Preferences-advanced-meal-assist-ama-or-super-micro-bolus-smb) algorithm is used.*
 
diff --git a/docs/CROWDIN/cs/index.md b/docs/CROWDIN/cs/index.md
index 139ca41ca24b..19b21853c8a1 100644
--- a/docs/CROWDIN/cs/index.md
+++ b/docs/CROWDIN/cs/index.md
@@ -77,7 +77,9 @@ Setting up the reporting server <./Installing-AndroidAPS/setting-up-the-reportin
 Building AAPS <./Installing-AndroidAPS/building-AAPS.md>
 Transferring and Installing AAPS <./Installing-AndroidAPS/Transferring-and-installing-AAPS.md>
 Setup Wizard<./Installing-AndroidAPS/setup-wizard.md>
-Change AAPS configuration<./Installing-AndroidAPS/change-configuration.md>
+Change AAPS configuration <./Installing-AndroidAPS/change-configuration.md>
+- Config Builder <./Configuration/Config-Builder.md>
+- Preferences <./Configuration/Preferences.md>
 Completing the objectives <./Usage/completing-the-objectives.md>
 ```
 
diff --git a/docs/CROWDIN/de/Configuration/DiaconnG8.md b/docs/CROWDIN/de/Configuration/DiaconnG8.md
index e2fbae0fbe36..cfea98353f66 100644
--- a/docs/CROWDIN/de/Configuration/DiaconnG8.md
+++ b/docs/CROWDIN/de/Configuration/DiaconnG8.md
@@ -2,57 +2,42 @@
 
 ## Bluetooth-Pairing
 
-- Klicke auf das Hamburger Menü in der oberen linken Ecke.
+- Click on the hamburger menu in the top left corner.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_01.jpg
-  > :alt: Hamburger Menü
-  > ```
+![grafik](../images/DiaconnG8/DiaconnG8_01.jpg)
 
 - Klicke auf Konfiguration.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_02.jpg
-  > :alt: Konfiguration
-  > ```
+![grafik](../images/DiaconnG8/DiaconnG8_02.jpg)
 
 - Nachdem Auswahl der Diaconn G8 Pumpe auf das Einstellungssymbol (Zahnrad) klicken.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_03.jpg
-  > :alt: Einstellungen
-  > ```
+![grafik](../images/DiaconnG8/DiaconnG8_03.jpg)
 
 - Wähle 'ausgewählte Pumpe'.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_04.jpg
-  > :alt: Pumpe auswählen
-  > ```
+![grafik](../images/DiaconnG8/DiaconnG8_04.jpg)
 
 - Wähle die Modellnummer Deiner Insulinpumpe aus, sobald sie in der Liste erscheint.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_05.jpg
-  > :alt: Pump pairing
-  > ```
+![grafik](../images/DiaconnG8/DiaconnG8_05.jpg)
 
 - Es gibt zwei Möglichkeiten, um Deine Modellnummer zu überprüfen:
 
-  > 1. Die letzten 5 Ziffern der Seriennummer auf der Rückseite der Pumpe.
-  > 2. Drücke den = Button > Information > BLE > letzte 5 Ziffern.
-  > 
-  > > `{image} ../images/DiaconnG8/DiaconnG8_06.jpg
-    :alt: "Modellnr.`
+1. Die letzten 5 Ziffern der Seriennummer auf der Rückseite der Pumpe.
+2. Drücke den = Button > Information > BLE > letzte 5 Ziffern.
+
+![grafik](../images/DiaconnG8/DiaconnG8_06.jpg)
 
 - Nach Auswahl der Pumpe erscheint ein Fenster, in dem der PIN Code abgefragt wird. Gib die PIN-Nummer ein, die auf Deiner Pumpe angezeigt wird, um die Verbindung abzuschließen.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_07.jpg
-  > :alt: PIN-Code
-  > ```
+ ![grafik](../images/DiaconnG8/DiaconnG8_07.jpg)
 
 ## Überprüfung des Pumpenstatus und Synchronisierung der Protokolle
 
 - Sobald Ihre Pumpe verbunden ist, klicke auf das Bluetooth-Symbol, um den Status zu überprüfen und die Protokolle zu synchronisieren.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_08.jpg
-  > :alt: Bluetooth-Status
-  > ```
+![grafik](../images/DiaconnG8/DiaconnG8_08.jpg)
 
 ## Bluetooth-Fehlerbehebung
 
@@ -62,35 +47,25 @@
 
 - Klicke auf die Schaltfläche mit den 3 Punkten oben rechts.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_09.jpg
-  > :alt: Menü Einstellungen
-  > ```
+![grafik](../images/DiaconnG8/DiaconnG8_09.jpg)
 
 - Klicke auf "Beenden".
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_10.jpg
-  > :alt: Beenden
-  > ```
+![grafik](../images/DiaconnG8/DiaconnG8_10.jpg)
 
 ### Methode 2) Wenn die erste Methode nicht funktioniert, trenne die Bluetooth-Verbindung und stelle sie dann wieder her.
 
 - Halte die Bluetooth-Taste an der Oberseite etwa 3 Sekunden lang gedrückt.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_11.jpg
-  > :alt: Bluetooth-Button
-  > ```
+![grafik](../images/DiaconnG8/DiaconnG8_11.jpg)
 
 - Klicke auf den Button 'Einstellungen' auf der gekoppelten Diaconn G8 Insulinpumpe.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_12.jpg
-  > :alt: Button Einstellung
-  > ```
+![grafik](../images/DiaconnG8/DiaconnG8_12.jpg)
 
 - Entkoppeln.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_13.jpg
-  > :alt: Entkoppeln
-  > ```
+![grafik](../images/DiaconnG8/DiaconnG8_13.jpg)
 
 - Wiederhole den Bluetooth-Pairing-Prozess für die Pumpe (siehe oben).
 
diff --git a/docs/CROWDIN/de/Getting-Started/Screenshots.md b/docs/CROWDIN/de/Getting-Started/Screenshots.md
index 2fc3d7a8f996..6c46d079204f 100644
--- a/docs/CROWDIN/de/Getting-Started/Screenshots.md
+++ b/docs/CROWDIN/de/Getting-Started/Screenshots.md
@@ -200,7 +200,7 @@ Du musst herausfinden, warum du doppelte BG-Daten erhältst:
 
 * **Hellblaue** Linie: zero-temp (BZ-Vorhersage bei Annahme, dass eine temporäre Basalrate mit 0% gesetzt wäre)
    
-   Die Prognoselinie zeigt, wie sich die IOB-Kurve ändern würde, wenn die Pumpe die Insulinabgabe komplett stoppen würde (0% TBR).
+   Prediction line shows how the BG trajectory line would change if the pump stopped all insulin delivery (0% TBR).
    
    *Diese Linie erscheint nur, wenn der [SMB](Preferences-advanced-meal-assist-ama-or-super-micro-bolus-smb)-Algorithmus verwendet wird.*
 
diff --git a/docs/CROWDIN/de/index.md b/docs/CROWDIN/de/index.md
index be253a67a65c..d6ff7b591a95 100644
--- a/docs/CROWDIN/de/index.md
+++ b/docs/CROWDIN/de/index.md
@@ -71,14 +71,16 @@ Kompatible Smartphones   <./Hardware/Phoneconfig.md>
 ```
 
 ```{toctree}
-:caption: 3) AAPS einrichten
-
-Einen Server für Berichte einrichten <./Installing-AndroidAPS/setting-up-the-reporting-server.md>
-AAPS erstellen <./Installing-AndroidAPS/building-AAPS.md>
-AAPS auf Dein Smartphone übertragen und installieren <./Installing-AndroidAPS/Transferring-and-installing-AAPS.md>
-AAPS Einrichtungsassistent <./Installing-AndroidAPS/setup-wizard.md>
-Deine AAPS-Konfiguration anpasse <./Installing-AndroidAPS/change-configuration.md>
-Abschließen der Ziele (Objectives) <./Usage/completing-the-objectives.md>
+:caption: 3) Setting up AAPS
+
+Setting up the reporting server <./Installing-AndroidAPS/setting-up-the-reporting-server.md>
+Building AAPS <./Installing-AndroidAPS/building-AAPS.md>
+Transferring and Installing AAPS <./Installing-AndroidAPS/Transferring-and-installing-AAPS.md>
+Setup Wizard<./Installing-AndroidAPS/setup-wizard.md>
+Change AAPS configuration <./Installing-AndroidAPS/change-configuration.md>
+- Config Builder <./Configuration/Config-Builder.md>
+- Preferences <./Configuration/Preferences.md>
+Completing the objectives <./Usage/completing-the-objectives.md>
 ```
 
 ```{toctree}
diff --git a/docs/CROWDIN/el/Configuration/DiaconnG8.md b/docs/CROWDIN/el/Configuration/DiaconnG8.md
index 16b256eef04b..4adb4de68db5 100644
--- a/docs/CROWDIN/el/Configuration/DiaconnG8.md
+++ b/docs/CROWDIN/el/Configuration/DiaconnG8.md
@@ -4,55 +4,40 @@
 
 - Click on the hamburger menu in the top left corner.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_01.jpg
-  > :alt: Hamburger menu
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_01.jpg)
 
 - Click on Config Builder.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_02.jpg
-  > :alt: Config builder
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_02.jpg)
 
 - After selecting the Diaconn G8 Pump click on the Settings icon (cog wheel).
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_03.jpg
-  > :alt: Settings
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_03.jpg)
 
 - Choose Selected pump.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_04.jpg
-  > :alt: Select pump
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_04.jpg)
 
 - Select your insulin pump’s model number once it appears in the list.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_05.jpg
-  > :alt: Pump pairing
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_05.jpg)
 
 - There are two options to check your model number:
 
-  > 1. The last 5 digits of the SN number on the back of the pump.
-  > 2. Click on O button > Information > BLE > Last 5 digits.
-  > 
-  > > `{image} ../images/DiaconnG8/DiaconnG8_06.jpg
-    :alt: check model no.`
+1. The last 5 digits of the SN number on the back of the pump.
+2. Click on O button > Information > BLE > Last 5 digits.
+
+![image](../images/DiaconnG8/DiaconnG8_06.jpg)
 
 - Once you select your pump, a window appears asking for a pin code. Enter the pin number displayed on your pump to complete the connection.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_07.jpg
-  > :alt: PIN code
-  > ```
+ ![image](../images/DiaconnG8/DiaconnG8_07.jpg)
 
 ## Pump status check and log synchronization
 
 - Once your pump is connected, click on the Bluetooth symbol to check the status and to synchronize logs.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_08.jpg
-  > :alt: Bluetooth status
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_08.jpg)
 
 ## Bluetooth Troubleshooting
 
@@ -62,35 +47,25 @@
 
 - Click on the 3 dots button on the top right.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_09.jpg
-  > :alt: Preferences menu
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_09.jpg)
 
 - Click on Exit.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_10.jpg
-  > :alt: Exit
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_10.jpg)
 
 ### Method 2) If the first method doesn’t work, disconnect Bluetooth and then reconnect.
 
 - Press and hold the Bluetooth button at the top for about 3 seconds.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_11.jpg
-  > :alt: Bluetooth button
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_11.jpg)
 
 - Click on the Setting button on the paired Diaconn G8 Insulin pump.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_12.jpg
-  > :alt: Settings button
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_12.jpg)
 
 - Unpair.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_13.jpg
-  > :alt: Unpair
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_13.jpg)
 
 - Repeat the Bluetooth pairing process for the pump (see above).
 
diff --git a/docs/CROWDIN/el/Getting-Started/Screenshots.md b/docs/CROWDIN/el/Getting-Started/Screenshots.md
index c55e862fbf11..3af345d067e3 100644
--- a/docs/CROWDIN/el/Getting-Started/Screenshots.md
+++ b/docs/CROWDIN/el/Getting-Started/Screenshots.md
@@ -200,7 +200,7 @@ Beginning with Android 3.0, you might get a warning signal beneath your BG numbe
 
 * **Ανοιχτή μπλε γραμμή**: μηδενικός προσωρινός ρυθμός (προβλεπόμενη γλυκόζη αίματος αν θα οριζόταν προσωρινός βασικός ρυθμός στο 0%)
    
-   Η γραμμή πρόβλεψης δείχνει πώς θα άλλαζε η πορεία της Ενεργής Ινσουλίνης αν η αντλία σταματούσε όλη την παροχή ινσουλίνης (0% προσωρινός βασικός ρυθμός).
+   Prediction line shows how the BG trajectory line would change if the pump stopped all insulin delivery (0% TBR).
    
    *Αυτή η γραμμή εμφανίζεται μόνο όταν χρησιμοποιείται ο αλγόριθμος [SMB](Preferences-advanced-meal-assist-ama-or-super-micro-bolus-smb).*
 
diff --git a/docs/CROWDIN/el/index.md b/docs/CROWDIN/el/index.md
index 447ee5c7841f..2d304047c6e7 100644
--- a/docs/CROWDIN/el/index.md
+++ b/docs/CROWDIN/el/index.md
@@ -77,7 +77,9 @@ Setting up the reporting server <./Installing-AndroidAPS/setting-up-the-reportin
 Building AAPS <./Installing-AndroidAPS/building-AAPS.md>
 Transferring and Installing AAPS <./Installing-AndroidAPS/Transferring-and-installing-AAPS.md>
 Setup Wizard<./Installing-AndroidAPS/setup-wizard.md>
-Change AAPS configuration<./Installing-AndroidAPS/change-configuration.md>
+Change AAPS configuration <./Installing-AndroidAPS/change-configuration.md>
+- Config Builder <./Configuration/Config-Builder.md>
+- Preferences <./Configuration/Preferences.md>
 Completing the objectives <./Usage/completing-the-objectives.md>
 ```
 
