diff --git a/content/en/docs/2025.5/Guides/upgrade-guides/upgrade-cortex/2024.7-to-2024.9/multiple-server-with-ha/upgrade-web-application-server/upgrade-gateway.md b/content/en/docs/2025.5/Guides/upgrade-guides/upgrade-cortex/2024.7-to-2024.9/multiple-server-with-ha/upgrade-web-application-server/upgrade-gateway.md index 32fde9b32..9200d3122 100644 --- a/content/en/docs/2025.5/Guides/upgrade-guides/upgrade-cortex/2024.7-to-2024.9/multiple-server-with-ha/upgrade-web-application-server/upgrade-gateway.md +++ b/content/en/docs/2025.5/Guides/upgrade-guides/upgrade-cortex/2024.7-to-2024.9/multiple-server-with-ha/upgrade-web-application-server/upgrade-gateway.md @@ -45,7 +45,7 @@ This guide describes how to upgrade {{% ctx %}} Gateway from 2024.7 to 2024.9. P * Click on the drop down menu for `Code` and select `Restart`. Confirm application restart by following the on-screen instructions. * Give this a few minutes. Once all nodes have been restarted the application should be deleted and disappear from the list of applications. -Repeat the above instructions for the `Flow Debugger`. In step 2 `server.domain.com` is the fully qualified domain name of the web application server. +Repeat the above instructions for the `Flow Debugger`. In step 2 `server.domain.com` is the fully qualified domain name of the web application server. ## Preserve installation files diff --git a/content/en/docs/2025.5/Guides/upgrade-guides/upgrade-cortex/2024.9.25161-to-2025.3/single-server-without-ha/upgrade/upgrade-web-application-server/upgrade-gateway.md b/content/en/docs/2025.5/Guides/upgrade-guides/upgrade-cortex/2024.9.25161-to-2025.3/single-server-without-ha/upgrade/upgrade-web-application-server/upgrade-gateway.md index 7bc6fbb26..a723639da 100644 --- a/content/en/docs/2025.5/Guides/upgrade-guides/upgrade-cortex/2024.9.25161-to-2025.3/single-server-without-ha/upgrade/upgrade-web-application-server/upgrade-gateway.md +++ b/content/en/docs/2025.5/Guides/upgrade-guides/upgrade-cortex/2024.9.25161-to-2025.3/single-server-without-ha/upgrade/upgrade-web-application-server/upgrade-gateway.md @@ -32,7 +32,7 @@ This guide describes how to upgrade {{% ctx %}} Gateway from 2024.9.25161 to 202 * Click on the drop down menu for `Code` and select `Restart`. Confirm application restart by following the on-screen instructions. * Give this a few minutes. Once all nodes have been restarted the application should be deleted and disappear from the list of applications. -Repeat the above instructions for the `Flow Debugger`. In step 2 `server.domain.com` is the fully qualified domain name of the web application server. +Repeat the above instructions for the `Flow Debugger`. In step 2 `server.domain.com` is the fully qualified domain name of the web application server. ## Republish Packages diff --git a/content/en/docs/2025.5/Guides/upgrade-guides/upgrade-cortex/2025.1-to-2025.3/multiple-server-with-ha/upgrade/upgrade-web-application-server/upgrade-gateway.md b/content/en/docs/2025.5/Guides/upgrade-guides/upgrade-cortex/2025.1-to-2025.3/multiple-server-with-ha/upgrade/upgrade-web-application-server/upgrade-gateway.md index c87c7cb96..9f18c8580 100644 --- a/content/en/docs/2025.5/Guides/upgrade-guides/upgrade-cortex/2025.1-to-2025.3/multiple-server-with-ha/upgrade/upgrade-web-application-server/upgrade-gateway.md +++ b/content/en/docs/2025.5/Guides/upgrade-guides/upgrade-cortex/2025.1-to-2025.3/multiple-server-with-ha/upgrade/upgrade-web-application-server/upgrade-gateway.md @@ -34,7 +34,7 @@ This guide describes how to upgrade {{% ctx %}} Gateway from 2025.1 to 2025.3. P * Click on the drop down menu for `Code` and select `Restart`. Confirm application restart by following the on-screen instructions. * Give this a few minutes. Once all nodes have been restarted the application should be deleted and disappear from the list of applications. -Repeat the above instructions for the `Flow Debugger`. In step 2 `server.domain.com` is the fully qualified domain name of the web application server. +Repeat the above instructions for the `Flow Debugger`. In step 2 `server.domain.com` is the fully qualified domain name of the web application server. ## Republish Packages diff --git a/content/en/docs/2025.5/Guides/upgrade-guides/upgrade-cortex/2025.1-to-2025.3/single-server-without-ha/upgrade/upgrade-web-application-server/upgrade-gateway.md b/content/en/docs/2025.5/Guides/upgrade-guides/upgrade-cortex/2025.1-to-2025.3/single-server-without-ha/upgrade/upgrade-web-application-server/upgrade-gateway.md index e45a01d70..eeef65ee3 100644 --- a/content/en/docs/2025.5/Guides/upgrade-guides/upgrade-cortex/2025.1-to-2025.3/single-server-without-ha/upgrade/upgrade-web-application-server/upgrade-gateway.md +++ b/content/en/docs/2025.5/Guides/upgrade-guides/upgrade-cortex/2025.1-to-2025.3/single-server-without-ha/upgrade/upgrade-web-application-server/upgrade-gateway.md @@ -32,7 +32,7 @@ This guide describes how to upgrade {{% ctx %}} Gateway from 2025.1 to 2025.3. P * Click on the drop down menu for `Code` and select `Restart`. Confirm application restart by following the on-screen instructions. * Give this a few minutes. Once all nodes have been restarted the application should be deleted and disappear from the list of applications. -Repeat the above instructions for the `Flow Debugger`. In step 2 `server.domain.com` is the fully qualified domain name of the web application server. +Repeat the above instructions for the `Flow Debugger`. In step 2 `server.domain.com` is the fully qualified domain name of the web application server. ## Republish Packages diff --git a/content/en/docs/2025.5/Guides/upgrade-guides/upgrade-cortex/2025.3-to-2025.5/multiple-server-with-ha/upgrade/upgrade-application-and-loadbalancer-servers.md b/content/en/docs/2025.5/Guides/upgrade-guides/upgrade-cortex/2025.3-to-2025.5/multiple-server-with-ha/upgrade/upgrade-application-and-loadbalancer-servers.md index c61b5c9b1..4094936d1 100644 --- a/content/en/docs/2025.5/Guides/upgrade-guides/upgrade-cortex/2025.3-to-2025.5/multiple-server-with-ha/upgrade/upgrade-application-and-loadbalancer-servers.md +++ b/content/en/docs/2025.5/Guides/upgrade-guides/upgrade-cortex/2025.3-to-2025.5/multiple-server-with-ha/upgrade/upgrade-application-and-loadbalancer-servers.md @@ -65,7 +65,7 @@ To check the previous configuration values open the `Cortex.Upgrade.ApplicationC ### Disable Code Analyser -On each of the the Application Servers: +On each of the Application Servers: {{< section "/upgrade/2025.5/upgrade-application-server/multi-server/disable-code-analyser.md" >}} diff --git a/content/en/docs/2025.5/Guides/user-guides/user-interfaces/gateway/dev/flow-editor/bottom-panel/executions-grid.md b/content/en/docs/2025.5/Guides/user-guides/user-interfaces/gateway/dev/flow-editor/bottom-panel/executions-grid.md index ffc9608ce..0d5f82c13 