You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Create new project.
Insert standard cube.
We will evaluate the upper surface.
Set filament→flow rate to 1. Slice the model.
Switch preview color scheme to "Flow".
Remember the value
Set filament→flow rate to 0.5. Slice the model.
Switch preview color scheme to "Flow".
Compare new value with previous.
Actual results
The values differ by a factor of four
Expected results
The values differ by a factor of two
Project file & Debug log uploads
Note that REAL flows differ by a factor of two. The issue is about preview, not g-code flow.zip
Checklist of files to include
Log file
Project file
Anything else?
No response
The text was updated successfully, but these errors were encountered:
I noticed a similar, but opposite issue with the settings "Top surface flow ratio" and " Bottom surface flow ratio" - both need to be changed to a larger extend than expected, in order to achieve a minor change of the corresponding flow rate. I cannot quantify the deviation, but something is definitely wrong here too.
Is there an existing issue for this problem?
OrcaSlicer Version
2.1.1
Operating System (OS)
Linux
OS Version
Linux Mint 21.3 Cinnamon
Additional system information
System:
Kernel: 6.8.0-40-generic x86_64 bits: 64 compiler: N/A Desktop: Cinnamon 6.0.4 tk: GTK 3.24.33
wm: muffin vt: 7 dm: LightDM 1.30.0 Distro: Linux Mint 21.3 Virginia base: Ubuntu 22.04 jammy
Machine:
Type: Desktop Mobo: ASRock model: A520M-ITX/ac serial:
UEFI: American Megatrends v: P1.10 date: 08/24/2020
CPU:
Info: 8-core model: AMD Ryzen 7 PRO 4750G with Radeon Graphics bits: 64 type: MT MCP
smt: enabled arch: Zen 2 rev: 1 cache: L1: 512 KiB L2: 4 MiB L3: 8 MiB
Speed (MHz): avg: 1881 high: 4289 min/max: 400/4454 cores: 1: 400 2: 400 3: 4286 4: 2864
5: 400 6: 400 7: 4117 8: 3459 9: 400 10: 4289 11: 400 12: 400 13: 400 14: 400 15: 4178 16: 3305
bogomips: 114989
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Graphics:
Device-1: AMD Renoir driver: amdgpu v: kernel pcie: speed: 8 GT/s lanes: 16 ports:
active: DP-1,HDMI-A-1 empty: DP-2 bus-ID: 07:00.0 chip-ID: 1002:1636 class-ID: 0300
Device-2: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo bus-ID: 3-2:2
chip-ID: 046d:0825 class-ID: 0102 serial:
Display: x11 server: X.Org v: 1.21.1.4 driver: X: loaded: amdgpu,ati
unloaded: fbdev,modesetting,vesa gpu: amdgpu display-ID: :0 screens: 1
Screen-1: 0 s-res: 3840x1080 s-dpi: 96 s-size: 1016x285mm (40.0x11.2") s-diag: 1055mm (41.5")
Monitor-1: DisplayPort-0 mapped: DP-1 pos: right model: Philips PHL 243V7 serial:
res: 1920x1080 hz: 60 dpi: 93 size: 527x296mm (20.7x11.7") diag: 604mm (23.8") modes:
max: 1920x1080 min: 720x400
Monitor-2: HDMI-A-0 mapped: HDMI-A-1 pos: primary,left model: Philips PHL 243V7
serial: res: 1920x1080 hz: 60 dpi: 93 size: 527x296mm (20.7x11.7") diag: 604mm (23.8")
modes: max: 1920x1080 min: 720x400
OpenGL: renderer: RENOIR (renoir LLVM 15.0.7 DRM 3.57 6.8.0-40-generic)
v: 4.6 Mesa 23.2.1-1ubuntu3.1~22.04.2 direct render: Yes
Audio:
Device-1: AMD Renoir Radeon High Definition Audio driver: snd_hda_intel v: kernel pcie:
speed: 8 GT/s lanes: 16 bus-ID: 07:00.1 chip-ID: 1002:1637 class-ID: 0403
Device-2: AMD Family 17h HD Audio vendor: ASRock driver: snd_hda_intel v: kernel pcie:
speed: 8 GT/s lanes: 16 bus-ID: 07:00.6 chip-ID: 1022:15e3 class-ID: 0403
Device-3: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo bus-ID: 3-2:2
chip-ID: 046d:0825 class-ID: 0102 serial:
Sound Server-1: ALSA v: k6.8.0-40-generic running: yes
Sound Server-2: PulseAudio v: 15.99.1 running: yes
Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASRock driver: r8169
v: kernel pcie: speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 03:00.0 chip-ID: 10ec:8168
class-ID: 0200
IF: enp3s0 state: up speed: 100 Mbps duplex: full mac:
Device-2: Intel Dual Band Wireless-AC 3168NGW [Stone Peak] driver: iwlwifi v: kernel pcie:
speed: 2.5 GT/s lanes: 1 bus-ID: 04:00.0 chip-ID: 8086:24fb class-ID: 0280
IF: wlp4s0 state: up mac:
IF-ID-1: br-440a152ade08 state: down mac:
IF-ID-2: br-68923040f141 state: down mac:
IF-ID-3: br-6b8a6516ba64 state: up speed: 10000 Mbps duplex: unknown mac:
IF-ID-4: br-b6e2661fdbba state: down mac:
IF-ID-5: br-e4275738629e state: up speed: 10000 Mbps duplex: unknown mac:
IF-ID-6: cscotun0 state: unknown speed: 10000 Mbps duplex: full mac: N/A
IF-ID-7: docker0 state: down mac:
IF-ID-8: veth6123fbe state: up speed: 10000 Mbps duplex: full mac:
IF-ID-9: veth66fced7 state: up speed: 10000 Mbps duplex: full mac:
IF-ID-10: vethc7de553 state: up speed: 10000 Mbps duplex: full mac:
Bluetooth:
Device-1: Intel Wireless-AC 3168 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-9:5
chip-ID: 8087:0aa7 class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 0 state: down bt-service: enabled,running rfk-block:
hardware: no software: yes address:
Drives:
Local Storage: total: 447.13 GiB used: 355.92 GiB (79.6%)
ID-1: /dev/sda vendor: Kingston model: SA400M8480G size: 447.13 GiB speed: 6.0 Gb/s type: SSD
serial: rev: K1B3 scheme: GPT
Partition:
ID-1: / size: 218.95 GiB used: 168.71 GiB (77.1%) fs: ext4 dev: /dev/sda2
ID-2: /boot/efi size: 486 MiB used: 6.1 MiB (1.2%) fs: vfat dev: /dev/sda1
ID-3: /home size: 218.57 GiB used: 187.21 GiB (85.6%) fs: ext4 dev: /dev/sda3
Swap:
ID-1: swap-1 type: file size: 2 GiB used: 1.99 GiB (99.7%) priority: -2 file: /swapfile
USB:
Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 9 rev: 2.0 speed: 480 Mb/s
chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-3:2 info: Logitech Keyboard K120 type: Keyboard,HID driver: hid-generic,usbhid
interfaces: 2 rev: 1.1 speed: 1.5 Mb/s power: 90mA chip-ID: 046d:c31c class-ID: 0300
Device-2: 1-4:3 info: Logitech M105 Optical Mouse type: Mouse driver: hid-generic,usbhid
interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 100mA chip-ID: 046d:c077 class-ID: 0301
Device-3: 1-8:4 info: ASRock LED Controller type: HID driver: hid-generic,usbhid interfaces: 1
rev: 1.1 speed: 12 Mb/s power: 100mA chip-ID: 26ce:01a2 class-ID: 0300 serial:
Device-4: 1-9:5 info: Intel Wireless-AC 3168 Bluetooth type: Bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0aa7 class-ID: e001
Hub-2: 2-0:1 info: Super-speed hub ports: 3 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003
class-ID: 0900
Hub-3: 3-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s
chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 3-2:2 info: Logitech Webcam C270 type: Video,Audio driver: snd-usb-audio,uvcvideo
interfaces: 4 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 046d:0825 class-ID: 0102
