Skip to content

Releases: SoftFever/OrcaSlicer

v2.2.0-beta2

27 Sep 12:22
Compare
Choose a tag to compare
v2.2.0-beta2 Pre-release
Pre-release

This is Orca Slicer v2.2.0 Beta2 release.
This version introduces some new features and fixes several bugs found in Beta 1.

Known issues: The prime tower might act a bit oddly in this build when ramming is disabled. For more details, check out the ongoing discussions here: #6894

What's Changed

  • Add support for textured cool plate by @SoftFever in #6860
    Orca now supports textured cool plates like BigTree's CryoGrip Textured Coating Steel Sheet. This allows you to easily adjust the z-offset for various types of cool plates.

    textured.cool.plate.mp4
  • Improve fuzzy skin with modifier by @Noisyfox in #6759
    Previously, when we applied a modifier to add fuzzy skin to specific areas, the algorithm would split these regions into multiple parts, creating unwanted perimeters and islands. Now, Orca ensures continuous perimeters and infills while adding fuzzy skin only to the specified areas. This improvement enhances print quality and reduces print time.
    image
    image

  • Feature/move plate to the front by @Azio-Pantheon in #6262
    Orca now lets you move any plate to the front, which is especially handy when you have multiple plates and need to rearrange them. Just a heads-up: you'll need a bit of Sokoban game skill! 😉
    image

  • Check and use data_dir folder if exists under application path by @SoftFever in #6780

    If there's a folder named data_dir under the application's path, Orca will use it as the data directory.
    image

  • support downloading from makerworld on Mac . by @SoftFever in #6867

  • Fix a bug that wipe tower has missing extrusions when ramming is disabled by @SoftFever in #6894

  • Fix crash when first layer is empty by @Noisyfox in #6817

  • Fix small top/bottom solid infill filtering by @Noisyfox in #6794

  • Fixed Make Overhangs Printable and Multicolor Printing conflict by @GarlicDebug in #6896

  • FIX:open or replace 3MF file case insensitive by @Noisyfox in #6802

  • Fix fuzzy skin randomness for Arachne wall generator by @Noisyfox in #6770

  • Arachne "one top wall" fix and refactor by @vovodroid in #6236

  • Fix input box widths in calibration UI by @vvuk in #6587

  • Disable "cut to parts" when dovetail is selected. by @Noisyfox in #6891

  • Spanish translation update by @tadeu2 in #6779

  • Artillery Resources Profiles Update by @artillery3dlab in #6754

  • Adding Co Print profiles by @coprint in #6791

  • Added Russian translation for missing phrases (2.1.1) by @andrey-helldar in #6778

  • New French translations and fixed c-boost format in pot/po files by @bistory in #6803

  • Update Ender-3 V2 Neo start G-Code to include mesh leveling by @nobu-sh in #6832

  • Qidi.json by @HYzd766 in #6841

  • Fix not being able to create new filaments for Dremel 3D45, 3D40, & 3D20 by @cochcoder in #6837

  • Fix invalid START_PRINT in unofficial Rat Rig profiles. by @miklschmidt in #6838

  • add new de translations for 2.2.0 beta by @hliebscher in #6861

  • Disable Arc Fitting for FlashForge by @inkeliz in #6855

  • add new de for new features by @hliebscher in #6873

  • Fix building errors when precompiled header support is disabled by @schiele in #6879

  • Fix a bed type regression by @SoftFever in #6893

  • Followup to clones auto arrange: use current plate by @vovodroid in #6373

  • Update TURKISH translations by @GlauTechCo in #6882

  • Added new french strings by @bistory in #6895

OrcaSlicer V2.2.0 Beta Release

14 Sep 04:45
603e3e7
Compare
Choose a tag to compare
Pre-release

This is OrcaSlicer V2.2.0 beta release.

🚨🚨🚨Important Security Alert🚨🚨🚨

Please be aware that "orcaslicer.net" is NOT an official website for OrcaSlicer and may be potentially malicious. This site appears to use AI-generated content, lacking genuine context, and seems to exist solely to profit from advertisements. Worse, it may redirect download links to harmful sources. For your safety, avoid downloading OrcaSlicer from this site as the links may be compromised.

The only official platforms for OrcaSlicer are our GitHub project page and the official Discord channel .

We deeply value our OrcaSlicer community and appreciate all the social groups that support us. However, it is crucial to address the risk posed by any group that falsely claims to be official or misleads its members. If you encounter such a group or are part of one, please assist by encouraging the group owner to add a clear disclaimer or by alerting its members.