100644 --- a/content/en/docs/2025.5/Guides/user-guides/user-interfaces/gateway/dev/flow-editor/bottom-panel/executions-grid.md +++ b/content/en/docs/2025.5/Guides/user-guides/user-interfaces/gateway/dev/flow-editor/bottom-panel/executions-grid.md @@ -41,7 +41,7 @@ See the [Step the Execution][Step the Execution tutorial] tutorial for a step-by ### Stop the Execution -Clicking the {{< image src="/images/Flow Editor - Stop Execution.png" >}} icon stops the the selected executions, and after a few seconds, removes them from Executions Grid. This action is available for all executions, regardless of their state. +Clicking the {{< image src="/images/Flow Editor - Stop Execution.png" >}} icon stops the selected executions, and after a few seconds, removes them from Executions Grid. This action is available for all executions, regardless of their state. See the [Continue and Stop the Execution][Continue and Stop the Execution tutorial] tutorial for a step-by-step guide. diff --git a/content/en/docs/2025.5/Reference/Blocks/Text/contains-text/contains-any-text-block.md b/content/en/docs/2025.5/Reference/Blocks/Text/contains-text/contains-any-text-block.md index 35cf47be0..4c4704b42 100644 --- a/content/en/docs/2025.5/Reference/Blocks/Text/contains-text/contains-any-text-block.md +++ b/content/en/docs/2025.5/Reference/Blocks/Text/contains-text/contains-any-text-block.md @@ -217,7 +217,7 @@ For information about the [supported values][ComparisonTypes] for the [Compariso ### Null or empty Text -If [Text][Text Property] is `null` or empty (i.e. `""`), the variable specified in the [Contains Any Text][ContainsAnyText Property] property is set to `false`. +If [Text][Text Property] is `null` or empty (i.e. `""`), the variable specified in the [Contains Any Text][ContainsAnyText Property] property is set to `false`. ### Null or empty Texts To Find diff --git a/content/en/docs/2025.5/Reference/Blocks/Text/contains-text/contains-text-block.md b/content/en/docs/2025.5/Reference/Blocks/Text/contains-text/contains-text-block.md index 5d43abc66..be03f530b 100644 --- a/content/en/docs/2025.5/Reference/Blocks/Text/contains-text/contains-text-block.md +++ b/content/en/docs/2025.5/Reference/Blocks/Text/contains-text/contains-text-block.md @@ -216,7 +216,7 @@ For information about the [supported values][ComparisonTypes] for the [Compariso ### Null or empty Text -If [Text][Text Property] is `null` or empty (i.e. `""`), the variable specified in the [Contains Text][ContainsText Property] property is set to `false`. +If [Text][Text Property] is `null` or empty (i.e. `""`), the variable specified in the [Contains Text][ContainsText Property] property is set to `false`. ### Null or empty Text To Find diff --git a/content/en/docs/2025.5/Reference/Blocks/data-storage/wait-for-key-in-collection/wait-for-key-in-collection-to-contain-value-block.md b/content/en/docs/2025.5/Reference/Blocks/data-storage/wait-for-key-in-collection/wait-for-key-in-collection-to-contain-value-block.md index 298f37e0e..3aee09187 100644 --- a/content/en/docs/2025.5/Reference/Blocks/data-storage/wait-for-key-in-collection/wait-for-key-in-collection-to-contain-value-block.md +++ b/content/en/docs/2025.5/Reference/Blocks/data-storage/wait-for-key-in-collection/wait-for-key-in-collection-to-contain-value-block.md @@ -36,7 +36,7 @@ In this example `"users"` already exists and contains the following keys and dat #### Result -Waiting for `"user2"` to contain [Value][Value Property] `{"Domain": "domain", "Username": "admin", "Password": "encryptedPassword"}` in the [Data Storage Collection][] results in the execution waiting until the the key `"user2"` contains the desired [Value][Value Property]; see [Write Data With Key][Write Data With Key]. +Waiting for `"user2"` to contain [Value][Value Property] `{"Domain": "domain", "Username": "admin", "Password": "encryptedPassword"}` in the [Data Storage Collection][] results in the execution waiting until the key `"user2"` contains the desired [Value][Value Property]; see [Write Data With Key][Write Data With Key]. *** diff --git a/content/en/docs/2025.5/Reference/Blocks/email/send-email/send-email-using-smtp-server-block.md b/content/en/docs/2025.5/Reference/Blocks/email/send-email/send-email-using-smtp-server-block.md index 0c903c68e..e7eb35acb 100644 --- a/content/en/docs/2025.5/Reference/Blocks/email/send-email/send-email-using-smtp-server-block.md +++ b/content/en/docs/2025.5/Reference/Blocks/email/send-email/send-email-using-smtp-server-block.md @@ -390,7 +390,7 @@ If `null` is provided as a file path in the [Attachments][] within the [Email Me #### Empty file path -If an empty string is provided as a file path in the the [Attachments][] within the [Email Message][Email Message Property], an [ArgumentException][] is thrown. +If an empty string is provided as a file path in the [Attachments][] within the [Email Message][Email Message Property], an [ArgumentException][] is thrown. #### File path does not exist diff --git a/content/en/docs/2025.5/Reference/Blocks/google-workspace/gmail/send-email/send-email-using-gmail-block.md b/content/en/docs/2025.5/Reference/Blocks/google-workspace/gmail/send-email/send-email-using-gmail-block.md index 2862a63b3..025d04ad8 100644 --- a/content/en/docs/2025.5/Reference/Blocks/google-workspace/gmail/send-email/send-email-using-gmail-block.md +++ b/content/en/docs/2025.5/Reference/Blocks/google-workspace/gmail/send-email/send-email-using-gmail-block.md @@ -450,7 +450,7 @@ If `null` is provided as a file path in the [Attachments][] within the [Email Me #### Empty file path -If an empty string is provided as a file path in the the [Attachments][] within the [Email Message][Email Message Property], an [ArgumentException][] is thrown. +If an empty string is provided as a file path in the [Attachments][] within the [Email Message][Email Message Property], an [ArgumentException][] is thrown. #### File path does not exist diff --git a/content/en/docs/2025.5/Reference/Concepts/fundamentals/blocks/block-properties/property-editors/literal-editor.md b/content/en/docs/2025.5/Reference/Concepts/fundamentals/blocks/block-properties/property-editors/literal-editor.md index b98c07f71..81c2e7934 100644 --- a/content/en/docs/2025.5/Reference/Concepts/fundamentals/blocks/block-properties/property-editors/literal-editor.md +++ b/content/en/docs/2025.5/Reference/Concepts/fundamentals/blocks/block-properties/property-editors/literal-editor.md @@ -18,7 +18,7 @@ TODO TODO: - The literal editor will have one or more available types, these types will be either Complex or Basic Types -- The types available to the literal editor are restricted by the block property. +- The types available to the literal editor are restricted by the block property. - It is possible to switch the type of the literal editor to any available