diff --git a/docs/CROWDIN/es/Configuration/DiaconnG8.md b/docs/CROWDIN/es/Configuration/DiaconnG8.md
index 16b256eef04b..8faf190cee9e 100644
--- a/docs/CROWDIN/es/Configuration/DiaconnG8.md
+++ b/docs/CROWDIN/es/Configuration/DiaconnG8.md
@@ -4,55 +4,40 @@
 
 - Click on the hamburger menu in the top left corner.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_01.jpg
-  > :alt: Hamburger menu
-  > ```
+![imagen](../images/DiaconnG8/DiaconnG8_01.jpg)
 
 - Click on Config Builder.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_02.jpg
-  > :alt: Config builder
-  > ```
+![imagen](../images/DiaconnG8/DiaconnG8_02.jpg)
 
 - After selecting the Diaconn G8 Pump click on the Settings icon (cog wheel).
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_03.jpg
-  > :alt: Settings
-  > ```
+![imagen](../images/DiaconnG8/DiaconnG8_03.jpg)
 
 - Choose Selected pump.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_04.jpg
-  > :alt: Select pump
-  > ```
+![imagen](../images/DiaconnG8/DiaconnG8_04.jpg)
 
 - Select your insulin pump’s model number once it appears in the list.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_05.jpg
-  > :alt: Pump pairing
-  > ```
+![imagen](../images/DiaconnG8/DiaconnG8_05.jpg)
 
 - There are two options to check your model number:
 
-  > 1. The last 5 digits of the SN number on the back of the pump.
-  > 2. Click on O button > Information > BLE > Last 5 digits.
-  > 
-  > > `{image} ../images/DiaconnG8/DiaconnG8_06.jpg
-    :alt: check model no.`
+1. The last 5 digits of the SN number on the back of the pump.
+2. Click on O button > Information > BLE > Last 5 digits.
+
+![imagen](../images/DiaconnG8/DiaconnG8_06.jpg)
 
 - Once you select your pump, a window appears asking for a pin code. Enter the pin number displayed on your pump to complete the connection.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_07.jpg
-  > :alt: PIN code
-  > ```
+ ![imagen](../images/DiaconnG8/DiaconnG8_07.jpg)
 
 ## Pump status check and log synchronization
 
 - Once your pump is connected, click on the Bluetooth symbol to check the status and to synchronize logs.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_08.jpg
-  > :alt: Bluetooth status
-  > ```
+![imagen](../images/DiaconnG8/DiaconnG8_08.jpg)
 
 ## Bluetooth Troubleshooting
 
@@ -62,35 +47,25 @@
 
 - Click on the 3 dots button on the top right.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_09.jpg
-  > :alt: Preferences menu
-  > ```
+![imagen](../images/DiaconnG8/DiaconnG8_09.jpg)
 
 - Click on Exit.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_10.jpg
-  > :alt: Exit
-  > ```
+![imagen](../images/DiaconnG8/DiaconnG8_10.jpg)
 
 ### Method 2) If the first method doesn’t work, disconnect Bluetooth and then reconnect.
 
 - Press and hold the Bluetooth button at the top for about 3 seconds.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_11.jpg
-  > :alt: Bluetooth button
-  > ```
+![imagen](../images/DiaconnG8/DiaconnG8_11.jpg)
 
 - Click on the Setting button on the paired Diaconn G8 Insulin pump.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_12.jpg
-  > :alt: Settings button
-  > ```
+![imagen](../images/DiaconnG8/DiaconnG8_12.jpg)
 
 - Unpair.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_13.jpg
-  > :alt: Unpair
-  > ```
+![imagen](../images/DiaconnG8/DiaconnG8_13.jpg)
 
 - Repeat the Bluetooth pairing process for the pump (see above).
 
diff --git a/docs/CROWDIN/es/Getting-Started/Screenshots.md b/docs/CROWDIN/es/Getting-Started/Screenshots.md
index d33752324fb1..150edc90cdb7 100644
--- a/docs/CROWDIN/es/Getting-Started/Screenshots.md
+++ b/docs/CROWDIN/es/Getting-Started/Screenshots.md
@@ -200,7 +200,7 @@ You need to find out why you get duplicate BGs:
 
 * **Azul claro** línea: cero-temp (predicción de la glucosa si se establecería una tasa basal temporal al 0%)
    
-   La línea de predicción muestra cómo cambiaría la línea de trayectoria de la IOB si la bomba detuviera toda la administración de insulina (0% TBR).
+   Prediction line shows how the BG trajectory line would change if the pump stopped all insulin delivery (0% TBR).
    
    *This line appears only when the [SMB](Preferences-advanced-meal-assist-ama-or-super-micro-bolus-smb) algorithm is used.*
 