Thank you for your vigilance and support in keeping our community safe!

What's Changed

  • Orca Slicer now support multi-tool printer by @SoftFever in #6087
    As requested by many, Orca Slicer now supports multi-tool printers!
    Users can define multi-tool(tool changer or IDEX) printers in Orca Slicer.
    Features supported:

    1. Assign extruders based on features.
      Screenshot 2024-09-14 at 11 47 55 AM.
    2. Ooze prevention, both Idle temperature and Temperature variation approach are supported
    3. Preheat next tool automatically based on time estimation. Support all firmwares(Prusa/Klipper/Marlin/etc)
    4. Supports mixing different line widths in a single print with multiple tools. This allows our printer to print with not only different materials/colors, but also control the line width for specific parts, to improve quality, strength, and speed using different nozzles with varying diameters.
      For example, we can use one 0.4mm nozzle and one 0.8mm nozzle in one print; the line width will automatically adjust based on a percentage of the nozzle diameter (you will need to define the line width with a percentage in the settings).
      image

    Note Two new tool changer printer profiles have been added into Orca: Generic ToolChanger based on Klipper and Prusa XL 5T. Multi tool printer need to setup the Custom g-codes properly, please ref to these two profiles if you want to define your own.

    multi-tool.mp4

    image

    ❤️ Multi tool printer support feature is based on Prusa Slicer's multi tool printer support. Thanks to Prusa team for their open-source work and sharing it with the community!

  • New improved flow rate calibration: YOLO mode by @SoftFever in #6479

    YOLO.mp4

    This new mode introduces a single-pass flow calibration that should cover 95% of cases, provided the printer's extruder has its e-steps/rotation-distance calibrated. Unlike the previous flow rate calibration, this new YOLO (You Only Look Once) calibration only requires print the test once.
    Please pay attention that mode employs a linear method to adjust the flow rate. For a -0.03 block, the adjusted flow rate is calculated as filament_flow_rate - 0.03.
    Two versions of the YOLO benchmark are provided: a default (recommended) and a perfectionist version. The default YOLO benchmark features a calibration range of [-0.05, +0.05] with an adjustment step size of 0.01. In contrast, the perfectionist version offers a smaller adjustment range of [-0.04, 0.035] with an even smaller step size of 0.005.

    Detailed tutorial will be updated soon in WIKI

  • Enhancement: Adaptive Pressure advance by @igiannakas in #5609

    We're excited to introduce another fantastic feature, implemented by @igiannakas, specifically designed for perfectionist users! The "Adaptive Pressure Advance" enhancement in OrcaSlicer now offers an automatic adjustment feature for pressure advance settings based on real-time flow rate and print acceleration.
    This innovative feature helps improve print quality by compensating for varying extrusion dynamics during different speeds. As a result, it enables smoother transitions and more consistent layer deposition. The adaptive pressure advance also enhances prints by adjusting the pressure in the nozzle more dynamically, reducing artifacts such as blobs or gaps.

    Screenshot 2024-09-13 at 10 58 41 PM image courtesy of @igiannakas

  • Port of Cura's multi-material interlocking by @Noisyfox in #5775
    Remember UltiMaker Cura's awesome Unlock true multi-material printing with UltiMaker Cura 5.3? This innovative new feature unlock the full potential of you multi-tool printer!
    Thanks to @Noisyfox, this feature has now been ported to Orca Slicer!
    interlocking

    ❤️ I'd like to extend our gratitude to the Ultimaker Cura team for their relentless innovation and commitment to sharing their work with the community

  • Better support for MMU devices with filament cutter(e.g. ERCF v2 and any MMU with a cutter like Filametrix) by @SoftFever in #6241

    flush_length variable is now provide correct value based on the flush matrix set by the user.
    pesudo code in Change filament gcode:

    ...
    T1 
    ; Park head to the purging location
    G1 X0 Y-5 F12000
    ; Purge certain amount of filament into waste bin
    G1 E[flush_length] F600
    ...
    
    
  • Support per object skirt and draft shield. by @vovodroid in #6487

    per-object.skirt.and.draftshield.mp4
  • Orca Slicer now deprecate overhang_speed_classic option, and slowdown_for_curled_perimeters option are enabled by default now. This should improve the print quality for overhangs.