type. ### Basic Types diff --git a/content/en/docs/2025.5/Reference/Concepts/fundamentals/variables/using-variables.md b/content/en/docs/2025.5/Reference/Concepts/fundamentals/variables/using-variables.md index bfeff30e7..cbb032356 100644 --- a/content/en/docs/2025.5/Reference/Concepts/fundamentals/variables/using-variables.md +++ b/content/en/docs/2025.5/Reference/Concepts/fundamentals/variables/using-variables.md @@ -16,7 +16,7 @@ There are a number of ways to use variables: ## Variable Editor -The [Variable Editor][] allows the the developer to [create][] and [use][] variables whilst configuring a [block][]. +The [Variable Editor][] allows the developer to [create][] and [use][] variables whilst configuring a [block][]. ### Creating a Variable diff --git a/content/en/docs/2025.5/_shared/install-application-server/configure-code-analyser.md b/content/en/docs/2025.5/_shared/install-application-server/configure-code-analyser.md new file mode 100644 index 000000000..94cd07907 --- /dev/null +++ b/content/en/docs/2025.5/_shared/install-application-server/configure-code-analyser.md @@ -0,0 +1,8 @@ +A Code Analyser used to restrict what C# code can be executed from flows within {{% ctx %}} has been installed. It is enabled and secure by default, restricting all C# data types and namespaces other than those required to run an empty flow. + +{{% alert title="Warning" color="warning" %}}This security feature WILL prevent any flows, other than an empty flow, from running.{{< /alert >}} + +It can either be [disabled][Disable Code Analyser], or it's configured Allowed list can be [updated][Update Code Analyser] to allow required C# data types and namespaces. + +[Update Code Analyser]: {{< ref "#update-code-analyser-allowed-list" >}} +[Disable Code Analyser]: {{< ref "#disable-code-analyser" >}} diff --git a/content/en/docs/2025.5/_shared/install-application-server/multi-server/add-innovation-only/disable-code-analyser.md b/content/en/docs/2025.5/_shared/install-application-server/multi-server/add-innovation-only/disable-code-analyser.md new file mode 100644 index 000000000..834cc4ddc --- /dev/null +++ b/content/en/docs/2025.5/_shared/install-application-server/multi-server/add-innovation-only/disable-code-analyser.md @@ -0,0 +1,18 @@ +1. Open a File Explorer. +1. Navigate to the Execution service directory, e.g. `%ProgramData%\SF\.\Fabric\work\Applications\Cortex.Innovation.Execution_App\ExecutionPkg.Code.27.3.0.25260` replacing `` with the `CustomerName` configured during [installation][Configure Installation Script], `` with the NETBIOS name of the server and `` with the highest number in the directory. +1. Open the `appsettings.json` file in a text editor. +1. Locate the `"FeatureFlags"` line located under `"ExecutionEngine"` and set the value to `["f4fd94c0-a921-4b34-b82c-378b05e91555"]`. +1. Save and close the file. +1. In the File Explorer, navigate to `%ProgramData%\SF\.\Fabric\work\ImageCache\Store\Cortex.Innovation.Execution\ExecutionPkg.Code.27.3.0.25260` replacing `` with the Customer Name and `` with the NETBIOS name of the server specified in step 2. +1. Repeat steps 3 - 5. +1. Open a web browser. +1. Navigate to `https://server.domain.com:9080/Explorer`, where `server.domain.com` is the fully qualified domain name of the server. Replace `9080` with new `httpGatewayEndpointPort` value if it was changed during configuration of the original installation. + + {{% alert title="Note" %}} +If a certificate error occurs, it will be necessary to import the client certificate used in the `ClientCertificatePath` parameter when {{< ahref path="Cortex.GettingStarted.OnPremise.InstallInnovationOnly.MultipleServerWithHA.ConfigureInstallationScriptNew" title="Configuring the Installation Script" >}}. Instructions on how to do this can be found {{< ahref path="Cortex.Faqs.ImportClientCertificate.MultiServer" title="here" >}}. + {{% /alert %}} + +1. Expand `Cluster` then `Nodes`. +1. Restart the node by clicking on the drop down menu next to the node name and select `Restart`. Confirm node restart by following the on-screen instructions. + +[Configure Installation Script]: {{< ref "#configure-installation-script" >}} diff --git a/content/en/docs/2025.5/_shared/install-application-server/multi-server/add-innovation-only/disable-debugger-code-analyser.md b/content/en/docs/2025.5/_shared/install-application-server/multi-server/add-innovation-only/disable-debugger-code-analyser.md new file mode 100644 index 000000000..09dfa0d69 --- /dev/null +++ b/content/en/docs/2025.5/_shared/install-application-server/multi-server/add-innovation-only/disable-debugger-code-analyser.md @@ -0,0 +1,18 @@ +1. Open a File Explorer. +1. Navigate to the Execution service directory, e.g. `%ProgramData%\SF\.\Fabric\work\Applications\Cortex.Innovation.Execution_App\ExecutionPkg.Code.27.3.0.25260` replacing `` with the `CustomerName` configured during [installation][Configure Installation Script], `` with the NETBIOS name of the server and `` with the highest number in the directory. +1. Open the `appsettings.json` file in a text editor. +1. Locate the `"FeatureFlags"` line located under `"ExecutionEngine"` and set the value to `["f4fd94c0-a921-4b34-b82c-378b05e91555"]`. +1. Save and close the file. +1. In the File Explorer, navigate to `%ProgramData%\SF\.\Fabric\work\ImageCache\Store\Cortex.Innovation.Execution\ExecutionPkg.Code.27.3.0.25260` replacing `` with the Customer Name and `` with the NETBIOS name of the server specified in step 2. +1. Repeat steps 3 - 5. +1. Open a web browser. +1. Navigate to `https://server.domain.com:9080/Explorer`, where `server.domain.com` is the fully qualified domain name of the server. Replace `9080` with new `httpGatewayEndpointPort` value if it was changed during configuration of the original installation. + + {{% alert title="Note" %}} +If a certificate error occurs, it will be necessary to import the certificate used in the `ServerCertificatePath` parameter when {{< ahref path="Cortex.GettingStarted.OnPremise.InstallInnovationOnly.MultipleServerWithHA.ConfigureDebuggerInstallationScript" title="Configuring the Installation Script" >}}. Instructions on how to do this can be found {{< ahref path="Cortex.Faqs.ImportClientCertificate.MultiServer" title="here" >}}. + {{% /alert %}} + +1. Expand `Cluster` then `Nodes`. +1. Restart the node by clicking on the drop down menu next to the node name and select `Restart`. Confirm node restart by following the on-screen instructions. + +[Configure Installation Script]: {{< ref "#configure-installation-script" >}} diff --git a/content/en/docs/2025.5/_shared/install-application-server/multi-server/add-innovation-to-7.2/disable-code-analyser.md b/content/en/docs/2025.5/_shared/install-application-server/multi-server/add-innovation-to-7.2/disable-code-analyser.md new file mode 100644 index 000000000..0802d7ce0 --- /dev/null +++ b/content/en/docs/2025.5/_shared/install-application-server/multi-server/add-innovation-to-7.2/disable-code-analyser.md @@ -0,0 +1,18 @@ +1. Open a File Explorer. +1. Navigate to the Execution service directory, e.g. `%ProgramData%\SF\.