diff --git a/docs/CROWDIN/es/index.md b/docs/CROWDIN/es/index.md
index 56951c508518..4bf294fcb473 100644
--- a/docs/CROWDIN/es/index.md
+++ b/docs/CROWDIN/es/index.md
@@ -77,7 +77,9 @@ Setting up the reporting server <./Installing-AndroidAPS/setting-up-the-reportin
 Building AAPS <./Installing-AndroidAPS/building-AAPS.md>
 Transferring and Installing AAPS <./Installing-AndroidAPS/Transferring-and-installing-AAPS.md>
 Setup Wizard<./Installing-AndroidAPS/setup-wizard.md>
-Change AAPS configuration<./Installing-AndroidAPS/change-configuration.md>
+Change AAPS configuration <./Installing-AndroidAPS/change-configuration.md>
+- Config Builder <./Configuration/Config-Builder.md>
+- Preferences <./Configuration/Preferences.md>
 Completing the objectives <./Usage/completing-the-objectives.md>
 ```
 
diff --git a/docs/CROWDIN/fr/Configuration/DiaconnG8.md b/docs/CROWDIN/fr/Configuration/DiaconnG8.md
index 48d2f1664fb4..5640ee620c74 100644
--- a/docs/CROWDIN/fr/Configuration/DiaconnG8.md
+++ b/docs/CROWDIN/fr/Configuration/DiaconnG8.md
@@ -2,57 +2,42 @@
 
 ## Appairage Bluetooth de la pompe à insuline
 
-- Cliquez sur le menu hamburger dans le coin supérieur gauche.
+- Click on the hamburger menu in the top left corner.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_01.jpg
-  > :alt: Menu hamburger
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_01.jpg)
 
 - Cliquez sur Configuration.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_02.jpg
-  > :alt: Générateur de configuration
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_02.jpg)
 
 - Après avoir sélectionné la pompe Diaconn G8, cliquez sur l'icône Paramètres (roue crantée).
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_03.jpg
-  > :alt: Paramètres
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_03.jpg)
 
 - Choisissez la pompe sélectionnée.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_04.jpg
-  > :alt: Sélection de la pompe
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_04.jpg)
 
 - Sélectionnez le numéro de modèle de votre pompe à insuline une fois qu'elle apparaît dans la liste.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_05.jpg
-  > :alt: Appariage de la pompe
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_05.jpg)
 
 - Il y a deux options pour vérifier votre numéro de modèle :
 
-  > 1. Les 5 derniers chiffres du numéro SN au dos de la pompe.
-  > 2. Cliquez sur le bouton O > Information > BLE > Derniers 5 chiffres.
-  > 
-  > > `{image} ../images/DiaconnG8/DiaconnG8_06.jpg
-    :alt: vérifier le n° de modèle`
+1. Les 5 derniers chiffres du numéro SN au dos de la pompe.
+2. Cliquez sur le bouton O > Information > BLE > Derniers 5 chiffres.
+
+![image](../images/DiaconnG8/DiaconnG8_06.jpg)
 
 - Une fois que vous avez sélectionné votre pompe, une fenêtre apparaît pour demander un code PIN. Entrez le code PIN affiché sur votre pompe pour terminer la connexion.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_07.jpg
-  > :alt: Code PIN
-  > ```
+ ![image](../images/DiaconnG8/DiaconnG8_07.jpg)
 
 ## Contrôle de l'état de la pompe et synchronisation des journaux
 
 - Une fois que votre pompe est connectée, cliquez sur le symbole Bluetooth pour vérifier l'état et synchroniser les journaux.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_08.jpg
-  > :alt: État du Bluetooth
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_08.jpg)
 
 ## Dépannage Bluetooth
 
@@ -62,35 +47,25 @@
 
 - Cliquez sur le menu 3 points en haut à droite.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_09.jpg
-  > :alt: Menu préferences
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_09.jpg)
 
 - Cliquez sur Quitter.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_10.jpg
-  > :alt: Quitter
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_10.jpg)
 
 ### Méthode 2) Si la première méthode ne fonctionne pas, déconnectez Bluetooth puis reconnectez-vous.
 
 - Appuyez et maintenez le bouton Bluetooth en haut pendant environ 3 secondes.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_11.jpg
-  > :alt: Bouton Bluetooth
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_11.jpg)
 
 - Cliquez sur le bouton Réglage de la pompe Diaconn G8 appairée.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_12.jpg
-  > :alt: Bouton paramètres
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_12.jpg)
 
 - Désappairage.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_13.jpg
-  > :alt: Désappairage
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_13.jpg)
 
 - Répétez le processus d'appairage Bluetooth pour la pompe (voir ci-dessus).
 
diff --git a/docs/CROWDIN/fr/Getting-Started/Screenshots.md b/docs/CROWDIN/fr/Getting-Started/Screenshots.md
index 0da37b8a4856..a29c9fa4f406 100644
--- a/docs/CROWDIN/fr/Getting-Started/Screenshots.md
+++ b/docs/CROWDIN/fr/Getting-Started/Screenshots.md
@@ -200,7 +200,7 @@ Vous devez savoir pourquoi vous avez des Gly dupliquées :
 
 * Ligne **bleu clair** ligne : zéro-temp (glycémie prévisionnelle si un débit de base temporaire à 0% était défini)
    
-   Cette ligne de prédiction montre comment la trajectoire de l'IA changerai si la pompe arrêtait toute injection d'insuline (DBT 0%).
+   Prediction line shows how the BG trajectory line would change if the pump stopped all insulin delivery (0% TBR).
    
    *Cette ligne n'apparaît que lorsque l'algorithme [SMB](Preferences-advanced-meal-assist-ama-or-super-micro-bolus-smb) est utilisé.*
 
diff --git a/docs/CROWDIN/fr/index.md b/docs/CROWDIN/fr/index.md
index a2dbc872383e..39d86abad286 100644
--- a/docs/CROWDIN/fr/index.md
+++ b/docs/CROWDIN/fr/index.md
@@ -71,14 +71,16 @@ Téléphones compatibles <./Hardware/Phoneconfig.md>
 ```
 
 ```{toctree}
-:caption: 3) Installation d'AAPS
-
-Serveur de reporting <./Installing-AndroidAPS/setting-up-the-reporting-server.md>
-Compilation d'AAPS <./Installing-AndroidAPS/building-AAPS.md>
-Transfert et Installation d'AAPS <./Installing-AndroidAPS/Transferring-and-installing-AAPS.md>
-Assistant de configuration <./Installing-AndroidAPS/setup-wizard.md>
-Modifier la configuration AAPS <./Installing-AndroidAPS/change-configuration.md>
-Compléter les objectifs <./Usage/completing-the-objectives.md>
+:caption: 3) Setting up AAPS
+
+Setting up the reporting server <./Installing-AndroidAPS/setting-up-the-reporting-server.md>
+Building AAPS <./Installing-AndroidAPS/building-AAPS.md>
+Transferring and Installing AAPS <./Installing-AndroidAPS/Transferring-and-installing-AAPS.md>
+Setup Wizard<./Installing-AndroidAPS/setup-wizard.md>
+Change AAPS configuration <./Installing-AndroidAPS/change-configuration.md>
+- Config Builder <./Configuration/Config-Builder.md>
+- Preferences <./Configuration/Preferences.md>
+Completing the objectives <./Usage/completing-the-objectives.md>
 ```
 
 ```{toctree}
diff --git a/docs/CROWDIN/he/Configuration/DiaconnG8.md b/docs/CROWDIN/he/Configuration/DiaconnG8.md
index 16b256eef04b..4adb4de68db5 100644
--- a/docs/CROWDIN/he/Configuration/DiaconnG8.md
+++ b/docs/CROWDIN/he/Configuration/DiaconnG8.md
@@ -4,55 +4,40 @@
 
 - Click on the hamburger menu in the top left corner.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_01.jpg
-  > :alt: Hamburger menu
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_01.jpg)
 
 - Click on Config Builder.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_02.jpg
-  > :alt: Config builder
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_02.jpg)
 
 - After selecting the Diaconn G8 Pump click on the Settings icon (cog wheel).
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_03.jpg
-  > :alt: Settings
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_03.jpg)
 
 - Choose Selected pump.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_04.jpg
-  > :alt: Select pump
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_04.jpg)
 
 - Select your insulin pump’s model number once it appears in the list.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_05.jpg
-  > :alt: Pump pairing
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_05.jpg)
 
 - There are two options to check your model number:
 
-  > 1. The last 5 digits of the SN number on the back of the pump.
-  > 2. Click on O button > Information > BLE > Last 5 digits.
-  > 
-  > > `{image} ../images/DiaconnG8/DiaconnG8_06.jpg
-    :alt: check model no.`
+1. The last 5 digits of the SN number on the back of the pump.
+2. Click on O button > Information > BLE > Last 5 digits.
+
+![image](../images/DiaconnG8/DiaconnG8_06.jpg)
 
 - Once you select your pump, a window appears asking for a pin code. Enter the pin number displayed on your pump to complete the connection.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_07.jpg
-  > :alt: PIN code
-  > ```
+ ![image](../images/DiaconnG8/DiaconnG8_07.jpg)
 
 ## Pump status check and log synchronization
 
 - Once your pump is connected, click on the Bluetooth symbol to check the status and to synchronize logs.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_08.jpg
-  > :alt: Bluetooth status
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_08.jpg)
 
 ## Bluetooth Troubleshooting
 
@@ -62,35 +47,25 @@
 
 - Click on the 3 dots button on the top right.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_09.jpg
-  > :alt: Preferences menu
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_09.jpg)
 
 - Click on Exit.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_10.jpg
-  > :alt: Exit
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_10.jpg)
 
 ### Method 2) If the first method doesn’t work, disconnect Bluetooth and then reconnect.
 
 - Press and hold the Bluetooth button at the top for about 3 seconds.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_11.jpg
-  > :alt: Bluetooth button
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_11.jpg)
 
 - Click on the Setting button on the paired Diaconn G8 Insulin pump.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_12.jpg
-  > :alt: Settings button
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_12.jpg)
 
 - Unpair.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_13.jpg
-  > :alt: Unpair
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_13.jpg)
 
 - Repeat the Bluetooth pairing process for the pump (see above).
 
diff --git a/docs/CROWDIN/he/Getting-Started/Screenshots.md b/docs/CROWDIN/he/Getting-Started/Screenshots.md
index 1ef0f9d85140..52f6fb25887e 100644
--- a/docs/CROWDIN/he/Getting-Started/Screenshots.md
+++ b/docs/CROWDIN/he/Getting-Started/Screenshots.md
@@ -200,7 +200,7 @@ Beginning with Android 3.0, you might get a warning signal beneath your BG numbe
 
 * עקום **כחול בהיר**: בזאלי אפס זמני (סוכר חזוי אם יוגדר קצב בזאלי זמני של 0%)
    
-   עקום החיזוי מראה כיצד ישתנה עקום האינסולין הפעיל אם המשאבה תפסיק כל מתן אינסולין (בזאלי זמני 0%).
+   Prediction line shows how the BG trajectory line would change if the pump stopped all insulin delivery (0% TBR).
    
    *שורה זו מופיעה רק כאלגוריתם [SMB](Preferences-advanced-meal-assist-ama-or-super-micro-bolus-smb) נבחר ופועל (אחרי תחילת משימה 9).*
 
diff --git a/docs/CROWDIN/he/index.md b/docs/CROWDIN/he/index.md
index 49cecd04d366..417825fce675 100644
--- a/docs/CROWDIN/he/index.md
+++ b/docs/CROWDIN/he/index.md
@@ -77,7 +77,9 @@ Setting up the reporting server <./Installing-AndroidAPS/setting-up-the-reportin
 Building AAPS <./Installing-AndroidAPS/building-AAPS.md>
 Transferring and Installing AAPS <./Installing-AndroidAPS/Transferring-and-installing-AAPS.md>
 Setup Wizard<./Installing-AndroidAPS/setup-wizard.md>
-Change AAPS configuration<./Installing-AndroidAPS/change-configuration.md>
+Change AAPS configuration <./Installing-AndroidAPS/change-configuration.md>
+- Config Builder <./Configuration/Config-Builder.md>
+- Preferences <./Configuration/Preferences.md>
 Completing the objectives <./Usage/completing-the-objectives.md>
 ```
 
diff --git a/docs/CROWDIN/ko/Configuration/DiaconnG8.md b/docs/CROWDIN/ko/Configuration/DiaconnG8.md
index 16b256eef04b..4adb4de68db5 100644
--- a/docs/CROWDIN/ko/Configuration/DiaconnG8.md
+++ b/docs/CROWDIN/ko/Configuration/DiaconnG8.md
@@ -4,55 +4,40 @@
 
 - Click on the hamburger menu in the top left corner.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_01.jpg
-  > :alt: Hamburger menu
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_01.jpg)
 
 - Click on Config Builder.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_02.jpg
-  > :alt: Config builder
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_02.jpg)
 
 - After selecting the Diaconn G8 Pump click on the Settings icon (cog wheel).
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_03.jpg
-  > :alt: Settings
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_03.jpg)
 
 - Choose Selected pump.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_04.jpg
-  > :alt: Select pump
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_04.jpg)
 
 - Select your insulin pump’s model number once it appears in the list.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_05.jpg
-  > :alt: Pump pairing
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_05.jpg)
 
 - There are two options to check your model number:
 
-  > 1. The last 5 digits of the SN number on the back of the pump.
-  > 2. Click on O button > Information > BLE > Last 5 digits.
-  > 
-  > > `{image} ../images/DiaconnG8/DiaconnG8_06.jpg
-    :alt: check model no.`
+1. The last 5 digits of the SN number on the back of the pump.
+2. Click on O button > Information > BLE > Last 5 digits.
+
+![image](../images/DiaconnG8/DiaconnG8_06.jpg)
 