  • Improve rendering performace when in g-code preview mode when color scheme is set to "Filament" or "Speed" by @Azio-Pantheon in #6223

  • Combined infill max layer height (optional) parameter by @igiannakas in #6401

  • Improvements in Inner Outer Inner wall ordering logic by @igiannakas in #6138

  • Improve overhang slowdown granularity & line segmentation handling by @igiannakas in #5996

  • Adding pellet printer suppor to OrcaSlicer by @vipulrajan in #4836

  • Extrusion Rate Smoothing: Round speed values to prevent needless & trivial speed fluctuations by @igiannakas in #5911

  • Bug fix: Avoid crossing walls feature removes some retraction wipes by @igiannakas in #6518

  • Duplicate Current Plate With Objects (Second PR) by @eoyilmaz in #6710

  • Add travel_slope option by @vovodroid in #5873

  • Restore nozzle override fix by @anselor in #5900

  • Make document icons comply with macOS design guidelines by @Ferbez in #5897

  • 06-27 Add Chuanying x1 printer profiles by @Bai825 in #5888

  • Qidi profiles tweaks: update pressure_advance for 0.4mm nozzles by @HYzd766 in #5887

  • Documentation updates. Adding some developer centric docs by @vipulrajan in #4807

  • build on systems with libwebkit2gtk-4.1 by @buzzhuzz in #5135

  • support Clear Linux OS by @schiele in #5652

  • add missing includes by @schiele in #5691

  • Update Korean Translation (v2.1.1) by @ElectricalBoy in #5918

  • Mark unsaved project title with * by @vovodroid in #5910

  • VS2022 Win10 build fix by @vovodroid in #5806

  • add new de for v2.1.1 by @hliebscher in #5940

  • update Polish translations ( 2.1.1 ) by @KrisMorr in #5948

  • more missing includes by @schiele in #5930

  • update Ukrianian translations ( 2.1.1 ) by @kybarg in #5956

  • Disable small area flow compensation on first layer (Fixes #4617) by @TheSlashEffect in #5838

  • Allow variable temperatures with the Tronxy X5SA 400 by @cochcoder in #5752

  • CI: Build with ubuntu-24.04 by @ElectricalBoy in #5919
    ...

Read more

OrcaSlicer Nightly Builds

02 Aug 16:53
d22cd9c
Compare
Choose a tag to compare
Pre-release

Welcome to the Nightly Build Release Page for Orca Slicer!

What is a Nightly Build?

Nightly builds are the latest versions of Orca Slicer, automatically compiled after every new commit to the main branch. This means that each build incorporates the most recent changes and improvements. While these builds offer a glimpse into the ongoing development of Orca Slicer, keep in mind that they are still works in progress and may contain bugs or unstable features.

Download Instructions:

  1. Select the version that corresponds to your operating system.
  2. Download and install the build.
  3. Dive into the newest features and improvements!

Please Note:

  • Nightly builds are developmental and may contain bugs.
  • Your feedback is crucial. Please report any issues or suggestions on our GitHub page.

Thank You for Supporting Orca Slicer!

Your active participation and feedback are key to our continuous improvement. Enjoy exploring the forefront of FDM printing technology!

OrcaSlicer V2.1.1 Official Release

26 Jun 16:13
Compare
Choose a tag to compare

This is a hotfix for OrcaSlicer 2.1.0.
It fixes several bugs found in version 2.1.0, so updating is recommended.
It also includes some new profiles and translation updates.

What's Changed

Bug fix

  • Fixed a regression bug where small area flow compensation was not working in v2.1.0 @SoftFever in #5844

    image

  • Fixed a bug where slicing results were sometimes incorrect for multiple material models on Mac machines. by @SoftFever in #5856

    image

  • Fixed a bug related to the mirror operation by @Noisyfox in #5827

    mirror_issue

  • Fixed a regression bug that caused failures when uploading large gcode files to PrusaLink-connected printers by @Noisyfox in #5843

Printer profils

Translation updates

OrcaSlicer V2.1.0 Official Release

21 Jun 14:38
5c9b82d
Compare
Choose a tag to compare

This is the official release of OrcaSlicer V2.1.0

This update includes minor fixes and new translations.
For a detailed list of all the new features, please refer to the release notes for v2.1.0 Beta and V2.1.0 RC

