PanelDue-3.4.0-pre2

Release Notes 3.4.0-pre2

This release requires RepRapFirmware 3.4 or later.

Version 2 (after August 2016) and Version 3 PanelDue are supported.

Features:

• add cross-platform headless builds based on cmake
• cleaned up dim/screensaver handling
• removed compiler warnings
• enabled Russian localization by default
• enabled Ukrainian localization by default
• improved list-locales tool for translation debugging

Bug fixes:

• fixed displaying of M291 S2 and S3 if followed by M292
• fixed displaying macro buttons in control tab
• fixed setting of serial baud rate after reboot
• cleaned up English
• cleaned up Czech translation
• cleaned up French translation
• cleaned up German translation

Downloads and flashing instructions:

Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.4.0-pre2

Flashing instructions can be found at https://duet3d.dozuki.com/Wiki/PanelDue_Firmware_update

PanelDue-3.4.0-pre1

Release Notes 3.4.0-pre1

This release requires RepRapFirmware 3.4 or later.

Version 2 (after August 2016) and Version 3 PanelDue are supported.

Features:

• add cross-platform headless builds based on cmake
• cleaned up dim/screensaver handling
• removed compiler warnings

Bug fixes:

• fixed displaying of M291 S2 and S3 if followed by M292
• fixed displaying macro buttons in control tab

Downloads and flashing instructions:

Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.4.0-pre1

Flashing instructions can be found at https://duet3d.dozuki.com/Wiki/PanelDue_Firmware_update

PanelDue-3.3.0

Release Notes 3.3.0

This release requires RepRapFirmware 3.3 or later.

Version 2 (after August 2016) and Version 3 PanelDue are supported.

Features:

• added Russian translation
• added support for emerging backlight mp3302 chip
• renamed 'Print' tab into 'Status'
• added slicer time
• added simulated time
• removed layer time
• faster and consistent display of printer status
• display IP address of printer in Setup tab
• adaption to changes of object model
• allow assignment of fans, extruders and heaters to multipls beds, chambers or tools
• added debugging interface to write debugging information as gcode comments to the reprap uart
• increase request timeouts to constant 2s
• added support for new printer state cancelling
• deactivate screensaver when a new M291 message arrives; S0 and S1 leave the screensaver active, S2 and S3 leave screensaver deactivated until user action

Bug fixes:

• gracefully handle parsing errors in M409 K"" requests
• show warning instead of error when JSON parsing errors occur
• fix displaying of percent sign
• fix displaying of M291 dialogs
• fix sending filename in M37
• fix unresponsive screen when showing m291 message while screensaver is active
• fix updating of simulated time left during print
• fix displaying of standby temperature row
• fix state reporting in JSON parser warning
• fix polling interval handling of printer

Downloads and flashing instructions:

Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.3.0

Flashing instructions can be found at https://duet3d.dozuki.com/Wiki/PanelDue_Firmware_update

PanelDue-3.3.0-rc6

Release Notes 3.3.0-rc6

This release requires RepRapFirmware 3.3 or later.

Version 2 (after August 2016) and Version 3 PanelDue are supported.

Features:

• added Russian translation
• added support for emerging backlight mp3302 chip
• renamed 'Print' tab into 'Status'
• added slicer time
• added simulated time
• removed layer time
• faster and consistent display of printer status
• display IP address of printer in Setup tab
• adaption to changes of object model
• allow assignment of fans, extruders and heaters to multipls beds, chambers or tools
• added debugging interface to write debugging information as gcode comments to the reprap uart
• increase request timeouts to constant 2s
• added support for new printer state cancelling
• deactivate screensaver when a new M291 message arrives; S0 and S1 leave the screensaver active, S2 and S3 leave screensaver deactivated until user action

Bug fixes:

• gracefully handle parsing errors in M409 K"" requests
• show warning instead of error when JSON parsing errors occur
• fix displaying of percent sign
• fix displaying of M291 dialogs
• fix sending filename in M37
• fix unresponsive screen when showing m291 message while screensaver is active
• fix updating of simulated time left during print
• fix displaying of standby temperature row
• fix state reporting in JSON parser warning
• fix polling interval handling of printer

Downloads and flashing instructions:

Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.3.0-rc6

Flashing instructions can be found at https://duet3d.dozuki.com/Wiki/PanelDue_Firmware_update

3.3.0-rc5

Release Notes 3.3.0-rc5

This release requires RepRapFirmware 3.3 or later.

Version 2 (after August 2016) and Version 3 PanelDue are supported.