 - Once you select your pump, a window appears asking for a pin code. Enter the pin number displayed on your pump to complete the connection.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_07.jpg
-  > :alt: PIN code
-  > ```
+ ![image](../images/DiaconnG8/DiaconnG8_07.jpg)
 
 ## Pump status check and log synchronization
 
 - Once your pump is connected, click on the Bluetooth symbol to check the status and to synchronize logs.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_08.jpg
-  > :alt: Bluetooth status
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_08.jpg)
 
 ## Bluetooth Troubleshooting
 
@@ -62,35 +47,25 @@
 
 - Click on the 3 dots button on the top right.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_09.jpg
-  > :alt: Preferences menu
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_09.jpg)
 
 - Click on Exit.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_10.jpg
-  > :alt: Exit
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_10.jpg)
 
 ### Method 2) If the first method doesn’t work, disconnect Bluetooth and then reconnect.
 
 - Press and hold the Bluetooth button at the top for about 3 seconds.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_11.jpg
-  > :alt: Bluetooth button
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_11.jpg)
 
 - Click on the Setting button on the paired Diaconn G8 Insulin pump.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_12.jpg
-  > :alt: Settings button
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_12.jpg)
 
 - Unpair.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_13.jpg
-  > :alt: Unpair
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_13.jpg)
 
 - Repeat the Bluetooth pairing process for the pump (see above).
 
diff --git a/docs/CROWDIN/ko/Getting-Started/Screenshots.md b/docs/CROWDIN/ko/Getting-Started/Screenshots.md
index 22d8fcdb1458..c32a3b36ebef 100644
--- a/docs/CROWDIN/ko/Getting-Started/Screenshots.md
+++ b/docs/CROWDIN/ko/Getting-Started/Screenshots.md
@@ -200,7 +200,7 @@ You need to find out why you get duplicate BGs:
 
 * **Light blue** line: zero-temp (predicted BG if temporary basal rate at 0% would be set)
    
-   Prediction line shows how the IOB trajectory line would change if the pump stopped all insulin delivery (0% TBR).
+   Prediction line shows how the BG trajectory line would change if the pump stopped all insulin delivery (0% TBR).
    
    *This line appears only when the [SMB](Preferences-advanced-meal-assist-ama-or-super-micro-bolus-smb) algorithm is used.*
 
diff --git a/docs/CROWDIN/ko/index.md b/docs/CROWDIN/ko/index.md
index 317d644b30e3..4d7e8f8c7526 100644
--- a/docs/CROWDIN/ko/index.md
+++ b/docs/CROWDIN/ko/index.md
@@ -77,7 +77,9 @@ Setting up the reporting server <./Installing-AndroidAPS/setting-up-the-reportin
 Building AAPS <./Installing-AndroidAPS/building-AAPS.md>
 Transferring and Installing AAPS <./Installing-AndroidAPS/Transferring-and-installing-AAPS.md>
 Setup Wizard<./Installing-AndroidAPS/setup-wizard.md>
-Change AAPS configuration<./Installing-AndroidAPS/change-configuration.md>
+Change AAPS configuration <./Installing-AndroidAPS/change-configuration.md>
+- Config Builder <./Configuration/Config-Builder.md>
+- Preferences <./Configuration/Preferences.md>
 Completing the objectives <./Usage/completing-the-objectives.md>
 ```
 
diff --git a/docs/CROWDIN/lt/Configuration/DiaconnG8.md b/docs/CROWDIN/lt/Configuration/DiaconnG8.md
index 16b256eef04b..4adb4de68db5 100644
--- a/docs/CROWDIN/lt/Configuration/DiaconnG8.md
+++ b/docs/CROWDIN/lt/Configuration/DiaconnG8.md
@@ -4,55 +4,40 @@
 
 - Click on the hamburger menu in the top left corner.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_01.jpg
-  > :alt: Hamburger menu
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_01.jpg)
 
 - Click on Config Builder.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_02.jpg
-  > :alt: Config builder
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_02.jpg)
 
 - After selecting the Diaconn G8 Pump click on the Settings icon (cog wheel).
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_03.jpg
-  > :alt: Settings
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_03.jpg)
 
 - Choose Selected pump.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_04.jpg
-  > :alt: Select pump
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_04.jpg)
 
 - Select your insulin pump’s model number once it appears in the list.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_05.jpg
-  > :alt: Pump pairing
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_05.jpg)
 
 - There are two options to check your model number:
 
-  > 1. The last 5 digits of the SN number on the back of the pump.
-  > 2. Click on O button > Information > BLE > Last 5 digits.
-  > 
-  > > `{image} ../images/DiaconnG8/DiaconnG8_06.jpg
-    :alt: check model no.`
+1. The last 5 digits of the SN number on the back of the pump.
+2. Click on O button > Information > BLE > Last 5 digits.
+
+![image](../images/DiaconnG8/DiaconnG8_06.jpg)
 
 - Once you select your pump, a window appears asking for a pin code. Enter the pin number displayed on your pump to complete the connection.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_07.jpg
-  > :alt: PIN code
-  > ```
+ ![image](../images/DiaconnG8/DiaconnG8_07.jpg)
 
 ## Pump status check and log synchronization
 
 - Once your pump is connected, click on the Bluetooth symbol to check the status and to synchronize logs.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_08.jpg
-  > :alt: Bluetooth status
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_08.jpg)
 
 ## Bluetooth Troubleshooting
 
@@ -62,35 +47,25 @@
 
 - Click on the 3 dots button on the top right.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_09.jpg
-  > :alt: Preferences menu
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_09.jpg)
 
 - Click on Exit.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_10.jpg
-  > :alt: Exit
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_10.jpg)
 
 ### Method 2) If the first method doesn’t work, disconnect Bluetooth and then reconnect.
 
 - Press and hold the Bluetooth button at the top for about 3 seconds.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_11.jpg
-  > :alt: Bluetooth button
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_11.jpg)
 
 - Click on the Setting button on the paired Diaconn G8 Insulin pump.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_12.jpg
-  > :alt: Settings button
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_12.jpg)
 
 - Unpair.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_13.jpg
-  > :alt: Unpair
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_13.jpg)
 
 - Repeat the Bluetooth pairing process for the pump (see above).
 
diff --git a/docs/CROWDIN/lt/Getting-Started/Screenshots.md b/docs/CROWDIN/lt/Getting-Started/Screenshots.md
index 60017f6e8f8f..8cbd6b1f5ac7 100644
--- a/docs/CROWDIN/lt/Getting-Started/Screenshots.md
+++ b/docs/CROWDIN/lt/Getting-Started/Screenshots.md
@@ -200,7 +200,7 @@ You need to find out why you get duplicate BGs:
 
 * **Light blue** line: zero-temp (predicted BG if temporary basal rate at 0% would be set)
    
-   Prediction line shows how the IOB trajectory line would change if the pump stopped all insulin delivery (0% TBR).
+   Prediction line shows how the BG trajectory line would change if the pump stopped all insulin delivery (0% TBR).
    
    *This line appears only when the [SMB](Preferences-advanced-meal-assist-ama-or-super-micro-bolus-smb) algorithm is used.*
 
diff --git a/docs/CROWDIN/lt/index.md b/docs/CROWDIN/lt/index.md
index 40bf86c50ede..82b6a3f8352f 100644
--- a/docs/CROWDIN/lt/index.md
+++ b/docs/CROWDIN/lt/index.md
@@ -77,7 +77,9 @@ Setting up the reporting server <./Installing-AndroidAPS/setting-up-the-reportin
 Building AAPS <./Installing-AndroidAPS/building-AAPS.md>
 Transferring and Installing AAPS <./Installing-AndroidAPS/Transferring-and-installing-AAPS.md>
 Setup Wizard<./Installing-AndroidAPS/setup-wizard.md>
-Change AAPS configuration<./Installing-AndroidAPS/change-configuration.md>
+Change AAPS configuration <./Installing-AndroidAPS/change-configuration.md>
+- Config Builder <./Configuration/Config-Builder.md>
+- Preferences <./Configuration/Preferences.md>
 Completing the objectives <./Usage/completing-the-objectives.md>
 ```
 
diff --git a/docs/CROWDIN/nl/Configuration/DiaconnG8.md b/docs/CROWDIN/nl/Configuration/DiaconnG8.md
index 16b256eef04b..4adb4de68db5 100644
--- a/docs/CROWDIN/nl/Configuration/DiaconnG8.md
+++ b/docs/CROWDIN/nl/Configuration/DiaconnG8.md
@@ -4,55 +4,40 @@
 
 - Click on the hamburger menu in the top left corner.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_01.jpg
-  > :alt: Hamburger menu
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_01.jpg)
 
 - Click on Config Builder.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_02.jpg
-  > :alt: Config builder
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_02.jpg)
 
 - After selecting the Diaconn G8 Pump click on the Settings icon (cog wheel).
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_03.jpg
-  > :alt: Settings
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_03.jpg)
 
 - Choose Selected pump.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_04.jpg
-  > :alt: Select pump
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_04.jpg)
 
 - Select your insulin pump’s model number once it appears in the list.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_05.jpg
-  > :alt: Pump pairing
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_05.jpg)
 
 - There are two options to check your model number:
 
-  > 1. The last 5 digits of the SN number on the back of the pump.
-  > 2. Click on O button > Information > BLE > Last 5 digits.
-  > 
-  > > `{image} ../images/DiaconnG8/DiaconnG8_06.jpg
-    :alt: check model no.`
+1. The last 5 digits of the SN number on the back of the pump.
+2. Click on O button > Information > BLE > Last 5 digits.
+
+![image](../images/DiaconnG8/DiaconnG8_06.jpg)
 
 - Once you select your pump, a window appears asking for a pin code. Enter the pin number displayed on your pump to complete the connection.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_07.jpg
-  > :alt: PIN code
-  > ```
+ ![image](../images/DiaconnG8/DiaconnG8_07.jpg)
 
 ## Pump status check and log synchronization
 
 - Once your pump is connected, click on the Bluetooth symbol to check the status and to synchronize logs.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_08.jpg
-  > :alt: Bluetooth status
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_08.jpg)
 
 ## Bluetooth Troubleshooting
 
@@ -62,35 +47,25 @@
 
 - Click on the 3 dots button on the top right.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_09.jpg
-  > :alt: Preferences menu
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_09.jpg)
 
 - Click on Exit.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_10.jpg
-  > :alt: Exit
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_10.jpg)
 
 ### Method 2) If the first method doesn’t work, disconnect Bluetooth and then reconnect.
 
 - Press and hold the Bluetooth button at the top for about 3 seconds.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_11.jpg
-  > :alt: Bluetooth button
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_11.jpg)
 
 - Click on the Setting button on the paired Diaconn G8 Insulin pump.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_12.jpg
-  > :alt: Settings button
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_12.jpg)
 
 - Unpair.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_13.jpg
-  > :alt: Unpair
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_13.jpg)
 
 - Repeat the Bluetooth pairing process for the pump (see above).
 
diff --git a/docs/CROWDIN/nl/Getting-Started/Screenshots.md b/docs/CROWDIN/nl/Getting-Started/Screenshots.md
index 4b9901516043..8aecbafade3b 100644
--- a/docs/CROWDIN/nl/Getting-Started/Screenshots.md
+++ b/docs/CROWDIN/nl/Getting-Started/Screenshots.md
@@ -200,7 +200,7 @@ You need to find out why you get duplicate BGs:
 
 * **Light blue** line: zero-temp (predicted BG if temporary basal rate at 0% would be set)
    
-   Prediction line shows how the IOB trajectory line would change if the pump stopped all insulin delivery (0% TBR).
+   Prediction line shows how the BG trajectory line would change if the pump stopped all insulin delivery (0% TBR).
    