What's Changed

  • Improved fuzzy skin by @SeaRyanC in #5682
    The enhancements introduced in OrcaSlicer V2.1.0 RC were not properly highlighted earlier, so I'd like to reintroduce them now. Previously, the fuzzy skin displayed subtle patterns along the Z direction. With the latest improvements, the fuzziness has been made truly uniform and random.
    image
    image courtesy of @cowc1um
  • Tweak the UI of Web Link Association in Preferences by @Ocraftyone in #5791
  • Added catalan language to resources\web\data\text.js by @davidjuanesb in #5727
  • add new german translations by @hliebscher in #5729
  • New French translations for 2.1.0-rc by @bistory in #5734
  • Update TURKISH translations by @olcayoren in #5735
  • Minor improvements & fixes for Ender-3 V3 KE by @cochcoder in #5743
  • update Polish translations ( 2.1.0-rc ) by @KrisMorr in #5753
  • Fix Snapmaker profiles by @macdylan in #5763
  • Update Korean (ko) Translation by @ElectricalBoy in #5764
  • Spanish translation RC 2.1.0 by @tadeu2 in #5779
  • Update Flyingbear profiles: fix startcode by @FlyingbearOfficial in #5784
  • Update Infimech profiles: fix printstart gcode by @InfimechOfficial in #5787
  • Various improvements to SimplyPrint integration by @Noisyfox in #4831
  • Fix Spanish translation strings by @tadeu2 in #5792

Support

I have been spending almost all my spare time maintaining this open source project.
If you appreciate my work, please consider buying me a coffee.
Your support is greatly appreciated! :)

ko-fi
Or
PayPal

OrcaSlicer V2.1.0 Release Candidate

17 Jun 08:04
Compare
Choose a tag to compare
Pre-release

This is the OrcaSlicer V2.1.0 RC release.

This update introduces some new features and fixes some bugs found in the v2.1.0 Beta

What's Changed

  • Allow opt-out outer walls when adjusting speed for "slow-down for layer cooling" by @igiannakas in #5148
    outerwall

    This creative slowdown approach enhances printing quality by reducing layer inconsistency due to varying print speeds. It specifically improves the quality of gloss-like materials by ensuring consistent outer wall print speeds. Variations in speed can impact the filament's melting time, affecting the shine of the outer walls.
    Untitled
    PS: @igiannakas is an active contributor to the Orca Slicer project—big shout out to him for his contribution! He is also working on a new Pressure Advance feature. Please check it out here: #5609. More testing data is needed for this feature

  • Thumbnails feature enhancement. by @SoftFever in #5555
    Support for generating various size/format combinations has been added. Users can now specify thumbnails in multiple configurations, such as 380x380/COLPIC, 210x210/COLPIC, and 380x380/PNG. This feature is particularly useful for printers that utilize multiple thumbnails for on-device screens and web interfaces, including models like the Qidi X3 series, Prusa MK4, MINI, Elegoo Neptune 4, and others. This is feature is loosely based on PrusaSlicer's work

  • Better 3D navigator by @Noisyfox in #5620

    The viewcube now looks better :)
    image

  • Take filament flow ratio into account when displaying flow value in gcode legend by @SoftFever in #5628
    Orca now accounts for the "Flow Ratio" value specified in filament settings when displaying flow for each extrusion in the G-code legend. Note: this only affects gcode preview
    image

  • fix a regression that thumbnail was not rendered properly for delta printers(#5525) by @SoftFever

  • Fixed an regression bugs that tab's texts were cropped in high DPI by @SoftFever

  • Fixed an bug that plate name was not used in some cases(#5556) by @SoftFever

  • Fix an issue that Bambu printer camera is not prompted to register due to the Bambu's registry path changes(#5554) by @SoftFever

  • Potential fix for other layers bed temperature not applied by @igiannakas in #5546

  • Fix issue that skip object won't trigger filament change when print-by-object is used by @Noisyfox in #5576

  • Allow Cmd-Shift-M to bring up 3dConnexion Spacemouse Dialog (EXCEPT on "Home" sub-screen) by @SuperTango in #5598

  • Fixed an issue that small_area_infill_compensation_model was initialized even it's not used(#5550) by @SoftFever

  • Fix time cost not being considered in total cost by @cochcoder in #5698

  • fix url protocol integration under linux by @buzzhuzz in #5535

  • Fixed a minor bug where the maximum volumetric speed cap was slightly… by @SoftFever in #5629

Misc


Support

I have been spending almost all my spare time maintaining this open source project.
If you appreciate my work, please consider buying me a coffee.
Your support is greatly appreciated! :)

ko-fi
Or
PayPal

OrcaSlicer V2.1.0 Beta Release

31 May 12:29
9b7b11e
Compare
Choose a tag to compare
Pre-release

This is OrcaSlicer V2.1.0 beta release.

