Unable to upgrade after falshing Jetpack 6.0

[Eldho1416]

Hi,

I flashed Jetson 6.0 in Jetson Orin NX (8GB) and when i tried to upgrade i'm getting kernerl not cofigured error.

Deatiled log

Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following packages were automatically installed and are no longer required:
  libwpe-1.0-1 libwpebackend-fdo-1.0-1
Use 'sudo apt autoremove' to remove them.
Get more security updates through Ubuntu Pro with 'esm-apps' enabled:
  libheif1 libiperf0 libjs-jquery-ui libopenexr-dev libopenexr25 python3-scipy
  libpostproc55 libswscale-dev libavcodec58 iperf3 libavutil56 libswscale5
  libavutil-dev libswresample3 libavformat58 libavformat-dev libavcodec-dev
  libde265-0 libpmix2 libswresample-dev libavfilter7
Learn more about Ubuntu Pro at https://ubuntu.com/pro
#
# OpenSSH CVE-2024-6387 has been fixed for 22.04 LTS, 23.10 and 24.04 LTS.
# RegreSSHion: Possible RCE Due To A Race Condition In Signal Handling.
# For more details see: https://ubuntu.com/security/notices/USN-6859-1.
#
The following packages have been kept back:
  libopencv-dev python3-update-manager update-manager update-manager-core
0 upgraded, 0 newly installed, 0 to remove and 4 not upgraded.
7 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Setting up nvidia-l4t-kernel (5.15.136-tegra-36.3.0-20240506102626) ...
Using the existing boot entry 'primary'
Warning: Cannot get compatible board name.
3767--0001--1--recomputer-orin-j401-
Info. Active boot storage: nvme0n1
TNSPEC 3767-300-0001-R.1-1-0-recomputer-orin-j401-
COMPATIBLE_SPEC 3767--0001--1--recomputer-orin-j401-
TEGRA_BOOT_STORAGE nvme0n1
TEGRA_CHIPID 0x23
TEGRA_OTA_BOOT_DEVICE /dev/mtdblock0
TEGRA_OTA_GPT_DEVICE /dev/mtdblock0
Info: Write TegraPlatformCompatSpec with 3767--0001--1--recomputer-orin-j401-.
Starting kernel post-install procedure.
Rootfs AB is not enabled.
ERROR. Procedure for A_kernel update FAILED.
Cannot install package. Exiting...
dpkg: error processing package nvidia-l4t-kernel (--configure):
 installed nvidia-l4t-kernel package post-installation script subprocess returned error exit status 1
dpkg: dependency problems prevent configuration of nvidia-l4t-kernel-headers:
 nvidia-l4t-kernel-headers depends on nvidia-l4t-kernel (= 5.15.136-tegra-36.3.0-20240506102626); however:
  Package nvidia-l4t-kernel is not configured yet.

dpkg: error processing package nvidia-l4t-kernel-headers (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of nvidia-l4t-jetson-io:
 nvidia-l4t-jetson-io depends on nvidia-l4t-kernel (>> 5.15.136-tegra-36.3-0); however:
  Package nvidia-l4t-kernel is not configured yet.
 nvidia-l4t-jetson-io depends on nvidia-l4t-kernel (<< 5.15.136-tegra-36.4-0); however:
  Package nvidia-l4t-kernel is not configured yet.

dpkg: error processing package nvidia-l4t-jetson-io (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of nvidia-l4t-kernel-oot-modules:
 nvidia-l4t-kernel-oot-modules depends on nvidia-l4t-kernel (= 5.15.136-tegra-36.3.0-20240506102626); however:
  Package nvidia-l4t-kernel is not configured yet.

dpkg: error processing package nvidia-l4t-kernel-oot-modules (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of nvidia-l4t-display-kernel:
 nvidia-l4t-display-kernel depends on nvidia-l4t-kernel (= 5.15.136-tegra-36.3.0-20240506102626); however:
  Package nvidia-l4t-kernel is not configured yet.

