diff --git a/resources/profiles/Creality.json b/resources/profiles/Creality.json index 871f2ffb7c9..e2552c02f62 100644 --- a/resources/profiles/Creality.json +++ b/resources/profiles/Creality.json @@ -278,13 +278,25 @@ "name": "0.12mm Fine @Creality Ender3V2Neo", "sub_path": "process/0.12mm Fine @Creality Ender3V2Neo.json" }, + { + "name": "0.12mm Fine @Creality Ender3V3KE", + "sub_path": "process/0.12mm Fine @Creality Ender3V3KE.json" + }, + { + "name": "0.12mm Fine @Creality Ender3V3SE 0.2", + "sub_path": "process/0.12mm Fine @Creality Ender3V3SE 0.2.json" + }, { "name": "0.12mm Fine @Creality Ender3V3SE", "sub_path": "process/0.12mm Fine @Creality Ender3V3SE.json" }, { - "name": "0.12mm Fine @Creality Ender3V3KE", - "sub_path": "process/0.12mm Fine @Creality Ender3V3KE.json" + "name": "0.12mm Fine @Creality Ender3V3SE 0.6", + "sub_path": "process/0.12mm Fine @Creality Ender3V3SE 0.6.json" + }, + { + "name": "0.12mm Fine @Creality Ender3V3SE 0.8", + "sub_path": "process/0.12mm Fine @Creality Ender3V3SE 0.8.json" }, { "name": "0.12mm Detail @Creality Ender5Pro (2019) 0.2", @@ -358,13 +370,25 @@ "name": "0.16mm Optimal @Creality Ender3S1Pro", "sub_path": "process/0.16mm Optimal @Creality Ender3S1Pro.json" }, + { + "name": "0.16mm Optimal @Creality Ender3V3KE", + "sub_path": "process/0.16mm Optimal @Creality Ender3V3KE.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3V3SE 0.2", + "sub_path": "process/0.16mm Optimal @Creality Ender3V3SE 0.2.json" + }, { "name": "0.16mm Optimal @Creality Ender3V3SE", "sub_path": "process/0.16mm Optimal @Creality Ender3V3SE.json" }, { - "name": "0.16mm Optimal @Creality Ender3V3KE", - "sub_path": "process/0.16mm Optimal @Creality Ender3V3KE.json" + "name": "0.16mm Optimal @Creality Ender3V3SE 0.6", + "sub_path": "process/0.16mm Optimal @Creality Ender3V3SE 0.6.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3V3SE 0.8", + "sub_path": "process/0.16mm Optimal @Creality Ender3V3SE 0.8.json" }, { "name": "0.16mm Optimal @Creality Ender5", @@ -474,13 +498,25 @@ "name": "0.20mm Standard @Creality Ender3S1Pro", "sub_path": "process/0.20mm Standard @Creality Ender3S1Pro.json" }, + { + "name": "0.20mm Standard @Creality Ender3V3KE", + "sub_path": "process/0.20mm Standard @Creality Ender3V3KE.json" + }, + { + "name": "0.20mm Standard @Creality Ender3V3SE 0.2", + "sub_path": "process/0.20mm Standard @Creality Ender3V3SE 0.2.json" + }, { "name": "0.20mm Standard @Creality Ender3V3SE", "sub_path": "process/0.20mm Standard @Creality Ender3V3SE.json" }, { - "name": "0.20mm Standard @Creality Ender3V3KE", - "sub_path": "process/0.20mm Standard @Creality Ender3V3KE.json" + "name": "0.20mm Standard @Creality Ender3V3SE 0.6", + "sub_path": "process/0.20mm Standard @Creality Ender3V3SE 0.6.json" + }, + { + "name": "0.20mm Standard @Creality Ender3V3SE 0.8", + "sub_path": "process/0.20mm Standard @Creality Ender3V3SE 0.8.json" }, { "name": "0.20mm Standard @Creality Ender5", @@ -578,13 +614,25 @@ "name": "0.24mm Draft @Creality Ender3V2Neo", "sub_path": "process/0.24mm Draft @Creality Ender3V2Neo.json" }, + { + "name": "0.24mm Draft @Creality Ender3V3KE", + "sub_path": "process/0.24mm Draft @Creality Ender3V3KE.json" + }, + { + "name": "0.24mm Draft @Creality Ender3V3SE 0.2", + "sub_path": "process/0.24mm Draft @Creality Ender3V3SE 0.2.json" + }, { "name": "0.24mm Draft @Creality Ender3V3SE", "sub_path": "process/0.24mm Draft @Creality Ender3V3SE.json" }, { - "name": "0.24mm Draft @Creality Ender3V3KE", - "sub_path": "process/0.24mm Draft @Creality Ender3V3KE.json" + "name": "0.24mm Draft @Creality Ender3V3SE 0.6", + "sub_path": "process/0.24mm Draft @Creality Ender3V3SE 0.6.json" + }, + { + "name": "0.24mm Draft @Creality Ender3V3SE 0.8", + "sub_path": "process/0.24mm Draft @Creality Ender3V3SE 0.8.json" }, { "name": "0.24mm Draft @Creality Ender5Pro (2019) 0.3", @@ -1030,10 +1078,22 @@ "name": "Creality Ender-3 S1 Pro 0.4 nozzle", "sub_path": "machine/Creality Ender-3 S1 Pro 0.4 nozzle.json" }, + { + "name": "Creality Ender-3 V3 SE 0.2 nozzle", + "sub_path": "machine/Creality Ender-3 V3 SE 0.2 nozzle.json" + }, { "name": "Creality Ender-3 V3 SE 0.4 nozzle", "sub_path": "machine/Creality Ender-3 V3 SE 0.4 nozzle.json" }, + { + "name": "Creality Ender-3 V3 SE 0.6 nozzle", + "sub_path": "machine/Creality Ender-3 V3 SE 0.6 nozzle.json" + }, + { + "name": "Creality Ender-3 V3 SE 0.8 nozzle", + "sub_path": "machine/Creality Ender-3 V3 SE 0.8 nozzle.json" + }, { "name": "Creality Ender-3 V3 KE 0.4 nozzle", "sub_path": "machine/Creality Ender-3 V3 KE 0.4 nozzle.json" diff --git a/resources/profiles/Creality/filament/Creality Generic ABS @Ender-3V3-all.json b/resources/profiles/Creality/filament/Creality Generic ABS @Ender-3V3-all.json index 5ec085011ad..eaad0a146fe 100644 --- a/resources/profiles/Creality/filament/Creality Generic ABS @Ender-3V3-all.json +++ b/resources/profiles/Creality/filament/Creality Generic ABS @Ender-3V3-all.json @@ -8,7 +8,10 @@ "filament_max_volumetric_speed": ["9"], "slow_down_layer_time": ["5"], "compatible_printers": [ + "Creality Ender-3 V3 SE 0.2 nozzle", "Creality Ender-3 V3 SE 0.4 nozzle", + "Creality Ender-3 V3 SE 0.6 nozzle", + "Creality Ender-3 V3 SE 0.8 nozzle", "Creality Ender-3 V3 KE 0.4 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic ASA @Ender-3V3-all.json b/resources/profiles/Creality/filament/Creality Generic ASA @Ender-3V3-all.json index 6778d2f3c1f..9a8f1a77317 100644 --- a/resources/profiles/Creality/filament/Creality Generic ASA @Ender-3V3-all.json +++ b/resources/profiles/Creality/filament/Creality Generic ASA @Ender-3V3-all.json @@ -8,7 +8,10 @@ "filament_max_volumetric_speed": ["9"], "slow_down_layer_time": ["5"], "compatible_printers": [ + "Creality Ender-3 V3 SE 0.2 nozzle", "Creality Ender-3 V3 SE 0.4 nozzle", + "Creality Ender-3 V3 SE 0.6 nozzle", + "Creality Ender-3 V3 SE 0.8 nozzle", "Creality Ender-3 V3 KE 0.4 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic PETG @Ender-3V3-all.json b/resources/profiles/Creality/filament/Creality Generic PETG @Ender-3V3-all.json index e3f120dd15e..1a5bc133de5 100644 --- a/resources/profiles/Creality/filament/Creality Generic PETG @Ender-3V3-all.json +++ b/resources/profiles/Creality/filament/Creality Generic PETG @Ender-3V3-all.json @@ -18,7 +18,10 @@ "nozzle_temperature_initial_layer": ["250"], "nozzle_temperature": ["250"], "compatible_printers": [ + "Creality Ender-3 V3 SE 0.2 nozzle", "Creality Ender-3 V3 SE 0.4 nozzle", + "Creality Ender-3 V3 SE 0.6 nozzle", + "Creality Ender-3 V3 SE 0.8 nozzle", "Creality Ender-3 V3 KE 0.4 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic PLA @Ender-3V3-all.json b/resources/profiles/Creality/filament/Creality Generic PLA @Ender-3V3-all.json index 8ebfd51d93d..8230c3b9317 100644 --- a/resources/profiles/Creality/filament/Creality Generic PLA @Ender-3V3-all.json +++ b/resources/profiles/Creality/filament/Creality Generic PLA @Ender-3V3-all.json @@ -16,7 +16,10 @@ "hot_plate_temp_initial_layer" : ["55"], "textured_plate_temp_initial_layer" : ["55"], "compatible_printers": [ + "Creality Ender-3 V3 SE 0.2 nozzle", "Creality Ender-3 V3 SE 0.4 nozzle", + "Creality Ender-3 V3 SE 0.6 nozzle", + "Creality Ender-3 V3 SE 0.8 nozzle", "Creality Ender-3 V3 KE 0.4 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic PLA High Speed @Ender-3V3-all.json b/resources/profiles/Creality/filament/Creality Generic PLA High Speed @Ender-3V3-all.json index cdde5f2a364..1c09f3d7759 100644 --- a/resources/profiles/Creality/filament/Creality Generic PLA High Speed @Ender-3V3-all.json +++ b/resources/profiles/Creality/filament/Creality Generic PLA High Speed @Ender-3V3-all.json @@ -9,7 +9,10 @@ "23" ], "compatible_printers": [ + "Creality Ender-3 V3 SE 0.2 nozzle", "Creality Ender-3 V3 SE 0.4 nozzle", + "Creality Ender-3 V3 SE 0.6 nozzle", + "Creality Ender-3 V3 SE 0.8 nozzle", "Creality Ender-3 V3 KE 0.4 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic PLA Matte @Ender-3V3-all.json b/resources/profiles/Creality/filament/Creality Generic PLA Matte @Ender-3V3-all.json index 13bedf73fea..3b5d9fabb8e 100644 --- a/resources/profiles/Creality/filament/Creality Generic PLA Matte @Ender-3V3-all.json +++ b/resources/profiles/Creality/filament/Creality Generic PLA Matte @Ender-3V3-all.json @@ -7,7 +7,10 @@ "inherits": "Creality Generic PLA @Ender-3V3-all", "filament_max_volumetric_speed": ["18"], "compatible_printers": [ + "Creality Ender-3 V3 SE 0.2 nozzle", "Creality Ender-3 V3 SE 0.4 nozzle", + "Creality Ender-3 V3 SE 0.6 nozzle", + "Creality Ender-3 V3 SE 0.8 nozzle", "Creality Ender-3 V3 KE 0.4 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic PLA Silk @Ender-3V3-all.json b/resources/profiles/Creality/filament/Creality Generic PLA Silk @Ender-3V3-all.json index 276f81d6710..b735ccfad60 100644 --- a/resources/profiles/Creality/filament/Creality Generic PLA Silk @Ender-3V3-all.json +++ b/resources/profiles/Creality/filament/Creality Generic PLA Silk @Ender-3V3-all.json @@ -7,7 +7,10 @@ "inherits": "Creality Generic PLA @Ender-3V3-all", "filament_max_volumetric_speed": ["7.5"], "compatible_printers": [ + "Creality Ender-3 V3 SE 0.2 nozzle", "Creality Ender-3 V3 SE 0.4 nozzle", + "Creality Ender-3 V3 SE 0.6 nozzle", + "Creality Ender-3 V3 SE 0.8 nozzle", "Creality Ender-3 V3 KE 0.4 nozzle" ] } \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic TPU @Ender-3V3-all.json b/resources/profiles/Creality/filament/Creality Generic TPU @Ender-3V3-all.json index 5b1d6cf6659..75c2d8d8341 100644 --- a/resources/profiles/Creality/filament/Creality Generic TPU @Ender-3V3-all.json +++ b/resources/profiles/Creality/filament/Creality Generic TPU @Ender-3V3-all.json @@ -1,20 +1,23 @@ { - "type": "filament", - "setting_id": "GFU99_CREALITY_00", - "name": "Creality Generic TPU @Ender-3V3-all", - "from": "system", - "instantiation": "true", - "inherits": "Creality Generic TPU", - "hot_plate_temp": ["30"], - "hot_plate_temp_initial_layer": ["30"], - "textured_plate_temp": ["30"], - "textured_plate_temp_initial_layer": ["30"], - "nozzle_temperature_initial_layer": ["230"], - "nozzle_temperature": ["230"], - "filament_max_volumetric_speed": ["3.5"], - "slow_down_layer_time": ["5"], - "compatible_printers": [ - "Creality Ender-3 V3 SE 0.4 nozzle", - "Creality Ender-3 V3 KE 0.4 nozzle" - ] + "type": "filament", + "setting_id": "GFU99_CREALITY_00", + "name": "Creality Generic TPU @Ender-3V3-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic TPU", + "hot_plate_temp": ["30"], + "hot_plate_temp_initial_layer": ["30"], + "textured_plate_temp": ["30"], + "textured_plate_temp_initial_layer": ["30"], + "nozzle_temperature_initial_layer": ["230"], + "nozzle_temperature": ["230"], + "filament_max_volumetric_speed": ["3.5"], + "slow_down_layer_time": ["5"], + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.2 nozzle", + "Creality Ender-3 V3 SE 0.4 nozzle", + "Creality Ender-3 V3 SE 0.6 nozzle", + "Creality Ender-3 V3 SE 0.8 nozzle", + "Creality Ender-3 V3 KE 0.4 nozzle" + ] } \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality Ender-3 Pro 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 Pro 0.4 nozzle.json index ca050a468e4..50d89f5dc26 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 Pro 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 Pro 0.4 nozzle.json @@ -8,7 +8,7 @@ "printer_model": "Creality Ender-3 Pro", "printer_variant": "0.4", "printer_structure": "i3", - "default_print_profile": "0.20mm Standard @Creality Ender3 Pro", + "default_print_profile": "0.20mm Standard @Creality Ender3 Pro 0.4", "thumbnails": [""], "nozzle_diameter": [ "0.4" diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json new file mode 100644 index 00000000000..0ad4760407b --- /dev/null +++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json @@ -0,0 +1,124 @@ +{ + "type": "machine", + "setting_id": "GM001", + "printer_settings_id": "Creality", + "name": "Creality Ender-3 V3 SE 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 V3 SE", + "printer_variant": "0.2", + "gcode_flavor": "marlin2", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality Ender3V3SE 0.2", + "extruder_clearance_height_to_rod": "47", + "extruder_clearance_max_radius": "90", + "extruder_clearance_radius": "90", + "machine_load_filament_time": "11", + "nozzle_diameter": [ + "0.2" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "nozzle_type": "brass", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "5000", + "5000" + ], + "machine_max_acceleration_retracting": [ + "2500", + "2500" + ], + "machine_max_acceleration_travel": [ + "5000", + "5000" + ], + "machine_max_acceleration_x": [ + "5000", + "5000" + ], + "machine_max_acceleration_y": [ + "5000", + "5000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "10", + "10" + ], + "machine_max_jerk_y": [ + "10", + "10" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.32" + ], + "min_layer_height": [ + "0.08" + ], + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "1.2" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "30" + ], + "deretraction_speed": [ + "30" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA @Ender-3V3-all" + ], + "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \nM420 S1; Enable mesh leveling \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", + "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z", + "scan_first_layer": "0", + "thumbnails": [ + "96x96", + "300x300" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json index 81210d5a727..4911dcc32b5 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json @@ -7,6 +7,7 @@ "instantiation": "true", "inherits": "fdm_creality_common", "printer_model": "Creality Ender-3 V3 SE", + "printer_variant": "0.4", "gcode_flavor": "marlin2", "printer_structure": "i3", "default_print_profile": "0.20mm Standard @Creality Ender3V3SE", @@ -113,7 +114,7 @@ "default_filament_profile": [ "Creality Generic PLA @Ender-3V3-all" ], - "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \n \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", + "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \nM420 S1; Enable mesh leveling \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z", "scan_first_layer": "0", "thumbnails": [ diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json new file mode 100644 index 00000000000..75b28a18ae7 --- /dev/null +++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json @@ -0,0 +1,124 @@ +{ + "type": "machine", + "setting_id": "GM001", + "printer_settings_id": "Creality", + "name": "Creality Ender-3 V3 SE 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 V3 SE", + "printer_variant": "0.6", + "gcode_flavor": "marlin2", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality Ender3V3SE 0.6", + "extruder_clearance_height_to_rod": "47", + "extruder_clearance_max_radius": "90", + "extruder_clearance_radius": "90", + "machine_load_filament_time": "11", + "nozzle_diameter": [ + "0.6" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "nozzle_type": "brass", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "5000", + "5000" + ], + "machine_max_acceleration_retracting": [ + "2500", + "2500" + ], + "machine_max_acceleration_travel": [ + "5000", + "5000" + ], + "machine_max_acceleration_x": [ + "5000", + "5000" + ], + "machine_max_acceleration_y": [ + "5000", + "5000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "10", + "10" + ], + "machine_max_jerk_y": [ + "10", + "10" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.32" + ], + "min_layer_height": [ + "0.08" + ], + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "1.2" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "30" + ], + "deretraction_speed": [ + "30" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA @Ender-3V3-all" + ], + "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \nM420 S1; Enable mesh leveling \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", + "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z", + "scan_first_layer": "0", + "thumbnails": [ + "96x96", + "300x300" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json new file mode 100644 index 00000000000..59e8f249dc0 --- /dev/null +++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json @@ -0,0 +1,124 @@ +{ + "type": "machine", + "setting_id": "GM001", + "printer_settings_id": "Creality", + "name": "Creality Ender-3 V3 SE 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 V3 SE", + "printer_variant": "0.8", + "gcode_flavor": "marlin2", + "printer_structure": "i3", + "default_print_profile": "0.20mm Standard @Creality Ender3V3SE 0.8", + "extruder_clearance_height_to_rod": "47", + "extruder_clearance_max_radius": "90", + "extruder_clearance_radius": "90", + "machine_load_filament_time": "11", + "nozzle_diameter": [ + "0.8" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "250", + "nozzle_type": "brass", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "5000", + "5000" + ], + "machine_max_acceleration_retracting": [ + "2500", + "2500" + ], + "machine_max_acceleration_travel": [ + "5000", + "5000" + ], + "machine_max_acceleration_x": [ + "5000", + "5000" + ], + "machine_max_acceleration_y": [ + "5000", + "5000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "10", + "10" + ], + "machine_max_jerk_y": [ + "10", + "10" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.32" + ], + "min_layer_height": [ + "0.08" + ], + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "1.2" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "30" + ], + "deretraction_speed": [ + "30" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA @Ender-3V3-all" + ], + "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \nM420 S1; Enable mesh leveling \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", + "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z", + "scan_first_layer": "0", + "thumbnails": [ + "96x96", + "300x300" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE.json index 53f04988ac7..e57336ac2ce 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE.json @@ -2,7 +2,7 @@ "type": "machine_model", "name": "Creality Ender-3 V3 SE", "model_id": "Creality-Ender3-V3-SE", - "nozzle_diameter": "0.4", + "nozzle_diameter": "0.2;0.4;0.6;0.8", "machine_tech": "FFF", "family": "Creality", "bed_model": "creality_ender3v3se_buildplate_model.stl", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json new file mode 100644 index 00000000000..49c2731f112 --- /dev/null +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Ender3V3SE 0.2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.12", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.42", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.46", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.46", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.42", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "4", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "25", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.42", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "8", + "outer_wall_jerk": "20", + "inner_wall_jerk": "20", + "infill_jerk": "20", + "top_surface_jerk": "20", + "initial_layer_jerk": "8", + "travel_jerk": "8", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json new file mode 100644 index 00000000000..155366410f8 --- /dev/null +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Ender3V3SE 0.6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.12", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.42", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.46", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.46", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.42", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "4", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "25", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.42", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "8", + "outer_wall_jerk": "20", + "inner_wall_jerk": "20", + "infill_jerk": "20", + "top_surface_jerk": "20", + "initial_layer_jerk": "8", + "travel_jerk": "8", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json new file mode 100644 index 00000000000..e5ac797e01f --- /dev/null +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Fine @Creality Ender3V3SE 0.8", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.12", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.42", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.46", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.46", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.42", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "4", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "25", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.42", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "8", + "outer_wall_jerk": "20", + "inner_wall_jerk": "20", + "infill_jerk": "20", + "top_surface_jerk": "20", + "initial_layer_jerk": "8", + "travel_jerk": "8", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE.json index 91842734a1b..b9b5e749ff8 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE.json @@ -113,6 +113,6 @@ "initial_layer_jerk": "8", "travel_jerk": "8", "compatible_printers": [ - "Creality Ender-3 V3 SE 0.4 nozzle" + "Creality Ender-3 V3 SE" ] } \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json new file mode 100644 index 00000000000..d2f8ed8eefa --- /dev/null +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender3V3SE 