ameba-rtos-z2

GitHub ameba-rtos-z2 repository is the development framework for AmebaZ2 and AmebaZ2Plus SOCs.

Supported SoCs

Chip	Project
AmebaZ2	/project/realtek_amebaz2_v0_example
AmebaZ2Plus	/project/realtek_amebaz2plus_v0_example

Documentation

• 📚 Application Notes
• 📚 Z2 Datasheet
• 📚 Z2plus Datasheet

Setup Build Environments

GCC Environment on Windows

On Windows, you can use Cygwin as the GCC environment. Cygwin is a large collection of GNU and Open Source tools which provide the similar functionality as a Linux distribution on Windows. Please visit the official website of Cygwin and install the software.

Note:

• Please use Cygwin 32-bit version.
• During the Cygwin installation, please install "math -> bc" and "devel -> make".

GCC Environment on Linux

On Linux, please install packages for the GCC environment.

• Use command apt-get install make to install "make".
• Use command apt-get install bc to install "bc".

Configure the Project

• For general configurations, you can configure the options in "platform_opts.h".
• For BT configurations, you can configure the options in "platform_opts_bt.h".

Compile the Project

1. Open the Cygwin Terminal or Linux terminal.
2. Direct to compile path. Execute command cd /project/.../GCC-RELEASE.
3. Clean up pervious compilation files. Execute command make clean.
4. Build the SDK. Execute command make all.
5. Make sure there is no error after compilation.

Download image

After a successfully compilation, the images partition.bin, bootloader.bin, firmware_is.bin and flash_is.bin can be seen in the folder/sub-folder of /GCC-RELEASE.

• partition.bin stores partition table, recording the address of Boot image and firmware image;
• bootloader.bin is bootloader image;
• firmware_is.bin is application image;
• flash_is.bin links partition.bin, bootloader.bin and firmware_is.bin.

To download image to board, you can either

• Directly download the image binary to board from GCC (J-Link debugger is required), please check the ApplicationNote chapter SDK Build Environment Setup for more details.
• Or using the PG tool for Ameba-ZII (in /tools/AmebaZ2), please check the ApplicationNote chapter Image Tool for more details.

Release Notes

Vesion Sync

GitHub ameba-rtos-z2 is currently synchronized with 7.1 GIT 240830_26dad548.