[BUG] HC32 SD Init Fail + Gcode Thumbnail preview not working

[classicrocker883]

Did you test the latest bugfix-2.1.x code?

Yes, and the problem still exists.

Bug Description

@shadow578 SD/Media card will give "fail" message as if card is not inserted.

This occurs sometimes for no real reason. Sometimes it will start normally, and sometimes by removing and reinserting the card it will work fine.

Another thing is the Gcode Thumbnail preview. For some files this will show and work fine, but when selecting to Print it will freeze, and for other files it will freeze right away, the only way to fix is to power off.

Bug Timeline

No response

Expected behavior

Turn on/insert SD card and Gcode Thumbnail preview should start normal

Actual behavior

SD card init fail randomly
Gcode Thumbnail preview fails

Steps to Reproduce

1. Flash firmware for HC32
2. After reboot, says SD/Media Init fail
3. If it doesn't, remove card and reinsert

Version of Marlin Firmware

bugfix-2.1.x

Printer model

Voxelab Aquila HC32

Electronics

No response

LCD/Controller

No response

Other add-ons

No response

Bed Leveling

None

Your Slicer

None

Host Software

None

Don't forget to include

• A ZIP file containing your Configuration.h and Configuration_adv.h.

Additional information & file uploads

HC32configs.zip