    *This line appears only when the [SMB](Preferences-advanced-meal-assist-ama-or-super-micro-bolus-smb) algorithm is used.*
 
diff --git a/docs/CROWDIN/nl/index.md b/docs/CROWDIN/nl/index.md
index 12e6f7350d1d..5baa7d3b961b 100644
--- a/docs/CROWDIN/nl/index.md
+++ b/docs/CROWDIN/nl/index.md
@@ -77,7 +77,9 @@ Setting up the reporting server <./Installing-AndroidAPS/setting-up-the-reportin
 Building AAPS <./Installing-AndroidAPS/building-AAPS.md>
 Transferring and Installing AAPS <./Installing-AndroidAPS/Transferring-and-installing-AAPS.md>
 Setup Wizard<./Installing-AndroidAPS/setup-wizard.md>
-Change AAPS configuration<./Installing-AndroidAPS/change-configuration.md>
+Change AAPS configuration <./Installing-AndroidAPS/change-configuration.md>
+- Config Builder <./Configuration/Config-Builder.md>
+- Preferences <./Configuration/Preferences.md>
 Completing the objectives <./Usage/completing-the-objectives.md>
 ```
 
diff --git a/docs/CROWDIN/pb/Configuration/DiaconnG8.md b/docs/CROWDIN/pb/Configuration/DiaconnG8.md
index 16b256eef04b..4adb4de68db5 100644
--- a/docs/CROWDIN/pb/Configuration/DiaconnG8.md
+++ b/docs/CROWDIN/pb/Configuration/DiaconnG8.md
@@ -4,55 +4,40 @@
 
 - Click on the hamburger menu in the top left corner.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_01.jpg
-  > :alt: Hamburger menu
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_01.jpg)
 
 - Click on Config Builder.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_02.jpg
-  > :alt: Config builder
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_02.jpg)
 
 - After selecting the Diaconn G8 Pump click on the Settings icon (cog wheel).
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_03.jpg
-  > :alt: Settings
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_03.jpg)
 
 - Choose Selected pump.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_04.jpg
-  > :alt: Select pump
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_04.jpg)
 
 - Select your insulin pump’s model number once it appears in the list.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_05.jpg
-  > :alt: Pump pairing
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_05.jpg)
 
 - There are two options to check your model number:
 
-  > 1. The last 5 digits of the SN number on the back of the pump.
-  > 2. Click on O button > Information > BLE > Last 5 digits.
-  > 
-  > > `{image} ../images/DiaconnG8/DiaconnG8_06.jpg
-    :alt: check model no.`
+1. The last 5 digits of the SN number on the back of the pump.
+2. Click on O button > Information > BLE > Last 5 digits.
+
+![image](../images/DiaconnG8/DiaconnG8_06.jpg)
 
 - Once you select your pump, a window appears asking for a pin code. Enter the pin number displayed on your pump to complete the connection.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_07.jpg
-  > :alt: PIN code
-  > ```
+ ![image](../images/DiaconnG8/DiaconnG8_07.jpg)
 
 ## Pump status check and log synchronization
 
 - Once your pump is connected, click on the Bluetooth symbol to check the status and to synchronize logs.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_08.jpg
-  > :alt: Bluetooth status
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_08.jpg)
 
 ## Bluetooth Troubleshooting
 
@@ -62,35 +47,25 @@
 
 - Click on the 3 dots button on the top right.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_09.jpg
-  > :alt: Preferences menu
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_09.jpg)
 
 - Click on Exit.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_10.jpg
-  > :alt: Exit
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_10.jpg)
 
 ### Method 2) If the first method doesn’t work, disconnect Bluetooth and then reconnect.
 
 - Press and hold the Bluetooth button at the top for about 3 seconds.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_11.jpg
-  > :alt: Bluetooth button
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_11.jpg)
 
 - Click on the Setting button on the paired Diaconn G8 Insulin pump.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_12.jpg
-  > :alt: Settings button
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_12.jpg)
 
 - Unpair.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_13.jpg
-  > :alt: Unpair
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_13.jpg)
 
 - Repeat the Bluetooth pairing process for the pump (see above).
 
diff --git a/docs/CROWDIN/pb/Getting-Started/Screenshots.md b/docs/CROWDIN/pb/Getting-Started/Screenshots.md
index 04c499537bf7..6c4d703f1df1 100644
--- a/docs/CROWDIN/pb/Getting-Started/Screenshots.md
+++ b/docs/CROWDIN/pb/Getting-Started/Screenshots.md
@@ -200,7 +200,7 @@ You need to find out why you get duplicate BGs:
 
 * **Light blue** line: zero-temp (predicted BG if temporary basal rate at 0% would be set)
    
-   Prediction line shows how the IOB trajectory line would change if the pump stopped all insulin delivery (0% TBR).
+   Prediction line shows how the BG trajectory line would change if the pump stopped all insulin delivery (0% TBR).
    
    *This line appears only when the [SMB](Preferences-advanced-meal-assist-ama-or-super-micro-bolus-smb) algorithm is used.*
 
diff --git a/docs/CROWDIN/pb/index.md b/docs/CROWDIN/pb/index.md
index e3276404fcf3..609f72399a00 100644
--- a/docs/CROWDIN/pb/index.md
+++ b/docs/CROWDIN/pb/index.md
@@ -77,7 +77,9 @@ Setting up the reporting server <./Installing-AndroidAPS/setting-up-the-reportin
 Building AAPS <./Installing-AndroidAPS/building-AAPS.md>
 Transferring and Installing AAPS <./Installing-AndroidAPS/Transferring-and-installing-AAPS.md>
 Setup Wizard<./Installing-AndroidAPS/setup-wizard.md>
-Change AAPS configuration<./Installing-AndroidAPS/change-configuration.md>
+Change AAPS configuration <./Installing-AndroidAPS/change-configuration.md>
+- Config Builder <./Configuration/Config-Builder.md>
+- Preferences <./Configuration/Preferences.md>
 Completing the objectives <./Usage/completing-the-objectives.md>
 ```
 
diff --git a/docs/CROWDIN/pl/Configuration/DiaconnG8.md b/docs/CROWDIN/pl/Configuration/DiaconnG8.md
index 16b256eef04b..4adb4de68db5 100644
--- a/docs/CROWDIN/pl/Configuration/DiaconnG8.md
+++ b/docs/CROWDIN/pl/Configuration/DiaconnG8.md
@@ -4,55 +4,40 @@
 
 - Click on the hamburger menu in the top left corner.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_01.jpg
-  > :alt: Hamburger menu
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_01.jpg)
 
 - Click on Config Builder.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_02.jpg
-  > :alt: Config builder
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_02.jpg)
 
 - After selecting the Diaconn G8 Pump click on the Settings icon (cog wheel).
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_03.jpg
-  > :alt: Settings
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_03.jpg)
 
 - Choose Selected pump.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_04.jpg
-  > :alt: Select pump
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_04.jpg)
 
 - Select your insulin pump’s model number once it appears in the list.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_05.jpg
-  > :alt: Pump pairing
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_05.jpg)
 
 - There are two options to check your model number:
 
-  > 1. The last 5 digits of the SN number on the back of the pump.
-  > 2. Click on O button > Information > BLE > Last 5 digits.
-  > 
-  > > `{image} ../images/DiaconnG8/DiaconnG8_06.jpg
-    :alt: check model no.`
+1. The last 5 digits of the SN number on the back of the pump.
+2. Click on O button > Information > BLE > Last 5 digits.
+
+![image](../images/DiaconnG8/DiaconnG8_06.jpg)
 
 - Once you select your pump, a window appears asking for a pin code. Enter the pin number displayed on your pump to complete the connection.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_07.jpg
-  > :alt: PIN code
-  > ```
+ ![image](../images/DiaconnG8/DiaconnG8_07.jpg)
 
 ## Pump status check and log synchronization
 
 - Once your pump is connected, click on the Bluetooth symbol to check the status and to synchronize logs.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_08.jpg
-  > :alt: Bluetooth status
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_08.jpg)
 
 ## Bluetooth Troubleshooting
 
@@ -62,35 +47,25 @@
 
 - Click on the 3 dots button on the top right.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_09.jpg
-  > :alt: Preferences menu
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_09.jpg)
 
 - Click on Exit.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_10.jpg
-  > :alt: Exit
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_10.jpg)
 
 ### Method 2) If the first method doesn’t work, disconnect Bluetooth and then reconnect.
 
 - Press and hold the Bluetooth button at the top for about 3 seconds.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_11.jpg
-  > :alt: Bluetooth button
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_11.jpg)
 
 - Click on the Setting button on the paired Diaconn G8 Insulin pump.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_12.jpg
-  > :alt: Settings button
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_12.jpg)
 
 - Unpair.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_13.jpg
-  > :alt: Unpair
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_13.jpg)
 
 - Repeat the Bluetooth pairing process for the pump (see above).
 
diff --git a/docs/CROWDIN/pl/Getting-Started/Screenshots.md b/docs/CROWDIN/pl/Getting-Started/Screenshots.md
index 45a0de6c2b4e..afd8770b88e6 100644
--- a/docs/CROWDIN/pl/Getting-Started/Screenshots.md
+++ b/docs/CROWDIN/pl/Getting-Started/Screenshots.md
@@ -200,7 +200,7 @@ You need to find out why you get duplicate BGs:
 
 * **Light blue** line: zero-temp (predicted BG if temporary basal rate at 0% would be set)
    
-   Prediction line shows how the IOB trajectory line would change if the pump stopped all insulin delivery (0% TBR).
+   Prediction line shows how the BG trajectory line would change if the pump stopped all insulin delivery (0% TBR).
    