\Fabric\work\Applications\Cortex.Innovation.Execution_App\ExecutionPkg.Code.27.3.0.25260` replacing `` with the `CustomerName` configured during [installation][Configure Installation Script], `` with the NETBIOS name of the server and `` with the highest number in the directory. +1. Open the `appsettings.json` file in a text editor. +1. Locate the `"FeatureFlags"` line located under `"ExecutionEngine"` and set the value to `["f4fd94c0-a921-4b34-b82c-378b05e91555"]`. +1. Save and close the file. +1. In the File Explorer, navigate to `%ProgramData%\SF\.\Fabric\work\ImageCache\Store\Cortex.Innovation.Execution\ExecutionPkg.Code.27.3.0.25260` replacing `` with the Customer Name and `` with the NETBIOS name of the server specified in step 2. +1. Repeat steps 3 - 5. +1. Open a web browser. +1. Navigate to `https://server.domain.com:9080/Explorer`, where `server.domain.com` is the fully qualified domain name of the server. Replace `9080` with new `httpGatewayEndpointPort` value if it was changed during configuration of the original installation. + + {{% alert title="Note" %}} +If a certificate error occurs, it will be necessary to import the client certificate used in the `ClientCertificatePath` parameter when {{< ahref path="Cortex.GettingStarted.OnPremise.AddInnovationTo72.MultipleServerWithHA.ConfigureInstallationScriptNew" title="Configuring the Installation Script" >}}. Instructions on how to do this can be found {{< ahref path="Cortex.Faqs.ImportClientCertificate.MultiServer" title="here" >}}. + {{% /alert %}} + +1. Expand `Cluster` then `Nodes`. +1. Restart the node by clicking on the drop down menu next to the node name and select `Restart`. Confirm node restart by following the on-screen instructions. + +[Configure Installation Script]: {{< ref "#configure-installation-script" >}} diff --git a/content/en/docs/2025.5/_shared/install-application-server/multi-server/add-innovation-to-7.2/disable-debugger-code-analyser.md b/content/en/docs/2025.5/_shared/install-application-server/multi-server/add-innovation-to-7.2/disable-debugger-code-analyser.md new file mode 100644 index 000000000..f46367daf --- /dev/null +++ b/content/en/docs/2025.5/_shared/install-application-server/multi-server/add-innovation-to-7.2/disable-debugger-code-analyser.md @@ -0,0 +1,18 @@ +1. Open a File Explorer. +1. Navigate to the Execution service directory, e.g. `%ProgramData%\SF\.\Fabric\work\Applications\Cortex.Innovation.Execution_App\ExecutionPkg.Code.27.3.0.25260` replacing `` with the `CustomerName` configured during [installation][Configure Installation Script], `` with the NETBIOS name of the server and `` with the highest number in the directory. +1. Open the `appsettings.json` file in a text editor. +1. Locate the `"FeatureFlags"` line located under `"ExecutionEngine"` and set the value to `["f4fd94c0-a921-4b34-b82c-378b05e91555"]`. +1. Save and close the file. +1. In the File Explorer, navigate to `%ProgramData%\SF\.\Fabric\work\ImageCache\Store\Cortex.Innovation.Execution\ExecutionPkg.Code.27.3.0.25260` replacing `` with the Customer Name and `` with the NETBIOS name of the server specified in step 2. +1. Repeat steps 3 - 5. +1. Open a web browser. +1. Navigate to `https://server.domain.com:9080/Explorer`, where `server.domain.com` is the fully qualified domain name of the server. Replace `9080` with new `httpGatewayEndpointPort` value if it was changed during configuration of the original installation. + + {{% alert title="Note" %}} +If a certificate error occurs, it will be necessary to import the certificate used in the `ServerCertificatePath` parameter when {{< ahref path="Cortex.GettingStarted.OnPremise.AddInnovationTo72.MultipleServerWithHA.ConfigureDebuggerInstallationScript" title="Configuring the Installation Script" >}}. Instructions on how to do this can be found {{< ahref path="Cortex.Faqs.ImportClientCertificate.MultiServer" title="here" >}}. + {{% /alert %}} + +1. Expand `Cluster` then `Nodes`. +1. Restart the node by clicking on the drop down menu next to the node name and select `Restart`. Confirm node restart by following the on-screen instructions. + +[Configure Installation Script]: {{< ref "#configure-installation-script" >}} diff --git a/content/en/docs/2025.5/_shared/install-application-server/single-server/add-innovation-only/disable-code-analyser.md b/content/en/docs/2025.5/_shared/install-application-server/single-server/add-innovation-only/disable-code-analyser.md new file mode 100644 index 000000000..b62217f2b --- /dev/null +++ b/content/en/docs/2025.5/_shared/install-application-server/single-server/add-innovation-only/disable-code-analyser.md @@ -0,0 +1,18 @@ +1. Open a File Explorer. +1. Navigate to the Execution service directory, e.g. `%ProgramData%\SF\.\Fabric\work\Applications\Cortex.Innovation.Execution_App\ExecutionPkg.Code.27.3.0.25260` replacing `` with the `CustomerName` configured during [installation][Configure Installation Script], `` with the NETBIOS name of the server and `` with the highest number in the directory. +1. Open the `appsettings.json` file in a text editor. +1. Locate the `"FeatureFlags"` line located under `"ExecutionEngine"` and set the value to `["f4fd94c0-a921-4b34-b82c-378b05e91555"]`. +1. Save and close the file. +1. In the File Explorer, navigate to `%ProgramData%\SF\.\Fabric\work\ImageCache\Store\Cortex.Innovation.Execution\ExecutionPkg.Code.27.3.0.25260` replacing `` with the Customer Name and `` with the NETBIOS name of the server specified in step 2. +1. Repeat steps 3 - 5. +1. Open a web browser. +1. Navigate to `https://server.domain.com:9080/Explorer`, where `server.domain.com` is the fully qualified domain name of the server. Replace `9080` with new `httpGatewayEndpointPort` value if it was changed during configuration of the original installation. + + {{% alert title="Note" %}} +If a certificate error occurs, it will be necessary to import the certificate used in the `ServerCertificatePath` parameter when {{< ahref path="Cortex.GettingStarted.OnPremise.InstallInnovationOnly.SingleServerWithoutHA.ConfigureInstallationScriptNew" title="Configuring the Installation Script" >}}. Instructions on how to do this can be found {{< ahref path="Cortex.Faqs.ImportClientCertificate.SingleServer" title="here" >}}. + {{% /alert %}} + +1. Expand `Cluster` then `Nodes`. +1. Restart the node by clicking on the drop down menu next to the node name and select `Restart`. Confirm node restart by following the on-screen instructions. + +[Configure Installation Script]: {{< ref "#configure-installation-script" >}} diff --git a/content/en/docs/2025.5/_shared/install-application-server/single-server/add-innovation-to-7.2/disable-code-analyser.md b/content/en/docs/2025.5/_shared/install-application-server/single-server/add-innovation-to-7.2/disable-code-analyser.md new file mode 100644 index 000000000..53e2b87a8 --- /dev/null +++ b/content/en/docs/2025.5/_shared/install-application-server/single-server/add-innovation-to-7.2/disable-code-analyser.md @@ -0,0 +1,18 @@ +1. Open a File Explorer. +1. Navigate to the Execution service directory, e.g. `%ProgramData%\SF\.\Fabric\work\Applications\Cortex.Innovation.Execution_App\ExecutionPkg.Code.27.3.0.25260` replacing `` with the `CustomerName` configured during [installation][Configure Installation Script], `` with the NETBIOS name of the server and `` with the highest number in the directory. +1. Open the `appsettings.json` file in a text editor. +1. Locate the `"FeatureFlags"` line located under `"ExecutionEngine"` and set the value to `["f4fd94c0-a921-4b34-b82c-378b05e91555"]`. +1. Save and close the file. +1. In the File Explorer, navigate to `%ProgramData%\SF\.\Fabric\work\ImageCache\Store\Cortex.Innovation.Execution\ExecutionPkg.Code.27.3.0.25260` replacing `` with the Customer Name and `` with the NETBIOS name of the server specified in step 2. +1. Repeat steps 3 - 5. +1. Open a web browser. +1. Navigate to `https://server.domain.com:9080/Explorer`, where `server.domain.com` is the fully qualified domain name of the server. Replace `9080` with new `httpGatewayEndpointPort` value if it was changed during configuration of the original installation. + + {{% alert title="Note" %}} +If a certificate error occurs, it will be necessary to import the certificate used in the `ServerCertificatePath` parameter when {{< ahref path="Cortex.GettingStarted.OnPremise.AddInnovationTo72.SingleServerWithoutHA.ConfigureInstallationScriptNew" title="Configuring the Installation Script" >}}. Instructions on how to do this can be found {{< ahref path="Cortex.Faqs.ImportClientCertificate.SingleServer" title="here" >}}. + {{% /alert %}} + +1. Expand `Cluster` then `Nodes`. +1. Restart the node by clicking on the drop down menu next to the node name and select `Restart`. Confirm node restart by following the on-screen instructions. + +[Configure Installation Script]: {{< ref "#configure-installation-script" >}} diff --git a/content/en/docs/2025.5/_shared/install-application-server/single-server/add-innovation-to-7.2/disable-debugger-code-analyser.md b/content/en/docs/2025.5/_shared/install-application-server/single-server/add-innovation-to-7.2/disable-debugger-code-analyser.md new file mode 100644 index 000000000..db52010ad --- /dev/null +++ b/content/en/docs/2025.5/_shared/install-application-server/single-server/add-innovation-to-7.2/disable-debugger-code-analyser.md @@ -0,0 +1,18 @@ +1. Open a File Explorer. +1. Navigate to the Execution service directory, e.g. `%ProgramData%\SF\.\Fabric\work\Applications\Cortex.Innovation.Execution_App\ExecutionPkg.Code.27.3.0.25260` replacing `` with the `CustomerName` configured during [installation][Configure Installation Script], `` with the NETBIOS name of the server and `` with the highest number in the directory. +1. Open the `appsettings.json` file in a text editor. +1. Locate the `"FeatureFlags"` line located under `"ExecutionEngine"` and set the value to `["f4fd94c0-a921-4b34-b82c-378b05e91555"]`. +1. Save and close the file. +1. In the File Explorer, navigate to `%ProgramData%\SF\.\Fabric\work\ImageCache\Store\Cortex.Innovation.Execution\ExecutionPkg.Code.27.3.0.25260` replacing `` with the Customer Name and `` with the NETBIOS name of the server specified in step 2. +1. Repeat steps 3 - 5. +1. Open a web browser. +1. Navigate to `https://server.domain.com:9080/Explorer`, where `server.domain.com` is the fully qualified domain name of the server. Replace `9080` with new `httpGatewayEndpointPort` value if it was changed during configuration of the original installation. + + {{% alert title="Note" %}} +If a certificate error occurs, it will be necessary to import the client certificate used in the `ServerCertificatePath` parameter when {{< ahref path="Cortex.GettingStarted.OnPremise.AddInnovationTo72.MultipleServerWithHA.ConfigureDebuggerInstallationScript" title="Configuring the Installation Script" >}}. Instructions on how to do this can be found {{< ahref path="Cortex.Faqs.ImportClientCertificate.SingleServer" title="here" >}}. + {{% /alert %}} + +1. Expand `Cluster` then `Nodes`. +1. Restart the node by clicking on the drop down menu next to the node name and select `Restart`. Confirm node restart by following the on-screen instructions. + +[Configure Installation Script]: {{< ref "#configure-installation-script" >}} diff --git a/content/en/docs/2025.5/_shared/install-application-server/update-code-analyser.md b/content/en/docs/2025.5/_shared/install-application-server/update-code-analyser.md new file mode 100644 index 000000000..bd75d1fdb --- /dev/null +++ b/content/en/docs/2025.5/_shared/install-application-server/update-code-analyser.md @@ -0,0 +1,3 @@ +For assistance with configuring the Allowed list for the Code Analyser, please raise a case in the [{{% ctx %}} Service Portal][]. + +[{{% ctx %}} Service Portal]: {{< url path="Cortex.ServicePortal.MainDoc" >}} diff --git a/content/en/docs/2025.5/_shared/pre-installation/multi-server/make-artefacts-available.md b/content/en/docs/2025.5/_shared/pre-installation/multi-server/make-artefacts-available.md index f4683c4a9..90c9248b3 100644 --- a/content/en/docs/2025.5/_shared/pre-installation/multi-server/make-artefacts-available.md +++ b/content/en/docs/2025.5/_shared/pre-installation/multi-server/make-artefacts-available.md @@ -24,7 +24,7 @@ Unblock-File -Path .\Cortex.Innovation.Install.Preinstallation.ps1 ``` -1. Run the `Cortex.Innovation.Install.PreInstallation.ps1` script using the following command, modifying the `ApplicationServers` value to contain the NETBIOS names or fully qualified domain names of the Application Servers, the `WebApplicationServer` value to contain the NETBIOS names or fully qualified domain name of the Web Application Server and the `LoadBalancerServer` value to contain the NETBIOS names or fully qualified domain name of the Load Balancer Server (remove the `LoadBalancerServer` parameter if using an [alternative load balancer][]): +1. Run the `Cortex.Innovation.Install.PreInstallation.ps1` script using the following command, modifying the `ApplicationServers` value to contain the NETBIOS names or fully qualified domain names of the Application Servers, the `WebApplicationServer` value to contain the NETBIOS names or fully qualified domain name of the Web Application Server and the `LoadBalancerServer` value to contain the NETBIOS names or fully qualified domain name of the Load Balancer Server (remove the `LoadBalancerServer` parameter if using an [alternative load balancer][]): ```powershell .