diff --git a/CHANGELOG.md b/CHANGELOG.md
index 8145ff1db7..2fd1bb4cac 100644
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -4,6 +4,8 @@ Here's all notable changes and commits to both the configuration repo and the ba
 Many thanks to all those who have submitted issues and pull requests to make this firmware better!
 ## Config repo
 
+20/10/2023 - Disable BLE privacy due to conflict, disable BLE battery reporting, change to point to new ZMK branch with minor update. Please note that due to the minor update the boards will need the [settings_reset.uf2](/settings-reset.uf2) file flashing onto each side prior to updating [#248](https://github.com/KinesisCorporation/Adv360-Pro-ZMK/pull/248) (adv360-z3.2-2)
+
 10/9/2023 - Further documentation refinements, add section on beta testing, document BLE privacy [#241](https://github.com/KinesisCorporation/Adv360-Pro-ZMK/pull/241)
 
 10/9/2023 - Change build actions to fix warnings from shellcheck [#242](https://github.com/KinesisCorporation/Adv360-Pro-ZMK/pull/242)
@@ -67,13 +69,23 @@ Many thanks to all those who have submitted issues and pull requests to make thi
 
 ## Base ZMK
 
-There have beeen 3 mainline branches of ZMK used for the 360 Pro so far. Beta branches are not changelogged as they are subject to frequent changes and tweaks.
+There have beeen 4 branches of ZMK used for the 360 Pro so far. Beta branches are not changelogged as they are subject to frequent changes and tweaks.
 
 | Branch | Date From | Date To | Config Branch |
 | -------- | ------- |-------|-----|
 | [adv360-beta](https://github.com/ReFil/zmk/tree/adv360-beta)   | 3/1/2022 | 9/17/2022 | V1.0 (since deleted) |
-| [adv360-z3](https://github.com/ReFil/zmk/tree/adv360-z3) | 9/17/2022 | 7/6/2023 | [V2.0](https://github.com/KinesisCorporation/Adv360-Pro-ZMK/tree/V2.0) |
-| [adv360-z3.2](https://github.com/ReFil/zmk/tree/adv360-z3.2) | 7/6/2023 | To date | [V3.0](https://github.com/KinesisCorporation/Adv360-Pro-ZMK/tree/V3.0) |
+| [adv360-z3](https://github.com/ReFil/zmk/tree/adv360-z3) | 9/17/2022 | 7/6/2023 | V2.0 (since deleted) |
+| [adv360-z3.2](https://github.com/ReFil/zmk/tree/adv360-z3.2) | 7/6/2023 | 20/10/2023 | [V3.0](https://github.com/KinesisCorporation/Adv360-Pro-ZMK/tree/V3.0) (Up to commit 82494e7) |
+| [adv360-z3.2-2](https://github.com/ReFil/zmk/tree/adv360-z3.2-2) | 20/10/2023 | To date | [V3.0](https://github.com/KinesisCorporation/Adv360-Pro-ZMK/tree/V3.0) (current) |
+
+
+### adv360-z3.2-2
+
+10/18/2023 - Disable saving certain RGB elements to flash memory to help with flash wear
+
+10/18/2023 - Re-enable BLE battery reporting in code (now disabled in config repo using the `CONFIG_BT_BAS` KConfig option)
+
+10/18/2023 - Merge latest upstream ZMK (Commit 7fe9ecd8)
 
 ### adv360-z3.2
 
diff --git a/README.md b/README.md
index a732332897..359b194dd0 100644
--- a/README.md
+++ b/README.md
@@ -70,7 +70,10 @@ If you are upgrading from V2 to V3, and if the flashing didn't work as expected
 the V3 branch of this repository. After doing this, proceed with the flashing instructions above.
 
 ## Bluetooth LE Privacy
-By default this firmware ships with BT Privacy enabled (To read more about BT privacy see [this article](https://novelbits.io/how-to-protect-the-privacy-of-your-bluetooth-low-energy-device/)). This was done based off feedback from MacOS users as some Macs and all iOS devices use resolvable private addresses that they cycle between (the Apple documentation can be found [here](https://developer.apple.com/accessories/Accessory-Design-Guidelines.pdf#page=194)), and when the host cycled to a new address the Advantage 360 Pro would need re-pairing. It can cause issues with some operating systems and hardware setups. To disable BT Privacy change `CONFIG_BT_PRIVACY=y` to `CONFIG_BT_PRIVACY=n` in [adv360_left_defconfig](config/boards/arm/adv360/adv360_left_defconfig#L52). Disabling this might necessitate re-pairing to the host.
+
+Since the update on 20/10/2023, BLE privacy is now disabled by default and due to an update in upstream ZMK cannot be enabled again as it will cause issues for the splits halves connecting to each other.
+
+~~By default this firmware ships with BT Privacy enabled (To read more about BT privacy see [this article](https://novelbits.io/how-to-protect-the-privacy-of-your-bluetooth-low-energy-device/)). This was done based off feedback from MacOS users as some Macs and all iOS devices use resolvable private addresses that they cycle between (the Apple documentation can be found [here](https://developer.apple.com/accessories/Accessory-Design-Guidelines.pdf#page=194)), and when the host cycled to a new address the Advantage 360 Pro would need re-pairing. It can cause issues with some operating systems and hardware setups. To disable BT Privacy change `CONFIG_BT_PRIVACY=y` to `CONFIG_BT_PRIVACY=n` in [adv360_left_defconfig](config/boards/arm/adv360/adv360_left_defconfig#L52). Disabling this might necessitate re-pairing to the host.~~
 
 ## Changelog
 
diff --git a/config/boards/arm/adv360/adv360_left_defconfig b/config/boards/arm/adv360/adv360_left_defconfig
index 33ef88e964..4482de2d6f 100644
--- a/config/boards/arm/adv360/adv360_left_defconfig
+++ b/config/boards/arm/adv360/adv360_left_defconfig
@@ -49,12 +49,13 @@ CONFIG_ZMK_BACKLIGHT_AUTO_OFF_IDLE=y
 #BT configuration
 CONFIG_BT_CTLR_TX_PWR_PLUS_8=y
 CONFIG_BT_DIS_MANUF="Kinesis Corporation"
-CONFIG_BT_PRIVACY=y
+CONFIG_BT_PRIVACY=n
 CONFIG_BT_GAP_PERIPHERAL_PREF_PARAMS=y
 CONFIG_BT_PERIPHERAL_PREF_TIMEOUT=600
 CONFIG_BT_PERIPHERAL_PREF_MIN_INT=12
 CONFIG_BT_PERIPHERAL_PREF_MAX_INT=24
 CONFIG_BT_PERIPHERAL_PREF_LATENCY=30
+CONFIG_BT_BAS=n #Set this to y to enable BLE battery reporting
 
 #Misc configuration
 CONFIG_USB_DEVICE_VID=0x29EA
diff --git a/config/west.yml b/config/west.yml
index 3d195d83e0..ceaefbfcb0 100644
--- a/config/west.yml
+++ b/config/west.yml
@@ -7,7 +7,7 @@ manifest:
   projects:
     - name: zmk
       remote: refil
-      revision: adv360-z3.2
+      revision: adv360-z3.2-2
       import: app/west.yml
   self:
     path: config