Skip to content

Latest commit

 

History

History

hdl

Folders and files

NameName
Last commit message
Last commit date

parent directory

..
 
 
 
 
 
 
 
 

bladeRF HDL Source

The Cyclone IV FPGA is at the heart of the bladeRF. It interfaces to the Cypress FX3, Lime Micro LMS6002D RF transceiver, Si5338 clock generator chip, and VCTCXO trim DAC. It has an input to read NMEA from a GPS as well as a 1pps input for time synchronization of signals and has a reference input for a reference clock to tame the VCTCXO. Lastly, it connects directly to the expansion header for controlling GPIO or any other interfaces that may reside on the expansion board.

The HDL is separated out into two different sections:

Directory Description
fpga Source HDL in the form of IP blocks or platform specific top levels
quartus Specific files for Quartus Prime project creation and building

IP, as it is added to the repository, falls under the category of who created the IP. Some IP is created by Intel FPGA (formerly Altera) tools and remains in an altera directory. Some has been written by Nuand or has been downloaded from OpenCores. These blocks should be seen as independent from the platform and, essentially, building blocks for the entire platform.

Currently, the only platform we have is bladeRF. As more platforms come out, more top levels will be created but the same IP should be able to be used with any of those platforms.

Pre-compiled FPGA Binaries

Some FPGA binaries are available for download. Please note the md5 hash as well as the git commit hash.

Required Software

We use an Intel (Altera) Cyclone IV E FPGA. The size of the FPGA is the only difference between the x40 and x115 models. Intel provides their Quartus Prime software for synthesizing designs for their FPGAs. The Lite Edition is free of charge, but not open source, and may require registering on their site to download the software.

Important Note: Be sure to download and install Quartus Prime version 17.1, which the bladeRF project files are based upon. Updates to Quartus Prime are not guaranteed to be reverse-compatible with earlier Quartus versions, nor will future versions necessarily be reverse-compatible.

HDL Structure

Since the FPGA is connected and soldered down to the board, it makes sense to have a single top level which defines where the pins go, their IO levels and their general directionality. We use a single bladerf.vhd top level to define a VHDL entity called bladerf that defines these pins.

We realize people will want to change the internal guts of the FPGA for their own programmable logic reasons. Because of this, we decided to differentiate the implementations using a feature of the Quartus Prime project file called Revisions. Revisions can take a base design (top level entity, a part and pins) and duplicate that project, recording any source level changes you wish to make to the project. This way, a user must only create their own architecture that is the new implementation of the bladerf top level.

This technique can be seen with the currently supported architectures:

Architecture Description
hosted Listens for commands from the USB connection to perform operations or send/receive RF.
atsc_tx ATSC transmittter - Reads 4-bit ATSC symbols via USB and performs pilot insertion, filtering, and baseband shift.

Building the Project

The Quartus Prime build tools supports TCL as a scripting language which we utilize to not only create the project file, but build the system without requiring the need of the GUI. Currently, the build_bladerf.sh performs some environment checks, builds the NIOS BSP and software, and then kicks off TCL scripts to build the FPGA image.

To support multiple versions of Quartus Prime on the same machine and to ensure the environment is appropriately setup, please use the nios2_command_shell.sh script to get into an appropriate Quartus Prime environment. Note that this shell script is usually located in the nios2eds directory of your Quartus Prime install directory. Also note that this is the preferred method regardless of using Windows or Linux to build. If you're using pybombs, make sure you haven't run setup_env.sh, as it prevents nios2_command_shell.sh from working properly.

  1. Take note of which Cyclone device you have. (The EP4CE40 is 40 kLE, and the EP4CE115 is 115 kLE.) You'll need this size below.
  2. Enter the quartus directory
  3. Execute, from inside an appropriate NIOS II command shell, ./build_bladerf.sh -h to view the usage for the build script. Note the size and revision options. Also note any items you'll need to add to your PATH before continuing.
  4. Execute, from inside an appropriate NIOS II command shell, ./build_bladerf.sh -s <size> -r <revision>, with the relevant size for your bladeRF, and the desired revision. This will create the NIOS system and software associated with the FPGA build needed by the internal RAM for execution.
  5. The output of the build will be stored in a directory named in the form, <revision>x<size>-<build time>. This directory will contain the bitstream, summaries, and reports.

Note that there will be a lot of information displayed from notes to critical warnings. Some of these are benign and others are, in fact, critical.

Adding Signal Tap

For advanced users who want to use Signal Tap internal logic analyzer in their design, the build.tcl file can be passed a -stp flag which will add the Signal Tap file to the project before building it:

quartus_sh -t ../build.tcl -rev hosted -size 115 -stp ../signaltap/debug_rx.stp

Note that to use Signal Tap with the Quartus Prime Lite Edition software, the TalkBack feature must be enabled. The build script tries to 'fake' this out by setting the TalkBack feature to be on, compiling the project, then turning it off immediately afterward. If this behavior is not desired, don't try to add a Signal Tap file to the project.