What's Changed

  • Orca Slicer now features brand-new icons, thanks to @yw4z in #4368
    These icons are designed to be more consistent, modern, and pixel-perfect, offering better color contrast. They align seamlessly with the new design of Orca Slicer. A big thanks to @yw4z for these new icons and numerous UI improvements!
    image

  • Orca Slicer now support open/import model from Prinables.com/Thingiverse.com/makerworld.com directly by @SoftFever and @Ocraftyone (#5486, #5416, #3823)
    No more manual downloads! You can now open models directly from these sites, and Orca Slicer will automatically import them for you.

    printables
    thingiverse
    mw

    You can enable this feature in the Preferences dialog.
    Please note that this feature is currently available only for Windows.

image

  • Infill direction enhancements by @SoftFever in #5267
    With the new enhancements, Orca Slicer now allows users to set sparse and solid infill directions independently. Users can also disable solid infill direction rotation, which is particularly useful when printing with transparent materials.

    infill.direction.mp4
  • Port new sparse infill pattern Cross Hatch and optimization by @SoftFever in #5495

    In this release, a new infill pattern called CrossHatch has been introduced into Orca(thanks to BambuStudio). This pattern is similar to Gyroid and the new 3D HoneyComb introduced in OrcaSlicer 2.0 RC but offers even faster printing speeds. Orca has further optimized this infill pattern to enhance its performance at low infill densities.

    Before:
    image

    After:
    image

  • improve seam performance by @SoftFever in #5436
    image
    image

  • Support larger printer by @SoftFever in #5320
    Orca Slicer previousely only support printer bed sizes smaller than 2147mm x 2147mm due to the limitations of the 32-bit data type.
    This limitation also applies to the maximum number of platers you can create for a project.
    The total width/length of all the plates cannot exceed this limit.
    Orca Slicer now support sizes as large as desired.
    For convenience, the limit is currently set to 214m x 214m x 214m.
    SuperSlicer is referenced for some changes.
    image

  • ESP3D printer connection for wireless printing by @PreyK in #5399
    Added ESP3D support for wireless printer connection to be able to send gcode & start printing directly from the slicer on printers with ESP3D module.
    image

  • fix wrong overhang slowdown value by @SoftFever in #4940

    Fixed a bug that overhang slowdown may slowdown too much in some cases.
    before, it slowed down to 4 mm/s despite we had minimal speed to 10:

    image

    after:

    image

  • SEMM: Introduced parameter to control the maximum speed used for purging in the purge tower by @igiannakas in #5304
    Previousely the speed limit is set to 90mm/sec which works well; however speed gains can be made by increasing this if the printer is able to bridge at higher speeds in the wipe tower.
    A max speed limit has been introduced for the purge tower. The existing, as is limits of volumetric flow for the filament and sparse infill speeds are respected. Same for the ramping up of purge speed up to the limit.

  • Adjustable infill wall overlap for top and bottom surfaces by @igiannakas in #4832
    This new option allows for independent adjustment of the infill/wall overlap for internal solid and sparse infill and top and bottom surfaces.

  • Touchpad-friently 3d navigation by @buzzhuzz in #4598
    Implement FreeCAD-inspired touchpad navigation mode.
    This mode makes 3d model inspection easier for devices with touchpad as the only pointer device.
    Controls:
    Shift+move: panning
    Alt+move: rotation

    nav-touchpad2.mp4
  • Orca Slicer default parameter tweaks by @SoftFever in #5406
    Some parameters are tweaked to improve the print quality and speed for all printers
    Gap fill are now disabled by default
    top_surface_pattern are not default to Monotonic Line
    Sparse infill pattern are now default to Cross hatch
    etc

  • Fixed a bug that top surface was mistaken as bridge in some cases by @SoftFever in #4678

    image

  • Precise Z Height

    image
    When enabled, this option ensures the accurate Z height of the model after slicing, even if the model height is not a multiple of the layer height.
    For example, slicing a 20mm x 20mm x 20.1mm cube with a layer height of 0.2mm would typically result in a final height of 20.2mm due to the layer height increments. By enabling this parameter, the layer height of the last five layers is adjusted so that the final sliced height matches the actual object height, resulting in an accurate 20.1mm (as shown in the picture). This feature is ported from BambuStudio.

