Skip to content

Latest commit

 

History

History
50 lines (36 loc) · 978 Bytes

README-RPI.md

File metadata and controls

50 lines (36 loc) · 978 Bytes
Raw

Build PyAER on Raspberry Pi

This is a working build instruction on Raspberry Pi 3B with Raspbian Stretch.

Install dependencies

sudo apt-get install build-essential cmake pkg-config libusb-1.0-0-dev
sudo apt-get install automake bison libpcre3-dev

Install libcaer

The libcaer can be installed as follows

git clone https://gitlab.com/inivation/dv/libcaer.git
cd libcaer
cmake -DCMAKE_INSTALL_PREFIX=/usr .
make -j4
sudo make install

Install swig

You can compile swig with the following steps:

git clone https://github.com/duguyue100/swig
cd swig
./autogen.sh
# choose one of the configure settings
./configure --with-python=$(command -v python) --without-python2 --without-pcre  # for python 3
make -j4
sudo make install

Compile pyaer

Compile pyaer with the following steps:

git clone https://github.com/duguyue100/pyaer
sudo make install

Contacts

Yuhuang Hu
Email: duguyue100@gmail.com