    *This line appears only when the [SMB](Preferences-advanced-meal-assist-ama-or-super-micro-bolus-smb) algorithm is used.*
 
diff --git a/docs/CROWDIN/pl/index.md b/docs/CROWDIN/pl/index.md
index 6d89f3ab0212..dfb7badd1ffd 100644
--- a/docs/CROWDIN/pl/index.md
+++ b/docs/CROWDIN/pl/index.md
@@ -77,7 +77,9 @@ Setting up the reporting server <./Installing-AndroidAPS/setting-up-the-reportin
 Building AAPS <./Installing-AndroidAPS/building-AAPS.md>
 Transferring and Installing AAPS <./Installing-AndroidAPS/Transferring-and-installing-AAPS.md>
 Setup Wizard<./Installing-AndroidAPS/setup-wizard.md>
-Change AAPS configuration<./Installing-AndroidAPS/change-configuration.md>
+Change AAPS configuration <./Installing-AndroidAPS/change-configuration.md>
+- Config Builder <./Configuration/Config-Builder.md>
+- Preferences <./Configuration/Preferences.md>
 Completing the objectives <./Usage/completing-the-objectives.md>
 ```
 
diff --git a/docs/CROWDIN/pt/Configuration/DiaconnG8.md b/docs/CROWDIN/pt/Configuration/DiaconnG8.md
index 16b256eef04b..4adb4de68db5 100644
--- a/docs/CROWDIN/pt/Configuration/DiaconnG8.md
+++ b/docs/CROWDIN/pt/Configuration/DiaconnG8.md
@@ -4,55 +4,40 @@
 
 - Click on the hamburger menu in the top left corner.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_01.jpg
-  > :alt: Hamburger menu
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_01.jpg)
 
 - Click on Config Builder.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_02.jpg
-  > :alt: Config builder
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_02.jpg)
 
 - After selecting the Diaconn G8 Pump click on the Settings icon (cog wheel).
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_03.jpg
-  > :alt: Settings
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_03.jpg)
 
 - Choose Selected pump.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_04.jpg
-  > :alt: Select pump
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_04.jpg)
 
 - Select your insulin pump’s model number once it appears in the list.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_05.jpg
-  > :alt: Pump pairing
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_05.jpg)
 
 - There are two options to check your model number:
 
-  > 1. The last 5 digits of the SN number on the back of the pump.
-  > 2. Click on O button > Information > BLE > Last 5 digits.
-  > 
-  > > `{image} ../images/DiaconnG8/DiaconnG8_06.jpg
-    :alt: check model no.`
+1. The last 5 digits of the SN number on the back of the pump.
+2. Click on O button > Information > BLE > Last 5 digits.
+
+![image](../images/DiaconnG8/DiaconnG8_06.jpg)
 
 - Once you select your pump, a window appears asking for a pin code. Enter the pin number displayed on your pump to complete the connection.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_07.jpg
-  > :alt: PIN code
-  > ```
+ ![image](../images/DiaconnG8/DiaconnG8_07.jpg)
 
 ## Pump status check and log synchronization
 
 - Once your pump is connected, click on the Bluetooth symbol to check the status and to synchronize logs.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_08.jpg
-  > :alt: Bluetooth status
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_08.jpg)
 
 ## Bluetooth Troubleshooting
 
@@ -62,35 +47,25 @@
 
 - Click on the 3 dots button on the top right.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_09.jpg
-  > :alt: Preferences menu
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_09.jpg)
 
 - Click on Exit.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_10.jpg
-  > :alt: Exit
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_10.jpg)
 
 ### Method 2) If the first method doesn’t work, disconnect Bluetooth and then reconnect.
 
 - Press and hold the Bluetooth button at the top for about 3 seconds.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_11.jpg
-  > :alt: Bluetooth button
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_11.jpg)
 
 - Click on the Setting button on the paired Diaconn G8 Insulin pump.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_12.jpg
-  > :alt: Settings button
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_12.jpg)
 
 - Unpair.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_13.jpg
-  > :alt: Unpair
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_13.jpg)
 
 - Repeat the Bluetooth pairing process for the pump (see above).
 
diff --git a/docs/CROWDIN/pt/Getting-Started/Screenshots.md b/docs/CROWDIN/pt/Getting-Started/Screenshots.md
index 9ef0a87ea1a1..53a99e635b81 100644
--- a/docs/CROWDIN/pt/Getting-Started/Screenshots.md
+++ b/docs/CROWDIN/pt/Getting-Started/Screenshots.md
@@ -200,7 +200,7 @@ You need to find out why you get duplicate BGs:
 
 * **Light blue** line: zero-temp (predicted BG if temporary basal rate at 0% would be set)
    
-   Prediction line shows how the IOB trajectory line would change if the pump stopped all insulin delivery (0% TBR).
+   Prediction line shows how the BG trajectory line would change if the pump stopped all insulin delivery (0% TBR).
    
    *This line appears only when the [SMB](Preferences-advanced-meal-assist-ama-or-super-micro-bolus-smb) algorithm is used.*
 
diff --git a/docs/CROWDIN/pt/index.md b/docs/CROWDIN/pt/index.md
index 40b2d53256ee..7df337efae1d 100644
--- a/docs/CROWDIN/pt/index.md
+++ b/docs/CROWDIN/pt/index.md
@@ -77,7 +77,9 @@ Setting up the reporting server <./Installing-AndroidAPS/setting-up-the-reportin
 Building AAPS <./Installing-AndroidAPS/building-AAPS.md>
 Transferring and Installing AAPS <./Installing-AndroidAPS/Transferring-and-installing-AAPS.md>
 Setup Wizard<./Installing-AndroidAPS/setup-wizard.md>
-Change AAPS configuration<./Installing-AndroidAPS/change-configuration.md>
+Change AAPS configuration <./Installing-AndroidAPS/change-configuration.md>
+- Config Builder <./Configuration/Config-Builder.md>
+- Preferences <./Configuration/Preferences.md>
 Completing the objectives <./Usage/completing-the-objectives.md>
 ```
 
diff --git a/docs/CROWDIN/ro/Configuration/DiaconnG8.md b/docs/CROWDIN/ro/Configuration/DiaconnG8.md
index 16b256eef04b..4adb4de68db5 100644
--- a/docs/CROWDIN/ro/Configuration/DiaconnG8.md
+++ b/docs/CROWDIN/ro/Configuration/DiaconnG8.md
@@ -4,55 +4,40 @@
 
 - Click on the hamburger menu in the top left corner.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_01.jpg
-  > :alt: Hamburger menu
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_01.jpg)
 
 - Click on Config Builder.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_02.jpg
-  > :alt: Config builder
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_02.jpg)
 
 - After selecting the Diaconn G8 Pump click on the Settings icon (cog wheel).
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_03.jpg
-  > :alt: Settings
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_03.jpg)
 
 - Choose Selected pump.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_04.jpg
-  > :alt: Select pump
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_04.jpg)
 
 - Select your insulin pump’s model number once it appears in the list.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_05.jpg
-  > :alt: Pump pairing
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_05.jpg)
 
 - There are two options to check your model number:
 
-  > 1. The last 5 digits of the SN number on the back of the pump.
-  > 2. Click on O button > Information > BLE > Last 5 digits.
-  > 
-  > > `{image} ../images/DiaconnG8/DiaconnG8_06.jpg
-    :alt: check model no.`
+1. The last 5 digits of the SN number on the back of the pump.
+2. Click on O button > Information > BLE > Last 5 digits.
+
+![image](../images/DiaconnG8/DiaconnG8_06.jpg)
 
 - Once you select your pump, a window appears asking for a pin code. Enter the pin number displayed on your pump to complete the connection.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_07.jpg
-  > :alt: PIN code
-  > ```
+ ![image](../images/DiaconnG8/DiaconnG8_07.jpg)
 
 ## Pump status check and log synchronization
 
 - Once your pump is connected, click on the Bluetooth symbol to check the status and to synchronize logs.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_08.jpg
-  > :alt: Bluetooth status
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_08.jpg)
 
 ## Bluetooth Troubleshooting
 
@@ -62,35 +47,25 @@
 
 - Click on the 3 dots button on the top right.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_09.jpg
-  > :alt: Preferences menu
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_09.jpg)
 
 - Click on Exit.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_10.jpg
-  > :alt: Exit
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_10.jpg)
 
 ### Method 2) If the first method doesn’t work, disconnect Bluetooth and then reconnect.
 
 - Press and hold the Bluetooth button at the top for about 3 seconds.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_11.jpg
-  > :alt: Bluetooth button
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_11.jpg)
 
 - Click on the Setting button on the paired Diaconn G8 Insulin pump.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_12.jpg
-  > :alt: Settings button
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_12.jpg)
 
 - Unpair.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_13.jpg
-  > :alt: Unpair
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_13.jpg)
 
 - Repeat the Bluetooth pairing process for the pump (see above).
 
diff --git a/docs/CROWDIN/ro/Getting-Started/Screenshots.md b/docs/CROWDIN/ro/Getting-Started/Screenshots.md
index dc5685e8ff16..379ec1253ecd 100644
--- a/docs/CROWDIN/ro/Getting-Started/Screenshots.md
+++ b/docs/CROWDIN/ro/Getting-Started/Screenshots.md
@@ -200,7 +200,7 @@ You need to find out why you get duplicate BGs:
 
 * **Light blue** line: zero-temp (predicted BG if temporary basal rate at 0% would be set)
    
-   Prediction line shows how the IOB trajectory line would change if the pump stopped all insulin delivery (0% TBR).
+   Prediction line shows how the BG trajectory line would change if the pump stopped all insulin delivery (0% TBR).
    