  • Support Multi-device Management for Bambu printers(ported from BambuStudio)

  • Reducing purge through retracting filament for Bambu printers with AMS (port from BambuStudio)

  • Hide revert and delete preset buttons while search box focused by @yw4z in #5253

  • Removes check to disable nozzle override. by @anselor in #5459

  • Add z offset to pressure advance calibration (line and pattern) by @GrannyShifting in #4434

  • Lowering wipe tower margin by @vgdh in #4661

  • gui: reverse mouse zoom option (#4668) by @buzzhuzz in #4677

  • Fix go-to-layer dialog in gcode preview by @buzzhuzz in #4816

  • Add an option to allow user disable printer configuration by @SoftFever in #4930

  • Display filament labels in "change filament" context menus by @javawizard in #4921

  • Do layer height recognition on G3 moves as well by @Noisyfox in #4843

  • gui: fix zoom-to-mouse by @buzzhuzz in #4844

  • ENH: restore single instance by @noobydp in #4810

  • Reload All and Project Path by @chshkhr in #4903

  • Fix wipe tower not showing purged filament volume for non BBL SEMM by @igiannakas in #5223

  • Fix bed mesh algorithm for 3 point bicubic algorightm by @igiannakas in #5296

  • Close Variable layer height gizmo when other toolbar buttons clicked by @yw4z in #5255

  • Spanish translation fixes and improves by @tadeu2 in #4826

  • Russian translation update by @AndylgTom in #4782

  • Create pull_request_template.md by @SoftFever in #4856

  • Fix model load in debug build by @buzzhuzz in #4656

  • Fix segmentation fault when running CLI by @asokawotulo in #4702

  • Update Polish translation by @KrisMorr in #4799

  • fix typo and new features in DE language file by @hliebscher in #4881

  • MagicMaker Apply to join by @magicmaker3 in #4895

  • Add Kingroon KP3S 3.0 by @vgdh in #4902

  • Update OrcaSlicer_tr.po - TURK...

Read more

OrcaSlicer V2.0.0 Official Release

30 Mar 07:33
a187356
Compare
Choose a tag to compare

This is the OrcaSlicer V2.0.0 Official release.

This update introduces some enhancements and fixes several bugs.

For the complete list of new features introduced in Orca Slicer v2.0, please visit the OrcaSlicer V2.0.0 Beta Release Note and the OrcaSlicer V2.0.0 RC Release Note

What's Changed

  • Add overhang threshold for scarf joint seam by @SoftFever in #4725

    This is the latest effort in the ongoing improvement of the scarf joint seam. This new feature introduces an overhang threshold for the scarf joint seam, allowing users to set a threshold for the overhang angle to prevent the application of the scarf joint seam. This improvement is based on the observation that the scarf joint seam, in general, doesn't play well with steep overhangs.

    image
    Meanwhile, the 'Scarf joint flow ratio' option has been moved to dev mode only, as its utility remains unclear based on testing results. Thanks to Adam (@psiberfunk) for the testing and feedback. You can enable dev mode to use this feature.

  • Fix issue that print host and webui settings are not properly reset by @Noisyfox in #4734

  • Fix 3rd party login issue on macOS by @Noisyfox in #4739

  • gui: fix media eject on linux (#4700) by @buzzhuzz in #4701

  • Fixes #2992 - emboss numbers for 290-305 by @jamincollins in #4742

Profiles:

Translations:


Support

If you appreciate my work and would like to support me, consider buying me a coffee.
Your support is greatly appreciated! :)
ko-fi

OrcaSlicer V2.0.0 RC Release

24 Mar 00:53
Compare
Choose a tag to compare
Pre-release

This is the OrcaSlicer V2.0.0 RC release.

This update introduces some new features and fixes some bugs found in the V2.0.0 Beta.

What's Changed

  • Rewriten 3D Honeycomb infill by @gringer in #4425

    Are you ready to embrace your new favorite infill pattern? Allow me to introduce the revamped 3D Honeycomb infill. The current 3D Honeycomb infill pattern includes many bridges, making it less than ideal for high-speed printing and resulting in reduced strength. However, the improved 3D Honeycomb significantly reduces bridging, providing better strength and print quality. It offers similar strength to Gyroid infill but prints faster, thanks to requiring fewer direction changes.