dpkg: error processing package nvidia-l4t-display-kernel (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of nvidia-l4t-kernel-oot-headers:
 nvidia-l4t-kernel-oot-headers depends on nvidia-l4t-kernel (= 5.15.136-tegra-36.3.0-20240506102626); however:
  Package nvidia-l4t-kernel is not configured yet.

dpkg: error processing package nvidia-l4t-kernel-oot-headers (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of nvidia-l4t-kernel-dtbs:
 nvidia-l4t-kernel-dtbs depends on nvidia-l4t-kernel (= 5.15.136-tegra-36.3.0-20240506102626); however:
  Package nvidia-l4t-kernel is not configured yet.

dpkg: error processing package nvidia-l4t-kernel-dtbs (--configure):
 dependency problems - leaving unconfigured
Processing triggers for nvidia-l4t-initrd (36.3.0-20240506102626) ...
nv-update-initrd: Updating /boot/initrd from /etc/nv-update-initrd/modules for kernel version 5.15.136-tegra..
Add /lib/modules/5.15.136-tegra/updates/drivers/net/ethernet/nvidia/nvethernet/nvethernet.ko
Add /lib/modules/5.15.136-tegra/updates/drivers/nvpps/nvpps.ko
Add /lib/modules/5.15.136-tegra/updates/drivers/net/ethernet/realtek/r8168.ko
Add /lib/modules/5.15.136-tegra/modules*
Add /lib/modules/5.15.136-tegra/kernel/drivers/nvme/host/nvme.ko
Add /lib/modules/5.15.136-tegra/kernel/drivers/nvme/host/nvme-core.ko
Add /lib/modules/5.15.136-tegra/kernel/drivers/thermal/tegra/tegra-bpmp-thermal.ko
Add /lib/modules/5.15.136-tegra/kernel/drivers/pwm/pwm-tegra.ko
Add /lib/modules/5.15.136-tegra/kernel/drivers/hwmon/pwm-fan.ko
Add /lib/modules/5.15.136-tegra/kernel/drivers/pci/controller/dwc/pcie-tegra194.ko
Add /lib/modules/5.15.136-tegra/kernel/drivers/phy/tegra/phy-tegra194-p2u.ko
Add /bin/sh
Add /lib/modules/5.15.136-tegra/kernel/drivers/usb/gadget/udc/tegra-xudc.ko
Add /lib/modules/5.15.136-tegra/kernel/drivers/usb/typec/ucsi/typec_ucsi.ko
Add /lib/modules/5.15.136-tegra/kernel/drivers/usb/typec/ucsi/ucsi_ccg.ko
Add /lib/modules/5.15.136-tegra/kernel/drivers/usb/typec/typec.ko
Cleaning up the temporary directory for updating the initrd..
Errors were encountered while processing:
 nvidia-l4t-kernel
 nvidia-l4t-kernel-headers
 nvidia-l4t-jetson-io
 nvidia-l4t-kernel-oot-modules
 nvidia-l4t-display-kernel
 nvidia-l4t-kernel-oot-headers
 nvidia-l4t-kernel-dtbs

Same issue link

[github-actions]

👋 @Eldho1416

Thank you for raising an issue. We will investigate into the matter and get back to you as soon as possible.
Please make sure you have given us as much context as possible.

[yuyoujiang]

Hi Eldho1416, may be you can reflash to jp6. Here is a reference wiki:

https://wiki.seeedstudio.com/reComputer_J4012_Flash_Jetpack/

[Eldho1416]

Hi @yuyoujiang ,

I followed the same guide and I'm facing this problem.

[yuyoujiang]

The new jp6 image has been updated yesterday.

[Eldho1416]

It is working fine now thanks.

[github-actions]

✅ @Eldho1416

This issue is closed, If you have any questions, you can comment and reply.