    *This line appears only when the [SMB](Preferences-advanced-meal-assist-ama-or-super-micro-bolus-smb) algorithm is used.*
 
diff --git a/docs/CROWDIN/ro/index.md b/docs/CROWDIN/ro/index.md
index e3276404fcf3..609f72399a00 100644
--- a/docs/CROWDIN/ro/index.md
+++ b/docs/CROWDIN/ro/index.md
@@ -77,7 +77,9 @@ Setting up the reporting server <./Installing-AndroidAPS/setting-up-the-reportin
 Building AAPS <./Installing-AndroidAPS/building-AAPS.md>
 Transferring and Installing AAPS <./Installing-AndroidAPS/Transferring-and-installing-AAPS.md>
 Setup Wizard<./Installing-AndroidAPS/setup-wizard.md>
-Change AAPS configuration<./Installing-AndroidAPS/change-configuration.md>
+Change AAPS configuration <./Installing-AndroidAPS/change-configuration.md>
+- Config Builder <./Configuration/Config-Builder.md>
+- Preferences <./Configuration/Preferences.md>
 Completing the objectives <./Usage/completing-the-objectives.md>
 ```
 
diff --git a/docs/CROWDIN/ru/Configuration/DiaconnG8.md b/docs/CROWDIN/ru/Configuration/DiaconnG8.md
index 38c27d97f05f..3647be67256a 100644
--- a/docs/CROWDIN/ru/Configuration/DiaconnG8.md
+++ b/docs/CROWDIN/ru/Configuration/DiaconnG8.md
@@ -2,57 +2,42 @@
 
 ## Bluetooth-сопряжение
 
-- Нажмите на выпадающее меню в левом верхнем углу.
+- Click on the hamburger menu in the top left corner.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_01.jpg
-  > :alt: Выпадающее сэндвич-меню
-  > ```
+![изображение](../images/DiaconnG8/DiaconnG8_01.jpg)
 
 - Выберите Конфигуратор.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_02.jpg
-  > :alt:Конфигуратор
-  > ```
+![изображение](../images/DiaconnG8/DiaconnG8_02.jpg)
 
 - После выбора помпы Diaconn G8 щелкните на иконку настроек (шестеренка).
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_03.jpg
-  > :alt:Настройки
-  > ```
+![изображение](../images/DiaconnG8/DiaconnG8_03.jpg)
 
 - Выберите помпу.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_04.jpg
-  > :alt: Выбор помпы
-  > ```
+![изображение](../images/DiaconnG8/DiaconnG8_04.jpg)
 
 - Выберите номер модели вашей инсулиновой помпы.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_05.jpg
-  > :alt: Сопряжение помпы
-  > ```
+![изображение](../images/DiaconnG8/DiaconnG8_05.jpg)
 
 - Есть два варианта проверки номера модели:
 
-  > 1. Последние 5 цифр номера SN на задней панели помпы.
-  > 2. Нажмите на кнопку O > Информация > BLE > Последние 5 цифр.
-  > 
-  > > `{image} ../images/DiaconnG8/DiaconnG8_06.jpg
-    :alt: проверить модель.`
+1. Последние 5 цифр номера SN на задней панели помпы.
+2. Нажмите на кнопку O > Информация > BLE > Последние 5 цифр.
+
+![изображение](../images/DiaconnG8/DiaconnG8_06.jpg)
 
 - Когда выберете помпу, появится окно с запросом PIN-кода. Введите PIN, отображаемый на вашей помпе для завершения сопряжения.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_07.jpg
-  > :alt: ПИН-код
-  > ```
+ ![изображение](../images/DiaconnG8/DiaconnG8_07.jpg)
 
 ## Проверка статуса помпы и синхронизация журнала
 
 - После подключения помпы нажмите на символ Bluetooth, чтобы проверить статус и синхронизировать журналы.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_08.jpg
-  > :alt:Статус Bluetooth
-  > ```
+![изображение](../images/DiaconnG8/DiaconnG8_08.jpg)
 
 ## Устранение неполадок Bluetooth-соединения
 
@@ -62,35 +47,25 @@
 
 - Нажмите на 3 точки в правом верхнем углу.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_09.jpg
-  > :alt: Меню настроек
-  > ```
+![изображение](../images/DiaconnG8/DiaconnG8_09.jpg)
 
 - Нажмите выход.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_10.jpg
-  > :alt: Выход
-  > ```
+![изображение](../images/DiaconnG8/DiaconnG8_10.jpg)
 
 ### Метод 2) Если первый метод не работает, отключите Bluetooth и подключите заново.
 
 - Нажмите и удерживайте кнопку Bluetooth в верхней части примерно 3 секунды.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_11.jpg
-  > :alt: Кнопка Bluetooth
-  > ```
+![изображение](../images/DiaconnG8/DiaconnG8_11.jpg)
 
 - Нажмите кнопку настроек на сопряженной помпе Diaconn G8.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_12.jpg
-  > :alt:Кнопка настроек
-  > ```
+![изображение](../images/DiaconnG8/DiaconnG8_12.jpg)
 
 - Разъединение.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_13.jpg
-  > :alt: Разъединение
-  > ```
+![изображение](../images/DiaconnG8/DiaconnG8_13.jpg)
 
 - Повторите процесс подключения к Bluetooth помпы (см. выше).
 
diff --git a/docs/CROWDIN/ru/Getting-Started/Screenshots.md b/docs/CROWDIN/ru/Getting-Started/Screenshots.md
index 3ed349af841e..8325ed13ebee 100644
--- a/docs/CROWDIN/ru/Getting-Started/Screenshots.md
+++ b/docs/CROWDIN/ru/Getting-Started/Screenshots.md
@@ -200,7 +200,7 @@
 
 * **Голубая** линия: нулевой временный базал (предсказанная ГК, если будет установлена временная базальная скорость в 0%)
    
-   В строке прогноза показано, как изменится линия траектории активного инсулина IOB, если помпа прекратит подачу инсулина (0% TBR).
+   Prediction line shows how the BG trajectory line would change if the pump stopped all insulin delivery (0% TBR).
    
    *Эта линия появляется только когда используется алгоритм [СМБ](Preferences-advanced-meal-assist-ama-or-super-micro-bolus-smb).*
 
diff --git a/docs/CROWDIN/ru/index.md b/docs/CROWDIN/ru/index.md
index af3cb4c5b161..fd6d63d2f125 100644
--- a/docs/CROWDIN/ru/index.md
+++ b/docs/CROWDIN/ru/index.md
@@ -77,7 +77,9 @@ Setting up the reporting server <./Installing-AndroidAPS/setting-up-the-reportin
 Building AAPS <./Installing-AndroidAPS/building-AAPS.md>
 Transferring and Installing AAPS <./Installing-AndroidAPS/Transferring-and-installing-AAPS.md>
 Setup Wizard<./Installing-AndroidAPS/setup-wizard.md>
-Change AAPS configuration<./Installing-AndroidAPS/change-configuration.md>
+Change AAPS configuration <./Installing-AndroidAPS/change-configuration.md>
+- Config Builder <./Configuration/Config-Builder.md>
+- Preferences <./Configuration/Preferences.md>
 Completing the objectives <./Usage/completing-the-objectives.md>
 ```
 
diff --git a/docs/CROWDIN/sk/Configuration/DiaconnG8.md b/docs/CROWDIN/sk/Configuration/DiaconnG8.md
index 16b256eef04b..4adb4de68db5 100644
--- a/docs/CROWDIN/sk/Configuration/DiaconnG8.md
+++ b/docs/CROWDIN/sk/Configuration/DiaconnG8.md
@@ -4,55 +4,40 @@
 
 - Click on the hamburger menu in the top left corner.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_01.jpg
-  > :alt: Hamburger menu
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_01.jpg)
 
 - Click on Config Builder.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_02.jpg
-  > :alt: Config builder
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_02.jpg)
 
 - After selecting the Diaconn G8 Pump click on the Settings icon (cog wheel).
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_03.jpg
-  > :alt: Settings
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_03.jpg)
 
 - Choose Selected pump.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_04.jpg
-  > :alt: Select pump
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_04.jpg)
 
 - Select your insulin pump’s model number once it appears in the list.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_05.jpg
-  > :alt: Pump pairing
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_05.jpg)
 
 - There are two options to check your model number:
 
-  > 1. The last 5 digits of the SN number on the back of the pump.
-  > 2. Click on O button > Information > BLE > Last 5 digits.
-  > 
-  > > `{image} ../images/DiaconnG8/DiaconnG8_06.jpg
-    :alt: check model no.`
+1. The last 5 digits of the SN number on the back of the pump.
+2. Click on O button > Information > BLE > Last 5 digits.
+
+![image](../images/DiaconnG8/DiaconnG8_06.jpg)
 
 - Once you select your pump, a window appears asking for a pin code. Enter the pin number displayed on your pump to complete the connection.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_07.jpg
-  > :alt: PIN code
-  > ```
+ ![image](../images/DiaconnG8/DiaconnG8_07.jpg)
 
 ## Pump status check and log synchronization
 
 - Once your pump is connected, click on the Bluetooth symbol to check the status and to synchronize logs.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_08.jpg
-  > :alt: Bluetooth status
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_08.jpg)
 
 ## Bluetooth Troubleshooting
 
@@ -62,35 +47,25 @@
 
 - Click on the 3 dots button on the top right.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_09.jpg
-  > :alt: Preferences menu
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_09.jpg)
 
 - Click on Exit.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_10.jpg
-  > :alt: Exit
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_10.jpg)
 
 ### Method 2) If the first method doesn’t work, disconnect Bluetooth and then reconnect.
 
 - Press and hold the Bluetooth button at the top for about 3 seconds.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_11.jpg
-  > :alt: Bluetooth button
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_11.jpg)
 
 - Click on the Setting button on the paired Diaconn G8 Insulin pump.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_12.jpg
-  > :alt: Settings button
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_12.jpg)
 
 - Unpair.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_13.jpg
-  > :alt: Unpair
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_13.jpg)
 
 - Repeat the Bluetooth pairing process for the pump (see above).
 
diff --git a/docs/CROWDIN/sk/Getting-Started/Screenshots.md b/docs/CROWDIN/sk/Getting-Started/Screenshots.md
index 32c5de46af60..e0086db06802 100644
--- a/docs/CROWDIN/sk/Getting-Started/Screenshots.md
+++ b/docs/CROWDIN/sk/Getting-Started/Screenshots.md
@@ -200,7 +200,7 @@ You need to find out why you get duplicate BGs:
 
 * **Light blue** line: zero-temp (predicted BG if temporary basal rate at 0% would be set)
    
-   Prediction line shows how the IOB trajectory line would change if the pump stopped all insulin delivery (0% TBR).
+   Prediction line shows how the BG trajectory line would change if the pump stopped all insulin delivery (0% TBR).
    