Features:

• added Russian translation
• added support for emerging backlight mp3302 chip
• renamed 'Print' tab into 'Status'
• added slicer time
• added simulated time
• removed layer time
• faster and consistent display of printer status
• display IP address of printer in Setup tab
• adaption to changes of object model
• allow assignment of fans, extruders and heaters to multipls beds, chambers or tools
• added debugging interface to write debugging information as gcode comments to the reprap uart
• increase request timeouts to constant 2s
• added support for new printer state cancelling
• deactivate screensaver when a new M291 message arrives; S0 and S1 leave the screensaver active, S2 and S3 leave screensaver deactivated until user action

Bug fixes:

• gracefully handle parsing errors in M409 K"" requests
• show warning instead of error when JSON parsing errors occur
• fix displaying of percent sign
• fix displaying of M291 dialogs
• fix sending filename in M37
• fix unresponsive screen when showing m291 message while screensaver is active
• fix updating of simulated time left during print
• fix displaying of standby temperature row
• fix state reporting in JSON parser warning

Downloads and flashing instructions:

Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.3.0-rc5

Flashing instructions can be found at https://duet3d.dozuki.com/Wiki/PanelDue_Firmware_update

3.3.0-rc4

Release Notes 3.3.0-rc4

This release requires RepRapFirmware 3.3 or later.

Version 2 (after August 2016) and Version 3 PanelDue are supported.

Features:

• added Russian translation
• added support for emerging backlight mp3302 chip
• renamed 'Print' tab into 'Status'
• added slicer time
• added simulated time
• removed layer time
• faster and consistent display of printer status
• display IP address of printer in Setup tab
• adaption to changes of object model
• allow assignment of fans, extruders and heaters to multipls beds, chambers or tools
• added debugging interface to write debugging information as gcode comments to the reprap uart
• increase request timeouts to constant 2s

Bug fixes:

• gracefully handle parsing errors in M409 K"" requests
• show warning instead of error when JSON parsing errors occur
• fix displaying of percent sign
• fix displaying of M291 dialogs
• fix sending filename in M37
• fix unresponsive screen when showing m291 message while screensaver is active
• fix updating of simulated time left during print
• fix displaying of standby temperature row
• fix state reporting in JSON parser warning

Downloads and flashing instructions:

Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.3.0-rc4

Flashing instructions can be found at https://duet3d.dozuki.com/Wiki/PanelDue_Firmware_update

3.3.0-rc3

Release Notes 3.3.0-rc3

This release requires RepRapFirmware 3.3 or later.

Version 2 (after August 2016) and Version 3 PanelDue are supported.

Features:

• added Russian translation
• added support for emerging backlight mp3302 chip
• renamed 'Print' tab into 'Status'
• added slicer time
• added simulated time
• removed layer time
• faster and consistent display of printer status
• display IP address of printer in Setup tab
• adaption to changes of object model
• allow assignment of fans, extruders and heaters to multipls beds, chambers or tools
• added debugging interface to write debugging information as gcode comments to the reprap uart

Bug fixes:

• gracefully handle parsing errors in M409 K"" requests
• show warning instead of error when JSON parsing errors occur
• fix displaying of percent sign
• fix displaying of M291 dialogs
• fix sending filename in M37
• fix unresponsive screen when showing m291 message while screensaver is active
• fix updating of simulated time left during print

Downloads and flashing instructions:

Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.3.0-rc2

Flashing instructions can be found at https://duet3d.dozuki.com/Wiki/PanelDue_Firmware_update

3.3.0-rc2

Release Notes 3.3.0-rc2

This release requires RepRapFirmware 3.3 or later.

Version 2 (after August 2016) and Version 3 PanelDue are supported.

Features:

• added Russian translation
• added support for emerging backlight mp3302 chip
• renamed 'Print' tab into 'Status'
• added slicer time
• added simulated time
• removed layer time
• faster and consistent display of printer status
• display IP address of printer in Setup tab
• adaption to changes of object model
• allow assignment of fans, extruders and heaters to multipls beds, chambers or tools

Bug fixes:

• gracefully handle parsing errors in M409 K"" requests
• show warning instead of error when JSON parsing errors occur
• fix displaying of percent sign
• fix displaying of M291 dialogs
• fix sending filename in M37

Downloads and flashing instructions:

Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.3.0-rc2

Flashing instructions can be found at https://duet3d.dozuki.com/Wiki/PanelDue_Firmware_update

3.3.0-rc1

Release Notes 3.3.0-rc1

This release requires RepRapFirmware 3.3 or later.

Version 2 (after August 2016) and Version 3 PanelDue are supported.

Features:

• added Russian translation
• added support for emerging backlight mp3302 chip
• renamed 'Print' tab into 'Status'
• added slicer time
• added simulated time
• removed layer time
• faster and consistent display of printer status
• display IP address of printer in Setup tab
• adaption to changes of object model
• allow assignment of fans, extruders and heaters to multipls beds, chambers or tools

Bug fixes:

• gracefully handle parsing errors in M409 K"" requests
• show warning instead of error when JSON parsing errors occur
• fix displaying of percent sign
• fix displaying of M291 dialogs

Downloads and flashing instructions:

Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.3.0-rc1
Flashing instructions can be found at https://duet3d.dozuki.com/Wiki/PanelDue_Firmware_update

Version 3.2.11

This is a pure bugfix release to address issues on setups with multiple fans/extruders assigned to multiple tools.

Version 3.2.11

Upgrade Notes:

• This release is compatible with RepRapFirmware 3.2 or later.

Bug fixes:

• When multiple tools used the same extruder or fan only the first tool using it was considered
• When multiple beds/chambers used the same heater status was only updated for the first one