Confirmed - Works on the Korg Triton series #169
manpaz
started this conversation in
Show and tell
Replies: 0 comments
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
-
Hello,
I'd like to confirm that the BlueSCSI works on the Korg Triton series, although I only have access to the Korg Triton-Rack, the board to add the SCSI capabilities seems to be pretty much the same for all the series, the EXB-SCSI (KLM-2087) based on Fujitsu MB86604L.
Tested with a BlueSCSI 1.1a DB25
Based on the instructions of the Parameter Guide, I created 4 drives of 4GB each, on the LUN0 and assigned them to the SCSI IDs 1, 2, 3, and 4 to avoid conflicts with the ID 0 which is usually reserved for communications with external computers, although, I couldn't find anything on the documentation about using the SCSI port for communications or anything else other than media/disks attachment, thus there is no mention as well of any ID reserved for the Triton's SCSI port, however, there is the assumption that the Triton uses the ID 7 because there is suggestion to use the IDs 0 to 6 for all the external devices.
Technically, one can go with up to 8 IDs, minus the ID 7 which is taken by the Triton, then, there are 7 IDs still available, however, for the purpose of testing, and because I'm using a 16GB SD, I only created 4 drives.
The procedure used is as follows:
Hope that helps others looking for a solution for their Korg Triton.
Thank you!
Beta Was this translation helpful? Give feedback.
All reactions