hardware-interfaces/sdio/

[giscus[bot]]

hardware-interfaces/sdio/

Introduction

https://documentation.onioniot.com/hardware-interfaces/sdio/

[JL1306]

Clean install 23.05 on omega2+.
SD card is automatically mounted as /mnt/mmcblk0p1.

How to increase overlayfs:/overlay Size 25.0M Used 752.0K Available 24.3M?
Looks like default overlay is still in MMC. How to change to SD card and increase?
Have tried old instructions from old firmware but no success, is there compatibility issue between old firmware instructions and new wrt 23.05?

[greenbreakfast]

We haven't tested the old instructions on pivoting the overlay to an SD card with the new firmware, so it's possible it won't work.

What sort of use case are you looking to support where you need more storage for the overlay? And how much additional storage do you need?

[TT-E1NFACH]

You can use this for expanding filesystem:

https://yoursunny.com/t/2019/omega2pro-openwrt/

[TT-E1NFACH]

But first you need to unmount : umount /dev/mmcblk0p1
And when using fdisk, first delete the existing partition with the d command.

Im not able to edit my previous post so i post another comment...

[TT-E1NFACH]

You can use this for expanding filesystem:

https://yoursunny.com/t/2019/omega2pro-openwrt/