serial:
Hub-4: 4-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003
class-ID: 0900
Hub-5: 5-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s
chip-ID: 1d6b:0002 class-ID: 0900
Hub-6: 6-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003
class-ID: 0900
Sensors:
System Temperatures: cpu: N/A mobo: N/A gpu: amdgpu temp: 53.0 C
Fan Speeds (RPM): N/A
Repos:
Packages: 3415 note: see --pkg apt: 3397 flatpak: 18
No active apt repos in: /etc/apt/sources.list
No active apt repos in: /etc/apt/sources.list.d/additional-repositories.list
Active apt repos in: /etc/apt/sources.list.d/appimagelauncher-team-stable-jammy.list
1: deb [signed-by=/etc/apt/keyrings/appimagelauncher-team-stable-jammy.gpg] https: //ppa.launchpadcontent.net/appimagelauncher-team/stable/ubuntu jammy main
Active apt repos in: /etc/apt/sources.list.d/git-core-ppa-focal.list
1: deb http: //ppa.launchpad.net/git-core/ppa/ubuntu jammy main
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] http: //dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/nodesource.list
1: deb [signed-by=/usr/share/keyrings/nodesource.gpg] https: //deb.nodesource.com/node_19.x focal main
2: deb-src [signed-by=/usr/share/keyrings/nodesource.gpg] https: //deb.nodesource.com/node_19.x focal main
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http: //packages.linuxmint.com virginia main upstream import backport
2: deb http: //archive.ubuntu.com/ubuntu jammy main restricted universe multiverse
3: deb http: //archive.ubuntu.com/ubuntu jammy-updates main restricted universe multiverse
4: deb http: //archive.ubuntu.com/ubuntu jammy-backports main restricted universe multiverse
5: deb http: //security.ubuntu.com/ubuntu/ jammy-security main restricted universe multiverse
No active apt repos in: /etc/apt/sources.list.d/oibaf-graphics-drivers-jammy.list
Active apt repos in: /etc/apt/sources.list.d/skype-stable.list
1: deb [arch=amd64] https: //repo.skype.com/deb stable main
Active apt repos in: /etc/apt/sources.list.d/sublime-text.list
1: deb https: //download.sublimetext.com/ apt/stable/
Active apt repos in: /etc/apt/sources.list.d/tensor.list
1: deb https: //update.sbis.ru/Sbis3Plugin/24.3220.33/linux/deb_repo ./
Active apt repos in: /etc/apt/sources.list.d/winehq.list
1: deb [signed-by=/usr/share/keyrings/winehq.gpg] http: //dl.winehq.org/wine-builds/ubuntu/ jammy main
Info:
Processes: 658 Uptime: 7h 35m wakeups: 0 Memory: 30.74 GiB used: 26.06 GiB (84.8%) Init: systemd
v: 249 runlevel: 5 Compilers: gcc: 11.4.0 alt: 11/12/8/9 Client: Cinnamon v: 6.0.4 inxi: 3.3.13
Printer
Doesn't mean
How to reproduce
Create new project.
Insert standard cube.
We will evaluate the upper surface.
Set filament→flow rate to 1. Slice the model.
Switch preview color scheme to "Flow".
Remember the value
Set filament→flow rate to 0.5. Slice the model.
Switch preview color scheme to "Flow".
Compare new value with previous.
Actual results
The values differ by a factor of four
Expected results
The values differ by a factor of two
Project file & Debug log uploads
Note that REAL flows differ by a factor of two. The issue is about preview, not g-code
flow.zip
Checklist of files to include
Anything else?
No response
The text was updated successfully, but these errors were encountered: