Skip to content

Latest commit

 

History

History
136 lines (83 loc) · 9.01 KB

README.md

File metadata and controls

136 lines (83 loc) · 9.01 KB

PULP DSP: Digital Signal Processing on Parallel Ultra Low Power Platform

Introduction

This repository contains DSP functions for PULP platform.

It contains the kernel functions for different ISA extensions of RISC-V being developed for PULP platforms (RV32IM, XPULPV2, etc.).

Currently it's being developed and tested on Mr.Wolf (fabric controller (FC) with IBEX (previous zero-riscy), i.e. RV32IM, and cluster with 8 RISCY cores, i.e. RV32IM with XPULPV2 extentions.).

Additionally, it supports the pulp-open and can be used with GWT GAP8.

Some of the functions are very optimized, while others are WIP. Contributions are welcome!

Structure of the repository

This repository contains:

  • src folder contains the source codes. In the folder you can find subfolders with different kinds of functions (e.g. BasicMathFunctions, StatisticsFunctions, etc.). In each subfolder you find the glue codes and a folder called kernel which contains the kernels for different ISA extensions. The glue codes are used for namely "gluing" the kernels, for example for checking the ISA extension of the calling platform (in the case of Mr. Wolf, it checks if it's FC or CLUSTER calling the function, in case of FC the kernel function for RV32IM is called, otherwise the kernel function for XPULPV2 extension is called. The glue code can be changed and adapted to the specific chip.

  • include folder with necessary header files. Especially the main header file plp_math.h has to be included in the codes which want to use this library. Moreover, the rtos_hal.h provides an hardware abstraction layer (HAL) for interfacing both the 'old' pulp-sdk (v1 branch, which supports Mr. Wolf and older chips) and the 'new' pulp-sdk (main branch, which supports newer chips and GAP8). Note: in the same header file it's possible to define macros (e.g. LOOPUNROLL if you want to take into consideration the option of unrolling or not unrolling the loops).

  • Makefile for compiling the library. Add your glue codes and kernel functions to be compiled.

  • test folder contains the testing setup used during the development of the library. For more details please read the README file in the folder.

  • docs folder contains the configurations for building documentation for the library.

Installation and usage

First of all, in order to install and use the library, you have to install the pulp-sdk. You can follow the instructions here.

Note that for Mr. Wolf and older chips you need to use the 'old' sdk on the v1 branch. While for newer chips and GAP8 use the 'new' sdk on the main branch.

Configure the sdk according to the chip and the platform you want to use (for example with the 'old' sdk source configs/wolfe.sh and source configs/platform-board.sh). Do not forget to source the sourceme.sh everytime you open a new terminal to set up the environmental variables (e.g. PULP_SDK_HOME) needed to run pulp projects. For more updated instructions, please refer to the pulp-sdk page.

Once you are done with the pulp-sdk setup, you can clone this repository, enter the pulp-dsp folder.

With the pulp-sdk on the v1 branch

To compile and install the library, do

make clean header all install

To use the library add PULP_LDFLAGS += -lplpdsp in the Makefile of your project and don't forget to include the necessary header files, e.g., plp_math.h, in your codes. Link also the math library using -lm.

If you add or modify the source codes and want to rebuild the library without recompiling unmodified files, do

make header build install

With the pulp-sdk on the main branch

You need to enable the PMSIS mode:

export PULP_RTOS=pmsis

To compile and install the library, do

make build-lib
make install-lib

Documentation

The documentation is built from the latest master and hosted at github pages: https://pulp-platform.github.io/pulp-dsp, using MkDocs-Material and Doxybook2.

You can also generate the reference manual by yourself by going to the docs folder and doing

doxygen Doxyfile

It creates the reference manual and you can browse it by opening html/index.html using a browser.