0.2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.42", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.46", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.46", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.42", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "25", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.42", + "top_shell_layers": "6", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "8", + "outer_wall_jerk": "20", + "inner_wall_jerk": "20", + "infill_jerk": "20", + "top_surface_jerk": "20", + "initial_layer_jerk": "8", + "travel_jerk": "8", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json new file mode 100644 index 00000000000..f6dab37b93d --- /dev/null +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender3V3SE 0.6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.42", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.46", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.46", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.42", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "25", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.42", + "top_shell_layers": "6", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "8", + "outer_wall_jerk": "20", + "inner_wall_jerk": "20", + "infill_jerk": "20", + "top_surface_jerk": "20", + "initial_layer_jerk": "8", + "travel_jerk": "8", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json new file mode 100644 index 00000000000..f0989462d45 --- /dev/null +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality Ender3V3SE 0.8", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.42", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.46", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.46", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.42", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "25", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.42", + "top_shell_layers": "6", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "8", + "outer_wall_jerk": "20", + "inner_wall_jerk": "20", + "infill_jerk": "20", + "top_surface_jerk": "20", + "initial_layer_jerk": "8", + "travel_jerk": "8", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE.json index 824a468f8d6..9f784cdb156 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE.json @@ -113,6 +113,6 @@ "initial_layer_jerk": "8", "travel_jerk": "8", "compatible_printers": [ - "Creality Ender-3 V3 SE 0.4 nozzle" + "Creality Ender-3 V3 SE" ] } \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json new file mode 100644 index 00000000000..b289cfe41ab --- /dev/null +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3V3SE 0.2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.42", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.46", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.46", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.42", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "25", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.42", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "8", + "outer_wall_jerk": "20", + "inner_wall_jerk": "20", + "infill_jerk": "20", + "top_surface_jerk": "20", + "initial_layer_jerk": "8", + "travel_jerk": "8", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json new file mode 100644 index 00000000000..d55e0c50593 --- /dev/null +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3V3SE 0.6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.42", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.46", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.46", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.42", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "25", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.42", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "8", + "outer_wall_jerk": "20", + "inner_wall_jerk": "20", + "infill_jerk": "20", + "top_surface_jerk": "20", + "initial_layer_jerk": "8", + "travel_jerk": "8", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json new file mode 100644 index 00000000000..84e860b5d9f --- /dev/null +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality Ender3V3SE 