    @gringer is the original author of the 3D Honeycomb implementation in Slic3r too(and hence in OrcaSlicer/PrusaSlicer/SuperSlicer/BambuStudio/etc...)
    bridge_fix_animation

    My stress testing shows that the new 3D Honeycomb infill can handle fast printing (200mm/s) without breaking a sweat.
    The following test was performed on a Prusa MK4 printer:
    Actual infill print speed: 200mm/s
    Filament: PETG
    Infill pattern: new 3D Honeycomb

    image

  • Tweak the home page in OrcaSlicer by @SoftFever in #4602

    1. Add a new preference option to explicitly and easily enable/disable the Bambu network plugin.
    2. Show/hide the user login panel in the Home tab automatically according to the new option. This should give users who don't use Bambu machines or accounts a clean startup interface.
      login panel
  • Tweak OrcaSlicer log by @SoftFever

    1. set default logging level to warning and make it configurable in .conf file
    2. deprecate severity_level, use log_severity_level config key
    3. remove encrytped bbl debug_network log file
  • Revised Inner Outer Inner mode by @igiannakas in #4417 and #4416

  • Support new network connections to printer:

    1. Support for SimplyPrint cloud integration by @Noisyfox in #4525
      You can find more information about the SimplyPrint connection here: https://help.simplyprint.io/en/article/the-orcaslicer-simplyprint-integration-how-to-set-up-and-use-1miu532/
    2. Falashforge 5M network support by @iherbak in #4546
  • Fix an issue that only 1 bottom/top will be generated when ensure vertical thickness is set to None by @SoftFever in #4504
    image

  • Fixed an issue that changing printer selection clears out Process overrides by @SoftFever in #4506 issue #4145

  • Fix alternate extra wall warning: change ensure vertical shell thickness to Moderate instead of None by @SoftFever in #4463

  • Revert automatic application of reduced internal bridge filtering for lightning infill by @igiannakas in #4639

  • Fix startup crashes caused by splash screen by @SoftFever

  • Prevent crashes from edge cases when slicing complex small model with "big" fuzzy skin is used by @SoftFever

  • Fix issue that painter sphere is rendered at the wrong position by @Noisyfox in #4652

  • Fixed a bug that promption of installing plugin notification was not displayed when trying to switch to Bambu device tab by @SoftFever

Profiles:

Translations:

Miscs:


Support

If you appreciate my work and would like to support me, consider buying me a coffee.
Your support is greatly appreciated! :)
ko-fi

OrcaSlicer V2.0.0 Beta Release

12 Mar 11:58
Compare
Choose a tag to compare
Pre-release

What's Changed

This is OrcaSlicer V2.0.0 beta release.
This update introduces innovative new features and a lot of bug fixes and improvements.

  • Scarf joint seam: an innovative apprach to hide seams for FDM printing by @Noisyfox

    You probably have already heard of the "scarf joint" feature implemented in OrcaSlicer through forum/YouTube videos.
    It's a exicting new way to hide the seams in FDM printing.
    image

    scarf

    Main implementation is done by @Noisyfox in #3839

    Conditional scarf joint and slowdown for scarf joint only feature is done by @SoftFever in #4317

    A big shoutout to @vgdh and @MichaelJLew for coming up with this brilliant idea and the early-stage prototype

    A heartfelt thank you to everyone who participated in the testing and discussion, look at how many people are involved in the PR thread!
    image

    Adam(@psiberfunk) has done incredible scientific experiments. He wrote a great guide on how to use this feature, do check it out.

    Michael(TeachingTech) made a fantastic YouTube video to explain this feature, do check it out.

  • Small area flow compensation by @mjonuschat in #3334
    A feature aimed at addressing the challenge of over-extrusion in small areas of solid infill, an issue previously not well understood. By implementing a strategy that adjusts extrusion flow inversely proportional to the length of the extrusion line, we ensure that shorter lines receive less flow. This approach is visually represented in the software, with color coding—blue for reduced flow and red for increased flow—to clearly show the effect of the adjustments. This feature is designed to enhance print quality by providing a practical solution to the over-extrusion problem, making it easier for users to achieve consistent results across their prints.

    image
    image

    Big shoutout to @Alexander-T-Moss, who first came up with this innovative improvement and implemented it with scripts.