\Cortex.Innovation.Install.Preinstallation.ps1 -ApplicationServers @("app-server1", "app-server2", "app-server3") -WebApplicationServer "webapp-server" -LoadBalancerServer "lb-server" diff --git a/content/en/docs/2025.5/_shared/upgrade/2025.1/pre-upgrade/multi-server/make-artefacts-available.md b/content/en/docs/2025.5/_shared/upgrade/2025.1/pre-upgrade/multi-server/make-artefacts-available.md index 26cf275e7..ee64c3040 100644 --- a/content/en/docs/2025.5/_shared/upgrade/2025.1/pre-upgrade/multi-server/make-artefacts-available.md +++ b/content/en/docs/2025.5/_shared/upgrade/2025.1/pre-upgrade/multi-server/make-artefacts-available.md @@ -22,7 +22,7 @@ Unblock-File -Path .\Cortex.Innovation.Install.Preinstallation.ps1 ``` -1. Run the `Cortex.Innovation.Install.PreInstallation.ps1` script using the following command, modifying the `ApplicationServers` value to contain the NETBIOS names or fully qualified domain names of the Application Servers, the `WebApplicationServer` value to contain the NETBIOS names or fully qualified domain name of the Web Application Server and the `LoadBalancerServer` value to contain the NETBIOS names or fully qualified domain name of the Load Balancer Server (remove the `LoadBalancerServer` parameter if using an [alternative load balancer][]): +1. Run the `Cortex.Innovation.Install.PreInstallation.ps1` script using the following command, modifying the `ApplicationServers` value to contain the NETBIOS names or fully qualified domain names of the Application Servers, the `WebApplicationServer` value to contain the NETBIOS names or fully qualified domain name of the Web Application Server and the `LoadBalancerServer` value to contain the NETBIOS names or fully qualified domain name of the Load Balancer Server (remove the `LoadBalancerServer` parameter if using an [alternative load balancer][]): ```powershell .\Cortex.Innovation.Install.Preinstallation.ps1 -ApplicationServers @("app-server1", "app-server2", "app-server3") -WebApplicationServer "webapp-server" -LoadBalancerServer "lb-server" diff --git a/content/en/docs/2025.5/_shared/upgrade/2025.3/pre-upgrade/multi-server/make-artefacts-available.md b/content/en/docs/2025.5/_shared/upgrade/2025.3/pre-upgrade/multi-server/make-artefacts-available.md index e19493b84..eaa1316aa 100644 --- a/content/en/docs/2025.5/_shared/upgrade/2025.3/pre-upgrade/multi-server/make-artefacts-available.md +++ b/content/en/docs/2025.5/_shared/upgrade/2025.3/pre-upgrade/multi-server/make-artefacts-available.md @@ -22,7 +22,7 @@ Unblock-File -Path .\Cortex.Innovation.Install.Preinstallation.ps1 ``` -1. Run the `Cortex.Innovation.Install.PreInstallation.ps1` script using the following command, modifying the `ApplicationServers` value to contain the NETBIOS names or fully qualified domain names of the Application Servers, the `WebApplicationServer` value to contain the NETBIOS names or fully qualified domain name of the Web Application Server and the `LoadBalancerServer` value to contain the NETBIOS names or fully qualified domain name of the Load Balancer Server (remove the `LoadBalancerServer` parameter if using an [alternative load balancer][]): +1. Run the `Cortex.Innovation.Install.PreInstallation.ps1` script using the following command, modifying the `ApplicationServers` value to contain the NETBIOS names or fully qualified domain names of the Application Servers, the `WebApplicationServer` value to contain the NETBIOS names or fully qualified domain name of the Web Application Server and the `LoadBalancerServer` value to contain the NETBIOS names or fully qualified domain name of the Load Balancer Server (remove the `LoadBalancerServer` parameter if using an [alternative load balancer][]): ```powershell .\Cortex.Innovation.Install.Preinstallation.ps1 -ApplicationServers @("app-server1", "app-server2", "app-server3") -WebApplicationServer "webapp-server" -LoadBalancerServer "lb-server" diff --git a/content/en/docs/2025.5/_shared/upgrade/2025.5/pre-upgrade/multi-server/make-artefacts-available.md b/content/en/docs/2025.5/_shared/upgrade/2025.5/pre-upgrade/multi-server/make-artefacts-available.md index 2597d025a..c094d68c8 100644 --- a/content/en/docs/2025.5/_shared/upgrade/2025.5/pre-upgrade/multi-server/make-artefacts-available.md +++ b/content/en/docs/2025.5/_shared/upgrade/2025.5/pre-upgrade/multi-server/make-artefacts-available.md @@ -22,7 +22,7 @@ Unblock-File -Path .\Cortex.Innovation.Install.Preinstallation.ps1 ``` -1. Run the `Cortex.Innovation.Install.PreInstallation.ps1` script using the following command, modifying the `ApplicationServers` value to contain the NETBIOS names or fully qualified domain names of the Application Servers, the `WebApplicationServer` value to contain the NETBIOS names or fully qualified domain name of the Web Application Server and the `LoadBalancerServer` value to contain the NETBIOS names or fully qualified domain name of the Load Balancer Server (remove the `LoadBalancerServer` parameter if using an [alternative load balancer][]): +1. Run the `Cortex.Innovation.Install.PreInstallation.ps1` script using the following command, modifying the `ApplicationServers` value to contain the NETBIOS names or fully qualified domain names of the Application Servers, the `WebApplicationServer` value to contain the NETBIOS names or fully qualified domain name of the Web Application Server and the `LoadBalancerServer` value to contain the NETBIOS names or fully qualified domain name of the Load Balancer Server (remove the `LoadBalancerServer` parameter if using an [alternative load balancer][]): ```powershell .\Cortex.Innovation.Install.Preinstallation.ps1 -ApplicationServers @("app-server1", "app-server2", "app-server3") -WebApplicationServer "webapp-server" -LoadBalancerServer "lb-server" diff --git a/content/en/docs/2025.5/getting-started/on-premise/add-innovation-to-72/multiple-server-with-ha/installation/install-application-and-loadbalancer-servers.md b/content/en/docs/2025.5/getting-started/on-premise/add-innovation-to-72/multiple-server-with-ha/installation/install-application-and-loadbalancer-servers.md index 0f8752b85..27f2eba45 100644 --- a/content/en/docs/2025.5/getting-started/on-premise/add-innovation-to-72/multiple-server-with-ha/installation/install-application-and-loadbalancer-servers.md +++ b/content/en/docs/2025.5/getting-started/on-premise/add-innovation-to-72/multiple-server-with-ha/installation/install-application-and-loadbalancer-servers.md @@ -298,10 +298,24 @@ More advanced configuration (such as changing ports) can be undertaken by modify If the errors do not give any instructions on how to rectify, see [Troubleshooting During Installation][] for further information; if this does not help then