0.8", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.42", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.46", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.46", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.42", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "25", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.42", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "8", + "outer_wall_jerk": "20", + "inner_wall_jerk": "20", + "infill_jerk": "20", + "top_surface_jerk": "20", + "initial_layer_jerk": "8", + "travel_jerk": "8", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE.json index 5eb897dc41d..1978a6e65bd 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE.json @@ -113,6 +113,6 @@ "initial_layer_jerk": "8", "travel_jerk": "8", "compatible_printers": [ - "Creality Ender-3 V3 SE 0.4 nozzle" + "Creality Ender-3 V3 SE" ] } \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json new file mode 100644 index 00000000000..ad47ef425fa --- /dev/null +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender3V3SE 0.2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.42", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.46", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.46", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.42", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "25", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.42", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "8", + "outer_wall_jerk": "20", + "inner_wall_jerk": "20", + "infill_jerk": "20", + "top_surface_jerk": "20", + "initial_layer_jerk": "8", + "travel_jerk": "8", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json new file mode 100644 index 00000000000..5a8332d664d --- /dev/null +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender3V3SE 0.6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.42", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.46", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.46", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.42", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "25", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.42", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "8", + "outer_wall_jerk": "20", + "inner_wall_jerk": "20", + "infill_jerk": "20", + "top_surface_jerk": "20", + "initial_layer_jerk": "8", + "travel_jerk": "8", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json new file mode 100644 index 00000000000..597b70e6f1d --- /dev/null +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json @@ -0,0 +1,118 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality Ender3V3SE 0.8", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.24", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "100", + "brim_type": "no_brim", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "2500", + "top_surface_acceleration": "2500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.42", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.46", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "500", + "travel_acceleration": "2500", + "inner_wall_acceleration": "2000", + "outer_wall_acceleration": "1000", + "initial_layer_line_width": "0.46", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "15%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "20", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "0", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0.42", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.5", + "support_interface_speed": "100%", + "support_interface_pattern": "auto", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "50", + "support_threshold_angle": "25", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "2", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.42", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "80", + "outer_wall_speed": "60", + "inner_wall_speed": "90", + "internal_solid_infill_speed": "180", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "sparse_infill_speed": "180", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "default_jerk": "8", + "outer_wall_jerk": "20", + "inner_wall_jerk": "20", + "infill_jerk": "20", + "top_surface_jerk": "20", + "initial_layer_jerk": "8", + "travel_jerk": "8", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE.json index c2a0066d424..43f9be09887 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE.json @@ -113,6 +113,6 @@ "initial_layer_jerk": "8", "travel_jerk": "8", "compatible_printers": [ - "Creality Ender-3 V3 SE 0.4 nozzle" + "Creality Ender-3 V3 SE" ] } \ No newline at end of file