    *This line appears only when the [SMB](Preferences-advanced-meal-assist-ama-or-super-micro-bolus-smb) algorithm is used.*
 
diff --git a/docs/CROWDIN/sk/index.md b/docs/CROWDIN/sk/index.md
index e3276404fcf3..609f72399a00 100644
--- a/docs/CROWDIN/sk/index.md
+++ b/docs/CROWDIN/sk/index.md
@@ -77,7 +77,9 @@ Setting up the reporting server <./Installing-AndroidAPS/setting-up-the-reportin
 Building AAPS <./Installing-AndroidAPS/building-AAPS.md>
 Transferring and Installing AAPS <./Installing-AndroidAPS/Transferring-and-installing-AAPS.md>
 Setup Wizard<./Installing-AndroidAPS/setup-wizard.md>
-Change AAPS configuration<./Installing-AndroidAPS/change-configuration.md>
+Change AAPS configuration <./Installing-AndroidAPS/change-configuration.md>
+- Config Builder <./Configuration/Config-Builder.md>
+- Preferences <./Configuration/Preferences.md>
 Completing the objectives <./Usage/completing-the-objectives.md>
 ```
 
diff --git a/docs/CROWDIN/tr/Configuration/DiaconnG8.md b/docs/CROWDIN/tr/Configuration/DiaconnG8.md
index fb9457b74ec7..c03d2328c26c 100644
--- a/docs/CROWDIN/tr/Configuration/DiaconnG8.md
+++ b/docs/CROWDIN/tr/Configuration/DiaconnG8.md
@@ -2,57 +2,42 @@
 
 ## İnsülin Pompası Bluetooth Eşleştirme
 
-- Sol üst köşedeki hamburger menüsüne tıklayın.
+- Click on the hamburger menu in the top left corner.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_01.jpg
-  > :alt: Hamburger menü
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_01.jpg)
 
 - Konfigürasyon ayarlarına tıklayın.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_02.jpg
-  > :alt: Konfigürasyon ayarları
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_02.jpg)
 
 - Diaconn G8 Pompayı seçtikten sonra Ayarlar simgesine (dişli çark) tıklayın.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_03.jpg
-  > :alt: Ayarlar
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_03.jpg)
 
 - Pompa seçimi'ne tıklayın.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_04.jpg
-  > :alt: Pompa seçimi
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_04.jpg)
 
 - Listede model numarası görünen insülin pompanızın seçin.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_05.jpg
-  > :alt: Pompa eşleştirme
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_05.jpg)
 
 - Model numaranızı kontrol etmek için iki seçenek vardır:
 
-  > 1. Pompanın arkasındaki SN numarasının son 5 hanesi.
-  > 2. Pompa üzerinden O düğmesi > Bilgi > BLE > Son 5 basamak.
-  > 
-  > > `{image} ../images/DiaconnG8/DiaconnG8_06.jpg
-    :alt: model no kontrolü.`
+1. Pompanın arkasındaki SN numarasının son 5 hanesi.
+2. Pompa üzerinden O düğmesi > Bilgi > BLE > Son 5 basamak.
+
+![image](../images/DiaconnG8/DiaconnG8_06.jpg)
 
 - Pompanızı seçtiğinizde, pin kodunu soran bir pencere açılır. Bağlantıyı tamamlamak için pompanızda görüntülenen pin numarasını girin.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_07.jpg
-  > :alt: PIN kodu
-  > ```
+ ![image](../images/DiaconnG8/DiaconnG8_07.jpg)
 
 ## Pompa durum kontrolü ve günlük senkronizasyonu
 
 - Pompanız bağlandıktan sonra, durumu kontrol etmek ve günlükleri senkronize etmek için Bluetooth sembolüne tıklayın.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_08.jpg
-  > :alt: Bluetooth durumu
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_08.jpg)
 
 ## Bluetooth Sorun Giderme
 
@@ -62,35 +47,25 @@
 
 - Sağ üstteki 3 nokta butonuna tıklayın.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_09.jpg
-  > :alt: Tercihler menüsü
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_09.jpg)
 
 - Çıkış'a tıklayın.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_10.jpg
-  > :alt: Çıkış
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_10.jpg)
 
 ### Yöntem 2) İlk yöntem işe yaramazsa, Bluetooth bağlantısını kesin ve ardından yeniden bağlanın.
 
 - Üstteki Bluetooth düğmesini yaklaşık 3 saniye basılı tutun.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_11.jpg
-  > :alt: Bluetooth butonu
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_11.jpg)
 
 - Eşleştirilmiş Diaconn G8 İnsülin pompasındaki ayar butonuna tıklayın.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_12.jpg
-  > :alt: Ayar butonu
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_12.jpg)
 
 - Eşleştirmeyi kaldır.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_13.jpg
-  > :alt: Eşleştirmeyi kaldır
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_13.jpg)
 
 - Pompa için Bluetooth eşleştirme işlemini tekrarlayın (yukarıya bakın).
 
diff --git a/docs/CROWDIN/tr/Getting-Started/Screenshots.md b/docs/CROWDIN/tr/Getting-Started/Screenshots.md
index 089f40bcfd56..f13a3f58443b 100644
--- a/docs/CROWDIN/tr/Getting-Started/Screenshots.md
+++ b/docs/CROWDIN/tr/Getting-Started/Screenshots.md
@@ -200,7 +200,7 @@ Neden yinelenen KŞ verileri aldığınızı bulmanız gerekiyor:
 
 * **Açık mavi** çizgi: sıfır geçici (geçici bazal oranı %0 olarak ayarlandıysa, tahmini KŞ)
    
-   Tahmin çizgisi, pompa tüm insülin iletimini (%0 GBO) durdurursa Aktif İnsülin çizgisinin nasıl değişeceğini gösterir.
+   Prediction line shows how the BG trajectory line would change if the pump stopped all insulin delivery (0% TBR).
    
    *Bu satır yalnızca [ SMB ](preferences-veyvanced-meal-sist-ama-or-super-micro-bolus-smb) algoritması kullanıldığında görünür.*
 
diff --git a/docs/CROWDIN/tr/index.md b/docs/CROWDIN/tr/index.md
index 0d8396f7caa5..8c4f64257e66 100644
--- a/docs/CROWDIN/tr/index.md
+++ b/docs/CROWDIN/tr/index.md
@@ -77,7 +77,9 @@ Setting up the reporting server <./Installing-AndroidAPS/setting-up-the-reportin
 Building AAPS <./Installing-AndroidAPS/building-AAPS.md>
 Transferring and Installing AAPS <./Installing-AndroidAPS/Transferring-and-installing-AAPS.md>
 Setup Wizard<./Installing-AndroidAPS/setup-wizard.md>
-Change AAPS configuration<./Installing-AndroidAPS/change-configuration.md>
+Change AAPS configuration <./Installing-AndroidAPS/change-configuration.md>
+- Config Builder <./Configuration/Config-Builder.md>
+- Preferences <./Configuration/Preferences.md>
 Completing the objectives <./Usage/completing-the-objectives.md>
 ```
 
diff --git a/docs/CROWDIN/zh/Configuration/DiaconnG8.md b/docs/CROWDIN/zh/Configuration/DiaconnG8.md
index 16b256eef04b..4adb4de68db5 100644
--- a/docs/CROWDIN/zh/Configuration/DiaconnG8.md
+++ b/docs/CROWDIN/zh/Configuration/DiaconnG8.md
@@ -4,55 +4,40 @@
 
 - Click on the hamburger menu in the top left corner.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_01.jpg
-  > :alt: Hamburger menu
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_01.jpg)
 
 - Click on Config Builder.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_02.jpg
-  > :alt: Config builder
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_02.jpg)
 
 - After selecting the Diaconn G8 Pump click on the Settings icon (cog wheel).
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_03.jpg
-  > :alt: Settings
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_03.jpg)
 
 - Choose Selected pump.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_04.jpg
-  > :alt: Select pump
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_04.jpg)
 
 - Select your insulin pump’s model number once it appears in the list.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_05.jpg
-  > :alt: Pump pairing
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_05.jpg)
 
 - There are two options to check your model number:
 
-  > 1. The last 5 digits of the SN number on the back of the pump.
-  > 2. Click on O button > Information > BLE > Last 5 digits.
-  > 
-  > > `{image} ../images/DiaconnG8/DiaconnG8_06.jpg
-    :alt: check model no.`
+1. The last 5 digits of the SN number on the back of the pump.
+2. Click on O button > Information > BLE > Last 5 digits.
+
+![image](../images/DiaconnG8/DiaconnG8_06.jpg)
 
 - Once you select your pump, a window appears asking for a pin code. Enter the pin number displayed on your pump to complete the connection.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_07.jpg
-  > :alt: PIN code
-  > ```
+ ![image](../images/DiaconnG8/DiaconnG8_07.jpg)
 
 ## Pump status check and log synchronization
 
 - Once your pump is connected, click on the Bluetooth symbol to check the status and to synchronize logs.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_08.jpg
-  > :alt: Bluetooth status
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_08.jpg)
 
 ## Bluetooth Troubleshooting
 
@@ -62,35 +47,25 @@
 
 - Click on the 3 dots button on the top right.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_09.jpg
-  > :alt: Preferences menu
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_09.jpg)
 
 - Click on Exit.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_10.jpg
-  > :alt: Exit
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_10.jpg)
 
 ### Method 2) If the first method doesn’t work, disconnect Bluetooth and then reconnect.
 
 - Press and hold the Bluetooth button at the top for about 3 seconds.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_11.jpg
-  > :alt: Bluetooth button
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_11.jpg)
 
 - Click on the Setting button on the paired Diaconn G8 Insulin pump.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_12.jpg
-  > :alt: Settings button
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_12.jpg)
 
 - Unpair.
 
-  > ```{image} ../images/DiaconnG8/DiaconnG8_13.jpg
-  > :alt: Unpair
-  > ```
+![image](../images/DiaconnG8/DiaconnG8_13.jpg)
 
 - Repeat the Bluetooth pairing process for the pump (see above).
 
diff --git a/docs/CROWDIN/zh/Getting-Started/Screenshots.md b/docs/CROWDIN/zh/Getting-Started/Screenshots.md
index 32c5de46af60..e0086db06802 100644
--- a/docs/CROWDIN/zh/Getting-Started/Screenshots.md
+++ b/docs/CROWDIN/zh/Getting-Started/Screenshots.md
@@ -200,7 +200,7 @@ You need to find out why you get duplicate BGs:
 
 * **Light blue** line: zero-temp (predicted BG if temporary basal rate at 0% would be set)
    
-   Prediction line shows how the IOB trajectory line would change if the pump stopped all insulin delivery (0% TBR).
+   Prediction line shows how the BG trajectory line would change if the pump stopped all insulin delivery (0% TBR).
    
    *This line appears only when the [SMB](Preferences-advanced-meal-assist-ama-or-super-micro-bolus-smb) algorithm is used.*
 
diff --git a/docs/CROWDIN/zh/index.md b/docs/CROWDIN/zh/index.md
index 612cf3fab280..9445a23962ad 100644
--- a/docs/CROWDIN/zh/index.md
+++ b/docs/CROWDIN/zh/index.md
@@ -77,7 +77,9 @@ Setting up the reporting server <./Installing-AndroidAPS/setting-up-the-reportin
 Building AAPS <./Installing-AndroidAPS/building-AAPS.md>
 Transferring and Installing AAPS <./Installing-AndroidAPS/Transferring-and-installing-AAPS.md>
 Setup Wizard<./Installing-AndroidAPS/setup-wizard.md>
-Change AAPS configuration<./Installing-AndroidAPS/change-configuration.md>
+Change AAPS configuration <./Installing-AndroidAPS/change-configuration.md>
+- Config Builder <./Configuration/Config-Builder.md>
+- Preferences <./Configuration/Preferences.md>
 Completing the objectives <./Usage/completing-the-objectives.md>
 ```