please contact [{{% ctx %}} Service Portal][CORTEX Service Portal] for assistance. +## Configure {{% ctx %}} Code Analyser + +{{< section "/install-application-server/configure-code-analyser.md" >}} + +### Update Code Analyser Allowed List + +{{< section "/install-application-server/update-code-analyser.md" >}} + +### Disable Code Analyser + +On each of the Application Servers: + +{{< section "/install-application-server/multi-server/add-innovation-to-7.2/disable-code-analyser.md" >}} + ## Check Application Services 1. Log on to the Application Server. -1. Import the client certificate, used in the `ClientCertificatePath` parameter of the [Configure Installation Script][] section, to your Current User certificate store. Instructions on how to do this can be found [here][Import Client Certificate]. +1. If not already done so, import the client certificate, used in the `ClientCertificatePath` parameter of the [Configure Installation Script][] section, to your Current User certificate store. Instructions on how to do this can be found [here][Import Client Certificate]. 1. Open a web browser. 1. {{< section "/install-application-server/multi-server/check-application-services.md">}} diff --git a/content/en/docs/2025.5/getting-started/on-premise/add-innovation-to-72/multiple-server-with-ha/installation/install-web-application-server/perform-debugger-installation.md b/content/en/docs/2025.5/getting-started/on-premise/add-innovation-to-72/multiple-server-with-ha/installation/install-web-application-server/perform-debugger-installation.md index 24bd808d7..204f02379 100644 --- a/content/en/docs/2025.5/getting-started/on-premise/add-innovation-to-72/multiple-server-with-ha/installation/install-web-application-server/perform-debugger-installation.md +++ b/content/en/docs/2025.5/getting-started/on-premise/add-innovation-to-72/multiple-server-with-ha/installation/install-web-application-server/perform-debugger-installation.md @@ -43,10 +43,24 @@ If Windows Defender is not running on the server, ensure that the [Antivirus Exc {{< section "/install-application-server/single-server/add-permissions-to-crypto-folder.md">}} +## Configure {{% ctx %}} Code Analyser + +{{< section "/install-application-server/configure-code-analyser.md" >}} + +### Update Code Analyser Allowed List + +{{< section "/install-application-server/update-code-analyser.md" >}} + +### Disable Code Analyser + +On the Web Application Server: + +{{< section "/install-application-server/multi-server/add-innovation-to-7.2/disable-debugger-code-analyser.md" >}} + ## Check Application Services 1. Log on to the Web Application Server. -1. Import the client certificate, used in the `ClientCertificatePath` parameter of the [Configure Installation Script][] section, to your Current User certificate store. Instructions on how to do this can be found [here][Import Client Certificate]. +1. If not already done so, import the certificate, used in the `ServerCertificatePath` parameter of the [Configure Installation Script][] section, to your Current User certificate store. Instructions on how to do this can be found [here][Import Client Certificate]. 1. Open a web browser. 1. {{< section "/install-application-server/single-server/check-application-services.md">}} diff --git a/content/en/docs/2025.5/getting-started/on-premise/add-innovation-to-72/single-server-without-ha/installation/install-application-server.md b/content/en/docs/2025.5/getting-started/on-premise/add-innovation-to-72/single-server-without-ha/installation/install-application-server.md index bfe994f6c..213b19aab 100644 --- a/content/en/docs/2025.5/getting-started/on-premise/add-innovation-to-72/single-server-without-ha/installation/install-application-server.md +++ b/content/en/docs/2025.5/getting-started/on-premise/add-innovation-to-72/single-server-without-ha/installation/install-application-server.md @@ -43,10 +43,24 @@ If Windows Defender is not running on the server, ensure that the [Antivirus Exc {{< section "/install-application-server/single-server/add-permissions-to-crypto-folder.md">}} +## Configure {{% ctx %}} Code Analyser + +{{< section "/install-application-server/configure-code-analyser.md" >}} + +### Update Code Analyser Allowed List + +{{< section "/install-application-server/update-code-analyser.md" >}} + +### Disable Code Analyser + +On the Application Server: + +{{< section "/install-application-server/single-server/add-innovation-to-7.2/disable-code-analyser.md" >}} + ## Check Application Services 1. Log on to the Application Server. -1. Import the client certificate, used in the `ClientCertificatePath` parameter of the [Configure Installation Script][] section, to your Current User certificate store. Instructions on how to do this can be found [here][Import Client Certificate]. +1. If not already done so, import the certificate used in the `ServerCertificatePath` parameter of the [Configure Installation Script][] section, to your Current User certificate store. Instructions on how to do this can be found [here][Import Client Certificate]. 1. Open a web browser. 1. {{< section "/install-application-server/single-server/check-application-services.md">}} diff --git a/content/en/docs/2025.5/getting-started/on-premise/install-innovation-only/multiple-server-with-ha/installation/install-application-and-loadbalancer-servers.md b/content/en/docs/2025.5/getting-started/on-premise/install-innovation-only/multiple-server-with-ha/installation/install-application-and-loadbalancer-servers.md index b27238442..b1ec5555c 100644 --- a/content/en/docs/2025.5/getting-started/on-premise/install-innovation-only/multiple-server-with-ha/installation/install-application-and-loadbalancer-servers.md +++ b/content/en/docs/2025.5/getting-started/on-premise/install-innovation-only/multiple-server-with-ha/installation/install-application-and-loadbalancer-servers.md @@ -298,10 +298,24 @@ More advanced configuration (such as changing ports) can be undertaken by modify If the errors do not give any instructions on how to rectify, see [Troubleshooting During Installation][] for further information; if this does not help then please contact [{{% ctx %}} Service Portal][CORTEX Service Portal] for assistance. +## Configure {{% ctx %}} Code Analyser + +{{< section "/install-application-server/configure-code-analyser.md" >}} + +### Update Code Analyser Allowed List + +{{< section "/install-application-server/update-code-analyser.md" >}} + +### Disable Code Analyser + +On each of the Application Servers: + +{{< section "/install-application-server/multi-server/add-innovation-only/disable-code-analyser.md" >}} + ## Check Application Services 1. Log on to one of the Application Servers. -1. Import the client certificate, used in the `ClientCertificatePath` parameter of the [Configure Installation Script][] section, to your Current User certificate store. Instructions on how to do this can be found [here][Import Client Certificate]. +1. If not already done so, import the client certificate, used in the `ClientCertificatePath` parameter of the [Configure Installation Script][] section, to your Current User certificate store. Instructions on how to do this can be found [here][Import Client Certificate]. 