  • Orca Slicer now support OTA profile update for all 3d printers by @SoftFever in #4069
    image

  • QoL: 3D navigator by @Noisyfox in #4181

    viewbox
    You can turn it off in menu

  • Improve gap fill application strategy by @igiannakas in #3412

    gap fill

  • Add direct adaptive bed mesh support by @SoftFever in #4212

    Orca Slicer introduces comprehensive support for adaptive bed meshing across a variety of firmware, including Marlin, Klipper, and RepRapFirmware (RRF).
    This feature allows users to seamlessly integrate adaptive bed mesh commands within the Machine Start G-code.
    The implementation is designed to be straightforward, requiring no additional plugins or alterations to firmware settings, thereby enhancing user experience and print quality directly from Orca Slicer.
    Compared to existing adaptive bed mesh plugins for Klipper, the Orca Slicer implementation can handle max/min bed mesh safety limits to avoid potential crashing into the bed.
    For detailed usage, please refer to the Orca Slicer WIKI.
    Example of Adaptive Bed Mesh usage in Orca Slicer:

    Marlin:

    G29 X{bed_mesh_probe_count[0]} Y{bed_mesh_probe_count[1]} L{adaptive_bed_mesh_min[0]} R{adaptive_bed_mesh_max[0]} F{adaptive_bed_mesh_min[1]} B{adaptive_bed_mesh_max[1]} T V4
    

    Klipper:

    ; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally
    BED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=1 ADAPTIVE_MARGIN=0
    

    RRF:

    M557 X{adaptive_bed_mesh_min[0]}:{adaptive_bed_mesh_max[0]} Y{adaptive_bed_mesh_min[1]}:{adaptive_bed_mesh_max[1]} P{bed_mesh_probe_count[0]}:{bed_mesh_probe_count[1]}  
    
  • Allow specifying print order within each layer by @Noisyfox in #3685
    You can now adjust the print order of objects in "by layer" mode by dragging them in the object list. Choosing the "as object list" option from the layer order dropdown will ensure objects are printed in your specified order for each layer.
    image

  • Revist and improve "ensure vertical thickness" strategy and UX by @igiannakas and @SoftFever in #3235 and #4402

    ensure

  • Add a new handy model: Orca string hell by @SoftFever in #3892
    The model itself is pretty much a clone of the top part of the Autodesk FDM test model.
    It's handy to have a dedicated model to benchmark the stringing performance quickly, hence this handy model.
    This also serves as a mini user guide on the One Wall on Top Surfaces feature for models with text embossment on top surfaces.
    stringhell

    stringhell

  • UX: check and warn users if print speed/accel/jerk are higher than the machine limits by @SoftFever in #4403
    motion_limit

  • Improve pressure equalizer so that it's less aggressive by @Noisyfox in #4264
    image

  • [Feature] Introduced option to control amount of internal bridging, fixing internal bridge missing for some sloped surfaces by @igiannakas in #3319
    image

  • Port EditGCodeDialog from PrusaSlicer by @Ocraftyone in #3417
    gcode

  • Port "counterbole hole bridging" feature from SuperSlicer(it's called "No Unsupported Perimeters" in SS) by @Ocraftyone and @Noisyfox in #3189

    counterbole

  • Fixed a bug that in edge cases, wrong top surfaces were detected by @SoftFever in #4244

  • Improvement: Corrected monotonic lines now respect user infill / wall overlap setting by @igiannakas in #3388

  • Add configurable short wall/perimeter cleaning for Arachne by @scottmudge in #2790

  • Fix #3311: filament Load / Unload time was not used in time estimation by @eoyilmaz in #3706

  • Add shell type to STEP importer, to fix importing of some STEP files by @scottmudge in #4247

  • Pressure equalizer documentation by @igiannakas in #4334

  • Improve PA tower: 1. support large nozzles 2. remove jerk=1 settings 3. move settings changes to object to avoid accidently saving the profile by @SoftFever in #4382

  • Support for Obico cloud integration by @kennethjiang in #4116

    For more detailed guild, please check this page: https://obico.io/docs/user-guides/orca-slicer-integration/

  • Allow specify wall directions by @Noisyfox in #4156

  • ENH: Better Scrolling Over Multiline Fields by @Ocraftyone in #4218

  • Improve ExtrusionLine::simplify, eliminating many very-short extrusion segments which led to blemishes in thin-wall models sliced with Arachne - Take 2 by @sethml in #3750

  • Decouple filament minimum print speed from overhang slowdown by @igiannakas in #3859

  • Fix an issue that exporting fil...

Read more