To add documentations use @defgroup, @ingroup, @addtogroup, etc. Please refer to plp_math.h and the source codes src/BasicMathFunctions/plp_dot_prod_i32.c and src/BasicMathFunctions/kernels/plp_dot_prod_i32s_rv32im.c as examples.

Test framework and benchmarks

Under the test folder you can test the functions and benchmark their performance by collecting number of cycles, instructions, instructions per cycle (i/c), instruction cache misses (imiss), load stalls (ld_stall), TCDM contentions (tcdm_cont), number of operations (ops, mostly counted as multiply-and-accumulate operations), and operations per cycle (ops/c).

An example on the 1D convolution function is shown below, run on gvsoc of Mr. Wolf. The device ibex means that the basic RV32IM ISA is used, while riscy means that the XPULPv2 ISA extensions are used. We can reach up to 11.739 MACs/cycle using the 8 cores of Mr. Wolf!

function device dimension cycles insn i/c imiss ld_stall tcdm_cont ops ops/c
plp_conv_i32 ibex len_a=512; len_b=512 1649017 868026 0.526 0 447594 0 523776 0.318
plp_conv_i32 ibex len_a=512; len_b=1024 3176006 1654308 0.521 0 880571 0 785920 0.247
plp_conv_i16 ibex len_a=512; len_b=512 1659535 870761 0.525 0 454502 0 523776 0.316
plp_conv_i16 ibex len_a=512; len_b=1024 3213505 1669232 0.519 0 896778 0 785920 0.245
plp_conv_i8 ibex len_a=512; len_b=512 1639099 850447 0.519 0 454457 0 523776 0.320
plp_conv_i8 ibex len_a=512; len_b=1024 3174745 1630530 0.514 0 896757 0 785920 0.248
plp_conv_i32 riscy len_a=512; len_b=512 567109 541968 0.956 1111 52 0 523776 0.924
plp_conv_i32 riscy len_a=512; len_b=1024 1028088 998842 0.972 1430 27 0 785920 0.764
plp_conv_i32_parallel riscy len_a=512; len_b=512 72510 68677 0.947 880 25 907 523776 7.224
plp_conv_i32_parallel riscy len_a=512; len_b=1024 131819 126403 0.959 891 25 1603 785920 5.962
plp_conv_i16 riscy len_a=512; len_b=512 489358 457920 0.936 1254 49 0 523776 1.070
plp_conv_i16 riscy len_a=512; len_b=1024 892258 846771 0.949 1331 25 0 785920 0.881
plp_conv_i16_parallel riscy len_a=512; len_b=512 63512 58444 0.920 814 25 1052 523776 8.247
plp_conv_i16_parallel riscy len_a=512; len_b=1024 115545 109386 0.947 869 25 1595 785920 6.802
plp_conv_i8 riscy len_a=512; len_b=512 336855 291150 0.864 1551 19 0 523776 1.555
plp_conv_i8 riscy len_a=512; len_b=1024 575868 503993 0.875 1210 11 0 785920 1.365
plp_conv_i8_parallel riscy len_a=512; len_b=512 44618 37599 0.843 880 23 1211 523776 11.739
plp_conv_i8_parallel riscy len_a=512; len_b=1024 80015 68701 0.859 891 23 2304 785920 9.822

To contribute

The library contains many optimized functions, but there are still many of them to be optimized. Contributions are very welcome and are accepted under Apache v2.0.

If you want to contribute, fork the repository and issue pull requests.

For each function you develop, note the following:

  • Include its corresponding test framework under the test folder or adapt it if it already exists;

  • Update the documentation;

  • Use clang-format to format the code;

  • Make sure that all tests pass;

  • Maintain the compatibility for both 'old' and 'new' sdk (see rtos_hal.h).

More details can be found in HACKATHON.md.

License and Attribution

All source code is released under Apache v2.0 license unless noted otherwise, please refer to the LICENSE file for details.

We are inspired by CMSIS-DSP (CMSIS_5 licensed under Apache v2.0) and partially adapted its structure and codes.