1. Open a web browser. 1. {{< section "/install-application-server/multi-server/check-application-services.md">}} diff --git a/content/en/docs/2025.5/getting-started/on-premise/install-innovation-only/multiple-server-with-ha/installation/install-web-application-server/perform-debugger-installation.md b/content/en/docs/2025.5/getting-started/on-premise/install-innovation-only/multiple-server-with-ha/installation/install-web-application-server/perform-debugger-installation.md index 4a1c9902b..509d01f1e 100644 --- a/content/en/docs/2025.5/getting-started/on-premise/install-innovation-only/multiple-server-with-ha/installation/install-web-application-server/perform-debugger-installation.md +++ b/content/en/docs/2025.5/getting-started/on-premise/install-innovation-only/multiple-server-with-ha/installation/install-web-application-server/perform-debugger-installation.md @@ -43,10 +43,24 @@ If Windows Defender is not running on the server, ensure that the [Antivirus Exc {{< section "/install-application-server/single-server/add-permissions-to-crypto-folder.md">}} +## Configure {{% ctx %}} Code Analyser + +{{< section "/install-application-server/configure-code-analyser.md" >}} + +### Update Code Analyser Allowed List + +{{< section "/install-application-server/update-code-analyser.md" >}} + +### Disable Code Analyser + +On the Web Application Server: + +{{< section "/install-application-server/multi-server/add-innovation-only/disable-debugger-code-analyser.md" >}} + ## Check Application Services 1. Log on to the Web Application Server. -1. Import the client certificate, used in the `ClientCertificatePath` parameter of the [Configure Installation Script][] section, to your Current User certificate store. Instructions on how to do this can be found [here][Import Client Certificate]. +1. If not already done so, import the certificate used in the `ServerCertificatePath` parameter of the [Configure Installation Script][] section, to your Current User certificate store. Instructions on how to do this can be found [here][Import Client Certificate]. 1. Open a web browser. 1. {{< section "/install-application-server/single-server/check-application-services.md">}} @@ -59,7 +73,7 @@ If Windows Defender is not running on the server, ensure that the [Antivirus Exc 1. [Install Gateway][] [Antivirus Exclusions]: {{< url path="Cortex.GettingStarted.OnPremise.InstallInnovationOnly.MultipleServerWithHA.AntivirusExclusionsNew" >}} -[Configure Installation Script]: {{< url path="Cortex.GettingStarted.OnPremise.InstallInnovationOnly.MultipleServerWithHA.ConfigureDebuggerInstallationScript" >}} +[Configure Installation Script]: {{< ref "#configure-installation-script" >}} [Import Client Certificate]: {{< url path="Cortex.Faqs.ImportClientCertificate.MultiServer" >}} [Import Root Certificate]: {{< ref path="#import-root-certificate" >}} [Install Gateway]: {{< url path="Cortex.GettingStarted.OnPremise.InstallInnovationOnly.MultipleServerWithHA.GatewayInstallationNew" >}} diff --git a/content/en/docs/2025.5/getting-started/on-premise/install-innovation-only/single-server-without-ha/installation/install-application-server.md b/content/en/docs/2025.5/getting-started/on-premise/install-innovation-only/single-server-without-ha/installation/install-application-server.md index a407ec1be..5299b177d 100644 --- a/content/en/docs/2025.5/getting-started/on-premise/install-innovation-only/single-server-without-ha/installation/install-application-server.md +++ b/content/en/docs/2025.5/getting-started/on-premise/install-innovation-only/single-server-without-ha/installation/install-application-server.md @@ -43,10 +43,24 @@ If Windows Defender is not running on the server, ensure that the [Antivirus Exc {{< section "/install-application-server/single-server/add-permissions-to-crypto-folder.md">}} +## Configure {{% ctx %}} Code Analyser + +{{< section "/install-application-server/configure-code-analyser.md" >}} + +### Update Code Analyser Allowed List + +{{< section "/install-application-server/update-code-analyser.md" >}} + +### Disable Code Analyser + +On the Application Server: + +{{< section "/install-application-server/single-server/add-innovation-only/disable-code-analyser.md" >}} + ## Check Application Services 1. Log on to the Application Server. -1. Import the client certificate, used in the `ClientCertificatePath` parameter of the [Configure Installation Script][] section, to your Current User certificate store. Instructions on how to do this can be found [here][Import Client Certificate]. +1. If not already done so, import the certificate used in the `ServerCertificatePath` parameter of the [Configure Installation Script][] section, to your Current User certificate store. Instructions on how to do this can be found [here][Import Client Certificate]. 1. Open a web browser. 1. {{< section "/install-application-server/single-server/check-application-services.md">}} diff --git a/content/static/2025.5/pdf/Installation Checklists - Multiple Server With HA.pdf b/content/static/2025.5/pdf/Installation Checklists - Multiple Server With HA.pdf index 2b4999564..2a93c68f7 100644 Binary files a/content/static/2025.5/pdf/Installation Checklists - Multiple Server With HA.pdf and b/content/static/2025.5/pdf/Installation Checklists - Multiple Server With HA.pdf differ diff --git a/content/static/2025.5/pdf/Installation Checklists - Single Server Without HA.pdf b/content/static/2025.5/pdf/Installation Checklists - Single Server Without HA.pdf index 37d9c4fb0..5adc4876d 100644 Binary files a/content/static/2025.5/pdf/Installation Checklists - Single Server Without HA.pdf and b/content/static/2025.5/pdf/Installation Checklists - Single Server Without HA.pdf differ diff --git a/content/static/word/Installation Checklists - Multiple Server With HA.docx b/content/static/word/Installation Checklists - Multiple Server With HA.docx index fb104d59f..a843a5fb2 100644 Binary files a/content/static/word/Installation Checklists - Multiple Server With HA.docx and b/content/static/word/Installation Checklists - Multiple Server With HA.docx differ diff --git a/content/static/word/Installation Checklists - Single Server Without HA.docx b/content/static/word/Installation Checklists - Single Server Without HA.docx index ba0c52c68..462e5a126 100644 Binary files a/content/static/word/Installation Checklists - Single Server Without HA.docx and b/content/static/word/Installation Checklists - Single Server Without HA.docx differ